Used Ess 350 for sale (79,676)

Condition: used, Pressure control directional valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block Cedpfxjb S Htpe Aflshf -Type: 5350210030 -Price: per piece -Number: 10x available -Weight: 0.2 kg

Condition: used, Year of construction: 2013, operating hours: 14 h, functionality: fully functional, machine/vehicle number: TJ-350-20/40 KPSI //TJ-160-20/40 KPSI, total width: 1,500 mm, total length: 3,000 mm, total height: 2,500 mm, pressure: 2,800 bar, operating pressure: 2,800 bar, fuel: diesel, overall weight: 3,000 kg, rotational speed (min.): 700 rpm, rotational speed (max.): 1,500 rpm, high-pressure hose length: 60,000 mm, year of last overhaul: 2025, Equipment: rotational speed infinitely variable, A Bundle of 5 ea. UHP waterblast machines, c/w a vast variety of spares and accessories, as follows: 1 x High-Pressure Water Jet Unit with Deutz-MWM V-8 Diesel Engine adjustable pressure 0–1400 bar and 0–2800 bar, dump system, with plunger changeout kit as follows: 1400 bar at 99 liters/minute, and 2800 bar at 46 liters/minute. The fluid head of this pump, including stuffing boxes and valves will be used for both 1400 bar and 2800 bar. Cedpfx Asxc E Trofljhf Changing pressure range between 1400 and 2800 Bar is carried out by a simple and easy plunger changeout. The unit was built in 2013 and kept operational as a backup machine, but was only used once for 14 hours at 2800 bar for a bundle heat exchanger cleaning project. This UHP machine is mounted on a zinc coated steel skid. The Deutz-MWM engine was purchased as a used engine, with approx. 3,000 operating hours , and was fitted in 2013 with a new Jetech UHDW high-pressure water jet pump. In addition, a large amount of accessories and spare parts are included, such as dump guns & foot valves, swivel joints, surface cleaners, rotary nozzles, high-pressure lances, nozzle inserts, seals, special tools, etc. An identical UHP waterblast unit is also available, but with a Scania V-8 engine and counting 850 operating hours at max. 1400 bar / 99 liters/minute. That unit is housed in a 20ft. container, with an 800 l Diesel Tank, a work bench /vise, Furthermore, there are 3 additional high-pressure water jet units with 110 kW power each, 2 of which have Volvo TD71A Diesel Motors, plunger changeout kits for 1400 and 2800 bar. A third unit is a Kamat K11000 with 2800 Bar OP. and a JCB Dieselmax engine. Also available is a hydraulic heat exchanger cleaning device with a rotating lance mounted on a scissor lift table, suitable for very large heat exchangers. All equipment comes from the closure of my company due to retirement. A buyer is sought for all machines and accessories as a complete package. Price for the complete package 150000 € , pick up only, at D-36404 Vacha/Germany, or delivery in germany subject to additional fees.

Condition: good (used), Plastic injection molding machine : Chjdpeik H Enefx Afljf Brand: BMB Type: KW650/3500 650 tons Year: 1999 Weight: 32500kg Power : 128 kW Distance between H-V columns: 860x760mm Min-max mold thickness: 250-900mm Movable platen stroke: 1000mm Recent parts installed on the press: 04/2020: hydraulic safety valve on mold-holding platen: €1414 07/2021 : Hydraulic pump + coupling : 4666.74€ HT 07/2022 : More than 5000€ spent on electronic cards Optional robot: €7,000 Brand : Sepro Type : SR 4030 S3 Year : 01-08-2006

Condition: excellent (used), Cross-cut saw Velox 350 with roller conveyor approx. 5000 mm Machine ready for immediate use 1.5 kw, 380 Volt Chedpfx Ajt Ta Ursflef 2 speeds Double miter cuts possible

Condition: used, Year of construction: 2000, faceplate diameter 3200 mm swing diameter 3500 mm turning height 2200 mm range L-W-H 7730 x 6240 x 6700 mm control Typ 840 D sl voltage 3 x 400 V frequency 50 Hz turning speeds 0,8 - 40 U/min max. turning diameter 3500 mm total power requirement 51 kW weight of the machine ca. 86 t Technical specifications Machine type: CNC vertical lathe Manufacturer: Rafamet Year of manufacture: 1973 conventional General overhaul with control retrofit 2010 Control upgrade 2016 Control: Siemens 840 D Sl Condition: very good faceplate Turning diameter of the faceplate 3,200 mm Number of rotation stages of the face plate 3 (infinitely variable) Speed ??ranges of the faceplate 0.8 - 40 rpm Level I 0.8 – 3 rpm Level II 0.8 - 11 rpm Level III 0.8 – 40 rpm processing of workpieces Max. turning diameter 3,500 mm Max. turning height of the workpieces above the faceplate 2,200 mm vertical supports Smallest axis distance between the vertical supports 470 mm Largest ram travel of the left vertical support 985 mm Largest ram travel of the right vertical support 985 mm Axis Feeds - Infinitely variable feed Max.: X1.2 3m/min max.: z1.2 2.5 m/min Plunger cannot be pivoted Support — crossbar Rapid feed of the cross beam 600 mm/min Larger distance of the cross beam to the faceplate 2,300 mm load sizes +Permissible turning force when turning workpieces with a turning diameter of 2,000 mm and a turning speed of 20 m/min. 8,000kg +Largest chip cross-section for workpieces made of steel Fz = 50 kg/mm² at a turning speed of 20 m/min for all supports 45 mm² +Largest chip cross-section for workpieces made of steel Fz = 50 kg/mm² at a rotation speed of 20 m/min for a vertical support with max. plunger length 985 mm 2.5 mm² +Largest chip cross-section for cast iron workpieces HB = 160 kg/mm² Chsdpfouddcgox Aflof at a turning speed of 20 m/min for all supports 120 mm² +Largest chip cross-section for cast iron workpieces HB = 160 kg/mm² at a rotation speed of 20 m/min for a vertical support with max. plunger length 985 mm 22.5 mm² +Largest permitted workpiece weight at 0.8 - 3.15 rpm 17,500 kg +Largest permitted workpiece weight at 4 - 40 rpm 7,500 kg electric motors Main drive motor power and revolutions 51 kW Power of the feed motors of: - Vertical support beam (2 pieces) 16 Nm (gear 1:10) - Tappet (2 pieces) 16 Nm (gear 1:12) Power and revolutions of the drive motor of the hydraulic pumps (2 pieces) 3kW - 1,500 rpm Power and revolutions of the clamp hydraulic motor of the vertical support beam 1.5 kW - 1,500 rpm Power and rotation for crossbar adjustment 15 kW - 1500 rpm 3.5 Information on the compressed air supply and other consumables Compressed air connection: 6 bar free of oil and water 3.6 Energy Consumption Conditions Voltage: 3 x 400V Control Voltage: 24V Frequency: 50Hz Fusing: 315 A Main dimensions and weight of the machine Length 7,730mm Width 6,240mm Height: 6,700mm Weight: 85,750 kg Tool: Capto 60 recording Not powered front panel Turning diameter of the front plate 3,200 mm Clamping disc diameter 3,400 mm Number of rotation levels of the front panel 3 (continuously adjustable) Front panel speed ranges 0.8 - 40 rpm Level I 0.8 - 3 rpm Level II 0.8 - 11 rpm Level III 0.8 - 40 rpm processing of workpieces Max. turning diameter 3,500 mm Max. turning height of the workpieces above ...

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, operating pressure: 350 bar, pressure: 350 bar, fuel: diesel, power: 3 kW (4.08 HP), New High Pressure Unit Also looking for a New HD unit, we make them to measure for you, here we introduce our latest HD unit, this is unique and is a real all-rounder that has not yet been offered in this way by anyone!!!. Details VIHT2350/20/40/100 (demo) Motor 30 kW at 1500 rpm / 36 kW at 1750 rpm 2 x mazzoni pump 21 liters per minute per pump!!! at 1450 rpm set to 350 bar. Due to the low speed, this engine is nice and quiet. Pressure control by speed and manual adjustment of 2x zero 350 valves, hoses virtually pressureless (10 bar) with closed handle. this allows you to work safely because the hoses and pumps are virtually pressureless, and they build up the pressure when the handle is opened. 2 x burners for making hot water up to 120 degrees, on request we can also offer V+ Steam where we have 140 degrees at the nozzle. This machine makes it possible for 2 employees to work independently at the same time. so with different temperatures and pressure. the drive is specially developed and ensures a long life and easy maintenance. on board are 2 diesel tanks, 1x90 liters for the engine and 1x90 liters for the burners. The machine is developed in such a way that it can run 24 hours a day. it is also equipped with 2 water tanks of 325 liters each, so you have 650 liters of water in stock. The Vibemo easy start panel gives you protection against overheating and low oil level (engine stops) and indicates by means of a sign what is wrong. there is also a protection for low water level, and valve open during operation. You can also check the operating hours, speed and dynamo charging current here. The temperature control is made simple and shows the set and actual temperature. Csdpfx Asrnkgisflohf As an extra, we have mounted a 3-way tap as standard that allows you to spray with 350 bar and 40 liters per minute (also with hot water up to 100 degrees max). so it can also be used for example for sewer cleaning or stable cleaning. Furthermore, it is equipped with an emergency stop, internal lighting in the engine room and in the reel room. Reels are made of high-quality stainless steel, just like the burners. Hoses are all standard 50 meters long. Furthermore, equipped with pre-filter water, an intermediate filter per pump. 2 x handle, with 2 x lance flat jet 25 degrees 20 liters, 2 x lance with dirt fear 20 liters, 1 x lance flat jet 25 degrees 40 liters, 1 x lance with dirt fear 40 liters. 2 x pressure gauge for reading the set pressure. 3 x level measurement for diesel tanks and water tank, so everything neat and tidy. Everything built in tandem axle trailer 2500kg lxbxh 300x150x150 We provide a 1 year warranty and a full service package. Delivery time approx. 6 to 8 weeks. Photos are an example and may therefore differ slightly from reality.

Condition: good (used), Container turning device, welding turning device, roller stand -Roller stand: wheels Ø 125 x 35 mm -Roller spacing: 140 mm Codpfx Afev A Sztslohf -Quantity: 1 piece available -Dimensions: 350/80/H170 mm -Weight: 6.6 kg

Year of construction: 2024, condition: used, machine/vehicle number: ITJ840879, Neue Ausstellungsmaschine! Listenpreis: 13.585,- € #4152018486 Beschreibung: Chodpfx Afjutux Selof Langlebige, direkt angetriebene Verdichterblöcke Höchster Bedienkomfort durch elektronische Steuerung AIR ENERGIE CONTROL 3+ mit Drehrichtungskontrolle, Anzeige der Betriebsstunden, Wartungsplan, Servicemeldungen, Laststunden, etc. Mit integriertem Kältetrockner Kältetrockner DK 1200 SMART montiert auf Behälter Betriebsfertige Anlage dank integriertem Kältetrockner Optimale Abpassung an den tatsächlichen Luftverbrauch durch Drehzahlregelung Einfache Handhabung und höchster Bedienkomfort durch leicht verständliche elektronische Steuerung Wenig Platzbedarf durch kompakte Abmessungen Enorme Zeit- und Kostenersparnis im Wartungsfall durch leicht zugängliche Anordnung aller Wartungsteile und durch Direktantrieb Äußerst geräuscharm durch schallgedämmtes Gehäuse Einfache Montage eines Abluftkanals dank Abluftführung nach oben Verhinderung teurer Schäden bei der Inbetriebnahme dank integrierter Drehrichtungskontrolle TIPP: Schraubenkompressoren mit integriertem Kältetrockner auf Behälter sind enorm platzsparend und garantieren eine hohe Luftqualität Technische Daten: Verdichtungsenddruck: 12,5 bar Arbeitsdruck: 5-12,5 bar Volumenstrom bei Arbeitsdruck (ISO 1217): 270-1.224 l/min Verdichterdrehzahl bei 7 bar: 5.023 min-1 Nennleistung Antriebsmotor (V/Hz): 7,5 kW (400V/50Hz) Schutzart Antriebsmotor IP 55 Schalldruckpegel (LPA1 ?DIN 45635 T13): 64 dB(A) Anschluss Luftabgang: 3/4i Behälterinhalt: 500 l Abmessungen (B x T x H): 1935 mm x 655 mm x 1680 mm Gewicht: 427 kg Technische Daten-Kältetrockner DK 1200 SMART: Volumenstrom bei Drucktaupunkt +3°C: 1200 l/min Druck: 7 bar Druckverlust: 0,25 bar Spannung: 230 V/50 Hz Leistungsaufnahme: 0,23 kW Luftanschluss: 3/4 a Kältemittelfüllung: R134a

Condition: excellent (used), Year of construction: 2008, Technical Data: Working length: 3550 mm Stand width: 3050 mm Press force: 230 tons CNC control: CYBELEC ModEva 12S controlled axes: Y1/Y2; X1/X2; R; Z1/Z2 Stroke: 550 mm Throat depth: 410 mm Mounting height: 745 mm (extra high) Table width: 140 mm Working height: 1065 mm CNC-controlled crowning CE marking Motor power: 42 kW Dimensions (length x width x height): approx. 4650 x 2350 x 3100 mm Weight: approx. 25 tons Csdpfx Ajwntqxoflshf Accessories: 2 pcs. CNC-controlled bending aids, front side 1 pc. CNC-controlled bending aid, rear side!!! The seller is not liable for typing or data transmission errors. The machine corresponds in appearance, technology, and wear to its age; used machines are sold without any warranty.

Condition: ready for operation (used), A fully pneumatic Polzer glazing press is available. Clamping height: 2300mm, total press height: 2600mm, roller conveyor width: 170mm, roller conveyor height: 250mm, total depth: 1000mm, clamping width: 3500mm, total width: 4500mm. Documentation available. On-site inspection is possible. Chsdowu E A Topfx Aflof

Condition: new, Year of construction: 2025, table size: 3000mm x 1500mm pressure: -0,85 bar Csdemftlyjpfx Afljhf machine length: 3100mm machine width: 1450mm weight: 480kg

Year of construction: 2003, condition: excellent (used), SEALPAC 350 ID.NO. 2435 Chsdeixqmnopfx Aflef Sealpac 350 thread sealer vacuum / gas machine year mod 1999. Very nice condition little used since new! Tool dimensions 530 x 325 mm (Halfgastro) Dimensions 400 x 75 cm H 180 cm.

Condition: used, Digital ruler for press brakes, bending benches, guillotine shears... Glass ruler, glass measuring rod, scale, digital display, measuring rod, length measuring system, length measuring device, linear scale, positioning display, digital scales, linear encoder Chedpfxjrdil He Aflef -Manufacturer: RSF Elektronik, linear encoder from press brake HACO type PPES 30135 -Type: MSA 3502 -Measuring length: approx. 270 mm -Quantity: 2x encoders available -Price per piece -Dimensions: 500/150/H50 mm -Weight: 5.4 kg/pc.

Condition: new, ELMAG Stone cutting machine (incl. slide) STM 600/350, 230 Volt STM 610/350 The impressive stone cutting machines deserve a closer look due to their robustness, perfect handling and, last but not least, a very good price/performance ratio. It simply cuts everything: tiles, exposed aggregate concrete slabs, paving stones, marble and granite, bricks, clinker, artificial stone ... Ideal for construction companies, gardening firms and pavers. ADVANTAGES Lockable spring tensioner for resetting in two saddle bearings S1 water pump Disc cooling with metering valve Powerful drive motor 2.2 kW / 230 V Safety switch with zero-voltage release Long service life: roller table steel rollers above water Cedot Hvlgjpfx Aflshf Precise: Adjustable longitudinal stop, measuring scale Unsurpassed cutting unit for very large cutting depth in reverse cut. Includes segmented diamond blade for universal use TECHNICAL DATA Cutting capacity depth/length 105 / 600 mm Diamond blade Ø 350 mm Diamond blade bore 25.4 mm Rated power 2.2 kW Voltage/frequency 230/50 V/Hz Dimensions 1130x570x1600 mm Weight 72 kg

Condition: used, High-pressure radial fan, dust extractor fan, exhaust gas extractor, welding smoke extractor, extractor, fan, pressure fan, vacuum fan Cedpfxedz Umij Aflshf -Motor power: 1.1 kW -Speed: 2870 rpm -Volume output: m³/h -Pressure increase: Pa -Connection inlet: Ø 270 mm (without nozzle) -Connection output: 100 x 140 mm -Number: 1x fan available -Price: per piece -Dimensions: 540/400/H775 mm -Weight: 40.5 kg

Condition: used, Folding former, folding machine, form folding machine, profiling machine, profiling system, slat production, blind production -Length measuring device: used for slats/blinds production -Rotary encoder: Heidenhain ROD 426.003 - 1000 -Pneumatic components: Manufacturer Festo Codpjgal A Dofx Aflshf -Dimensions: 350/400/H1130 mm -Weight: 80 kg

Condition: excellent (used), Flat gear motor, gearbox, spur gear, angle gear, worm gear, Movigear, flat gear, flat gear -Gearbox: Parallel shaft gear box, without type designation SEW EURODRIVE Parallel shaft gear motor series F..DR.. -Drive: without electric motor Chsdst Sz Htepfx Aflof -Part No.: M17 GH 3 250613 -Translation: i= 38 -Hollow shaft: Ø 90 mm -Recess for motor: Ø 250 mm -Bolt circle for engine: Ø 300 mm -Dimensions: 720/350/460 mm -Weight: 226 kg

Condition: used, 2 column punching tool, separating tool, punching tool, punch, punching die, punching punch, -2 pillars: punching tool -Admission: M20 fine thread -Dimensions: 270/350/H335 mm -Weight: 132 kg Codpfedxxrqox Aflehf

Condition: used, Die cutter, punching machine, punching device, hole punching machine, hole punch, copy punch, stop punch, hole punch, eccentric punch, row hole punch, punching machine, punch press -Box tube punch: 50 x 30 mm -Round tube punch -Coordinates stop -Projection: 155 mm Csdpfxsb A I Hdj Aflohf -various tool with you -Punch quick change system -Page and depth stops -Max. Punching capacity: 36 t -2x quick change tool carrier -Weight: about 2000 kg

Condition: good (used), Core for crane traverse, adjustable traverse, crane traverse, hall crane, crane hook traverse, load traverse, heavy load traverse, Cedpfsv Hm Szsx Aflehf -Heartpiece: for crane traverse, sheet metal upper traverse .: 1031 4140 G-12-02-02 -Dimensions: see photos -Quantity: 2 pieces available -Price: per piece -Transport dimensions: 350/180/H310 mm -Weight: 17.7 kg/piece

Condition: used, Clamping angle for workpiece clamping, measuring device -Dimensions: 400/350/H230 mm Codpfx Ascvpubsflohf -Thickness: 35 mm -Groove: 15 mm -Surface: milled -Weight: 48 kg

Condition: good (used), T-slot plate, clamping plate with dovetail slots, plate field, welding table, welding table Chjdpfx Asmydncoflof -Intermediate plate: for hydraulic press eccentric press -Opening: 150 x 100 mm -Groove width: 18 mm -Hole spacing: 200 x 250 mm, Ø 14 mm -Dimensions: 480/350/H60 mm -Weight: 66 kg

Condition: used, Lifting jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, lifting jack thread Chodpfx Asgtu Uqsflsf -Load racks: 6 pieces, 450 mm height -Base plate: 450 x 350 x 20 mm -Shäkel plate: 146 x 146 mm, M42 2 pieces with shäkel -Price: complete -Dimensions: 450/350 / H450 mm -Weight: 60 kg / pc.

Condition: used, Frame press, gluing press -operated: hydraulic -Working area up to: 3500 x 2400 mm Csdpsb A H Dhofx Aflohf -Wood clamping: pneumatic -Display dimensions: 4200/1100 / H3700 mm -Transport dimensions: 4200/1200 / H2300 mm -Weight: approx. 3500 kg

Condition: used, Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Groove: 32 mm wide -Square: 95 x 35 mm Chjdpfx Afeb A Rulelof -Length: 3500 mm -Weight: 70 kg