Used Ex Press Center for sale (31,483)

Condition: as good as new (ex-display), Year of construction: 2024, New hydraulic heating plate press Manufacturer: ITALPRESSE, Type XL/6 30-13 with gold-anodized plates Touch display control - Electric heating plates, 3,000 x 1,300 mm - Total pressure: 90 tons - Number of heating plates: 2 pcs. - Number of tiers: 1 pc. - Cylinder stroke: 350 mm - Tier opening: 350 mm - All-side loading - Number of pressure cylinders: 6 pcs. - Diameter of pressure cylinders: 85 mm - Power requirement of hydraulic unit: 3 kW - Electric heating plates made of solid, hard aluminum with built-in heating wires - Heating power: 22 kW - High-pressure insulation plates - Working temperature: 90° C - Max. temperature: 120° C - Operating voltage: 400 V/50 Hz - Safety regulations according to CE standard Standard equipment: - Movement of the press table with rack and pinion and parallel guides at 2 corners of the press table, made of self-lubricating material - Electronic control unit with touch screen for controlling and monitoring the machine - Digital timer for setting the pressing time and automatic opening - Digital input and monitoring of the pressing pressure - Digital timer for setting the pressing time - Digital diagnostics and display of error messages - Safety circuit with two-hand operation - Safety pull cord - Safety bracket for the lower press table Bsdpfsdx R Tfjx Ab Dell Integrated accessories: - Touch screen TS/400 - EFC Electronic flatness control - Gold-anodized heating plates (bus bars) Location: In stock at 54634 Bitburg - Immediately available -

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Fanuc Robodrill T14iA Vertical Machining Centre for sale. 1998 model with 8,000 rpm spindle and 14 tool ATC. SPECIFICATION Traverses X Axis 500mm Y Axis 380mm Z Axis 300mm Spindle Nose to Worktable Minimum 250mm Blsdpfjnq Dgujx Ab Djl Maximum 550mm Work Table Table working surface 650 x 400mm Table loading capacity (uniform load) 200kg Table surface configuration Number of T slots 3 Width 14mm Pitch 125mm Machine Dimensions Width 1550mm Depth 1900mm Height (min/max) 2067 / 2367mm Weight (approximately) 2100kg Spindle Speed range 100 – 8,000rpm Taper BT30 Feedrates Rapid traverse rate 48m/min Feedrate 1 – 30,000mm/min Toolchanger ( MAS BT30 Tools) Tool storage capacity 14 tools Tool change time – cut to cut 0.9 secs (2kg) Tool Diameter 80mm Tool Length 200mm Tool Weight 2Kg Coolant tank capacity 100 litres CNC Control System Fanuc Series 16iM Electrical Supply 415V, 3 ph , 50Hz Compressed Air Supply 5kgf/cm2 (100 litres/min) MACHINE EQUIPPED WITH:- Coolant system Lighting Enclosed guarding

Condition: new, functionality: fully functional, EUROPA eturn VS390. The workhorse of any workshop or toolroom, a 390mm swing over the bed and choices of 760, 1000 or 1250mm between centres. Newall DRO and Bison Chucks are standard across the Europa Lathe Range. Machine Specification EUROPA eturn VS390 Swing over bed 390mm Blsdpfx Abjnzhtws Del Centre height 190mm Swing over cross slide 240mm Swing in gap 610mm Spindle Nose D1-6 (Camlock) Spindle Bore 54mm The EUROPA eturn VS390 Series is a gap bed centre lathe with a 390mm swing over the bed, 610mm in the gap and is available in three distance between centres. 750mm (30”), 1000mm (40”) and 1250mm (50”). Colchester Triumph sized machine. EEMT: Europa Energy Management Technology: The machine switches to a ‘sleep mode’ once a preset time limit has passed of inactivity. One press of a safety button and the machine is ready for operation. Reducing energy overheads. BISON: Bison 250mm dia 3 jaw scroll & 4 independent Jaw chucks with hard jaws are supplied as standard equipment. Manufactured in Europe, BISON chucks are manufactured to DIN55029, ISO702/11 standards for accuracy. NEWALL: A NEWALL NMS300 Digital Readout is professionally fitted and located on the saddle for operator ease of operation in mind. It makes so much sense, to install the DRO close to where the operator has his turning tool. The DRO travels with the machine. ELECTRONIC Variable Spindle Speed: Each model features a Schneider inverter controlling the spindle for exact turning requirements allowing you to select the correct turning speed for the job in hand. No hidden costs! Machine ready for turning: A Quick Change Toolpost complete with a set of toolholders ensures the EUROPA eturn VS lathe is supplied ‘ready for operation.’ DIN8605: An industry recognised quality standard, the entire range of EUROPA eturn VS lathes are built to the demanding toolroom standards of DIN8605

Condition: excellent (used), Year of construction: 2015, Maximum cutting diameter 640mm, maximum cutting length 1100mm, bar capacity 80mm, B axis -120/+105 degrees, C axis 0.001 degrees, Spindle power 18.5Kw, spindle speed 3,500 rpm, milling power 15Kw, milling speed 12,000 rpm, sub spindle speed 3,500 rpm, 40 station ATC, Bledott Nrtopfx Ab Dol Y axis travel -/+ 125mm, Fanuc 31i control, magazine barfeed, swarf conveyor, parts catcher.

Condition: new, Year of construction: 2024, Axis distance: 920 mm X-axis: 3000 mm Material thickness: Z 12 mm - 30 mm Feed rate: 20 m/min. A-axis: 360 degrees Minimum dimensions: Plate: x = 300 mm Y = 120 mm z = 12 mm The machine is equipped with a 4-position drill chuck and a saw blade. Maximum and minimum hole diameters that can be drilled: 3 - 35 mm The saw blade moves in the X-direction. Bledpscnz H Hsfx Ab Dsl Max. cutting depth with saw blade: 10 mm Motor: 0.75 HP, 400 volts Required extraction capacity: 2300 m3/h Location: In stock, 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2018, turning diameter max. 356 mm turning length 705 mm control M730 UM Mapps CELOS greates pass round over bed 920 mm Swing dia. over traverse guideway 742 mm turning speed range - main spindle 4.000 min/-1 power capacity - main spindel 18,5 / 15 kW spindle nose JIS A2-8 spindle bore 80 (91) mm C-Axis 0,001 ° Spindle speed range subspindle 6.000 min/-1 power capacity - Sub spindle 11 / 7,5 kW spindle bore 43 mm C-Axis 0,001 ° Bedpfx Absvy Ig Hs Dell x-travel 260 mm z-travel 795 mm Y - Axis +/-50 mm rapid traverse ( X / Y / Z ) 30 / 10 / 30 m/min number of toolpositions 12 pos. Schank height for square tool 25 mm Drill shank diameter 50 mm turret change time 0,27 sec. Spindle speed - driven tools max. 10.000 min -1 power capacity - driven tools 5,5 / 4,2 kW total power requirement 41 kVA weight of the machine ca. 6,4 t dimensions of the machine ca. 5,0 x 3,0 x 2,3 m CNC - Turning- and MillingCenter DMG MORI - NLX 2500 SY / 700 - Subspindle - Tool-Drive - C, Y-Axis - approx. 12,000 operating hours

Condition: used, Year of construction: 2015, machine/vehicle number: 663462, functionality: fully functional, Specification: Min./max. air pressure: 0.4/0.6 MPa; 4/6 bar Max. pressing force: 50 kN Total stroke: 150 mm Power stroke: 7 mm Type: STE341-7210 SF device Bedpfxewtgpxj Ab Djll Power: 0.5 kW Power supply: 230/3/50-60 V/A/Hz Control voltage: 24 VDC Protection rating: IP54 Pre-fuse: 16 A The TOX Pressotechnik hydropneumatic press EEB 008.061.A.001 is a versatile and powerful solution for precise forming and assembly operations in industrial manufacturing. It combines the advantages of hydraulics and pneumatics to ensure consistent force transmission and high accuracy. The robust design ensures long service life and reliable operation, while the user-friendly control system enables easy handling.

Condition: new, Year of construction: 2026, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams Bodsw Sgnkopfx Ab Dell - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Available: at short notice

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 016-018828-450, SPECIFICATION Table 914mm x 500mm X axis traverse 830mm Y axis traverse 530mm Z axis traverse 580mm Spindle nose to table 115-695mm Spindle BT40 Spindle speeds 0-10,000rpm Spindle motor 22.4kW Rapid feed rate 30m/min Toolchanger capacity 30 tools Approximate weight 5800Kg   MACHINE EQUIPPED WITH: - Siemens 828D CNC Control Renishaw probe 15 0ff BT40 toolholders Coolant system Lighting Guarding Bsdpfx Aboxzqq To Djll

Condition: used, x-travel 760 mm Bledpfxsxxb I De Ab Del y-travel 410 mm z-travel 500 mm

Condition: used, The scope of delivery includes: 01x shelf grate, used Material color: hot-dip galvanized Total depth: approx. 2,520 mm (support bar direction) for double shelf rows: 2x 1,100 mm Inner depth: approx. 2,517 mm Total width: approx. 1,120 mm (cross bar direction) Support bar dimensions: 30|1.50 mm Frame height: approx. 30 mm Mesh width: approx. 68 x 45 mm Weight | piece: approx. 30.83 kg Internal designation: GR-114 Bedpfx Aevvhglob Dsll Note: The grate may have damage, scratches, dents, welds. Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: This article is only available for collection. Any additional transport or shipping of this item will incur additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: new, type of input current: AC, travel distance X-axis: 850 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 640 mm, number of slots in tool magazine: 30, controller manufacturer: HEIDENHAIN, overall weight: 6,500 kg, table length: 1,000 mm, table width: 460 mm, controller model: TNC 7, coolant supply: 20 bar, rapid traverse Z-axis: 36,000 m/min, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, rotational speed (max.): 12,000 rpm, spindle nose: SK 40 BIG PLUS, table load: 400 kg, tool diameter: 150 mm, tool length: 300 mm, tool weight: 8 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The LAGUN L 850 machining center in a cross table design stands for high precision, robust construction, and economical production. Ideal for mechanical engineering, mold making, and job manufacturing, as well as for a wide range of demanding machining tasks. Your advantages: ✔ Delivery and commissioning by JMT technicians included ✔ Original spare parts available directly from stock Bledpfxsm Tv Sbo Ab Del ✔ Technical support and on-site service in Germany ✔ Training and instruction of operating personnel included ✔ Financing and leasing options available upon request ✔ 24-month warranty Technical equipment: Control system: ✔ HEIDENHAIN TNC 7 Basic ✔ HEIDENHAIN TFT screen 16" ✔ HEIDENHAIN motors, measuring systems, and electronic handwheel HR 510 Including the following accessories: ✔ Longitudinal hinged band chip conveyor ✔ Preparation for the integration of a rotary table ✔ Full enclosure with side-opening viewing windows ✔ Ergonomic L-shaped control panel Accuracy: Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Contact us – we will be happy to advise you and prepare a customized offer.

Year of construction: 1980, condition: used, turning diameter over bed 655 mm turning diameter over slide rest 390 mm turning length 1250 mm spindle bore 82 mm spindle turning speed range 9-1120 U/min feeds 0,049-3 mm/U total power requirement 12 kW weight of the machine ca. 5,2 t required space 3,5 x 1,9 x 1,7 m m Blsdpfx Aolc Uk Ijb Del

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: A3347169, functionality: fully functional, number of axes: 3, CNC machine SCM, Record 100 AL action line, 3-axis woodworking line, 400V, year of manufacture 16/07/2008, electrical cabinet, control with safety mat, partition wall, working area 305 x 122 cm, total machine dimensions: approx. 565 x 250 x 260 cm, self-dismantling required Bodpfx Ajxg El Ajb Djll 3 axes In perfect working condition 1 large vacuum with details of white panel and 1 small vacuum: Year 2019 / N°A3347169 Type VTLF2.250/0-79 Frequency 50/50Hz Speed 950/1150min-1 Power required 5.5/6.4kW Inlet capacity 244/286m³/h Max vacuum 200/200mbar Video available.

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: 6V0146, MACHINE SPECIFICATION Height of centres 170mm Swing over bed 350mm Swing over cross slide 196mm Swing in gap 535mm Width in front of faceplate 165mm Bed length between centres 650mm Spindle speeds (infinitely variable) 15-3250rpm Spindle nose mounting (Camlock) D1-4 Spindle bore 42mm Spindle motor 7.5kW Bodpfx Aewmm S Tjb Dell Width over bedways 318mm Travel of cross slide 250mm Travel of top slide 100mm Travel of tailstock barrel 145mm Taper in tailstock barrel No. 4 MT Machine in Metric execution   MACHINE EQUIPPED WITH Acu-Rite 2 axis DRO System 3 Jaw chucks Quick change toolpost and 2-off toolholders Chuck guard Saddle mounted chip guard Coolant system Lighting Rear splashguard NB Machine ex display Dyson apprentice training facility, in excellent condition

Year of construction: 1999, condition: used, Colour: Grey Membrane press Orma PM/AIR Year of construction 1999 Serial number 52850199 Dimensions 2300*900mm Max panel size 2200x800mm Max panel thickness 40mm 8 cylinders diameter 100mm Stroke 150mm Pressure 160T Pressure pressure 6 kg/cm² Heating 13kW Bjdpownhicefx Ab Dsll Total power 17.3kW 380V, 35Amp Dimensions: 3900x1800xH2100mm, weight 5900kg - Year: 1999 - Documentation available: No - CE certificate present: No - Serial number: 52850199 - Main motor power [kW]: 17.3 - Max. workpiece length [mm]: 2200 - Max. workpiece width [mm]: 800 - Max. workpiece height [mm]: 40 - Number of cylinders [pcs.]: 8 - Cylinder diameter [mm]: 100 - Total working pressure [Ton]: 160 - Working pressure [kg/cm²]: 6 - Heating boiler present: Yes Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Working width 3450 mm Working height 2000 mm Number of cylinders 5 St. loading dimensions L x W x H 3600 x 1200 x 2720 mm Hess "Multipress" Perforated Plate Press For all sloped, segmental, and round-arch windows and doors. Also for interior work or frame construction. For gluing staircase block joints and much more. Largest working area approx. 3450 x 2000 mm External dimensions approx. 3600 x 1200 x 2720 mm The vertical perforated plate press is constructed of heavy-duty, torsion-free steel. Thanks to its simple, robust, and economical design, it has a long service life. The perforated plate is made of 10 mm sheet steel with a 50 mm hole pattern. The pressure cylinders and abutments are self-locking. 5 plug-in hand hydraulic cylinders on a perforated plate with a built-in pump, 2000 kp pressure relief valve, 140 mm pressure plate width, 80 mm pressure plate depth, 60 mm cylinder stroke Bledowqr R Aspfx Ab Dol 4 fixed individual abutments (Technical specifications according to the manufacturer - no guarantee!)

Condition: excellent (used), Xerox Versant 4100 Including: Fiery EX 4100 1 x OHCF (Optional Handling and Finishing) FIM (Feeder and Inserter Module) C/Z fold unit Bjdsychr Eepfx Ab Dell Booklet maker The machine is in perfect working order!

Condition: used, Year of construction: 2009, functionality: fully functional, Vertical Machining Center Type No: TMV720A Working Area (L × W) 800 mm × 480 mm (31.5" × 18.9") Travels Bsdpfjyuvivsx Ab Doll X Travel: 480 mm (12.2") Y Travel: 530 mm (20.8") Z Travel: MAX 630 mm (24.8") Distance Between Spindle Table Top: MIN 100 mm (3.9") Max Table Load 500 kg (1100 LBS) Table Height 900 mm (35.43") Rapid Traverse (X/Y/Z) 48 / 48 / 48 m/min Servo Motor X: 1.8 kW Y: 1.8 kW Z: 2.5 kW Spindle Spindle Nose: BT No.40 Spindle Speed: 8000 – 10000 RPM Spindle Motor: 5.5 / 7.5 kW Coolant Motor 0.55 kW (0.75 HP) Tool Selection Random Tool Capacity 24 (MAX) Max Tool Diameter 80 mm (3.14") Max Tool Dia × Length 250 mm (9.84") Max Tool Weight 7 kg Tool Holder BT40 Machine Height 2580 mm Net Weight 3800 kg Floor Space (L × W) 2000 mm × 2380 mm Machine Precision Position: 0.01 mm / full travel Dependable Degree: ±0.005 mm

Condition: used, Year of construction: 2004, x-travel 1300 mm y-travel 510 mm z-travel 570 mm max. workpiece weight 1200 kg spindle turning speed range 12000 U/min Bodpfeyyc Svex Ab Djll weight of the machine ca. 7,1 t required space 5,00 x 3,20 x 3,00 m

Condition: used, Year of construction: 2005, Second-hand machine Year of manufacture: 2005 Blodpfx Aszk N Hlsb Dol Features and technical specifications: - Base machine 555 - Machining dimensions for contour milling: - X = 3514 mm - Y = 1544 mm - Maximum machining dimensions: - X = 3868 mm - Y = 1746 mm - Z = 325 mm - Workpiece support with 8 brackets, pneumatically clamped - Drilling unit 7968: - 18 vertical drilling spindles with 32 mm pitch - 12 in the X-axis and 6 in the Y-axis - available individually - T-shaped layout - max. drilling diameter 35 mm (depending on panel thickness) - Spindle extension stroke: 70 mm - Direction of rotation: alternating clockwise and anti-clockwise - n = 4725 rpm, infinitely variable - 2 horizontal drilling units in the X-direction, 1 horizontal drilling unit in the Y-direction - Sawing unit 7946: - Motor: 3.5 kW - 90° pneumatically swivelling - n = 5300 rpm - Tool holder A Ø = 200 mm, I Ø = 30 mm, B = max. 3.5 mm - Sawing/grooving in the X and Y directions - Milling unit 7935: - with 6 kW spindle, water-cooled - Milling unit 7982: - for lock case milling - Tool changer 7996: - 18-position magazine (turret) - Vacuum pump with a capacity of 140 m³/h - Handheld control unit - PC control system with TwinCAM WOP system - Siemens control system Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: - Electrics 3x400V 50 / 60Hz - Gimbal-mounted 5-axis electrospindle 12 kW (S6) HSK F63 - 24,000 rpm - ceramic bearings incl. liquid cooling with infinitely height-adjustable extraction hood - electric-motor controlled - full rated power at approx. 12,000 rpm - speed: 1000 - 24000 rpm - drive: 3-phase HF motor, inverter-controlled - direction of rotation: clockwise/counter-clockwise - 2 controlled compressed-air connections - interface for aggregates - tool weight (rotating): 6 kg - max. saw blade Ø 350 - spindle cooling: liquid cooling - extraction hood infinitely variable - Profit H350 16.30: CNC machining centre in gantry design (without tool) with digital drives (driven on both sides). The machine column of the Profit H350 16.30 is made of thick-walled, electrically welded rectangular tubes. The steel ribbing inside the column achieves high stability. - Machining field H350 16.30: Travel of the axes: X = 4000 mm Y = 1970 mm Z = 455 mm Working field: X = 3000 mm Y = 1500 mm Z = 150 mm clearance height Axis positioning speeds: depend on the selected safety system (these can be found in the layout). - Travelling gantry driven on both sides - Guide system X axis: The travelling gantry of the X axis is driven via a rack with inclined, crowned tooth form - This guarantees highest precision. The reduction gear ensures highest machining quality and repeat accuracy. The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. - Guide system Y axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Y axis is positioned by means of a ground recirculating ball screw. - Guide system Z axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Z axis is positioned by means of a ground recirculating ball screw. - Automatic central lubrication: The grease is delivered in a controlled manner to the guide carriages of the X, Y and Z axes as well as to the recirculating ball screws in Y and Z. The lubrication process is carried out automatically after a specified time. - 12-position linear tool changer on the left of the machine column incl. a pick-up position for aggregates: The 12-position linear changer ensures shortest changeover times and offers sufficient space for milling tools. One aggregate change position (fitting variants see layout) Max. tool diameter 250 mm Max. tool length 240 mm - Drilling head DH 18 6H 1S: Vertical 12 spindles: 7 spindles in the X direction and 5 spindles in the Y direction. Horizontal 6 spindles: 4 spindles in the X direction and 2 spindles in the Y direction. Forward stroke = 70 mm Bljdszlbpbjpfx Ab Dol max. drill length = 70 mm and shank D = 10 mm. All spindles are individually driven and selectable. 1 grooving saw – in the X direction max. saw blade diameter 120 mm max. blade thickness 5 mm max. speed infinitely variable up to 7500 rpm. The drilling group covers the entire working field both horizontally and vertically. - Controlled central extraction connection: Via the program control, either the drilling head or the milling spindle is extracted. This controlled slide gate achieves an optimised extraction performance. Connection diameter see layout - 6 workpiece supports: With front and rear...

Condition: used, Year of construction: 2014, Used Machine Year of Manufacture: 2014 Features and Technical Specifications: - X-axis working range: 3,740 mm - Y-axis working range: 1,570 mm - Z-axis travel: 350 mm - 4th axis: available - 5th axis: 5-axis spindle, 12 kW motor - with additional locking mechanism for the C-axis - Tool change stations: 24 with turret changer; 10 on the left side of the machine column - Vertical drilling spindles: 12 - Machine table: cantilever table - Automatic table positioning: available - 6 e-motion workpiece supports - Special workpiece clamping system for frames Bjdpfx Ajzlbp Usb Dsll - Software: FORMAT 4 WOOD FLASH, TPA ALBATROS - 2 machining areas for alternating setup - With automatic central lubrication - With mobile control console featuring a PC monitor - With air conditioning for the control cabinet - With a 90 m³/h vacuum pump - With handheld control unit - Includes: 12 frame clamps, 8 large and 4 medium suction cups

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 1111254, MACHINE SPECIFICATION Table size 660mm x 356mm X axis traverse 508mm Bledpfx Aboyrrx Uo Djl Y axis traverse 406mm Z axis traverse 508mm Spindle nose to table 102-610mm Spindle BT40 Spindle speeds 0-8100rpm Spindle motor 14.9kW Rapid feed rate 25.4m/min Toolchanger capacity 20 tools Approximate weight 3220Kg MACHINE EQUIPPED WITH: - Haas (Fanuc compatible) CNC Control Swarf auger Filtermist extraction system 10 off assorted BT40 toolholders Programmable coolant nozzle Automatic lubrication system Lighting Enclosed guarding

Condition: used, Year of construction: 2007, RÖDERS RFM 600 with RCE 1 – High-speed machining center – 42,000 RPM – only approx. 1,370 operating hours For sale is a high-quality vertical high-speed machining center, a RÖDERS RFM 600 with RCE 1, manufactured in 2007. (An RFM 600 from 2003 is also available at the same location.) The machine is ideally suited for the highly precise machining of graphite, aluminum, non-ferrous metals, as well as hardened tool steels, and is used primarily in the tool, mold, and precision machinery industries. Technical data: Year of manufacture: 2007 Travel distances X/Y/Z: 600 / 450 / 300 mm Table: 700 x 550 mm RÖDERS CNC control HSK-40 spindle Spindle speed up to 42,000 RPM 20-position tool changer Max. workpiece weight 400 kg Machine weight approx. 6.5 t Equipment: RCE 1 rotary tool changer Smoke extraction Well-maintained overall condition Only approx. 1,370 operating hours Ideal for tool and mold making, electrode manufacturing, graphite machining, precision milling, and HSC/high-speed cutting. The machine can be inspected under power after prior appointment. Location: Germany Bodpfxozk Eu So Ab Djll Subject to prior sale. _____ Subject to prior sale and errors in the technical data. The technical data has been compiled to the best of our knowledge but does not constitute guaranteed characteristics. Our general terms and conditions apply; the seller is not liable for typing or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are in accordance with their age. Used machines are sold exclusively to commercial customers and without warranty.