Used Exhaustion for sale (2,700)

Condition: new, Year of construction: 2025, Al-Ko clean air dust extractor year 2024 Exhibition piece - Immediately available Chjdpfx Afecdy I Rolsf Absolute special price Technical data Power Unit 250 P Intake manifold: 250 mm Rated motor power: 6.5 kW / 3 Ph Voltage: 400 V / 50 Hz Max. volume flow: 4900 m³ / h Nominal volume flow: 3524 m³ / h Negative pressure: 2451 Pa Filter surface: 22.4 m² Sink collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Location: ex stock 54634 Bitburg

Condition: used, Year of construction: 2012, Blower with metal blades Cedpfx Afjxxr Sasljhf Diameter 400mm 22kW motor 1400 tr/min

Condition: good (used), Horiba Type: Mexa 7100D Technical data: The exhaust gas concentration of CO(L) CO(H) CO2 O2 THC CH4 non-Ch4 NO NOx NO2 is measured in detail The system contains the following analyzers: CO/CO2 analyzer AIA-72X Chodpouz Tvyefx Afljf O2 analyzer MPA-720 NO/ NOX analyzer CLA-757 THC analyzer FIA-/26 The calculated and measured values of the MEXA can be output via an analog interface or network. Year of manufacture 2011 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: new, Year of construction: 2025, Clean Air Dust Collector RLA 160 For wood dust and shavings, designed for commercial use Item number: 5131620 Brand: Holzkraft For wood shavings and dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³ High extraction performance with minimal space requirements Maximum performance in this class Very quiet Area of application Clean air extraction systems for wood chips and wood dust Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter Can also be used for multiple dust sources High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, allowing for flexible use Large inspection openings Large, mobile chip containers with clamps and chip collection bags System delivered fully assembled, allowing for quick deployment Mobile Filter description Ultra-compact with maximum filter area Filter material made of polyester fleece Aluminum-coated, washable, and therefore with a long service life. Filter comes standard with an antistatic design, tested and approved according to category M-BIA. Filter resistance monitoring via differential pressure cell, adjustable via a warning light on the control box. The fan is installed downstream of the filter. Equipment details: With a new locking device for secure container positioning. All systems in this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. Scope of delivery: Metal fan impeller. Inspection opening for cleaning the bypass filter. 5 m connection cable with 5-pin CEE plug and phase inverter. 2 fixed and 2 swivel casters with parking brake. Manual cleaning. Model RLA 160 Item no. 5131620 Chjdpfx Afscnw T Ioljf Technical Specifications Intake manifold diameter 160 mm Nominal flow rate 1448 m³/h Max. flow rate 2400 m³/h Valve pressure at Vnenn 2247 Pa Filter area 9.21 m² Filter material dust class M Residual dust content H3 (< 0.1 mg/m³) Filter cleaning Compressed air supply Chip collection volume 2 x 193 l Mains voltage 400 V Mains frequency 50 Hz Motor power 2.2 kW Max. sound pressure level 73 dB(A) Dimensions (length x width x height) 1681 x 830 x 1654 mm Weight 254 kg Location: Ex warehouse 54634 Bitburg

Condition: excellent (used), Type: DST 1000 Description: For sale is a dust test chamber, type DST1000, from Testzentrum Baden GmbH. This unit was developed for conducting IP protection class “dust” tests (DIN EN 60529 / DIN 40050 Part 9). Testing possible with or without vacuum. Operation / Features: - Control panel with display and buttons - Manual regulators for individual settings - Preset test routines for standardized testing Technical Data: - Test chamber volume: approx. 1,000 liters - Internal dimensions (W × D × H): approx. 1,000 × 1,000 × 1,000 mm - Overall dimensions (W × D × H): approx. 1,300 × 1,000 × 2,000 mm - Supply voltage: 400 V / 50 Hz, 3~N/PE - Current consumption: 10 A - Total electric power: max. 2 kW - Exhaust connection: DN100 flange Codsxpfx Uspfx Aflshf Test Performance / Protection Classes: - Dust-protected IP5X - Dust-tight IP6X Weight: approx. 350 kg Condition: used Scope of delivery: (See image) (Specifications are subject to change and errors excepted!) We are happy to answer further questions by phone.

Year of construction: 2022, condition: as good as new (ex-display), AL-KO grinding table AST 1.5 BASIC The AL-KO grinding table AST 1.5 BASIC is the entry-level model for the AL-KO grinding table program. He is certified according to GS-HO-11 and carries the seal of "Holzstaubgeprueft according to BGI 739-1" THEIR advantages accessible from 4 sides Take loads up to 150kg Manual, tool-free height adjustment with scale Contrasting sides for edge grinding Codpfx Afedqzhbolehf Workpiece-friendly beech wood grid (removable) Funnel-shaped air Guide to the dust extraction spout TECHNICAL DATA LOAD 1.5 BASIC Intake 140 / 160 mm Required suction power 1.500 m ³/h Negative pressure at the connection at 22 m/s 1.000Pa in DN140mm 700Pa at DN160mm Working height adjustable from 735-1.015 mm Working surface (BxL) 946 x 1, 500 mm Dimensions (Wxl) 1, 000 x 1 600mm Weight 73 kg

Condition: excellent (used), Heraeus / Thermo Type: WU 6100 Heat-drying oven with recirculating air 500°C Description Heat and drying oven Heraeus WU 6100 up to 500°C Recirculating air oven for thermal testing of high-quality materials. Chodpfx Aowq Rl Eeflof For precise heat treatment processes up to 500°C Offers precise and even temperature distribution as well as exact maintenance of the selected temperature. Technical data: Internal volume: 52 L Temperature range up to 500°C External dimensions (W x H x D): 744 x 552 x 535 mm Internal dimensions (W x H x D): 403 x 380 x 370/339 mm Weight: 53 kg 400 V 50/60 Hz 11.4 A 5.4 kW Equipment: Temperature controller with digital display Over and under temperature protection Throttle for stepless fresh air and exhaust air regulation Timer Speed control for the recirculating fan Stainless steel inserts Condition: used Scope of delivery: (See image) (Changes and errors in the technical data, specifications reserved!) If you have further questions, we are happy to answer them by phone.

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 300 P-BP 30 -50 Intake port : 300 mm nominal motor power : 7,5 kW / 3 Ph Voltage: 400 V / 50 Hz Maximum volume flow : 6000 m³ / h Nominal volume flow : 5.089 m³ / h Negative pressure 2.587 Pa Filter area 30 m² Dimensions (L x W x H) in mm 3.000 x 1.361 x 2.817 Briquetting capacity 30 - 50 kg / h Briquette diameter: 50 mm Chedjh D If Hepfx Afljf Weight: 1570 kg Machine is brand new in our STOCK - IMMEDIATELY AVAILABLE - subject to prior sale Location: 54634 Bitburg

Condition: excellent (used), Pfeiffer DUO 65 two-stage high-performance rotary vane pump Here we offer a Pfeiffer DUO 65 two-stage high-performance rotary vane pump. Pfeiffer DUO 65 two-stage high-performance rotary vane pump Two-stage high-performance rotary vane pump with suction capacity of up to 70 m3/h With 3-phase motor With temperature sensor (3TF) for optimal motor protection Integrated gas ballast and HV safety valve For all applications in the rough and fine vacuum range Duo 65, 3-ph motor, 3TF, 200-230 / 346-400V, 60 Hz Type: PK D46 642 A with ONF 35/65 oil mist separator, corrosive version,  Sits on the pump's exhaust nozzle and prevents air pollution from oil mist. Type: PK Z40 150 Scope of delivery: (See picture) Cjdpsvx Tfxofx Aflshf We are happy to answer any further questions you may have over the phone. Written orders can be placed by email or fax

Condition: excellent (used), Year of construction: 2016, Technical data POWER UNIT 200 P used - Excellent condition - • Inlet diameter: 200 mm • Motor rated power: 2.9 kW; 400 V/50 Hz Chodpsw Tqndofx Aflsf • Max. air flow: 3010 m³/h • Rated air flow: 2262 m³/h • Vacuum: 2174 Pa • Filter surface area: 13.7 m² • Filter cleaning: compressed air cleaning • 2 discharge containers (roll containers): each 241 liters • Dimensions (L x W x H): 2322 x 830 x 2050 mm • Weight: 320 kg • Version: left Location: Ex-stock Bitburg - Immediately available -

Condition: excellent (used), Here we offer you a Bielomatik laser welding system. Bielomatik laser welding system Machine description: The laser unit with integrated cooling for the laser is located in the lower left part of the machine frame. The tools are mounted on a 2-station rotary table, which rotates 180 degrees with each cycle. The work area with the welding station, the tool (on the rotary table) and the hold-down device for the product is located in the middle section of the machine frame. The control cabinet is installed at the rear. The welding station is protected against the insertion/removal area by a laser-tight cover. The welding laser (the laser supply) is switched off when a maintenance door is opened. The welding parts are loaded and removed manually. The welding process runs automatically. Laser type: YLR-300-AC-Y11/IPG The cell was used for laser welding various plastic parts (front frame). For components measuring approx. 460 x 280 mm Basic data Equipment of the machine: 1 complete machine frame with cladding, substructure and protective devices, painted Adjustable machine feet, designed for transportation with forklift. 3 manual maintenance doors in the laser-safe processing area, each secured with guard door switch with guard locking. 4 manual maintenance doors underneath the machine table. The control cabinet is permanently installed at the rear of the machine Laser system Fab. IPG 1 fiber laser 300 Wcw, at the fiber end, 1070 nm completely air-cooled. 1 power supply unit for laser unit, target beam laser and glass fiber 1 Vario-Scan for 3D welding contour 1 scanner - 20 aperture Optics, F-Teta lens, focal length determines processing field and processing distance Chodpfx Aeqay Uvefljf 2x basic tool Tool coding with transponder Hold-down/clamping system for holding a mask with absolute path measuring system With pneumatic clamping system for path-controlled pressing of one welding part at a time Pneumatic air shower to protect the lens body Microbox PC427B incl. RTX (Siemens) Pre-installed Siemens S7 software PLC Profibus, Profinet, Ehternet, RS232 interface 15" touch panel for operating and entering data/parameters Machine lighting Connection flange for on-site fume cupboard Machine data: Dimensions: Machine W x D x H: approx. 2330 x 2350 x 2500mm Control cabinet: Firmly bolted to the machine frame Space requirement BF x DF: 5400 x 5400mm Technical Data: Power supply: Number of phases/rated voltage 3x400V 50Hz Connected load 5KVA Back-up fuse: 16A Exhaust air: Nominal diameter ∅160 Air volume 500-1000 m³/h Weight approx. 2000 kg Type: K3633/023 Condition: second-hand / used (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Year of construction: 2021, Technical data: ALKO clean air mobile extraction unit, Type: Mobil-Power Unit APU 120, Motor power: 1.5 kW, Chjdpow T U Uzsfx Aflef Inlet diameter: Ø=120 mm, Sound insulated, Mobile separation drum: 135 l, Manual filter cleaning, Dimensions: L=1,085 mm, W=650 mm, H=1,985 mm, Dust drum volume: 135 liters, Weight: 117 kg, Nominal airflow (after cleaning): 814 m³/h, Location: ex stock 54634 Bitburg - immediately available -

Year of construction: 2016, condition: excellent (used), Horiba Here we offer a Horiba exhaust system Mexa 7100D. Including JAG-10-000-061 cylinder trolley approx 1200 x 1064 x 802 mm and OVN-724A Stationary exhaust gas measurement before/after exhaust gas aftertreatment, Chsdpegkglxsfx Aflof Evaluation of exhaust gas aftertreatment systems Modal analysis (dynamic or transient analysis) during transient operating processes Analyzer for CO/CO2 (HC, NO, N2o, SO2), O2, THC 200 operating hours Weight 620 Kg Year of manufacture 2016 Type: Mexa 7100D Condition: used / used Pick up from location Scope of delivery: (See picture) (Changes and errors in the technical data, data are reserved!) Further questions we can answer on the phone for you.

Condition: new, Year of construction: 2025, Chip extractor ASA 7703 mobile, with 180° rotatable suction unit For milling, planing and sawing chips (not suitable for dust) 180° rotatable suction unit allows suction from below or above Sturdy metal fan wheel High-quality chassis as standard for better stability and easy manoeuvring Quick release fasteners for filter and chip bag Fine filter bag double woven Dimensions and weights Chip collection volume 2 x 290 l Nominal width outside suction socket inlet 260 mm Nominal width outside suction socket outlet 3 x 120, 1 x 100 mm Length approx. 1900 mm Width/depth approx. 670 mm Height approx. 2800 mm Weight approx. 88 kg Electrical data Idle speed 2950 min¯¹ Input power 4,8 kW Supply voltage 400 V Chedpfx Afshk S Stolef Mains frequency 50 Hz Filter Filter area 2 x 5,98 m² Noise emission Sound pressure level max. 98.3 dB(A) Volume flow Nominal volume flow 7700 m³/h Negative pressure max. 2800 Pa Scope of delivery: Two filter bags, two chip bags. Location: ex stock 54634 Bitburg - available at short notice -

Condition: excellent (used), Here we offer a Mytron drying oven. The drying oven WT 850 is used for simultaneous drying of several products or auxiliary devices in the semiconductor industry. Due to its robust construction (box section frame) and the use of stainless steel material for the heating chamber, the drying oven WT 850 is universally applicable. The trolley enables the WT 850 drying oven to be moved in and thus easily loaded. An exhaust air connection with control flap enables the connection of the oven to a central exhaust system. Technical data: Outer dimensions: Width 1145 mm x height 1880 mm x depth 1810 mm dimensions of the heating chamber: width 850 mm x height 690 mm x depth 1410 mm Volume of the warming chamber: approx. 830 liters mass: ca.230 kg, trolley 50 kg temperature range: 10°C above room temperature to + 120°C spatial temperature constancy: ± 1°C temporal temperature constancy: ± 1°C Mains connection: 3NPE AC 50 Hz 400 V, 16 A CEE plug power consumption: 4,5 kVA fuse protection: 3 x 16 AT, 1x 6 AT Control: digital controller Safety device: adjustable overtemperature protection Feed-through opening: Exhaust air spigot 100 mm with control damper on top Supply air spigot 100 mm with control damper on top Type: WT 850 Condition: used / used Scope of delivery: (see picture) Chedpfeiwyiwsx Afljf (Changes and errors in technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: new, Year of construction: 2025, Raw air extractor ASA 141 Cjdpfxehk S Swe Aflehf With standard undercarriage Dimensions and weights Chip collection volume 175 l Nominal width external suction inlet 140 mm Length approx. 1062 mm Width/depth approx. 648 mm Height approx. 2300 mm Weight approx. 40 kg Electrical data Supply voltage 230 V Mains frequency 50 Hz Filter Filter area 1.9 m² Noise emission Sound pressure level max. 78 dB(A) Volume flow Nominal volume flow 1650 m³/h For milling, planing and sawing chips (no dust) Substantially reduced dust content due to BIA-tested filter material with high separation efficiency Housing parts and impellers made of high-strength special plastic Quick release fasteners for filter and chip bags for unproblematic maintenance Robust, high-quality design Easy to move due to swivel castors Low power consumption Suction units comply with dust class L Scope of delivery: System body with mounted fan unit Filter bag / extraction unit chip bag / extraction unit without suction hose

Condition: excellent (used), Vötsch Type: LTU 60/60 Heraeus Vötsch dryer for coating materials Maximum concentration of flammable substances of 40 % of the lower explosion limit (LEL) Highest temperature of the heating surface above 750 °C Device description: Technical data: Interior (usable space) 0.216 m3 Internal dimensions: Width 600 mm Height 600 mm Depth 600 mm External dimensions: Total width 796 mm Height 1725 mm Depth 850 mm Loading / load capacity Total roller conveyor 55 kg Loading height above installation floor 820 mm Weight (net) kg 275 Minimum exhaust air volume flow 96 m3/h Purge time 5-fold air change 90 sec. Increased recirculation air volume flow 33 m3/h Total vapor space 0.414 m3 Sound pressure level (according to DIN 45635) < 70 dB(A) Switch-off temperature Temperature limiter (TB) fixed setting 300 °C Temperature selector limiter (TWB) adjustable above nominal temperature 20 Temperature safety class (according to EN 60519-2) Temperature limiter (TB) 1 Chodpeun Rr Refx Aflsf Temperature selector limiter (TWB) 2 Nominal temperature 200 °C Electrical data Rated voltage / frequency 400V, 3/(N)PE, AC 50/60 Hz Rated current 12.0 A Nominal power 6.0 kW Connected load 7.0 kW Weight: 275kg Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Year of construction: 2000, Gebr. Esta Dustomat 62 Suction nozzle Ø: 160 mm Main motor: 3 kW Item description: mobile, CE mark, 3 KW, Ø=160 mm, Filter cleaning mobile separation container, Chedpfx Afsvk Drtjljf Nominal volume flow 1,850 m³ / h Location: from stock 54634 Bitburg - immediately available -

Condition: excellent (used), Here we offer you a Heraeus Vöstch dryer for coating materials. Maximum concentration of flammable substances of < 40 % of the lower explosion limit (LEL). Highest temperature of the heating surface above 750 °C Equipment description: Technical data: Interior (usable space) 0.216 m3 Inner dimensions: width 600 mm height 600 mm depth 600 mm External dimensions: Total width 796 mm Height 1725 mm Depth 850 mm Loading / load capacity Roller conveyor total 55 kg Loading height above installation floor 820 mm Weight (net) kg 275 Minimum exhaust air volume flow 96 m3/h Purge time 5-fold air change 90 sec. Recirculation air volume flow increased 33 m3/h Total steam space 0.414 m3 Sound pressure level (according to DIN 45635) < 70 dB(A) Switch-off temperature Temperature limiter (TB) fixed 300 °C Temperature selector limiter (TWB) adjustable above nominal temperature 20 Temperature safety class (according to EN 60519-2) Temperature limiter (TB) 1 Over-temperature limit controller (TWB) 2 Nominal temperature 200 °C Codpehv Ru Ssfx Afljhf Electrical data Rated voltage / frequency 400V, 3/(N)PE, AC 50/60Hz Rated current 12.0 A Rated power 6.0 kW Connected load 7.0 kW Weight: 275kg Type: LTU 60/60 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: new, Year of construction: 2025, Clean Air Dust Extractor: RLA 140 For wood dust and shavings, designed for commercial use Item number: 5131400 Brand: Holzkraft DESCRIPTION Dust-tested according to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic shavings High extraction performance with minimal space requirements Maximum performance in this class Very quiet All models with collision protection Area of application Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, allowing for flexible use Large inspection openings Large, mobile chip container with clamp and chip collection bag Dust extractor already installed upon delivery Fully assembled, allowing for quick deployment. All models are mobile. Model RLA 210: Optimal chip distribution into the chip containers due to the large filter surface. Filter Description Ultra-compact with maximum filter surface. Filter material made of aluminum-coated polyester fleece, thus offering a long service life. Filter tested and approved as standard in antistatic design according to category M-BIA. The fan is installed downstream of the filter. TECHNICAL DATA Dimensions and Weights Length (product) approx. 1241 mm Width/Depth (product) approx. 830 mm Height (product) approx. 1750 mm Net weight approx. 210 kg Chip collection volume 165 l Nominal diameter of the extraction nozzle inlet: 140 mm Axis of the extraction nozzle to the floor: 850 mm Electrical Data Supply voltage: 400 V Mains frequency: 50 Hz Efficiency class of the extraction motor IE3 Drive motor power: 2.2 kW Chsdpfxjv Sk Tms Afljf Filter Filter area: 8.5 m² Residual dust content: < 0.1 mg/m³ Manual filter cleaning Noise emission Max. sound pressure level: 71 dB(A) Flow rate Nominal flow rate: 1108 m³/h Max. flow rate: 1750 m³/h SCOPE OF DELIVERY Metal fan impeller Inspection opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter Two fixed and two swivel casters with parking brake Manual cleaning

Condition: used, mytron Type: T2240 Temperature cabinet, water-cooled Technical data: External dimensions: width 1435 mm, height 1955 mm, depth 2590 mm Dimensions of the test chamber: width 1050 mm, height 1400 mm, depth 1600 mm Volume of the test chamber: approx. 2240 l Opening for cables: 2 x 100 mm right 2 x 100 mm left Temperature range: – 40 °C to + 100 °C at 23 °C room temperature Temperature stability over time: +/- 0.5 °K Temperature stability over space: +/- 1.0 °K Cooling: water cooling, Inlet and outlet 1" internal thread Chodpfx Afevtl Hqelef Cooling water shut off by solenoid valve when device is OFF Fault display in the event of a refrigeration machine error Cooling water consumption: Inlet temperature approx. 15 °C, approx. 15 l/min, Drain temperature approx. 22 °C (with continuous cooling approx. 27 °C) Mains connection: 3NPE AC 50 Hz 400 V, 32 A CEE plug Power consumption: approx. 6.5 kVA Fuse protection: 3 x 20.0 AT, 3 x 10.0 AT Lighting: 25 watts each on the left and right side of the test room Exhaust air connection: DN 100 mm plug-in system Safety device: electronic overtemperature protection, permanently set Flue gas monitoring with horn Viewing window: five-pane glazing 130 x 360 mm Refrigerant: R 404 A approx. 10 kg Weight: approx. 850 kg Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 250 P-BP Intake port : 250 mm nominal motor power : 6,5 kW / 3 Ph Voltage: 400 V / 50 Hz Maximum volume flow : 4.900 m³ / h Nominal volume flow : 3.534 m³ / h Negative pressure 2.451 Pa Filter area 22,4 m² Dimensions (L x W x H) in mm 2.305 x 1.333 x 2.609 Briquetting capacity 30 - 50 kg / h Location: Comes to stock 54634 Bitburg Codpfxecdr E As Aflshf Subject to prior sale

Condition: as good as new (ex-display), Year of construction: 2025, Technical data POWER UNIT 200 P - Intake nozzle Ø: 200 mm - nominal motor power: 2,9 kW; 400 V/50 Hz - max. volume flow: 3010 m³/h - nominal volume flow: 2262 m³/h - negative pressure: 2174 Pa - filter surface: 13,7 m² - filter cleaning: Compressed air cleaning - 2 pcs. filling container (roll container): a. 241 litres - Dimensions ( L x W x H ): 2322 x 830 x 2050 - weight: 320 kg - Execution / operating side alternatively right / left Chedpfobpg Ncex Afljf Location ex stock Bitburg Top price for the exhibition piece

Condition: new, Year of construction: 2024, Description High quality galvanized steel housing Powerful, economical engines Chodpfefc A Urox Aflof Standard optional intake connection at top or bottom Uniform filter bags for all variants Discharge in chip tons The modular models of the AL-KO AAS series are available in optimally matched performance categories with energy-saving and quiet motors that drive the fan on the raw air side and thus generate particularly effective overpressure filtering. Durable quality components and an all-metal housing made of galvanized sheet steel give you investment security as well as the many retrofit options. The particularly favourable price and short installation times also contribute to the fact that the AL-KO AAS is definitely the right choice. Technical data AL-KO AAS 3013 Suction port 200 mm Nominal capacity 2.500m³/h Maximum volume flow 3.300m³/h Maximum negative pressure 2,700 Pa Filter area 3 x 2.2 m² Chip collection volume 3 x 175 litres Engine power 3.0 kW / 400 V Dimensions (LxWxH). 2486 x 578 x 2115 mm Weight: 139 kg

Condition: new, Year of construction: 2025, RLA 160 Holzkraft Clean Air Dust Extractor For wood dust and shavings, designed for commercial use Item number: 5131620 Brand: Holzkraft Swarf collection volume: 2 x 165 l Nominal diameter of the suction nozzle inlet: 160 mm Length: approx. 1755 mm Width/Depth: approx. 830 mm Csdehkzttopfx Aflohf Height: approx. 1654 mm Weight: approx. 260 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 9.21 m² Noise emission Sound pressure level: max. 73 dB(A) Voltage: Nominal flow rate: 1448 m³/h Dust class: H3 Included: Metal fan impeller Inspection opening for cleaning the bypass filter 5 m connection cable with CEE plug 5-pole and phase inverter Two fixed and two swivel casters with parking brake Manual cleaning Item No. 5131620 Location: From stock, 54634 Bitburg - Available immediately -