Used External Staircase for sale (5,219)

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, machine/vehicle number: 8151, rotary table diameter: 800 mm, grinding height: 750 mm, workpiece weight (max.): 800 kg, total height: 4,100 mm, total width: 26,650 mm, total length: 44,000 mm, feed length Y-axis: 750 mm, feed length Z-axis: 550 mm, overall weight: 13,000 kg, grinding wheel diameter: 400 mm, disc diameter: 400 mm, grinding spindle speed: 1,460 rpm, grinding diameter: 800 mm, control cabinet width: 650 mm, type of input current: DC, control cabinet height: 1,900 mm, control cabinet length: 1,800 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 1,460 rpm, table load: 900 kg, workpiece diameter (max.): 850 mm, grinding wheel width: 60 mm, table width: 1,240 mm, power: 35 kW (47.59 HP), rapid traverse X-axis: 2 m/min, rapid traverse Y-axis: 100 m/min, rapid traverse Z-axis: 2 m/min, space requirement height: 4,100 mm, space requirement length: 5,100 mm, space requirement width: 2,655 mm, Good day, For sale is a well-preserved and completely functional Sielemann cylindrical grinding machine for the following applications: surface grinding, internal grinding and external grinding. The machine has a swivel stand with 3 different sanding heads for the respective area of application. Complete machine documentation is available and can be presented upon inspection. The Sielemann offered here has always been serviced and maintained, most recently the components listed below were replaced: - 3x New weight compensation cylinders - 1x new hydraulic unit (complete) - New guideway covers - Revised rotary table group Nodpferntirex Abvskw Technical data Machine length: 4.400mm Machine width: 2,655mm Machine height: 4.100mm Machine weight: 13.000Kg Control cabinet width: 650mm Control cabinet height: 1.900mm Control cabinet length: 1.800mm Grinding table diameter: 800mm Grinding table load capacity: 800kg Grinding table drive power: 0.21 - 14.5KW Grinding table speed: 100 1/min (both directions) Grinding table workpiece clamping: Magnetic clamping plate incl. T-slots Z-axis travel (grinding table): 550mm Maximum grinding height (Y): 750mm Lubrication pump Masch. Bed: 0,18KW Lubrication pump Masch. Column: 0,1KW Leak oil pump: 0,065KW Hydraulic pump: 1.5KW 1) External round grinding head Spindle drive power: 11KW Spindle speed: 1,450 1/min Grinding wheel: 400x50mm Cone grinding spindle mount: D=65mm Taper pitch: 1:5 Feed speed (Y): 100 mm/min 2) Internal round grinding head Spindle drive power: 5.5KW Grinding wheel: Variable Feed speed (Y): 100 mm/min 3) Flat-round sanding head Spindle drive power: 11KW Spindle speed: 1,800 1/min Grinding wheel: 400x50mm Cone grinding spindle mount: D=65mm Taper pitch: 1:5 Feed speed (Y): 100 mm/min Viewing appointments possible at short notice by arrangement !!! With kind regards R.Suckow / Managing Director UNITTOOL Werkzeugmaschinen GmbH 33758 Schloß Holte Stukenbrock Görlitzerstraße 9

Condition: excellent (used), Thermo Scientific Thermo Scientific Forced-Air Drying Oven UT 6200 F with external temperature control unit Single STW150 Temperature Control System 85°C Thermo Scientific Forced-Air Drying Oven UT 6200 F with external temperature control unit Complete laboratory temperature control and drying system Description – Function & Application For sale is a professional temperature control and drying system comprising: - Thermo Scientific / Heraeus Forced-Air Drying Oven UT 6200 F - Single Water Temperature Control Unit STW 150/1-3-10-K5 The forced-air drying oven ensures uniform temperature distribution inside the chamber and is ideal for drying, heating, and temperature-controlling samples, components, or materials. Heating is provided via the external water temperature control unit (external heater), resulting in highly stable, indirect, and gentle temperature management—without local overheating and with homogeneous heat distribution. Typical areas of use: - Laboratory & research - Industry & production - Materials testing / component drying - Tempering, heating, drying at constant temperatures Robust laboratory and industrial quality—reliable and durable. Device 1 – Forced-Air Drying Oven: Manufacturer: Thermo Scientific / Heraeus Model: UT 6200 F Technical Data: - Max. temperature: 85°C - Operating voltage: 230 V - Frequency: 50 / 60 Hz - Power consumption: 0.6 A - Power: 0.14 kW - Protection class: IP20 Dimensions & Weight (approx.): - External dimensions: 895 × 816 × 715 mm - Inner chamber: 554 × 644 × 503 mm - Volume: approx. 180 liters - Weight: approx. 100 kg Device 2 – Water Temperature Control Unit: Manufacturer: Single Temperiertechnik GmbH Model: STW 150/1-3-10-K5 Nksdpeymn Egsfx Abvsw Technical Data: - Heat transfer medium: water - Connection: 400 V / 3~ / PE / 50 Hz - Power consumption: 6.9 A - Heating capacity: 9 kW - Apparent power: 4.7 kVA - Max. temperature: 150°C Dimensions & Weight (approx.): - Dimensions: 30 × 75 × 60 cm - Weight: 55 kg Total: - Complete temperature control and drying system - Joint operation possible (external heating / external heater) - Total weight: approx. 155 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see picture) (Specifications are subject to change and error!) For further questions, we are happy to assist you by phone.

Condition: good (used), Operator platform / industrial staircase from production line Design: mobile operator platform / industrial staircase Material: aluminium Steps: 4 steps with tread plate Surface: non-slip tread plate steps Construction: welded aluminium frame Mobility: movable with castors Application: access to machines and production facilities Origin: from injection moulding production plant Condition: used Further information available on request. Nedpsytqzqefx Abvokw Location: Freiburg

Condition: used, 1 external cylindrical grinding machine CRESTA 508 as per photos and inspection, on pallet Color: green Condition: used Storage location: production hall / left Payment method: advance payment by bank transfer Shipping: Collection only – shipping is not offered for this item! Njdpfx Ajyr H Uwebvokw

Condition: ready for operation (used), A conventional Schaudt external cylindrical grinding machine is available. Center distance: 1000mm, center height: 180mm, max. grinding diameter: 350mm, max. grinding length: 1000mm, plunge grinding length: 100mm, swivel range: 45°, machine dimensions X/Y/Z: approx. 3200mm/1700mm/1700mm, weight: approx. 4500kg. An on-site inspection is possible. Njdpfx Absyvixzsvjkw

Condition: excellent (used), Year of construction: 1983, Model: Fortuna F23 S1000 ASW 45 Manufacturer: Fortuna-Werke Maschinenfabrik GmbH Origin: Stuttgart-Bad Cannstatt, Germany Year of Manufacture: 1983 Machine Type: Universal external cylindrical grinding machine Control Type: Not CNC – semi-automatic with digital position indicators Workholding: Grinding between centers with headstock and tailstock Max. Grinding Length: 1000 mm Main Motor Power: 26 kW Voltage: 380 V Frequency: 50 Hz Connected Load: 50 A Machine Weight: Approx. 4900 kg Grinding Wheel & Spindle: Wheel Diameter Options: 400 mm, 450 mm, 500 mm, 600 mm, 750 mm, 900 mm Wheel Bore Diameter: 127 mm / 203 mm / 305 mm Spindle Speeds (depending on wheel size): From 930 rpm to 1870 rpm Surface Speed Compatibility: 35 m/s and 45 m/s Spindle Design: Combined axial-radial bearing system for high rigidity Oscillating Grinding Support: Yes – for improved surface finish and cooling Grinding Functions: External cylindrical grinding only (not centerless) Longitudinal feed (table movement) Plunge feed (cross movement) Oscillation grinding (with adjustable stroke) Nkjdpfx Absw Avhpevsw Digital input system (non-CNC but programmable logic based) Manual fine adjustment via micrometer and scale plate Notes: Machine is designed for roughing and finishing of steel, cast iron, and aluminum Built-in charts and formulas provided in the manual for infeed rates, stock removal, overspark passes, and optimal feed per material Extremely rigid German construction, ideal for toolrooms or production environments seeking repeatable precision without CNC control Equipped with electronic displays and control panel (not G-code programmable) Power panel and internal logic controlled through Fortuna's relay/PLC interface

Condition: excellent (used), Thermo Scientific Nksdpfx Aboykab Ievew Thermo Scientific Forced-Air Drying Oven UT 6200 F with external temperature control unit Single STW150 Temperature Control System 85°C Thermo Scientific Forced-Air Drying Oven UT 6200 F with external temperature control unit Complete laboratory temperature control and drying system Description – Function & Application For sale is a professional temperature control and drying system comprising: - Thermo Scientific / Heraeus Forced-Air Drying Oven UT 6200 F - Single Water Temperature Control Unit STW 150/1-3-10-K5 The forced-air drying oven ensures uniform temperature distribution inside the chamber and is ideal for drying, heating, and temperature-controlling samples, components, or materials. Heating is provided via the external water temperature control unit (external heater), resulting in highly stable, indirect, and gentle temperature management—without local overheating and with homogeneous heat distribution. Typical areas of use: - Laboratory & research - Industry & production - Materials testing / component drying - Tempering, heating, drying at constant temperatures Robust laboratory and industrial quality—reliable and durable. Device 1 – Forced-Air Drying Oven: Manufacturer: Thermo Scientific / Heraeus Model: UT 6200 F Technical Data: - Max. temperature: 85°C - Operating voltage: 230 V - Frequency: 50 / 60 Hz - Power consumption: 0.6 A - Power: 0.14 kW - Protection class: IP20 Dimensions & Weight (approx.): - External dimensions: 895 × 816 × 715 mm - Inner chamber: 554 × 644 × 503 mm - Volume: approx. 180 liters - Weight: approx. 100 kg Device 2 – Water Temperature Control Unit: Manufacturer: Single Temperiertechnik GmbH Model: STW 150/1-3-10-K5 Technical Data: - Heat transfer medium: water - Connection: 400 V / 3~ / PE / 50 Hz - Power consumption: 6.9 A - Heating capacity: 9 kW - Apparent power: 4.7 kVA - Max. temperature: 150°C Dimensions & Weight (approx.): - Dimensions: 30 × 75 × 60 cm - Weight: 55 kg Total: - Complete temperature control and drying system - Joint operation possible (external heating / external heater) - Total weight: approx. 155 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see picture) (Specifications are subject to change and error!) For further questions, we are happy to assist you by phone.

Condition: used, Drive motor, DC servo motor LENZE type GFQUBT 112-22 Spindle motor, electric motor Serial no. Nkedpjqv I S Ssfx Abvjw 0239398K Year of construction: 1993 Rated power: 6 kW Operating voltage: 400 DC Rated current: 18 amps Maximum speed: 1000 rpm Excitation voltage: 210 VDC Excitation current: 3.4 amps Shaft diameter: 38 mm (shaft with 10 mm feather key) Shaft length: approx. 76 mm (shaft projection from centering edge) Centering flange diameter: 230 mm Bolt circle diameter: 264 mm, 4x 14 mm holes Longlife speedometer HÜBNER type TDP 0.2 LT-4 Speedometer voltage: 60V / 1000 rpm Speed max. 9000 rpm External fan LENZE type GSD 160 Mains connection: 400 V, 50 Hz. 0.32 kW Overall length: 830 mm (without shaft and centering flange) Overall dimensions L x W x H: 920 x 300 x 460 mm Own weight: 130 kg good condition

Condition: used, Universal Temperature Control Unit WEINREICH Type WTD 4 Temperature control unit with electric heating and connections for external cooling Serial No.: 11932217 Year of manufacture: 1993 Maximum temperature: 140°C Maximum operating overpressure: 6 bar Pump capacity: 30 l/min Tank volume: 4 liters Heating capacity: 4 kW Cooling capacity (heat exchanger): 15 kW Pump motor power: 0.37 kW Circulating water supply + return: G 3/8" Cooling water supply + return: G 3/8" Total power consumption: 4.4 kW Power supply: 380 Volt, 50 Hz, CEE plug - Tempering medium: water - Temperature control with actual and setpoint display STÖRK-TRONIC Type ST 96-35.02K Nksdpfx Absg Rhx Ujvow - Water circulation pump: SPECK - An external cooling unit is required for cooling (the cooled water is supplied to the temperature control unit) - Mobile on 4 castors Dimensions (L x W x H): 620 x 260 x 670 mm Weight: 55 kg In good condition

Condition: like new (used), Year of construction: 2023, operating hours: 200 h, functionality: fully functional, center height: 175 mm, center width: 650 mm, The machine was accepted by Studer and has never been put into operation. Nedpfxoyttcqo Abvskw

Condition: new, Year of construction: 2018, Thyssenkrupp Velino xtra Escalator Escalator Description Manufacturer: Thyssenkrupp Model: Velino xtra FT 923 Type: 5 EK 30 Year of Construction: 2018 General: Travel height: 4.129 m Step width: 1.000 m Step length: 0.203 m Handrail length: 2 x 24.967 m Nominal speed: 0.5 m/s Incline angle: 30°C Number of steps that can be used simultaneously: 24 Total number of steps: 58 Safety features: Start-up switch, up/down, top, bottom Emergency stop switch, top + bottom Handrail retraction switch, right + left, top + bottom Chain tension monitoring switch, right + left Speed monitoring Phase control device Control cut-out switch, top + Below Thermal motor protection switch Brake function monitoring Handrail speed monitoring Fault step monitoring Cover plate switch Drive: Single drive with duplex chain reduction Motor make: emod Motor type: 5CNR112L/4-20 Motor power: 7.5 kW Rated speed: 1500 rpm Connection voltage: 230/400 V Gearbox type: auma FTS 125 worm gear Covering: Interior: Glass balustrade Exterior: Galvanized sheet steel The escalator was manufactured in 2018 and has never been used. Item location: Bottrop Availability: 4 units Disassembly and removal by buyer. Disassembly by us is also possible for an additional charge. Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our shop! International shipping costs on request! Nsdpfx Asw Hcvuebvekw

Condition: ready for operation (used), functionality: fully functional, usable tank capacity: 50,000 l, TECHNICAL DETAILS Number of silos: 2 Gross volume: 50 m³ Diameter: 3,500 mm Cylinder height: 5,000 mm Nkjdpfx Absymxynjvjw Outlet diameter: 200 mm Roof shape: Conical 15° Bottom: Conical shape, apex angle: 60° EQUIPMENT Lifting eyes Lockable manhole, 600 mm diameter with protective grid Support for over-/underpressure protection DN80 PN10 connection for filling line Connection with blind flange Connection for overflow Connection for level switch

Condition: good (used), The scope of delivery includes: Nodpfjvnr Rrex Abvekw 01x steel staircase Material color: yellow Floor height: approx. 2,000 mm Projection: approx. 2,550 mm Total width: approx. 1,225 mm Chest profile: 180 x 8 mm Railing: both sides, galvanized Handrail and knee rail round tube Steps: tear plate, galvanized Step dimensions: 1,210 x 270 mm Number of steps: 10 steps Step height: approx. 175 mm Total length of the staircase: approx. 3,700 mm End stop: L-profile: 65 x 110 mm The end stop of the steel staircase is attached with 2 screws per side Drill hole diameter: approx. 16 mm Note: The steel staircases were partially assembled and partially unassembled. The pictures are intended to illustrate the material. The steel stairs are commissioned unassembled. This is a used item, it may have scratches, dents and signs of use. Your contact person in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the item: This item is only available for collection. Any additional transport or shipping of this item is associated with additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: good (used), Scope of delivery includes: 01x Steel staircase Material color: yellow Floor height: approx. 1,890 mm Projection: approx. 2,650 mm Total width: approx. 1,208 mm Stringer profile: 200 x 5 mm Railings: on both sides Handrail and knee rail: rectangular tubing Steps: smooth Step dimensions: 1,108 x 250 mm Number of steps: 11 steps Riser height: approx. 180 mm Nsdpfxsvntb So Abvjkw Overall stair length: approx. 3,320 mm End stop: L-profile: 100 x 55 mm Note: The steel staircases are partially assembled and partially unassembled. The images are for material illustration purposes only. The steel staircases are picked and shipped unassembled. This is a used item; scratches, dents, and signs of use may be present. Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping is required, this is subject to additional costs which can be requested from us depending on the delivery location and scope of delivery.

Condition: good (used), The scope of delivery includes: 01x steel staircase Material color: yellow Floor height: approx. 1,9450 mm Projection: approx. 2,645 mm Total width: approx. 1,220 mm Chest profile: 180 x 8 mm Railing: both sides, galvanized Handrail and knee rail round tube Steps: tear plate, galvanized Step dimensions: 1,204 x 270 mm Number of steps: 10 steps Step height: approx. 190 mm Total length of the stairs: approx. 3,320 mm End stop: L-profile: 85 x 85 mm The end stop of the steel stairs is attached with 2 screws per side Nkedpfx Aovntmnjbvew Drill hole diameter: approx. 16 mm Note: The steel stairs were partially assembled and partially unassembled. The pictures are intended to illustrate the material. The steel stairs are commissioned unassembled. This is a used item, it may have scratches, dents and signs of use. Your contact person in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the item: This item is only available for collection. Any additional transport or shipping of this item is associated with additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: good (used), Year of construction: 1990, Thread cutting machines with accessories Manufacturer SONE Type: 2000 . Nkodpfx Abjvk D Rpjvsw 230V .

Year of construction: 2003, condition: used, Additional title: brew vessel from stainless steel Total volume: 260 hl Diameter approx.: 3 m Nedpfxjvcqz Ej Abvekw Diameter incl. insulation approx.: 3 m Frame height: approx.: 2 m Width: 3,4 m Material: stainless steel 1.4301 Base construction: on stainless steel pipe supports, ground pegged Features: external boiler, conical hood stainless steel, D = 3200 mm), conical insulating hood (stainless steel outside diameter = 3400 mm), 2 outlets DN200 und DN100, manhole DN600, outlet vent (12000 mm), interior lighting

Year of construction: 2005, condition: ready for operation (used), - USED - CNC EXTERNAL GRINDING MACHINE Nkedpfjyvlxdex Abvew CENTRE HEIGHT: 171 mm DISTANCE BETWEEN CENTRES: 430 mm MAX GRINDING LENGTH: 400 mm MAX ADMITTED LOAD: 150 Kg X-AXIS TRAVEL: 170 mm Z-AXIS TRAVEL: 600 mm RAPID FEEDS: 12 m/min SPINDLE: 830 rpm; 24 Nm GRINDING WHEEL SIZE: 508 x 80 x 203,2 mm MOTOR POWER: 7,5 kW CONTROL UNIT: FAGOR 8055 TCO WEIGHT: 4500 Kg ACCESSORIES: PAPER FILTER ; FUME EXHAUSTER ; MAGNETIC FILTER ; GRINDING WHEEL BALANCER NOTE: 0-9° SWIVELLING TABLE; SWIVELLING CHUCK; INVERTER FOR KEEPING THE PERIPHERAL EXTERNAL GRINDING WHEEL SPEED STEADY; PIECE LOCKING DEVICE WITH PNEUMATIC SYSTEM; HYDRAULIC OPENING TAILSTOCK AND DEVICE FOR SEARCHING THE CYLINDRICITY

Year of construction: 1970, condition: ready for operation (used), A total of three cylindrical grinding machines and one internal cylindrical grinding machine are available. 1/2) Two identical cylindrical grinding machines SMW AGL 125/5PC, year of manufacture: approx. 1970, center height: 160mm, max. workpiece width: 63mm, max. workpiece diameter: 180mm, speed: 1000rpm, machine dimensions X/Y/Z: approx. 2800mm/2800mm/2400mm, weight: approx. 5500kg. 3) Cylindrical grinding machine Fortuna RSE300/II, max. grinding wheel diameter: 300mm, grinding length: 600mm, machine dimensions X/Y/Z: approx. 1600mm/1400mm/1550mm, weight: approx. 2000kg. 4) Internal cylindrical grinding machine Jung D14 MP7z, grindable bore: 8mm-10mm, max. grinding depth: 150mm, swing diameter: 450mm, workpiece spindle bore: 35mm, max. swiveling range: 30°, machine dimensions X/Y/Z: approx. 2700mm/1300mm/1700mm, weight: approx. 2500kg. An on-site inspection is possible. Individual sale possible. Njdjympcyepfx Abvekw

Condition: used, External circulating bath, circulating thermostat, temperature bath, water bath, circulating bath BROOKFIELD Type TC-102D Serial No. D07200476 Temperature range: +5 °C to +150 °C Njdpfxsxcbnxs Abvekw Temperature stability: ±0.05 °C Temperature uniformity

Year of construction: 2003, condition: ready for operation (used), functionality: fully functional, 3 x Eichholz Aluminum Silos, each 118 m³ – Good Condition – Years of Manufacture 2003 & 2005 For sale are three industrial silos by the renowned manufacturer Eichholz Silo- und Anlagenbau GmbH, featuring high-quality aluminum construction. The silos are well-maintained, in technically flawless condition, and are perfectly suited for storage of granulate materials. Technical Specifications (per silo): • Manufacturer: Eichholz Silo- und Anlagenbau GmbH • Capacity: approx. 118 m³ (gross) • Diameter: 3,500 mm • Silo height: 15,000 mm • Material: AlMg3 (aluminum) • Empty weight: approx. 2,900 kg • Max. operating temperature: 50 °C • Max. overpressure: +45 mbar • Max. negative pressure: –5 mbar • Max. permitted bulk density: 7.0 kN/cbm • Bulk material: PS granulate Years of Manufacture & Designations: • Silo S1 – Year: 2003 • Silo S2 – Year: 2003 • Silo S3 – Year: 2005 Special Features: • Robust and durable aluminum construction • Very well-maintained and preserved condition Nkodpfx Ajykt N Eebvsw • Ideal for plastic and granulate material storage Inspection possible at any time by appointment. Sale only as a complete package. If interested, we look forward to your inquiry.

Condition: excellent (used), Aluminium platform ladder with three-sided platform guardrail, featuring knee and toe board. Platform depth: 800 mm Platform width: 600 mm Tread depth: 80 mm Frame material: aluminium Mobile, wheel diameter: 100 mm Wheel equipment: 2 fixed castors Platform height: 1660 mm Including platform: 7 steps Overall construction height: 166 cm platform + 110 cm guardrail Nksdjyctvcopfx Abvow Weight: 40 kg Width: 1510 mm Depth: 1510 mm Accessories: 2 handrails Shipping: disassembled, possible. Assembly instructions included.

Condition: used, This listing is for the Mitutoyo IP65 External Micrometer The unit is in full working condition and is ready for immediate release Imperial or Metric reading Nkjdpfx Absxv A Ruovsw Large LCD display Protected to IP65 for use where coolant may be present Original setting and Auto power off Accuracy +/1μm, Flatness 0.3μm, Parallelism 1μm The Mitutoyo external micrometre has a measurement range of 0mm to 25mm with an accuracy ±1μm. This is high tech, robust, battery-operated device. The Digimatic micrometre offers outstanding accuracy with and without data output. It consists of an oil-resistant material used for all plastic parts. The excellent resistance against water and dust enables this micrometre to be used in machining situations that include splashing coolant fluid.

Condition: used, This listing is for a CAB ER6 External Rewinder. The unit is in full working condition and is ready for immediate release. The CAB ER6/300 External Rewinder is a versatile and efficient label rewinding solution designed to work seamlessly with the Squix 6.3 label printer and other 6-inch label printers. Featuring a built-in power supply, it operates independently without requiring power from the printer, making it a universal and flexible option for industrial labeling applications. Key Features: 🔹 Compatible with Squix 6.3 and Other 6-Inch Label Printers – Ensures seamless integration and efficient operation. 🔹 Wide Material Support – Handles labels up to 180mm wide, accommodating various printing needs. 🔹 Large Roll Capacity – Supports label rolls with a maximum outer diameter (OD) of 300mm. 🔹 Dual Winding Modes – Allows labels to be wound inside or outside for greater flexibility. 🔹 Independent Operation – Built-in power supply eliminates dependency on the label printer. 🔹 Adjustable Core Size – Compatible with 44mm and 76mm cores for diverse applications. 🔹 High-Speed Rewinding – Maximum speed of 300 mm/s ensures fast and efficient label handling. Specifications: Compatible Printers: Squix 6.3 and other 6-inch label printers Material Width: Up to 180 mm Maximum Roll Diameter: 300 mm Winding Options: Inside or Outside Core Sizes: 44mm or 76mm Rewind Speed: Up to 300 mm/s Power Supply: Built-in (independent from printer) Dimensions: 350 x 340 x 390 mm Weight: 6.3 kg Benefits: Universal Compatibility – Works with various 6-inch label printers, ensuring broad usability. Enhanced Efficiency – High-speed rewinding improves workflow and productivity. Independent Power Supply – Eliminates extra load on the printer, reducing wear and tear. Flexible Winding Options – Supports both inside and outside winding, offering customized label handling. Nkedpfx Abjxxya Sevjw Large Roll Capacity – Handles big label rolls, minimizing downtime due to frequent roll changes. Applications: 🔹 Industrial Labeling – Ensures efficient label rewinding for high-volume printing. 🔹 Warehouse & Logistics – Helps streamline labeling processes for inventory tracking. 🔹 Manufacturing – Optimizes label handling for product identification and compliance. 🔹 Retail & Distribution – Improves efficiency in product labeling and packaging.

Condition: used, Electric motor, three-phase motor -Power: 2.2 kW -Speed: 1420 rpm Nkodefff Nrepfx Abvew -Shaft: Ø 28 x 60 mm -Design: B5 -Protection class: IP55 -with: fan -Dimensions: 585/250/H260mm -Weight: 29 kg