Used Internal Gauge for sale (11,114)

Condition: ready for operation (used), broach with movable supporting steady-rest stroke: 1230 mm Hnodpoxpgkxjfx Ag Nju Type H-10-48 Max draw strenght: 10 ton

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, This machine is to carry out an alignment layer treatment of LCD glass substrate by a rotating roller. The roller and stage are flexible to change the setting of angle depending on the coditions used. Hnsdewli Eyjpfx Ag Neu

Condition: used, Used Zetterstrom 912 litre capacity 316L stainless steel vertical reactor. Unit has welded dished top and bottom heads. Internal rated 6 bar design pressure at -35 to 180 deg.c. External stainless steel jacket rated 6 bar/full vacuum design pressure at 180 deg.c. Unit has top entry 3-tier stainless steel agitator direct diven by 3kW 220/380 volt 3/50 1440 rpm motor via Lightnin model LS400 gearbox. Also includes (3) baffles. Unit is mounted on side supports. Specifications: Hsdpew T N Uvjfx Ag Nonu Capacity: 241 gal Material of construction: Stainless Steel Type Of Heads: Welded Dished Top and Bottom Internal Pressure: 6 PSI Jacket Pressure: 87 PSI Internal Temperature: 180°F Type of stainless: 316L Legs/Lugs: Side Supports

Condition: good (used), operating hours: 2,200 h, load capacity: 1,200 kg, lifting height: 1,800 mm, fuel type: electric, mast type: duplex, construction height: 2,100 mm, mileage: 2,200 km, The WIDE GAUGE stacker of this brand is from 2006 and is in good condition; Capacity 1,200 kg; Lifts up to a height of 1,800 mm; Clearance height is 2,100 mm; Only 2,200 hours on the counter; Equipped with stainless steel forks! Outside fork width 88cm, inside fork width 69cm; Gel battery is maintenance-free and comes with an external charger. Watch the video on YouTube. Hnsdpfjw Nk Szex Ag Neu

Condition: used, Year of construction: 2007, operating hours: 32,000 h, machine/vehicle number: IntNr231374, STAR SA 16R CNC sliding head lathe, year of manufacture 2007 CNC control: FANUC 18i-T Operating hours: 32,000 Technical specifications: - Number of axes: 5 - Number of spindles: 2 Hnjdpfsxnil Njx Ag Nou MAIN SPINDLE - Maximum bar diameter: 16 mm - Z-axis travel: 140 mm - Spindle speed: 8,000 rpm - Spindle drive power: 2.2 kW - Number of tool stations: 13 SUB SPINDLE - Maximum bar diameter: 12 mm - Spindle speed: 8,000 rpm - Number of tool stations: 4 FMB Minimag bar feeder The machine can be inspected under power by appointment. Subject to prior sale. Technical specifications and details are subject to change and error.

Condition: excellent (used), Overbeck 250i Internal Grinder, S/N 26586 , New 1990. Heidenhain 2 Axes DRO, Coolant, hydraulic, Electrical cabinet. Hnsdpfx Agsw U Tvyo Neu

Condition: good (used), Year of construction: 2001, STUDER S145 CNC internal and external cylindrical grinding machine TECHNICAL DATA Main dimensions: Center height: 175 mm Center width: 200 mm Distance from workpiece spindle nose to grinding spindle carrier: 850 mm Cross slide: Longitudinal axis Z1: 500 mm Smallest automatic path: 0.0001 mm Speed: 0,001 - 10`000 mm/min Resolution: 0.0001 mm Reversing delay: 0 - 9.9 s Cross axis X1: 120 mm Smallest automatic path: 0.0001 mm Speed: 0.001 - 5000 mm/min Resolution: 0.0001 mm Grinding spindle carrier: Turret grinding spindle carrier with 4 tool positions: 120 mm Bore: 100 / 120 mm External grinding device with wheel up to: 250 mm Fixed workpiece headstock: Speed range: 0-1500 rpm Spindle nose with centering diameter: 85 mm Spindle clearance: 50 mm Drive power: 3 kW Spindle torque: 30 Nm Load during fly grinding: 180 Nm Hjdpot Hxv Usfx Ag Njnu Roundness accuracy during fly grinding: 0.0005 mm Spindle nose: Camlock 6 Control: Fanuc Series 16 GC We assume no liability for the correctness, completeness and up-to-dateness of the information.

Condition: like new (used), functionality: fully functional, tool type: VDI 40, overall weight: 10 kg, At a glance Hnodpfoxltzvjx Ag Nou  Extremely compact construction for critical length threads  Thanks to disengaging clutch thread length is precisely controlled  One single head for internal and external threads  Integrated coolant supply (with coolant feed through centre on request)  Available in  ANGST Flex or ESX (ER) Collets  Sizes 1, 2, 3, 4 and 6  All usual shanks e.g. cylindrical, cylindrical with flat (Weldon), DIN 69880 / VDI 3425, SK DIN 69871, BT (Japan Standard MAS 403), ISO Caterpillar and Morse taper  Heavy-duty and durable Swiss quality products PAFIX Tapping Head for CNC machines  The PAFIX CNC head has been designed especially for all machines with programmable forward and return feeds to the toolholder (turret, spindle, etc.). It is of extremely compact length and is fitted with a positive disengaging clutch which can be set to 3 different pull-out lengths if required, for example with head size 25-2…, 1,5/3/5 mm.  The head can be set to two different programmed tapping cycles as follows. Both cycles ensure a certain amount of pitch compensation (float). In order to make sure of faultless thread cutting with precise starting point and depth or length of the thread, no spring take-up thread lead or friction clutch against overload has been provided. The PAFIX CNC is designed to permit a quick change over from tapping head to die head. Simply unscrew the collet nut and replace with the die housing.

Condition: good (used), Year of construction: 1995, functionality: fully functional, Technical details internal diameter 800 mm grinding depth 500 mm swing diameter 850 mm weight of the machine ca. 6,4 t Additional information Used internal cylindrical grinding machine with face grinding device in special design with enlarged swing diameter and extended, hydraulic transverse movement Reconstructed and modernized 1995 in the Glauchau manufacturer’s plant, put into operation 1996 1. TECHNICAL DATA 1.1 Working area Grinding diameter in the workpiece guard internal grinding, min./max. mm 30/630(800) External grinding, max. mm 800 Grinding depth, up to approx. mm 500 Table stroke mm 800 Workpiece diameter, max. mm 800 Swing diameter in workpiece protection, max. mm 800 Hnsdpfx Agexfr Uuo Neu Without workpiece protection, approx. mm 850 Distance from workpiece spindle head to grinding spindle carrier, max. mm 1225 Adjustment of the internal grinding device on the table, max. mm 545 1.2 Workpiece headstock Cross shift, max. mm 650 Cross adjustment via gear motor and positioning device with HEIDENHAIN digital position display Swivel, max. degrees 15 Workpiece spindle Speeds rpm 16/22/32/ 45/63/90/ 125/18/250 Load capacity, max 1000 Spindle head (with bayonet flange) DIN 55021 size 11 Machine accessories: 2-axis digital displays made by HEIDENHAIN Coolant system with magnetic separator Fixators (machine shoes) Various grinding wheels Diamond dresser Large face plate Internal and face grinding device Halogen machine lamp Machine documentation

Condition: excellent (used), Shrinkage Caliper gauge Hnodefhkdtspfx Ag Neu Make Preisser Measuring length 300 mm Shrinkage : 1,75% , 2% , 2,5

Condition: used, Year of construction: 1983, internal diameter min / max: 10 / 250 mm grinding depth 400 mm external diameter max. 380 mm swing dia. 390 mm table travel max. 550 mm stroke of the table min. 2 mm rapid traverse 10 m/min table speed -stepless- 0 - 10 m/min rough adjustment 18 mm fine adjustment 4 mm max. workpiece weight 100 kg spindle head B 6 DIN 55021 spindle turning speed - stepless 15 - 1.500 U/min pivoting angle +/- 30 Grad spindle bore 50 mm power capacity 2 kW rapid traverse 0 - 250 mm/min Hedpfx Agsvprxfj Nenu stroke 70 mm power requirement 3 kW weight of the machine ca. 2,7 t dimensions of the machine ca. 3,0 x 3,0 x 3,2 m Internal Grinding Machine BAHMÜLLER - JES 12 - new control (July 2015)

Condition: used, Year of construction: 2002, Adcole 1200 dh camshaft inspection, s/n 7736, setp 2002, Hnsdpfxow U Subo Ag Nou 4310 kgs, machine, electrical cabinet, printer/computer cabinet, machine dimensions 1700mm x 1300mm x 2370mm

Condition: used, Year of construction: 2012, machine/vehicle number: IntNr230381, used CNC Tsugami HS2075AX with B-axis, year of manufacture 2012 Operating hours: 7,200 Control: Fanuc 31i-A Hnsdpoxl U Epefx Ag Nou Maximum machining length: 250 mm Number of controlled axes: 7 (up to 5-axis simultaneous machining) B-axis: 0°–130°, freely programmable Bar capacity: Ø 3 mm to max. Ø 20 mm Main spindle drive power: 3.7 kW Counter spindle drive power: 2.2 kW Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C-axis: available on both main and counter spindle Number of linear tool carriers: 2 Total number of tools: 35 Dimensions (LxWxH): 2,110 x 1,200 x 1,885 mm Weight: 3,300 kg Convertible between long and short turning Deep-hole drilling stations NAKANISHI high-speed spindle Rear turret with Y-axis Cross-drilling on rear side Chip conveyor Fire suppression system FMB Minimag 20 bar feeder, year 2012 The machine can be inspected under power by prior arrangement. Technical data and information are subject to change and error; prior sale reserved.

Condition: good (used), Hoffmann 3-point internal micrometers No. 42915, 4 pieces: 1x measuring range 35 mm - 40 mm, 1x measuring range 30 mm - 35 mm, 1x measuring range 25 mm - 30 mm, 1x measuring range 20 mm - 25 mm, plus 2 calibration rings and wooden case. Complete package. For details, accessories and condition, see images. Hedpexl Dvqsfx Ag Nonu

Condition: used, Year of construction: 1998, operating hours: 95,000 h, machine/vehicle number: IntNr231314, Technical Data CNC control: FANUC 16iM - 16i Operating hours: 95,000 h Travel (X × Y × Z): approx. 500 × 380 × 300 mm Table size: 650 × 380 mm Spindle taper: ISO/BT 30 Spindle power: approx. 5.5 kW Spindle speed: up to 8,000 rpm Rapid traverse: approx. 48 m/min Tool magazine: approx. 14 positions (ISO30 - BT30) Chip and coolant tank with pump Integrated fluid lubrication system Hjdpfx Aexiwv Seg Nenu The machine can be inspected under power by prior appointment. Technical data and specifications are subject to change and correction. Prior sale reserved!

Condition: excellent (used), Inside micrometer tManufacturer: Mitutoyo Hnodpewykicjfx Ag Nsu Type: 511-176.05 (28651) Measuring range: 160 - 250 mm

Condition: used, Year of construction: 2004, machine/vehicle number: IntNr231358, Heidenhain iTNC 530 Control Program Run ON: 49,000 hours Spindle ON hours: 42,300 Axes in movement: 45,000 X travel: 850 mm / automatic: 650 mm Y travel: 700 mm / without tool change, automatic: 600 mm Z travel: 500 mm / automatic: 500 mm Main Spindle: Max. speed: 18,000 rpm Internal coolant supply (IKZ) External coolant supply (AKZ) Main spindle drive power: 19 kW Tool holder: SK 40 Swiveling Rotary Table: Table diameter: 280 mm Swivel range A: -30° / +115° Rotational axis C: 360° Max. table load: approx. 1,000 kg Speed A: 25 rpm / C: 65 rpm Tool Changer: Number of tool stations: 32 Number of magazine positions: 88 Tool holder: SK 40 Max. tool diameter: 80 mm Max. tool diameter with free adjacent station: 125 mm Max. tool length: 300 mm Max. tool weight: 8.0 kg Feed Rates: Rapid traverse (X / Y / Z): 45 m/min Measuring system resolution: 0.0001 mm Total connected load: 41 kVA Machine weight: approx. 9.5 t Accessories: Complete documentation Chip conveyor Coolant unit Internal coolant supply Hydraulic unit NC swiveling rotary table Hsdpfx Agsxiwhus Njnu Tool changer 2 x 80 positions Electronic handwheel Renishaw probe The machine can be inspected under power by appointment. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: excellent (used), Mitutoyo Frame Micrometer (28662) 103-155 OM-475, measuring range 450 - 475 mm Hjdpfx Asw Suwgeg Nenu

Condition: used, Year of construction: 2015, operating hours: 26,000 h, machine/vehicle number: IntNr231348, STAR SV-38R, year 2015, IntNr231348 FANUC 31i-B5 CNC control with 11 axes C-axis on main and sub-spindle Operating hours: 26,000 Machining time: 9,000 Main spindle: Max. speed: 7,000 rpm Spindle stroke: 350 mm Motor power: 7.5 kW continuous / 11 kW (10 min / 25% duty cycle) Sub-spindle: Speed up to 7,000 rpm, with C-axis Power: 5.5 kW continuous / 7.5 kW (10 min / 40% duty cycle) Cutting tool breakage monitoring Mechanical workpiece ejector Hjdpfx Agsxiwfao Nenu Parts ejector monitoring Blow-out device for sub-spindle Workpiece catcher Workpiece conveyor for discharge Extensive accessories: Hinged belt conveyor Small fire extinguishing system by Kraft und Bauer, incl. CO2 agent container Knoll high-pressure coolant system FMB Turbo 5-55 /3200 ‘A’ bar feeder The machine can be inspected under power by prior appointment. Technical data, specifications and availability subject to change and prior sale.

Condition: excellent (used), Internal precision measuring device Hnodpfovwau Rex Ag Nsu Brand Mitutoyo Measuring range 35-60 mm (28578) Type 511-168

Condition: excellent (used), Tapping attachment Efem No.1 for internal thread Mounting MK 2 Tapping head Adjustable slip clutch Thread M3 - M10 Mechanical condition very good Hnjdpfotqlq Eox Ag Neu optically there are traces of storage

Condition: excellent (used), Setting standards for micrometers Brand Mitutoyo 167-903 (28639) Hsdpjwn E Ivofx Ag Njnu Standard settings for micrometers in a set from 25-275 mm 11 pieces

Condition: excellent (used), 1 lot thread plug gauges ca.66 pieces in one drawer Dimensions, see pictures Hnsdpfoi Dr Akox Ag Nsu

Condition: excellent (used), Depth gauge Hsdjvcl Rzspfx Ag Nsnu Make Sylvac SA (108145) Type JP 500/0.01 Measuring length 500 mm Measuring accuracy 0.01 mm Length of measuring bridge 150 mm

Condition: excellent (used), Mitutoyo internal precision measuring instrument (28577) Type 511-167 Hnjdpfsvu T Apjx Ag Nou Measuring range 18 - 35 mm