Used Facing Lathe for sale (6,023)

Condition: excellent (used), Year of construction: 2008, turning height: 2,600 mm, total height: 9,500 mm, total width: 5,000 mm, total length: 13,500 mm, rotary table diameter: 5,000 mm, Carousel lathe BERTHIEZ - JO-9375 MACH-ID 9648 Make: BERTHIEZ Type: JO-9375 Year: 2008 Displacable table 5000 mm 4 Table jaws 4 Table extentions  Overhauled in 2008 CE-Mark  X Traverse leadscrew replaced Iisdpfx Agezcx Ttj Usc Servo engines and Linear scales Under power in North Spain Max. turning Ø: 10500mm Table Ø: 5000mm Single column or double column:Singel Moving table or column: Moving Chuck Speeds / ranges: 60Rpm Maximum turning height: 2600mm Length: 13500mm Width: 5000mm Height: 9500mm Weight: 93000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2011, XYZ Proturn SLX 1630 ProtoTRAK CNC Gap Bed Centre Lathe Ex Research machine – Superb Condition ProtoTRAK SLX Control (2011) Max’ Distance Between Centres 760mm Max’ Swing over Cross-slide 218mm Max Swing over Bed 400mm Spindle Bore 52mm Spindle Speeds 150 – 2500 rev/min Spindle Motor 5.75Kw Spindle Camlock D1-6 Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 60mm Tailstock Travel 127mm Manufactured | 2011 Weight 1560Kgs Supplied with: Two-axis CNC, Two-axis DRO. TRAKing, Constant surface speed. Electronic hand-wheels for X & Z Axes. Joystick for feed & rapids. Interlocked chuck guard and main guard. Quick change toolpost with holders. 3 Jaw chuck 5C Collet Chuck Coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #78211 Machine Serial Number: 16P99080-063 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use. Iiodpfozav D Djx Ag Usc

Condition: good (used), steady rest CNC Lathe VDF Wohlenberg - U1270 MACH-ID 9187 Iiodpfezcn Srjx Ag Uec Make: VDF Wohlenberg Type: U1270 Length:1400mm Width:800mm Height:1500mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2010, operating hours: 3,624 h, functionality: fully functional, travel distance X-axis: 398 mm, travel distance Z-axis: 1,250 mm, rotational speed (max.): 3,000 rpm, We offer in good condition Gildemeister NEF 600 with Heidenhain control, please note customer removes 3-jaw chuck. Machine will be sold without 3-jaw chuck. Iedpfsxrg S Iex Ag Ujic Technical Data: Turning diameter: 600mm Turning length: 1190mm Main spindle: Speed range – main spindle: 0 – 3,000 rpm Drive power – main spindle: 39.4 / 27.5 kW Max. torque: 430 Nm Spindle diameter at front bearing: 100 mm Spindle bore: 90mm Max. bar diameter: 75mm Turret: Number of tool stations: 12 pos - VDI 40 Travel: X-axis: 398mm Z-axis: 1250mm Tailstock: Tailstock travel: 1150mm

Condition: good (used), Year of construction: 1970, spindle bore: 105 mm, turning diameter over bed slide: 1,600 mm, turning length: 8,000 mm, total length: 13,210 mm, total width: 2,420 mm, total height: 2,400 mm, bed width: 1,100 mm, rotational speed (max.): 224 rpm, overall weight: 33,000 kg, workpiece weight (max.): 25,000 kg, Centre lathe POREBA - TCC160 MACH-ID 8822 Make: POREBA Type: TCC160 Year: 1970 Work load supported 2 steady 25.000 Kg Work load not supported 16000 Kg incl. 4 Chuck 1600 mm incl. 2 x Steady rest incl. internal grinding attachment incl. external grinding attachment Iedjzcm Rmjpfx Ag Ujic incl. milling saddle support DBC Turning Length: 8000mm Swing over bed Ø: 1600mm Swing over cross slide Ø:1250mm Spindle bore: 105mm Spindle power: 55kW Bed width: 1100mm Tailstock spindle Ø: 220Ø Stroke pinole: 600mm Spindle taper: Metric 80Mk Speeds / ranges: 224Rpm Feed rate X-Axis: 5000mm/min. Feed rate Z-Axis: 5000mm/min. Workpiece load: 25000 Length: 13210mm Width: 2420mm Height: 2400mm Weight: 33000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), turning length: 5,038 mm, spindle motor power: 80,000 W, spindle bore: 122 mm, travel distance X-axis: 490 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 5,038 mm, total height: 3,300 mm, total length: 16,000 mm, total width: 4,900 mm, overall weight: 30,000 kg, Multi-tasking lathe HEYLIGENSTAEDT - Heynumat 35/5000 MACH-ID 9642 Make: HEYLIGENSTAEDT Type: Heynumat 35/5000 Control: SIEMENS 840D Max. turning Ø: 890mm X-Axis: -10 to +490mm Y-Axis: -130 to +300mm Isdpfxjzcmzxs Ag Ujic Z-Axis: +180 to -5038mm Spindle bore: 122mm Speedrange: 2200Rpm Spindle power: 80kW B-Axis Toolsystem:Capto C8 Sandvik B-Axis Speedranges:2200Rpm B-Axis power: 28kW Length: 16000mm Width: 4900mm Height: 3300mm Weight: 30000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2023, functionality: fully functional, Hydrafeed Top Fusion 3.2 metre automatic bar feed. Iedsvzzzmspfx Ag Uoic Built in 2023, but never used or fitted to a machine, so still mostly in original packaging. Capable of holding up to 3.2m bar lengths with automatic adjustment to take bars from 8mm to 51mm diameter. We just don't have the space in our new building to fit it to our DMG turnmill machines, so had to buy the 1.5 metre versions instead. Cost £28,750 + VAT new, so >40% saving on list price for what is still a brand new machine.

Condition: used, total length: 6,800 mm, total width: 2,200 mm, total height: 2,000 mm, Empty weight: 11.000 kg Price: On request - Documentation available: Yes - CE certificate present: No - Drive system: Conventional - Centre height [mm]: 630 - Swing over bed [mm]: 1300 - Carriage turning diameter [mm]: 1000 - Distance between centres [mm]: 4000 - Bed width [mm]: 700 - Spindle bore [mm]: 120 - Min. spindle speed [rpm]: 2.8 - Max. spindle speed [rpm]: 400 - Options: Four-jaw chuck, Three-jaw chuck, Removable bed, Quick-change tool post, Fixed steady, Travelling steady - Swing over removable bed [mm]: 1700 - Transport dimensions: 6800mm x 2200mm x 2000mm (l x w x h) - Transport weight [kg]: 11000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Iisdpfex Iriaex Ag Usc Lukas van Rossum

Condition: good (used), Year of construction: 2002, turning length: 6,000 mm, spindle bore: 122 mm, travel distance X-axis: 90 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 6,110 mm, rotational speed (max.): 2,200 rpm, total height: 3,300 mm, total length: 16,000 mm, total width: 5,300 mm, overall weight: 32,000 kg, Multi-tasking lathe HEYLIGENSTAEDT - Heynumat 35/6000 MACH-ID 9643 Make: HEYLIGENSTAEDT Type: Heynumat 35/6000 Control: SIEMENS 840D Max. turning Ø: 890mm X-Axis: -10 to +490mm Y-Axis: -130 to +300mm Z-Axis: -180 to +6110mm Spindle bore: 122mm Speedrange: 2200Rpm Spindle power: 80kW ATC / revolver: 100 B-Axis Toolsystem:Capto C8 Sandvik B-Axis Speedranges:2200Rpm Iiodpfozclqlex Ag Ujc B-Axis power: 28kW Length: 16000mm Width: 5300mm Height: 3300mm Weight: 32000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1979, total height: 1,700 mm, total length: 4,900 mm, total width: 1,900 mm, Empty weight: 8.000 kg Metal turning lathe Model: Conventional Manufacturer: TOS Type: SU-100 Centerdistance: 2000mm Turningdiameter above bed: 1050mm Spindle-hole: 105mm Motorpower: 22kW Spindle-speed: 2,24-450rpm Max. workpiece weight: 5000kg Including 4-jaw-chuck + lynette Machine-dimensions: 4900x1900x1700mm Machine-weight: 8000kg Machine has been tested, in very good condition Video is available - Year: 1979 - Documentation available: No - CE certificate present: No - Serial number: 0429412 - Drive system: Conventional - Power [kW]: 22.0 Iedpfewnhf Rex Ag Ueic - Swing over bed [mm]: 1050 - Distance between centres [mm]: 2000 - Spindle bore [mm]: 105 - Min. spindle speed [rpm]: 2.24 - Max. spindle speed [rpm]: 450 - Options: Four-jaw chuck, Fixed steady - Transport dimensions: 4900mm x 1900mm x 1700mm (l x w x h) - Transport weight [kg]: 8000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, Control system: SIEMENS 840D Turning diameter: 2,800 mm Turning height: 1,000 mm Load capacity: 16,000 kg Max. swing diameter, approx.: 2,800 mm Turning diameter - external, max.: 2,800 mm Spindle speed: 63 rpm Cross slide travel: 620 mm Ram stroke - max.: 690 mm Tool interface: CAPTO 6 Included: Chip conveyor 2 supports Iisdpfxszfn Hyj Ag Usc 4-position tool turret Hydraulic chuck

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, Control system: SIEMENS 840D Machining diameter: 4,000 mm Iisdpfezfn Evsx Ag Usc Machining height: 1,400 mm Travel of the rotary table: 850 mm Max. swing diameter, approx.: 4,200 mm Turning diameter – external, max.: 4,000 mm Travel of the cross slide: 850 mm Ram stroke – max.: 950 mm Tool holder: CAPTO 6 Included: Chip conveyor 2 tailstocks 4-position tool turret Hydraulic chuck, 2,800 mm

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, turning diameter over bed: 540 mm turning length: 1.500 mm turning diameter in the recess: 580 Working travel of the lower slide max. approx.: 415 mm adjustment of upper support, max. approx.: 140 mm Iisdpfx Aezfnd Ssg Uoc turning speed range: 0 - 1.800 U/min diam. of main spinde: 135 mm spindle bore: 68 mm internal taper diameter: 73 mm bed width: 403 mm Equipped with: Three jaw chucks FORKARDT 250 Digital read out 3 axis fixed steady rest feed safety chip tray tool holders, 6 chisel holders, 1 holder for clamping sleeve

Condition: used, Year of construction: 2006, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Iiodpfx Ajzfmu Nsg Uoc Face slide travel: 380 mm Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Number of tool stations: 12 With tool drive for 6 stations Tool holder system (DIN69880) VDI40 Equipment SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) COMBI control station C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600

Condition: used, Year of construction: 2016, turning diameter 366 mm turning length 700 mm control Celos Mitsubishi M730U turning diameter over bed 920 mm turning diameter over cross slideways 742 mm max. turning speeds 4.000 min/-1 drive capacity - main spindle 18,5/18,5/15 kW max. rod diameter 80 mm number of tool places 12 Pos. tool taper BMT 80 x-axis 260 mm z-axis 795 mm y-axis +/- 50 mm mm tailstock taper MT5 Number of working hours ca. 20.564 h auto power on hours ca. 28.664 h weight of the machine ca. 4,7 t The machine has been overhauled with the following components: - Ball screws in the X, Y, and Z axes - New main spindle - Complete maintenance package - Recalibrated and recalibrated This puts the machine in like-new technical condition. There are 2 machines available. Price per unit. Technical Features: - 12-position BMT 80 tool turret, max. speed 10,000 rpm, 5.5/5.5/3.7 kW - Y-axis - Overhang for driven tools 100 mm - Scraper-belt chip conveyor - Coolant system with increased pressure of 5 bar Accessories: - Coolant shower on the main spindle chuck - Compressed air blow-off system for tool cutting edges - Line filter for coolant system - Compressed air blow-off system for tailstock center - Mechanical I/F for 150 mm oil mist separator - 4-color signal light Iedpfx Ageyvvt Sj Uoic - EtherNET I/P interface for automation Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2001, turning diameter 340 mm turning length 750 mm control SYSTEM TX 8H spindle passage 80 mm swing over plan sled 530 mm greates pass round over bed 665 mm turning speed range - main spindle 3.150 min/-1 drive capacity - main spindle 22 kW number of tool places 12 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Two machines are available. Price per unit. Machine 1: - Images 1-5 - Operating hours approx. 55,790 h Machine 2: - Images 6-10 - Operating hours approx. 54,347 h Technical Features & Accessories: - Y-axis - Accessory package with rigid and driven tool holders - Chip conveyor Iiedpsxwdw Esfx Ag Uoc Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 1995, turning diameter 450 mm turning length 1.125 mm control FANUC MSC 518 turning diameter over bed 520 mm bar material dia. 70 mm x-axis 260 mm z-axis 500 mm spindle tunring speed 30 - 3.000 U/min spindle nose JIS A2-8 spindle bore 80 mm spindle bearing diameter 130 mm Number of tools in turret 12 rapid travel - longitudinal/face 15 m/min power capacity 15/11 kW total power requirement 42 kW weight of the machine ca. 5 t dimensions of the machine ca. 3,6 x 1,7 x 1,8 m In our assessment, the machine is in good used condition and can be inspected under power by appointment. Iodpfx Agsxr Rbyj Uoic Technical Features & Accessories: - LG 10 portal loading system with workpiece stacking device up to D=200 and max. 10 kg - Kitagawa 250 mm power chuck - Hollow clamping device - Chip conveyor - High-pressure cooling 5 bar - Tailstock Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: like new (used), functionality: fully functional, center height: 140 mm, spindle bore: 25 mm, spindle speed (max.): 2,200 rpm, spindle speed (min.): 55 rpm, total height: 1,750 mm, total length: 1,530 mm, total width: 750 mm, The three-phase, 380-volt, two-speed motor is running smoothly! Iisdpozdvtfefx Ag Usc This machine is in excellent condition! Geared headstock, with gears running in freshly changed oil! 8 spindle speeds, adjustable from 55 to 2200 RPM. Power feed in both the longitudinal and transverse directions. Norton gearbox for easy thread cutting. MT2 tailstock spindle. Induction-hardened bedways. Machine light. Chuck safety guard. Quick-change toolpost. Emco 140mm 3-jaw chuck. Distance between centers: 650mm Center height: 140mm Spindle bore: 25mm Emco FB2 milling attachment. Geared head, with gears running in oil. Head adjustable in height and angle. MT2 spindle. 6 spindle speeds, adjustable from 120 to 2000 RPM. Tooling cabinet included! Includes all accessories as shown in the last 7 pictures. Overall dimensions: 153x75x175cm Contact us for shipping options! €7,000.00 excluding VAT!

Condition: excellent (used), Toshiba TX 16 Elevating Rail Vertical Borer Iiedpfxoy N Aqwe Ag Uec Manufacturer Toshiba Model TX 16 Year 1981 Condition Used Serial Number 320156 Stock Number 2513 Table 1600mm dia with 4 x Adjustable clamping jaws Swing 2000mm Under Rail 1500mm Vertical Travel distance of C/slide 46″ Vertical Slide travel 1000mm Main Motor 30HP/22Kw Turret 5 Positions, 5 adaptors + 3 extension Bars. Copy Turning Unit. X & Z DRO. Swing Pendant Control & Fixed Station control panels for copy unit.

Condition: used, Craven 2000mm x 8000mm Heavy Duty Lathe 2000mm swing over bed 1500mm swing over saddle 8,000mm between centres Main drive 60kW, 40 ton load capacity Spindle speeds 2 – 152 rpm Steadies Iijdpfsx Hp Iwsx Ag Ujc 2000mm Bed extension

Condition: excellent (used), XYZ SLX 555 x 3M CNC Lathe (2016) Stock Number 2851 Protrak SLX CNC Swing over bed 560mm Swing in gap 935mm Swing over cross slides 350mm Distance between centres 3000mm Spindle bore 104mm Additional Features Iiodpfx Aox Hp I Rjg Ujc Protrack SLX Control Drilling Attachment 4 Way Toolpost 3 Jaw Chuck 3 Point Steady

Condition: excellent (used), Tuscan LC38 x 3000mm CNC Lathe Swing Over Bed 970mm Swing Over Cross Slide 420mm Centre Height 490mm Distance Between Centres 3000mm 12 Station Duplimatic Turret Tailstock Boring Bat Attachment Boring Bar 2 x 3 Point Fixed Steady 1 x Travelling Steady Fanuc OiTC Control Iedovtw Imspfx Ag Ujic C Axis & Driven Tools Serial Number LC223806086 Year 2010 /10

Condition: excellent (used), Harrison V390 Vari Speed Gap Bed Lathe (2004) Model V390 Year 2004 Condition Used Swing Over Bed 400mm Iisdoxwkwxjpfx Ag Ujc Distance Between Centres 1250mm Swing Over Cross Slide 246mm Height of Centres 195mm Bed Length between Centres 1250mm Swing over Bed 400mm Swing in Gap 585mm Swing over Cross Slide 246mm Spindle Bore 54mm Morse Taper in Nose Bush No. 4 MT

Condition: excellent (used), Tacchi HD/1450 X 4M Large Spindle Bore (515mm) Iodoxg Ivdspfx Ag Ujic Year 2002 Siemens CNC Control Swing over bed 1450mm Swing over saddle 1000mm Hollow spindle 515mm Chucks front and rear of Headstock Speed range 1.5 – 450 rpm 15,000kg weight between centres Baruffaldi 4 way Auto Toolpost 2 x 3 point steadies

Condition: excellent (used), Tacchi HD/1450 – 725 x 4000mm CNC Lathe (2012) Serial Number: 7264 Year: 2012 Iedexc In Sopfx Ag Usic Control: Fanuc OiTD CNC Condition: Used – good working order Technical Specifications: Centre height: 725mm Swing over bed: 1450mm Swing over cross slide: 1000mm Distance between centres: 4000mm Main drive motor: 60 kW Maximum weight between centres (unsupported): 15,000 kg Spindle speed range: 1.9 – 560 rpm Features & Equipment: 2 x 3-point steady rests Handwheel Swarf conveyor 4-position hydraulic toolpost 4-jaw chuck Fanuc OiTD CNC control