Used Falling Film Evaporators for sale (2,096)
Sort results
- Lowest price Highest price
- Newest listings Oldest listings
- Shortest distance Farthest distance
- Newest year of manufacture Oldest year of manufacture
- Latest update Oldest update
- Manufacturer A to Z Manufacturer Z to A
- Relevance
- Lowest price
- Price
- Highest price
- Price
- Newest listings
- Release date
- Oldest listings
- Release date
- Shortest distance
- Distance
- Farthest distance
- Distance
- Newest year of manufacture
- Year of construction
- Oldest year of manufacture
- Year of construction
- Latest update
- Update
- Oldest update
- Update
- Manufacturer A to Z
- Manufacturer
- Manufacturer Z to A
- Manufacturer
- designation from A to Z
- Description
- designation from Z to A
- Description
- Model from A to Z
- Model
- Model from Z to A
- Model
- Lowest reference
- Ref.No.
- Highest reference
- Ref.No.
- Shortest runtime
- Runtime
- Longest duration
- Runtime
- Relevance
- Relevance
Success:
Your message has been sent.
Listing
Forst
1,069 km
Falling- film evaporator
Konzentrat-Verdampfer
Call
Condition: as good as new (ex-display), Falling-film evaporator – unused –
Iodpfx Ajd Hb Aconwjtp
The machine consists of three units that need to be connected in series:
- Evaporator (58 pipes), Length: 12.000 mm
- Condenser (19 pipes), Length: 15.000 mm
- Condenser (48 pipes), Length: ca. 15.000 mm
All units are unused and made of stainless steel (AISI 304 / 1.4301).
The evaporator was designed for the production of protein powder (dairy industry) and represents the final element of a drying chain. It evaporates the remaining water in the dryer and thus leads to a high concentration of the end product.
Since the units have never been in use, they are in excellent quality. Sale without electrical components or control panel.
Success:
Your message has been sent.
Listing
United Kingdom
0 km
49 Sq. Ft. Pfaudler Balfour Stainless Steel Wiped Film Evaporator
PFAUDLER49 Sq. Ft.
Call
Condition: used, Used Pfaudler Balfour approximately 4.64 m2 stainless steel wiped film evaporator. Evaporator body approximately 700mm diameter X 2100mm straight side. Internal 1460 litre capacity rated full vacuum/1 bar design pressure at 0-160 °C. Jacket 250 litre capacity rated full vacuum/6 bar (5 bar with full vacuum) design pressure at 0-160 °C. Rotor belt driven by 5.5 kw 415 volt 3/50 1440 rpm motor via Flender model ZF80A gearbox rated 10.29/1 reduction ratio.
Iodoyh Na Eopfx Anwetp
Success:
Your message has been sent.
Auction
Ends in
d
h
min
s
Auction ended
Denmark
807 km
Bag forming, filling and sealing machine
FujiFW 3700/B & FW 3400/B
Condition: used, Year of construction: 1998, No minimum price – guaranteed sale to the highest bidder!
DDMQ-F I I 390
TECHNICAL DETAILS
Capacity: 10–100 pieces/min
Isdps Ahglusfx Anwotp
Cutting length: 140–350 mm
Max. cutting length: 900 mm
Product width: max. 200 mm
Product height: max. 80 mm
Film width: max. 600 mm
Film outer diameter: max. 300 mm
MACHINE DETAILS
Rated power: 30 A / 6 kW
Dimensions & Weight
Dimensions (L x W x H): 5,125 x 1,400 x 1,450 mm
Weight: approx. 1,100 kg
Power supply: 3-phase, AC 200 V
Permissible voltage fluctuation: ±10 %
FUJI DDMQ-F 1 3391
TECHNICAL DETAILS
Capacity: 10–200 pieces/min
Cutting length: 90–150 mm
Max. cutting length: 900 mm
Product width: max. 140 mm
Product height: max. 40 mm
Film width: max. 430 mm
Film outer diameter: max. 300 mm
MACHINE DETAILS
Rated power: 30 A / 6 kW
Dimensions & Weight
Dimensions (L x W x H): 4,625 x 990 x 1,450 mm
Weight: approx. 1,000 kg
Power supply: 3-phase, AC 200 V
Permissible voltage fluctuation: ±10 %
Success:
Your message has been sent.
Auction
Ends in
d
h
min
s
Auction ended
Bayern
1,286 km
2019 serviced + safety inspection (UVV) valid until 10/2027, Still RX20-18
StillRX 20-18
Condition: used, machine/vehicle number: 516223V00900, Year of construction: 2019, operating hours: 4,777 h, load capacity: 1,800 kg, lifting height: 4,500 mm, mast type: triplex, No minimum price – guaranteed sale to the highest bidder!
TECHNICAL DETAILS
Load capacity: 1,800 kg
Lifting height: 4,500 mm
MACHINE DETAILS
Mast design: Triplex mast with full free lift
Drive type: Electric
Battery year of manufacture: 2019
Battery voltage: 48 V
Battery capacity: 625 Ah
Measured idle voltage: 50.83 V
Itodpfx As Ahrcaenwsp
Dimensions & Weight
Dimensions (L x W x H): 3,000 x 1,150 x 2,060 mm
Own weight: 3,400 kg
Service valid until: 10/2027
UVV inspection valid until: 10/2027
Operating hours: 4,777 h
EQUIPMENT
Former Still full-service unit
Battery charger
Fork positioner with side shift
Side fall protection
LED work light at the rear
Orange warning light
Comfort seat with lumbar support
Seat heating
Hydraulic valves: 3rd and 4th valve
Collection conditions:
Side loading up to 6 tons is possible with a large forklift on site. Loading is done at your own risk.
Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm.
Collection is only possible after receipt of payment confirmation by email.
Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00.
If collection is not done on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection.
Lot number: 219
Success:
Your message has been sent.
Auction
Ends in
d
h
min
s
Auction ended
Gelderland
694 km
Huettlin HB-750 - Coating pan
HuettlinHB-750
Year of construction: 1994, condition: used, empty load weight: 5,000 kg, inner diameter: 2,070 mm, rotational speed (max.): 15 rpm, machine/vehicle number: HUE-100794, Equipment: documentation/manual, No minimum price – guaranteed sale to the highest bidder!
TECHNICAL DETAILS
Type: Coating pan / film coating system
Quantity: 1
Material: Stainless steel 1.4301 (304)
Pan
Batch size: 200–600 kg
Pan diameter: 2,070 mm
Pan depth: 1,560 mm
Inlet/outlet: ø 700 mm
Pan speed: approx. 1.5–15 1/min
MACHINE DETAILS
Drive
Motor power, pan drive: approx. 9.2 kW
Voltage, pan drive: 400 V
Process air
Heating capacity, electric: 210 kW
Number of blowers: 2
Motor power, blower 1: 7.5 kW
Voltage, blower 1: 380 V
Motor power, blower 2: 15 kW
Voltage, blower 2: 400/690 V
Number of air filters: 2
Dimensions and weight
Footprint: 3.7 x 2.3 m
Overall height: 3.2 m
Itjdpfx Anj Ai A D Howop
Weight: 5,000 kg
EQUIPMENT
Mounted on a frame
Frequency inverter
Electric heating
Air filter DCE Unimaster, type UMA-454 V
Spray arm
Metering pump, manufacturer Walther Trowal
Control cabinet (condition as inspected)
Discover more used machines
Success:
Your message has been sent.
Auction
Ends in
d
h
min
s
Auction ended
Gelderland
694 km
Loedige LHC-130 - Coating pan
LödigeLHC-130
Year of construction: 1992, condition: used, empty load weight: 1,650 kg, inner diameter: 1,300 mm, Equipment: documentation/manual, No minimum price – guaranteed sale to the highest bidder!
TECHNICAL DETAILS
Coating drum
Batch size: max. 150 kg
Drum diameter: 1,300 mm
Cylindrical width: 350 mm
Perforated zones: 4 x 290 x 230 mm
Discharge valve: approx. 300 x 70 mm
Material: Stainless steel 1.4401 (316)
MACHINE DETAILS
Motor power: approx. 3.0 kW
Voltage: 415 V
Dimensions and weight
Space requirement: 2.2 x 1.8 m
Overall height: 2.3 m
Weight: 1,650 kg
Dimensions of control cabinet: 2.8 x 0.5 x 2.1 m
Itedpfx Aj Ai Ndcsnwep
EQUIPMENT
Suitable for film and sugar coating
Partially perforated drum
Pneumatically operated discharge valve
Spray arm
Control cabinet
Ex-protected motor
ATEX version
Success:
Your message has been sent.
Auction
Ends in
d
h
min
s
Auction ended
Bayern
1,286 km
Battery 02/2022, serviced and safety inspection (UVV) valid until 07/2027
LindeE 45/600H
Condition: used, machine/vehicle number: H2X388V00629, Year of construction: 2019, operating hours: 18,779 h, load capacity: 4,500 kg, lifting height: 3,700 mm, No minimum price – guaranteed sale to the highest bidder!
TECHNICAL DETAILS
Load capacity: 4,500 kg
Lifting height: 3,700 mm
Fork length: 2,400 mm
MACHINE DETAILS
Drive type: Electric
Dimensions & Weight
Dimensions (L x W x H): 5,200 x 1,450 x 2,800 mm
Dead weight: 8,000 kg
Battery: 80 V, 775 Ah
Battery voltage in idle state: 83.1 V
Service valid until: UVV valid until: 07/2027
Operating hours: 18,779 h
EQUIPMENT
Fork positioner with side shift
Integrated scale
Facelift model with tilt angle indicator
Windshield with windshield wiper
Roof panel
Lateral fall protection
White, non-marking tires
LED work light at the front
LED work light at the rear
Road traffic lighting with turn signals
Safety light at the front
Safety light at the rear
Comfort seat with lumbar support and seat heating
Hydraulic valves: 3rd and 4th valve
All dimensions are rounded values. No guarantee is given for typographical or measurement errors.
Ijdpfo Ahq R Tox Anwstp
Collection conditions:
Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk.
Rear loading via ramp is possible at a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm.
Collection is only possible after receipt of the payment confirmation by email.
Collection without prior notification from Monday to Friday between 07:00 and 16:00.
If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection.
Lot number: 74
Success:
Your message has been sent.
Auction
Ends in
d
h
min
s
Auction ended
Gelderland
694 km
Pester PEWO PACK 450 - Transwrap machine
PesterPEWO PACK 450
Condition: used, Year of construction: 1997, machine/vehicle number: 4047, overall weight: 2,320 kg, working width: 300 mm, Equipment: documentation/manual, No minimum price – guaranteed sale to the highest bidder!
TECHNICAL DETAILS
Packaging
Type: Tube bag machine
Film material: PE
Film thickness: 0.02–1.0 mm
Sealing width: 30–300 mm
MACHINE DETAILS
Electrical power: 16.0 kW
Dimensions and weight
Footprint: 5.0 x 1.5 m
Overall height: 2.2 m
Weight: 2,320 kg
EQUIPMENT
Control cabinet (condition as inspected)
Mounted on a frame
Itedpfe Akby Hsx Anwep
Product-contact parts made of stainless steel
Success:
Your message has been sent.
Auction
Ends in
d
h
min
s
Auction ended
Nordrhein-Westfalen
895 km
Wide belt sander
HEESEMANNFGA 6
Condition: excellent (used), Year of construction: 1992, functionality: fully functional, grinding width: 1,300 mm, overall weight: 4,200 kg, working height: 880 mm, No minimum price – guaranteed sale to the highest bidder!
TECHNICAL DETAILS
Sanding width: 1,300 mm
Working height: 880 mm
Workpiece thickness: max. 80 mm
Workpiece thickness: min. 3 mm
Drive power: 2.5 kW
Feed rate: 4.5–22 m/min
Feed rate control: stepless
Brush roller unit
Brush roller diameter: 150 mm
Drive power: 1.5 kW
Bristle material: Fibre
Height adjustment: central
Longitudinal sanding unit
Sanding belt length: 2,620 mm
Sanding belt width: 1,350 mm
Sanding belt speed: 0.3–12 m/s
Drive power: 11 kW
Sanding belt running direction: counter-rotating
MACHINE DETAILS
Distance between guide rollers: 40 mm
Workpiece vacuum clamping system
Fan power: 5.5 kW
Operating side: left
Operator terminal: graphical
Operating voltage: 400 V
Frequency: 50 Hz
Dimensions & Weight
Dimensions (L x W x H): 2,550 x 2,220 x 2,300 mm
Weight: approx. 4,200 kg
EQUIPMENT
Suitable for intermediate sanding of coated surfaces, wood smoothing, and film sanding
Transport table with individual conveyor belts
Refurbished conveyor belt
Steplessly adjustable feed rate
Itodpfxs Ah Rt Hj Anwjp
Dust extraction system
Brush roller unit with central height adjustment
Stepless electronic sanding belt speed control via frequency inverter
Wear-free braking system
Pneumatic sanding belt tensioning
Intermittent belt dust extraction system
Infrared belt control
Graphical operator terminal for entering machine setting values
Numerical thickness adjustment
Fault source display
Workpiece throughput display
Feed rate display
Electronically controlled pressure bar with automatic adjustment of the contact surfaces to the workpiece shape
Workpiece vacuum clamping system with fan
Success:
Your message has been sent.
Listing
Dunajská Streda
1,661 km
Lecithin Dryer – Thin Film Evaporator
Huatai1.5 TPD Lecithin Drying Line
Call
Condition: new, functionality: fully functional, For sale: Huatai 1.5 TPD lecithin drying line with thin film evaporator and vacuum system.
New / unused lecithin drying line for soybean lecithin processing, supplied by Huatai.
The line is designed for vacuum drying of crude / wet lecithin and reduction of moisture under controlled temperature and vacuum conditions.
Main equipment includes:
Thin film evaporator / lecithin dryer
Lecithin conditioning tank
Finished product tank
Hot water tank
Lecithin cooler
Vacuum pre-condenser
Vacuum liquid seal tank
Receiving / collection tanks
Steam separator / steam distribution vessel
Pumps, piping, valves and auxiliary equipment
Electrical control cabinet / MCC
Technical data:
Capacity: approx. 1.5 TPD lecithin
Process: vacuum drying / thin film evaporation
Installed power: approx. 25.2 kW
Product contact parts according to manufacturer specification
Equipment finish: carbon steel vessels, painted industrial finish; stainless steel parts where required by process design
Typical application:
soybean lecithin drying
crude lecithin moisture reduction
vegetable oil refinery lecithin processing
lecithin concentration after degumming
food / feed / industrial lecithin processing
The line is suitable for small and medium vegetable oil processors who want to add lecithin drying and value-added lecithin production to an existing degumming / oil refining process.
The equipment is new and unused.
Manufacturer: Huatai.
EU seller: Leonagra s.r.o.
EU invoice possible.
Delivery to Europe can be arranged.
The listing includes a process schematic and a realistic visual representation of the complete line. Final layout and painting colour can be coordinated before delivery.
Inspection / video call with manufacturer can be arranged on request.
Price: FCA / delivered EU by agreement, plus VAT where applicable.
Zu verkaufen: Huatai 1,5 TPD Lecithin-Trocknungslinie mit Dünnschichtverdampfer und Vakuumsystem.
Neue / unbenutzte Anlage zur Vakuumtrocknung von Sojalecithin.
Die Anlage ist für die Trocknung von Rohlecithin bzw. feuchtem Lecithin unter kontrollierten Vakuum- und Temperaturbedingungen ausgelegt.
Hauptkomponenten:
Dünnschichtverdampfer / Lecithin-Trockner
Lecithin-Konditionierungstank
Fertigprodukttank
Heißwassertank
Lecithin-Kühler
Vakuum-Vorkondensator
Vakuum-Flüssigkeitsverschlussbehälter
Auffang- / Sammeltanks
Dampfverteiler
Pumpen, Rohrleitungen, Ventile und Zubehör
Schaltschrank / MCC
Technische Daten:
Kapazität: ca. 1,5 TPD Lecithin
Verfahren: Vakuumtrocknung / Dünnschichtverdampfung
Installierte Leistung: ca. 25,2 kW
Industrieausführung mit lackierten Kohlenstoffstahlbehältern; Edelstahlteile dort, wo prozesstechnisch erforderlich
Geeignet für Sojalecithin, Pflanzenölraffination, Lecithin-Trocknung nach Degumming und kleinere bis mittlere Ölmühlen / Raffinerien.
Hersteller: Huatai.
Verkäufer in der EU: Leonagra s.r.o.
EU-Rechnung möglich.
Lieferung nach Europa kann organisiert werden.
Besichtigung / Videocall mit dem Hersteller auf Anfrage möglich.
Itedpfx Anozivkbowsp
Preis: nach Vereinbarung, zzgl. MwSt.
Success:
Your message has been sent.
Listing
Rotterdam
650 km
Evaporative condenser
EvapcoMOD.ATC-642E
Call
Year of construction: 2021, condition: excellent (used), functionality: fully functional, The refrigerant gas exits the compressor and flows to the air inlet connection of the ATC-E condenser. Heat from the refrigerant is transferred through the heat exchanger tubes to the water that flows downward through the tubes. Simultaneously, air is drawn into the air inlet grilles at the base of the condenser and flows upward over the heat exchanger, counter to the water flow. A small portion of the water evaporates, and heat is removed from the system. The warm, moist air is drawn by the fan to the top of the evaporative condenser and released into the atmosphere. The remaining water falls into the collection basin at the bottom of the condenser, where it is recirculated through the water distribution system and flows down over the heat exchanger.
Thermal-Pak II Heat Exchanger
EVAPCO's Thermal-Pak II heat exchangers, featuring a patented design, ensure maximum cooling capacity. The airflow through the heat exchanger is countercurrent to the fluid flow, resulting in the most efficient heat transfer process. A specially designed heat exchanger is used to reduce air pressure drop across the unit while maximizing the tube surface area and increasing the heat transfer capacity.
Elliptical return bends provide more circuits per heat exchanger bundle and increase the maximum capacity per footprint.
The heat exchanger is located in the airflow, resulting in an increase in the dry-bulb temperature.
CrossCool internal tube enhancement increases fluid turbulence and provides additional evaporative capacity.
Available in type 304 SS or type 316 SS construction.
Drift eliminators
Limit drift rate to no more than 0.001% of the recirculated water flow rate.
Minimize the risk of Legionella spread.
Constructed with an inert polyvinyl chloride (PVC).
Superior air inlet louvers and screen design.
Constructed with an inert polyvinyl chloride (PVC).
Two-tier design that minimizes drift loss and the potential for algae growth in the tower.
Framed in steel in easily removable sections.
Pressurized water distribution system
EVAPCO's zero-maintenance ZMII® spray nozzle remains clog-free, allowing for even and consistent water distribution. This makes it the best-performing, corrosion-resistant, and maintenance-free water distribution system in the industry.
ZMII spray nozzles have a 1-1/4" diameter opening and a 1-1/4" transparent splash plate.
Mounted in corrosion-resistant PVC water distribution piping with threaded end caps.
Provides unparalleled heat exchanger coverage and scale prevention.
Stainless Steel Water Basin
Available in type 304 or type 316 stainless steel.
Itedpfxo Ag Id Ts Anwjp
Covers the entire area of the water basin, including the supporting columns and the frame of the louvers.
Welded water basin seams for leak-free operation.
Stainless Steel Housing and Fan
Available in type 304 or type 316 stainless steel.
Covers the entire upper section, including the fan shroud.
Stainless Steel Thermal-Pak II Heat Exchanger
Available in type 304 or type 316 stainless steel.
The stainless steel heat exchanger offers superior resistance to corrosion in harsh environments and is available within EVAPCO's standard delivery time! The EVAPCO 304 STT heat exchanger option can be manufactured as an ASME heat exchanger.
Success:
Your message has been sent.
Listing
Chromowola
1,466 km
Processing line | Jams, juices
Call
Condition: excellent (used), functionality: fully functional, Production lines for fruit and vegetable preserves. A significant portion of the equipment is newer – from 2011 and 2014 – supplemented by older, robust machines that have proven their reliability through years of continuous operation. The machines are sold as a complete line.
Line capacity (based on an example product) – approximately 1200 liter jars/hour (~1.5 tons/hour). This translates to approximately 28,800 jars/day, or ~36 tons/day.
(I) What can be produced on this line:
- Compotes (jars, bottles)
- Jams and thick preserves
- Juices (bottle filling, tube pasteurization)
- Canned goods (sterilization in an autoclave)
- Pasteurized preserves in jars (pickles, vegetables, sauces)
(II) Process flow:
1. Product dosing – into buckets, jars (2 dosing machines)
2. Filling – bottles (filling machine), cans (dosing machine + seamer)
3. Thermal processing – boiling tank, evaporators (juice/puree concentration), tube pasteurizer (liquid product before filling)
4. Packaging closing – sealers (bottles, jars), capping machine
5. Sterilization/pasteurization of finished packaging – autoclave (cans, jars), tunnel pasteurizers (3 units)
6. Labeling – labelers for bottles, jars and cartons
7. Collective packaging – heat tunnels (shrink film), conveyors
(III) Equipment list:
1. Carton labeler
2. Heat tunnel (shrink film)
Itsdpfxoz Daato Anwep
3. Conveyors
4. Heat tunnel
5. Bottle labeler
6. Jar/bottle labeler
7. Heat tunnel x 3
8. Labeler (without control panel)
9. Tunnel pasteurizer x2
10. Dosing machine for buckets
11. Dosing machine + seamer for cans
12. Pleszew Autoclave (2011)
13. Tunnel pasteurizer
14. Dosing machine
15. Capping machine
16. Seamer
17. Bottle filling machine
18. Jar seamer
19. Dosing machine for jars x2
20. Tube pasteurizer
21. Evaporator x3
22. Boiling tank
Total value: 2,380,000 PLN = ~ 545,000 EUR
(IV) Why buy the entire line:
Complete process line – from dosing to collective packaging – without the need to find missing components.
Option for pickup with dismantling and transportation (to be agreed upon).
Equipment used in production – documented history of use.
Flexible sales options: entire line, separate technological units (e.g., canned goods section with autoclave, bottle filling section), or individual machines.
Terms:
Visit possible by prior arrangement.
Transportation and dismantling to be agreed upon.
Success:
Your message has been sent.
Listing
Bydgoszcz
1,411 km
Complete processing line
Tofflon JOYCollagen Powder Production Line
Call
Year of construction: 2023, operating hours: 500 h, condition: like new (used), functionality: fully functional, We offer a complete industrial production line designed for the extraction, purification, concentration and spray drying of collagen derived from fish processing by-products.
The production line is designed to process fish skin and fish bones into collagen powder using controlled enzymatic hydrolysis, mechanical separation, filtration, ion exchange purification, evaporation and spray drying.
The system integrates multiple processing stages into one industrial production solution.
Main Equipment Included
1. Collagen Extraction and Enzymatic Hydrolysis System
3 × stainless steel enzymatic reaction tanks, each with 3,000 L effective capacity
SUS316L product-contact surfaces
Heating jackets, insulation and agitators
Enzyme preparation and acid dosing tanks
Pumps, vibrating screen and intermediate storage tanks
Temperature, level and pH monitoring
Siemens PLC control system
2. Separation System
Industrial decanter centrifuge, model LW350, capacity 2–3 t/h
Disc separator, model BDY311, capacity 2–3 t/h
Stainless steel receiving and storage tanks
Transfer pumps and process control system
3. Purification and Decolorization System
Itsdpfx Ae Ahynvsnwjp
Anion and cation exchange columns
Activated carbon filtration system
Stainless steel plate filtration unit
Regeneration tanks
Heat exchanger and transfer pumps
Automated process control
4. Concentration and Drying System
Double-effect falling film evaporator
Water evaporation capacity: 1,600 kg/h
Concentrate holding tanks
Industrial spray dryer
Spray dryer water evaporation capacity: 150 kg/h
Hot air generation and powder collection system
5. Cleaning and Water Treatment
Automatic CIP cleaning system with 4 × 3,000 L tanks
CIP circulation pumps
Reverse osmosis (RO) water treatment system
Water treatment capacity: 5,000 L/h
Stainless steel process piping and associated equipment
Technical Specifications
Finished product: Fish collagen powder
Nominal production capacity: Approx. 1,000 kg/day
Raw material requirement: Approx. 5–6 tonnes/day
Steam requirement: Approx. 2 tonnes/hour
Electrical power requirement: Approx. 300 kW
Compressed air requirement: Approx. 1 m³/hour
Cooling system: Circulating cooling water
Main process materials: Stainless steel SUS304 / SUS316L
Automation: Siemens PLC and touchscreen control systems
Production Process
Raw material washing → Enzymatic hydrolysis → Filtration → Decanter separation → Disc separation → Ion exchange purification → Activated carbon filtration → Sterilization → Concentration → Spray drying → Powder collection and packaging.
Applications
The production line is intended for industrial processing of fish-derived raw materials into collagen powder.
Potential applications include:
Marine collagen production
Fish processing by-product valorization
Collagen ingredient manufacturing
Food ingredient production
Nutraceutical raw material processing
Final product specifications and suitability for particular applications depend on the selected process parameters, raw material quality and validation.
Additional Information
The system is designed as an integrated industrial processing line, including extraction, separation, purification, concentration, drying, cleaning and water treatment equipment.
Detailed equipment specifications and technical documentation are available upon request.
Success:
Your message has been sent.
Listing
United Kingdom
0 km
Packing System
Comek s.r.l. / PropemaVPB 400 'Bag-in-Bag' Packing System
Call
Year of construction: 2014, condition: excellent (used), functionality: fully functional, Complete 'Bag-in-Bag' forming system, previously used to produce different sized multipacks of crisps.
Isdpfx Aoyvac Asnwjtp
System comprises of:
1 x Feed hopper and steps/gantry.
1 x Comek s.r.l. infeed swan-neck / 'Z' conveyor. Manufacturer – Comek s.r.l.
1 x Comek s.r.l. / Propema VPB 400 vertical form, fill and seal bagging machine. Manufacturer – Comek s.r.l./Propema S.r.l. Date of manufacture – 2014. Sealing jaws - 380mm horizontal & 620mm vertical. Film width - up to 810mm wide.
1 x Markem Imaje SmartDate X65 128mm thermal transfer printer. Manufacturer – Markem-Imaje. Date of manufacture – 2021.
1 x Flash label applicator (never used / required for seller's products).
1 x Hole punch (3mm) to help deflate the multipack bags into large boxes.
1 x Comek s.r.l. outfeed inclined conveyor. Manufacturer – Comek s.r.l. Belt width - 400mm wide. Conveyor length - 1800mm long.
1 x 1.2m diameter stainless-steel Lazy Susan / rotary packing table. Height - 750mm (height-adjustable feet).
This system was producing bulk multipack bags of 3 x different flavours of bags of crisps.
Speed - up to 18 packs/minute.
Footprint of system - 7.3m long x 2.7m wide x 3.5m high (infeed conveyor to lazy susan).
Success:
Your message has been sent.
Listing
Beveren-Kruibeke-Zwijndrecht
693 km
Thermal Oxidizer with Flue Gas Cleaning
DürrEcopure Var 2206
Call
Condition: used, Year of construction: 2021, functionality: fully functional, Dürr Ecopure VAR 2206 Thermal Oxidizer with Flue Gas Cleaning (2021)
For burning liquid and gaseous waste streams including fluorinated gases, e.g. PFAS, and recovery of aqueous hydrogen fluoride
Emissions limits
SO2 ≤ 100 mg/Nm³
NOX ≤ 30 mg/Nm³
CO ≤ 50 mg/Nm³
CF4 ≤ 70 mg/Nm³
HF ≤ 1 mg/Nm³
NH3 ≤ 2 mg/Nm³
Comprising
Direct fired thermal oxidizer
Hot gas cooling and acid recovery
Alkaline wet scrubber
Honeycomb selective catalytic reduction deNOx system
>1M cost spare parts
Direct fired thermal oxidizer
Including 2x natural gas combustion chambers and burners
- High calorific liquid waste requires safe ignition supplemental hydrogen supply for acid formation
- Gaseous waste streams injected via nozzles downstream and close to the burner
- 1.5MW multi-fuel natural gas & liquid waste (minor fuel stream) burner with natural gas capacity up to 200Nm3/h
- 1400C normal, 1540C max allowable temperature destruction of pollutants to reduce emissions with 3.28 MW thermal energy transfer
- 2 seconds minimum residence time in combustion chamber at 1400C
- 1,800mm combustion chamber internal dia.
- Approx 300mm refractory lining
- 2,400mm combustion chamber external dia.
- 12,000mm combustion chamber internal length
- 3.28MW maximum thermal capacity
- 4,900Nm3/h, 60mbar, 14kW combustion air fans
One chamber is active, the other one is on standby and can be prepared, repaired, or maintained.
This allows minimizing shutdown and changeover time to only several days
Wet scrubber hot gas cooling and acid recovery
SGL Carbon Diabon HT-PQ 850 graphite pipe quencher
- 6,000 Nm3/h capacity flow
- 1,100 mm dia.
- 2,000mm high
- pumps
SGL Carbon Diabon THX-RS falling film absorber shell & tube heat exchanger
- 1,100mm dia.
- 4,500mm tube length
- 595 no. tubes
- 22mm tube internal dia.
- Graphite, carbon steel
- pumps
Quench vessel
- PP/FRP
- 1,100mm dia.
- Approx. 6,000mm high
Itjdpfxez Ai Tpj Anwsp
2x Scrubber absorber columns, each
- Shell FRP/PP
- Internals PP
- 1,000mm dia.
- 11,000mm high
- Pumps
- Dosing station
FRP 5m3 Emergency water tank
- 1,600mm dia.
- 3,000mm high
- 3kW heating
2x Teblick 100,000L HDPE hydrofluoric acid tanks (2019)
Honeycomb selective catalytic reduction deNOx system
- 5,900Nm3/h, 130mbar, 42kW induced draft fan
- 320 kW gas/gas heat exchanger
- 500 kW capacity reheat burner
- 1.2m deNOx honeycomb catalyst
Clean gas outflow
Stack with flow & temperature measurement
Spare parts include
- 200 items of sensors, pumps, valves, gaskets, joints etc.
- Graphite quencher
- Falling film absorber
With the redesign and maintenance support of Dürr, the system could also
- be adapted to other halogenated gases with bricks to be selected according to gas application
- cope with the presence of VOCs or contaminated air
- larger volumes with the addition of a small lance for 15kg/h liquid injection
Success:
Your message has been sent.
Listing
Łask
1,541 km
Shrink foil wrapper
Mariani Shrink film wrapperTRM 700-LF-I
Call
Year of construction: 2013, condition: ready for operation (used), Mariani Shrink film wrapper
Model: TRM 700-LF-I
YOM 2013
Including in/outfeed conveyor system
Working width: 700mm
Cardboard Trays – Cases with protective shrinked film
Iodoyilyqepfx Anwotp
Portion packs : 3 x 8 – 3 x 9 – 3 x 10
Family packs : 2 x 6 – 3 x 4
Output: Max 25 trays per min, varying according to the format required
Dimensions machine (LxWxH): 5000x1400x2100mm
Success:
Your message has been sent.
Listing
Ludwigsburg
1,122 km
Pallet wrapper turntable stretching
ATLANTA - 25mm flacher DrehtellerSYNTHESI - 200% Vorreckung
Call
Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23SynthesiLow05, Exhibition machine, like new.
SYNTHESI with a flat turntable
Turntable height 25mm
Short ramp 500mm long
TECHNICAL DETAILS:
Turntable LOW PROFILE
· Height 25mm
· Max. pallet dimensions: 1000 x 1200 mm
· Max. load capacity: 1200 kg
· a ramp included
Wrapping height (pallet included) 2,200 mm
Height query by light button
Frequency-controlled turntable drive (soft start - start/stop)
Frequency controlled carriage speed up/down
Signal tone at the start of wrapping and stop at the end of the cycle
Emergency stop switch according to CE regulations
The turntable always stops in the same starting position
Fall protection for the film slide
Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm
ADJUSTABLE PARAMETERS ON THE CONTROL PANEL
All function parameters can be set via the display
F00 - Screen lock program change
F02 - Infinitely variable turntable speed 5-12 rpm
Iodpfx Anjz Ipwcewotp
Lifting carriage speed can be adjusted up and down independently of each other
F03 - lifting carriage speed up from 1.3 up to 5.4 m/min
F04 - carriage speed down from 1.3 to 5.4 m/min
F05 - Number of wraps on the pallet foot (1 - 10 wraps)
F06 - number of wraps on the pallet head (1 - 10 wraps)
F09 - Winding height photocell delay
F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable
F62 - Ergonomic height for film change
Foil consumption display (optional)
ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL
6 storable winding programs
F01 - 1 - cross winding (up/down)
F01 - 2 - Single wrap (only up or only down)
F01 - 3 - Push button for manual functions
F10 - F11 - Wrap cycle with preset start and stop height
F12 - Winding to a stored height (switching off the light button for the height)
F22 / F23 - Winding cycle for cover sheet film
F29 - Soft start cycle for edge protection application
F30 - F31 - Wrap cycle with gain and adjustable number of wraps
Soft start to reduce film tears on sharp pallet edges
Winding cycle with manual or motorized line formation (optional)
Reinforcement cycle via push button
FILM SLIDE TYPE "OPRS - ONE PRE STRETCH"
Film pre-stretch ratio set to 200%
Foil application tension electronically controlled via control unit
Foil specification Max. outer diameter Ø250mm - height = 500mm - core Ø76mm
Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ
Total power: 1.2KW / 8A
Optional: pinion for OPRS pre-stretching ratio of 150% / 250% / 300% possible
Other systems available from the Ludwigsburg warehouse.
Success:
Your message has been sent.
Listing
Borken
777 km
Skinetta ASK 450 sleeve banding machine, banderoler, packaging machine
SkinettaASK 450
Call
Condition: used, Skinetta ASK 450 Stretch Banding Machine
Purpose of the Machine
The stretch banding machines in the SKINETTA series are designed for tightly wrapping individual or multiple products with polyethylene film. In contrast to shrink wrapping machines, the film is stretched tightly around the packaging before sealing. This tension is the main advantage of this process, reducing film consumption by up to 20%.
A particular advantage of the patented SKINETTA sealing system is the stepless, precise metering.
The film is sealed in a very small area (welded), resulting in a clean seal with minimal overhang. By using a SKINETTAther or SKINETTAshrink hot air hood and a sufficiently wide film, the overhanging film can be reduced laterally. This increases the stability of the container and prevents individual products in correspondingly grouped containers from falling out sideways. With suitable additional devices, a complete closure of the containers can be achieved by sealing, crimping, and folding the sides.
The SKINETTA stretch banding machine program includes six basic models for film widths of 25 to 200 mm, 290 mm, 440 mm, 590 mm, 790 mm, and 1,250 mm.
In addition to the single-lane version, two- to four-lane systems are available to increase production output.
SK series (semi-automatic):
Itsdpfxop U T Ifj Anwsp
In the SK series, the products are manually grouped on the machine table by an operator. The insertion into the film and the subsequent stretch banding process are initiated either via a foot switch or a two-hand control.
A later upgrade to fully automatic operation is possible (except for model SK 200).
ASK series (fully automatic):
In the ASK series, the product feed, grouping, and subsequent banding are fully automatic with the help of appropriate additional devices.
A modular system of feed, grouping, forming, and special components enables individual adaptation to a wide range of customer requirements.
Thanks to more than 20 years of experience, proven standard components can be used for a wide variety of packaging tasks.
Technical data
Machine dimensions (basic machine)
Length: 1670 mm
Width: 980 mm
Height: 1700 mm
Table height: 1700 mm
Weight: 400 kg
Power connection: 400 V
Power consumption: 6.1 kW
Additional equipment: rod chain conveyor
You can find more items – new and used – in our shop! International shipping costs on request!
Success:
Your message has been sent.
Listing
Ludwigsburg
1,122 km
Pallet wrapper turntable stretching
ATLANTA - mit integrierter WaageSYNTHESI - mit Palettenwiegesystem
Call
Year of construction: 2026, operating hours: 1 h, condition: like new (used), functionality: fully functional, machine/vehicle number: S23SynthesiWaage03, Exhibition machine, like new.
SYNTHESI integrated with scale
Pallet weighing system integrated in the machine
FILM SLIDE TYPE “FE” (ELECTROMAGNETIC BRAKE)
Foil application tension electronically controlled via control unit
Foil specification Max. outer diameter Ø250mm - height = 500mm - core Ø76mm
Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ
TECHNICAL DETAILS:
Turntable 1500mm (Optional 1650mm)
Wrapping height (pallet included) 2,200 mm
Height query by light button
Frequency-controlled turntable drive (soft start - start/stop)
Frequency controlled carriage speed up/down
Signal tone at the start of wrapping and stop at the end of the cycle
Emergency stop switch according to CE regulations
The turntable always stops in the same starting position
Fall protection for the film slide
Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm
ADJUSTABLE PARAMETERS ON THE CONTROL PANEL
All function parameters can be set via the display
F00 - Screen lock program change
F02 - Infinitely variable turntable speed 5-12 rpm
Lifting carriage speed can be adjusted up and down independently of each other
F03 - lifting carriage speed up from 1.3 up to 5.4 m/min
F04 - carriage speed down from 1.3 to 5.4 m/min
F05 - Number of wraps on the pallet foot (1 - 10 wraps)
F06 - number of wraps on the pallet head (1 - 10 wraps)
F09 - Winding height photocell delay
F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable
F62 - Ergonomic height for film change
Foil consumption display (optional)
ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL
6 storable winding programs
F01 - 1 - cross winding (up/down)
F01 - 2 - Single wrap (only up or only down)
F01 - 3 - Push button for manual functions
F10 - F11 - Wrap cycle with preset start and stop height
F12 - Winding to a stored height (switching off the light button for the height)
F22 / F23 - Winding cycle for cover sheet film
F29 - Soft start cycle for edge protection application
F30 - F31 - Wrap cycle with gain and adjustable number of wraps
Soft start to reduce film tears on sharp pallet edges
Winding cycle with manual or motorized line formation (optional)
Reinforcement cycle via push button
Itsdpfx Asz Ipdvsnwsp
Other systems available from the Ludwigsburg warehouse.
Success:
Your message has been sent.
Listing
Ludwigsburg
1,122 km
Pallet wrapper turntable stretching
ATLANTA mit einem erhöhtem GrundgestellEVA - für E-Ameise zum unterfahren
Call
Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S22EVA_07, Exhibition machine - like new.
EVA
Turntable / base frame increased / Ø 1,500 mm
Max. pallet dimensions: 800 x 1,200 mm
Max. load capacity: 1,500 kg
Wrapping height (pallet included) 2,200 mm
Raised base frame by 150mm - 200mm, for charging with E-Ant - adjustable
Height query by light button
Frequency-controlled turntable drive (soft start - start/stop)
Frequency controlled carriage speed up/down
Signal tone at the start of wrapping and stop at the end of the cycle
Emergency stop switch according to CE regulations
The turntable always stops in the same starting position
Fall protection for the film slide
Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm
ADJUSTABLE PARAMETERS ON THE CONTROL PANEL
All function parameters can be set via the display
F02 - Infinitely variable turntable speed 5-12 rpm
Itedpfx Ansz Ipr Howop
Lifting carriage speed can be adjusted up and down independently of each other
F03 - lifting carriage speed up from 1.3 up to 5.4 m/min
F04 - carriage speed down from 1.3 to 5.4 m/min
F05 - Number of wraps on the pallet foot (1 - 10 wraps)
F06 - number of wraps on the pallet head (1 - 10 wraps)
F09 - Pallet wrapping height setting
F62 - Ergonomic height for film change
ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL
1 storable wrapping program
F01 - 1 - cross winding (up/down)
F01 - 2 - Single wrap (only up or only down)
F01 - 3 - manual winding
F12 - winding to a stored height (while switching off the light button)
F29 - Soft start cycle for edge protection application
Soft start to reduce film tears on sharp pallet edges
FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE
via manually adjustable brake roller on the foil carriage
Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm
Standard connection values: 230 V - 1L+N+PE - 50 HZ
Total power: 1.2KW / 6A
Other systems are immediately available from stock.
Success:
Your message has been sent.
Listing
Ludwigsburg
1,122 km
Pallet wrapper turntable stretching
ATLANTA - für E-Ameise zum unterfahrenEVA mit einem erhöhtem Grundgestell
Call
Year of construction: 2026, operating hours: 2 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S22EVA_03, Exhibition machine - like new.
EVA
Turntable / base frame increased / Ø 1,500 mm
Max. pallet dimensions: 800 x 1,200 mm
Max. load capacity: 1,500 kg
Wrapping height (pallet included) 2,200 mm
Raised base frame by 150mm - 200mm, for charging with E-Ant - adjustable
Height query by light button
Frequency-controlled turntable drive (soft start - start/stop)
Frequency controlled carriage speed up/down
Signal tone at the start of wrapping and stop at the end of the cycle
Emergency stop switch according to CE regulations
The turntable always stops in the same starting position
Fall protection for the film slide
Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm
ADJUSTABLE PARAMETERS ON THE CONTROL PANEL
All function parameters can be set via the display
F02 - Infinitely variable turntable speed 5-12 rpm
Lifting carriage speed can be adjusted up and down independently of each other
F03 - lifting carriage speed up from 1.3 up to 5.4 m/min
F04 - carriage speed down from 1.3 to 5.4 m/min
F05 - Number of wraps on the pallet foot (1 - 10 wraps)
F06 - number of wraps on the pallet head (1 - 10 wraps)
F09 - Pallet wrapping height setting
F62 - Ergonomic height for film change
ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL
1 storable wrapping program
F01 - 1 - cross winding (up/down)
F01 - 2 - Single wrap (only up or only down)
F01 - 3 - manual winding
Iedpfx Aez Iqnvonwotp
F12 - winding to a stored height (while switching off the light button)
F29 - Soft start cycle for edge protection application
Soft start to reduce film tears on sharp pallet edges
FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE
via manually adjustable brake roller on the foil carriage
Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm
Standard connection values: 230 V - 1L+N+PE - 50 HZ
Total power: 1.2KW / 6A
Other systems are immediately available from stock.
Trust Seal
Dealers certified through Machineseeker

Success:
Your message has been sent.
Listing
Menslage
797 km
Robopac Genesis Futura HS Pallet Winder (2023)
RobopacPalettenwickler
Call
Condition: used, Year of construction: 2023, Overview
This Robopac Genesis Futura HS pallet winder was built in 2023. It has under 500 operating hours - technically close to new.
The rotating ring carries the pre-stretch carriage around the stationary pallet for high throughput without moving the load (see Capacity below). Delivered as a stand-alone unit with integrated roller conveyor, prepared for line integration over Ethernet TCP/IP.
Iodpfxozzz R Ds Anwstp
Technical data
- Manufacturer: Robopac
- Model: Genesis Futura HS
- Year of manufacture: 2023
- Machine type: automatic rotating-ring stretch wrapper (pallet winder)
- Operating hours: less than 500 h
- Capacity: up to 92 pallets/h (13 wraps, H 1,000 mm), 77 pallets/h (17 wraps, H 1,600 mm), 70 pallets/h (19 wraps, H 2,000 mm)
- Pallet size: 800 x 1,200 mm
- Load height: 1,000 - 2,000 mm (incl. pallet)
- Load weight: 100 - 1,200 kg
- Conveyor height: approx. 550 mm; speed 15 m/min
- Machine height: approx. 4,862 mm; hall height from 7,000 mm
- Pre-stretch: SCV-B carriage, electronically adjustable 150 - 400 %
- Stretch film: LDPE / LLDPE, 17 - 23 µm, roll width 500 mm, max. diameter 250 mm, core 76 mm, max. weight 20 kg
- Control: Siemens SIMATIC S7-1200 PLC, Siemens TP700 7" colour touch panel
- Wrapping programs: 15 (expandable to 64), 12 steps/recipe, 4 password-protected access levels
- Power supply: 400 V / 50 Hz, TN-S, control voltage 24 VDC
- Compressed air: 6 bar, dry, oil-free
- Documentation and HMI languages: German / English
Equipment
- High-speed rotating ring: power transfer to the pre-stretch carriage via sliding contacts, Wi-Fi commands
- Integrated roller conveyor with pneumatic pallet lifting station (SMC PL-D)
- Automatic film clamping, cutting and wide-band sealing unit
- Fixed vertical hold-down (top press unit) stabilises the load during wrapping
- Roping device gathers the film web from below
- Photocell for automatic pallet-height reading, plus a pre-scan photocell with 3,800 mm reflector mast
- Inverter-controlled IE3 motors, SEW geared, IP55, FESTO pneumatic components, SICK photocells
- Siemens Scalance S615 VPN / firewall router and Scalance XB005 Ethernet switch, TCP/IP link to up-/downstream machines
- Safety: Reer Safegate SMPO 1803 light curtain, fenced enclosure, dynamic fall protection on the ring
- Operator panel separate from the main switch cabinet, plus remote control unit with emergency stop
- R-Connect remote monitoring hardware: cloud portal for production data and teleservice
- TPM package (centralised lubrication points, maintenance intervals on display), integrated HMI troubleshooting
- Complete documentation on USB stick and in print: operating / maintenance manual, wiring / pneumatic diagrams, spare parts catalogue, layout
Condition
Used - almost as new, no visible production wear. Still installed and under power; inspection in operation on request. Sold without warranty.
Availability
Immediately. Location: Germany. Handed over dismantled and packed (EXW).
Success:
Your message has been sent.
Listing
Ludwigsburg
1,122 km
Mobile Wrapping machin
ATLANTA - mobiler StretchWicklerSFERA Easy FE
Call
Year of construction: 2026, operating hours: 1 h, condition: like new (used), functionality: fully functional, machine/vehicle number: SFERA21Kommission1, Stretch winder ATLANTA SFERA Easy
6 programs can be saved individually
Winding height 2150mm
Mast height 2050 mm (fits through almost every door)
Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm
Manual line formation
Tension of the film can be saved in 4 steps
TECHNICAL DETAILS:
two maintenance-free AGM batteries 12 V - 100 Ah connected in series
160 pallets per charge - charging time: 8 -10 hours
High frequency battery charger with LED indicator
Wrapping height “machine with MAST (pallet included) 2,150 mm
Height query via light button or by entering dimensions on the display
Protective bar for emergency stop of the travel drive
Emergency stop switch according to CE regulations
Itedpfx Anez Inapjwop
Acoustic warning signal and warning light when the machine starts
Fall protection for the film slide
Push button for start & stop
Function of the machine according to CE standards Ø 22 mm
ADJUSTABLE PARAMETERS ON THE CONTROL PANEL:
All function parameters can be set via the display
F00 - Screen lock program change
F02 - Adjustable machine speed around the pallet up to 80 m/min
Lifting carriage speed can be adjusted up and down independently of each other
F03 - lifting carriage speed up from 1.3 up to 5.4 m/min
F04 - carriage speed down from 1.3 to 5.4 m/min
F05 - Number of wraps on the pallet foot (1 - 10 wraps)
F06 - number of wraps on the pallet head (1 - 10 wraps)
F09 - Pallet wrapping height setting
F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable
F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable
F62 - Ergonomic height for film change
Display foil consumption (option for PRS - PS)
ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL:
6 storable wrapping programs for SFERA EASY
F01 - 1 - cross winding (up/down)
F01 - 2 - Single wrap (only up or only down)
F10 - F11 - Wrap cycle with preset start and stop height
F12 - Winding to a stored height (switching off the light button for the height)
F21 - Wrapping cycle for large pallets
F22 / F23 - Winding cycle for cover sheet film
F29 - Soft start cycle for edge protection application
F30 - F31 - Wrap cycle with gain and adjustable number of wraps
Soft start to reduce film tears on sharp pallet edges
Success:
Your message has been sent.
Listing
Ludwigsburg
1,122 km
Pallet wrapper turntable stretching
ATLANTA Freezer -30GradSYNTHESI 200% Vorreckung
Call
Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi11, Stretch Winder Synthesi
Isdpfxsz Iq I Ao Anwjtp
Freezer -30 IP65
TECHNICAL DETAILS
Turntable / base frame / Ø 1500 mm
Max. pallet dimensions: 800 x 1,200 mm
Max. load capacity: 2,000 kg
Wrapping height (pallet included) 2,400 mm
FILM SLIDE TYPE "OPRS - ONE PRE STRETCH"
Film pre-stretch ratio set to 200%
Foil application tension electronically adjustable in the programs in different steps
Height of turntable 75 mm
Height query by light button
Frequency-controlled turntable drive (soft start - start/stop)
Frequency controlled carriage speed up/down
Signal tone at the start of wrapping and stop at the end of the cycle
Emergency stop switch according to CE regulations
The turntable always stops in the same starting position
Fall protection for the film slide
Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm
ADJUSTABLE PARAMETERS ON THE CONTROL PANEL
All function parameters can be set via the display
F00 - Screen lock program change
F02 - Infinitely variable turntable speed 5-12 rpm
Lifting carriage speed can be adjusted up and down independently of each other
F03 - lifting carriage speed up from 1.3 up to 5.4 m/min
F04 - carriage speed down from 1.3 to 5.4 m/min
F05 - Number of wraps on the pallet foot (1 - 10 wraps)
F06 - number of wraps on the pallet head (1 - 10 wraps)
F09 - Winding height photocell delay
F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable
F62 - Ergonomic height for film change
Foil consumption display (optional)
ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL
6 storable winding programs
F01 - 1 - cross winding (up/down)
F01 - 2 - Single wrap (only up or only down)
F01 - 3 - Push button for manual functions
F10 - F11 - Wrap cycle with preset start and stop height
F12 - Winding to a stored height (switching off the light button for the height)
F22 / F23 - Winding cycle for cover sheet film
F29 - Soft start cycle for edge protection application
F30 - F31 - Wrap cycle with gain and adjustable number of wraps
Soft start to reduce film tears on sharp pallet edges
Winding cycle with manual or motorized line formation (optional)
Reinforcement cycle via push button
Optionally possible:
Turntable size up to Ø2600 mm
Mast height up to 3900mm
ramp
mounting frame
Light scanner for black products
cutting device
Etc.
Other systems available from the Ludwigsburg warehouse.
Some images may contain options that are subject to a surcharge.
Illustration similar
Success:
Your message has been sent.
Listing
Ludwigsburg
1,122 km
Mobile Wrapping machin
ATLANTA - mobiler StretchWicklerSFERA Easy Leasing ab 199,€*Monat
Call
Year of construction: 2025, operating hours: 1 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: SFERA21Kommission4, Stretch winder ATLANTA SFERA Easy
6 programs can be saved individually
Winding height 2150mm
Mast height 2050 mm (fits through almost every door)
Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm
GMK (compass) The start and end of the winding is always identical
Manual line formation
Tension of the film can be saved in 4 steps
TECHNICAL DETAILS:
two maintenance-free AGM batteries 12 V - 100 Ah connected in series
160 pallets per charge - charging time: 8 -10 hours
High frequency battery charger with LED indicator
Wrapping height “machine with MAST (pallet included) 2,150 mm
Height query via light button or by entering dimensions on the display
Protective bar for emergency stop of the travel drive
Emergency stop switch according to CE regulations
Acoustic warning signal and warning light when the machine starts
Fall protection for the film slide
Push button for start & stop
Function of the machine according to CE standards Ø 22 mm
ADJUSTABLE PARAMETERS ON THE CONTROL PANEL:
All function parameters can be set via the display
F00 - Screen lock program change
F02 - Adjustable machine speed around the pallet up to 80 m/min
Lifting carriage speed can be adjusted up and down independently of each other
F03 - lifting carriage speed up from 1.3 up to 5.4 m/min
F04 - carriage speed down from 1.3 to 5.4 m/min
F05 - Number of wraps on the pallet foot (1 - 10 wraps)
F06 - number of wraps on the pallet head (1 - 10 wraps)
F09 - Pallet wrapping height setting
F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable
F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable
F62 - Ergonomic height for film change
Display foil consumption (option for PRS - PS)
ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL:
6 storable wrapping programs for SFERA EASY
F01 - 1 - cross winding (up/down)
F01 - 2 - Single wrap (only up or only down)
F10 - F11 - Wrap cycle with preset start and stop height
F12 - Winding to a stored height (switching off the light button for the height)
F21 - Wrapping cycle for large pallets
F22 / F23 - Winding cycle for cover sheet film
F29 - Soft start cycle for edge protection application
F30 - F31 - Wrap cycle with gain and adjustable number of wraps
Iedpfxsz Inave Anwetp
Soft start to reduce film tears on sharp pallet edges
We make it easier for you to find: "falling film evaporators"
You will receive new offers immediately and free of charge via e-mail
You can easily terminate the search request at any time
Used Falling Film Evaporators (2,096)
Search Machineseeker now with more than 200,000 used machines:Browse through the most popular machine descriptions:
This may be of interest to you
















































































































































































































































































































































































































































































