Used Feeding System for sale (10,597)

Year of construction: 2020, condition: new, Feeding for granulate and powder Iodjfmn Ufspfx Addjht

Condition: used, Year of construction: 1986, Technical details: sheet width: 650 mm coil weight: ca. 2 t coil internal diameter: 350 - 570 mm electrics - voltage/frequency: 380/50 V/Hz total power requirement: ca. 1,5 kW weight of the machine ca.: 2,0 t space requirements approx. LxWxH: 1,8 x 3,0 x 1,9 m Ihodpou Icgusfx Addet Coiler with Feeding Device - Sizes of coiler: W:1,20 x D:1,10 x H:1,60m - Roll distance: 0 - 5,5 mm - Rolls turning rate: min.:4,3 rpm, Max.:43 rpm - Rolls dia.: 100 mm - Feeding min.: 1350 mm/min, max.:13500 mm/min - Sizes of feeder: W: 1,30 x D:0,90 x H:1,90m Machine can be demonstrated under power. i.D. *

Year of construction: 2018, condition: used, For sale is a fully functional used screw conveyor with a screw diameter of 50 cm. The device has operated for several months in a line feeding vegetables to a peeler. SCREW CONVEYOR Type PSL.U500/1.8 • Device intended for feeding vegetables into the peeler infeed hopper • Infeed hopper adapted for manual feeding, H=800 mm • U-section trough, 500 mm; Length approx. 2700 mm • Discharge height to peeler infeed approx. 1800 mm • Cleaning port in the lower part of the trough; Operating angle approx. 45° • Bearings mounted outside the working section; Lower shaft sealing with packing • Structure mounted on adjustable feet and wheels • Feeding speed adjustable by frequency inverter, external potentiometer on the control panel • Acid-resistant (stainless steel) control panel mounted according to arrangement • Electrical supply: Power 2.2 kW, ~3x380 VAC, 50Hz Ihodpexnrr Ssfx Addet

Condition: used, machine/vehicle number: 007965, Max. panel width: 1300 mm Max. panel length: 2500 mm Max. panel stack height from the ground: 1600 mm Lifting capacity: 200 Kg Ijdpfow Ic Ryox Addeht Work capacity: 8 Cycles/min Movement system: suction cups.

Condition: good (used), conveyor belt, belt conveyor, transport belt, belt conveyor Iedsvpd Huspfx Addeht -Conveyor system: with sheet metal support -Speed: 2 m/min -Drive: VEM 0.18 kW -Dimensions: see photos -Dimensions: 2540/780/H870 mm -Weight: 168 kg

Condition: excellent (used), Sorting, feeding and capping machine Cap application and screwing station without filling station Fully automatic filling and capping system by feeding a filling unit with filling needle Cap sorter and capper for lids and caps up to Ø 20 mm Mode of operation When the machine is started, the caps and lids aligned in the sorter are fed under the capping and screwing heads using a feed system. Ihodpfx Ajqazcgoddot Cappers include screw cappers for screw caps and lid pushers for stoppers and caps 3 x spiral feed bowls for bottles, stoppers and caps 1 x capping station 1 x cap placement station Container height 55 mm Container diameter 20 mm Cap diameter 20 mm Further items in other sizes - new and used - can be found in our store! International shipping costs on request!

Year of construction: 1987, condition: excellent (used), strip width 160 - 1.050 mm strip thickness 0,4 – 3 mm Iodpfjlilztjx Addoht strip cross section 2.500 mm² reference material (tensile strength) 420 N/mm²

Condition: used, System: used piston diaphragm pump / pump Type: HMD-G-50-500 Flow rate: 40.0 m3/h Pressure: 1,6 MPa Ihjdpfx Aedkdi Teddst

Condition: good (used), Feed: Manufacturer: ALBA Ihodpjlz I R Rjfx Addst Tip: AVS 400 Belt straightening: Manufacturer. George Type: SBK 2 Double straightening and feed line!!! With complete documentation!!

Condition: used, machine/vehicle number: 006622, Max. panel width: 2100 mm Max. panel length: 2850 mm Max. panel stack height from the ground: 2100 mm Ihjdpfxeu T Tt Ts Addst Lifting capacity: 250 Kg Movement system: suction cups.

Condition: used, Feeding technology / feeding system / vibratory feeder / sorting unit / bowl feeder Vibratory bowl, sorting device / screw feeding with vibratory feeder for screwdriving applications Feeding system DEPRAG Type: 0622-P/0.75-1S No.: 1183884 Year: 2011 - 2012 The unit was used for feeding contact pins for electrical connectors. Product dimensions: Ø 4 mm, length 26 mm The pins are stocked in the material hopper; the conveyor belt transfers the pins as required into the bowl feeder. The bowl feeder, equipped with two sorting tracks, delivers the pins to the product turner. The product turner orients the product to the desired position and releases it for further processing. The unit comes from a prototype system. External electrical control is not included and should be provided by a PLC. Without modification, also suitable for automatic and correctly oriented feeding of threaded studs up to M4 x 26. The unit consists of the following components: 1 pc. belt hopper / feeding conveyor DEPRAG Type: B 10 Serial no.: 1178200 Order no: 415050A Year: 2011 Filling volume: 10 liters Belt speed: 100 mm/min Operating voltage: 24 Volt (DC) - Belt surface: profiled - Foldable stainless steel chute Weight: 11 kg 1 pc. bowl feeder vibratory bowl KENDRION Type: OA C006.504101 / OA C006029 / KQF 465 B5 Bowl diameter top: 200 mm Bowl diameter bottom: 100 mm Bowl internal height: approx. 75 mm Sorting track width: approx. 5 to 8 mm - Bowl feeder with two sorting tracks and two product outlets Operating voltage: 230 Volt, 50 Hz. 1 pc. DEPRAG vibratory controller for the bowl feeder Iodpsh Ap Idsfx Addoht Type: SZG Controller 6 Production no.: 35 pcs. FESTO product turner with 180° swivel range - 1 FESTO valve terminal CPV10-GE-MP-8 - 1 FESTO valve terminal CPV10-VI - Special pneumatic components (compressed air supply approx. 6 bar) - 2 pcs. MURR base modules type MVP12 - Complete unit mounted on a steel plate with 4 support feet Dimensions L x W x H: 1150 x 520 x 860 mm Weight: 100 kg Very good condition

Year of construction: 2008, condition: excellent (used), Pesa feeding belt 1,2 m belt conveyor 60 cm Pesa length: 1195 mm belt width: 600 mm Protection class: IP54 3x400 VAC 0,37 kW 0,6 m/s Ijdpfsmf Tkujx Addeht year: 2008 Further articles - new and used - you will find in our store! International shipping costs on request!

Year of construction: 1987, condition: excellent (used), strip width 160 - 1.050 mm Iodpfx Aslil Aujddjht strip thickness 0,4 – 3 mm strip cross section 2.500 mm² reference material (tensile strength) 420 N/mm²

Year of construction: 1989, condition: good (used), machine/vehicle number: 3506, System: piston diaphragm pump Manufacturer: Abel Type: FDG 322 Machine number: 3506 Year of construction: 1989 Performance: 15 m3 Ihsdpfx Adsdkdi Eedjt Pressure: 15 bar Engine: BBC, 11 kW, 50 Hz

Condition: good (used), Pre-stroke: ALBA Type Mvhy 50 Ihodpfelz I Hbjx Addot sheet metal straightening: Georg SKB With complete documentation!

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, We are selling a loading and stacking system from the brand: Wamhoff. Including: a cross-transport carriage in front of the loading system. Including: all transport lines. Including: a Wandres brushing machine. Including: a hook turner for turning the panels 180°. Including: a turning station for turning the panels 90°. Ihjdpfswbzy Uex Addet Including: a cross-transport carriage for feeding Euro and disposable pallets. Images: 1. Cross-transport carriage, Wamhoff, model 2012 (Image 1) 2. Loading system, Wamhoff, cross-version, model 2012 (Images 1 and 2) 3. Operating terminal, Wamhoff (Image 3) 4. Intermediate conveyor with hook turner, Wamhoff, model 2012 (Image 4) 5. Wandres cleaning unit, model 2006 (Image 5) 6. Turning station, Wamhoff, manufactured in 2012 (Figure 6) 7. Stacking system, Wamhoff, manufactured in 2012 (Figures 7 and 8) 8. Layout loading system (Figure 9) 9. Layput stacking system (Figure 10) The machine must be dismantled and loaded by the purchaser.

Condition: used, Strip Processing Line, Decoiler and Straightening Machine Year of manufacture: 1991 Strip width: 50 to 450 mm Sheet thickness with straightener inactive: 6 mm Sheet thickness with straightener active: 2 mm - Very well equipped with feed-in aids Required floor space for the entire line (L x W): approx. 7000 x 3000 mm Total weight: approx. 11 tons Good condition Isdpfxeif Sg So Addoht Straightening Machine HMS Type RS 47-04/1, Machine No. Strip width, nominal: 400 mm Strip width, max. pass-through: max. 455 mm Strip thickness at 400 mm width: max. 1.5 mm (steel) Strip thickness at 400 mm width: max. 2 mm (copper) Speed: max. 40 m/min Number of straightening rolls: 7 Straightening roll diameter: Ø 40 mm Number of pinch rolls: 2 Pinch roll diameter: Ø 80 mm Entry height/pass-through height: 1500 mm - Straightening rolls hardened, ground and hard-chromed, with central support - Pinch rolls hardened, ground and hard-chromed, with hydraulic lifting - Manual straightening roll adjustment - Feed assist with hydraulically extendable tongue and hydraulically adjustable deflection pulley - Adjustable side strip guides - All straightening rolls driven via distribution gearbox and cardan shafts - Both pinch rolls driven via gearbox with cardan shafts - Frequency-controlled drive via geared motors - Straightener opening stroke 250 mm for cleaning or for processing thicker material, lifting by trapezoidal-thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3600 x 2200 x 2200 mm Net weight: approx. 4 tons Decoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Outer coil diameter: max. 1600 mm (with load carriage) Outer coil diameter: max. 2000 mm (without load carriage) Diameter of coil turntable: Ø 1700 mm Coil inner diameter, expansion range: 460–520 mm Coil width, nominal: max. 630 mm Expansion jaw width: 750 mm Height of decoiler drum above base plate: 1500 mm - Decoiler drum driven by hydraulic motor and gear - Pneumatic overrun brake on the decoiler drum (TWINFLEX) - Hydraulic expansion of the decoiler drum, centrally via wedge slider system - Hydraulic pressure arm with hydraulically driven double pendulum roller - Coil loading carriage with 12-ton lifting capacity and 300 mm stroke - Decoiler on elevated travel frame with motorized cross travel drive Transport dimensions (L x W x H): 3500 x 1900 x 2500 mm Net weight: approx. 5 tons Central Hydraulic Power Unit (adjacent) Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2x REXROTH tandem pumps - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1600 x 850 x 1450 mm Net weight: approx. 800 kg Electrical Cabinet (adjacent) - All cable connections via Harting connectors Transport dimensions (L x W x H): 2800 x 500 x 2250 mm Net weight: approx. 800 kg

Year of construction: 2001, condition: used, Fully automatic feeding for finger jointing line Table width max 620 mm Spinfeeder Automatic length sorting 3 lengths Bundle formation 3 x Buffer Packet turner Packet destacking Manual loading Buffer in front of zinc tray with 6 compartments Specification: Wood input length: min. 150 mm max. 600 mm wood cross section: min. 20 x 40 mm max. 80 x 180 Ijdpoh Icimsfx Addsht Capacity: 6 milling tables/ min working height: 960mm Table width: 620 mm Plant width: Plant length: see pictures Plant is immediately available, already dismantled

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: M60I/8629, Offer Number: M60I/8629 Machinetype: feeding system for parts Make: SKAKO Type: LTD100/0234CSSL Constr. year: 2013 dimensions: 820x540x70 capacity: 1 to Ihodpewi Sv Nefx Addjt daylight: 2337 mm Location: Germany

Year of construction: 2009, condition: ready for operation (used), Used piston membrane pump, feeding pump Abel HMD-G-32-0250 Yer of construction: 2009 Capacity: max. 25 m³/h Pressure: 15 bar Iedpfxed Hf I Re Addoht Machine-number: 5100443-1 length: 3300 mm

Condition: excellent (used), strip width: 160 - 1.050 mm strip thickness: 0,4 - 3 mm Ihedjxayy Ijpfx Addot reference material (tensile strength): 420 N/mm² coil weight: max. 7,5 t coil OD: max. 1.600 mm

Condition: used, Feeding technology / Feeding system / Vibratory feeder / Sorting unit / Bowl feeder Vibratory bowl, sorting device / Screw feeding with vibratory feeder for screw technology Feeding system DEPRAG Type: 0611-P/0.75-1S No.: 1183885 Year: 2011 - 2012 The system was used for feeding electrical connector pins. Product dimensions: Ø 4 mm, length 39 mm The pins are preloaded in the material hopper; the feed belt conveys the pins as required into the bowl feeder. From the bowl feeder, the product is transferred via the linear feeder to the product inverter. The product inverter orients the product into the correct position and makes it available for further processing. The unit comes from a prototype system; the external electrical control unit is not present and should be replaced by a PLC. Without modification, for example, suitable for the automatic and properly oriented feeding of threaded pins up to M4 x 40. The unit consists of the following components: 1 piece belt hopper / feed conveyor DEPRAG Type: B 10 Serial no.: 1178201 Order no.: 415050A Year: 2011 Fill volume: 10 liters Belt speed: 100 mm/min. Operating voltage: 24 V (DC) - Belt surface dimpled - Foldable stainless steel chute Weight 11 kg 1 piece bowl feeder KENDRION Type: OA C006.504101 / OA C006029 / KQF 465 B5 Bowl diameter (top): 200 mm Bowl diameter (bottom): 100 mm Bowl internal height: approx. 75 mm Sorting track width: approx. 5 to 8 mm Operating voltage: 230 V, 50 Hz. 1 piece DEPRAG vibratory controller for the bowl feeder Type: SZG Controller 6 Serial no: 35 pieces linear feeder KENDRION Type: WS3B/36 Part no: WSB003,564025 Operating voltage: 230 V, 50 Hz. 1 piece DEPRAG vibratory controller for the linear feeder Type: SZG Controller 6 Serial no: 35 pieces product inverter FESTO with 180° swivel range - 1 piece FESTO valve block CPV10-VI 18200 - Compressed air requirement approx. 6 bar - 1 piece MURR base module type MVP12 - Complete unit mounted on a steel plate with 4 support legs Space requirements (L x W x H): 1150 x 520 x 860 mm Weight: 100 kg Ihjdpfjkpwuuex Addet Very good condition

Condition: excellent (used), strip width: 160 - 1.050 mm strip thickness: 0,4 - 3 mm reference material (tensile strength): 420 N/mm² Ihjdexayynjpfx Addet coil weight: max. 7,5 t coil OD: max. 1.600 mm

Condition: excellent (used), Year of construction: 2011, strip width: 100 - 800 mm strip thickness steel (aluminium): 0,8 - 4 (7) mm reference material (tensile strength): 600 N/mm² coil weight: max. 15 t Iodpfx Aew U R Adsddeht coil OD: max. 2.000 mm year: 2011

Condition: excellent (used), Year of construction: 2011, strip width: 100 - 800 mm Iedpfx Adsw U Rztsdjht strip thickness steel (aluminium): 0,8 - 4 (7) mm reference material (tensile strength): 600 N/mm² coil weight: max. 15 t coil OD: max. 2.000 mm year: 2011