Used Ferromatik 250 for sale (16,993)

Condition: refurbished (used), Year of construction: 2025, Progressive Header Machine SACMA SP.250 4 Dies - Currently being overhauled. Available upon request from HBR srl. The machine will be completely overhauled. Square wedges. Available with the soundproof cabin, Brankamp, ​​and the conveyor belt. New electrical system with inverter and PLC acc. to Ce Standards. Technical information: Number of dies: 4 Heading tonnage: 650 KN Maximum cutoff diam 500N/mm²: 10,5 mm. Max. cutoff length: 85 mm. Kickout stroke die max.: 65 mm. Kickout stroke punch max.: 20 mm. Speed pcs. per minute: 275 Power of main motor: 30 KW Diam. die: 54 mm. Length die: 90 mm. Diam. punche fixed: 45 mm. Length. punche fixed: 100 mm. Net weight: 11.000 kg. Gross weight: 12.600 kg. Iedexrdmijpfx Addjal We look forward to seeing you at HBR srl in Calolziocorte (LC).

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: K500-50739, total length: 14,000 mm, total height: 2,500 mm, total width: 3,600 mm, type of input current: three-phase, product height (max.): 100 mm, product height (min.): 30 mm, product length (min.): 500 mm, product length (max.): 1,800 mm, product width (max.): 1,500 mm, product width (min.): 600 mm, input voltage: 400 V, compressed air connection: 6 bar, input current: 33 A, working height: 900 mm, table width: 1,700 mm, table length: 2,000 mm, passage height: 250 mm, year of last overhaul: 2022, workpiece weight (max.): 100 kg, Equipment: documentation/manual, Dimensions of the entire machine: Width: 3,600 mm Length: 10,600 mm (without feed and deposit areas) Height: = 2,500 mm Working height: 900 + 50 mm Feed rate: 13 - 23 m/min (frequency-controlled) Properties of the PE shrink flat film • Shrink film suitable for the shrink sealing process. (Top and bottom films must be laterally sealable in the tunnel). • Biaxial shrinkage value of approximately 50-60% lengthwise, approximately 40-50% crosswise • Antistatic treatment. • Shrink film with needle perforation. Improves the shrinking process and has higher gas and water vapor permeability. Shrink film to be used Iedpovvlyiefx Addoal • Biaxially shrinking, needle perforated. • Spooled on rolls, sound-tight and with straight edges. Foil thickness: Application: approx. 40 - 60 μm. Film widths: Application: 800 mm, 1100 mm, 2000 mm Roll outer diameter: max. 350 mm Core outer diameter: min. 90 mm Bottom film calculation: Package width + 200-250 mm Top film calculation: Package width + (2 x height) + 200-250 mm Technical component data: Conveyor belts: Infeed conveyor (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. Roller conveyor behind the tunnel (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. KFE standard film wrapping machine: Max. film roll width, top and bottom: 2,100 mm / Package height (passage height): max. 250 mm / max. Film roll diameter: 350 mm Film thickness: approx. 40-60 µm high-quality PE film / Weight: approx. 3,100 kg Side sealing: Sealing bar length: 1,850 mm / Adjustment range: 500 - 1,600 mm / Adjustable feed rate: 13 - 23 m/min. Shrink tunnel ST / lI -1800 -3000 -300: Clear hood opening: 1,860 mm wide / 300 mm high / Hood length: 3,000 mm / Transport length: 3,560 mm Adjustable feed rate: 6 - 23 m/min. The machine can be inspected at the production site.

Condition: used, mileage: 525,000 km, power: 162 kW (220.26 HP), first registration: 04/2018, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 7,100 mm, loading space width: 2,480 mm, loading space height: 2,530 mm, Equipment: ABS, parking heater, soot filter, tail-lift, MAN TGL 12.220 BL 4x2. With box body certified to ISO, box heater, and Dautel tail lift with 1,500 kg capacity. Dimensions: 7.10 x 2.48 x 2.53 m. Wheelbase approx. 4.80 m. Features: Lane departure warning, spoiler, large radio, rear air suspension, cruise control, engine brake, roof hatch, comfort seat, ABS, armrests, immobilizer, RIO telematics, AdBlue, cross member for trailer hitch with air and electric connections, 2 load securing rails, LED lighting in the box body. Ijdpfxsw Hiqle Addsal =====German registration, 1 previous owner===== ====We buy commercial vehicles daily, trade-in possible====

Condition: ready for operation (used), functionality: fully functional, Technical data of the press: Name: Eccentric Press SCHULER Model: PD 63 Press force: 63 t Overall dimensions (L x W x H): 1800 x 1300 x 2500 mm Weight: approx. 4500 kg Table dimensions (L x W): 700 x 550 mm Table opening (L x W): 265 x 265 mm Ram dimensions (L x W): 320 x 300 mm Ram stroke: 135 mm (fixed) Maximum distance between ram and table: 400 mm PLC components: SIEMENS SIMATIC S7-300 Pneumatic components: FESTO Controls: single (foot pedal, two-hand lever), continuous (automatic mode - adjustable time interval 1–99,999 s and repetition count 1–32,000) Special function for setting the lower ram position Automatic machine lubrication Pneumatic actuation and braking Iajdpfew R Tl Tsx Addjl Note: Two identical presses are available (difference only in display size: 7" and 4.3"). If both presses are purchased, the total price is €11,500. Technical documentation is not available. Online PLC programming support is possible. Shipping costs are extra. Urgent sale due to the need for space for new equipment.

Operating hours: 13,800 h, condition: like new (used), functionality: fully functional, ### nNewest automatic horizontal packaging machine Brand: nNewest Product category: Packaging machines Description: The nNewest Automatic Horizontal Packaging Machine is the ideal solution for your packaging needs. With advanced technology and high efficiency, this machine ensures precise and fast packaging processes. Model: NT-250 Technical Specifications: - Voltage: AC 220/50 - Film width: Max. 250mm - Power: 2.4KW - Bag length: 65~190mm or 120~280mm - Bag width: 30~110mm - Product height: Max. 40mm - Film diameter: Max. 320mm - Packaging speed: 60~120 bags/min Iodpfstxl Dwjx Addoal - Machine size: 3770 x 670 x 1450mm - Weight: 480kg Location and collection: - Pickup possible in 14547 Beelitz - Shipping possible for additional shipping costs For further information, please send us an e-mail or contact us via WhatsApp.

Condition: excellent (used), IM Very good condition. Iaedpfexclluox Addol

Condition: new, empty load weight: 360 kg, maximum load weight: 1,640 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 2,545 mm, loading space width: 1,510 mm, loading space height: 400 mm, total length: 1,640 mm, total width: 1,110 mm, total height: 3,810 mm, suspension: steel, tire size: 165R13C 96/94N, construction height: 1,110 mm, Multi-purpose trailer prepared for transporting various types of material. Wheels under the transport surface The transport surface is wider and set higher than in other luggage trailer series, making manual loading and unloading easier. All side walls are removable, so the load can be loaded freely, e.g. with a forklift truck. Underframe made of structural steel, closed profile, bolted. Floor made of high-quality, waterproof and non-slip plywood. Possibility of attaching high welded steel mesh walls. | HIGH LOADER + 250/2 2T | Steel frame | Dimensions of loading area: L: 2.54m W: 1.51m Height of side wall: 0.40m | 8 lashing rings (4 left, 4 right) recessed in the floor | Knott axle with drum brake | Leaf spring suspension | Operating voltage 12V | Spindle parking brake | Front railing | Spare wheel on front wall | Errors, input and advance sales reserved. Iaodpfju R D Skex Addsl

Condition: good (used), Year of construction: 1994, cutting height (max.): 250 mm, saw blade diameter: 400 mm, cutting width (max.): 500 mm, chain width: 540 mm, working height: 250 mm, power: 0.09 kW (0.12 HP), DOUBLE SHAFT CIRCULAR SAW COSTA MOD. LEONE 2/250 2X90 MKW HIGH MM 250 Iaedjq E U Ixjpfx Addel

Condition: excellent (used), Type AKF 6/250 Motor 400 V / 3.0 kW Speed 4500 rpm Cutter Ø 250 mm Cutter holder shaft Ø 40 mm Iajdpfx Adouf E R Iodol Milling width 305 mm Milling depth 80 mm Suction nozzle 80 mm Weight 210 kg

Condition: excellent (used), GRAULE AKF 5/250 Iasdel Sklrepfx Addel EU shipping ~300euro

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, plate width: 250 mm, Equipment: documentation/manual, DMR Seri-Roll (rotary screen printing press for labels) Year: 10/1999 Type: 250/2C Width: 250 mm Maximum unwinder diameter: 700 mm 1 screen printing unit + UV 1 hot-foil stamping unit 1 flatbed die-cutting unit 1 rewinding unit 1 sheet cutting station Ijdpjxdi N Hjfx Addoal Available: September 2025 Condition: Good Availability: Immediate (subject to prior sale)

Condition: ready for operation (used), STAYER SC/250 cap saw, mitre saw Specifications: Iajdpouf Nytjfx Addol * blade diameter - max 250 mm * motor power - approx. 1.0 kW * engine speed - 3,600 rpm * spindle - 30 mm * cutting adjustment +/- 45 degrees * max cutting cross-section - 70x100 mm * weight - about 40 kg * overall dimensions 80 x 45 x 40 cm ( W x D x H ). Additional information: * factory technical and visual condition. * presented photos illustrate the actual state of the object of sale * possibility of switching on and checking the device on site * the price given in the auction does not include VAT

Condition: new, Year of construction: 2024, Our new generation Double Shaft Multi Slitting Machine CML/2/250 has entered the service of our sector... Self-adjusting feed speed according to the cutting height... Ability to install saws of different diameters thanks to the up-and-down movable saw shaft Automatic positioning according to cutting height Adjustable cutting height from 20 mm to 250 mm ----- Our new generation Double Spindle Multiripsaw Machine CML/2/250 has entered the service of our industry... Iaedpsttlamefx Addsl Self-adjusting feed rate according to cutting height... Ability to mount saws of different diameters thanks to the up-down movable saw spindle Automatic positioning possibility according to cutting height Adjustable cutting height from 20 mm to 250 mm

Condition: as good as new (ex-display), End Milling Machine Iodpfx Aorcfumjddjal

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, controller model: Cybelec DNC 1200, bending force (max.): 250 t, working width: 3,550 mm, distance between stands: 3,000 mm, overall weight: 18,500 kg, TECHNICAL DETAILS Press force: 250 t Bending length: 3,550 mm Distance between uprights: 3,000 mm MACHINE DETAILS Controlled axes: y1, y2, x, r, z1, z2, back gauge tilt Iaodpfjx I Ebisx Addel Control unit: Cybelec DNC 1200 Dimensions & weight Footprint (L x W x H): approx. 4,300 x 2,750 x 3,750 mm Machine weight: approx. 18,500 kg EQUIPMENT Two-hand foot switch Lasersafe Fisseler Hydraulic tool clamping top and bottom Die shifting Hydraulic crowning Support arms 1 set of upper and lower tools Safety guard

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 199479, clamping force: 250 kN, screw diameter: 30 mm, Awaiting refurbishment at our headquarters in Northamptonshire is this Arburg 270U 250-170 injection moulding machine. Fitted with a Selogica controller. This machine is the four tie bar variant with good size platens for maximum versatility from a small clamp machine. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest. Iajdpex U Ax Eefx Addsl Please note that the video shown is of a near identical machine previously refurbished by STV Machinery. It’s a good example of what can be expected once this machine is fully refurbished by our team.

Condition: excellent (used), Year of construction: 2012, Large grinder for fresh meat, these models were previously known as Wolfing C250UNI. Excellent condition. With de-gristle unit. Iajdpfxsvvn Ics Addsl

Year of construction: 2005, condition: excellent (used), HYUNDAI-KIA SMART TURN SKT 250MS CNC LATHE MAKE HYUNDAI KIA, MADE IN SOUTH KOREA MODEL SKT 250 MS YEAR 2005 CONTROL FANUC 18 IT SWING OVER BED 620.0 mm SWING OVER CROSS SLIDE 400.0 mm MAX TURNING DIA 410.0 mm MAX WORK LENGTH 700.0 mm TRAVEL X AXIS: 290.0 mm Z AXIS: 750.0 mm B AXIS 700.0 mm RADPI FEEDS X AXIS: 20 m/min Z AXIS: 24 m/min B AXIS 20 m/min SPINDLE SPEED 3,500 RPM SUB SPINDLE SPEED 4,000 RPM Iasdpfx Asp T Ulzjddol SPINDLE NOSE A2-8 SUB SPINDLE NOSE A2-6 SPINDLE POWER 18.5/22 kW SUB SPINDLE POWER 7.5/11 kW BAR DIA 82.0 mm BAR DIA SUB SPINDLE 65.0 mm TURRET 12 STATIONS PLUS C AXIS B AXIS PARTS CHATHCHER TOOL SETTING PROBE SWARF CONVAYOR

Condition: good (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 820 mm, controller manufacturer: Heidenhain, controller model: iTNC530, total height: 2,950 mm, total length: 6,000 mm, total width: 3,800 mm, table width: 900 mm, table length: 3,100 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 18,000 rpm, overall weight: 25,000 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 18,000 rpm, coolant supply: 40 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, X-axis travel: 2500 mm Iaodpfjyac Tlox Addel Y-axis travel: 920 mm Z-axis travel: 820 mm Table size: 3100 x 900 mm Spindle nose: SK/ISO40 Spindle speeds: 20 - 18.000 rpm Toolchanger: 30 pockets Controller: Heidenhain iTNC 530 Featured with: - Chipconveyor - Cooling through spindle 40 Bar - ISO40 tools - Machine manuals Country of origin: Germany Motor power: 35 KW Machine LxWxH: 6000 x 3800 x 2950 mm Machine weight: 25.000 kg

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 1114.3705-24, Used CNC Lathe Make: Boehringer Type: VDF 250Cm Year of Manufacture: 1997 VDF Boehringer 250C The machine has the following features: 1000mm turning length No tailstock Driven tools Special indexing chuck Siemens 840C control system The Boehringer VDF 250Cm is a CNC lathe designed for machining chucked parts. It is characterized by its robust construction and precise machining capabilities. Technical Specifications (Model Year 1997) Working Area: Swing over Bed: 550 mm Swing over Cross Slide: 480 mm X-Axis Travel: 405 mm Z-Axis Travel: 1,099 mm Maximum Turning Length: 1,000 mm (None) Tailstock: Tool Turret: Number of Positions: 12 Tool Holder: VDI 50 DIN 69880 Live Tools: YES Spindle: Spindle Head Size: 8 DIN 55026 Spindle Bore: 103 mm Max. Chuck Diameter: 315 mm Max. Drive Power (50% Duty Cycle): 53 kW Max. Torque: 780 Nm Speed Range: 30–3,000 rpm Feeds: Automatic Feeds: 1–10,000 mm/min Rapid traverse speed: 10 m/min (X and Z axes) Max. feed force: 15 kN Dimensions and weight: Machine dimensions (L × W × H): approx. 5,400 × 3,200 × 2,400 mm Machine weight: approx. 11,000 kg Equipment: Pivoting control panel Hydraulic system from HYDROKRAFT Coolant system with 600 l tank, max. pump pressure 5.5 bar, flow rate 60 l/min, pump power 1.1 kW Chip conveyor with 325 l tank capacity, right-hand discharge 3-jaw power chuck Oil mist extraction Iedpfswlap Asx Addsal Control cabinet with cooling unit and temperature controller from RITTAL Control system: SIEMENS SINUMERIK 840 C Variants and Differences There are various variants of the VDF 250 series, such as the VDF 250 CU, which can be equipped with different control systems (e.g., PHILIPS B2T) and technical specifications. Some models feature driven tools and a tailstock, while others are designed as pure chuck-type lathes without a tailstock. Conclusion The Boehringer VDF 250 Cm is a versatile CNC lathe characterized by its stability and precision. With its robust construction and extensive features, it is ideally suited for machining chucked parts in a variety of production environments.

Condition: excellent (used), Thermo Scientific Heratherm Thermo Scientific Heratherm OMS180 Forced Air Drying Oven – 250 °C Product Description: For sale is a Thermo Scientific Heratherm OMS180 forced air drying oven. The unit comes from laboratory use and is in good used condition. Heating, forced air circulation, and controls are fully functional. Suitable for laboratory, industrial, educational, research, material and sample drying applications. Technical Specifications: Manufacturer: Thermo Scientific Model: Heratherm OMS180 Max. temperature: 250 °C Temperature control: Digital Ijdpox Uxz Aofx Addsal Interior: Stainless steel Forced air operation: Yes Power supply: 230 V / 50–60 Hz Power consumption: approx. 3.06 kW Protection rating: IP20 Weight & Dimensions: External dimensions (W × D × H): approx. 620 × 630 × 800 mm Internal volume: approx. 180 liters Weight: approx. 75 kg Important Note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (See pictures) (Specifications and technical data are subject to change and errors!) If you have any further questions, feel free to contact us by phone.

Condition: refurbished (used), operating hours: 22,000 h, In our stock in Wellingborough, Northamptonshire is this fully refurbished Arburg 420C 1000 – 250 VU injection moulding machine with vertical clamp and injection. Ideal for insert moulding as an operator can easily and ergonomically load inserts. The vertical clamp means inserts are more likely to stay in place. This machine has a 30mm plasticising unit which gives a maximum shot weight of 89 (PS) (g). As you’d expect from us, this machine has been fully refurbished and is now completely fault & leak free. With low lifetime hours of only 23k, it really is in excellent condition throughout. The plasticising unit is holding max pressure throughout the range, the pump is quiet, the platens are in great order and we’ve done great work with the general cosmetics. Machine is now available for a full demonstration as and when required. Refurbished machines undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free with a 3 month (parts only) warranty. Ijdpfx Adsl Tnz Eedoal Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we'll do the rest.

Condition: used, Year of construction: 2007, 106 369-11 bore diameter 3 - 65 mm number of spindles 1 total power requirement 45 kW Ijdpfjwizn Ujx Addoal . Siemens control Simens Sinumerik . weight 45 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), Thermo Scientific Heratherm Iasdpfxex Ugh Ro Addjl Thermo Scientific Heratherm OMS180 Forced Air Drying Oven – 250 °C Product Description: For sale is a Thermo Scientific Heratherm OMS180 forced air drying oven. The unit comes from laboratory use and is in good used condition. Heating, forced air circulation, and controls are fully functional. Suitable for laboratory, industrial, educational, research, material and sample drying applications. Technical Specifications: Manufacturer: Thermo Scientific Model: Heratherm OMS180 Max. temperature: 250 °C Temperature control: Digital Interior: Stainless steel Forced air operation: Yes Power supply: 230 V / 50–60 Hz Power consumption: approx. 3.06 kW Protection rating: IP20 Weight & Dimensions: External dimensions (W × D × H): approx. 620 × 630 × 800 mm Internal volume: approx. 180 liters Weight: approx. 75 kg Important Note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (See pictures) (Specifications and technical data are subject to change and errors!) If you have any further questions, feel free to contact us by phone.

Condition: used, Year of construction: 1999, cutting width 150 mm Iaedjva Nqgjpfx Addel machine weight ab. 300 kg 27468