Used Filling Scales for sale (5,297)

Condition: used, Used Framax glass bottle filling line with capacity approximately 2900 bottles / hour made in 2017 and used for approximately 2500 hours. Equipment includes isobaric bottling machine model Modulblock RFC1-16/16/1-DPS/C and also depalletiser, packer (box former, 24 bottles/box). Kjdpfx Aeyhc Rtoi Hedl Previously used for craft beer and RTD (Ready To Drink) carbonated pre-mixed alcoholic drinks. Equipment list and additional photos available on request.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: nvt, overall weight: 25 kg, Brand new filling machine / filling machine / Dosing machine which can be used for filling liquids, pastes, creams, oils, etc. Suitable for almost all liquids but also thicker substances. At this point you could think of: Shampoos Creams Honey Jam Milk Yogurt Kjdpfxorivv Eo Ai Hjdl Water Alcohol Pesto Disinfection Etc. Very solid machine made from high-quality stainless steel that runs on air and 220v, Plug and Play! Extremely suitable for filling small batches. A very small compressor is enough to get this machine working. This can be supplied if necessary. For this we recommend at least a 12L version. The filling machine has a 500ml cylinder so that it can fill a maximum of 500ml per stroke. By allowing the machine to deliver multiple strokes, a multiple of these is also fine. This also applies to 750ml by giving 2 x 375ml. The smallest stroke is 50ml, everything between 50 and 500ml can be lost in 1 stroke. We also have a model that has a cylinder of 100ml and can therefore fill between 5ml and 100ml per stroke. We would like to inform you further about this. It has a large 25L funnel, and it is also possible to connect the IBC or a 200L barrel to work even faster with large filling quantities. The machine is equipped with a foot pedal and auto mode. In the auto mode, the machine continues to fill continuously and larger quantities can be filled easily and quickly. The speed between fillings can be adjusted. The foot pedal allows you to fill at your own pace. Depending on the operator and number of ML, between 15-25 units per minute can be filled. Which makes this a very fast machine. The machine weighs approximately 15/20kg and can easily be placed on a table. Made entirely from stainless steel, a very high-quality machine. If you have any questions, please email us and we will be happy to help you with this or another machine. We also have a label machine which forms a very good combination with the filling machine. We aim to respond to you within 24 hours. Of course we can also be reached by telephone. We are happy to assist you on working days between 9:00 AM and 5:00 PM

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: NVT, type of input current: DC, warranty duration: 24 months, overall weight: 30 kg, filling weight (max.): 30,000 g, input voltage: 220 V, pressure: 2 bar, tank capacity: 30 l, New filling machine that can be used for filling liquids. This includes: Milk Water Alcohol Disinfectant Etc. A very robust machine that operates on air and 220V, plug and play! Ideally suited for filling small batches. A very small compressor is sufficient to get this machine running. This can also be supplied with the machine. For this, we recommend a minimum 12L version. The filling machine has a 1000ml cylinder, allowing it to fill a maximum of 1000ml per stroke. By having the machine perform multiple strokes, multiples of this amount can also be filled easily. For example, 2500ml can be filled by performing two strokes of 1250ml each. The smallest stroke is 100ml, and any amount between 100 and 1000ml can be filled in a single stroke. We also have models with a cylinder that can fill up to 5000ml per stroke. Kdjdpfx Aiorivxco Hel Equipped with a suction hose, allowing the machine to draw directly from a drum or IBC. The machine is equipped with a foot pedal and an automatic mode. In automatic mode, the machine continuously fills, allowing for easy and quick filling of larger quantities. The foot pedal allows filling at your own pace. Depending on the operator and the amount of milliliters, between 15 and 25 units can be filled per minute. This makes it a very fast machine. The machine weighs approximately 15/20kg and can be easily placed on a table. It is entirely made of stainless steel, making it a very high-quality machine. If you have any questions, please email us, and we will be happy to assist you with this or another machine. We also have a labeling machine that is a very good complement to the filling machine. We strive to respond to you within 24 hours. We are also available by telephone. We are happy to assist you on working days between 08:30 and 17:00.

Condition: used, Year of construction: 2016, Manufacturer : Thimonnier Model : THD 400 Year: 2016 Application: Filling pre-formed pouches or doypacks 4-station rotary turret · Solids & liquids · Atmospheric or vacuum Cycle machine – 4 stations Station 1 – Loading of sachets using a suction arm Station 2 – Opening of sachets (internal forceps + air blast) Station 3 – Filling (solid and liquid dosing) Station 4 – Sealing / closing (atmospheric or vacuum) Product discharge via flat belt conveyor Kdedpjy Tp D Eofx Ai Hsl Pouch sizes Max: 300 × 350 × 80 mm Min: 200 × 250 × 50 mm Other sizes available (requires replacement parts) Speed and dosage 100 kg/h (solid product) 4 to 10 bags/min depending on size Solid dosing: bowl/hopper + weighing unit 0.3–2.5 kg Liquid dosing: flow meter Submersible filling available Supply Electrical: 400 V 3-phase + N + T, 50 Hz, 8 kVA Pneumatic: 6–9 bar, 35 m³/h Water: 1–3 kg/cm², 250 L/h, free return General specifications Dimensions: 311 × 302 × 260 cm Weight: approx. 1,000 kg Material in contact with the product: 316 stainless steel Vacuum pump or venturi (vacuum option) Documentation available Video of workshop tests (on request) Full technical dossier (digital version) Spare parts

Condition: used, This line was filling trays of coleslaw and potato salad. 3 lane machine with 2 x 3 head depositors. Ksdpfeqpd Svsx Ai Hodl

Year of construction: 2022, condition: used, 10 Bin Food Grade Multi Head Filling Machine complete with Loading Hopper with 300kg Capacity, Hopper feeds Bucket Elevate on Machine demand and applies product into Multihead Bins to service Doypack Machines. Can be set up on dual floors (as pictured) or utilise Tower Framework. All Multihead Bins are serviceable and can be cleaned down, PLC Controls allow programming both in Multihead Element but also on the Doypack Machines. (2022). Country of Origin: United Kingdom Kjdpfx Aisy Rzfvs Hjdl Location: These lots are located in Burnham-on-Crouch, Essex, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Offers considered prior to auction

Condition: good (used), Ward Bekker Auger Filler Kodpoy Ax Rgofx Ai Hsdl Stainless frame, 25Kg stainless agitated hopper, 35mm diameter screw, with foot pedal, mobile, 3Ph

Condition: used, Year of construction: 2018, Overview  This fill level and closure inspection machine was manufactured in 2010 by German company KHS. The operation view will be done with the label inspection machine from Indspect. It is designed for checking the fill height, closure and label of full bottles. The machine was running until January 2025 and is now stored in the company. Technical data Capacity: up to 25,000 bph Scope of Delivery  Fill level and closure inspection system | KHS Label inspection system | Indspect Ksdpfxewhw Sge Ai Hsdl

Condition: used, Year of construction: 2025, Overview This fully automatic KEG cleaning and filling system from ATS Wibbing GmbH, built in 2025, is consisting of an external KEG washer (AW 75), a KEG cleaning and filling machine (HRF 101), as well as a complete supply and transport system. The system is designed for the processing of a wide range of KEG formats. With an output of approx. 30–35 KEG/h, the installation is suitable for small and medium-sized breweries or beverage producers. The line is equipped with a Siemens S7-1500 control system and touchscreen HMI, allowing fully automatic operation with guided user interface. The scope includes a complete transport system, supply tanks with dosing and conductivity measurement, as well as all required piping between the machine and media tanks. The system is offered with 2 years manufacturer warranty and is available within approximately 2-3 months. The attached project layout drawing illustrates the complete system arrangement including KEG washer, cleaning/filling machine, conveyor sections, pallet handling aid, supply station, and expansion vessel. Technical Data Manufacturer: ATS Wibbing GmbH Machine Type: Fully automatic KEG cleaning and filling line Main Components: ATS external washer AW 75, ATS cleaning and filling machine HRF 101, Supply and transport system Year of Manufacture: 2025 Availability: approx. 2-3 months Capacity: approx. 30 – 35 KEG/h Suitable KEG Formats: Stainless steel KEGs, Plus-KEGs, Party-KEGs, Containers, Diameter range: 160 – 420 mm, Height range: 280 – 600 mm Control System: Siemens S7-1500 HMI: Touchpanel with operator guidance External Washer AW 75: Indexed pass-through operation, Circulation bath approx. 270 l, Spray pump 2.2 kW, Bag filter with pressure monitoring Cleaning & Filling Machine HRF 101: Stainless steel control cabinet, Fully automatic cleaning and filling process Transport System: Roller conveyor and chain conveyor sections, Complete electrical and sensor equipment, Cable trays included Supply System: 4 stacked tanks (150 l each, 120 l usable volume), 3 tanks with heating, Stainless steel pumps, Temperature control and dry-run protection, Temperature and level indication, 2 conductivity measurement systems with dosing pumps, Complete piping between machine and tanks, Pressure and temperature monitoring for product, CO2, sterile air, and steam, Separate control cabinet Expansion vessel 150 l Pallet handling aid Required Utilities: Sterile air: approx. 3 bar, Working air: approx. 6 bar, CO2: approx. 2–3 bar, Steam: max. 3 bar, Water supply: min. 50°C Warranty: 2 years manufacturer warranty Kdjdpfxsy Rk Igs Ai Hsl

Year of construction: 2020, condition: good (used), approx. 8 - 10 pcs. continuous scales / automatic scales for use in a conveyor system, Mettler Toledo - second-hand - used Price per piece: 2.950.-€ ex site (net), disassembled, packed and loaded! Manufacturer: Mettler Toledo For example (a more detailed list will follow) Item 48 Automatic scale Kdsdpfx Aieq U Rq Hs Hsl Year of manufacture: 2020 Type: C 21 TLW250Corgo Max. 35.000gram Min: 100gram T= - 35.000gr 230V Belt width: approx. 49cm Element width: approx. 55cm Length: 1.07m Terminal / Dísplay: ICS469d-cargo ICS4x9-1 110-240V - 50/60Hz, 300mA Still without pos: Automatic scale Year of manufacture: 2014 Type: ICS469-100 Max. 40.000gram Min: 200gram D= 5gr T= - 40.000gr 230V Still without pos. (hangs under the ceiling): Automatic scale Year of construction: 20? Type: C21 TLW250 Cargo Type: LCC300 Max. 300kg Min: 200gram D= 5gr T= - 40.000gr 230V

Condition: used, Year of construction: 2004, The Tortica Ice Group Family Tub Ice Cream Filler is a high-performance, purpose-built packaging solution engineered for efficient filling of family-size ice cream tubs and multi-serving containers. Designed for artisan creameries and industrial ice cream manufacturers alike, this machine combines precision dosing with gentle product handling to preserve texture and reduce waste. Built with robust stainless-steel construction and hygienic food-grade components, the Tortica filler ensures consistent portion control and maximum uptime. Its intuitive controls and flexible filling range make it ideal for a wide variety of frozen desserts — including ice cream, gelato, sorbet, frozen yogurt, and premium specialty blends. Key Features: - Accurate volumetric or servo dosing for consistent product weight and minimal giveaway - Adjustable fill heights and speeds to accommodate tubs from small family sizes to larger multi-serve formats - Hygienic design with easy-clean sanitary surfaces, CIP compatible components, and sealed guarding - User-friendly interface for quick changeovers and reduced operator training time - Heavy-duty construction suited for continuous production environments - Smooth, low-shear filling preserves ice cream structure and reduces air entrainment - Optional integrations for lid placement, sealing, date coding, and packing conveyors Kdodjynr Axopfx Ai Hjl Whether you’re scaling up production or upgrading your existing line, the Tortica Ice Group Family Tub Filler delivers dependable performance, precise filling accuracy, and the flexibility to support product innovation and seasonal variety offerings. Cup size: 200 x 100 mm (LxW) Granular application: Available Main filling: Available Cap Closing: Available Stations: Cup Dispenser > Filler > Granular Filler > Lid Closing > Outlet Conveyor Condition: Good Available: Immediately

Year of construction: 2006, condition: excellent (used), Dispensing hot food products is normally associated with a number of health and safety risks. These risks are minimized with a fully automated dispensing system. The controls make sure that the operator avoids any direct contact with the 90°C hot product. The automatic bag-packing unit seals the bags once they are filled. Furthermore the need for lifting products over long distances is reduced since the ready packaged dishes are transported from the filling station to the operator via a small conveyer belt. This prevents inappropriate working positions. Kdedpfxeh A Hbxo Ai Hel HOT-FILL DOS 3 ensures uniform portions. The quantity is controlled via the touch- screen display. The display also controls how quickly the product is to be dispensed allowing for flexibility in the workflow. The fully automated HOT-FILL DOS 3 sucks the product directly from the kettle and is fitted with a temperature alarm consistently ensuring the correct temperature of the product.

Condition: used, Year of construction: 2010, This Filling machine has been running supporting a large supermarket Chain for the Greek Yoghurt Type cups from 500 gr to 1000 gr yoghurt. The machine has been maintained very well and will be available for dismantling October 2025 . It can be seen running in production. This consists of cup de nester, cup peroxide, filling, UV on film, Film sealing on roll off , Over lid Cap applicator . Capacity: 2000 cps/hr Filling Type: Piston Filler Filling Volumes : 500-1000 gr Controls: Siemens HMI Cup disinfection: Peroxide Film Disinfection: UV Cup Diameter: 120 mm Film application: Heat sealing and cutting off roll Kdodpjyr Nlfjfx Ai Hel Over cap: Plastic lid after sealing

Condition: used, Microbalance, Laboratory Balance, Precision Balance, Analytical Balance, Scale, Micro Balance METTLER TOLEDO Model XS3DU S/N 1129453969 Part No. 18.11.2.1518.756-1 Year of Manufacture: 2008 Functions: Weighing, Statistics, Formulation, Density, Percentage Weighing, Piece Counting Maximum Capacity: 3.1 g Readability: 0.01 mg Taring Range: 0 … 3.1 g Maximum Capacity (Fine Range): 800 mg Readability (Fine Range): 0.001 mg Repeatability (at nominal load): 6 μg (3 g) Repeatability (fine range at nominal load): 0.8 μg (0.2 g) Linearity Deviation: 10 μg (0.5 g) Corner Load Deviation (test load): 4 μg (1 g) Sensitivity Deviation (test weight): 45 μg (3 g) Temperature Drift of Sensitivity: 0.0001 %/°C Sensitivity Stability: 0.0001 %/a Repeatability (low load): 3 μg (0.2 g) Repeatability, fine range (low load): 0.5 μg (0.2 g) Linearity Deviation: 3 μg (3 g) Corner Load Deviation (test load): 1.2 μg Sensitivity Deviation (test weight): 9 μg (3 g) Minimum Sample Weight (USP): 6 mg Minimum Sample Weight (USP) fine range: 1 mg Minimum Sample Weight (U = 1%, k = 2): 0.6 mg Minimum Sample Weight (U = 1%, k = 2) fine range: 0.1 mg Stabilization Time: 6 s Stabilization Time (fine range): 10 s Interface Update Rate: 23 1/s Draft Shield Diameter: 68 mm Draft Shield Usable Height: 55 mm Kodpfowrtbxox Ai Hodl Weigh Pan Diameter: 25 mm - LCD Touchscreen - RS232C Interface - Printer Type RS-P42 - Tare Function Power Supply: Primary 100 – 240 V AC, 50/60 Hz; Secondary 12 V DC, 2.5 A Terminal/Display Unit Dimensions (L x W x H): 285 x 195 x 80 mm Weighing Cell Dimensions (L x W x H): 288 x 128 x 114 mm Printer Dimensions (L x W x H): 210 x 150 x 90 mm Total Weight: approx. 7 kg Good condition

Condition: used, Electronic crane scale MWT type 142 Make No.: 142571 Year of construction 1993 Tensile force measuring device, crane scale Measuring range: 2.500 to 80.000 kg Smallest measured value: 20 kg Power supply via 12 Volt accumulator - Suspension shackle for double hook, anchor hook - Operation, storage of measured values and tare via remote control Kdjdpfx Aiog D H Ris Hsl - Memory for measured values (weights) - Printer for measured values very massive and high quality body made of steel own weight: approx. 200 kg

Condition: good (used), Cartridge holder with shut-off valve Application: Butyl extruder Weight: 2.6 kg Kdjdpfx Aioy Tk Tno Hsl

Year of construction: 2016, condition: used, Trepko 9104-2 FFS Line + Freemantle S09 (2016) Trepko 9104-2 Form–Fill–Seal Cup Packaging Line (2016) with T. Freemantle S09 Wrapper This complete Form–Fill–Seal (FFS) production line from 2016 is engineered for high-capacity manufacturing of thermoformed cup products. The main unit, Trepko 9104-2, forms cups from roll-fed plastic material, fills them with viscous food products, seals with PET/EVOH lids, cuts multipacks, and discharges them for further downstream handling. Included with the line is a T. Freemantle S09 wrap-around packer from 2016 for grouping and wrapping finished multipacks. The line is ideal for yoghurt, dairy desserts, processed cheese, margarine/spreads, pâté, and other pumpable or semi-solid food products. Key Features - Complete FFS system: forming, filling, sealing, cutting, and discharge - Designed for 125 g cups (available formats: 4-pack and 8-pack) - Fully automatic, continuous operation - Hygienic, stainless-steel construction - Suitable for chilled and ambient food products - Includes T. Freemantle S09 wrapper/packer for downstream grouping - Supplied with documentation and manuals TREPKO 9104-2 – Technical Highlights Cup Forming - Thermoforming from PS/EVOH/PE roll material - Max film width: 740 mm - Max roll diameter: 1000 mm - Heavy-duty forming tools for 125 g round cups - Multi-cavity arrangement for high throughput Filling System Kdodex Eldxepfx Ai Hel - Stainless steel volumetric dosing block - Multi-nozzle configuration for accurate filling - Suitable for viscous food products - CIP-compatible design Sealing - Lidding material: PET/EVOH, width 240 mm - Heated sealing station for hermetic seals - Precise lid positioning and temperature control Cutting & Discharge - Automatic multipack cutting - Supports 4-cup and 8-cup retail pack formats - Smooth discharge conveyor for integration with wrapping or case packing T. Freemantle S09 Wrapping Unit (2016) - For grouping and wrapping cup multipacks or blocks - Film-fed automatic folder/wrapper - Adjustable for various package dimensions - Stainless-steel construction, CE marked - Compact, reliable downstream solution Applications - Stirred yoghurt - Sour cream / dairy desserts - Processed cheese spreads - Margarine, butter portions, vegetable fat spreads - Dips, pâté, paste-type products - Any pumpable or semi-viscous food requiring thermoformed cups Technical Information - Trepko Model: 9104-2 - Machine No.: 3859 - Year: 2016 - Voltage: 415 V / 50 Hz - Freemantle S09 Year: 2016 - Voltage: 240 V - Full documentation available. Condition The line is in very good used condition, complete with all major forming, filling, and sealing components, stainless-steel safety enclosures, and electrical cabinets. Well maintained and previously used for yoghurt production in a European dairy facility.

Year of construction: 2011, condition: as good as new (ex-display), machine/vehicle number: 10.000 Ltr, Tank & Environmental Protection Wozniack – Specialist Company according to the Water Resources Act Dear Sir or Madam, We offer a 10,000-liter double-walled storage tank for diesel fuel storage as follows: Nominal capacity: 10 m³ Quantity: 1 Used, but fully overhauled, meaning the tank has been cleaned, refurbished, primed, and painted. Color: RAL... according to your wishes. Material: Steel in steel, material S235JRG2 Documents: Manufacturer's certificate/test certificate according to DIN 6616 D/2 and type plate Shape: Cylindrical, lying horizontally on 2 welded saddle supports (Ground clearance approx. 100 mm) Monitoring space of the double wall filled with leak detection fluid. Tank dimensions: Length: approx. 5,350 mm plus 600 mm for the diesel pump Diameter: approx. 1,600 mm Weight: approx. 2,000 kg Equipment/fittings: Dome 500 mm with dome cover, screws, and seal - Filling pipe 2" with TW closure (filling cap) (from 20 m³ = 3") - Suction pipe 1¼" - Dipstick and dipstick closure – tank content indicator - Vent pipe with cap 1 ½" - Limit value sensor with type approval - Leak detection device (optical) = LAS with leak detection fluid - Access ladder for side mounting, supplied separately Kdsdpfx Ascl Sb Rji Hol Tank approved for locations outside earthquake/flood zones. Diesel fuel dispenser with data acquisition Type HDM80eco LTE 75 l/min Cloud-based basic module free of charge You can see who, when, where, and how much fuel has been dispensed. Fueling is done via tank key or PIN entry. Filling area/fueling station Type KAP system, galvanized Area with ramps (mm): approx. 2,650 x 5,300 Area without ramps (mm): approx. 2,500 x 5,000 Trough height (mm): approx. 60 - Nationwide general building supervisory approval - Approved: Installation outdoors and in buildings (For outdoor installation with folding cover and passing pipes) - 2 catch basins, each with 150 l volume ===== Top offer: Liquid fertilizer – AHL tank systems in sizes from 10,000 to 100,000 liters. Of course, you can also help design your tank system! All our systems are extensively inspected and checked by selected employees in our company. We also offer cost-effective delivery on request. You can visit our systems at any time. Further tank systems for above-ground and underground storage are available in all sizes and are for sale on our premises. Have we convinced you of our offer? If you have any questions or requests, simply call us, and one of our experienced employees will be happy to advise you. Price/shipping The price for the fuel station applies ex works Warstein, unloaded. Delivery can be offered at a reasonable price for an additional charge. Delivery time: by arrangement You will receive an invoice with VAT shown. In addition, we purchase existing tank systems and can, as an approved specialist company according to the Water Resources Act (WHG), professionally empty, clean, dismantle, and transport them. Sincerely, from Warstein Tank & Environmental Protection Wozniack

Condition: new, Product driven flow divider The filling flow divider can be used for several kind of products like meat, fish, pasta products, sauces and salads. Kdodpey Hif Nofx Ai Hel Includes 1 nozzle per exit (round, square, triangular or rectangular) with a maximum outer diameter of 40 mm Product temperature up to ± 80 °C With universal connection With pneumatique knife 3 exits belt width 25 cm With support frame in height adjustable New

Condition: new, functionality: fully functional, Our state-of-the-art automatic tube filling machine is a versatile all-rounder, specifically designed to optimally support companies with the highest quality requirements. Thanks to its superior build quality and wide application range, it offers intuitive operation to efficiently and reliably optimise your tube filling processes. Powerful drives and a user-friendly colour touchscreen control system enable maximum flexibility for format and product changes, greatly simplifying your tube filling operations. The machine features memory slots for rapid and reproducible setting of all relevant machine parameters. If you are looking to optimise your tube filling processes with strong production performance while maintaining high quality, Impuls Packaging is your ideal partner. System Overview Parameters: Power supply: AC 220V / 50Hz or 110V / 60Hz Kdedpfx Aijyq Hgke Hjl Power: 4 kW Filling range ● 2–5 ml ● 5–30 ml ● 10–140 ml ● 30–300 ml (customisable) Tube diameter: 10–50 mm (customisable) Tube length: 30–250 mm (customisable) Hopper volume: 50 L Filling accuracy: ±1 % Capacity: 40–60 tubes/minute Machine dimensions: 2050 × 900 × 1900 mm Net weight: 850 kg

Condition: excellent (used), functionality: fully functional, 12 x Mettler-Toledo GmbH 6 kg platform scale. Model - BBA449check+-A6. Kdsdpoy Hkzxsfx Ai Hjl Maximum weighing capacity - 6 kg.

Condition: refurbished (used), Benhil 8358 & 8535 Butter Portion Packer with twin filling/ /Stainless steel hopper / 90 degrees Paper Feed / Capacity Up to 510 pcs per minute Benhil 8358 Twin Filling Butter Portion Packer Stations : Paper feed, paper splitting, Paper forming box, Filling , Wrapping, Pressing, outfeed conveyor, semi automatic rotary case Packer . Capacity : 420 -510 pcs per minute depending on Product weight. Fully Refurbished 12 months ago spent over € 200.000 Key Features: - Portion Control: Benhil packing machines are designed to package butter in accurate, portion-controlled sizes, which is essential for food service operations. - Flexible Options: They often accommodate different types of butter packaging, including mini portions or larger units, catering to various market needs. - Automation: Many of these machines feature automated systems for filling, sealing, and labeling, which helps to increase efficiency and reduce manual labor. - Integration: They can typically integrate with other food processing equipment in a production line, such as mixers or chillers. - Customization: Options for customization may be available based on output requirements, packaging materials, and specific market needs. Kodpfx Aox H Iafsi Hedl Technical Aspects: - Speed: The packaging speed can vary depending on the specific machine model, with some machines capable of filling hundreds to thousands of units per hour. - Ease of Cleaning: The machines are designed for easy disassembly and cleaning, complying with food safety standards. - Energy Efficiency: Modern Benhil machines may focus on energy efficiency, reducing operational costs. - Durability: Built to withstand high volume production environments, they are made from high-quality stainless steel and other durable materials. Applications: - Food Service: Used in restaurants, hotels, and catering services for packaging butter portions for table use. - Retail: Often used for packaging butter for supermarket sales in portioned formats. Paper feed: 90 degree Hopper: Stainless steel Guards: Electro Guards Case Packing: 5 x 8 x 5 pcs 200 per box Capacity: 420-510 pcs per minute Case Packer: Included Filling Volume: 6 - 20 grams Condition: Fully refurbished 12 months ago Latest Production: 2 months ago Electrical Requirements: 3 phase 400 v/50 and 60 hz USA ELECTRICAL REQUIREMENTS: Available upon request Available: Immediately Case Packer Model : 8342

Year of construction: 1999, condition: used, The Ilpra FS 5000 is equipped with twin stages of all stations, the filling heads are built to fill various products ie. Yoghurt, Cream, Sauces, Milk, Fruit pieces of 1 cm, Custard, Etc. The easy maintenance makes these machines highly recommended in production floors keeping productivity at a steady pace. Ilpra cup fillers are mainly driven by a main motor and signals for the air cylinders to take action on each station. The filling volumes depend on the clients needs, therefor these have a standard filling volume of 50-500 ml per cup, we can enlarge the filling volume by increasing the diameter of the filling cylinder on request. Cup Diameter: 95 mm Outside diameter Filling Range: 50-500 grams Capacity: 4800 cups/Hour Stations: Cup Dispenser -> Filling -> Aluminium Lid Applicator -> Sealing -> Date Stamping -> Out-feed Conveyor Guarding: Fully Enclosed Cabin Control Panle: Simple Push button Controls Kedpfx Aijxyh R Ue Hedl Air Requirements: 6 Bar Pressure Electrical Requirements: 400 v / 3 phase / 50 -60 hz Filling Type: Piston Volumetric Filling Hopper: Included Condition: Good Condition Serviced

Condition: used, This listing is for the Minebea Intec Combics 3 Scales Kdedpfxjylnybe Ai Hol The unit is in full working condition and is ready for immediate use Key Features of Combics 3 Display & Interface High-contrast graphic display, backlit for good visibility. Softkey-supported application packages and menus. Integrated traffic light indicators (red/yellow/green) for control applications. Functionality & Applications Combics 3 provides extensive weighing functions, including: Classification and sorting by weight Counting Fill-quantity control and dosing Formulation and statistical processes With the appropriate software, it also supports percentage weighing, gross/net/tare processes, and other advanced weighing operations. Connectivity & Interfaces Multiple data interfaces such as RS232, RS485/422, analogue 4-20 mA, Profibus DP, and Ethernet TCP/IP for integration into production systems. Robustness & Construction Designed for industrial environments with stainless-steel housing and high protection ratings (e.g., IP44 up to IP69K depending on configuration). Typical Use Cases The Combics 3 indicator is suitable for industries like food, pharmaceutical, chemical, metal, and electrical manufacturing — anywhere precise and configurable weighing with advanced control and reporting is needed. How It Fits Into Combics Scales Combics scales are modular systems: a weighing platform (bench or floor) is paired with an indicator like Combics 3 to form a complete weighing solution. The platform’s range can span from small 3 kg units up to heavy 3 t systems. If you want, I can also explain the differences between Combics 1, Combics 2, and Combics 3 indicators in more detail.

Condition: ready for operation (used), Year of construction: 2006, Twelve dosing systems with volumetric progressive cavity pumps ViscoTec (Z and L versions) with collection hopper are available. Dosing volume range: 7.5ml/rev, flow rate range: 75ml/min-937.5ml/min, dosing accuracy: +/-1%, max. speed: 125rpm, max. dosing pressure: 30bar, max. inlet pressure: 10bar. Documentation available. An on-site inspection is possible. Ksdpfxoy S A N Ss Ai Hedl