Used Final Concept 350 for sale (12,910)

Condition: used, Lifting jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, lifting jack thread -Load racks: 6 pieces, 450 mm height -Base plate: 450 x 350 x 20 mm -Shäkel plate: 146 x 146 mm, M42 2 pieces with shäkel Hedpfxsgtu Uqo Aacow -Price: complete -Dimensions: 450/350 / H450 mm -Weight: 60 kg / pc.

Year of construction: 2004, condition: used, Sealpac 350 Traysealer - Hsdpfxehquh Hj Aacjw

Condition: new, Year of construction: 2023, operating hours: 153 h, functionality: fully functional, machine/vehicle number: 258678, clamping force: 3,500 kN, screw diameter: 70 mm, displacement volume: 1,193 cm³, injection pressure: 2,000 bar, mold height (min.): 450 mm, ejector stroke: 250 mm, opening stroke: 1,009 mm, plate width: 1,300 mm, plate height: 1,100 mm, total length: 9,200 mm, total width: 2,500 mm, overall weight: 27 kg, heating capacity: 29.4 kW (39.97 HP), pressure: 2,000 bar, number of injections: 1, power: 186 kW (252.89 HP), Equipment: documentation/manual, Engel e-victory 2440/350, Year of manufacture: 2023, Clamping force: 350 tons, tie-barless, servo-hydraulic, electric injection and plasticizing, Max. shot volume: 1193 ccm, Max. specific injection pressure: 2000 bar, Operating hours: 153, Screw diameter: 70 mm, Control panel: CC300, Medical version, stainless steel covers, medical-grade machine paint, nickel-plated clamping plates, HLI safety door on the operator side, 1x core pull electrically pre-wired, Engel-Flomo on movable platen (operator and non-operator sides) as well as on the injection side rear of the machine, plus many extras. Hjdpow Rfypjfx Aacjw Included: Viper 40 handling device, 30 kg load capacity, and transfer box. The system is being sold on behalf of a customer. The machine has never been in production and is essentially as new. The original price was €629,000. The system is connected to power and can be inspected at any time by appointment.

Year of construction: 1980, condition: repair required (used), Planing width: 35 cm Max planing height 21 cm Engine tank for the milling machine! Hjdpfx Aoh Tx Aweacjw The rest works Machine for review

Condition: good (used), Steady rests and puller for a WMW cylindrical grinding machine with a center height of 175 mm 1 x fixed steady rest, inner diameter 220 mm 3 x fixed steady rests Hodpfx Aswg Rx Deacow 1 x puller with diamond dresser and fine adjustment Only available as a package deal! Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Year of construction: 2012, condition: excellent (used), WALTER WD 250/350 30 and 37 kW shaft multisaw – Polish production – year of manufacture 2012 – DTR and CE TECHNICAL PARAMETERS: cutting height 170 mm cutting width 350 mm spindle diameter 2 x 70 mm diameter of circular saw blades 300 mm spindle motor 30 kW and 37 kW feed motor 1.5 kW seven lower pulling rollers two upper toothed pulling shafts length of the feeding table 3000 mm spigot diameter belt collecting waste from under the machine 2 x 200 mm dimensions (length / width / height) 320 / 200 / 200 cm weight 2000 kg Hjdemv Elpspfx Aacow

Condition: good (used), T-slot plate, clamping plate with dovetail slots, plate field, welding table, welding table -Intermediate plate: for hydraulic press eccentric press -Opening: 150 x 100 mm -Groove width: 18 mm -Hole spacing: 200 x 250 mm, Ø 14 mm -Dimensions: 480/350/H60 mm -Weight: 66 kg Hedpemydncefx Aacew

Condition: excellent (used), Year of construction: 2003, operating hours: 87,861 h, clamping force: 1,000 kN, screw diameter: 30 mm, clearance between the columns: 470 mm, displacement volume: 123 cm³, injection pressure: 2,835 bar, injection weight: 112 g, mold height (min.): 250 mm, Battenfeld HM 1000/350 injection molding machine (237) Number: 237 Availability: in stock Year of production: 2003 Producer: Battenfeld Injection molding machine condition:used Screw diameter [mm]:30 Injection weight [g]:112 Injection pressure [bar]:2835 Column spacing [mm]:470 x 420 Plate size [mm]: 680 x 663 Min. mold height [mm]:250 Control type: Unilog B4 Tongue: german Installed power [kW]:28.9 Working hours [h]: 87861 Weight [kg]: 4500 Dimensions [mm]: 4300 x 1000 Feed hopper: NO Robot socket: Yes Core string: 1x Air valve: 2x Hsdpjwyukqjfx Aacow

Condition: used, Year of construction: 2001, Clamping force: 350 t Platten dimensions: 1040 x 950 mm Distance between tie bars: 710 x 630 mm Screw diameter: 50 mm Shot weight: 400 g Shot volume: 442 cm3 -2 core pullers -2 air valves, controllable hot runners: 1-16 chanel -1 kaskade Type: Horizontal Hodpfx Aaova Ht Socew Drive: Hydraulic

Year of construction: 2003, condition: excellent (used), SEALPAC 350 ID.NO. 2435 Sealpac 350 thread sealer vacuum / gas machine year mod 1999. Very nice condition little used since new! Tool dimensions 530 x 325 mm (Halfgastro) Hedpfoixqmnjx Aacow Dimensions 400 x 75 cm H 180 cm.

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Out-side rollers way (on gound) to in-feed pile of panels to the Loader Hsdpfxjfi Tg Ho Aacjw Out-side motorized rollers table (which receives panels from the Loader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 30

Condition: new, ELMAG Stone cutting machine (incl. slide) STM 600/350, 230 Volt STM 610/350 The impressive stone cutting machines deserve a closer look due to their robustness, perfect handling and, last but not least, a very good price/performance ratio. It simply cuts everything: tiles, exposed aggregate concrete slabs, paving stones, marble and granite, bricks, clinker, artificial stone ... Ideal for construction companies, gardening firms and pavers. ADVANTAGES Lockable spring tensioner for resetting in two saddle bearings S1 water pump Disc cooling with metering valve Powerful drive motor 2.2 kW / 230 V Safety switch with zero-voltage release Long service life: roller table steel rollers above water Precise: Adjustable longitudinal stop, measuring scale Unsurpassed cutting unit for very large cutting depth in reverse cut. Includes segmented diamond blade for universal use TECHNICAL DATA Cutting capacity depth/length 105 / 600 mm Diamond blade Ø 350 mm Diamond blade bore 25.4 mm Hjdjt Hvlgjpfx Aacew Rated power 2.2 kW Voltage/frequency 230/50 V/Hz Dimensions 1130x570x1600 mm Weight 72 kg

Condition: new, Year of construction: 2025, The track chain links for multi-blade saws are cast from high-quality cast iron or steel castings, ensuring the superior quality of the finished tracks. The links can be equipped with additional carrier spikes. The track components—guides, pins, and bushings—are made from high-grade materials and undergo heat treatment and thermo-chemical processing. The feed accuracy of the track is achieved by a special machining method for the holes in the links. Upon request, we manufacture guides, breakers, sprockets, pulleys, and shafts. We design and produce tracks for multi-blade saws from all over the world, for manufacturers such as: A.COSTA, RAIMANN, TOS SVITAVA, REMA RESZEL, GABIANNI, PAUL, OGAM, and all models of Chinese tracks. Hjdpfx Ajwvp Ddjacsw

Condition: excellent (used), Year of construction: 2012, Battenfeld HM 110/350 injection molding machine Year of manufacture :2012 Control : Unilog B6 E Hsdou U Ar Ispfx Aacjw Injection unit: Screw diameter: 35 mm Injection pressure: 2083 bar Injection volume: 169 ccm Injection volume: 153 g Closing unit : Closing force : 1100 kN Distance between columns : 470 x 420 mm Mold height min: 275 mm Opening : 500 mm Mould height max : 775 mm Ejector stroke: 150 mm General information: Machine dimensions (m) LxWxH: 4.0 x 1.5 x 2.1 m Weight : 4,500 kg Equipment: - The machine is in very good condition and has 35,000 hours of operation. - Bimetallic system - 1 x pneumatic valve - 1 x pulling core - Interface for the robot in accordance with EUROMAP 67

Condition: excellent (used), 15 kW engine Inlet 35 cm Outlet 35 cm Hsdpfx Aaemv Hzkecsw 10300 m3/h

Condition: excellent (used), 1.- Faceplate size..... Ø350 mm 2.- Centre bore ..... Ø52H7 3.- Plate height (Vertical axis) ..... 300 mm 4.- Centre height (Horizontal axis)..... 300 mm 5.- Overall height ..... 450 mm 6.- "T" slot width ..... Central 12H7//Rest 12H10 7.- Clamping system in both axes ..... Hydraulic 8.- Load capacity (centred in plate): * Vertical axis (Horizontal plate)..... 200 Kg * Horizontal axis (Vertical plate)..... 200 Kg * With tailstock..... 300 Kg 9.- Rotating axis allowable torque (70- 90/1-R)..... 1.400 Nm 10.- Tilting axis allowable torque (70- 90/1-R)..... 1.400 Nm 11.- Resolution in both axes..... 0,001º Hsdpfx Aaohq Un Njcow 12.- Rotating axis transmission ratio ..... 180/1 13.- Tilting axis transmission ratio ..... 180/1 14.- Rotating axis indexing accuracy (Heidenhain ROD285C) ... ± 7 sec. 15.- Tilting axis indexing accuracy (Heidenhain ROD285C) ..... ± 7 sec. 16.- Rotating axis clamping pressure..... 50 BAR 17.- Tilting axis clamping pressure..... 80 BAR 18.- Rotating axis clamping torque..... 1.200 Nm 19.- Tilting axis clamping torque..... 2.800 Nm 20.- Rotating axis motor speed ..... 2.000 rpm 21.- Tilting axis motor speed ..... 2.000 rpm 22.- Rotating axis speed..... 22,22 rpm 23.- Tilting axis speed ..... 22,22 rpm 24.- Rotating axis recommended motor torque..... 8 ¸ 12 Nm 25.- Tilting axis recommended motor torque..... 12 ¸ 18 Nm 26.- Rotating axis max. transmissible torque ..... 430 ¸ 645 Nm 27.- Tilting axis max. transmissible torque ..... 645 ¸ 970 Nm 28.- Weight (approx.- without motors)..... 600 Kg NOTE: PRICE INCLUDES ROTARY TABLE + 2 ENCODERS + 2 MOTORS

Condition: new, Year of construction: 2022, functionality: fully functional, cooling capacity: 320 kW (435.08 HP), type of input current: three-phase, overall weight: 3,843 kg, ambient temperature (max.): 40 °C, ambient temperature (min.): -25 °C, input voltage: 400 V, volume flow: 55 m³/h, total width: 2,210 mm, total length: 4,600 mm, total height: 2,500 mm, noise level: 65 dB, protection type (IP code): IP54, input frequency: 50 Hz, HITEMA INTERNATIONAL CHILLER TFVF.350 FREE COOLING CAPACITY 320KW ATTENTION: > R-1234ze refrigerant type > This refrigerant is classified in group 2 'non-hazardous' according to the criteria of the Pressure Equipment Directive (PED) 97/23 / EC and 2014/68 / EC. According to IS0-817, the R-1234ze is classified in the A2L security group > Local codes the construction and safety standards must be respected > In the absence of local codes and standards, consult the guide to EN-378 (2017) (safety requirements for substances classified as A2L) or IS0- 5149 (2014) (for substances classified as A2L) > It is the responsibility of the installer to obtain approval from the local construction authorities Hedpfx Aasv Rmdrjcew

Condition: excellent (used), MRS 350 multi-saw - feed band width 35cm Hjdsp Audxepfx Aacew - max. cutting height 13cm - main engine 37kW - smooth adjustment of feed speed - max. saw size 400mm

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 8046723D038, spindle motor power: 11,000 W, turning diameter over cross slide: 380 mm, spindle speed (max.): 3,000 rpm, overall weight: 2,000 kg, type of input current: three-phase, total width: 1,800 mm, total length: 2,500 mm, total height: 1,800 mm, torque: 373 Nm, Equipment: documentation/manual, CNC LATHE STYLE 350 [850 dbc] - main spindle motor power 11kW - main spindle bore Ø54 mm, 3,000 rpm - manual universal with 3 jaws D200mm - VDI30 turret with 8 positions - Coolant gun, including high-pressure pump - Work area lighting (LED) - Cooling system Hodpfx Ajvvwbloacow - Automatic lubrication - Ball screw protection - Full fairing with sliding doors - Speed potentiometer - Coolant control button - Handwheel - Remote support on machine – allows remote diagnostics

Condition: excellent (used), Year of construction: 2010, Battenfeld HM 110/350 injection molding machine Year of production: 2010 Control: Unilog B6 Number of working hours - 35 0000 Injection unit: Screw diameter: 35 mm Injection pressure: 2083 bar Injection volume: 169 ccm Injection capacity: 153 g Closing unit: Closing force: 1100 kN Distance between columns: 470 x 420 mm Min mold height: 275 mm Opening: 500 mm Max mold height: 775 mm Ejector stroke: 150 mm General information: Machine dimensions (m) LxWxH: 4.0 x 1.5 x 2.1 m Weight: 4.500 kg Specification: 1. Plasticizing system with a diameter of Ø35mm. 2. (06.X17) Europakiet UNILOG B6 consisting of: - 07.D00 adjustment elements, - 02.K02 air valve controlled in time function - 01.C01 hydraulic control of the NW 6 core on the closing plate - 06.B21 robot connection according to EUROMAP 67 - 06.R02 2 Schuko 16A sockets mounted on the side wall of the control cabinet Hsdpfxowq D Nqe Aacew - 06.R20 2 CEE 16A sockets mounted on the side wall of the control cabinet 3. 06X06 UNILOG B6S package consisting of - extended functions of the control system with programs - APS system - cycle time analysis - user pages - visualization of graphic functions of actual values in the form of 16 curves - 4 surrounding curves - Alarm and logging protocol extended to 10,000 events - Quality Table function extended to 10,000 last cycles - additional USB ports for network connections - keyboard with foil buttons - Statistical Injection Process Control SPC function - injection speed, plasticization and hold-down pressure regulated by servo valve 4 machines in perfect condition are available.

Condition: new, Year of construction: 2025, total height: 6,000 mm, table height: 1,450 mm, total width: 2,400 mm, total length: 3,450 mm, pressing force: 1,000 t, table width: 1,500 mm, table length: 2,000 mm, overall weight: 65,000 kg, retraction force: 350 t, Equipment: safety light barrier, STANDARD FEATURES Steel construction body and parts with vibration method and stress / welding tension removed 8-surface slide / bearing for high precision and long-lasting use PLC control and touch panel Argon application for fixing elements and steel drawn pipes EN ISO 15614-1/2017 welding application certificate accredited by TÜRK-AK and approved by WPQR and WPS. (Welding applications are supervised by "welding coordination engineers" certified according to EN ISO 14731) Parallelism and perpendicularity tolerances are applied according to ISO AND DIN Norms. (≤ 120 microns/meter) PARKER / REXROTH hydraulic unit SIEMENS / SCHNEIDER electrical consumables Automatic central lubrication system Two-hand control Cooling system Hedpfjvu T Nisx Aacsw TECHNICAL SPECIFICATIONS SPECIFICATIONS PRESSURE : 1000/350 TON STROKE : 1000MM POT STROKE : 350MM TABLE SIZE : 1500X2000MM RAM SIZE : 1500X2000MM RAM-TABLE DISTANCE : 1100MM PRESS HEIGHT : 6000MM PRESS DEPTH : 2400MM PRESS WIDTH : 3450MM TABLE HEIGHT FROM THE FLOOR : 1450MM MAIN CYLINDER DIAMETER: 500MM X 2 ENGINE POWER: 75KW MAXIMUM WORKING PRESSURE: 250 BAR WEIGHT: 65000 COUNTRY OF ORIGIN: TURKEY WARRANTY PERIOD: 24 MONTHS WE HAVE A PRODUCTION CAPACITY FROM 100 TONS TO 2500 TONS. SINCE WE ARE A MANUFACTURER, TECHNICAL SPECIFICATIONS CAN BE CHANGED ACCORDING TO REQUEST. CONTACT US FOR DETAILED INFORMATION.

Condition: used, Technical details: Hodpfx Aaju Nk T Socow faceplate diameter: 350 mm width: 80 mm boring diameter: 50 mm weight of the machine ca.: 32,0 kg dimensions: 350x125 mm face slide with 4 internal/outer clamping chucks (clamping travel 80mm) clamping area internal: dia 110-350mm and external dia. 40 -300mm flange intake dia. 130mm *

Condition: ready for operation (used), functionality: fully functional, overall weight: 150 kg, table diameter: 300 mm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20.11.2025! Placing a bid is binding and obligates prompt collection between 01.12.2025 and 05.12.2025! TECHNICAL DETAILS Support diameter: 300 mm MACHINE DETAILS Dimensions & Weight Hsdexm U D Iopfx Aacjw Dimensions: 1,000 x 900 x 800 mm Weight: 150 kg EQUIPMENT Matching hardware

Condition: good (used), power: 210 kW (285.52 HP), fuel type: diesel, color: orange, Year of construction: 2021, operating hours: 3,900 h, Equipment: air conditioning, Technical information AdBlue system: Yes Make of engine: 6HK1X Top speed: 5 km/h Empty weight: 36.500 kg Hedpfx Aajxr S H Decow Functional CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: HCMDD750C00090029 Other information Undercarriage condition: 90 Output of the auxiliary hydraulics: 288 l/min Emission level: Stage V / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 11,35x3,19x3,52 Additional information Please contact Dennis van Loon, Antoon Schroder or Jeroen Rijk for more information

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 3500322132F, saw band length: 4,520 mm, saw band width: 34 mm, saw band speed: 1,666 mm/s, empty load weight: 1,200 kg, No minimum price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates timely collection between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Saw band length: 4,520 mm Saw band width: 34 mm Saw band thickness: 1.1 mm Saw band speed: 20 m/min – 100 m/min MACHINE DETAILS Roller conveyor length: 2,000 mm Roller conveyor width: 450 mm Hsdpoxm Rkqofx Aacsw Dimensions & weight Dimensions (L x W x H): 2,500 x 2,000 x 1,800 mm Net weight: 1,200 kg EQUIPMENT Roller conveyor