Used Fireplace Template Fbu for sale (141)

Condition: used, mileage: 211,736 km, power: 353 kW (479.95 HP), first registration: 03/2022, fuel type: diesel, overall weight: 20,500 kg, gearing type: automatic, Equipment: air conditioning, parking heater, soot filter, Vehicle number: 253199 1 owner, accident-free, full service history, non-smoker ---- HIGHLIGHTS & PACKAGES * Auxiliary heater ASSISTANCE SYSTEMS * Lane change warning system ENGINE, TRANSMISSION & CHASSIS * Traction control system (ASR) INTERIOR * Air conditioning * Left-hand drive * Driver seat armrest * Black seat belts LIGHT & VISIBILITY * LED headlights OTHER EQUIPMENT * ZF Intarder * 120 A alternator Additional features ----Paint/Color---- Cab color H3329GREE * Chassis color: Gray ----- Tires / Wheels ----- F1, 385/55R22.5MI XMF 160/000 K Steering BB72-2 * R1, 315/70R22.5MI XMD 154/150 L Traction DC75-2 * Steel disc wheels, silver gray ----- Equipment / Special equipment ----- Front axle 8T * Rear axle 13T * MX-13 engine, 355kW/483 HP * Automated TraXon transmission, 12 speeds * Technically permitted gross chassis weight max. 20,500 kg * AdBlue tank 90l on left fender * Emission class Euro 6 * Mechanical differential lock * Wheelbase 3.80m / rear overhang 0.99m * Steering wheel, leather, black * Glass roof hatch, electric operation * Driver's seat: Luxury Air * Pneumatic tool preparation * Passenger seat: Basic * Passenger seat fixed * Door trim: loosely woven fabric * Interior trim color scheme: Dark Sand * Cab interior trim Delta black * Water auxiliary heater * Timer for auxiliary heater * Roof hatch, electric operation * Cold foam mattress for lower bunk * Upper bunk * Lower bunk with 65-liter drawer * Automatic cab climate control * Safety net at both bunks * Curtains with partition curtain * Cool box or refrigerator * Three ignition keys * Auxiliary power supply: standard + 2x 40A * PL lights in cab roof lining * ECAS remote control with extended functions * Water auxiliary heater * Auxiliary heater with waste heat pump and timer * Single front axle * Single rear axle * Rear axle SR1344 * First steering rod height 84.5 mm * Camber adjustment for normal road conditions * First steering rod length 270 * With ECAS air suspension * Stabilink rear axle suspension * Parabolic front suspension * One driving height position, standard height * Front axle with leaf springs * Rear axle with air suspension * 4x2E * Type FT * Vehicle series XFH * Motor project version 10.673/74 * Fully Built Up (FBU) manufacturing * Cab width 2550 mm * Air filter with single element * Top air intake * Dust shield * Heated fuel pre-filter * Drive rear axle with disc brakes * Standard compressor pipe * Parking brake actuator with test position * Cab type U249 * Cab suspension mechanical * Cab - Super Space Cab Cedpjwk Ab Eofx Adasri * Super Space Cab * Convex main mirror * External sun visor, green translucent * Headlight beam for right-hand traffic * Fog lights * Skylights * Longitudinal member height 260 mm * Right chassis side clear, 1600 mm * Catwalk with step, standard * Steering with Euro certificate * Splash protection * Work lights, LED * Battery box in rear overhang * Aluminum air tanks * AdBlue tank 90 l, on left fender * Aluminum fuel tank, height 620 mm * EAS unit on right side * Tail lights with LEDs * Exhaust pipe horizontal, low * Front underrun protection 365 mm below frame * Idle shutoff automatic, 5 minutes * Rear axle ratio 2.38 * Premium sound system with 6 speakers * Speaker under lower bunk * Adaptive cruise control with F

Condition: new, ALTENDORF F 35 Type 1 - 1000 Panel Saw Robust, powerful, high cutting height – ideal for solid wood! - New machine - available immediately - Motor power: 7.5 kW, 400 V, 50 Hz, 3 speeds Motorized height and tilt adjustment Large protective hood Double roller carriage 3,200 mm Scoring unit preparation Rip fence, cutting width 1,000 mm Angle and mitre fence 3,450 mm, without longitudinal compensation Table extension/widening: powder-coated surface Saw blade tilt: 0 - 46° Cedpjxtbtpefx Adajri Carriage length: 3,200 mm Cutting length: 3,100 mm Cutting width: 1,000 mm Cutting height: 154 mm Max. saw blade Ø: 450 mm Screen size: 15 inches Working table height: 910 mm Extraction port Ø: 80 + 120 mm Including options: M45102 Rip fence 1000 mm Digit_X M64300 Front support roller M99008 Template holder

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Horizontal cutting range using a stop 300 x 120 mm Horizontal cutting range using a copy template 285 x 110 mm Spindle speed 12,000 rpm Clamping range for profiles 150 x 130 mm, adjustable up to 400 mm Travel 105 mm Credpfx Adextu Eleaoi Power supply 230/400 V, 3~, 50 Hz Power output 0.74 kW Compressed air supply 7 bar Air consumption per working cycle 12 l without spraying, 24 l with spraying Length 780 mm, depth 790 mm, height 1,545 mm, weight 210 kg Large cutting range despite compact design Copy routing using side stops or templates at a ratio of 1:1 Pneumatic tracer point with two levels for two different cutter diameters Our patented copy lever suspension ensures precision routing with a minimum of effort The table height is adjustable to accommodate very high profiles of up to 400 mm The “Spindle Lock” feature makes tool changing easy Pneumatic material clamping unit Pulsed coolant system Ready for operation Shipping via DB Schenker possible

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 18010, grinding wheel diameter: 762 mm, helix angle: 21 °, overall weight: 4,200 kg, grinding diameter: 400 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Credpfx Adexclb Asaei Grinding diameter: 400 mm Template wheel diameter: 64 - 320 mm Grindable module: 1 - 12 Template wheel width: 40 mm Number of teeth: 13 - 240 Roll curve diameter min./max.: 73 - 320 mm Workpiece carriage speed: 5 - 20 - 30 - 40 teeth/min Max. grinding wheel diameter: 762 mm Grinding wheel swiveling range: 5 - 21° Grinding slide swiveling range: ± 2 x 35° MACHINE DETAILS Total power requirement: 3 kW Machine weight: 4.2 t

Condition: new, weight max. in kg 500 kg arm length 4000 mm height 3425 Unterkante Ausleger total column height 4215 mm swivelling range 270 Grad Total weight, approx. 550 kg Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: - ABUS electric chain hoist - Chain hoist type GM 2 500.4-2, 2-leg - painted i color RAL 5017 traffic blue - load capacity 500 kg - hook path 3000 mm - highest hook position 2965 mm - Calculation basis FEM 9.901 Crodpjxak H Eefx Adasi - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1/4 m / min - Lifting power 0.09 / 0.35 kW - duty cycle 60% ED - Circuits 360 c / h Overload protection The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC as well as the currently valid UV regulations DGUV regulation 52 (formerly BGV D6). included : - Anchor rods L200 (set) size LS 200 - Consists of 8 pieces M27 mm x 800 mm with 1 steel template (500/8) - for fixing the foundation, including accessories for grouting There is an assembly gap between the column base to align the slewing crane and building floor to be provided. The assembly gap is after approx. 4 weeks Crane operation to be poured under by the customer. Fig. Shows a similar crane system

Condition: new, Year of construction: 2024, load capacity: 1,500 kg, Ideal for welded constructions, fixture construction, welding templates Special price promotion €2000 discount 3-D perforated table 2400 x 1200 x 200 mm Thickness of the table top 20 mm, diameter of the holes 28 mm, grid 100 mm Pivoting range 360° Height adjustment hydraulic motor 800 to 1200 mm Lifting movement hydraulic, rotation movement 360° Control with hand remote control Speed 0.5 rpm Hydraulic motor AC 2.2 KW Current AC 380 V Motor power 0.75 KW Price includes offered perforated plate 2400 x 1200 x 200 mm Price includes accessories shown, surcharge €2000 We offer the tables in many sizes and load capacities: Load capacity 500 Kg, dimensions 1000mm x 1500mm x 200mm, bore 28mm with manual or automatic height adjustment Load capacity 1000 Kg, dimensions 1000mm x 2000mm x 200mm, bore 28mm with manual or automatic height adjustment Load capacity 1500 Kg, dimensions 1200mm x 2400mm x 200mm, bore 28mm with manual or automatic height adjustment Load capacity 2000 Kg, dimensions 1200mm x 2400mm x 200mm, bore 28mm with manual or automatic height adjustment Load capacity 3000 Kg, dimensions 1200mm x 2400mm x 200mm, bore 28mm with manual or automatic height adjustment Crsdpfsvlplzex Adaoi Load capacity 5000 Kg, dimensions 1500mm x 3000mm x 200mm, bore 28mm with height adjustment manually or automatically

Condition: like new (used), Year of construction: 2021, operating hours: 100 h, functionality: fully functional, input voltage: 230 V, total length: 9,000 mm, total width: 1,200 mm, total height: 2,000 mm, compressed air connection: 5 bar, type of input current: three-phase, conveyor belt width: 1,000 mm, height adjustment type: electric, product height (max.): 1,200 mm, input frequency: 50 Hz, heating capacity: 12 kW (16.32 HP), power: 12 kW (16.32 HP), Equipment: documentation/manual, High-quality and multifunctional cleaning agents are available, which, together with innovative tools, enable optimized cleaning results. The result of intensive development in the company. Advantageous financing with low interest. The SpeedLine 2 is a continuous system in which screen printing stencils can be washed (removed from ink) in one continuous work cycle. The stencils with ink residues are placed on the conveyor belt of the loading station and the subsequent washing and stripping processes are controlled fully automatically with preset parameters. In daily practice this means: - No brush = gentle cleaning Cjdpsxuicbefx Adajri - Modular design - Extremely easy to operate - No complex programming = no specialist knowledge required - Robust, intelligent system technology - Low-maintenance design - Reduced-fill system = daily cost savings - Optimized cleaning results - Perfect Zentner Systems technology - Use of environmentally friendly chemicals The fully independent individual modules are integrated and connected to form the SpeedLine. The modular design of the device allows, for example, to adapt to capacity requirements. This means flexibility, the use of existing investments and the adaptation to current requirements. The standard version of the SpeedLine consists of the following modules: - Loading module - Paint wash module - Extraction module - Rinsing module - Unloading module The control panel is compact and allows the activation and deactivation of the individual modules. Operation is simple and user-friendly. SpeedLine is produced in three standard models: Model 10 for max. template frame height 1000 mm Model 12 for max. template frame height 1200 mm Model 16 for max. template frame height 1600 mm Model 22 for max. template frame height 2200 mm

Condition: new, cutting width max. 310 mm Cutting height max. 125 mm Codpfx Adjvu Hd Toaeri Saw blade diameter 500 mm Motor output 5,5 kW Speed 2.800 U/min. Required air-pressure 6-8 bar Working height 900 +/- 20 mm Dimensions (L/W/H) 10645x1000x1300 mm SALVAMAC COMBO 500 – The semi-automatic miter saw with SALVASTOP 100 - electronic length stop/slider ----- - Pos. 1: Legend 500 under table miter saw ----- - Maximum cutting area: 220x125/ 260x100/285x80/310x50 mm. When cutting boards that are on top of each other, h max. 100 mm. The structure is made entirely of thick-walled and reinforced full-surface painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cut control in ergonomic position. Motor power of the saw motor 5.5 kW. Adjustable cutting speed via a pneumatic controller. Maximum system for weight balancing and longevity. Shock absorbing system. Independent pneumatic adjustment options to adapt to different types of processing. Durable and easily replaceable saw blade adjustment bar. HM circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece clamping press with electro-pneumatic control. Presser movement system using new ball bearings with double dust protection and automatic lubrication system. CE compliant electrical system. The CE models must come standard with at least 1 meter long support plates at the inlet and outlet. Technical specifications: ----- Saw cross-section max. mm. 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: HM Z=108 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 7 Nl Intake manifold: 1 - 120 mm / 1 - 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50Hz 3-phase Worktop height: 900 mm +- 20 mm Colour: Ral 7035 - Ral 1007 Pos. 2: Salvastop 100 electronic length stop ----- - - Working method: 2 modes 1 x stop (length stop moves to the specified length) and 1 x slide (several lengths are processed one after the other at the push of a button) - with servo drive - Ram speed: up to 60 m/min - slider length 600 mm - with a 7'' touch display - maximum weight of logs that can be pushed - up to 100 kg - USB connection COMBO_500 - 6400/7000 - Roller conveyor with guide to the right of the saw. Painted steel frame with galvanized castors. Load capacity 230 kg, diameter 60 mm, spacing 250 mm, width 320 mm. 3 m. - 6400/7000 SalvaStop 100 to the left of the saw. Working length 6.4 m. Total length 7.0 m. With table top 7 m. Width 320 mm. Demonstration machine additionally equipped with: UP & DOWN FRONT PROTECTION Movable instead of rigid front protection. The guard rises during cutting to ensure safe working conditions. Loading and unloading wood is simplified with the downward-facing guard. The system has another special, secured pneumatic system with linear guidance, which impresses with top quality and cutting-edge technology. SOFTWARE LINK FILES Preparation for data import via a Salvamac file template in CSV format. ----- Total price demonstration machine from stock 73447 Oberkochen: on request! ----- More options like longer/shorter inlet/outlet, Stop systems on re...

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, The ideal machine for economical door manufacturing Crodpfoxtuz Hjx Adaei For routing lock cylinders and round rosettes (safety locks) in profile systems or multi-chamber profiles with large dimensional depths Three copy routing units which operate completely independently Separate control of the horizontal and vertical router heads The workpiece is clamped upwards towards the contact surface of the lock, which eliminates the need for readjustment of the machine for the backset when working with profiles of different heights The “Spindle Lock” feature makes tool changing easy Top routing unit: Cutting range using stops or copy templates 340 x 100 mm Travel 110 mm Bottom routing unit: Cutting range using stops or copy templates 240 x 85 mm Travel at front 95 mm Travel at back 45 mm Spindle speed 12,000 rpm Clamping range for profiles 115 x 100 mm Power supply 230/400 V, 3~, 50 Hz Power output per motor 0.74 kW Compressed air supply 7 bar Air consumption per working cycle 12 l without spraying, 24 l with spraying Length 980 mm, depth 1,250 mm, height 1,610 mm, weight 360 kg Continuously adjustable speed control from 3,000 - 12,000 rpm. This allows routing of even thin-walled steel and stainless steel profiles Machine is ready for operation. We can offer shipping via DB Schenker

Condition: excellent (used), Zeiss Coordinate Measuring Machine Model: O-INSPECT 442 Machine Designation: Coordinate Measuring Machine Machine Type: O-INSPECT 442 The multisensor measuring machine O-INSPECT ZEISS enables optimal optical or contact measurement of all features. The CALYPSO software simultaneously displays the actual state, nominal profile, and deviations, making measurement results easy to identify and interpret. General Data: Dimensions: Width 1055 mm, Length 1351 mm, Height 1770 mm Measuring range: X 400 mm, Y 400 mm, Z 200 mm Weight: CMM 800 kg Workpiece, max. 20 kg CMM noise level < 70 dBA Electrical Data: Supply voltage: 100, 110, 120, 125, 230, 240 V~ (± 10 %) Current type: 1 / N / PE Frequency: 50 to 60 Hz (± 3.5 %) Power consumption: max. 1500 VA Fuses: At 230 V or 240 V: 16 A At 100 V or 125 V: 15 A Travel Speeds: Creep speed, SLOW function: 0 to 5 mm/s Setup mode: 0 to 70 mm/s Automatic measurement: Axis (X, Y) max. 200 mm/s Axis (Z) max. 50 mm/s Axis (3D) max. 287 mm/s Cedpfx Adjw Titljaori Ambient Conditions: The following conditions must be met for proper operation of the measuring machine. Operating ambient temperature: +17°C to +35°C Relative humidity: 40% to 70% (non-condensing) Room temperature for measurement: 20°C ±1 K Altitude above sea level: 100–125 V: max. 3000 m 230–240 V: max. 2000 m Probe System: Probe System: CFS Probe Types Data: Probe Type: CFS 2 mm Measuring range: 2 mm, Working distance: 61 mm, Spot diameter: 12.5 µm Measurable surface angle to beam direction: 90 ± 15° Measuring range: 3 mm, Working distance: 22.5 mm, Spot diameter: 12 µm Measurable surface angle to beam direction: 90 ± 30° Measuring range: 10 mm, Working distance: 70 mm, Spot diameter: 24 µm Measurable surface angle to beam direction: 90 ± 20° The values for surface angles are limit values and depend on the reflectivity of the workpiece surface. Rotary Table: Mass and resolution Table weight: 7 kg Resolution: 0.15’’ Dynamics: Angular speed max: 50°/s Rotational speed: 8.3 min⁻¹ Scope of Delivery: In the standard version, the O-INSPECT coordinate measuring machine is supplied with the following components: - Coordinate measuring machine (CMM) - Controller (integrated) - Control panel - PC with peripherals - Software - CALYPSO 5.2 - Documentation - Probe system - Reference stylus - Calibration artifact - Calibration template Scope of delivery: (Zeiss coordinate measuring machine as shown) Condition: used (Specifications subject to change and errors excepted!) Please inquire about transport options prior to purchase. If you have further questions, we are happy to assist you by phone.

Condition: new, weight max. in kg 1000 kg arm length 4000 mm height 3000 Unterkante Ausleger total column height 3790 mm swivelling range 270 Grad Total weight, approx. 525 kg Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: - ABUS electric chain hoist - Chain hoist type GM 4 1000.5-2, 2-leg - painted in color RAL 5017 traffic blue - Load capacity 1 t Crjdpfx Asxak Hxsdasi - hook path 3000 mm - highest hook position 2442 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.3 / 5 m / min - Lifting capacity 0.22 / 0.9 kW - duty cycle 60% ED - Circuits 360 c / h Overload protection The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC as well as the currently valid UV regulations DGUV regulation 52 (formerly BGV D6). included : - Anchor rods L200 (set) size LS 200 - Consists of 8 pieces M27 mm x 800 mm with 1 steel template (500/8) - for fixing the foundation, including accessories for grouting There is an assembly gap between the column base to align the slewing crane and building floor to be provided. The assembly gap is after approx. 4 weeks Crane operation to be poured under by the customer. Fig. Shows a similar crane system

Condition: reconditioned (used), Year of construction: 2021, cutting length (max.): 3,000 mm, cutting width (max.): 1,000 mm, saw blade diameter: 500 mm, table length: 840 mm, warranty duration: 6 months, power: 5.5 kW (7.48 HP), Equipment: lighting, rotational speed infinitely variable, scorer, Template holder Cjdpfxowqf Egj Adaeri

Year of construction: 2008, condition: excellent (used), ELUMATEC SLK 118 3-Axis CNC Profile Machining Center.Template-free Profile Copy Router with (3) Controlled axii; designed for machining aluminum and thin-walled steel profiles and extrusions, aluminum, PVC, light alloyed steel.It is particularly suitable for companies who are automating their door production processes; designed for the door and window sector; machining from above, rotate workpiece for machining other side.Specifications:Traverse X-axis 2450 mm/ V max. 36 m/min. (with double linear guides)Traverse Y-axis 350 mm/ V max. 15 m/min.Traverse Z-axis 280 mm/ V max. 15 m/min.Spindle speed 18,000 rpm6.5 HP (4.5 kw) Motor-driven spindle,Routing spindle cooling device(4) Tool holders for tools.Dimensions: 3100 x 1850 x 2250 mm (122" x 73" x 89")Weight: 1400 Kg (3087 Lbs.)Features: PC Touch Screen Control w/Windows Software3-axis Control Light Barrier for operator protection;(4) Horizontal Material ClampsPulsed Coolant SystemCollet holderQuick-action chuckNOTE: The machine is in excellent condition an Codpsxc Udgsfx Adasri

Condition: used, Number of boring motors 1 St. boring of corner bearing 1=yes, 0=no 1 ja_yes boring of olive 1=yes, 0=no 1 ja_yes 1 HESS fitting drilling station for corner bearings and olives This Hess drilling station for tradesmen offers a lot of drilling technology for little money. A complete station for drilling corner bearings and olives with all the important features, such as 2 clamping cylinders, drilling depth sensing, effective suction, stop systems for corner bearing and olive drilling, drilling head with interchangeable chuck, adjustable drilling feed speed, automatic program sequence. This means technology for perfect work: just one machine with just one drilling unit and just one drilling head for 2 work steps. The system: - Base frame as a support wall for frames and sashes up to 100 mm - Drilling unit positioned in the middle, height manually adjustable via threaded spindle Crjdpfevu Hgzjx Adaei - Drill hole position and depth set to the specified fitting type, can be adjusted via a stop system when changing types - Drilling feed speed can be variably regulated via throttle valve - Direct extraction - Electro-pneumatic control system with automatic Program sequence for - Fixing workpieces - Drill motor on - Drilling unit forwards - Drilling - Drilling unit backwards - Drill motor off - Releasing workpiece fixation - Fixed stop systems Basic equipment / Technical data: Sturdy base frame as a support wall, precise support made of abrasion-resistant and dimensionally stable plastic, for frames and sashes up to 100 mm thick, Corner bearing and olive drilling in one machine and in one drilling unit, simple and convenient, vertical work, easy handling, no templates, minimal time required for the safe workpiece positioning, guarantee for exact and precise drilling, 2 clamping cylinders for immovable fixation of sash or frame, adjustable to different wood thicknesses, side stop in the rebate for the corner bearings, ergonomically arranged stop system for olive drilling with 14 swiveling stops and additional color markings, fixed stop system for drill hole height determination when changing from corner bearing to olive, automatic drilling depth sensing for corner bearing and olive, drill unit with quick-change chuck for the various tools for corner bearing and olive, tool change in "no time", automatic program sequence, clean work thanks to effective suction, small space requirement and mobile thanks to steering/brake rollers. Electrical equipment in accordance with VDE. Electrical connection: 0.55 KW, 400 V, 50 Hz. Pneumatic connection: R 3/8", 4 - 8 bar Extraction connection nozzle: 1 x 100 mm diameter Extraction speed: 25 m/sec. Space required: Width: 2600 mm Height: 1250 mm Depth: 800 mm Support height: 300 mm Paint finish: RAL 7030 stone grey with RAL 1018 zinc yellow 1 drill set with 1 drill 25 mm and 2 drills 10 mm plus 1 drill 34 mm diameter (technical data according to manufacturer - no guarantee!)

Condition: used, Year of construction: 2007, functionality: fully functional, For sale: CNC plasma cutting machine – designed for the production of flue caps and ventilation components. Condition: Used, in good technical working order, currently connected – viewing and testing on site possible. This equipment is intended for the manufacture of pipes, chimney caps, and ventilation elements from sheet metal and light metals. Crsdpoxlp Sqefx Adaei Technical specifications: - Year of manufacture: 2007 - Cuttable pipe diameter: from Ø60 mm to Ø600 mm - Maximum product length: 1500 mm - Sheet thickness (official): 0.5 – 1 mm - Tested capacity: cutting up to 3 mm wall thickness (depending on plasma source and metal type) - Plasma power sources: 2 units – 60A and 80A - Plasma output: 60 A / 80 A (depending on selected source) Features and equipment: - Fully programmable CNC controlled machine - Ability to generate cutting contours based on model or template - Precision automatic positioning and rotation system - Adaptable to different pipe diameters - Integrated plasma cutting control system with adjustable output - Comes with two plasma power sources (60A and 80A) – to suit your production needs Application: - Suitable for the production of ventilation systems, flue caps, ducting, and various tubular structures - Suitable for cutting thin sheet metal (0.5–1 mm) as well as processing thicker walls (up to 3 mm) - Utilization of CNC technology ensures high cutting precision and repeatability, reducing manual labor requirements If you have any further questions, please feel free to contact us.

Condition: as good as new (ex-display), functionality: fully functional, cutting width (max.): 2,100 mm, cutting height (max.): 105 mm, saw blade diameter: 350 mm, total length: 4,300 mm, power: 7.35 kW (9.99 HP), The FIMAL CONCEPT 350 ELITE is the further development of the proven CONCEPT 350 PLUS, setting new standards in precision, safety, and efficiency. With a reinforced machine base, optimized extraction system, and a redesigned Multistop fence table, it offers even greater comfort and performance for joiners, furniture makers, and industrial panel processing. Thanks to its pressure beam with automatic feed, the ELITE combines the flexibility of a sliding table saw with the cutting quality of a pressure beam saw – all within a footprint of just 28 m². Technical Specifications ⦁ Aluminum machine and extension tables ⦁ Saw unit tiltable up to 46° ⦁ Pressure beam, including LED lighting with 3 different action colors: WHITE: Machine in stand-by RED: Pressure beam lowering or emergency-stop function BLUE: Saw unit in motion ⦁ Versatile support table 1,000 x 500 mm ⦁ Scoring system via the main saw blade (co-rotating) ⦁ Automatic workpiece length detection for minimal travel distance ⦁ Mobile and height-adjustable control panel, including: Saw blade holder, template holder, emergency-stop button, start button, selector switch for grooving/scoring/cutting, rotary switch for feed speed, switches for laser (option) and USB socket ⦁ Max. saw blade projection (350 mm blade): 100 mm at 90° / 70 mm at 45° ⦁ Saw blade: diameter 300 – 350 mm, bore 30 mm ⦁ Saw blade speed: 4,000 rpm ⦁ Motor: 5 kW (= 7.5 HP) ⦁ Feed speed: 0 – 40 m/min ⦁ Total length: approx. 4,250 mm ⦁ Weight: approx. 1,300 – 1,700 kg (depending on cutting length and configuration) ⦁ Required air pressure: 7 bar ⦁ Extraction port: 1 x 100 mm, 1 x 120 mm ⦁ Extension table length: 3,670 mm / 4,270 mm / 4,870 mm (total length) ⦁ Tilting range: 0 - 46° ⦁ Sliding table: 1,000 x 400 mm (extension table) ⦁ Crosscut fence: 3,200 mm with 2 digital flip stops ⦁ Speed: 4,000 rpm ⦁ Air requirement: 6 bar ⦁ Motor voltage: 400 V (50 Hz) Csdpew Axf Rjfx Adaeri ⦁ Feed speed: 0 - 40 m/min Options Multistop, cutting width 2,100 mm instead of 1,300 mm Programmable saw blade height adjustment Miter fence +/-50° Cutting line laser Including delivery and installation within postal code areas 71,72,73,77,78,79,86,87,88,89

Condition: new, weight max. in kg 250 kg arm length 4000 mm height 3425 Unterkante Ausleger total column height 4.025 mm swivelling range 270 Grad Total weight, approx. 375 kg Description: - Load capacity 250 kg - projection 4000 mm - Construction height 4025 mm - Crane lacquer in color RAL 1007 daffodil yellow - Calculation basis DIN 15018 - Crane classification H2 / B2 - Operating location hall operation - Size / bracket profile LS36 / FormC 110x90 - Height of the lower edge of the boom 3425 mm - Operating voltage 3 / PE ~ 50 Hz 400 V - Direct control type of control - Degree of protection IP55 - Swivel range, nominally 270 ° - Panning by hand including: - Anchor rods size LS 36 - Consists of 8 pieces M24 mm x 800 mm, with 1 steel template (420/8) for - Fastening to the foundation, including accessories Electric chain hoist: - Chain hoist type GM 2 250.6-1, 1-leg - painted in color RAL 5017 - traffic blue - Load capacity 250 kg - hook path 4000 mm - highest hook position 3034 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.5 / 6 m / min - Lifting power 0.09 / 0.35 kW - duty cycle 60% ED Cjdpfxsxak D Re Adasri Fig. Shows a similar crane system

Condition: reconditioned (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 20-11-14-902, cutting length (max.): 3,200 mm, cutting width (max.): 1,000 mm, saw blade diameter: 450 mm, table length: 840 mm, Equipment: rotational speed infinitely variable, Manufacturer-refurbished Altendorf F45 with ElmoDrive control & Digit L display! TECHNICAL DETAILS Maximum cutting length: 3,200 mm Maximum cutting width: 1,000 mm Saw blade diameter: 450 mm Table length: 840 mm Saw blade projection 90° single-sided tilt: 154 mm 90° dual-sided tilt: 154 mm +45° single-sided tilt: 105 mm +45° dual-sided tilt: 105 mm -45° dual-sided tilt: 78 mm MACHINE DETAILS Power: 5 kW Dust extraction connection Upper extraction: Ø = 80 mm Lower extraction: Ø = 120 mm Suction pressure: 1,200 Pa at total extraction port, Ø = 140 mm Airflow: v_min = 1,110 m³/h at 20 m/s Air cushion table Compressed air consumption: 200 l/min at 1 bar (max. 400 l/min at max. 3 bar) Csdpexc T Tmefx Adaori EQUIPMENT Continuously variable speed Dual-sided tilting Scorer preparation Template holder Digit - L PA 1,000 mm - CNC Front support roller

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, year of last overhaul: 2025, Complete production line for plastic windows (Rehau profiles) The plant remains operational and can be inspected while in use on site until December 2025. From December onwards, it will be available for dismantling. The automatic 4-head welding machine with corner cleaner can also be purchased separately – or together with the entire production line. The line is fully equipped and immediately ready for operation – ideal for the direct manufacture of plastic windows. All machines are in excellent condition. Cutting / Preparation: • SD25 Cross-cut saw • RU-VGPA3 • Macc metal saw • Wegoma V6/S water slot milling machine • Wegoma GL142P glazing bead saw • Wegoma AFK125 counter milling machine • Wegoma SK212 olive drill automation • Profile cutting trolleys (2 units) Welding & Processing: • Urban AK86250-35/25 – 4-head welding machine • SL2V double-head welding machine • Welding jaws incl. trolley • Urban SY530B corner cleaning machine with drilling unit • Wegoma SBA 1TS screw automation • Powerseat automatic screwdrivers (2 units) • KFM Urban copy router Extraction & Compressed Air: • Elektra Beckum SPA1000 extraction unit • Leoy Somer extraction unit • Kaeser SK 21 compressor • Schneider compressed air tank • Schneider air dryer Conveying Equipment & Storage: • Transport trolleys (7 units) Crjdpfx Adsxg Al Tjaei • Cantilever racking (3 units) • Ruchser stop table • Gasket roll-off trolley • Side table at cleaning machine • Rack with rollers • Vertical stop table (2 units) • Horizontal stop table • Fittings rack with template • Heavy-duty rack (1 unit) Additional Equipment: • Manual squeegee tool • MD/230V swinging crane with suction lifter Software: • ProLogic software incl. 1 PC

Condition: used, color: other, first registration: 08/2006, Year of construction: 2006, Serial number: UNKNOWN NO TEMPLATE. We have a stock of >100 axles. Crsdpow Tkvuefx Adaoi Please contact us if you can't find what you are looking for.

Condition: new, Year of construction: 2023, functionality: fully functional, cutting width at rip fence: 1,300 mm, cutting height (max.): 204 mm, main saw diameter: 550 mm, height adjustment type: electric, table height: 910 mm, slide length: 3,200 mm, power: 5.5 kW (7.48 HP), Equipment: motor brake, rotational speed infinitely variable, Altendorf F45 EvoDrive Year of manufacture 2023, new machine - Template holder on the terminal - Extended cutting height, saw blade up to 550 mm, cutting height 204 mm - Motor 5.5 kW (7.5 HP) VARIO (infinitely variable speed control) Codpfx Ajvw S Hfodaeri - Preparation for 2-axis scoring saw - Table top extension 840 mm - Double roller carriage length 3200 mm - Angle miter stop - CNC parallel stop 1300 mm - Front support roller

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 18-03-12-070, cutting length (max.): 3,000 mm, cutting width at rip fence: 1,300 mm, saw blade diameter: 450 mm, Equipment: rotational speed infinitely variable, Manufacturer-refurbished Altendorf F45 ProDrive with angle miter fence and Digit L display! TECHNICAL DETAILS Maximum cutting length: 3,000 mm Cutting width at rip fence: 1,300 mm Table length: 840 mm Main saw blade diameter: 450 mm Saw blade projection 90° with single-sided tilt: 154 mm 90° with double-sided tilt: 154 mm +45° with single-sided tilt: 105 mm +45° with double-sided tilt: 105 mm -45° with double-sided tilt: 78 mm MACHINE DETAILS Power: 7.5 kW (10.20 HP) Dust extraction connection Upper extraction: Ø = 80 mm Lower extraction: Ø = 120 mm Negative pressure: 1,200 Pa at total extraction connection, Ø = 140 mm Air consumption: v_min = 1,110 m³/h at 20 m/s Air cushion table Compressed air consumption: 200 l/min at 1 bar (max. 400 l/min at max. 3 bar) EQUIPMENT Continuously variable speed Template holder Front support roller Air cushion table WGA Digit-L PA 1300 mm CNC Crsdpfx Adoxc Ufqjaei

Condition: used, color: other, first registration: 08/2006, Year of construction: 2008, Serial number: NO TEMPLATE We have a stock of >100 axles. Crsdpfx Adsw Tku Deaji Please contact us if you can't find what you are looking for.

Condition: reconditioned (used), Year of construction: 2020, cutting length (max.): 3,800 mm, cutting width (max.): 1,300 mm, saw blade diameter: 500 mm, table length: 1,200 mm, power: 5.5 kW (7.48 HP), Equipment: rotational speed infinitely variable, Template holder TPL 1,200 mm reinforced Crodpswqfxtsfx Adaei On/off switch at DRW WGA Digit - L Extendable cross slide extension PA 1,300 mm - CNC Front support roller Laser - kerf indicators

Condition: used, color: other, first registration: 08/2006, Year of construction: 2006, Serial number: no template We have a stock of >100 axles. Credpfew S E Snsx Adasi Please contact us if you can't find what you are looking for.