Used Fence for sale (1,039)

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 306533, functionality: fully functional, cutting height (max.): 350 mm, cutting width (max.): 610 mm, overall weight: 550 kg, saw band length: 4,700 mm, TECHNICAL DETAILS Saw band length: 4,700 mm Tool dimensions: 13 × 0.65 × 24 TPI Guide roller diameter: 630 mm Cutting height: 350 mm Cutting width without rip fence: approx. 610 mm Cutting width with rip fence: 150 mm Loading height: 1,065 mm Cutting speed: 10–100 m/min Table travel: approx. 600 mm Table feed rate: 0.03–0.3 m/min MACHINE DETAILS Dust extraction connection diameter: 1 × Ø 120 mm + 1 × Ø 100 mm Kodpfxjz Im Sko Acpenc Required flow velocity: min. 25 m/s Required volume flow: 1,725 m³/h Operating voltage: 400 V / 50 Hz Type of current: 3 × 400 V Fuse rating: max. 16 A Minimum conductor cross-section: 1.5 mm² Motor power: 0.75 kW Dimensions & Weight Dimensions (L x W x H): approx. 1,850 x 1,200 x 2,300 mm Machine weight: approx. 550 kg

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, cutting height (max.): 155 mm, cutting width (max.): 1,250 mm, saw blade diameter: 450 mm, cutting length (max.): 3,450 mm, The machine has been completely overhauled by the manufacturer! TECHNICAL DETAILS Sawing unit Cutting height: max. 155 mm Cutting height at 45°: max. 105 mm Saw blade diameter: max. 450 mm Saw blade arbor: 30 mm Swivel range: 0–46° Motor power: 5.5 kW Speed: 3,000 / 4,000 / 5,000 / 6,000 rpm Cutting range Ksdpfxoz Irygj Acpenc Cutting width: 1,250 mm Cutting length: 3,450 mm Sliding table length: 3,200 mm Cross slide and stops Digital folding stops: 3 Cross slide extendable up to: 3,500 mm Positioning accuracy parallel stop: 0.1 mm EQUIPMENT Scoring unit Auto-EPS with electromechanical side and height adjustment Electrically controlled parallel stop Electrically controlled axis adjustment Cross slide with 3 digital folding stops Machine completely overhauled by the manufacturer Sliding table completely re-adjusted Linear guide rail converted to a new digital system with 3 stops Stainless steel scale for angle adjustment renewed Cross slide checked 90° locking of the fence completely renewed Electrical system checked Machine re-adjusted, checked, and lubricated German-language documentation

Condition: used, total length: 3,450 mm, total width: 2,200 mm, total height: 1,500 mm, Year of manufacture: 2004 Colour: Green Weight: 1.500 kg - Year: 2004 - CE marking present: Yes - Serial number: - Main motor power [kW]: 5.5 - Parallel stop displacement [mm]: 1350 - Roller table length [mm]: 3400 - Table width [mm]: 1450 - Min. saw blade diameter [mm]: 200 - Max. saw blade diameter [mm]: 450 - Arbor saw blade diameter [mm]: 35 - Dust extraction nozzle diameter [mm]: 115 - Controlled axes: Tiltable, Rip fence, Scoring unit height, Scoring unit lateral adjustment, Cutting height - Electrically adjustable axes: Rip fence, Cutting height, Tiltable, Scoring unit lateral adjustment, Scoring unit height - Spindle speed: Manual - └ Min. spindle speed [rpm]: 3000 - └ Max. spindle speed [rpm]: 6000 - └ Spindle speed control: Incremental - Schuinstelbare zaagaggregaat: - └ Min. tilt adjustable [°]: -3.1 - └ Max. adjustable [°]: 43.8 - Voltage [V]: 400 - Current consumption [A]: 13.5 - Fuse [A]: 16 - Power [kW]: 7.0 - Transport dimensions: 3450mm x 2200mm x 1500mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Ksdpfx Ace Aazbkjpsnc Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1992, Table milling machine, Panhans Type 250, from a training workshop. - Dovetail and slot table - Aigner integral fence - Elu feed system - Power: 5.5 kW - Speeds: 3000/4500/6000/9000 rpm - Clockwise/counterclockwise operation - Spindle: 30 mm #8503 Net price Ksdpsztwr Ijfx Acpsnc

Condition: new, Complete construction fence set – 30 construction fences including feet, clamps, and a combination pallet Knsdpe Aaw Rnsfx Acpsc Complete set for quickly and practically fencing off construction sites, grounds, and event locations. The set consists of 30 construction fences with matching fence feet and connecting clamps and is delivered with a combination pallet for easy transport and storage. Suitable for professional use in construction, rental, events, and site security. 🔧 Specifications Number of construction fences: 30 pieces Construction fence feet: 30 pieces, 25 kg Fence clamps: 30 pieces, type 42-42 Transport: Includes 1 combination pallet Example construction fence – type Mona: Dimensions: 3.45 x 2.00 m Mesh width: 100 x 300 mm Diameter of uprights: 40.4 mm Diameter of rails: 27.0 mm Wire thickness, horizontal: 4.0 mm Wire thickness, vertical: 3.0 mm Weight: approx. 18.9 kg Finish: Hot-dip galvanized ✅ Advantages Complete set ready for immediate use Includes feet and connecting clamps Combination pallet for efficient transport and storage Suitable for construction sites and events Robust galvanized design Ideal for rental or expanding existing inventory Application Suitable for temporarily fencing off and securing construction sites, event grounds, and other locations where a flexible and quickly deployable barrier is needed.

Condition: new, Complete construction fence set – 31 construction fences with a horizontal pallet Complete set with 31 construction fences and a horizontal construction fence pallet for easy transport and storage. Suitable for professional use on construction sites, event venues, and other locations where temporary fencing is required. Ideal for rental, project use, or supplementing your own stock. 🔧 Specifications Number of construction fences: 31 Type of construction fence: Mona, with a vertical center tube Transport: Includes 1 horizontal construction fence pallet Dimensions of construction fence: Width x height: 3.45 x 2.00 m Mesh size: 100 x 300 mm Diameter of uprights: 40.4 mm Diameter of crossbars: 27.0 mm Wire thickness, horizontal: 4.0 mm Wire thickness, vertical: 3.0 mm Weight: approx. 18.9 kg Finish: Hot-dip galvanized ✅ Advantages Kedj Aaw R Ispfx Acpjnc Complete set ready for immediate use Includes horizontal construction fence pallet Efficient to transport and store Robust, hot-dip galvanized construction Suitable for construction sites and events Ideal for rental and professional use Application Suitable for the temporary fencing and securing of construction sites, event venues, and other locations where flexible partitioning is required.

Condition: new, Construction fence with Douglas fir wood panel – durable, robust, and easy to maintain. Robust construction fence with a hot-dip galvanized and hand-welded steel frame, combined with a Douglas fir wood panel. Thanks to the galvanized finish, the frame is highly resistant to rust and weather conditions, making it suitable for long-term outdoor use. Kedpfx Acj Aaxc Ssponc The wood panel can be replaced separately, so if it is damaged, the entire fence does not need to be replaced. 🔧 Specifications Welding: Hand-welded Panel dimensions: 2160 x 2000 mm Weight: approx. 37 kg Frame material: Hot-dip galvanized steel Vertical tube: Ø 40 mm Horizontal tube: Ø 28 mm Wall thickness: 1.5 mm Mesh size: 35 x 150 mm Horizontal wire thickness: 4.0 mm Vertical wire thickness: 3.0 mm U-profile: 40 x 42 x 40 mm Panel material: Douglas fir wood Douglas fir plank: 145 x 17 x 1090 mm ✅ Advantages Robust, hand-welded frame Hot-dip galvanized for rust and weather resistance Strong and high-quality construction Replaceable Douglas fir wood panels Suitable for long-term outdoor use Durable solution in case of damage Application Suitable for securely and attractively fencing off construction sites, areas, and other locations where both screening and durability are important.

Condition: used, Year of construction: 2001, saw blade diameter: 150 mm, type of input current: three-phase, Startrite SC160 professional panel saw / sliding table saw, manufactured in 2001. Fully working and available to view/test by arrangement. Features include: • Large sliding table Kjdoz Nl Hkjpfx Acponc • Sliding crosscut table and adjustable fence • Rip fence • Main saw blade diameter: 150 mm minimum • Blade angle adjustment up to 45° • Professional workshop machine • 3-phase supply • Substantial, heavy-duty machine The machine is in used workshop condition with normal signs of use and cosmetic wear, as shown in the photographs. Collection from Tamworth, Staffordshire. Buyer to arrange suitable collection and transport. Please study all photographs carefully. Further information available on request.

Condition: excellent (used), Year of construction: 2008, BÖSCH/HEWEMA universal miter fence A97 for panel saws When in the closed position, 90° angle cuts are performed. Knjdozbytljpfx Acpec When adjusting the cutting angle, the two fence profiles are moved synchronously. Cuts can be made on both the front and rear supports. The saw angle is read on the scale disc.

Condition: excellent (used), Year of construction: 2014, operating hours: 443 h, Model Amada HFE MK2 80 x 2500 , 4 axis Hydraulic Downstroking Press Brake VERY LOW HOURS 443 Year 2014 Tonnage 80 tonnes Kedpszmtqaefx Acpjnc Max. Bend Length 2500 mm Stroke Length 200 mm Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Oil Capacity 110L Motor Power 9kw Weight 5600 Kg guarding Erwin Sick machine mounted light screen guards, side and rear interlocked fencing Dimensions Machine Length 3950 mm Machine Depth 2580 mm Machine Height 2540 mm Distance Between Side Frames 2125mm Beam width 60 mm Table height 960 mm Open Height 470 mm Throat Depth 420 mm

Year of construction: 2018, condition: used, - Robot axes: 6 - Reach: 4683 mm - Payload: 1700 kg Kjdpszuz Icofx Acpjnc Industrial robot with conveyor system and safety fence Manufacturer: Fanuc Type: M-2000iA/1700L Year of manufacture: 2018 Technical data - Robot axes: 6 - Reach: 4683 mm - Payload: 1700 kg Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 440.10.008.12, functionality: fully functional, operating hours: 500 h, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 9 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 102 mm, cutting width (max.): 2,600 mm, saw blade diameter: 315 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, actuation type: manual, rotational speed (max.): 4,700 rpm, total length: 2,200 mm, total width: 1,500 mm, total height: 1,070 mm, overall weight: 350 kg, table height: 90 mm, year of last overhaul: 2012, Equipment: CE marking, documentation/manual, saw blade guard, Sliding table saw/spindle moulder combination machine; in very good condition, having seen only light use in a joinery/cabinetmaking context. Purchased in 2012. Available for viewing and testing in Wavre, Belgium; the machine is fully operational for demonstrations. See also my listings for a Felder AD741 planer-thicknesser and a Hammer N4400 bandsaw (same location). Electrical connection: 3 x 400 V, 50 Hz, 4 kW. Ksdpsz H Sbbofx Acpjnc Cutting length ("X-Roll" sliding table): 2050 mm. Cutting height: 102 mm. Tilting blade (90° to 45°). Removable and tilting spindle moulder shaft (90° to 45°). Scoring unit. Sold with all accessories: - 2 Silent-Power saw blades (315 mm diameter) - 1 Silent-Power saw blade (250 mm diameter) for use with the scoring unit - Scoring blade (80 mm diameter) - Rip fence (800 mm length) - Mitre fence (2800 mm length) - Eccentric clamp for sliding table (similar to Felder art. no. 400-108) - Spindle moulder fence with fine adjustment + "Euro II" safety guard - Rebating cutter (140 mm diameter; similar to Felder art. no. 04.2.098) - Tongue-and-groove cutter (140 mm diameter; similar to Felder art. no. 04.3.122) - F48 power feeder (4 wheels, 120 mm diameter, 8 speeds) + tilting mount - 3 dust extraction ports: below and above the saw, and at the rear of the spindle moulder fence Dimensions and weight: see manual excerpt (photo).

Year of construction: 1999, condition: used, Adjustment of the milling stop: via handwheel Knjdpfxjz I Iu Ts Acpec Milling stop scale display: digital display Adjustment of the milling vice: handwheel Milling vice scale display: digital display Swiveling mechanism: yes

Condition: good (used), Year of construction: 2020, functionality: fully functional, 5.5 kW, -45/+45° tiltable, Knsdpfxoykar He Acpsc electric height and swivel adjustment Left/right, 6 speeds Aigner fence 2 x 500 mm, digital readout on the spindle fence, table 2500 mm x 780 mm, mechanically programmable spindle fence with two displays, system for quick removal from the worktable New price: €18,700 Available around September 2026 Shipping available at extra cost!

Year of construction: 2023, condition: used, functionality: fully functional, Online bankruptcy auction – Nenco Food B.V., Berkel en Rodenrijs (NL). Closes Monday 26 October 2026 from 14:00 CET. Viewing Friday 23 October, 10:00–15:00. Europack Winner 400 robot palletising line, year of manufacture 2023 Complete end-of-line palletising cell for bags up to 25 kg, installed by Ausloos Verpakkingstechniek. Two infeed stations, from a gluten-free flour and dry-mix co-packing plant. Knodjz Ipydspfx Acpec The line consists of: - Europack Winner 400 palletising robot with rotating pneumatic bag gripper and powered pallet roller conveyors - 2 bag infeed belt and roller conveyors, approx. 750 cm, to the robot (robot footprint approx. 120 x 130 cm) - Ausloos pallet dispenser and destacker stations - 2 rotating buffer tables, ø approx. 192 cm - Transfer station and slip-sheet station - Mesutronic metal detectors, 2022 - Stimag/OHAUS Defender 5000 Xtreme pallet checkweigher, 10–1,500 kg - Evolabel T63 FlexWipe G2 automatic labeller, 2023 - Tosa model 090 pallet stretch wrapper, 2023 - Jib crane with Donati hoist - Roller conveyors in various lengths, including approx. 8 m outfeed conveyor - Safety fencing with doors and light curtains - Control cabinet Footprint: approx. 17 x 10 m 400 V Condition: used Lot 44. This line was fed by two Technipes TE.2/50 automatic bagging lines, 2024 (lots 42 and 46), also in this auction, so the complete bagging and palletising set is available. Bidding online only, after registration. Dismantling and loading are mandatory and carried out by Auction Logistics at the buyer's expense: € 11.700 excl. VAT for this lot.

Condition: good (used), Machine Security Fencing Knedpfopy Ei Uox Acpoc Dimensions approx 3000mm x 4000mm Complete with entry gates

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 51.10.318.12, functionality: fully functional, operating hours: 300 h, power: 3 kW (4.08 HP), input voltage: 400 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 315 mm, cutting width (max.): 420 mm, control type: manual, roller diameter: 440 mm, pivoting range: 45 °, actuation type: electric, total height: 1,900 mm, total length: 780 mm, total width: 650 mm, overall weight: 140 kg, table height: 91 mm, year of last overhaul: 2012, saw band speed: 333 mm/s, Equipment: CE marking, documentation/manual, motor brake, saw blade guard, Sliding table saw/spindle moulder combination machine; in very good condition, having seen only light use in a joinery/cabinetmaking context. Purchased in 2012. Knjdpfoz Im Huex Acpjc Available for viewing and testing in Wavre, Belgium; the machine is fully operational for demonstrations. See also my listings for a Felder AD741 planer-thicknesser and a Hammer N4400 bandsaw (same location). Electrical connection: 3 x 400 V, 50 Hz, 4 kW. Cutting length ("X-Roll" sliding table): 2050 mm. Cutting height: 102 mm. Tilting blade (90° to 45°). Removable and tilting spindle moulder shaft (90° to 45°). Scoring unit. Sold with all accessories: - 2 Silent-Power saw blades (315 mm diameter) - 1 Silent-Power saw blade (250 mm diameter) for use with the scoring unit - Scoring blade (80 mm diameter) - Rip fence (800 mm length) - Mitre fence (2800 mm length) - Eccentric clamp for sliding table (similar to Felder art. no. 400-108) - Spindle moulder fence with fine adjustment + "Euro II" safety guard - Rebating cutter (140 mm diameter; similar to Felder art. no. 04.2.098) - Tongue-and-groove cutter (140 mm diameter; similar to Felder art. no. 04.3.122) - F48 power feeder (4 wheels, 120 mm diameter, 8 speeds) + tilting mount - 3 dust extraction ports: below and above the saw, and at the rear of the spindle moulder fence Dimensions and weight: see manual excerpt (photo).

Condition: used, machine/vehicle number: 10479-1, Year of construction: 2016 Equipped with automatic pallet infeed station, buffer conveyor, digital display, pallet stacker, protected by safety fencing. Working width buffer stattion: 1250 mm Product being depalletized: Glass bottles Depalletizing method: Layer depalletizing Maximum capacity: 2.5 layers/min Dimensions setup approximately (LxWxH): 15.000x5500x2200 mm Knedpsz Ti Ruofx Acpoc Online auction of high quality food industry processing equipment (e.g. STEPHAN mixing, HEMA, BOSCH piston filling, HEUFT x-ray inspection, NIETZSCHE pumps, PRASMATIC, PAGO packaging and labelling etc.), various mustard mills, rotary sieves and further universal processing equipment due to the plant closure of the renowned tube, glass and bottled mustard and mayonnaise manufacturer at Neuss near Dusseldorf in Germany. The online auction opens Friday 16 October and closes Tuesday 3 November. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Thursday 29 October Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, Fixed table 850 x 1100mm in grey cast iron - Table height 900mm Knedpfxsz N Hcmj Acpec - 3.3m sliding table, anodised aluminium construction, wear resistant tempered guides with self cleaning design. Replaceable table edge. Infinitely locking design - Min / max blade dia 250mm - 400mm giving 130mm max cutting height at 90 degrees 30mm bore with 2 x 8mm drive pins / 60mm ctres. - 5.5kw motor 4000 / 4800 / 6000 rpm rotation speed - Blade tilting up to 46 degrees - Power rise / fall / tilt, with rapid and slow creep movement - Riving knife mounted saw guar - Pro lock quick change system of the saw blade - Rip fence with easy sliding movement thanks to four grooved ball bearings. Micro metric adjustment and scale. Movement via handwheel - Cutting width - blade to rip fence 1350mm - Cross cut fence in anodised aluminium with continuous support, micro adjustment for both flip stop. Cutting length 95 to 2000mm, can be extended to 3220mm - Cross cut table in galvanised steel construction - Operating controls easily accessible on main frame - Dust extraction connection 100mm on overhead guard and 120mm dia in machine frame - 2 x riving knives 3.5" TFT overhead control unit at eye level with keyboard. - Electronic control of cutting height / cutting angle in program memory - Tool calculation including storage of 50 blades - Memory of 10 cut lists each with 50 cutting lines - FK for shortcut to frequently used functions - USB interface -2 axis scoring saw electrically adjustable. Scoring saw height and left / right position can be electrically adjusted while blade is running. Pneumatic lifting / lowering - Handndwheel adjustment of the rip fence and digital indication in control panel - 1 x 350mm dia main blade and solid scoring blade - 3.3m sliding table - Parallelogram crosscut table with analogue stop - LCD readout of angle setting

Condition: used, A compact but robustly built industrial level free standing resaw. Variable feed speeds Suitable for softwoods and hardwoods Quick, simple and safe to operate Feeding system / general capacity. RVP 200 variable speed feed system Steel feed rollers 200mm dia. Variable feed speed 0 - 30 mt/min speed. Max. feed roller to blade clearance 200mm. Max. fence to blade clearance 200mm. Main saw Dia. of saw pulleys 800mm. Max. cutting height 400mm. Max. blade width 80 x 0.8mm. Max. / Min blade length 5530 / 5380mm. Height of the table from the floor 950mm. Table size 1060 x 8000mm. Automatic star-delta starter. Automatic pneumatic braking of wheels. Knedpszx D Umsfx Acpsc Safety micro-switch to doors. Front infeed support rollers with emergency protection cable. Tilting table 15 dergrees. Telescopic blade guard. CHACO blade guide on the table. Rackwork. Dust scrapers on wheels. Steel saw blade ready for use. Extraction points x 2 - 100 and 120mm dia. Working air pressure 6 to 8 bar.

Condition: good (used), Year of construction: 2010, operating hours: 912 h, functionality: fully functional, Well-maintained and little-used Gabbiani / SCM Galaxy 105 horizontal panel dividing saw. In TOP condition!! Only 912 operating hours. Year of manufacture: 2010 Cutting width: 4,500 mm Fence depth: 4,100 mm Kodpfx Acoz Evm Sepenc Cutting height: 105 mm Saw blade: 380 mm The machine can be inspected while running.

Condition: used, Year of construction: 1999, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 15 mm, height adjustment type: electric, feed rate X-axis: 20 m/min, total length: 9,200 mm, total width: 1,600 mm, overall weight: 4,000 kg, Equipment: CE marking, For sale: OTT Euromatic edge banding machine Machine data: * Year of manufacture: 1999 * Machine length: 9,200 mm * Machine weight: approx. 4,000 kg * Maximum edge thickness: 60 × 15 mm * Edge thickness up to 20 mm also possible (by adjusting the flush trimming unit) * Minimum workpiece width: 60 mm * Minimum workpiece length: 160 mm Equipment: 1. NC-controlled infeed fence 2. Joining milling unit 3. Glue application 4. Pressure zone 5. Miter saw (swivels 15°) 6. Flush trimming unit 7. NC-controlled chamfer milling cutter (0–3 mm) 8. Rounding milling cutter R2 9. Corner copying unit R2 (postforming processing possible) 10. Rounding scraping blades 11. Surface scraping blade 12. Oscillating buffing unit 13. NC-controlled upper pressure bridge Notes: * The dust extraction system is not included in the sale. * The machine will be disassembled by us and delivered to the workshop door. * Loading can be arranged upon request (not included in the purchase price). * The removal of the machine must be organized by the buyer and will be at their own expense. * Sale due to the purchase of a new machine. * Available from the 1st week of December 2026. * The machine can be inspected and tested at any time by prior appointment. Knsdpfx Ajz S U S Ijcpoc

Condition: used, Year of construction: 2024, functionality: fully functional, input voltage: 400 V, Online bankruptcy auction – Nenco Food B.V., Berkel en Rodenrijs (NL). Closes Monday 26 October 2026 from 14:00 CET. Viewing Friday 23 October, 10:00–15:00. Technipes TE.2/50 G/T-500 + LC/Futura automatic bagging line, year of manufacture 2024 Complete open-mouth bagging line for 10–25 kg bags, installed by Ausloos Verpakkingstechniek, serial no. CO.23.088. Used for gluten-free flours and dry mixes; in production until August 2026. The line consists of: Kedpfx Acsz Iptdjpenc - Technipes Tecno/500 bag placer / filling unit with bag magazine - Technipes LC1 load cell and TE.2/50 G/T-500 gross weighing and dosing system, filling range 10–25 kg - Fischbein model 100 bag sewing machine with bag infeed - Evolabel T63 automatic bag labeller - Neroco metal detector on conveyor - Various conveyors, plus one conveyor and roller section located above the palletising line (lot 44) - Siemens SIMATIC HMI touch panel and control cabinet - Safety fencing with access doors; aluminium frame with transparent panels 400 V Dimensions approx. 320 x 500 x 210 cm Condition: used Lot 42. A second, identical line is lot 46 (TE.2/50 S/T-500 + LC/Futura, 2024, serial CO.23.009-1). Both lines fed the Europack Winner 400 robot palletising line, 2023 (lot 44), which is also in this auction, so the complete end-of-line set is available. Bidding online only, after registration. Dismantling and loading are mandatory and carried out by Auction Logistics at the buyer's expense: € 3.530 excl. VAT for this lot.

Condition: used, Features Siemens IE3 type electro magnetically braked motors All spindle motors with Star delta starting system Kodpfx Asz Il Tgjcponc Edge reference straightening system 65 mm high fences Telescopic bedplates between vertical spindles Infeed side pressure unit Double side pressure unit opposite fence side head moving with near side head with pneumatic loading Adjustable side guides after near side head Pad pressure after top head with vertical screw adjustment and mechanical digital readout 2000 mm pre-straightening infeed table with fence each 10 mm adjustment 40 mm diameter spindles belt driven, with spindle speed of 6000 rpm All spindles have horizontal and vertical adjustment, with mechanical digital readouts for fast and accurate setting Independent manual vertical adjustment to top head High precision spindle units with high speed bearings All bedplates and fences have 0.3 mm hardened chrome HRC at 60° Automatic bed lubrication system with timer control Chipbreaker assembly before first and second top head with twin cylinder pneumatic loading One piece heavy duty cast iron main frame with optimum vibration absorption Centralised lubrication system to all main slides Vertical spindles have 80 mm vertical adjustment Horizontal spindles have 40 mm horizontal adjustment Safety interlock at infeed to prevent feeding oversized material ATS electronic positioning by keypad control and motorised adjustment to near side spindle horizontal movement with dual LED measurement display for tool compensation to give radius and actual cutting sizes (Model REC-705B) ATS electronic positioning by keypad control and motorised adjustment to first top spindle vertical movement with dual LED measurement display for tool compensation to give radius and actual cutting sizes (Model REC-705B) – additional LED dual readout display Type REC-720 positioned at first top head ATS electronic positioning by keypad control and motorised adjustment to second top spindle vertical movement with dual LED measurement display for tool compensation to give radius and actual cutting sizes (Model REC-705B) – additional LED dual readout display Type REC-720 positioned at second top head Note: The REC-720 LED dual readouts are linked together with the main REC-705B controller so that they both read the same whether the spindle is adjusted from the top head position manually or at the infeed controller with motorised adjustment – both top heads move together. Lift up sound and safety enclosure including internal lighting and safety interlocks Interlock to lift up enclosure Dust extraction hoods outlet diameter 150 mm Toolkit Instruction and maintenance manual, electrical diagram and parts list. Machine supplied with electrics arranged 3/50/415 V 1 no. CE Pressure Regulator Machine conforms to CE specification

Condition: excellent (used), Year of construction: 2010, Model Amada HFE M2 103t x 3110 3m, 8 axis Press Brake Year 2010 Very low hours Tonnage 100 tonnes Max. Bend Length 3110 mm Stroke Length 200 mm Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Oil Capacity 110L Motor Power Weight 6600 Kg Kedpezb Eg Refx Acponc Feissler machine mounted Laser guards ,side and rear interlocked fencing Dimensions Machine Length 4535 mm Machine Depth 2580 mm Machine Height 2680 mm Distance Between Side Frames 2705mm Beam width 60 mm Table height 960 mm Open Height 470 mm Throat Depth 420 mm