Used First Aid Kit for sale (3,814)

Condition: like new (used), Year of construction: 2022, Manufacturer: ROVETTA / AIDA Model: DFS-TE4-20000(2) 730-250 Press force: 2,000 tons Drive: SERVO Stroke: 800 mm Stroke rate: 50 rpm Ram adjustment: 400 mm Side opening: 3,650 mm Bolster area: 7,300 x 2,500 mm Ram area: 7,300 x 2,500 mm NORDA Transfer Pjdpfx Aox Idxmsh Uerf Transfer pitch: 0-1,250 mm Transfer opening min./max.: 700 - 2,740 mm Transfer stroke: 0-350 mm Millutensil coil line Material thickness: 0.5 – 3.0 mm Material width: max. 1,800 mm Decoiler load capacity: 20 tons

Condition: like new (used), functionality: fully functional, Kitagawa B-210 3-jaw chuck as new Shipping by parcel service is possible if costs are covered. Psdpsxl Dmvofx Ah Uorf

Condition: excellent (used), Year of construction: 2008, ram adjustment: 600 mm, pressing force: 2,000 t, stroke length: 700 mm, table length: 5,500 mm, table width: 2,500 mm, Type: Stamping press Manufacturer: Aida Model: S4-20000/5500x2500/LD-ET3 Nominal press force: 2000 ton SPM: 8-24 Nominal energy: 400 kJ Slide stroke: 700 mm Slide adjustment: 600 mm Open height: 1400 mm Clearance between uprights: 5970 mm Table dimensions: 5500 × 2500 mm Lower slide table dimensions: 5500 × 2500 mm Height of slide/ram carriage: 600 mm Opening in uprights: 3100 mm Main motor power: 250 kW Cushion force: 1500 kN Cushion stroke: 250 mm Press weight approx.: 390000 kg Normal slide rest position: Top Dead Centre Maximum flywheel speed: 421.6 rpm Maximum slide dimensions: 5500 × 2500 mm Max weight of upper die: 200 kN Power supply: 400 V, 50 Hz Minimum pneumatic supply pressure: 6 bar Hydraulic pressure in brake–clutch unit – min.: 68 bar Hydraulic pressure in brake–clutch unit – max.: 73 bar Transfer system: Transfer stroke: 0-1250 mm Maximum opening: 2500 mm Bar-closing stroke: 0-750 mm Lift stroke: 0-280 mm Internal clearance between closed bars: 1000 mm Psdpfx Ahox Ifrzj Ujrf Pass-line height relative to bolster: 580 mm

Condition: used, A total of 3 sets of soft, pre-turned top jaws are being offered. The price listed above applies to one set of chuck jaws. ----- Jaw interface: Serration 1.5 x 60° Pedpsk Un Siefx Ah Uorf Chuck types: Kitagawa; Howa; B210; BB210; other Asian manufacturers Chuck size: 10" approx. ø 250 mm For example: HOWA 10", Auto Strong 10" Slot N = 16 mm Width B = 40 mm ----- Picture no. = Item no. Pos.1) 8035_10_09 → €25.00 per set Pos.2) 8035_10_10 → €25.00 per set Pos.3) 8035_10_11 → €25.00 per set ----- # Order - Shipping costs / per set €9.00 ----- Jaw dimensions: Width: 40 mm Height: 40 mm Length: 110 mm Hole spacing: La = 17+22 mm For fastening screws DIN 912 = M12 T-slot => N = 16 mm ----- T-nuts or other types of chuck jaws available on request.

Condition: new, 1230 pieces LOKITEC oil radiator electric heater This range of high-quality electric oil radiators from LOKITEC offers an efficient and comfortable heating solution for various living and working areas. With an impressive wattage and a variety of intelligent functions, these radiators provide pleasant warmth and maximum comfort. Certifications: All oil radiators are CE, ROHS and CB certified, ensuring their safety and quality according to international standards. These oil radiators offer an outstanding combination of performance, efficiency and comfort and are ideal for use in a variety of environments. With their robust construction and numerous functions, they are a reliable heating solution for cold winter days. Quantity: 1230 pieces New *RRP Total 190.510 € Unit price 65,04 € net Transport can be organized by us. Technical data and features: 1st LOKITEC oil radiator LK-K509M - 2000W Item number: KNSC20K509B Technical specifications Maximum wattage 2000W Voltage 220V - 240V / 50-60Hz Dimensions (cm) 46.8 x 15.8 x 66.5 Weight (kg) 10.7 VDE cable Heating levels 3 Heating elements 9 Oil channels 5 Overheating protection ✔️ Srqdjlvcw Adjustable thermostat ✔️ Frost protection function ✔️ ECO function ✔️ Timer ❌ Electrical control ❌ Prodpsu Nzztjfx Ah Usf Remote control ❌ Automatic thermal cut-out ✔️ Toggle switch ✔️ Signal lamp ✔️ SmartSnap wheels ✔️ Quantity 220 pieces RRP 129,- € 2nd LOKITEC oil radiator LK-K511M - 2500W Item number: KNSC25K511B Maximum wattage 2500W Voltage 220V - 240V / 50-60Hz Dimensions (cm) 54.5 x 15.8 x 66.5 Weight (kg) 12.6 VDE cable Heating levels 3 Heating elements 11 Oil channels 5 Overheating protection ✔️ Adjustable thermostat ✔️ Frost protection function ✔️ ECO function ✔️ Timer ❌ Electrical control ❌ Remote control ❌ Automatic thermal cut-out ✔️ Toggle switch ✔️ Signal lamp ✔️ SmartSnap wheels ✔️ Quantity 203 pieces RRP 149,- € 3rd LOKITEC oil radiator LK-Y409W - 2000W Item number: YOHX20K409B Maximum wattage 2000W Voltage 220V - 240V / 50-60Hz Dimensions (cm) 45.2 x 15.8 x 66.5 Weight (kg) 10 Cable VDE heating levels 3 Heating elements 9 Oil ducts 4 Overheating protection ✔️ Adjustable thermostat ✔️ Frost protection function ✔️ ECO function ✔️ Timer 24h - Programmable Electric control ✔️ Remote control ✔️ - WIFI + APP Automatic thermal shutdown ✔️ Toggle switch ✔️ Signal lamp ✔️ SmartSnap wheels ✔️ Quantity 110 pieces RRP 169,- € 4th LOKITEC oil radiator LK-Y411W - 2500W Item number: YOHX25K411B Maximum wattage 2500W Voltage 220V - 240V / 50-60Hz Dimensions (cm) 45.2 x 15.8 x 66.5 Weight (kg) 12 Cable VDE Heating levels 3 Heating elements 11 Oil ducts 4 Overheating protection ✔️ Adjustable thermostat ✔️ Frost protection function ✔️ ECO function ✔️ Timer 24h - Programmable Electric control ✔️ Remote control ✔️ - WIFI + APP Automatic thermal shutdown ✔️ Toggle switch ✔️ Signal lamp ✔️ SmartSnap wheels ✔️ Quantity 100 pieces RRP 189,- €

Condition: new, Year of construction: 2017, Kitakawa orginal 5 inch 3 jaw Large hole power chuck A2-8 direct spindle connection Predsm E Imzspfx Ah Uef condition new, never use. in stock include 3 soft jaws for spindle A2-8 new price 11.000

Condition: used, Standard Machine Specifications Table: Working surface: 305 x 305 mm Max. workpiece capacity: Ø 500 mm x 560 mm Max. table load: 250 kg Travel: X-axis: 510 mm Y-axis: 510 mm Z-axis: 490 mm Axis: 0.001° – 360° Distance from table top edge to spindle center: 40 - 550 mm Distance from table center to spindle nose: 100 - 590 mm Spindle: Spindle taper: NST No. 40 Speed: 20 – 20,000 rpm Drive: 4-stage gearbox (2 mechanical, 2 electric) Max. torque: 157 Nm Feed: Rapid traverse X, Y, Z-axis: 50,000 mm/min Rapid traverse 4th axis: 9,000°/min 90° rotation of the 4th axis: 0.6 seconds Cutting feed rate X-, Y-, Z-axes: 40,000 mm/min Tools: Tool positions: 40 Tool selection method: direct control, bidirectional Tool holder: BT (SK) 40 Max. tool diameter: 95 mm (150 mm if adjacent positions are empty) Max. tool length: 300 mm Max. tool weight: 10 kg Tool change time (tool-to-tool): 1.7 seconds Tool change time (chip-to-chip): 5.0 seconds Prodpfxov Si Sue Ah Ujf Motors: Spindle motor (30 min./continuous operation): 11.0 kW AC Tool changer motor: 400 W AC Cooling system motor: 1,200 W AC Pallet: Pallet change time: 6.0 seconds Other: Power supply: 25 KVA, 200 V AC, 3 phases Air supply: 5 bar, 330 l/min Dimensions: Machine height: 2,940 mm max. Footprint with chip conveyor: 3,492 mm x 3,173 mm Weight: 9,900 kg Control system: Fanuc 16iMB Standard machine accessories Spindle with 20,000 rpm and 4-speed gearbox (2-speed gear drive, 2-speed electronic gearbox) 2 spindle bearing compensation within 0.005 mm (IAC system 1) Big Plus spindle (contact in the taper and on the Front face) Automatic spindle cleaning with compressed air Coolant through spindle at 15 bar and its own pump Spindle bearing lubrication system (air-oil mixture) Spindle cooler Automatic lubrication of the X, Y, and Z axes Automatic high-speed tool changer with 40 tool stations Fixed tool location: each tool is coded independently of the machine and identified in the magazine Original Kitamura tool hold function through T-code pre-selection Automatic pallet changer, 180° reciprocating (2 stations) Coolant pump 1,200 W Double-deck chip conveyor with 2 chip conveyor belts for coarse and small chips, with filter system Chip flushing at the bottom with a separate 1,200 W pump Fully enclosed Enclosure Automatic central lubrication of the guideways Air FRL unit (filter, regulator, lubrication) Hydraulic power unit with tank Work light End of cycle lamp Compensating thread cutting 4 free M functions, M20 – M23 Pivoting control panel Portable handwheel RS 232C interface PCMCIA interface Door lock Emergency stop switch on the tool magazine Manual indexing switches on the tool magazine Self-diagnosis function

Year of construction: 2022, condition: as good as new (ex-display), functionality: fully functional, SYNC Nucleic Acids Extraction System (S032) Covid-19 Solutions/Auto Machine The SYNC Nucleic Acids Extraction System utilizes the unique characteristic of magnetic beads bonding with nucleic acid under a specific environment to purify the target nucleic acid samples. The purification protocol includes four basic steps: sample lysis, nucleic acid binding, wash and elution. Using SYNC Nucleic Acids Extraction System, the majority of nucleic acid purification processes will be done automatically and it dramatically reduces the human error and use the lab force much more efficiently. Using with the Geneaid Magnetic Beads Virus DNA/RNA Extraction Plate Kit, viral DNA/RNA such as SARS-COV-2, HBV, HCV and HIV would be automatically purified from nasopharyngeal swabs and plasma specimens. The purified viral DNA/RNA can be directly used for subsequent qRT-PCR detection. pecifications (Cat. # S032) Model Name: SYNC Nucleic Acids Extraction System Sample Processing: 1 - 32 samples per batch Reagent Type: Geneaid 96 well magnetic beads nucleic acid extraction plates Predpfx Asuvdnzeh Uof Control Interface: 10-inch touch panel Heat Block Temperature: Room temperature to 80°C Mixing Speed: 3 adjustable speeds Mixing Depth: Adjustable, based on reagent volume Collection Efficiency: 100 copies/ml Inter-WellPurification Accuracy: CV

Condition: like new (used), Year of construction: 2022, functionality: fully functional, ram adjustment: 400 mm, pressing force: 2,000 t, stroke length: 800 mm, table length: 7,300 mm, table width: 2,500 mm, Type: Stamping press Manufacturer: Aida Model: DSF-TE4-20000-730-250 Year of manufacture: 2022 Nominal press force: 2000 ton Energy at 15 spm: 630 kJ Energy at 28 spm: 390 kJ Strokes per minute: — full-revolution mode: 3–28 — endulum mode (at max. feed 105 mm): 3–50 Slide stroke: 800 mm Slide adjustment: 400 mm Maximum distance between slide and press table: 1200 mm Clearance between uprights: 7580 mm Slide dimensions: 7300 × 2500 mm Table dimensions: 7300 × 2500 mm Distance between side columns (front–back opening): 3650 mm Main motor power: 2 × 750 kW Slide-adjustment motor power: 30 kW Maximum upper die weight: 35000 kg Podpfxox Ifn Aj Ah Ujrf Normal slide rest position: Top Dead Centre Total stopping time at 15 strokes/min: 799 ms Safety distance: 1278 mm Safety brake pressure: 105 bar Power supply (three-phase): 400 V, 50 Hz Minimum pneumatic supply pressure: 5.5 bar Transfer system: Transfer stroke, forward (adjustable): 0–1200 mm Opening/closing stroke for each side (bar travel, adjustable): 0–1020 mm Lift stroke (adjustable): 0–350 mm Internal clearance between bars in closed position: 700 mm Maximum opening between bars (bars fully open): 2740 mm Bar section dimensions: 220 × 220 mm

Condition: used, Electric chain hoist, KITO WLL 240 Manulift crane Manufacturer: KITO Yamanashi, Japan Code No. EDC 24SD Serial No. Year of manufacture 2018 Load capacity 240 kg Hook travel 2 meters Distance from suspension to load hook 850 mm Lifting speed 3 to 12.9 m/min. Power supply 230 volts, 50 Hz Prodewbvmpjpfx Ah Uof - Cylinder handle control with potentiometer for speed adjustment - Safety limit switch - Emergency stop Weight 18 kg Very good condition

Condition: as good as new (ex-display), functionality: fully functional, The inclined conveyor belt is for sale and has the following dimensions; Of course, a BA is also available. Psdpfsvadvqjx Ah Uorf The conveyor belt is operated via 230 volts and can be changed from 1m/min-15 m/min by means of a frequency converter. L: 1600 mm NB: 200 mm GB: 290 mm FU : SEW

Condition: ready for operation (used), Year of construction: 2005, Main Drive Number of axis 3 Psdpfxsx D Rc Is Ah Uerf Movement X-Axis Movement 760 mm X-Axis Rapid Traverse 50 m/min Y-Axis Movement 455 mm Y-Axis Rapid Traverse 50 m/min Z-Axis Movement 460 mm Z-Axis Rapid Traverse 36 m/min Table Table load 200 kg This 3-axis Kitamura 3XiF was manufactured in 2005. It features a robust FANUC 16i-MB control system, a spindle speed of 10,000 rpm, and a BT-40 taper. The machine includes a chip conveyor with an extended neck and a 30-tool changer. Table size is 900 x 410 mm, supporting up to 200 kg. Ideal for precision machining with internal spindle cooling available. Contact us for more information about this machine. Application Types Milling

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Standard Specifications of the Machine Table: Working area: 305 x 305 mm Max. workpiece volume: Ø 500 mm x 560 mm Max. table load: 250 kg Travel: X-axis: 510 mm Y-axis: 510 mm Z-axis: 490 mm Rotary axis: 0.001° – 360° Distance table top – spindle center: 40 - 550 mm Distance table center – spindle nose: 100 - 590 mm Spindle: Spindle taper: NST No. 40 Spindle speed: 20 – 20,000 rpm Drive: 4-step gearbox (2 mechanical, 2 electric) Max. torque: 157 Nm Feed: Rapid traverse X, Y, Z-axis: 50,000 mm/min Rapid traverse 4th axis: 9,000°/min 90° rotation of 4th axis: 0.6 seconds Cutting feed X, Y, Z-axis: 40,000 mm/min Tools: Tool positions: 40 Tool selection: direct, bi-directional Tool holder: BT (SK) 40 Max. tool diameter: 95 mm (150 mm if adjacent positions are empty) Max. tool length: 300 mm Max. tool weight: 10 kg Tool change time (tool-to-tool): 1.7 seconds Tool change time (chip-to-chip): 5.0 seconds Motors: Spindle motor (30 min./continuous operation): 11.0 kW AC Tool changer motor: 400 W AC Coolant system motor: 1,200 W AC Pallet: Pallet change time: 6.0 seconds Other: Power supply: 25 kVA, 200V AC, 3-phase Air supply: 5 bar, 330 l/min Dimensions: Machine height: 2,940 mm max. Footprint with chip conveyor: 3,492 mm x 3,173 mm Weight: 9,900 kg Control: Fanuc 16iMB Standard Accessories Spindle with 20,000 rpm and 4-step gearbox (2-speed gear drive, 2-speed electronic gear) 2-Point spindle bearing compensation within 0.005 mm (IAC System 1) Big-Plus spindle (contact in taper and face) Automatic spindle taper cleaning with compressed air Through-spindle coolant at 15 bar with separate pump Spindle bearing lubrication system (air-oil mixture) Spindle cooler Automatic lubrication of axis ballscrews in X, Y, and Z axes Automatic high-speed tool changer with 40 tool stations Fixed tool position: each tool is independently coded by the machine and identified in the magazine Original Kitamura tool wait-release function via pre-selection of the T-code Automatic 180° pallet changer (2 stations) Coolant pump 1,200 W Double-deck chip conveyor with 2 chip belts for coarse and fine chips, with filter system Lower chip flushing with separate 1,200 W pump Fully enclosed guard Automatic central lubrication of guideways Air FRL unit (filter, regulator, lubrication) Hydraulic power unit with tank Work light Cycle end lamp Tapping without compensating chuck 4 free M-functions, M20 – M23 Swiveling control panel Portable handwheel RS 232C interface PCMCIA interface Door interlock Emergency stop at tool magazine Manual index switches at tool magazine Pedpfx Ajw Al Tboh Usrf Self-diagnostic function

Condition: used, Year of construction: 2000, overall weight: 260 kg, table diameter: 70 mm, Rotary Table Table diameter 250 mm Spindle bore Ø 70 mm Weight 260 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Psdpfx Aexftm Ejh Uorf Feel free to view our other advertisements for a complete overview of our stock.

Year of construction: 2017, condition: like new (used), Maidaid utensil washer Model: U61HE Serial: 4319123 2017, stainless, extra tall heavy duty free-standing dishwasher for pots and utensils. 790mm useable height. 500 x 610mm baskets Prodpfsha U Etex Ah Uef

Condition: used, Electric chain hoist, electric chain block, crane KITO type WLL 240 Manulift Manufacturer: KITO Yamanashi Japan Code No. EDC 24SD Serial No. Year of manufacture 2017 Load capacity: 240 kg Hook travel: 2 meters Distance from suspension to load hook: 850 mm Lifting speed: 3 to 12.9 m/min Mains connection: 230 Volt, 50 Hz - Cylinder handle control with potentiometer for speed adjustment - Safety lifting limit switch - Emergency stop Weight: 18 kg Pedetqgn Djpfx Ah Uerf Very good condition

Condition: repair required (used), Year of construction: 2003, operating hours: 926 h, functionality: limited functionality, travel distance X-axis: 760 mm, travel distance Y-axis: 455 mm, travel distance Z-axis: 460 mm, controller manufacturer: Fanuc, controller model: 16iM, table width: 410 mm, table height: 900 mm, rotational speed (max.): 15,000 rpm, We are selling our Kitamura numerically controlled machining center, model MY-3Xi, with FANUC 16iM CNC control system. Psdpfx Ahexzqgue Uerf The machine is out of operation; tool changer must be referenced. Year of manufacture: 2003 Travel: 760x455x460mm Tool magazine positions: 30 Spindle speed: 15,000 rpm Spindle taper: (BIC-PLUS) ISO/BT40 2-stage gearbox Table size: 410x900mm Control on-time: 38,746 h Milling time: 926 h Remarks: - The price does NOT include any accessories! - Pickup by the buyer, ex works. - Pickup date to be arranged with the seller. - No warranty - Advance payment (invoice) or cash payment on collection

Condition: ready for operation (used), Year of construction: 2008, Control Unit Brand FANUC Model 16 i MB Movement X-Axis Rapid Traverse 50 m/min Y-Axis Rapid Traverse 50 m/min Z-Axis Rapid Traverse 50 m/min X-Axis Movement 735 mm Psdpfx Ajx D Ntxoh Ujrf Y-Axis Movement 610 mm Z-Axis Movement 610 mm This Kitamura HX500 ia was manufactured in 2008. It features X-Y-Z Axis Travels of 735, 610, and 610 mm, a table size of 500x500 mm, and a spindle speed of 13,000 rpm. The machine includes a BT40 spindle mount, a 50-position tool changer, and a FANUC 16 i MB control system with a 10.4" color LCD. Consider the opportunity to buy this Kitamura HX500 ia horizontal machining centre. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 40543, travel distance X-axis: 425 mm, travel distance Y-axis: 425 mm, travel distance Z-axis: 400 mm, overall weight: 8,500 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 100, TECHNICAL DETAILS X-axis: 425 mm Y-axis: 425 mm Z-axis: 400 mm Pallet size: 300 x 300 mm Feed Rates Rapid traverse: 36,000 mm/min Cutting feed rate: 0–10,000 mm/min Tool Magazine Capacity: 100 ATC Spindle speed: 10,000 rpm Tool diameter: 95 mm Maximum tool length: 350 mm Maximum tool weight: 10 kg Max. tool weight (with tool holder): 10 kg Tool change time: 1.7 s Chip-to-chip time: min. 7 s Control: Fanuc 15M Pallet indexing: Full 4th axis Podpfx Ahjxnwkge Usrf MACHINE DETAILS Installation dimensions: approx. 3,690 x 4,614 x 2,475 mm Transport dimensions of the machine: 2.4 x 3.80 x 2.8 m Connected load: 20 kVA Phases: 3 Frequency: 50/60 Hz EQUIPMENT - Chip conveyor - Through-spindle coolant Note: The robot is equipped with 40 pallets. Spare pallets are also available.

Year of construction: 2017, condition: excellent (used), functionality: fully functional, Manufacturer: MEKITEC Finland Type: X-ray inspection system for food products Year of manufacture: 2017 Last used in the milk powder industry MEKITEC X-ray Inspection System – Maximum Product Safety for the Food Industry Enhance your production quality assurance with a MEKITEC X-ray inspection system – the reliable solution for detecting foreign objects and product defects in food processing. The compact system combines top detection performance with energy-efficient technology, making it ideal for all types of packaging lines. ✅ Detection of metal, glass, stone, bone, plastic, and other foreign materials ✅ Hygienic design in accordance with food standards ✅ Easy operation and integration into existing production lines ✅ Reduces waste and ensures brand quality Prjdpfx Ajxq E Dyjh Uef

Condition: good (used), Code: 0230 Brand: MAKITA Model: 5603R - CE Standard Circular saw with case for cutting wood, plastic, aluminum, and various materials - CE Standard Technical data: Blade diameter mm 165 Motor 1100 W single-phase Rpm 5000 Max cutting depth at 90° mm 54 Max cutting depth at 45° mm 38 Weight kg 4,9 Pedpjxn Stcsfx Ah Uorf Transport not included

Condition: used, Electric chain hoist, KITO crane type WLL 240 Manulift Manufacturer: KITO Yamanashi Japan Code no.: ED 24ST Serial no.: Year of manufacture: 2008 Load capacity: 240 kg Hook lift: 2.7 meters Distance suspension to load hook: 950 mm Lifting speed: 3 to 12.9 m/min Power supply: 230 Volt, 50 Hz - Cylinder handle control with potentiometer for speed adjustment - Safety upper limit switch - Emergency stop Weight: 18.5 kg Pedpfxeu Invue Ah Ujrf In very good condition

Year of construction: 2015, condition: ready for operation (used), An X-ray inspection device Mekitec for the food industry is available. Measurement device type: Rad Eye B20, max. power: 60kV/1.66mA/100W, method: inline inspection, test object: packaged food products, tunnel clearance X/Y: approx. 250mm/100mm, belt length: 1200mm, belt width: 250mm, max. belt speed: 1.3m/s, max. product weight: 5kg, machine dimensions X/Y/Z: approx. 2000mm/550mm/1200mm, weight: approx. 100kg. Documentation available. An on-site inspection is possible. Pedpfx Ahexnp Scs Uerf

Condition: excellent (used), functionality: fully functional, Rotary table gearbox with tailstock Rotary table:KITAGAWA TR630H2E04 Tailstock: KITAGAWA TS 630 RN Psdpfxowhmdlj Ah Uerf

Condition: excellent (used), Year of construction: 2008, conveyor belt length: 2,250 mm, conveyor belt width: 600 mm, Equipment: type plate available, Stock No.: 503508 Machine/Equipment Type: Conveyor Belt Manufacturer: MK Maschinenbau Kitz GmbH Model: GUF-P 2000 AF 2550-600 Pedpouiwrrofx Ah Usrf Year of manufacture: 2008 - Belt conveyor for light and medium-weight conveyed goods. Flat conveyor belt: Belt width: 600 mm Belt length: 2250 mm Load capacity: 75 kg