Milling machine

TOS Zebrák FNGJ 32

Condition: used, Year of construction: 1975, Technical details: turning diameter over bed: 500 mm turning diameter over support: 260 mm turning length: 950 mm center height measured in bed: 220 mm centre distance: 1000 mm revolution per minute: 11,2 - 2240 / 24 step U/min spindle bore of work spindle: 62 mm tailstock quill adjustment:: 210 mm longitudinal feeds:: 0,045 - 1,6 mm/U - 32 step cross feed: 0,02 - 0,71 mm/U - 32 step total power requirement: 11 kW weight of the machine ca.: k.A. t dimension machine xH: 3,3 x 1,2 x 1,6 m The machine is in a very good condition (very quiet spindle run) in Leipzig. Top slide rotatable 360° 3-jaw lathe chuck Ø 315mm with jaws (inside/outside) for speed 2000 rpm. Thread cutting: metric, modular thread, inch Chip protection wall Chuck protection (mechanical) MULTIFIX steel holder with Ø 40mm drill steel holder Chip collection tray Coolant supply with pump Protective device for lead screw Machine base UVV is pre-equipped ( UVV=Accident Prevention Regulations) Pjdpfx Aev A Sqhsdiogw *

Year of construction: 1999, condition: excellent (used), BARREL NEW Pgedpfx Aolqw I Iedisw CORRECT TRUCK REGISTERED

Condition: used, Year of construction: 1990, x-travel 0500 mm y-travel 400 mm Pgsdpfxju Rt Nxo Adiew z-travel 400 mm table-size 680 x 380 mm CNC control 432 PHILIPS feed range 1-3000 mm/min rapid traverse 6 m/min Tool bore ISO 40 turning speed range 20 - 3150 U/min main drive DC 5 kW milling head -swivable +/- 90 ° total power requirement 12 kW weight of the machine ca. 1,2 to dimensions of the machine ca. 2,5 x 2 x 2 m CNC milling machine with 432 Control.

Condition: used, Year of construction: 1988, x-travel 0600 mm y-travel 450 mm z-travel 450 mm quill stroke 80 mm table-size 1000 x 400 mm spindle turning speed range 20 - 3000 U/min spindle taper SK 40 feeds - automatic programming 1 - 4000 mm/min rapid traverse 6 m/min control Philips 432 Pjdpfx Asu Rt I Isdiegw power capacity 12 kW total power requirement 15 kW CNC control Philips 423, V-head swivelling, coolant pump, hydraulic tool clamping, autom. central lubrication, machine light, with protection cabin, diverse accessories.

Condition: like new (used), Year of construction: 2012, operating hours: 6,589 h, functionality: fully functional, We are selling a beautiful POSMILL E1100 machining center, built in 2012. The machine has few spindle hours (6,589) and was used for single-part production. The machine is ready for demonstration with power at the delivery point. Technical specifications: X-axis 1,100 mm Y-axis 600 mm Z-axis 510 mm Spindle/table distance 120-630 mm Table dimensions 1,300 x 600 mm ITNC 530 control system Pedpfxjwkhy Ts Adijgw - ITNC 530 control system - 35.1 tool measurement system - Workpiece measurement system with probe - Linear measuring system in all axes - Internal coolant supply for internal machining - Various tools with holders - Chip conveyor - Filter system - Workshop trolley with holder - Vice

Condition: good (used), Year of construction: 2002, Manufacturer: BRÜCK Tip: 12/1600 Load capacity: 12000 kg Max sheet width: 1600mm Coil diameter: 1800mm Weight : cca 14 t Without control cabinet! Pgjdpfxjhrnbko Adiow

Condition: new, Machine in stock and immediately available Double Mitre Metal Band Saw S 255 DG Cutting capacity round / square 90°: 255 mm / 210 x 210 mm Cutting capacity flat 90°: 310 x 210 mm Cutting capacity round / square 45°, right: 220 mm / 210 x 210 mm Cutting capacity flat 45°, right: 220 x 200 mm Cutting capacity round / square 45°, left: 230 mm / 200 x 200 mm Cutting capacity flat 45°, left: 230 x 200 mm Cutting capacity round / square 60°, right: 135 mm / 135 x 135 mm Cutting capacity flat 60°, right: 135 x 135 mm Saw blade dimensions: 2750 x 27 x 0.9 mm Cutting speeds: 35 / 70 m/min Motor output S6 40%: 2.2 kW Working height: 930 mm Features: - Double mitre saw with swivelling saw bow from left -45° to right +60° - Ideal for machining pipes, profiles, and solid materials made of stainless steel, iron, etc. in commercial applications - Generously sized, cast saw arm for low-vibration operation - Two band speeds for optimal adaptation to the workpiece - Hydraulic lowering cylinder - Quick-release vice for fast, easy clamping of workpieces - Precise, adjustable saw blade guide for optimal cutting results - CE/IEC certified, German documentation and German service Scope of delivery: - Saw blade - Material stop - Pressure gauge (band tension) - Carbide saw blade guides Psdpfx Aded R Sipsijgw - Quick-release vice - Integrated coolant system - Hydraulic bow lowering - Motor protection switch - Automatic end stop - Base frame

Condition: reconditioned (used), Year of construction: 1992, functionality: fully functional, center height: 150 mm, grinding length: 620 mm, center width: 680 mm, grinding wheel diameter: 350 mm, total width: 500 mm, Condition of the machine: The machine is currently in a used, non-overhauled condition. The following work carried out on the machine: - Complete disassembly of the entire machine except for the guides - Replacement of all sealing and wear parts of the entire machine - Replacement of the infeed spindle of the X-axis - Replacement of the main bearing of the workpiece spindle - Replacement of grinding spindle - All machine assemblies are restored to as-new condition Geometry: - Scraping of the X-axis guide - Scraping the Z-axis guide Pgsdjrz Nflopfx Adiow - Grinding the X-axis table - Grinding the Z-axis table - Grinding the upper tables - Grinding of the assembly housing (workpiece headstock, grinding headstock and tailstock) - Creation of measurement report for TSCHUDIN cylindrical grinding machine Painting: The main assemblies are repainted, the rest of the machine retains the original paintwork Electronics: The complete electronics of the machine are checked, tested and defective switches and cables are replaced

Condition: like new (used), functionality: fully functional, Weiler center lathe model Condor B lead and feed spindle lathe with 3-axis digital readout from K&C NEW Geometrically overhauled with acceptance certificate for tolerances of new machines !!! Technical data: >> Machine no. 90-1495 >> Center height 165 mm >> Center width 750 mm >> Spindle speed : from 22 to 2800 rpm >> Spindle clearance 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feed rates from 0.015 to 0.46 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake can be activated >> Length 1.83 m, height 1.29 m, depth 0.88 m Accessories and equipment: >> 3-axis digital readout from K&C New , 12 months manufacturer's warranty with operating instructions Functions : Switching mm/inch , Coordinate selection ABS/INC , Halving of the display value , Reference mark , Tool programming 200 pcs. , Cone calculation , Radius / diameter , Quick zeros , Switching the counting direction , Pedpfjvambcex Adiegw >> Collet chuck device, collets NEW from 3 to 26 mm 1 mm increasing >> Three-jaw chuck 160 mm with 2 sets of jaws NEW >> Mulifix new size A with 2 steel holders new >> Bed stop >> elec. Chuck guard NEW >> Machine lamp LED New >> Rear panel >> Operating instructions >> Coolant device >> Machine feet To the machine : We are offering a Weiler Condor B lead and feed spindle lathe in a geometrically overhauled condition, absolutely as good as new. The guides are newly ground and scraped. With acceptance according to test protocol. A very nice machine with electronic spindle protection. The accessories collets, chuck, Multifix are new. Spindles, spindle nuts, bearings, belts, wipers have been renewed. Take the opportunity to inspect this machine on site under power and see the condition for yourself.

Condition: used, Landonio TMU 1200 Lathe Pjdpsizxvkefx Adisgw