Used Foot Press for sale (14,431)

Condition: reconditioned (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 05/2027, type of input current: three-phase, year of last overhaul: 2026, Record Roll Press Semi-Automatic for consistent quality! Dividing head NEWLY redesigned Stainless steel knives NEW simple, robust engineering! with 3 forming plates only from us: DGUV V3 tested Connection: 400V, 16A-CEE plug Dimensions: 520 x 500 x 1200 mm (WxDxH) Pjdpfx Ajy Ebkbedlspr Refurbished used machine, SAB inspected with warranty & spare parts service Visit our large showroom!

Condition: repair required (used), Year of construction: 1990, Old laminating press offered for sale to the highest bidder. Podpfxjy D A Hue Adljpr

Condition: good (used), Year of construction: 2012, Condition: 2012 overhauled to the latest UVV Installation height: 800 mm Ram stroke: 500 mm Projection: 360 mm Nominal force: 400 kN Hydraulic pressure: 160 bar Operating hours: 1356 Ppedpfxjy H Idde Adlor Other: new control from Pilz, electrical circuit diagrams available Video about functionality available

Condition: good (used), Maximum pressing force 10 tons. Working pressure 16 MPa Cylinder stroke 400 mm Down speed 100mm/sec Speed up to 450 mm/sec Power requirement 5.2 kW Weight 1.3 tons Podpoy H Icasfx Adlepr Clamping table changed! Not an original table!

Condition: good (used), Year of construction: 2006, Press force: 135 t Bending length: 2550 mm Frame gap: 2050 mm Control system: CYBELEC ModEva 10 S Total power requirement: 25 kW Machine weight approx.: 11,000 kg Description Machine: – Rigid machine frame as an all-steel welded construction – Ram with high flexural rigidity – Electrohydraulic top drive via proportional valves – Modern block hydraulics Special equipment: – Increased installation height and stroke by 150 mm each – Rear gauge system 2 – 2 axes, R axis adjustment 150 mm – 2 x additional backgauge fingers 2/4 axes, however offset by 20 mm – CNC sheet support device – Distance from bending line to sheet support device approx. 240 mm Psdpfx Adey H Ilbeljpr – EHT quick-release clamping system for EHT upper tools, pneumatic, head width 26 mm, horizontally self-centering – EHT lower tool clamping, receiving width 55 mm, pneumatic – Hardened insert strip for EHT lower tool clamping 55 mm / 90 mm – CNC-controlled die shifting, stepless – CNC crowning system in the table (minimum table width 110 mm), without tool clamping – Safety device SICK V4000 – 2 x bending aids max. 1500 N – 2 x 2 support rails for bending aid with 14 mm T-slot and scale – 2 x table extensions for bending aid – Park position right and left, short

Condition: excellent (used), Year of construction: 2018, Pressure: 170 t Bending length: 3050 mm Distance between uprights: 2550 mm Stroke: 400 mm Machine weight approx.: 15,300 kg Podpfx Ajy H Ia Ejdlepr Machine: – Sturdy machine frame – Press beam – Spherical mounting of the press beam with adjustable inclination – Electrohydraulic upper drive – Integrated hydraulic block system – Length measuring system (Y-axis) with dynamic spring-back compensation – Control cabinet air conditioning unit – Tool holder adapter rail – 2 backgauge fingers Special equipment: – 2-axis backgauge (XM/XS, R) – 1 CNC sheet metal support device, 200 daN – 2 additional backgauge fingers, 2/4-axes – 1 pneumatic upper tool clamping, 26 mm – 1 pneumatic lower tool clamping, 55 mm – 1 pneumatic lower tool displacement EHT – 1 CNC crowning system 3000 kN/m – 1 operator safety guard PILZ PSENvip Productivity – 2 bending aids, 1500 N – 1 support bars for bending aid – 1 parking position right, short – 1 special function: fast hemming

Condition: good (used), Year of construction: 2003, Press force: 50 t Bending length: 1550 mm Distance between uprights: 1150 mm Control: CYBELEC DNC 1200 PS Eco Throat depth: 405 mm Table height: 900 mm Ram stroke: 400 mm Distance table/ram: 720 mm Total power requirement: 9.5 kW Machine weight approx.: 5,200 kg Space requirement approx.: 2000x1900x2920 mm Description Equipment: - Quick clamping system for upper tools - Side and rear guards with access door - 2 front sliding support arms, 800 mm length - Laser optical safety system - CYBELEC DNC 1200 PS – ECO control Rear gauge – System 1 - Optimized finger geometry - 2 workpiece support levels for larger back gauge dimensions - 2 axes (X-R) - Electric depth adjustment (X-axis) - Electric height adjustment (R-axis) - Manually adjustable stop fingers - Pneumatic clamping operated by push button at the control panel Pedpey H H Tksfx Adlopr - 2 additional offset stop fingers Lower tool clamping system - Centering bar * with pneumatic quick-release system - Infinitely variable die shift (MVX) * Shifting via X-axis of the back gauge - Any positions freely selectable

Condition: used, Year of construction: 1991, Plate size: 3600 x 1350 mm Total pressing force: 160 t Specific pressing force: 3.5 - 5.0 kg/cm² Max. operating pressure: 320 bar Press cylinders: 8 x 90 mm St/DM Opening width: 400 mm Weight approx.: 8,300 kg Dimensions: 4130 x 1520 x 2150 mm Function tested = new cover plates (gold anodized) Storage location: Supplier Psdpfx Adey Hrzmoljpr

Condition: good (used), Year of construction: 2004, Used Safan E Brake press brake Type: E Brake 50 2050 HS TS1 Capacity: 2050 x 50 ton Ppodpfoyykk Hox Adlor WIla clamping with 1 set of tools TS1 CNC control Y1, Y2, X, R, Z1 and Z2 CNC controlled HS High Speed version

Condition: good (used), Year of construction: 2003, Used 2.5 meter press brake from Ermaksan Model: AP 2600 60 Capacity: 2600 x 60 tons Elgo NC control 1 set of tools Pedpsyykkmefx Adlopr Year of manufacture: 2003

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, controller manufacturer: Bystronic, controller model: Byvision, bending force (max.): 225 t, control type: CNC control, number of axes: 6, type of crowning: CNC-controlled, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, safety light barrier, upper tooling, 1 Used High quality fully serviced Bystronic Xact Smart 225/4100 4metre x 225ton hydraulic downstroke cnc pressbrake for sale Xact Smart 225/4100 Make: Bystronic Model: Xact Smart 225/4100 Year / new: 2016 Total axis: 6 – 4axis back gauge X R Z1 Z2 Hydraulic crowning Free standing no pit required Capacity / bed size / tonnage: 4metre x 4100mm x 225ton Ppedpfxsyxqzve Adlsr Cnc control: ByVision touch screen

Condition: ready for operation (used), Year of construction: 2019, machine/vehicle number: 83966, functionality: fully functional, pressing force: 150 t, TECHNICAL DETAILS Pressing force: 150 t Psdpfx Aeyykvpsdljpr MACHINE DETAILS Machine weight: 9,500 kg EQUIPMENT Fastbend 2D control on Y1, Y2 and X axes Euro tool clamping A complete set of tools

Condition: used, working width 350 mm working length 5.100 mm hollow 210 mm Solid hydraulic beam press Bürkle type HS 1/90 35/510 for gluing timber, beams or other pressing tasks. Heating plates without function. Ppodpfxey Eryyj Adlor Including replacement cylinders as good as new.

Condition: used, working width 750 mm working length 3.000 mm length ~ 3.850 mm width ~1.000 mm Ppsdpfx Ajy Erymjdler height ~ 2.000 mm Hydraulic veneer press Ott type 300 K75 for gluing veneers, timbers, beams or other pressing tasks. Heating plates without function.

Condition: like new (used), functionality: fully functional, Year of construction: 2026, container length: 10 ft, For sale: Like-new 10-foot containers 🇩🇪🚨 These containers have barely been used and are in excellent technical and visual condition, almost as good as new. Condition & Features: ✅ Wind- and waterproof ✅ Robust steel construction ✅ Smooth-running double doors with original locking system ✅ High security with heavy-duty door rods ✅ Floor is dry, clean, and highly load-bearing Technical specifications: External dimensions: 2,991 x 2,438 x 2,591 mm (L x W x H) Internal dimensions: approx. 2,831 x 2,352 x 2,390 mm (L x W x H) Volume: approx. 15.9 m³ Tare weight: approx. 1,200 - 1,330 kg We also offer 8-foot containers! Feel free to contact us! Possible uses: Storage container for tools, machinery, or materials Construction sites, businesses, or private use Gardens, courtyards, clubs, or workshops Also ideal as a base for conversions (workshops, storage, tiny house projects) Pedpfx Adjwu Unlelopr 🚚 Delivery available by arrangement! If you're interested, just get in touch – I reply quickly and reliably. 👍

Condition: good (used), Year of construction: 2018, functionality: fully functional, Baler Presona LP 85 VH2 with cross tying, year of construction 2018 Technical data: Manufacturer: Presona Sweden Model: LP 85 VH2 Year of construction: 2018 Drive power: 2 x 45 kW Operating hours: 40,350 Effective operating hours: approx. 22,000 Pre-press force: 28 t Main press force: 85 t Feed opening: 1500 x 1100 mm Bale dimensions: 750 x 1100 mm Bale weight: 450 - 650 kg Theoretical throughput: 1,200 cbm/h Throughput at 30–100 kg/cbm: 13–30 t/h Tying: 5-fold vertical, 3-fold horizontal Oil tank volume: 2,000 L Transport dimensions of press: 10,400 x 2,400 x 2,800 mm (LxWxH) Weight: approx. 27,000 kg The baler was dismantled from running operation. Technical documentation is available. Please note: All technical data is based on manufacturer’s specifications. We accept no liability for the accuracy of the information provided or for possible errors. Pedpfx Adjyz Snpsljpr The offer is subject to change, prior sale reserved, and can be revoked at any time. Inspections are possible by prior arrangement. Sale is ex works, payment in advance, without warranty or guarantee.

Condition: ready for operation (used), Year of construction: 1979, functionality: fully functional, Baler Paal Pacomat II, Year of Manufacture 1979 Technical Specifications: Manufacturer: Paal Model: Pacomat II Year of Manufacture: 1979 Drive Power: 11 kW Pressing Force: 27 t Channel Cross Section: 700 x 1000 mm Podpsyz Salsfx Adlspr Filling Opening: 1000 x 650 mm Throughput: approx. 60/115 m³/h Bale Size: 700 x 1000 mm Bale Weight: up to 400 kg Machine Dimensions: approx. 7000 x 2000 x 2000 mm (LxWxH) Machine Weight: approx. 5200 kg Materials: Paper, Cardboard, Film Remarks: The machine is in fully functional condition. It has been inspected and tested at our site in 28816 Stuhr. You can find the video on our website or our YouTube channel. Viewings, including under power, are possible at any time by appointment. Please note: All technical details are based on information provided by the manufacturer. We accept no liability for the accuracy or possible errors. Offers are subject to change, prior sale reserved, and may be revoked at any time. Viewings are possible by prior arrangement. Sale is ex works, without warranty or guarantee. Our payment terms require 100% advance payment.

Condition: good (used), Year of construction: 2000, operating hours: 28,155 h, functionality: fully functional, Baler Paal Konti 200 D, Year of Manufacture 2000 Technical Data: Pjdpfsyz R Uuox Adljpr Manufacturer: Paal Model: Paal Konti 200 D Year of manufacture: 2000 Operating hours: 28,155 Pressing force: 60 t Drive power: 45 kW Total connected load: 60 kW Feed opening: 1020 x 1400 mm Bale dimensions: 750 x 1100 mm, length variable Tying: 4-fold automatic Throughput performance at: 35 kg/m³ approx. 9.5 t/h 60 kg/m³ approx. 16.5 t/h 100 kg/m³ approx. 26 t/h Bale weight: 450 to 650 kg Transport dimensions: approx. 10,123 x 2,152 x 2,720 mm (LxWxH) Machine weight: approx. 15,000 kg Materials: Paper, Cardboard, Film The baler is in good condition and has been checked and tested. A video is available on our website or YouTube channel. Complete documentation is available. Please note: All technical data is based on manufacturer’s information. No liability is accepted for the data provided or for potential errors. The offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by appointment. Sale is ex works, advance payment only, without warranty or guarantee.

Condition: good (used), Year of construction: 2019, operating hours: 1,022 h, functionality: fully functional, Baler Presto CC 20 M, Year of Manufacture 2019 Technical Data: Manufacturer: Presto Model: CC 20 M Year of Manufacture: 2019 Operating Hours: 1,022 Pressing Force: 20 t Cycle Time: 24 s Drive Power: 7.5 kW Filling Opening: 1030 x 750 mm Filling Volume: 0.53 m³ Tying: 3-fold, manual Throughput capacity at bulk density of: 35 kg/m³ - 1.6 t 60 kg/m³ - 2.3 t 100 kg/m³ - 2.8 t Bale Dimensions: 700 x 750 mm Bale Weight: up to 300 kg Dimensions: 3300 x 1235 x 1860 mm (LxWxH) Machine Weight: approx. 2,500 kg Materials: Paper, Cardboard, Film Remarks: The machine is in good condition. It has been inspected and tested at our facility in 28816 Stuhr. A video is available on our website or our YouTube channel. Please note: All technical data is based on manufacturer information. We accept no liability for the details provided or any possible errors. Podpfxeyz R S Ho Adlopr Offers are subject to change, prior sale reserved, and can be revoked at any time. Inspection is possible by appointment. Sale is ex location, without warranty or guarantee.

Condition: good (used), Year of construction: 2017, operating hours: 1,640 h, functionality: fully functional, Baler Presto CC 40 M, Year of manufacture: 2017 Technical Specifications: Manufacturer: Presto Model: CC 40 M Year of manufacture: 2017 Pressing force: 40 t Cycle time: 34 s Drive power: 15 kW Feed opening: 1080 x 1100 mm Feed volume: 0.85 m³ Binding: 4-fold, polyester strapping, manual Throughput rate at bulk density of: 35 kg/m³ - 1.8 t/h 60 kg/m³ - 2.5 t/h 100 kg/m³ - 3.1 t/h Bale size: 750 x 1100 mm Bale weight: 400 kg Ppodpjyz R Hqsfx Adler Dimensions: 3650 x 1590 x 2010 mm (LxWxH) Machine weight: approx. 3,800 kg Materials: Paper, cardboard, film The baler is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. Operating instructions and CE declaration are available. Note: Channel discharge is fully automatic and regulated. Please note: All technical data is based on the manufacturer's information. We do not accept liability for the information provided or any possible errors. This offer is non-binding, subject to prior sale, and may be revoked at any time. Inspections are possible by appointment. Sale is ex-works, prepayment required, without warranty or guarantee.

Condition: good (used), Year of construction: 2014, operating hours: 7,145 h, functionality: fully functional, Channel Bale Press Presto HPK 50 HS, Year of Manufacture: 2014 Manufacturer: Presto Model: HPK 50 HS Year: 2014 Drive Power: 30 kW Pressing Force: 50 t Operating Hours: 7,145 Feed Opening: 1600 x 650 mm (LxW) Channel Cross-Section: 700 x 950 mm Max. Filling Volume: 1.06 m³ Cycle Time: 20 s Tying: 4-fold Throughput Performance at 35 kg/m³: 5.5 t/h 60 kg/m³: 8.8 t/h 100 kg/m³: 12.7 t/h Bale Weight: up to 500 kg Machine Dimensions: 8420 x 1900 x 2400 mm (LxWxH) Machine Weight: approx. 10,500 kg Materials: Paper, Cardboard, Film, PET bottles Podpfx Adeyz R Eyjljpr Note: All knives and counter-knives as well as all sliding plastics have been replaced. The press is in good condition and has been checked and tested. A video is available on our website or YouTube channel. The operating manual and CE declaration are included. Please note: All technical data is based on information provided by the manufacturer. We do not assume liability for the information provided or for possible errors. This offer is subject to change, prior sale, and can be revoked at any time. Inspections are possible by prior arrangement. Sale is made against advance payment, ex works, without warranty or guarantee.

Condition: good (used), Year of construction: 2015, operating hours: 1,932 h, functionality: fully functional, Baler Presto CC 50 M, semi-automatic, year of manufacture 2015, with lift-and-tilt device Ppsdjyz R Etspfx Adler Technical Specifications: Manufacturer: Presto Model: CC 50 M Year: 2015 Operating hours: 1,932 Pressing force: 50 t Cycle time: 52 s Drive power: 7.5 kW Filling opening: 1030 x 1100 mm Filling volume: 0.85 m³ Tying: 3-fold, wire, manual Throughput depending on bulk density: 35 kg/m³ – 1.3 t 60 kg/m³ – 1.7 t 100 kg/m³ – 2.2 t Bale dimensions: 750 x 1100 mm Bale weight: 300 kg Dimensions: 4705 x 1680 x 2540 mm (LxWxH) Machine weight: approx. 4,000 kg Materials: Paper, cardboard, film The operating manual is available in German. Note: The machine is in good condition. It has been inspected and tested at our premises in 28816 Stuhr. The video is available on our website or YouTube channel. Please note: All technical data is based on information from the manufacturer. We accept no liability for the details provided or for any possible errors. Subject to prior sale; offer is non-binding and may be revoked at any time. Inspections are possible by arrangement. Sale is ex works against advance payment, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2016, operating hours: 12,730 h, pressing force: 170 t, stroke length: 445 mm, throat depth: 420 mm, overall weight: 12,500 kg, Hydraulic Press Brake Manufacturer: TRUMPF Model: TruBend 5170 Excellent condition, year of manufacture 2016 Technical Specifications - Manufacturer: TRUMPF - Model: TruBend 5170 - Year of manufacture: 2016 - Usable bending length: 3230 mm - Pressing force: 170 t - Weight: 12,200 kg - Connected load: 28 KVA - Free clearance between frames: 2690 mm - Throat depth: 420 mm - Table width: 180 mm - Installation height: 615 mm - Stroke: 445 mm - Upper tool height: 110–390 mm - Closing speed of ram: 220 mm/s - Dimensions (LxWxH): 4250 x 2050 x 3000 mm Equipment: Ppjdjy Hbxnepfx Adljr - Controller: TRUMPF TASC 6000, 15" TFT screen - Interfaces: parallel, RS 232, USB, Ethernet - 2 movable support arms - 1 CNC-controlled bending aid incl. parking position on the right - Rear safety enclosure, electrically closable - CNC-controlled crowning - Pneumatic die shifting - Hydraulic tool clamping top and bottom incl. LED lighting at the front - Controlled axes: Y1, Y2, X, X1 R, Z1, Z2 - BendGuard light barrier (for 220 mm/s) - Documentation - 2 upper tool sets (straight & gooseneck) - 5 lower tool sets All specifications are without guarantee. The machine is currently still located at the seller's facility in the Stuttgart area and can be inspected under power by appointment. The company is a very small business that is now closing due to retirement. The main photo has been altered with AI assistance. Complete original images are available upon request.

Condition: ready for operation (used), Year of construction: 2011, bale weight: 550 kg, overall weight: 2,403 kg, transport height: 225 mm, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2011 Pressing force: 532 kN Voltage: 400 V Max. bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Feed opening: 119.5 x 65 cm Pedsy A Igkopfx Adlspr Condition: Very good! Functionality checked. FLITS Rental & Sales service: We supply one bundle of baling wire (120 wires) with each machine. Need more bundles of baling wire? Request a non-binding offer.

Condition: good (used), Year of construction: 2006, functionality: fully functional, Baler Presto CC 30 V, Year of Manufacture 2006 Technical Data: Manufacturer: Presto Model: CC 30 V Year of Manufacture: 2006 Pressing Force: 30 t Cycle Time: 34 s Drive Power: 11 kW Filling Opening: 1080 x 950 mm Filling Volume: 0.69 m³ Tying: 4-fold, automatic Throughput Capacity at Bulk Density of 35 kg/m³ - 2.0 t 60 kg/m³ - 3.2 t 100 kg/m³ - 4.8 t Bale Dimensions: 700 x 950 mm Bale Weight: up to 350 kg Pjdpoyz Il Dsfx Adlspr Dimensions: 3650 x 1770 x 2150 mm (LxWxH) Machine Weight: approx. 3,900 kg Materials: Paper, cardboard, film Please note: All technical data is based on information provided by the manufacturer. No liability is assumed for the accuracy or possible errors in the stated information. The offer is non-binding, subject to prior sale, and can be revoked at any time. Viewings are possible by arrangement. Sale is ex works, payment in advance, without warranty or guarantee.