Used Forester Group for sale (3,654)

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Nwsdpfxjzvq Rce Abpok Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price: 35 000 EUR (VAT is not included)

Condition: excellent (used), Double side - Independent Machine (1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3 Panels thickness (min/max) mm 10 (ca.) / 60 Working width (min/max) mm 260 (ca.) / 3200 Numerical Control MAESTRO PRO EDGE /Software EYE-M Adjustable feeding speed (m/min) 10- 40 Safety sound-proof enclosures/cabins + Distance (center-axes) of Disappearing Dogs (mm) 400 SIZING PART (for each side): Anti-chipping Milling Unit AS (1 x Kw 4) Hogging Units DTR (2 x Kw 8) with CNC vertical adjustment Spraying unit (Anti-sticking liquid) AAR EDGE-BANDING PART (for each side): Lamps to heat the workpieces side + Glueing Unit (PUR Glue + Quick Melt system) Nwodpfozmfg Tox Abpok CNC adjustment of the edge height Band Pressure zone (N.C. adjustment) + Edge coils support (No 6 reels) CNC positioning of the edge Snipping (end-cutting) unit YU/SP-750 (30 m/min) Rough Trimming unit RSP Fine Trimming unit (Multi-profile, by N.C. adjustment) RI/S 2P Corner Rounding unit ( Contour Trimming) C1+C2 (4 x Kw 0,35) ED-SYSTEM e Fast-Release Profile Scraping unit RAS/S Milling grooving unit U (1 x Kw 5,5) on Left-side Glue scraping unit RCA/2C Spraying Unit (for polishing liquid) Buffing unit SPE

Condition: used, functionality: fully functional, Year of construction: 2014, load capacity: 3,300 kg, empty load weight: 795 kg, Accessories Load center: 600 Mast type: None Condition: Ready for use and fully functional Nedpfxou Dzrhe Abpewk Technical condition: Very good Description: In addition to this Luck model, we have approx. 200 heavy-duty forklifts, compact forklifts, forklift trucks & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always feasible for us. We are also happy to buy your used truck free of charge, even without you purchasing a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail about this LASTSTABILISATOR , The Load Stabiliser P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul and special construction for forklifts from 8 tons. We are also happy to display your vehicle for sale on consignment.

Condition: used, functionality: fully functional, load capacity: 6,000 kg, empty load weight: 1,250 kg, total length: 2,800 mm, Carrying mandrel Load center: 2000 Condition: Ready for use and fully functional Nodpfxeu Dzrbe Abpowk Technical condition: very good Description: In addition to this DORN model, we have approx. 200 heavy-duty forklift trucks, compact forklift trucks, forklift trucks & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always feasible for us. We are also happy to buy your used truck free of charge, even without you purchasing a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail about this TD-270 P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul and special construction for forklifts from 8 tons. We are also happy to display your vehicle for sale on consignment.

Condition: excellent (used), Flexible N.C. line for drilling, routing and "hardware" insertion. Numerical Control "TPA" Albatros. Composed by: Nodpfx Abshvagkspowk 1) Hedgehog loader, with 12 positions (for 12 panels), vertical panel introduction. 2) CNC Drilling and routering machine Mod. Over 25.13 with inserter (for bushes, shelf support and base). - N. 1 operating head (estimated KW 5,5) with tool storing revolver (10 positions) - N. 1 boring head with 24 independent spindles (X axis) - N. 1 boring head with 2 independent spindles (Y axis) - N. 1 boring head with 5 independent spindles (Z axis) - N. 1 insertion unit (bushing screwing) - N. 1 insertion unit (shelf support pressure) - N. 1 storage and feeding tank 3) Unloader (90° side-deplacement), with motorized conveyor for vertical outfeed of the panel. 4) Unloader - tilting (0°-90) moves the panel from vertical to horizontal, with motorized conveyor

Condition: excellent (used), Year of construction: 2010, Cylindrical grinding machine Fab. Robbi Group Typ. Omicron 600 RT5 Year 2010 Technical data Make Robbi Group, IT Type OMICRON 600 RT5 Year of manufacture 2010 table Center width 600 mm Sanding length max. 600 mm Swivel range + 9° / - 5° Center height above table 160 mm Workpiece weight between centers 120 kg Workpiece weight for fly grinding 40 kg Tailstock Quill stroke 25 mm Quill diam. 43 mm Internal mounting cone CM 4 Workpiece headstock Rotation speed 0 - 600 Internal mounting cone CM 4 Spindle passage 26 mm Grinding wheel Diameter 450 mm Width min 20 / max 50 mm Bore 127 mm Nwedpfx Abswhm Rfspsk Equipment - Manual or automatic cycle - Automatic dressing compensation - Simplified presetting of grinding wheel and workpiece All information without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: excellent (used), Panel Beam Saw - With rear lifting table Numerical Control POWER CONTROL Software CADmatic 4 Professional Outside Rollers table for pre-loading (mm 5600 x 2200) Lifting scissor table (mm) 5600 x 2200 Rear pusher with 13 clamps / grippers (1 x Power Concept / Twin Pusher) With clamps / grippers - RETENTION DEVICE FOR THIN PANELS (Minimum thickness 3 mm) Njdpjzl S Nfsfx Abpewk Turning device (rotating unit) at 90° Max. cutting width (mm) 5600 - Useful stroke of the pushing system (mm) 5600 Max blade projection (mm) 130 Scoring Unit (max saw diameter / power) mm 200 / Kw 2,2 Main Sawing Unit (max saw diameter / power) mm 480 / Kw 30 Adjustable speed of the saw carriage (m/min) 1 - 150 N° 5 Front supporting tables with Air blowing system OPTION: Printer for labels - PICA

Condition: used, Year of construction: 2004, The Tortica Ice Group Family Tub Ice Cream Filler is a high-performance, purpose-built packaging solution engineered for efficient filling of family-size ice cream tubs and multi-serving containers. Designed for artisan creameries and industrial ice cream manufacturers alike, this machine combines precision dosing with gentle product handling to preserve texture and reduce waste. Built with robust stainless-steel construction and hygienic food-grade components, the Tortica filler ensures consistent portion control and maximum uptime. Its intuitive controls and flexible filling range make it ideal for a wide variety of frozen desserts — including ice cream, gelato, sorbet, frozen yogurt, and premium specialty blends. Nodpoynr Axsfx Abpjwk Key Features: - Accurate volumetric or servo dosing for consistent product weight and minimal giveaway - Adjustable fill heights and speeds to accommodate tubs from small family sizes to larger multi-serve formats - Hygienic design with easy-clean sanitary surfaces, CIP compatible components, and sealed guarding - User-friendly interface for quick changeovers and reduced operator training time - Heavy-duty construction suited for continuous production environments - Smooth, low-shear filling preserves ice cream structure and reduces air entrainment - Optional integrations for lid placement, sealing, date coding, and packing conveyors Whether you’re scaling up production or upgrading your existing line, the Tortica Ice Group Family Tub Filler delivers dependable performance, precise filling accuracy, and the flexibility to support product innovation and seasonal variety offerings. Cup size: 200 x 100 mm (LxW) Granular application: Available Main filling: Available Cap Closing: Available Stations: Cup Dispenser > Filler > Granular Filler > Lid Closing > Outlet Conveyor Condition: Good Available: Immediately

Condition: like new (used), functionality: fully functional, Ferwood Code: RS0003584 - Manufacturer Code: LCP2505AK-08 - Condition: As new (display item) - Functionality: Fully functional - Compatible Machine: - If interested, we offer overhaul service, please contact us. 1KG 20X20X20 Nwsdpfxeyrn Sqj Abpsk

Condition: excellent (used), Year of construction: 1996, Wood chip screening system Manufacturer - Andritz Group, Nedpsxn T R Aofx Abpewk Model: Konewood CS600 Screen capacity: 400-675m3/h Sieving sawdust and shavings from wood chips Conveyors. Steel Structures: – Steel support structures for screens and conveyors – Ladders and walkways for operation and maintenance

Year of construction: 2024, condition: used, functionality: fully functional, machine/vehicle number: 1731124010219J, Allpax Angle Sealing Device / Packaging Machine Manufacturer: Hualian Machinery Group Model: PTHW-WS-5045 Serial No.: 1731124010219J Year of Manufacture: 01/2024 Condition: used Color: light grey Internal Item Number: 2025120105 Pick-up Address: Industriestraße 5 (47918 Tönisvorst) The machine was in operation until dismantling. Tailor-made Solutions for Your Intralogistics Nwedox Ak Nrepfx Abpjk For roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods, as well as packaging machines, we are your competent partner! We are happy to provide you with an individual offer or advise you on system design or installation queries. Simply let us know your requirements and site conditions. Benefit from our years of experience and excellent network of experts. We have already successfully completed projects for companies in a variety of sectors, such as logistics, the pharmaceutical industry, trades, or the electronics sector. Together, we will find ways to optimise your processes and material flow cost-effectively and sustainably. We can also offer fully automatic sorting systems or complementary components, such as picking racks or containers.

Year of construction: 2019, condition: like new (used), Thermoformer Designed for pharmaceutical environments, it can thermoform trays for vials, ampoules, syringes, and medical devices in general, using thermoformable films such as PVC, PET, R-PET, Polystyrene (PS), PP, PLA, etc. Possibility to cold-form Aluminium based materials. Main Features: Balcony structure for easy access and cleaning Nedpfxeybcwtj Abpowk High-speed positive automatic product feeding systems Available with or without a sealing station Arrangeble for in-line connection Quick, repeatable, and tool-free format change Thanks to the servo-assisted main transmission, the machine speed is adjustable from the main HMI within dedicated recipes Automated thermoformer machine. Forming material reel unwinding - preheating - forming - filling with laminated strips (robot) - applying and sealing tyvek lid - cooling - serialised printing - indexing - punching - feed sealed strips out to box packaging machine.

Condition: used, This listing is for the MMM Group Vakulab HL Medical Autoclave. The unit is in full working condition and is ready for immediate use. Overview The Vakulab HL autoclave from MM Group Medical is a high-performance, GMP-compliant sterilizer designed for the safe, reliable, and validated sterilization of laboratory instruments, equipment, and materials. Specifically engineered for use in pharmaceutical manufacturing, biotechnology facilities, and research laboratories, the Vakulab HL combines advanced vacuum-assisted steam sterilization with robust stainless steel construction to ensure consistent results in even the most demanding applications. Key Features Advanced Steam Sterilization Pre- and Post-Vacuum Cycles: Ensures efficient steam penetration and rapid drying Optimized Steam Distribution: Uniform sterilization across all load types Programmable Cycles: Fully adjustable parameters for different sterilization needs GMP & Cleanroom Ready Double-Door Pass-Through Design (optional): For installation between clean and non-clean areas Nwedpfxjxv Dvfs Abpsk Stainless Steel Chamber & Piping: High-grade AISI 316L for corrosion resistance and hygienic operation Integrated Monitoring: Real-time cycle control with full batch documentation capability Operational Safety & Control User-Friendly HMI: Touchscreen interface for programming and monitoring Automatic Door Operation: With safety interlocks to prevent accidental opening under pressure Built-In Diagnostics: Self-check functions for preventive maintenance Technical Specifications The Vakulab HL is a vacuum-assisted steam sterilizer available in multiple chamber volumes, typically ranging from 300 to 1,000 liters. The sterilization process operates at temperatures between 121 °C and 134 °C, controlled via a PLC-based system with an intuitive touchscreen human-machine interface (HMI). The chamber is constructed from AISI 316L stainless steel, ensuring corrosion resistance and compliance with GMP hygienic standards. A water-ring or liquid-ring vacuum pump enables pre-vacuum and post-vacuum phases for thorough air removal and effective drying. Door configurations can be single or double-door in either sliding or hinged formats, with safety interlocks to prevent opening under pressure. The autoclave requires standard utility connections for steam, water, compressed air, and electricity. It is designed to meet EN 285, PED, ISO 9001, and GMP compliance requirements, and can be validated to ISO 17665 sterilization standards. Applications Pharmaceutical Manufacturing: Sterilization of equipment, components, and containers Biotechnology: Sterilization of fermentation vessels, culture media, and instruments Research Laboratories: Sterilization of glassware, tools, and lab consumables Hospitals & Clinical Settings: Safe sterilization of surgical instruments and textiles System Components High-grade stainless steel chamber with polished finish Vacuum pump system for pre- and post-cycle air removal Steam generation and distribution system Control panel with PLC and HMI touchscreen Integrated temperature and pressure sensors for validation Quality & Compliance Manufactured in accordance with GMP guidelines Complies with EN 285 and ISO 17665 sterilization standards Full FAT/SAT/IQ/OQ/PQ support for validation in regulated environments Designed for integration into cleanroom and production facilities Benefits Consistent, Validated Sterilization for a wide range of load types Flexible Confi...

Condition: excellent (used), C.N.C. WORKING CENTER (POINT TO POINT) 4 axis Goose-neck type Numerical Control Power Control - Software woodWOP Safety cabin (enclosure) of the working head Working table with pods and rails- No. 6 Support rails Front emergency carpets LASER system on X-axe for the rails positioning and on Y-axe for the vacuum pods positioning Automatic Tools Changing System No. 2 Tools storage plates W8 (No. 8 rear spaces) + (No. 8 lateral spaces) Max. useful working area (X - Y - Z) mm 3130 x 1250 (1550) x 100 (150) No. 2 Working areas - 1 x Vacuum pump (capacity 70 m3/h) Nwedjyxn Tiepfx Abpok Motorized carpet to evacuate chips and wastes Separate electric and command cabinet Total installed power A 32 WORKING GROUPS (TOP): No. 12 Independent vertical boring spindles (High Speed 7500) No. 6 Independent horizontal boring spindles (No.4 in X-axe + No. 2 in Y-axe) Drilling head motor-power (Kw) 2,3 Circular Grooving Saw (tiltable 0°- 90°) diam. (mm) 125 (N1 X-Y 90°) No. 1 Vertical electro-spindle: HSK63 (KW 9) OPTIONAL: Drilling Group with No. 4 horizontal boring spindles (Crosshead) PROFESSIONAL BARCODE READING SYSTEM

Condition: good (used), Kistler NC joining module with dual-station/spindle unit Kistler NCFH 60 servo press with feed slide & spindle station The Kistler NCFH 60 NC joining module is integrated into an industrial dual-station/spindle unit designed for automated series production (e.g., friction welding or precision pressing). The system is characterized by exceptional precision, integrated force-displacement monitoring (piezoelectric sensor technology), and an extremely robust design capable of withstanding continuous industrial loads. Precise press-fitting and joining: Ideal for high-precision assembly processes in the automotive industry, electronics manufacturing, or general mechanical engineering. Integrated quality assurance (force-displacement monitoring): Using built-in piezoelectric sensors, the module measures the exact tensile and compressive forces acting during the pressing process in relation to position. Flexible process control: Enables advanced functions such as "joining to block," position-controlled pressing, or force-controlled joining (when combined with a suitable controller, e.g., Kistler maXYmos). Automated workpiece holding: The coupled spindle station features an automated clamping function (pneumatically or hydraulically actuated via integrated cylinders), making it perfect for automated series production and assembly lines. Sturdy machine bed: The entire mechanical assembly is mounted on a heavy-duty welded steel frame to withstand the immense forces (up to 6 tons per side) generated during operation. Joining module manufacturer: Dr. Staiger Mohilo+Co GmbH / Kistler Group Type: 2151B 60304002 Model: NCFH 60 400 300 B H C G Nominal force: 60 kN (equivalent to a pressing force of approx. 6 tonnes) Max. total spindle stroke: 400 mm Max. travel speed: 300 mm/s Motor type: AC hollow-shaft servo motor (165H-180E) Holding brake: 18 Nm Certification: CE marking Njdpfx Abjzcpnzspswk Scope of delivery: Kistler NCFH 60 joining module including mounted flange coupling, yellow slide/feed guide, complete sensor cabling, and the associated spindle clamping station. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—new and used—in our shop! International shipping costs on request!

Condition: excellent (used), FLEXIBLE C.N.C. WORKING CENTER 3 axes (X-Y-Z) Movable panel (workpiece), static working head - Horizontal position of the panel (workpiece) Numerical Control PC 85 (Software woodWOP) Safety cabin (enclosure) of the working head Separate electric and command cabinet - Total installed power (Kw) 20 (ca.) No. 2 Workpieces fixing clamps (for the panels introduction in the working area) In-feeding working table (panel support) Out-feeding table (with motorized belts) Minimum workpieces dimensions (X - Y - Z) mm 200 x 100 x 8 (2 x 4 mm) Maximum workpiece dimensions (X -Y- Z) mm 3000 x 1000 (option mm 1300) x 80 (2 x 40 mm) Two panels simultaneously processables (in Z axe) WORKING GROUPS (TOP): 2V32, 2H8X/Y2, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle ETP-25 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 32 Vertical drilling spindles (power Kw 2.7) No. 10 Horizontal drilling spindles (8 in X + 2 in Y) Nwsdpfjziapbjx Abpsk WORKING GROUPS (BOTTOM) No. 1 Vertical electro-spindle ETP-25 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 32 Vertical drilling spindles (power Kw 2.7) No. 10 Horizontal drilling spindles (8 in X + 2 in Y)

Condition: excellent (used), C.N.C. WORKING CENTER 3 axes (X-Y-Z) Vertical position of the panel (workpiece) Movable panel (workpiece), movable working head Numerical Control POWERCONTROL + POWERTOUCH Software woodWOP Nedeyywcvepfx Abpswk Safety cabin (enclosure) of the working head No. 1 Workpieces fixing clamps (for the panels introduction in the working area Panels feeding by motorized chain/track Minimum workpieces dimensions (X - Y - Z) mm 200 x 70 x 8 Maximum workpieces dimensions (X - Y - Z) mm 3050 x 850 x 56 Total installed power (Kw) 11,5 (ca.) WORKING GROUPS: No. 1 Drilling head (power Kw 2.3) with vertical spindles - No. 13 Independent vertical boring spindles (V13 High Speed) - No. 6 Independent horizontal boring spindles (4 in X + 2 in Y) No. 1 Circular Grooving Saw (on X axis) dia. (mm) 100 No. 1 Vertical electro-spindle (HKS63) power Kw 5 Automatic Tools Changing System - Tools storage plate (No. 4 folds-positions)

Year of construction: 2017, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE FOR TUBES WITH LOADING/UNLOADING SYSTEM MIN CIRCULAR SECTION: ø 25 mm MAX CIRCULAR SECTION: ø 355 mm MAX SQUARE SECTION: 260 X 260 mm MAX RECTANGULAR SECTION: 300 X 200 mm MAX ADMITTED LOAD: 100 Kg/m Nodpfx Absx E Eihjpewk SOURCE: IPG YLS-4000 ; 4000 W CONTROL UNIT: SIEMENS 840D WEIGHT: 12500 Kg NOTE: AUTOMATIC LOADING 3-12.5 mt; AUTOMATIC UNLOADING 12.5 mt; 3D CUTTING HEAD; CAPACITIVE SENSOR; AUTOMATIC ADJUSTMENT

Condition: new, Year of construction: 2026, Laser power: 12000 Watt Working range laser: 3048 x 1524 x 280 mm simultanious: 150 m / min Max. positioning accuracy X,Y axis: 0,05 mm Nwedpfx Ajyz Iu Sobpjk Max. steel: 30 mm Max. stainless steel: 25 mm Max. aluminium: 25 mm Max. brass: 20 mm Max. copper: 10 mm Max. workpiece weight: 1500 kg Length: 8960 mm Width: 2720 mm Height: 2400 mm Machine weight: 5900 kg Electrical connected load: 62 kW

Condition: new, Year of construction: 2025, Laser power: 12000 Watt Working range laser: 3048 x 1524 x 280 mm simultanious: 150 m / min Max. positioning accuracy X,Y axis: 0,05 mm Max. steel: 30 mm Max. stainless steel: 25 mm Max. aluminium: 25 mm Max. brass: 20 mm Max. copper: 10 mm Max. workpiece weight: 1500 kg Length: 9500 mm Width: 4200 mm Height: 2600 mm Nwodpfx Asv U A I Iebpek Machine weight: 5300 kg Electrical connected load: 60 kW

Condition: new, Year of construction: 2026, Laser power: 12000 Watt Working range laser: 3048 x 1524 x 280 mm simultanious: 150 m / min Max. positioning accuracy X,Y axis: 0,05 mm Max. steel: 30 mm Max. stainless steel: 25 mm Max. aluminium: 25 mm Nwodpjzcum Nefx Abpjk Max. brass: 20 mm Max. copper: 10 mm Max. workpiece weight: 1000 kg Length: 8960 mm Width: 2720 mm Height: 2400 mm Machine weight: 5900 kg Electrical connected load: 36 kW

Condition: new, This is a new machine which is manufactured in Romania by the manufacturer Emsil. Customer wishes can be taken into account depending on technical implementability and are checked in advance by the manufacturer's engineering office. Narwhal features a drilling spindle that is made of hardened, tempered and rectified alloy steel. It is mounted with preloaded oblique precision ball bearings. The machine is also equipped with a milling and boring bar which can handle exceptional power and torque. The bar is made of nitrided alloy steel and is also mounted with oblique preloaded precision ball bearings. It moves on bronze guide bushings. The clamps of both units, used for securing and releasing the tool holder cone with ISO 50 coupling, open and close automatically Rotary Turntable: The table is turned by means of a double pinion gearbox, a central rod wth bearings and hydrostatic sliding block of the centre bearing which is of a suitable size to guarantee maximum precision with large loads, even unbalanced ones. There is a recirculating ball screw slide guide system for the x-axes. Both axes are equipped with a direct measuring system. CNC Axes Control: The 9 axes of the machine are monitored at all times. The monitoring system is equipped with a 15'' TFT screen, a control panel, remote diagnostics that alert the user in case of faults, a user memory, network connectivity, remote control of the process, integrated PLC, etc. The machine is compatible with the multiple control systems such as Heidenhain, Fanuc, Siemens etc. You can choose the sizes of machining of X/Y and Z axes: from 1200 - 3500 / 1000 - 3500 / 400 - 1500mm Nodpfx Abou Id H Aopjwk *

Condition: refurbished (used), - CNC controlled cardboard cutting machine\n- Custom-made by LCR group\n- Fully overhauled Nodpoxbidljfx Abpswk

Condition: new, Year of construction: 2026, functionality: fully functional, Underfloor repair frame for bodywork UL-L133A 3T TM-GROUP COMPLETE SET: FRAME + SCISSOR LIFT + NECESSARY ACCESSORIES!! Specifications: ✅ Manufacturer: TM-GROUP ✅ Power supply: hydraulic ✅ High-quality hydraulic pump ✅ Frame length: 7000 mm ✅ Frame width: 4000 mm ✅ Height: 500 mm ✅ Sturdy and easy car mounting ✅ Universal for all post-accident repairs ✅ Warranty ⭐️ STEEL REPAIR FRAME Our manufactured repair frames allow for quick and fully professional repair of car bodies after accidents. The repair frame is made of thick-walled closed profiles, which guarantees the rigidity and strength of the structure during car repairs. ⭐️ SCISSOR LIFT - Electronically controlled - Profile: 280 mm - Length: 2260 mm - Width: 680 mm - Height range: 280–1460 mm - Max lifting height: 1800 mm - Lift capacity: 3000 kg - Mounting: in the floor - Type: scissor lift, single actuator - Maximum arm working angle: 90° - Electronically controlled Nsdpfx Abeth Uktopowk - Easy disassembly and installation - Low failure rate - Intended use: mainly as a central lift - Ideal for tire changes and chassis repairs ⭐️ NECESSARY ACCESSORIES - Pulling tower (working): 1 set with foot pump - Mounting towers: 2 sets - Hand pump: 1 piece - Sill clamps: 1 set (4 pieces) - Standard accessories: as shown in the picture

Condition: new, saw blade diameter 600 x 30 mm capacity 90 degrees: round 215 mm capacity 90 degrees: square 195 x 195 mm capacity 90 degrees: flat 140 x 395 mm capacity 45 degrees: round 170 mm capacity 45 degrees: square 170 x 170 mm capacity 45 degrees: flat 100 x 175 mm turning speeds 2800 U/min total power requirement 3.0 kW weight of the machine ca. 310 kg range L-W-H 1077 x 1214 x 1558 mm Features: - Semi-automatic high-performance circular saw (underfloor) * For cuts from 0° to 180° right and left * In aluminum and light metal alloys * With rising saw blade * With extremely large cutting range (saw blade diameter 600 mm) * Digital display for angle adjustment from 0° to 180° - Manually opening safety cover - Hydro-pneumatic saw blade feed (via two-hand operation) - 2 pneumatic vertical vices with quick adjustment - Heavy-duty cast iron construction ensures vibration-free . . operation and maximum precision - Large bearing-mounted turntable with internal indexing at 0/45° * Ensures quick adjustment for miter cuts - Extractor nozzle for connecting a chip extraction system - Pneumatic spray system for cooling and lubricating the saw blade - Machine base frame - Powerful saw drive with 3-phase 3HP motor Included in delivery: - 1x carbide saw blade ø 600 mm - Blow-out gun - Full protective cover - Tool set - Detailed operating instructions, maintenance manual, etc. Nwedpfx Aoxaccfobpsk