Used Forge-Plate for sale (11,911)

Condition: ready for operation (used), Perforated plate Manufacturer unknown Bwedpfxjfpgp Ee Ahvsp Dimensions: 1500x1500 mm Working height: 940 mm – height adjustable Feet are screwed on Plate thickness: 110 mm Hole diameter: 45 mm Weight: approx. 2.0 tons

Condition: used, Cast bed Length: 2410 mm Width: 1500 mm Thickness: 550 mm 8 T-slots 50 x 27 mm with 2 opening (possibility to close them) 1 opening L 560 x W 500 mm Bedpszg Huljfx Ahvjwp 1 opening L 480 x W 360 mm Weight: approx 5 T

Condition: used, Cast iron bed 2600 x 2000 x 350 mm Length: 2600 mm Width: 2000 mm Thickness: 350 mm Bwedszg Hk Hspfx Ahvep 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Equipped with 12 leveling feet Weight: approx 4,5 T

Condition: good (used), Cast iron bed - Floor Plate Useful surface (L x W x H): 3600 x 1200 x 300 mm 4 T-slots: width 44 x 26 mm Bedpjzg Hkyjfx Ahvjwp Equipped with Levelling feet Weight: approx 3 T

Condition: used, Cast iron bed Length: 2300 mm Width: 1900 mm Thickness: 200 mm Height on feet: 980 mm 5 T-slots horizontal and vertical T-slots dimensions: 60 x 35 mm Square dimensions: 365 x 365 mm Crack at a longitudinal T (see photo) Bwjdpfx Ahezg Hfqjvjp Weight: approx 3 T

Condition: used, functionality: fully functional, machine/vehicle number: 2550X10.14MM, control type: manual, degree of automation: manual, actuation type: mechanical, number of rollers: 3, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller diameter: 400 mm, roller length: 2,550 mm, working width: 2,500 mm, working height: 800 mm, sheet thickness (max.): 14 mm, sheet thickness stainless steel (max.): 10 mm, input voltage: 380 V, input frequency: 50 Hz, Equipment: centralized greasing system, cone bending device, emergency stop, swiveling upper roller, 3 roll 2500x14 mm Plate bending machine Model OMCCA ITALY CAPACITY plate width 2500 mm plate thickness 14 mm pre-bending 10 mm --- Useful rollers width 2550 mm Top roll d 300 mm Side rollers D 280 mm hard surface of the 3 rolls centralized gear unit side rolls driven Opening front hydraulic drop-end to unload the closed shell. Bjdpfjy Aubusx Ahvewp Extended shafts to take installation of add-on molds for section bending Variable speed rolling up to 5 mtr/min power electric motor 20Hp on hydraulic unit console with electric push buttons commands. Dial gauge position rollers readout safety installations with emergency stop

Year of construction: 2016, condition: used, functionality: fully functional, We offer this used PLANOLITH granite surface plate PLANOLITH granite surface plate, year of construction 2016. Bwjdpozgw D Rsfx Ahvep Order number: 221881-1 Weight: 855 kg Accuracy grade: DIN 876/1 Permissible deviation: 0.025 mm Actual deviation: 0.00576 mm Checked on: 2016-11-09 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Manual 3 roll Bending Machine, excellent condition for sale manufacturer: Isitan 1050X1.2 max sheet width: 1050mm max sheet thickness: 1.2 mm Wire grooves at the ends of the rollers Conical bender roller diameter: 60mm Upper roller removable for easy workpiece removal machine dimensions: Bwodpfewk Rlxjx Ahvsp length: 130cm height: 100cm width: 65cm weight: 240kg

Condition: used, functionality: fully functional, machine/vehicle number: 7FBMF35-16267, Year of construction: 2013, operating hours: 6,500 h, load capacity: 3,000 kg, lifting height: 4,700 mm, fuel type: electric, mast type: triplex, Electric Forklift Truck – Toyota Year of manufacture: 2013 Technical data: • Model: Toyota 7FBMF30 Bwodpfow Hhwwsx Ahvjp • Load capacity: 3,000 kg • Drive: Electric (battery powered) • Mast type: Triplex with free lift • Lift height: approx. 4,300 – 4,800 mm • Fork length: 1,070 mm (standard) • Tyres: Solid rubber • Cabin: Open design, optionally with driver protection roof • Condition: Used, serviced and fully functional

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: PW2000-003, workpiece weight (max.): 2,000 kg, overall weight: 1,310 kg, table length: 1,400 mm, table width: 900 mm, The machine is in like-new condition! TECHNICAL DETAILS Maximum load capacity: 2,000 kg Tables and support surfaces Number of tables: 2 Support surface per table: 1,400 x 900 mm Swiveling movement Swiveling angle of the tables: 100° Angle of the load-bearing steel profiles: 90° Table travel distances: approx. 300 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): approx. 2,600 x 1,800 x 1,300 mm Machine weight: 1,310 kg Machine operating principle: The turning device consists of two opposing tables, each with a support surface of 1400 x 900 mm. On the side of the table that is facing downwards during swiveling, the load-bearing steel profiles are angled upwards by 90° in order to securely hold the plate to be turned even in a vertical position during the 90° swiveling process. Bodpozd A Rdofx Ahvewp Both tables are arranged opposite each other and are swivelled by 100° using hydraulic cylinders. The tables are mounted on a load-bearing substructure, on which one table is fixed and the other is movable relative to it. The movement is carried out by hydraulic cylinders, which can move the table, which is mounted on rollers, by approximately 300 mm. The substructure also supports the hydraulic and electrical components. A hydraulic unit serves as the drive source, supplying the cylinders with oil according to the control commands. The corresponding valves are electrically and/or hydraulically controlled and initiate and maintain the movements of the tables required for their interaction until the turning process is completed. Particular attention is paid to the safety of the movements and the precise adjustment of the table movement in the interaction between pressure and tension when designing the hydraulic system. The geometry of the axes of rotation of the tables results in a change in the load effect on the tilting cylinders. The hydraulics are designed in such a way that the required performance is ensured and an overload of the components is not possible during normal operation. Corresponding filters, combined with a generously sized tank volume, ensure a high availability of the hydraulic system. The necessary electrical control is completely housed in a steel sheet metal enclosure, which contains all the required components. The core of the control is a PLC, in which the operating parameters are processed according to the program specification. In addition, the emergency stop function and all the relays and output units required to control the functions are installed. The turning device is operated via a control panel in which a touch panel is used to input the function parameters, such as swivel table 1 up, swivel table 1 down, move table 1 forward, move table 1 backward, swivel table 2 up, swivel table 2 down, as well as start or stop the automatic mode. In order to avoid a collision of the tables in manual operation, the PLC programming is designed in such a way that this is prevented by the data on the table position and the respective table inclination. After the emergency stop situation has been resolved, the PLC control automatically completes the turning process. The turning device is equipped with heavy-duty rollers and can therefore be moved.

Condition: new, Unused Alfa Laval model AQ4T-BFG approximately 15sqmt heat transfer area 316L stainless steel plate heat exchanger. Unit rated 12 bar design pressure at 150 deg.c. Bwsdpszimvuofx Ahvep

Condition: good (used), Top of the range plate washing system for high throughput. Has come from Wembley Football Stadium where it was washing plates for the hospitality areas. Lovely condition and with options Bedpfsvd Eiyjx Ahvjwp

Condition: used, Year of construction: 1963, total length: 2,000 mm, total width: 800 mm, total height: 1,400 mm, Empty weight: 1.000 kg - Year: 1963 - Documentation available: No - CE certificate present: No - Serial number: H2111 - Drive system: Conventional - Number of rolls [pcs.]: 3 Bjdpozhw Dtsfx Ahvowp - Max. sheet thickness [mm]: 3 - Max. working width [mm]: 1550 - Transport dimensions: 2000mm x 800mm x 1400mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 1976, functionality: fully functional, hydraulic forging hammer (H5) Bwjdpfxoziw N Ee Ahvep Manufacturer: BECHE Type: KGH 31.5 Year of manufacture: 1976 Energy: 31.5 kJ Machine foundation with spring damping elements Forging furnace Gas-heated Power: 400 kW New Siemens S7 control system, refurbished

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 100.981.48, functionality: fully functional, hydraulic forging hammer (H1) Manufacturer: LASCO Type: HO - U 400 SO Bsdpfoziw Nxox Ahvswp Year of manufacture: 1999 Impact energy: 40 kJ Ram stroke: 710 mm Ram weight: 3,000 kg Machine foundation with spring damping elements, forging furnace, gas-heated, power output: 800 kW, underfire zone, pre- and main chamber burner, work platform

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 100.06238, functionality: fully functional, hydraulic forging hammer (H2) Manufacturer: LASCO Type: HO - U 630 SO Year of manufacture: 2008 Impact energy: 63 kJ Impact frequency: approx. 85/min Ram speed: up to 5 m/s Bwjdpfxoziw Nle Ahvjp Ram stroke: 520 to 760 mm Ram depth: 750 mm Ram weight: 4,300 kg Central lubrication with hydraulic oil Filter circuit with cooling

Condition: good (used), Year of construction: 2017, Sahinler 4R HSS 20-280 Hydraulic 4-roll plate bending machine – Year 2017. Bending length 2050 mm Max. bending capacity - mild steel 20. Upper roll diameter 280 mm Lower roll diameter 280 mm Lateral roll diameter 220 mm Bending speed 1,5 / 5 m/min. Motor power 16 kW Bwedpfx Ahoxau D Ievsp

Year of construction: 2012, condition: good (used), Ficep Gemini HD36 GANTRY PLATE PROCESSING CENTRE, AUTOMATIC CNC DRILLING, MILLING AND THERMAL CUTTING SYSTEM, serial no. 33275, year of manufacture 2012, 127mm max. thickness, 520N/mm² tensile Bjdpfx Aeivfc Rehvowp strength, with fitted eight head tool holder, Hypertherm HyPerformance plasma HPR260XD power supply unit, galvanised steel ducting, Autchazioni AVV.2KW fume extraction unit, approx. 3.5m x 1.75m x 3.9m high, machine bed approx. 9.4m x 3.8m wide

Condition: good (used), Year of construction: 1999, CNC PUNCH / DRILL / SHEARING LINE for angle and plates. Bodpfxsvkphgs Ahvowp TECHNICAL DATA. PUNCH INSTALLATION. MATERIAL SPECIFICATION material sample steel 52 plate size (MM) X (MM) max 300 x 25 material sample steel 37 plate dimension (MM) X (MM) min 60 x 6 max 400 x 20 angle line dimension min 50 x 50 x 5 max 150 x 150 x 5 Punch information TYPE P2- XXX-XX number 2 TYPE P3-XXX-XX number 3 TYPE P5-XXX-XX number 5 punching capacity tonnage 110 punching diameter (mm) x thickness (mm) max 32 x 20 Shear UNIT Shear tonnage 180 Capacity max 400 x 20 Stamping UNIT Total number of characters number 40 Maximum number of characters per operation 12 CONNECTION VALUES Voltage 3 phase + Neutral + Earth V 3 X 400 Fuse A 63 slow Power KW 25 Frequency HZ 50 Permitted m-axis tolerance mains voltage % +/- 10 Field rotation Right Air pressure bar 6-8 Air capacity m2 / hour 250

Condition: excellent (used), Year of construction: 2012, · V200 Plate drilling machine (executed with a VD40 drilling unit and an X-Y coordinate table). Bwjdpfx Aswphgdshvjp · VTC 8/40 tool changer (8 places). · Hydraulic numbering unit VN 1/16 · Deburring unit VDB 2 (each hole is automatically deburred). Max. length 1.400 mm* Max. width : 1.000 mm Min/max. thickness : 3 - 60 mm Capacity : : 600 kg * Longer lengths (max. 2 400mm) possible by automatic repositioning.

Condition: used, functionality: fully functional, Year of construction: 2008, Peddinghaus FDB 1000/3 – CNC Plate Drilling & Profiling System– Year 2008 6 metres x 1 metres Capacity. Bwedpey E N Hdofx Ahvsp Maximum workpiece width 1000 mm. Maximum workpiece thickness 50 mm. 3 x drilling spindles. Maximum drilling diameter 40 mm. Oxy‐Fuel. Hypertherm Plasma. Kemper Extraction Unit

Condition: good (used), 2 pcs. AMF grid panel, 415 mm x 740 mm, height 50 mm. Grid: 40 x 40 mm, with 16 H7 pilot holes and M12 threads. With cast support under the panel, height 100 mm. Bwsdpfoziwzhox Ahvsp

Condition: good (used), Year of construction: 2005, sheet width 2560 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 2600 mm down holder 15 Stück no. of strokes max. 24 Hub/min oil volume 120 ltr. cutting angle 1.6 ° back stop - adjustable 750 mm Control PRG 911-1 Number of working hours ca. 370 h total power requirement 11.0 kW weight 4700 kg range L-W-H 3190 x 2100 x 1560 mm with only approx. 370 operating hours (!) Features: - Robust electro-hydraulic oscillating shear - Digital position display for electric backgauge * Backgauge travel X = 750 mm * Backgauge with backlash-free ball screw * Travel speed 100 mm/sec - 1x sturdy side stop * With T-slot, flip-stop, and millimeter scale - 2x sturdy front support arms - Electric cutting length limiter * Cutting length limiter to increase strokes per minute - Manual cutting gap adjustment * centrally operated on the left side stand - front support plates - front finger/interference guard - jog mode with push buttons on the control panel Bedpfx Ahszh N U Rjvjwp - protective guard = safety device behind the machine - operating instructions (PDF)

Condition: good (used), Clamping plate, welding table, welding table, straightening plate Bodoy Tit Hepfx Ahvswp -Clamping plate: solid design, with large vise -Clamping surface: 1200 x 1100 mm -Table height: 850 mm -Sheet thickness: 105 mm -Vise: Jaws 150 x 30 mm, clamping range 245 mm -Overall dimensions: 1300/1200/H1060 mm -Weight: 1100 kg

Condition: good (used), Clamping plate, marking-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table -Clamping plate: on solid base frame -Clamping surface: 2000 x 1200 mm Bwodpfexm R S Uex Ahvjp -Table height: 735 mm -Plate thickness: 125 mm -Transport dimensions: 2000/1400/H735 mm -Weight: 2220 kg