Used Forging Manipulator for sale (462)

Condition: ready for operation (used), Romanian Forging Hammer CM 3150 The hammer is similar to Huta Zygmunt MPM 10000B. - Maximum impact energy at maximum stroke – 10,000 kgm; - Ram weight – 3,150 kg; - Mode of operation – pneumatic; - Ram stroke – 900 mm; Bcjdpfxow Sdwvo Abpju - Number of blows per minute – 90; - Working pressure – 5 – 7 bar; - Anvil weight – 63 t - Total weight – 100 t.

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, overall weight: 100,000 kg, workpiece weight (max.): 18 kg, Forging hammer HUTA ZIGMUNT type MPM 3000 Bcsdpfx Abelnllbjpsu The same type as MPM 10000 Energy of blow: 10 000 kgm Ram weight: 3 570 kg. Max. ram stroke: 1 000 mm Number of strokes per minute: 90 Total weight: 100 ton Anvil weight: 70 ton The hammer is equipped with modern CNC lubricating unit and set of anti-vibration pads. AHAT SK Ltd., Bulgaria +359 889 433449

Year of construction: 2022, condition: new, Attachment suited for: Construction machines The high speed manipulator on the pictures is manufactured for casting factory. They put the the materials into the grinding process. We can manufacture boom-arm in hydraulic or electrical systems with breaker, bucket, grapple etc.. Bcsdpfjn Tm Sxox Abpeu For detailed information please contact us

Year of construction: 2022, condition: new, Height adjustable L manipulator Bjdpfx Absh Td Thjpscu Load: 500kg Stroke: 640mm, height faceplate min. 480, max. 1.110mm Pivoting range: +/-185 face plate diameter: 800mm Welding current: 400A Torque face plate: 900Nm Torque swivel arm: 900Nm Total length: 2.495mm Height: 1.855mm Width: 900mm The rotary stand is controlled by a hand-held remote control with the following functions: - LIFT arm - arm LOWER - Arm swivel RIGHT - Arm give LEFT - Potentiometer for the stepless SPEED- adjustment of the faceplate For the control of the face plate a two-pedal foot switch is available with the functions: - face plate rotation RIGHT - face plate rotation LEFT

Year of construction: 2022, condition: new, Height adjustable rotary tilt table Load: 500kg Stroke: 1.015mm, height faceplate min. 345, max. tilt angle 120°. Face plate diameter: 800mm Welding current: 400A Torque face plate: 1.300Nm Total length: 2.365mm Height (housing): 1.030mm The rotary tilt table is controlled by pushbuttons on the machine housing with the following functions: - LIFT arm - Arm LOWERING - Potentiometer for the stepless SPEED- adjustment of the face plate For the control of the face plate a two-pedal foot switch is available with the functions: Bodpjh Tfbzefx Abpscu - face plate rotation RIGHT - face plate rotation LEFT

Year of construction: 2022, condition: new, Manipulator with two height adjustable outriggers and face plate. Bedpfx Absfnku Hepjcu Load: 1.500kg stroke: 800mm swivel range: 300 face plate diameter: 1.000mm Welding current: 600A

Condition: good (used), Forged gripper, manipulator forged gripper, sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper Bedpfx Absdavnzspjcu -Sheet metal claws -Span: 0 to 250 mm -Load capacity: 1,000 kg -Quantity: 1 piece available -Dimensions: 730/240/H860 mm -Weight: 118 kg

Condition: good (used), Forged gripper, manipulator forged gripper, sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Manufacturer: VEB, Material gripper type B04-Z10-1 -Load capacity: 1,000 kg -Wingspan: see photos -Dimensions: 280/190/H320 mm Bodpfx Abolntntjpocu -Weight: 21 kg

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, load capacity: 16 kg, arm reach: 1,611 mm, controller manufacturer: KUKA, controller model: KRC2 ED05, The KR 16 F is a compact foundry robot built to operate in high-temperature, dusty, and wet environments. With a 16 kg payload and 1610 mm reach, it delivers precise handling in casting, forging, and other demanding processes. Main Applications: - Welding - Dispensing - Additive Manufacturing Model: KRC2 ED05 KR 16-F Condition: Used Year: 2006 (more option is available) Controller Cabinet: KRC2 ed05 Included: Manipulator + KRC2 Control Cabin + All Wire Sets + Teach Pendant Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman. (Source: KUKA's Website) Bsdpfx Absw Nawyjpocu

Condition: used, Vacuum pump, ATEX, Elmo G400Capacity: 440 mbarVacuum manipulator + jib arm (max. 50 kg)Application: Handling bags and cartons Bcjdpfxoyfw H Do Abpou

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, Used upsetting press with induction heating, for solid material Ø: 12mm – 60mm Bedpfsycl Idox Abpecu

Condition: used, Year of construction: 2010, functionality: fully functional, System consisting of: 1 Qirox QRC 350 welding robot incl. R II controller, computer upgrade to QC2 version year 2025, Bcsdpfjyfd Nxox Abpou New programming handset with cable, 24 V buffering, 2 GB flash drive Software extensions: Gas nozzle sensor, arc seam tracking, point editor, Welding equipment: 2 Qineo Puls Pro 601 (600A) with Master control module, wire feeder, WDD additional wire drive on torch, torch hose package, MRW 510 evo welding torch, torch test gauges, mechanical cleaning, pressure booster, drum wire equipment Floor track 35 kN, travel distance 20 m, 1 C-column with cross and vertical slides, vertical travel 1.5 m, cross travel 2 m Wide selection of manipulators available on request Connection control, 2 light barriers for safeguarding the floor track, 2 start preselection, Delivery date: prompt delivery possible. Date by arrangement. Inspection under power possible.

Condition: new, Year of construction: 2025, functionality: fully functional, For sale is a new ABB IRB 6700-150/3.20 >>ORIGINAL PACKAGING, YEAR OF MANUFACTURE 2025 Manipulator: 435-114 Variant: IRB 6700-150/3.20 209-202 Manipulator color: ABB Graphite White standard 287-4 Version: Standard version 334-1 ABB logo on manipulator: With ABB logo 1999-1 Standard calibration method: Axis Calibration Base: 700-3 Controller model IRC5: Single Cabinet Controller IRC5 129-1 Electromagnetic compatibility (EMC): Prepared for CE marking 769-2 Supply voltage: 400V supply voltage 752-2 Power connection: Power connection via HAN HSB 6p+E plug 742-1 Main switch: Main rotary switch 708-1 Control cabinet ambient temperature: Control cabinet ambient temperature up to max. 45°C 741-1 Plug field cover: Plug field cover for one field 438-1 Warranty period: Warranty period after delivery 18 months (partner)/12 months (end customer) Bedpfx Abeygmtcspjcu Floor cables: 210-2 Manipulator cable: 7 m manipulator cable 16-1 Customer signal interface: Customer signal interface connected to control cabinet 94-1 Customer signal cable: 7m customer signal cable 859-1 Customer signal cable, ProfiNet: 7m customer signal cable, ProfiNet Control unit: 701-1 FlexPendant: FlexPendant with 10m connection cable 888-2 Profinet I/O: ProfiNet I/O Master/Slave software 941-1 Ethernet switch: Ethernet switch 1541-1 Base Dig. 16In/16Out: Base module Digital IO 16 In / 16 Out 1550-1 Conv.Tracking unit Int.: Conveyor Tracking unit Int. 1 727-1 Power supply 24V: Power supply 24V, 8A 731-1 Safety signals: Safety signals internal 996-1 Safety Module: Safety Module 997-1 Safety Network: PROFIsafe F-Device 1125-2 Safety Robot Supervision: SafeMove Pro 733-1 Operators panel: Operator panel on control cabinet 735-2 Operating mode selector switch: Operating mode selector switch with 2 positions for drive units 736-1 Service socket: Service socket 230V ROBOTWARE: 685-2 Robotware Version: Operating system RobotWare 6 606-1 Conveyor Tracking: Software option Conveyor Tracking 608-1 World Zones: Software option World Zones 611-1 Path Recovery: Software option Path Recovery 613-1 Collision Detection: Software option Collision Detection 623-1 Multitasking: Software option Multitasking Process: 455-8 Application signals: Parallel and Ethernet 778-1 DressPack process configuration: for material handling 798-3 DressPack variant: Base to axis 3 458-1 Mating connector set for user signals on axis 1 to 3 incl. BUS (CP/CS/BUS): Mating connector set for user signals on axis 3 incl. BUS (CP/CS/BUS) GENERAL: 448-2 Delivery project: Expanded Offer

Condition: ready for operation (used), Year of construction: 2008, number of axes: 6, This 6-axis PANASONIC TA-1800WG Welding Robot was manufactured in 2008. It includes a 350A welding source, a VWP 316/351/95-3 welding gun, a BRG 2000 mechanical cleaner, an 800mm plinth, and a 750 H-manipulator. If you are looking to get high-quality welding capabilities, consider the PANASONIC TA-1800WG machine we have for sale. Contact us for more information. • 6-axis welding robot Additional equipment • Welding source: 350A (SP-Mag / Hyper Dippulse) • Welding gun: VWP 316/351/95-3 Bcsdpfx Asyfd N Esbpsu • Mechanical cleaner: BRG 2000 • Plinth: TA, H=800 mm • H-manipulator: 750

Condition: ready for operation (used), Year of construction: 2015, operating hours: 61,469 h, controller manufacturer: TRUMPF, controller model: TASC 6000, This TRUBEND Cell 5000 with TruBend 5085 extended version (2720 mm x 850 kN) and BendMaster 60 was manufactured in 2015. World's first bending automation with image recognition for maximum flexibility. Sheet metal parts up to 40 kg, 6-axis backgauge sensor technology. Maximum repeat accuracy thanks to angle sensor technology (ACB) in automated operation. It features a stable all-steel frame, electro-hydraulic top drive, and a modern block hydraulic system. The control unit is a TRUMPF TASC 6000 with a 15-inch touchscreen and network capabilities. Ideal for precise bending operations, consider the opportunity to buy this TRUMPF TruBend Cell 500 press brake. Contact us for more information about this machine. • Machine: TruBend 5085 (2720 mm x 850 kN) with BendMaster 60 • Stable all-steel machine frame • Press beam with spherical bearing and tilt adjustment • Electro-hydraulic top drive with 4-cylinder technology • Generous edge clearance Bsdsx Imqlepfx Abpecu • Flat front covers • Modern block hydraulics • Electronic pressure balance • Measuring system with glass scale and spring compensation • Hydraulic oil in the machine (lifetime lubrication) • Oil cooler • Control cabinet cooling via air-to-air heat exchanger • Modern machine design • Stop/Backgauge • Stop system • Backgauge system: 2 axes (X and R) • Tool clamping • Upper tool holder, manual clamping, hardened • Lower tool holder, hydraulic clamping, hardened • Lower tool shift, 2 positions, pneumatic • Crowning • Manual crowning • Control • TRUMPF TASC 6000 • Graphical workshop programming • Windows XPe (embedded), Pentium 4, 2.8 GHz • 2 GB RAM • 15-inch touchscreen • Network-enabled • Teleservice via modem • Operation • Control panel with LCD keypad and foot switch • Communication rail • Safety • Standard safety devices • BendGuard safety device for upper tools up to 390 mm • CE marking Additional equipment • TRUMPF BendMaster automation (standard features) • Robot/Handling • Stable base and manipulator in die-cast aluminum • Load capacity 60 kg (workpiece plus gripper) • Low-profile welded floor track • Sheet metal sensor for contour detection • Rotary feedthrough for easy gripper change • Gripper coupling on the BendMaster • Sensors for 4-axis backgauge system • Electric drives • Double sheet detection • NC gripper transfer station • Vacuum generation for suction grippers • Control • TRUMPF PC control with operator terminal • Teleservice via modem • Operation via screen, mouse, and keyboard • Safety • Safety fence with access doorWorld's first bending automation with image recognition for maximum flexibility Sheet metal parts up to 40 kg, 6-axis backgauge sensor technologyMaximum repeat accuracy thanks to angle sensor technology (ACB) in automated operationTruBend 5085 (2720 mm x 850 kN) with BendMaster 60

Condition: excellent (used), functionality: fully functional, power: 125 kW (169.95 HP), emission class: euro5, Year of construction: 2019, operating hours: 4,500 h, Conrad Boxer 200 drilling rig with desanding unit Advanced wash drilling system, ideal for clay soils and geothermal applications. Includes 150 meters of drill pipes. The machine is equipped with a custom sand separation unit that efficiently separates clay and water, optimizing the drilling process. Hydraulically driven crawler chassis with rubber-vulcanised track shoes, track width 400 mm. Self-supporting welded steel subframe with stabilizing cylinders. Iveco NEF 45 ENT diesel engine, approx. 125 kW. Fully equipped hydraulic system with stainless steel reservoir. Modem installation for remote diagnostics. Radio remote control for travel and drilling functions. Fixed control panel with lockable enclosure. Hydraulically folding mast for 4 m drill rods. Mast translation system with 400 mm stroke. Vertical hydraulic feed system. Drill carriage and guide rail system. 4-inch hydraulic drill head Conrad T-4-5-600. Hydraulic tilting system. Weight compensator for drill rod protection. Hose and cable management system. Hydraulic top clamp. Bedpfx Abox Uyukjpocu Hydraulic flushing pump. Prepared for displacement pump installation. Hydraulic piston pump. 3-inch water circuit with flow meter. Flow control valve. Hydraulic breakout clamp. Drill rod storage cassette. Pipe handling manipulator. Automatic lubrication system.

Condition: excellent (used), Year of construction: 2001, sheet width 3100 mm plate thickness 6.0 mm ST pre-bending 4.0 mm ST Bjdpfx Aox Sr Dfobpocu diameter of upper rolls 200 mm side roll diameter 165 mm diameter of lower rolls 190 mm bending speed ca. 5.0 m/min Control DIGI oil volume 80.0 Liter voltage 380 V total power requirement 6.0 kW weight 6000 kg range L-W-H 5250 x 1500 x 1400 mm very good condition (!!) Current new price approx. 80,000 euros Special price on request Features: - Robust electro-hydraulic 4-roll bending machine * 4-roll concept offers a wide range of bending and rounding options - MG swivel control panel * Operation - control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Two central rolls are driven directly by hydraulic motors - Conical rolling possible via inclined position of the rolls - Parallelism of the side rollers via torsion shafts - Bending on both sides - Diameters of up to 1.1 times the upper roller diameter are possible - Forged and hardened rollers with a strength of 53-55 HRC - Low-maintenance, stable machine concept - Permanent lubrication of all bearings - Stable steel welded construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge/pressure display for the rollers - Safety device (safety line with switch unit) - Operating instructions (PDF)

Condition: new, table diameter 490 mm table load 300/150 kg swivelling range 0-90 manuell Grad table load horiz. 300 Kg table load vert. 150 Kg boring diameter 65 mm table turning speeds 0,4 - 4,0 U/min voltage 230 V total power requirement 0,2 kW weight of the machine ca. 0,1 t dimensions of the machine ca. 0,5 x 0,52 x 0,5 m The D-BYT N welding manipulator has a hollow shaft, also known as Spindle bore in the rotary table, which makes inert gas welding possible. the Due to the compact design, turn-tilt tables can be installed in any integrate existing production facilities. Inert gas welding (forming gas). thereby simplified. Bcedpfx Absgvkktepeu Features: - Double foot pedal (start-stop/left-right) included - Infinitely adjustable rotation speed of the table - Suitable for any welding process, even high frequency - Very high stability - compact model - Through hole in the turntable plate - CE marking - Very good value for money

Condition: new, diameter -- mm workpiece length -- mm work piece width 18 mm range of angles 15° - 50° ° weight of the machine ca. 110 kg Chamfering system UZ18 HARDWORKER Maximum bevel width 18 mm with automatic feed The UZ18 Hardworker machine is one of the most powerful automatic feed beveling machines on the market. It is not only suitable for workshops, but also for on- site assembly. The machine has a stepless working angle adjustment system. Thanks to the special design of the drive system, the UZ18 Hardworker is also suitable for harder materials. The machine is equipped with the automatic feed. Working with UZ18 Hardworker is therefore very convenient. *For conventional steel (up to 600 MPA/87022 PSI strength), brass, copper and aluminum materials * For chamfering workpieces with the minimum dimensions of 70 x 150 x 6 mm * Application range of sheet thickness 6 - 40 mm * The bevel angle can be easily adjusted continuously from 15° to 50° without replacing any part * Double-sided bevel (X, K) with no material handling * Easy connection to 3D manipulator for easier operation and handling * Silent working * Equipped with automatic feeder * Stationary or mobile use * The machine works with large workpieces without any support at a speed of 1.9 m/min * Smaller workpieces are placed directly in the machine - Max. bevel width (hypotenuse): 18 mm - Infinitely adjustable angle: 15° - 50° Bedpfx Abjk Egrtspjcu - Area of application sheet thickness: 6 - 40 mm - Motor: 750W - Feed speed: 1.9 m/min - Weight: 110kg - Dimension: 438 x 719 x 644 mm We are happy to offer you an optional 3D manipulator (mobile) for this device on

Condition: new, diameter -- mm work piece width -- mm workpiece length -- mm Chamfering system UZ12 ULTRALIGHT - KIT 30° + 45° Maximum bevel width 12 mm with automatic feed The UZ12 ULTRALIGHT is one of the lightest automatic beveling machines advance in the market. Thanks to its compact size and light weight it is not only suitable for workshops, but also for assemblies. The Machine is equipped with the automatic feed and therefore does this Working with the UZ12 ULTRALIGHT very comfortably. * For conventional steel (up to 600 MPA/87022 PSI strength), Brass, copper and aluminum materials * For chamfering workpieces with the minimum dimensions of 65 x 60 x 3 mm * Application range of sheet thickness 3 - 35 mm * Beveling of pipes from an inner diameter of 95 mm * Variable setting of the desired bevel using an exchangeable holder kit for any given angle * Double-sided bevel (X, K) with no material handling * Silent working * Equipped with an automatic feed * Stationary or mobile use * The machine works with large workpieces without any support a speed of 1.8m/min * Smaller workpieces are placed directly in the machine * Lightweight and compact design, handleable by one operator * Motor thermal protection - Max. bevel width (hypotenuse): 12 mm Bcsder I E Exjpfx Abpsu - Bevel angle: 30° / 45° / 22.5° / 37.5° / 50° (replaceable KIT) - Area of application sheet thickness: 3 - 35 mm - Motor: 400W - Feed speed: 1.8 m/min - Dimension: 470 x 294 x 523 mm We can also offer you an optional 3D manipulator (mobile) for this device on

Condition: new, diameter -- mm workpiece length -- mm work piece width 15 mm range of angles 15-50 ° plate thickness 6-40 mm total power requirement 1,5 kW Feed speed 3,5 m/min. dimensions 530 x 395 x 860 mm weight of the machine ca. 94 kg The UZ15 RAPID machine is one of the fastest beveling machines with automatic feed on the market. It is not only suitable for workshops, but also for assembly work. It has a stepless Bevel angle adjustment system. Also, the machine with an automatic feed equipped. Working with the UZ15 Rapid is therefore very convenient. - For conventional steel (up to a strength of 600 MPA/ 87022PSI), brass, copper and aluminum materials - For chamfering workpieces with the minimum dimensions of 70 x 150 x 6 mm - Application range of sheet thickness 6 - 40 mm - The bevel angle can be easily adjusted from 15° to 50° continuously without that a part needs to be replaced - Double-sided bevel (X, K) without material handling - Easy connection to the 3D manipulator for easier operation and handling - Silent working - Equipped with automatic feeder - Stationary or mobile use Bcodpfok Uqhaex Abpsu - The machine works with large workpieces without any support a speed of 3.5m/min - Smaller workpieces are placed directly in the machine - Reduced price when purchasing UZ15 RAPID together with the 3D manipulator

Condition: new, table diameter 690 mm table load 500 kg swivelling range 0 - 90 Grad table load horizontal 500 Kg table load vertikal 250 Kg boring diameter 100 mm table turning speeds 0,2 - 1,9 U/min Bedpfx Aeh Evt Uobpecu total power requirement 0,37 kW The D-BYT N welding manipulator has a hollow shaft, also known as Spindle bore in the rotary table, which makes inert gas welding possible. the Due to the compact design, turn-tilt tables can be installed in any integrate existing production facilities. Inert gas welding (forming gas). thereby simplified. Features: - Double foot pedal (start-stop/left-right) included - The new welding table D-BYT-500N includes, in addition to the standard start/ Stop foot pedal also an extra remote control (on the cable). - Infinitely adjustable rotation speed of the table - Suitable for any welding process, even high frequency - Very high stability - compact model - Through hole in the turntable plate - CE marking

Condition: new, diameter -- mm workpiece length -- mm work piece width 12 mm range of angles 30/45/22,5/37,5/50 ° weight of the machine ca. 30 kg Chamfering system UZ12 ULTRALIGHT - KIT 30° + 45° Maximum bevel width 12 mm with automatic feed The UZ12 ULTRALIGHT is one of the lightest automatic beveling machines advance in the market. Thanks to its compact size and light weight it is not only suitable for workshops, but also for assemblies. The Machine is equipped with the automatic feed and therefore does this Working with the UZ12 ULTRALIGHT very comfortably. * For conventional steel (up to 600 MPA/87022 PSI strength), Brass, copper and aluminum materials * For chamfering workpieces with the minimum dimensions of 65 x 60 x 3 mm * Application range of sheet thickness 3 - 35 mm * Beveling of pipes from an inner diameter of 95 mm * Variable setting of the desired bevel using an exchangeable holder kit for any given angle * Double-sided bevel (X, K) with no material handling * Silent working * Equipped with an automatic feed * Stationary or mobile use * The machine works with large workpieces without any support a speed of 1.8m/min * Smaller workpieces are placed directly in the machine * Lightweight and compact design, handleable by one operator * Motor thermal protection - Max. bevel width (hypotenuse): 12 mm - Bevel angle: 30° / 45° / 22.5° / 37.5° / 50° (replaceable KIT) - Area of application sheet thickness: 3 - 35 mm Bcodpfx Ajppgcysbpju - Motor: 400W - Feed speed: 1.8 m/min - Dimension: 470 x 294 x 523 mm We can also offer you an optional 3D manipulator (mobile) for this device on

Condition: new, pressure 40.0 t stroke 285 mm flat steel 250 x 24 mm working feed 10.0 mm/sec return speed 10.0 mm/min work height max. 930 mm table: 660 x 1250 mm total power requirement 4.0 kW motor 400 Volt 50 Hz oil volume 40.0 l weight 800 kg range L-W-H 1450 x 800 x 1300 mm Furnishing : - electro-hydraulic horizontal bending machine - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel Bodpfx Abjxabhmopscu - Digital display for stroke setting * * Programming of 1x bend end point & 1x retract point possible - 1x tool set (1x bending punch / 1x 1V die) - infinitely variable adjustment of the bending speed and pressing force - 1x manual material stop - Free-moving dual footswitch - Machine can be moved with a pallet truck/stacker - Operation manual

Condition: used, Year of construction: 1992, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 205 mm side roll diameter ~ 195 mm Control konv. oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 3200 kg range L-W-H 4500 x 1500 x 1300 mm Features: Bedpoxacdvofx Abpscu - Robust electro-hydraulic 3-roll bending machine - 3-roll concept offers a wide range of bending and rounding options - Pivoting control unit at the front * Operation - Control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Sturdy welded steel construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge / pressure indicator for the rolls - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)