Used Forging Manipulator for sale (476)

Condition: used, temperature max. . ° internal length of the oven . mm internal width of the oven . mm internal height of the oven . mm Annealing furnace with extraction system Make: Helmut Peiler 2 pieces available Kljdpfx Ajytx Rmobvop

Condition: used, Electric dual screwdriver unit with automatic feed and pneumatic double stroke, mounted on handling device, handling system, manipulator for screwdriving technology. Screwdriving Unit: BÖLLHOFF / BOSCH REXROTH Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual screwdriver unit features a pneumatic double stroke via Festo valves and cylinders. Various monitoring systems are installed to enable full automation. Screwdriver 1 consists of the following components: - Rexroth type servomotor - Rexroth type 0 planetary gearbox - Rexroth type 0 encoder - Rexroth type 0 straight drive head Screwdriver 2 consists of the following components: - Rexroth type servomotor - Rexroth type 0 planetary gearbox - Rexroth type 0 encoder - Rexroth type 0 offset drive head Dimensions (WxHxD): 165 x 1000 x 200 mm Pneumatic long stroke: 30 mm Pneumatic short stroke: 20 mm Screwdriver spring travel: 20 mm Last screws used: M6 x 15 mm Electric screwdriver unit Rexroth Servomotor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm/A Kodpfx Abefx Hyfovslp Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current draw: max. 7 A Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material No.: 0 Efficiency: 90% Reduction ratio: i=18.9 Max. torque: 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material No.: 0 Nominal torque: 12 Nm Reduction: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight drive head Rexroth Type: 2GA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction: 1 Weight: 0.2 kg Installation length: 90 mm Offset drive head Rexroth Type: 2VNA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction: 1 Weight: 0.6 kg Installation length: 153 mm Handling system: JÄGER HANDLING Type: Handy-flex 300 Horizontal movement: 400 mm Vertical movement: 450 mm Load capacity: max. 14 kg Handyflex reach: 250 to 650 mm Handyflex reach (swung out): max. 860 mm Swivel radius at full extension: max. 360° Guide column vertical: Ø 30 mm Guide columns horizontal: Ø 20 mm - Balancer for vertical movement - Adjustable load capacity - Adjustable stop for limiting swivel radius Dimensions (L x W x H): approx. 1150 x 650 x 1400 mm Total weight: approx. 90 kg Good condition Without the blue steel pallet as base plate Blue steel base plate is not included in the scope of delivery.

Condition: used, 2-axis removal machine, inserter, servo robot, workpiece gripper, pick-and-place machine, removal robot Removal device, handling device for presses, lathes, etc. GETECHA Type GL-20S No. 13836 Year of manufacture 10/2003 Z-axis travel 1900 mm Kljdpfeharwyox Abvep Travel distance Y-axis 250 mm Travel speed Z-axis max. 1100 mm/sec. Travel speed Y-axis max. 227 mm/sec. infinitely variable travel speed in Y- and Z-axis via SMB servomotors - precise axis movement via linear guides - epis control system - Control panel opposite - Control for conveyor belt, gripper magnets, bead breaker cylinder, vacuum, gripper - External monitoring inputs for emergency stop, press open, press closed, safety doors closed, automatic - Mounted gripper with 3 lifting magnets, 3 pneumatic push-off cylinders (30 mm stroke), 1 pneumatic clamping cylinder (40 mm stroke) - Operating hours 25998 hrs. The system was used as an inserter/removal device on a press. Space requirement L x W x H 2900 x 1800 x 2000 mm Weight approx. 800 kg good condition

Condition: used, mileage: 92,135 km, power: 450 kW (611.83 HP), fuel type: gasoline, gearing type: automatic, first registration: 02/2023, next inspection (TÜV): 02/2026, emission class: euro6, color: grey, number of seats: 7, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), immobilizer system, navigation system, parking heater, Special Equipment: * AMG Driver's Package * Rear Comfort Plus Package * Brake calipers painted red * Anti-theft Protection Package Plus * Driving Assistance Package Plus * AMG Floor Mats * Head-up Display (front visual display) * Inductive charging pad for smartphone in rear * Interior trim: designo ash wood, black * AMG steering wheel buttons * Alloy wheels front/rear: 10x23 / 11.5x23 (AMG, forged wheel, multi-spoke, matte black) * Night Package (AMG) * Panoramic sliding sunroof * Rear side airbags * Soft-close doors * Sports exhaust system (AMG Performance) * Side running boards (aluminum) * Warmth Comfort Package * Additional heater (auxiliary heater) * Driver/passenger airbag * Ambient lighting * AMG Track Pace (APP) * Drive type: All-wheel drive * Dashboard in Artico leatherette * Energizing Package, front pelvis airbag (Pelvisbag) * Brake system with large discs (high-performance braking system) * Chrome package * DAB tuner (digital radio reception) * Standard design and equipment line * Sports design stainless steel pedals * Illuminated door sills * Electric motor 16 kW (hybrid drive) * Assistance system: Active Brake Assist * Assistance system: Active Lane Keeping Assist * Assistance system: Speed Limit Assist * Vehicle setup (online services / apps) * Vehicle monitoring (vehicle tracking system) * Electric windows front + rear * Front bumper * Luggage compartment cover / roller blind * Tailgate with automatic opening and closing system * Rear bumper * Inductive charging pad for smartphone * Black headliner * ISOFIX child seat mounts on rear seat * Body type: 5-door * Automatic climate control (THERMOTRONIC) * Driver’s knee airbag * Instrument cluster with variable display (Widescreen Cockpit) * Comfort headrests in front * Communication module (LTE) pre-installation for Mercedes me connect * Window airbag system (windowbag) * Fender flares * Speaker system with center speaker + bass box * Steering wheel (AMG Performance, Nappa) * Sport steering wheel with multifunction * Memory package Kedpfx Asym Izbobvolp * Mercedes-Benz emergency call system * Metallic paint * Mild hybrid 466 kW (engine 4.0 L - 450 kW) * Bonnet with power dome * Multibeam LED * Multicontour seats in front * Navigation system: hard drive navigation * Park Package with 360° camera * Wheelbase 3135 mm * Tire pressure monitoring system * Low-emission according to Euro 6d emission standard * Heated windscreen washer system * Front side airbags * Passenger airbag occupancy sensor * Seat upholstery: Nappa leather * Integrated smartphone * Mirror package * Sports suspension (AMG Active Ride Control) * Sports suspension (AMG Ride Control +) * Enhanced voice control system (MBUX) * Standard interior * Burmester Surround Sound System * USB ports * AMG trim / side skirts * Preparation for navigation services * Head-up display * Ambient lighting ----Vehicle number: 11833----Errors and prior sale excepted----Advertising and various decals have been digitally removed. ----We are happy to assist you with all formalities arising from purchasing a vehicle. Please simply share your requests and suggestions with us and we will take care of everything. Among other things, we can offer you the following services for an additional charge: - Trade-in of your old vehicle - TÜV/SP inspection - Complete export processing - Financing brokerage - Application for export license plates - Vehicle transport - Registration services

Condition: used, TECHNICAL DETAILS - Parts per minute : 300 - Cutting diameter : 6 [mm] - Die ejection : 55 [mm] - Floor space (width) : .97 [m] - Floor space (length) : 2.77 [m] - Motor : 7.5 [hp/kW] - Net Weight : 3500 [kg] - Gross Weight : 4100 [kg] EQUIPMENT - Tooling as per photo - Positive ejection on 2 punches Kodsuhb T Djpfx Abvelp - Ejector retraction in die - Various spare parts

Condition: used, TECHNICAL DETAILS - Parts per minute : 300 - Cutting diameter : 6 [mm] - Die ejection : 55 [mm] Kljdpfxouhb Twj Abvsp - Floor space (width) : .97 [m] - Floor space (length) : 2.77 [m] - Motor : 7.5 [hp/kW] - Net weight : 3500 [kg] - Gross weight : 4100 [kg] EQUIPMENT - Equipped with ejector recoil between rough part and finishing (RLKO) - Positive ejection (TKO) - Tooling as per photo

Condition: used, TECHNICAL DETAILS - Parts per minute : 450 - Cutting diameter : 4 [mm] - Die ejection : 25 [mm] - Floor space (width) : .74 [m] - Floor space (length) : 1.88 [m] Klodouhb Tqepfx Abvsp - Motor : 4 [hp/kW] - Net Weight : 1600 [kg] - Gross Weight : 2100 [kg] EQUIPMENT - Tooling as per photo

Condition: used, TECHNICAL DETAILS - Parts per minute : 400 - Rivet length : 12 [mm] - Drilling depth (max.) : 5 [mm] - Cutting diameter : 3 [mm] - Floor space (width) : 1.12 [m] - Floor space (length) : 2.21 [m] - Height : 1.77 [m] Kledsuhb Tkopfx Abvjp - Motor : 4 [hp/kW] - Net weight : 2,500 [kg] - Gross weight : 3,000 [kg] EQUIPMENT - Tooling as per photo

Condition: like new (used), Year of construction: 2009, travel distance X-axis: 200 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 280 mm, controller manufacturer: HEIDENHAIN iTNC530, workpiece weight (max.): 15 kg, table width: 200 mm, table length: 200 mm, spindle speed (min.): 42,000 rpm, Control CNC: HEIDENHAIN iTNC530 Axes X-axis travel mm: 200 Y-axis travel mm: 220 Z-axis travel mm: 280 C-axis degrees: 360º A-axis degrees: -15º max.130º Work Table Table dimensions mm: ø200 Maximum workpiece weight kg: 15 Spindle Spindle speed rpm: 42.000 Cooling Cooling through the spindle bar: 40 Tool System Tool holder: HSK-E32 Tool magazine slots: 60 Max. tool diameter mm: ø50 Max. tool length mm: 200 Chip-to-chip time s: 10 Equipment Automation LM100 (EROWA ITS72, 5 levels of 9 positions); 10 kg maximum manipulation Electronic handwheel Chip conveyor Infrared probe High-pressure pump NC rotary tilting table Rated power kVA: 40 Ksdpoxpg H Hsfx Abvolp

Condition: used, Year of construction: 1997, functionality: fully functional, clearance between the columns: 579 mm, casting force: 350 N, stroke length: 420 mm, column diameter: 125 mm, overall weight: 12,000 kg, power: 22 kW (29.91 HP), Locking Force: 350 metric tons Tie Bar Diameter: 125 mm Clearance Between Tie Bars: 579 x 579 mm Die Thickness (Minimum - Maximum): 300 - 700 mm Die Stroke: 420 mm Moving Platen Size: 940 x 940 mm Injection Position: -125 mm Power Requirement: 22 kW Machine Weight: 11,974 kg (26,400 pounds) Klodpfxev D Dwpj Abvjp Sold with trimming press and manipulator.

Condition: new, Horizontal Bending Machine Fastech FP 30 Description • Pressure: 30t • Stroke: 285mm Kledpfx Aofg Eu Uobvep • Max. tool height: 250mm • Flat bar on the tall edge: 200 x 18mm • Working speed: 10.0mm/sec • Return speed: 10.0mm/sec • Working height: 930mm • Table: 660 x 1250mm • Total power requirement: 3.0kW • Motor: 400 Volt 50Hz • Weight: 850kg • Dimensions (L-W-H): 1250 x 650 x 1250mm • Oil capacity: 40.0l Equipment: • Hydraulic horizontal bending machine • Solid work surface made of stabilized steel • Machine made from hardened and ground forged steel • Digital stroke adjustment display • 1x tool set • Double foot switch

Condition: new, Tubend horizontal bending machine HP 40 Pressure: 40t Stroke: 300mm Max. tool height: 250mm Flat bars over the high edge: 200 x 24mm Flat bar over the high edge: 250 x 16mm Working speed: 10,0mm/sec return speed: 10,0mm/sec table: 600 x 1200mm Total power requirement: 4 kW Motor: 400 Volt 50Hz weight: 1190 kg dimension L-W-H: 1250 x 650 x 1300mm Kodpfoi Elunjx Abvslp Oil capacity approx.: 40,0l Equipment: Hydraulic horizontal bending machine Solid working surface made of stabilized steel Machine made of hardened and ground forged steel NC touch screen control 1x set of tools Double foot switch

Condition: new, Horizontal bending machine Fastech FP 40 Description - Pressure: 40t Kjdpsfg Eu Rsfx Abvjlp - Stroke: 285mm - Max. tool height: 250mm - Flat bar over high edge: 200 x 24mm - Working speed: 10,0mm/sec - Return speed: 10,0mm/sec - working height: 930mm - table: 660 x 1250mm - total power requirement: 4,0kW - Motor: 400 Volt 50Hz - weight: 1100kg - dimension L-W-H: 1250 x 650 x 1250mm - Oil capacity: 40,0l Equipment: - Hydraulic horizontal bending machine - Solid working surface made of stabilized steel - Machine made of hardened and ground forged steel - Digital display for stroke adjustment - 1x set of tools - Double foot switch

Condition: new, Horizontal bending machine Fastech FP 20 Description - Pressure: 20t Klsdpfofg Evdsx Abvep - Stroke: 185mm - Max. tool height: 200mm - Flat bar over high edge: 200 x 12mm - Working speed: 10,0mm/sec - Return speed: 10,0mm/sec - working height: 930mm - table: 480 x 1060mm - total power requirement: 2,2kW - Motor: 400 Volt 50Hz - weight: 530kg - dimension L-W-H: 1150 x 480 x 1200mm - Oil capacity: 12,0l Equipment: - Hydraulic horizontal bending machine - Solid working surface made of stabilized steel - Machine made of hardened and ground forged steel - Digital display for stroke adjustment - 1x set of tools - Double foot switch

Condition: new, Tubend Horizontal Bending Machine HP 20 Description Pressure: 20t Stroke: 200mm Max. tool height: 200mm Flat bar over high edge: 200 x 12mm Working speed: 10,0mm/sec Return speed: 10,0mm/sec table: 550 x 1100mm Kjdpji Elvhjfx Abvelp total power requirement: 2,2kW Motor: 400 Volt 50Hz weight: 640kg dimension L-W-H: 1220 x 600 x 1220mm Oil capacity approx.: 12,0l Equipment: Hydraulic horizontal bending machine Solid working surface made of stabilized steel Machine made of hardened and ground forged steel NC touch screen control 1x set of tools Double foot switch

Condition: new, Bernardo universal lathe Compact 400 V Technical specifications Top width 850 mm Tip height 200 mm Swing over bed 400 mm Swing over cross slide 245 mm Bed width 260 mm Spindle hole 52 mm Spindle mount DIN 55029, D1-5 Speed range, 2 levels 50-450 / 450-2500 RPM Range of longitudinal feeds (20) 0.025 - 2 mm / Rev Area plan feeds (20) 0.012 1 mm / Rev Metric threads (26) 0,2-14 mm Inch thread (42) 1-80 Gg/1 " Quill diameter 50 mm Tailstock runner way 120 mm Spindle mount MT 3 Power 5,5 kW (7,5 HP) Machine dimensions (W x D x H) 1900 x 1000 x 1610 mm Weight approx. 1185 kg Properties Standard with Delta frequency inverters for high torque in the lower revs and nearly constant speed under load Infinitely variable speed control, the set speed can be read off on a digital display Kljdpfx Abed Ertrsvsp To minimize vibration influences the massive Prism bed is equipped in addition with ribs Versatile applications in general engineering, production, item creation... Modern main spindle bearings with angular contact ball bearings in precision design The machine bed, cast in one piece, is extremely rigid and vibration, which satisfies an essential prerequisite for precise turning Space-saving installation possibility through to the front pull-out chip tray Standard with 52 mm spindle bore for manipulating large wave

Condition: used, Anvil with round and square horn Standard anvil, Bohemian design Face width: 160 mm Face length: 530 mm Kljdpfx Aboyk Hrmevop Horn length: 250 mm Anvil weight: 190 kg Height: 350 mm Base: 430 x 310 mm - 28 mm square hole for anvil tools - Drop-forged, hardened Dimensions (L x W x H): 780 x 310 x 350 mm Anvil weight: 190 kg Good condition, very bright ring, good quality

Year of construction: 2000, condition: used, OMSG brand ROTOFLOW 170-N drum shot blasting machine with automatic feed tower, year 2000 Used drum shot blasting machine Continuous belt shot blasting machine for shot blasting of aluminum, brass or steel forgings, screws and bolts. Automatic feed tower. Inverter turbines Special valves with two positions Filter. Klodpfxjt Ag Udj Abvep

Year of construction: 2000, condition: good (used), used drum shot blast machine Brand: OMSG Type: ROTOFLOW Model: 170-N Year 2000 Registration: 10371/00 Continuous belt shot blasting machine for sandblasting/shot blasting aluminum injection, brass or steel forgings, screws and bolts. Automatic feeding tower. Max unit weight of the piece: 8kg Kedpfsmza S Esx Abvolp Turbines: 2 x 11kw Turbine diameter: 350mm inverter turbines Special two position valves Filter CURRENT STATUS: Disassembled and stored in our facilities.

Condition: good (used), Year of construction: 2019, functionality: fully functional, Machine type: Amada - Schubert High Performance Saw used Make: AMADA - Schubert Type: CMB-100 CNC / TRB-SAV Year of construction: 2019 with thin blade technology in standard version, fully automatic Cutting range: 25-101 mm Blade feed: 0-30 mm/sec Saw blade: 360 x 40 x 2.5 Cutting speed: 56-210 min Weight: 2800 kg further technical details on request Heavy duty feeding system for automatic separation of round and square material from 30 - 100 (140) mm and up to 8 m in length Brief description: Our feeding systems are particularly low-maintenance and robust. They are mainly used in heavy-duty areas and forging operations. 1 piece SAV 140/8 V-conveyor in standard design for processing bars up to 8 m in length. Make: Schubert General: Dimensions (L/W/H): 6500 mm/ 1500 mm/ 1500 mm Support weight: approx. 5 tons Transfer height: variable Number of supports: 4 pieces at a distance of approx. 1600 mm Drive: 2.2 kW geared motor with brake + friction clutch Kledpfx Abjuv Hlkjvjp

Condition: new, Year of construction: 2025, Sawmill Viking VBS1400 Log bandsaw with double cut bandsaw blades. Cuts back and forth!!! Roller diameter: 1000mm Bandsaw blades: double-sided = 150mm wide, single-sided = 140mm wide Blade speed: infinitely variable, 0 - 45m/s Feed speed: 0-60m/min. Log diameter: up to 1400mm (max. 1600mm) Cutting length: 6m (up to 12m extension possible, not included) Saw head: 3500 kg Digital cutting thickness adjustment via CNC touch panel Manual control unit with joystick Cutting view via green laser and video monitoring 30 kW saw motor Frequency converter 30kW - infinitely adjustable to regulate the saw blade speed for different types of wood Blok manipulation: Hydraulic Condition: New Klodpfx Aeyuy Ebobvjp

Condition: new, Year of construction: 2023, Industrial heavy duty trailer with a payload of 30 tons on 60% of the loading area at 6 Km/h. The trailer has heavy duty Vulkollan drums with a height to loading area of 510 mm. The loading area has the dimensions 6000 x 2400 mm. The transport floor is lined with 40 mm spruce The steering is all-wheel steering and the drawbar is 1600 mm long with drop safety device and forged towing eye with hole 40 mm. Kjdpfxjkz Uyuj Abvjlp On the outer frame there are 6 stops for securing the load on each long side. The paint is in RAL 2000 or 2004 in new production gladly on customer request.

Condition: used, Vacuum pump, ATEX, Elmo G400Capacity: 440 mbarVacuum manipulator + jib arm (max. 50 kg)Application: Handling bags and cartons Kjdpfxoyfw H Ds Abvolp

Year of construction: 2015, condition: good (used), functionality: fully functional, machine/vehicle number: A-150016, AUTOMATED ADHESIVE APPLICATION MACHINE, GANTRY SYSTEMS, AND AUTOMATED METAL INSERT PLACEMENT UNIT This system is part of a larger production line; please refer to our other listings for more information. The offered system includes 3 provision stations for facing sheets, an automated adhesive application machine for sandwich panel bonding, a lay-up conveyor for manual assembly of the inlay/ribbing, gantry systems for manipulating the facing sheets, and an automated placement unit for metal inserts/reinforcement points. COMPONENT DIMENSIONS (from previous production): Kledpfx Ajyt Nm Sebvsp L/W min: 2000mm x 1500mm L/W max: 8000mm x 2500mm H min: 12mm H max: 60mm MATERIALS (from previous production): GRP, sheet metal, plywood, wood/PU strips, PVC, Styrofoam GLUING GANTRY FOR CONTOUR & SURFACE BONDING (of the facing sheets & inlays): Number of needle valves surface: 104 Number of needle valves contour: 1 Adhesive system: 1K-PUR Number of nozzles in water spray unit: 8 AUXILIARY UNITS: Climate chamber (storage for 1K-PUR adhesive) Vacuum pump for gantry systems Punching unit

Condition: used, For inquiries regarding the attachment, Mr. Herden will be pleased to assist you (by phone). Seppi M. MINI-BMS 105 / 5–10t / Forestry Mulcher / CUT CONTROL / Demo unit / Rotary drive / Year of manufacture: 2023 / in stock & immediately available Price: €18,990.00 net / €22,598.10 gross Kodpfx Ajymi Najbvslp - Working width: 1.05 m - Total width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulcher for excavator mounting - For mulching along riverbanks, in forests, and other hard-to-reach areas - Mulches brush and wood up to 10 cm diameter - For excavators from 5–10 tonnes - For mounting on various interface plates - Drive designed for hydraulic motor depending on carrier unit oil flow - Indirect belt drive with 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge along entire length of the hood - Front guard with chains - Rear guard with chains - Reinforced, height-adjustable skid runners with hard metal base plate - Colour: red RAL3020 · anthracite RAL7021 OPT 228 Forestry rotor with fixed MINI DUO tools (2 carbide inserts) 21 pcs, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 291 VARIO FLOW Axial piston hydraulic motor with variable displacement 29–58 cm³ and overpressure valve - Displacement (min-max): 29–58 cm³ - Required hydraulic pressure (min-max): 150–250 bar - Required hydraulic oil flow (min-max): 60–130 l/min OPT372 hydraulic 190° rotation device OPT158 12V solenoid valve for opening the rear hood Optional: MS08 adapter plate incl. bolts and installation = €880.00 net We have a wide range of adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. An autonomous hydraulic system is recommended for operation. Three hydraulic lines are required: supply, return, and drain. For the hydraulic hood, a double-acting hydraulic connection is also needed. The unit is supplied without hoses, connectors, and adapter plate. We are an official Seppi M. sales and service partner, as well as dealer and service partner for Westtech Woodcracker, DMS, Magni telehandlers, JCB construction machinery, Mercedes-Benz, and Iveco. With 800 used commercial vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete range of Seppi M. equipment for you! Errors and prior sale excepted! Internal ref.: 170068 = More information = Please contact Marius Herden for more details.