Used Forging Manipulators for sale (477)

Condition: ready for operation (used), Erfurt Trimming press PKZe 500/1000 Power 500 to Table dimension 1020x1420 mm Stroke 400 mm No of strokes / min - 12 Djdpfxjvbcxts Ag Toki Main motor 41kw Movie available

Condition: excellent (used), Year of construction: 1983, overall weight: 35,000 kg, Energy of blow: 3 600 kgm Ram weight: 1 250 kg. Max. ram stroke: 800 mm Number of strokes per minute: 110 Total weight: 35 ton Anvil weight: 24 ton Djdjtgpdzjpfx Ag Tjki

Condition: excellent (used), Year of construction: 1981, overall weight: 64,000 kg, Energy of blow: 7 000 kgm Ram weight: 2 380 kg. Dkedpfelnk Tyjx Ag Toi Max. ram stroke: 950 mm Number of strokes per minute: 100 Total weight: 64 ton Anvil weight: 47 ton

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, pressing force: 4,000 t, Forging hammer SMERAL type KJH 4 Pneumatic-hydraulic die counterblow forging hammer. Weight of the ram, kg: 1,800 Ram impact rated energy, kgm: 4'000 Number of ram strokes, 1/min: 48 Ram stroke, mm: 500 Die camping area, mm: 286 x 600 Min. Die Height, mm: 350 Output of main motor, kW: 45 Length of the machine, mm: 3'100 Dsdswbginepfx Ag Toki Width of the machine, mm: 1'900 Height of the machine, mm: 3'900 Weight of the machine, kg: 27'000

Condition: good (used), Year of construction: 1978, functionality: fully functional, Hot forging hammer 5 ton Kramatorsk type M2147 Nominal weight of dropping parts: 5000 kg Actual mass of dropping parts without upper die: 5080 kg Energy of blow: 12 500 kgm /125 kJ/ Max. number of strokes per minute: 50 Ram stroke: 1300 mm Min. distance ram – die holder: 400 mm Distance between columns: 800 mm Die length: 950 mm Die holder length: 1180 mm Dimensions /L x B x H/: 3000 x 2000 x 6470 mm Bottom anvil weight: 23 t Upper anvil weight: 77 t Total weight 140 t + Trimming press Voronez type K9538 Capacity, ton: 630 Stroke 400 mm Table size (left to right) 1250 mm Table size (front to back) 1250 mm Ram adjustment 180 mm Strokes 20/15 min-1 Shut height 750 mm Upper ejector: power 20 t, stroke 125 mm Driving power 32 kW Dedpfslnlq Dox Ag Teki Driving power overall 58 kW Required space 3280 x 3470 mm Height of machine above floor 6190 mm Total weight 53 ton

Condition: ready for operation (used), Romanian Forging Hammer CM 3150 Dkodpfxjw Sdwvs Ag Toi The hammer is similar to Huta Zygmunt MPM 10000B. - Maximum impact energy at maximum stroke – 10,000 kgm; - Ram weight – 3,150 kg; - Mode of operation – pneumatic; - Ram stroke – 900 mm; - Number of blows per minute – 90; - Working pressure – 5 – 7 bar; - Anvil weight – 63 t - Total weight – 100 t.

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, overall weight: 100,000 kg, workpiece weight (max.): 18 kg, Forging hammer HUTA ZIGMUNT type MPM 3000 The same type as MPM 10000 Energy of blow: 10 000 kgm Dkodpfx Aolnllbeg Toi Ram weight: 3 570 kg. Max. ram stroke: 1 000 mm Number of strokes per minute: 90 Total weight: 100 ton Anvil weight: 70 ton The hammer is equipped with modern CNC lubricating unit and set of anti-vibration pads. AHAT SK Ltd., Bulgaria +359 889 433449

Year of construction: 2022, condition: new, Attachment suited for: Construction machines The high speed manipulator on the pictures is manufactured for casting factory. They put the the materials into the grinding process. Dkodpen Tm Sxjfx Ag Tei We can manufacture boom-arm in hydraulic or electrical systems with breaker, bucket, grapple etc.. For detailed information please contact us

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: TD2002, Schmalz Vacuum Lifter with 50kg Payload / Lifting Capacity Dimensions: 30 x 30 x 30 cm, Weight: 11 kg Dkodpsupyn Rsfx Ag Tji Equipped with 1 suction pad, approx. 150 mm diameter 1 compressed air connection Good condition, see pictures Item location: 75053 Gondelsheim Shipping via freight forwarder or collection by appointment only

Year of construction: 2022, condition: new, Height adjustable L manipulator Load: 500kg Stroke: 640mm, height faceplate min. 480, max. 1.110mm Pivoting range: +/-185 face plate diameter: 800mm Welding current: 400A Torque face plate: 900Nm Torque swivel arm: 900Nm Total length: 2.495mm Height: 1.855mm Width: 900mm The rotary stand is controlled by a hand-held remote control with the following functions: - LIFT arm - arm LOWER - Arm swivel RIGHT - Arm give LEFT Dodpfx Aoh Td Theg Teki - Potentiometer for the stepless SPEED- adjustment of the faceplate For the control of the face plate a two-pedal foot switch is available with the functions: - face plate rotation RIGHT - face plate rotation LEFT

Year of construction: 2022, condition: new, Height adjustable rotary tilt table Load: 500kg Stroke: 1.015mm, height faceplate min. 345, max. tilt angle 120°. Face plate diameter: 800mm Welding current: 400A Torque face plate: 1.300Nm Total length: 2.365mm Height (housing): 1.030mm The rotary tilt table is controlled by pushbuttons on the machine housing with the following functions: - LIFT arm - Arm LOWERING - Potentiometer for the stepless SPEED- adjustment of the face plate For the control of the face plate a two-pedal foot switch is available with the functions: Dkjdsh Tfbzspfx Ag Toi - face plate rotation RIGHT - face plate rotation LEFT

Year of construction: 2022, condition: new, Manipulator with two height adjustable outriggers and face plate. Load: 1.500kg stroke: 800mm swivel range: 300 face plate diameter: 1.000mm Welding current: 600A Dksdpsfnku Hsfx Ag Tji

Condition: good (used), Forged gripper, manipulator forged gripper, sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 0 to 250 mm -Load capacity: 1,000 kg -Quantity: 1 piece available -Dimensions: 730/240/H860 mm -Weight: 118 kg Dkjdpedavnzefx Ag Tei

Condition: good (used), Forged gripper, manipulator forged gripper, sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Manufacturer: VEB, Material gripper type B04-Z10-1 Dkodpfslntntjx Ag Tji -Load capacity: 1,000 kg -Wingspan: see photos -Dimensions: 280/190/H320 mm -Weight: 21 kg

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, load capacity: 16 kg, arm reach: 1,611 mm, controller manufacturer: KUKA, controller model: KRC2 ED05, The KR 16 F is a compact foundry robot built to operate in high-temperature, dusty, and wet environments. With a 16 kg payload and 1610 mm reach, it delivers precise handling in casting, forging, and other demanding processes. Main Applications: - Welding - Dispensing - Additive Manufacturing Model: KRC2 ED05 KR 16-F Condition: Used Year: 2006 (more option is available) Dsdpow Nawyefx Ag Tski Controller Cabinet: KRC2 ed05 Included: Manipulator + KRC2 Control Cabin + All Wire Sets + Teach Pendant Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman. (Source: KUKA's Website)

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, Used upsetting press with inductive heating, for solid material diameter: 12 mm - 60 mm Manufacturer: GFU Model: HP 200 Year of manufacture: 2009 Dsdpeycl Idsfx Ag Tski Serial no.: 09/1025 with extensive accessories

Condition: new, pressure 40.0 t stroke 285 mm flat steel 250 x 24 mm working feed 10.0 mm/sec return speed 10.0 mm/min work height max. 930 mm table: 660 x 1250 mm total power requirement 4.0 kW motor 400 Volt 50 Hz oil volume 40.0 l weight 800 kg range L-W-H 1450 x 800 x 1300 mm Furnishing : - electro-hydraulic horizontal bending machine - large, robust machine table made of hardened steel Dedpoxabhmofx Ag Tjki - Machine made of hardened and ground forged steel - Digital display for stroke setting * * Programming of 1x bend end point & 1x retract point possible - 1x tool set (1x bending punch / 1x 1V die) - infinitely variable adjustment of the bending speed and pressing force - 1x manual material stop - Free-moving dual footswitch - Machine can be moved with a pallet truck/stacker - Operation manual

Condition: new, pressure 20.0 t stroke 185 mm flat steel 200 x 12 mm working feed 10.0 mm/sec return speed 10.0 mm/min work height max. 930 mm table: 480 x 1060 mm total power requirement 2.2 kW motor 400 Volt 50 Hz Djdjxabtvspfx Ag Toki oil volume 12.0 ltr. weight 530 kg range L-W-H 1150 x 480 x 1400 mm Furnishing : - electro-hydraulic horizontal bending machine - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting * Programming of 1x bend end point & 1x retract point possible - 1x tool set (1x bending punch / 1x 1V die) - infinitely variable adjustment of the bending speed and pressing force - 1x manual material stop - Free-moving dual footswitch - Machine can be moved with a pallet truck/stacker - Operation manual

Condition: new, pressure 80.0 t Dkodpoxabhasfx Ag Tei stroke 285 mm flat steel 300 x 25 mm working feed 10.0 mm/sec return speed 10.0 mm/min work height max. 930 mm table: 750 x 1425 mm total power requirement 10.0 kW motor 400 Volt 50 Hz oil volume 120 l weight 1700 kg range L-W-H 1500 x 750 x 1800 mm Furnishing : - electro-hydraulic horizontal bending machine - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting * * Programming of 1x bend end point & 1x retract point possible - 1x tool set (1x bending punch / 1x 1V die) - infinitely variable adjustment of the bending speed and pressing force - 1x manual material stop - Free-moving dual footswitch - Machine can be moved with a pallet truck/stacker - Operation manual

Condition: used, Year of construction: 2021, machine/vehicle number: 127 0167, ID No.: 1063916, with raised seat; no documents available! No further accessories included! Dsdpsyn Niiefx Ag Teki

Condition: used, Year of construction: 2016, functionality: fully functional, Braukon 50hl brewhouse containing a Mash Ton, Lauter Ton and Wort Kettle in the main skid. Skid also contains Whirlpool and Chilled Liquor Tank also. Worth Kettle contains a vapour condenser (heat exchanger) that recovers heat from venting steam to prep the water for the next brew etc. (Returns 15HL hot liquor at 86°C per brew at 4% evaporation) Condenser is only 18-24 months old. Brewhouse is almost completely automated with the exception of hops and salts dosing (that need to be added through the hatches in the brewing vessels), and the cleaning of the Whirlpool (manipulation of hand valves, turning water supply / pump on/off on the control screen). Brewhouse was commissioned in 2015 Braukon have traveled to service it every year since we've had it, so would expect it to be in much better condition than other similarly aged brewhouses operated by small businesses. Brewhouse was completely CIP'd after every use. CIP System available also. Brewhouse is easily capable of doing 18 brews a week on 18/5, but was never worked even close to that potential. -Mash Kettle "Alloysius" Mash Hydrator Steam jackets and mash mixer (agi.) for temperature stepped mashing -Lauter Tun Maximum charge around 1100Kg malt Discharge via positive displacement "Seepex" pump Dsdpfxoymycks Ag Teki -Wort Kettle 55hl maximum capacity Vapour Condenser – recovers heat from boiling as hot water returned to Hot Water Tank -Whirlpool Brew length is 50hl i.e. you get about 5000L of wort (beer before it's been fermented) out of each brew. Will complete a brew every 4 hours Estimated 3000 to 3400 brews in it's total lifetime.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 99 h, This Yaskawa GP25-12 was manufactured in 2021. It's a robust robot arm with a maximum payload of 500 kg and a rated torque of 2040 Nm. Weighing 260 kg, it's designed for heavy-duty tasks. If you are looking to get high-quality robotic handling capabilities, consider the Yaskawa GP25-12 machine we have for sale. Contact us for more information. Dkodpfx Agjx D Dw Eo Tsi • Maximum payload: 500 kg • Rated torque: 2040 Nm • Payload: 12 kg • Mass: 260 kgYaskawa GP25-12 robot system (less than 100 operating hours)Fully functional. No defects.1x Manipulator 6VXH25-12 YRC1000 FloorApplication: other handling1x Cable set S Robot 6m ger YRC10001x Control 6VXH12/6VXH25 YRC1000 CE MA1x Initialisation YR-1-06VXH25-A101x Teachbox JZRCR-APP01-1 YRC10001x Language German Teachbox YRC10001x Language English Teachbox YRC1000Controller consisting of:1x Foil TB General AKS-000E YRC10004x Terminal I/O NX/DX/YRC10004x Connection cable FCN 40-pin, 0.8 m, round1x Base cabinet w/ DK H=250 YRC10001x Single Variant B1x F-Pkt YRC1000 Standard setting1x F-Pkt YRC1000 Application General1x -Pkt YRC1000 General Advanced1x Initialisation YRC1000 – General1x Fkt YRC1000 Functional Safety (FSU)1x Software MotoVRC SI Edition1x Mounting kit 2 external axes YRC10002x Servopack CSRA-SDB71HA1x Cable set Crossbox Motor Int. H=2501x Cable set Crossbox Encoder int. H=2501x Crossbox cable Encoder 9m #3 #51x Crossbox cable Motor 9m #3 #5Robot accessories consisting of:1x Media connector ZSB 6VX12/25Positioner consisting of:1x Positioner ZSB, DK-500 (DX)1x E-material EKPO_1Documentation consisting of:1x Documentation Robot DE 1xPrint, 1xUSB1x 1xPaper, 1xCD in German

Condition: ready for operation (used), Year of construction: 2015, operating hours: 61,469 h, controller manufacturer: TRUMPF, controller model: TASC 6000, This TRUBEND Cell 5000 with TruBend 5085 extended version (2720 mm x 850 kN) and BendMaster 60 was manufactured in 2015. World's first bending automation with image recognition for maximum flexibility. Sheet metal parts up to 40 kg, 6-axis backgauge sensor technology. Maximum repeat accuracy thanks to angle sensor technology (ACB) in automated operation. It features a stable all-steel frame, electro-hydraulic top drive, and a modern block hydraulic system. The control unit is a TRUMPF TASC 6000 with a 15-inch touchscreen and network capabilities. Ideal for precise bending operations, consider the opportunity to buy this TRUMPF TruBend Cell 500 press brake. Contact us for more information about this machine. • Machine: TruBend 5085 (2720 mm x 850 kN) with BendMaster 60 • Stable all-steel machine frame • Press beam with spherical bearing and tilt adjustment • Electro-hydraulic top drive with 4-cylinder technology • Generous edge clearance • Flat front covers • Modern block hydraulics • Electronic pressure balance • Measuring system with glass scale and spring compensation • Hydraulic oil in the machine (lifetime lubrication) • Oil cooler • Control cabinet cooling via air-to-air heat exchanger • Modern machine design • Stop/Backgauge • Stop system • Backgauge system: 2 axes (X and R) • Tool clamping • Upper tool holder, manual clamping, hardened • Lower tool holder, hydraulic clamping, hardened • Lower tool shift, 2 positions, pneumatic Dksdpox Imqlofx Ag Tji • Crowning • Manual crowning • Control • TRUMPF TASC 6000 • Graphical workshop programming • Windows XPe (embedded), Pentium 4, 2.8 GHz • 2 GB RAM • 15-inch touchscreen • Network-enabled • Teleservice via modem • Operation • Control panel with LCD keypad and foot switch • Communication rail • Safety • Standard safety devices • BendGuard safety device for upper tools up to 390 mm • CE marking Additional equipment • TRUMPF BendMaster automation (standard features) • Robot/Handling • Stable base and manipulator in die-cast aluminum • Load capacity 60 kg (workpiece plus gripper) • Low-profile welded floor track • Sheet metal sensor for contour detection • Rotary feedthrough for easy gripper change • Gripper coupling on the BendMaster • Sensors for 4-axis backgauge system • Electric drives • Double sheet detection • NC gripper transfer station • Vacuum generation for suction grippers • Control • TRUMPF PC control with operator terminal • Teleservice via modem • Operation via screen, mouse, and keyboard • Safety • Safety fence with access doorWorld's first bending automation with image recognition for maximum flexibility Sheet metal parts up to 40 kg, 6-axis backgauge sensor technologyMaximum repeat accuracy thanks to angle sensor technology (ACB) in automated operationTruBend 5085 (2720 mm x 850 kN) with BendMaster 60

Year of construction: 2021, condition: ready for operation (used), total height: 1,300 mm, product length (max.): 4,500 mm, Pipe Production Line manufactured in 2021. This Bazhou Wanxin machine features a dual-station decoiler, hydraulic shear and butt-welding machine, and a cold saw for precise cutting of pipes. It accommodates round pipes with diameters from Ø16-63.5 mm and offers a feeding speed of up to 120 m/min. Consider the opportunity to buy this Bazhou Wanxin Pipe Production Line. Contact us for further details. • Dual-station decoiler • Function: Passively unwinds the coil • Construction: Dual-station with 180° rotation; manual expansion • Advantage: Fast loading, simple operation • Hydraulic shear and butt-welding machine • Function: Cuts front/rear strip ends, centers, and re-welds • Construction: Manual hydraulic shear with boom; front/rear pressure rollers; front/rear centering rollers; welding device • Cutting method: Hydraulic shear • Pressing method: Double-cylinder press • Welding method: Manual welding • Coil accumulator • Function: Ensures continuous production during strip changeover • Construction: Frame type with movable and fixed frames (incl. feeding device) • Feeding speed: max 120 m/min Dkedpfx Agoyhfvlo Tji • Storage speed: max 200 m/min • Stored strip length: 200–400 m • Pinching roller motor: AC 11 kW • Forming and calibration machine • Working height: +850 mm • Main drive power: AC/DC motor 160 kW, 1000–2000 rpm; reducer: gear-hardened; gearbox: spiral bevel gear • Entry/formation: Passive 5-roll straightener; vertical rolls for strip feeding; forming via 7 horizontal + 8 vertical roll stands • Guiding/pressing/deburring/cooling/calibration: 6 horizontal + 5 vertical roll stands; 1 round calibration stand • Round calibration stand: 1 smoothing device; 2 sides with 8 rolls (4 per side); Ø30 mm rolls, 40Cr, quenched/tempered/hardened • Horizontal roller shaft: Ø60 mm, bearing position 55, material 40Cr; surface hardening HRC 50–55 • Vertical roller shaft: Ø40 mm, material 40Cr, quenched/tempered/hardened • Bearing slider: Forged steel 45# • Stand style: Gantry type; opening width 120 mm; horizontal stand clamping adjustable via worm gear • Stands material: Welded, aging annealed • Pinching roller shaft: Ø50 mm, 2 rollers, manual screw adjustment • Guide shaft: Ø40 mm • Deburring knife: 2 pcs (1 in use, 1 spare) • Cooling tank: Included • Cold saw (Type KK-5-50) • Function: Cuts pipes to preset length at line speed • Pipe diameter: Round Ø16–63.5 mm (and corresponding square/rectangular) • Cutting length: 1–6 m • Material thickness: 0.6–2.5 mm • Saw motor: 11 kW AC with frequency inverter • Feeding motor: 2.9 kW servo (Yaskawa) • Drive motor: 11 kW servo (Yaskawa) • Feeding mode: Servo multi-stage speed • Speed following: max 110 m/min • Clamping: Pneumatic • Saw blade: Ø400 mm • Saw reducer: Model KK-80 • Sawing stroke (rack length): 3 mNote • The technical data and descriptions are transcribed from the original order confirmation and are for informational purposes only; they are not binding. Additional equipment • Conveyor track, table, and packing machine • Function: Automatic pipe transfer from mill to table; packages into hexagonal bundles • Roller track length: 16 m • Drive: 1 motor YCT200-4A, 5.5 kW

Condition: ready for operation (used), Year of construction: 2008, number of axes: 6, This 6-axis PANASONIC TA-1800WG Welding Robot was manufactured in 2008. It includes a 350A welding source, a VWP 316/351/95-3 welding gun, a BRG 2000 mechanical cleaner, an 800mm plinth, and a 750 H-manipulator. If you are looking to get high-quality welding capabilities, consider the PANASONIC TA-1800WG machine we have for sale. Contact us for more information. • 6-axis welding robot Additional equipment Dkjdoyfd N Eopfx Ag Tsi • Welding source: 350A (SP-Mag / Hyper Dippulse) • Welding gun: VWP 316/351/95-3 • Mechanical cleaner: BRG 2000 • Plinth: TA, H=800 mm • H-manipulator: 750