Used Foseco Impeller for sale (286)

Condition: refurbished (used), Year of construction: 2016, HANDTMANN VF-608 plus F,P.A. The machine has been completely renovated using only original parts. 3 months warranty for parts. All seals, bearings and siemering are new. Servomotors, gears and vacuum pump after complete regeneration. Knedpfxopy Edle Aqisb New control panel. Machine with a clip-socket. Accessories: grease, grease gun, impeller wrench, funnel wrench, scraper, set of funnels and technical documentation. The machine is included with the AG-410 linking gearbox. Delivery time: ready to delivery.

Condition: used, Year of construction: 2020, functionality: limited functionality, overall weight: 150 kg, GRUNDFOS Electronically Controlled Dry-Running Pump TPE 100-250/2-S A-F-A-BAQE-ND1 Single-Stage Inline Pump Art. 99114824 PN16. 3 x 380-500 V DN100 with MGE160MH-2-FF300-JA Motor We are offering the Grundfos electronically controlled dry-running pump. ⭐︎ Condition: Good (used) The electronically controlled dry-running pump is used but fully operational. The pump was functioning flawlessly up until removal a few weeks ago. Manufacturer: Grundfos Model: TPE 100-250/2-S A-F-A-BAQE-ND1 Description: Single-stage inline pumps with speed-controlled MGE motor Frequency converter: integrated Pump speed: 2930 rpm Rated flow: 135 m³/h Knsdpfx Asyc T Apjqisb Rated head: 20.1 m Mechanical seal: BAQE Pump housing: Cast iron Impeller: Cast iron Gross weight: 157 kg For further technical details, please refer to the nameplate. Scope of delivery as shown. Inspection prior to purchase is possible and expressly encouraged. 2 units available. Price: per unit #Shelf 21-1-9 Shipping possible, but buyer pays shipping costs. Single-stage volute pump with opposing suction and discharge ports in inline design. Suction and discharge ports have the same diameter. The pumps are constructed according to the top-pull-out principle, i.e., the pump head (motor, headpiece, and impeller) can be easily removed for servicing or maintenance while the pump housing remains in the piping. The pump is equipped with an unbalanced rubber bellows seal. The mechanical seal complies with EN 12756. Piping connection via DIN flanges PN 16 according to EN 1092-2 and ISO 7005-2. The pump features a fan-cooled permanent magnet synchronous motor. The motor efficiency corresponds to energy efficiency class IE5 according to IEC 60034-30-2. For speed control, the motor is equipped with a frequency converter and PI controller, both integrated into the motor terminal box. Electronic speed control enables continuous adaptation of motor speed and thus pump output to current demand. The pump is equipped with a differential pressure sensor.

Year of construction: 1991, condition: like new (used), overall weight: 1,420 kg, rotational speed (max.): 1,485 rpm, 3 stainless steel volute casing pumps in process design 2 x CPK-CM 250-315 built in 1991 1 x CPKN-C1 250-315 year of construction 2011 !!! Price per piece !!! Pumps were operated on a test bench and all have very few operating hours! See pictures !!! Flow rate: 1001 m³/h (278 liters / second) Delivery head / delivery pressure: 18 m / 1.8 bar Pump speed: 1485 1/min NPSH: 5.00 m Shaft seal: single mechanical seal with sealing water Manufacturer: Burgmann Impeller type: closed centrifugal impeller Impeller diameter: 324mm Bearing type: roller bearing Lubrication type: Oil Kedpfx Aqoqabiaeisnb Lubricant monitoring Oil level controller Materials: 1.4408 (AISI 316) Pump housing: 1.4408 (AISI 316) Wear plate: 1.4408 (AISI 316) Pressure cover: 1.4408 (AISI 316) Shaft: Heat-treated steel C45+N Impeller: 1.4408 (AISI 316) Bearing bracket lantern: Gray cast iron JL1040 Shaft sleeve: CrNiMo steel Nominal diameter of suction nozzle: DN 300 Discharge connection Nominal diameter: DN 250 Nominal pressure suction side: PN 16 Nominal pressure pressure side: PN 16 Coupling manufacturer: Flender Coupling type: Eupex NH without intermediate sleeve Base plate: Painted gray cast iron Motor manufacturer: VEM K21R 280S4-Z Efficiency class: IE 0 Motor speed: 1480 1/min Frequency: 50 Hz Rated voltage: 400 / 690 V Rated motor power: P2: 75 kW Thermal class: F Motor protection class: IP55 Cosphi: 0.86 Dimensions: Length: 2120 mm Width: 950 mm Height: 1090 mm Weight: 1420 kg

Condition: good (used), Year of construction: 2007, functionality: fully functional, A state-of-the-art, manufacturer-independent Fastems MLS-MD (Multi-Level System) pallet system with 1,064 storage locations is for sale. For sale is a high-capacity, extremely flexible automation solution from the world market leader, Fastems. The system underwent a comprehensive modernization between 2023 and 2024 (total volume of the Fastems project exceeding €900,000). During this process, the entire system was upgraded to the latest MMS 8 control software, and the hardware (including a new copper busbar and main impellers) was completely mechanically renewed. The system is manufacturer-independent and can be adapted to machine tools from almost all major manufacturers (e.g., DMG MORI, GROB, Mazak, Matsuura, Heller, etc.). The sale is for the automation system / pallet system only (WITHOUT the connected Heller machining centers). To make the purchase and integration into your production as risk-free and convenient as possible, we offer the following additional services upon request: • Turnkey complete package: We offer professional dismantling, insured transport, and complete reassembly, mechanical/electrical installation, and commissioning in your production hall. You will receive a fully functional system from a single source. • Attractive financing options: With appropriate creditworthiness and a positive assessment, we offer flexible financing or leasing models for the system. Preserve your liquidity and finance the automation directly from your current earnings. (Germany only) Technical data & system configuration: • System type: Fastems MLS-MD (Multi-Level System - Medium Duty) • System number: 2528 • Year of construction: 2007 / Complete general retrofit & control system upgrade (MMS 8) in 2023/2024! • Control / Software: Fastems MMS 8 (Latest version, modernized in 2023/2024) • Total storage capacity: 1,064 storage locations for Euro pallets and grid boxes • Pallet and load specifications: Knjdozvbl Rspfx Aqieb o Machine pallets (MC): For pallet size 630 x 630 mm (Max. load weight: 1,500 kg including pallet) o Material pallets (EUR): For pallet size 800 x 1,200 mm (Max. load weight: 1,200 kg) o Grid boxes (GB): For pallet size 835 x 1,240 mm (Max. load weight: 1,200 kg)

Condition: used, Year of construction: 2022, _____Pump Tank Trailer KTR 18.5 Tandem, Professional Equipment: Year of Manufacture: 2022 Approx. 32,000 m³ capacity 24 tons permissible total weight Fenders Lower hitch, 4-ton support load K80 Drawbar, hydraulically height-adjustable All suction lines, except for slide valves and quick couplings, are 8" Vogelsang 6000 l rotary lobe pump with injection system, Changeable impellers and reduction gearbox Suction on the left side, 6" with quick coupling and stone trap All slide valves as pneumatic slide valves / stainless steel blade (clog-free) Automatic filling shut-off Preparation for cutter and suction arm Preparation for trailing shoe Hose rack for suction hoses Single-sided wide-angle universal joint with overload protection Tires 750/60 R 30.5 TÜV approval, 40 km/h 2 LED work lights LED lighting system Preparation for lifting device Special equipment: (1124-B) Kumm-Profi-Pad 7" touchscreen operation Application rate display Individual button assignment for the respective hydraulic functions, such as lowering/raising boom, adjusting boom, connecting arm, pre-set program for Bomech trailing shoe One press of a button and the stored function runs in sequence! (1124-C) Application rate regulation Automatic application rate regulation depending on driving speed, controlled via Kumm-Pad (1124-D) Vogelsang rotary lobe pump 6,000 liters with injection system and changeable impellers Knodpjz Dmaasfx Aqijb (1124-E) Tires 750/60 R 30.5, standard (1124-F) Two-chamber system, standard Two-chamber system as standard. Emptying: First at the rear, then at the front. (1124-G) Air suspension with lifting/lowering valve, standard (1124-H) BPW trailing steering axle, hydraulically lockable (1124-I) Fenders, standard Extremely large wheel cut-outs for a very low center of gravity and the greatest possible steering angle (1124-J) Lower hitch K 80, 4.00 tons support load, standard (1124-K) Hydraulic support leg, standard (1124-L) Drawbar, hydraulically height-adjustable and sprung, standard (1124-M) All suction lines, except for slide valves and quick couplings, are 8", standard (1124-N) Suction nozzle at the front left with pn. plate slide valve and 6" quick-release coupling (1124-O) Automatic filling shut-off (1124-P) Preparation for cutter and suction arm (1124-R) Preparation for tire pressure control system Preparation for the installation of a tire pressure control system, standard! BPW axles pre-drilled! (1124-Q) Preparation for trailing shoe and trailing hose booms (1124-S) Preparation for suction boom above Preparation for the installation of a suction boom above the vehicle, standard. Connection for front pump station, standard (1124-T) Walterscheid universal joint Walterscheid universal joint, single-sided wide-angle (1124-U) Blow-out function Possibility of emptying the entire boom system by means of compressed air (1124-V) LED lighting Rear lights completely LED. Turn signals with dynamic indicator (similar to "Audi" turn signals) (1124-W) Preparation for lifting device Possibility of installing a lifting device with 3/4-point mounting (1124-ZA) Forced steering, electric Forced steering, electro-hydraulic, suitable for KTR tandem vehicles (1124-ZB) Axle load relief Axle load relief at the touch of a button (to increase the support load, the front axle is relieved) (1125-J) Cutter for KTR Cutter Vogelsang Rotacut 10,000 Suction arm KTR, single-jointed Suction arm 8", single-jointed with slide valve, ventilation, Pressure limitation, incl. operation from

Condition: used, Art. No.: Pum 32 Manufacturer: KSB Type: ETANORM MX 80-250 MX 1 Item condition: good, used, functional guarantee Pump originates from a fire extinguishing system Available: immediately Flow rate: 2,800 l/min Head: 60.5 m Revolutions: 2,960 rpm Pump impeller: bronze Motor Manufacturer: Siemens/KSB Power: 45 kW Voltage: 3 x 400 Volts Revolutions: 2,960 Knodpfx Aqezxgvtsieb

Year of construction: 2024, condition: excellent (used), functionality: fully functional, Hidrostal C03R-RMN3R | Submersible Pump Manufacturer: Hidrostal Model: C03R-RMN3R+CEZY4-GSEQ1AF+NZ1Z10A-10 Year of manufacture: 2024 Rated power (P2): 1.50 kW Rotation speed: 1375 rpm Power supply: 400 V / 4.7 A (50 Hz) Protection class: IP68 (fully watertight under immersion) Insulation class: F Device weight: 92 kg Maximum ambient temperature: 40°C Serial number (M.NR.): 311952 Equipment Features: Transport handle: Made of acid-resistant stainless steel 1.4404 (V4A). Handle load capacity (WLL): 150 kg. Professional submersible pump by the Swiss brand Hidrostal, designed for operation in the most demanding conditions. Thanks to its IP68 protection rating, the unit is suitable for continuous immersion in medium. Pumps from this manufacturer are distinguished by a unique screw-centrifugal impeller, which efficiently handles the pumping of sewage, sludge, as well as liquids with a high content of solids and fibrous materials without the risk of clogging. Its robust construction, weighing 92 kg, and the use of high-quality stainless steel for load-bearing components ensure longevity and safe operation even in aggressive chemical environments. Knodpfxoy I Dtde Aqisb

Condition: used, driver cabin: other, gearing type: other, Year of construction: 2022, Additional features: * LED boundary lights Kedpfx Aqszduw Asisnb * Hydraulic tilting to the right/left * HDK sweeping machine – front mounting * Municipal narrow-gauge vehicles * Paint finish: RAL 2011 * Additional cost for sweeping rollers, consisting of disc brushes with plastic-coated wire * Set of flags * Dirt collection tray with hydraulic emptying and front impeller * Water spray system in front of the brush and, if applicable, on the side brush, including an electrically driven water pump, 12 volts / 24 volts (please specify) Other: * Trade-in and purchase of vehicles and machines possible. * Sale price excluding transport and delivery. * No liability for printing and typographical errors. * Errors, changes, and prior sale are subject to change. * Offer subject to change. * Photos may vary. Price applies to the existing condition. * All information without guarantee.

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM500 sawdust extraction system with dust filters is a high-performance unit designed for the effective removal of chips, sawdust and fine dust generated during woodworking operations. Thanks to the use of a third filtration stage – dust filters with an efficiency of up to 2 microns – the unit significantly improves air cleanliness in the workplace. This model meets the highest requirements of professional users while offering high suction power, structural stability and reliable performance during continuous operation. Main Advantages Very high extraction capacity – 5,000 m³/h, ideal for connecting multiple machines simultaneously Advanced dust filtration system (third stage) – captures particles as small as 2 microns Balanced metal impeller – quiet, vibration-free operation 2.8 kW three-phase motor – ensures consistent negative pressure and extraction performance Ability to connect up to 4 machines simultaneously – optimizes production processes Air suction speed of up to 31 m/s – effective dust removal without allowing dust to settle around the workstation Large waste bag capacity – 480 l – longer operating cycles without the need for emptying Mobile steel base – easy movement of the extraction unit around the production hall Construction and Technology The CORMAK FM500 has been designed for demanding industrial conditions. The extraction system is equipped with a metal impeller operating at 2,950 rpm, ensuring high negative pressure and consistent suction power. The unit is built on a robust steel frame with supports for the waste bags, providing stability and resistance to deformation. Thanks to four extraction outlets (1 × 200 mm / 4 × 100 mm), the unit can operate with multiple woodworking machines simultaneously. Knsdez A Tl Tjpfx Aqieb Precision and Operating Efficiency The FM500 woodworking extraction system stands out with its high suction power and advanced dust filtration system. As a result, it minimizes dust levels in the production hall, extends machine service life and improves air quality. The high extraction capacity of 5,000 m³/h and negative pressure of up to 2,500 Pa ensure effective performance even during prolonged operation with three or four machines. Applications The FM500 is an ideal solution for: woodworking and furniture manufacturing facilities, workshops equipped with planers, saws, sanders, milling machines and thickness planers, production lines requiring simultaneous dust extraction from multiple workstations, environments where limiting the spread of dust and fine airborne particles is critical. Standard Equipment mobile wheeled base, dust filters – third filtration stage (down to 2 microns), 480-litre waste bags, 4-outlet extraction manifold (1 × 200 mm, 4 × 100 mm). Optional Equipment 100 mm extraction hoses, galvanized hose clamps, Technical Data Motor power 2.8 kW Power supply 400 V / 50 Hz Motor speed 2,950 rpm Extraction capacity 5,000 m³/h Negative pressure up to 2,500 Pa Air suction speed up to 31 m/s Waste bag capacity 480 l Outlet diameter 200 mm / 4 × 100 mm Dimensions (L × W × H) 1,525 × 560 × 2,460 mm Weight 64 kg

Condition: excellent (used), functionality: fully functional, power: 110.32 kW (149.99 HP), first registration: 11/2021, fuel type: diesel, fuel: diesel, driver cabin: day cab, operating hours: 172 h, Equipment: air conditioning, all wheel drive, car registration, 1352T BOKI MUNICIPAL VEHICLE 1352T Length x Width x Height – 5,070 x 1,700 x 2,190 mm (excl. mirrors) Wheelbase 2,400 mm / 990 mm Tank volume: Diesel 50 liters, AdBlue 25 liters, hydraulic oil 50 liters Additional equipment affects unladen weight, payload, and dimensions Engine FPT F1C 1152, EU 6C, 110kW (standard) FPT, type F1C, 2,998 cm³, 4-cylinder diesel engine 110 kW / 150 HP at 3,000 rpm. Torque: 370 Nm at 1,320 rpm. Emission standard Euro 6C (Stage V in vehicle documents) Steering (standard) Hydraulically steered front axle with up to 40° steering angle Left-hand drive Third axle forced steering and can be lifted Hydraulic Load-Sensing 2-circuit system Load-Sensing variable displacement pump with 2 hydraulic circuits (LUDV) Independently switchable electrically Proportional adjustment Nominal flow rate: max. 80 l/min per circuit Total flow rate: 135 l/min at 3000 1/min, max. 200 or 300 bar, manually switchable Two pressure and tank lines at the front and rear, including return flow filter With drip-free flat-face quick couplings Including leak oil line at the front and rear With separate filtration Including 2 oil flow regulators Floating position for double-acting control valve Floating position for 1 double-acting control valve at the front Double-acting control valve at the front 1 double-acting valve with 2 drip-free flat-face quick couplings at the front Operation via buttons on the joystick Air conditioning Air conditioning integrated into the vehicle's heating and ventilation system Vehicle height remains unchanged Control panel holder Control panel holder for spreader control unit Exterior mirrors adjustable and heated Electrically adjustable and heated exterior mirrors Accelerated lifting and lowering, fixed mounting plate Accelerates the lifting and lowering of attachments with their own hydraulic system Used with attachments with a high flow rate at the control function. Only in combination with: FPT engine, LS hydraulics, fixed mounting plate DIN 76060-B Rear connections offset for roll-off systems Hydraulic connections on the bulkhead placed to the outside, to allow collision-free mounting of roll-off systems Preparation for tipper cylinder Preparation of the vehicle for the later installation of a tipper cylinder, Electrical connections prepared, hydraulic connection prepared With the following additional equipment: Central lubrication system vehicle Consisting of the required lubricant distributors, Connection fittings at the lubrication points and the Kodpfx Aqjzf Eh Usionb Distributors, as well as the lubricant lines: Front axle 10 lubrication points Rear axle 14 lubrication points Total 24 lubrication points ILC MINI MAX 12V 1.0 kg R, CT, PE Stirring impeller Control with: Operating pressure: 200 bar Speed: 22 rpm Container: 1.0 kg Grease follower lid: No Stirring impeller: Yes Low level indicator: No Outlet/number: G1/4" / 2; M10x1.8" Pump element with: Cable: Yes Clamping: Bayonet 7-pin Voltage: 12 V Connection: M12x1 IP67 Without attachments. Suitable attachments can be purchased separately: Vario snowplow HUMMEL LF-D 2700 - €7,500.00 net Roll-off tipper AR-L55-2 new - €17,500.00 net Spreader or wet salt spreader available at an additional price. Subject to changes, printing errors, mistakes, and prior sale. All information is provided without warranty. The sale takes place with the exclusion of any guarantee or warranty.

Year of construction: 1999, condition: reconditioned (used), Rotary tablet press EU1"-441 – 29 stations + EU-B – 43 stations This high-performance tablet press is designed for the production of tablets with a maximum diameter of 25 mm using the EU-441 rotor and a maximum diameter of 13 mm using the EU-B rotor. The tablet press is suitable for producing shaped tablets (guided tooling). Technical specifications Max. pressing force: 100.0 kN Pre-compression: 100.0 kN Max. tablet diameter: 13.0–25 mm Max. filling depth: 18.0 mm (with corresponding filling curve) Max. tablet thickness: 8.5 mm Die speed: 15–120 rpm Performance EU-441: 26,100 to 174,000 tablets/h EU-B: 38,700 to 309,600 tablets/h The machine is equipped with four frameless, double-walled plastic doors. This makes the die table easily accessible for cleaning and tool changes. The main drive, gearbox, and a central lubrication system are located in the machine cabinet. At the rear of the machine is a connection for an external exhaust and filter system, which keeps the pressing chamber largely dust-free. Product feed The product is fed in via a stainless steel hopper and directed into the Fill-O-Matic mixing impeller shoe. From there, the dies are filled. The mixing impeller shoe can be easily removed for cleaning. The finished tablets are discharged via a discharge chute and collected. Rejected tablets are automatically separated via a sorting diverter. Monitoring system The machine features a monitoring system with: Tablet jam monitoring Level control Filling hopper monitoring Measurement of the resistance of the punches Ejection force measurement Individual rejection The system enables: Statistical evaluation Knodezl Tigjpfx Aqijb Documentation via printer Permanent press force monitoring Automatic adjustment of the press force Automatic rejection of defective tablets Quick stop in case of exceeding limit values. Electrical equipment The electrical installation is located in a separate control cabinet, which can be positioned independently of the machine. The following additional devices can be connected: Vertical dust collector Metal detector. Scope of delivery Machine without tableting tooling Filling curves for: EU-441 (10 mm and 12 mm) EU-B (8 mm) The changeover rotor is located on a Fette rotor trolley, which is included in the scope of delivery. If required, a control system upgrade can be offered. Machine and operating manual as well as validation documents are available in German. Condition Approx. 34,000 operating hours Regularly maintained Very good mechanical and visual condition.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Fan RW No. 2 Volume m³/h: 7,120 Drive kW: 7.5 / V400 / Hz50 Pressure Pa: 1,977 Inlet diameter: 295 mm Outlet diameter: 300 mm Open impeller Kedpswu A H Njfx Aqionb New V-belts New bearings

Year of construction: 2000, condition: used, Landini Water Pump • Model CU5/A • Output 84 m³ • Power 50 HP • Max. pressure 10.4 bar • Not self-priming • Three-point hitch Kedox S Sgmjpfx Aqisnb • Suction hose • PTO-driven pump with single impeller for high pressure. Specially suited for small irrigation reels. • Comes with hoses and sprinklers Condition: Used Year of manufacture: 2000

Condition: excellent (used), tank capacity: 340 l, total length: 2,450 mm, total width: 1,350 mm, total height: 1,950 mm, inner diameter: 800 mm, operating temperature: 140 °C, negative pressure: -1 Pa, Vacuum reactor model BACHMIX with a total capacity of 340 liters, manufactured by BACHILLER. Kodpfxexn Ngto Aqienb Mounted on a stainless steel frame. Hydraulic system for lid lifting. Equipped with three agitation systems: Anchor-type agitator with PTFE scrapers + two axial turbine dual-blade impellers at different heights Cowless agitator Turrax agitator

Year of construction: 2018, condition: good (used), coolant capacity 10 m3l/h Headroom 20 m operating pressure 2 bar voltage 230/400 V - 50 Hz motor speed 2900 U/min motor type 90 L Kodpfeub Utdex Aqisnb engine output 2,2 kW weight 35 kg Standard suction centrifugal pump, Stainless steel housing and impeller, Flange connections, Serial No.: 22/04-140200

Condition: used, Year of construction: 2014, Manufacturer : Alliance Inox Industrie Type: Vertical cylindrical stirred tank Year : 2014 Useful capacity: 3,000 litres Material : 304 L stainless steel Operating temperature: 20 to 60°C Agitation: 2 three-bladed impellers, 100 rpm Engine power: 10 kW ATEX class: Ex zone II T3 ext   Jacketed : 837 L Pressure: 1.5 bar Heating: 2 x 4.5 kW immersion heaters PT100 temperature sensor: inside the tank Knjdpeyvv A Tsfx Aqisb Sonde de température PT100 : Jacket   Empty weight : 2000 kg Dimension : Ø 1563 x 4831 mm Central drain DN63   Motor checked and tested prior to sale. Drawing available on request

Condition: good (used), functionality: fully functional, rotational speed (min.): 2,840 rpm, volume flow: 3,240 m³/h, pressing: 10,000 Pa, power: 18 kW (24.47 HP), High pressure centrifugal fan, dust extraction fan, pressure fan, vacuum fan, centrifugal fan, high pressure fan Spellna VRU 15-125-30H3 Condition: used impeller: forward curved steel, direct drive. 700mm Drive motor:18 kW Kodpfx Aeticdlsqisnb p1:1,2kg/m3 pressure:9500-12000Pa Number of revolutions:2950rpm air transport:3240m3/h Volume output:0.9m³/s Print pt:100 mbar Connection input:Ø 300 mm Connection output:Ø 200mm Dimensions: 1400x1400x960mm Mass: 350

Condition: used, mileage: 799,039 km, power: 294 kW (399.73 HP), first registration: 02/2010, fuel type: diesel, empty load weight: 12,055 kg, axle configuration: 3 axles, brakes: retarder, color: other, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: steel-air, Equipment: air conditioning, , Manufacturer: Scania - Type/Model: P 400 LB6X2 - First registered: 16.02.2010 - Mileage: 799,039 km - Number of axles: 3 - Emissions class: Euro5 - Gearbox: Manual transmission - Suspension: Leaf-air - Lift axle - Brake: Disc - Length: 8600 mm - Width: 2500 mm - Height: 3380 mm - Empty weight: 12055 kg - Body manufacturer: Schwarte - Tank material: Stainless steel - Total tank volume: 15000 L - Tank chambers: 1 - Baffles - Insulated - System designation: Impeller system - Impeller pump - MAK 3002 - CIP cleaning Kodov Awc Nspfx Aqienb

Year of construction: 1991, condition: excellent (used), functionality: fully functional, overall weight: 520 kg, Pump was operated on a test bench and has only run for very few operating hours. Flow rate: 400 m³/h ( 111 liters / second ) Delivery head / delivery pressure: 19 meters / 1.9 bar Pump speed: 1450 1/min NPSH required: 3.83 m Efficiency: 85.7% Shaft power: 24.04 kW Impeller diameter: reduced 264.5 mm (maximum Ø 269 mm) Shaft seal: single mechanical seal Manufacturer: Burgmann Impeller type: closed radial impeller Bearing type: roller bearing Lubrication type: Grease Materials of construction Pump casing: 1.4408 (AISI 316) Wear plate: 1.4408 (AISI 316) Pressure cover: 1.4408 (AISI 316) Shaft: 1.4462 Impeller: 1.4408 (AISI 316) Bearing bracket: Cast iron EN-GJL-250 Shaft sleeve: CrNiMo steel Nominal size of suction nozzle: DN 200 Discharge connection Nominal diameter: DN 150 Nominal pressure suction PN 16 Nominal pressure pressure PN 16 Coupling manufacturer: Flender Coupling type: Eupex NH with intermediate sleeve Base plate: Painted gray cast iron Knjdpfx Aqerfdtteijb Motor manufacturer: VEM Type: KPER 200 L4 Efficiency class: IE 0 Motor speed: 1435 1/min Frequency: 50 Hz Rated voltage: 380 / 660 V Rated motor power: P2: 30 kW Thermal class: F Motor protection class: IP54 Cosphi: 0.82 Dimensions: Length: 1600 mm Width: 650 mm Height: 820 mm Weight: 520 kg

Condition: like new (used), Year of construction: 2008, volume flow: 3,700 m³/h, power: 2.1 kW (2.86 HP), input frequency: 50 Hz, Systemair KTEX 60-35-4 Atex fan 2.1kw 3700m3 duct mount KTEX fans feature a compact, streamlined design, high-performance forward-curved radial impeller and reliable ATEX-rated AC motors. power 2.1 Kw Voltage 230/ 400V 50Hz 5.8/3.8A IP44 power 2.1 KW Air flow max 3.704 m³/h Pressure: 580 Pa Impeller rotation: 1.392 rpm Air flow max 3.704 m³/h Minimum static back pressure 225 Pa Conveyed air temperature max 40 °C Maximum temperature of the conveyed air when speed is controlled 40 °C Insulation class F Explosion-proof designation II 2 G Ex eb h IIB+H₂ T3 Gb Certificate Presafe 17ATEX9970X Ambient and pipe temperature -20 to 40 °C Dimensions and weights inlet (height x width) 350 x 600 mm outlet (height x width) 350 x 600 mm Kjdpsvu Hrkefx Aqisnb Weight 42 kg

Condition: used, functionality: fully functional, Agilent 6210 G3258A, G1969A Time of Flight Liquid Chromatograph Mass Spectrometer LC/MSD TOF. The Agilent TOF is an orthogonal-axis time-of-flight mass spectrometer (oa-TOF). That is, the ions reaching the time-of-flight chamber are impelled in a direction perpendicular to their original path. You can set up an Agilent time-of-flight mass spectrometer system (TOF) in several configurations: -For normal flow LC/MS with a binary pump, quaternary pump, well-plate sampler (or autosampler) and ESI , APCI, APPI or MMI ion sources -For microflow LC/MS with a capillary pump, micro well-plate sampler and ESI, APCI or MMI ion source -For nanoflow LC/MS with a nanopump, micro well-plate sampler and nanospray source or dual nanospray source -TOF system with an AP-MALDI source Each system has advantages for drug discovery — high throughput sample screening with highly sensitive detection and accurate mass assignment. Features: Kedet Ui N Uopfx Aqisnb ESI – Electrospray Ionization APCI – Atmospheric Pressure Chemical Ionization APPI – Atmospheric Pressure Photo Ionization MALDI – Matrix-Assisted Laser Desorption Ionization MMI – Multimode Ionization Good working condition. Please check out our other listings as well.

Condition: like new (used), Year of construction: 2024, For sale is a used Felder RL-300 clean air extraction unit with a maximum air flow rate of 6,000 m³/h. The extraction unit is in very good condition and has been inspected and refurbished by our qualified staff. Technical Data: Knjdpfxjxdlwmj Aqijb - Extraction capacity: 6,000 m³/h - Maximum negative pressure: 2,450 Pa - Extraction connection diameter: 300 mm - Chip collection volume: 2 x 210 liters - Dimensions: 3,015 x 970 x 2,280 mm (L x W x H) - Automatic fire extinguishing system with powder extinguisher - Steel impeller - Motor power: 8.2 kW - Year of manufacture: 2024 The clean air extraction unit is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Related terms: extraction, extraction unit, clean air extraction unit, clean air, RL Reference: R-S1522

Condition: used, Year of construction: 2021, Grundfos Dry-Running Pump, electronically controlled TPE3 40-80 S-A-F-A-BQQE-CDB Art. 99272194 Ksdpeyf Hf Njfx Aqijnb Single-stage in-line pumps with speed-controlled MGE motor PN16. 3 x 380-500 V DN100 with MGE90SC 2-56C-IA-150 motor P.C.: 2114 We are offering the Grundfos electronically controlled dry-running pump. ⭐︎ Condition: Good (used) The electronically controlled dry-running pump is used but operational. The pump was functioning perfectly up until removal a few weeks ago. Manufacturer: Grundfos Type: TPE3 40-80 S-A-F-A-BQQE-CDB Description: Single-stage in-line pumps with speed-controlled MGE motor Frequency converter: integrated Pump speed: 2970 rpm Rated flow: 12.3 m³/h Rated head: 5.4 m Mechanical seal: BQQE Pump casing: cast iron Impeller: cast iron Gross weight: 41 kg For further technical details, please refer to the nameplate. Scope of delivery as pictured Inspection prior to purchase is possible and expressly encouraged. #Shelf 11-1-9 Shipping possible, but the buyer bears shipping costs. Worldwide shipping available.

Condition: used, functionality: fully functional, machine/vehicle number: 30044, mileage: 41,900 km, power: 170 kW (231.14 HP), first registration: 11/2020, overall weight: 15,000 kg, fuel type: diesel, color: orange, axle configuration: 4x2, fuel: diesel, wheelbase: 3,560 mm, driver cabin: day cab, gearing type: mechanical, emission class: euro6d, suspension: steel-air, loading space volume: 7 m³, Equipment: ABS, air conditioning, airbag, central locking, cruise control, differential lock, electronic stability program (ESP), immobilizer system, traction control, truck registration, The mileage of the offered vehicles may vary, as some vehicles are currently in rental use! Knodpfx Aqezi U Ryeieb Further comparable vehicles are available upon request. Right-hand drive, 4-cylinder engine OM 934, ABS, ASR, ESP, disc brakes, engine brake, reinforced frame, front axle 5.3 t, rear axle 11 t air-suspended with differential lock, lane keeping assist, active brake assist, hill start assist, underrun protection, reversing warning, daytime running lights, rain sensor, light sensor, plastic toolbox, cab with 2 seats, driver comfort seat, fixed passenger seat, roof hatch, air conditioning, pollen filter, electric windows, electrically adjustable and heated mirrors, radio-CD with Bluetooth, speed limiter, central locking with remote control, immobilizer with transponder, OBU preparation, cruise control, digital tachograph, sun visor, reversing camera. Hydrostatic drive, sweeping speed 0-14 km/h, turbine with stepless adjustment, container made entirely of stainless steel, additional manual pump for lifting the tank, weight indicator, operating hour counter, sweeping hour counter, and water indicator (remaining volume 300 l). Automatic shut-off of water supply when lifting the sweeping unit and also when engaging reverse gear, acoustic signal in the cab when the tank is raised, 2 LED rotating beacons + 2 LED work lights, sound insulation in the unit compartment, right/left sweeping unit, collecting on both sides, dual sweeping system (can sweep on both sides simultaneously), sweeping working width: 2300 mm / with dual sweeping system: 3940 mm, push-type disc brushes with steel bristles, diameter 700 mm, disc brush inclination adjustable (joystick on the right and left), roller brush made of mixed polypropylene and steel wire bristles, L=1500 mm, diameter 400 mm, spray nozzles for disc brush, continuous spray bar at the front with 6 spray nozzles, 3 spray nozzles on each disc brush, 6 spray nozzles in the suction nozzle, 5 spray nozzles on the sweeping roller, water system for cleaning the upper suction shaft with external water connection, leaf grid made of stainless steel, area approx. 2 m², lifting and lowering pneumatically with vibration mechanism, turbine impeller made of Hardox 700, 8 mm thick, casing vault made of Hardox 500, 5 mm thick, water nozzles for internal cleaning of the turbine, water tank 2000 liters made of stainless steel AISI 316 integrated into the superstructure, filling via hose with backflow protection, water pump Wilden, P1, diaphragm pump, dry-running protection, leaf suction system at the rear, reversing camera with monitor in the cab, PM 10, holder for broom and shovel, cable remote control.

Year of construction: 2008, condition: excellent (used), Applications : - Water supply, irrigation. - Heating, ventilation and air conditioning. - Pressure groups, cooling. - Water treatment. Advantages: - Easy to install and maintain. - Compact solution for residential and small collective use. Ksdpfx Ajmih Aaeqionb - Guaranteed water supply in case of failure of an electric pump. - Assembly, adjustment and testing of the unit carried out directly at the factory. - Flexible operation due to variable speed. Features : - Maximum flow rate: 320 m³/h. - Delivery height: 160 m. - Power range: 2x0.25 kW. - Operating pressure: 10/16 bar. - Ambient temperature: 0°C - +40°C. - Liquid temperature : -10°C - +60°C. - Hydrovar®HVL variable speed drive. Motor : - Power supply: 1 x 230V. - Insulation class: F (155°C). - Protection: IP55. Materials : Pump body and impellers: Stainless steel 304. Collectors: AISI 304 stainless steel. Non-return valves: Brass. Certified for use in drinking water production.