Used Foseco Impeller for sale (283)

Condition: used, Year of construction: 2007, functionality: fully functional, overall weight: 221 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 54 A, Device No. 1: KSB Blockp Etabloc 65-200/3002 GN10 IEC standard motor KSB 30 kW 2900 rpm Part No.: 48875108 Single-stage volute casing pump with rated capacities according to EN 733, fitted with KSB IEC three-phase motor, protection class IP 55, insulation class F, assembled as a block unit. Pump shaft rigidly coupled to motor shaft. Equipped with uncooled mechanical seal, corrosion-resistant shaft sleeve, replaceable wear rings. Drive lantern made of cast iron, with contact protection in accordance with EN 294. Mounting by support foot up to motor size 112, by motor foot from motor size 132 upwards. Volute casing: Cast iron Djdpoxbhtlefx Aggecl Impeller: Cast iron Shaft, pump: Tempered steel

Condition: used, Year of construction: 2007, functionality: fully functional, overall weight: 221 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 54 A, Device No. 2: KSB Blockp Etabloc 65-200/3002 GN10 IEC standard motor KSB 30 kW 2900 rpm Part no.: 48875108 Single-stage volute casing pump with nominal ratings according to EN 733, equipped with a KSB IEC three-phase motor, protection class IP 55, insulation class F, flange-mounted to form a monobloc unit. Pump shaft is rigidly connected to the motor shaft. Fitted with an uncooled mechanical seal, corrosion-resistant shaft sleeve, and replaceable wear rings. Drive lantern made of grey cast iron, with contact protection according to EN 294. Mounting via support foot up to motor size 112, and via motor foot from motor size 132 onwards. Volute casing: Grey cast iron Djdpfxexbhtro Aggocl Impeller: Grey cast iron Shaft, pump: Tempered steel

Condition: used, mileage: 1,006,357 km, power: 309 kW (420.12 HP), first registration: 12/2019, fuel type: diesel, axle configuration: 3 axles, brakes: retarder, color: other, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: air, Equipment: ABS, cruise control, differential lock, onboard computer, trailer coupling, Manufacturer: Iveco - Type/Model: Stralis 420 6x2 - First registration: 23.12.2019 - Mileage: 1,006,357 km - Number of axles: 3 - Emission class: Euro6 - Transmission: Automatic - Suspension: Air - Lift axle - Steering axle - Brake: Disc - Body manufacturer: Milcom - Tank material: Stainless steel - Total tank capacity: 16,000 L - Tank compartments: 3 - Insulated - System designation: Schwarte impeller system - Impeller pump - MAK 3002 - Sampler probe - CIP cleaning Dcedpfx Agsxtuh Tjgjl

Condition: new, Year of construction: 2025, SCV8900TC VIBER BIG-BAG is a modern industrial dust extractor designed for intensive use in woodworking and manufacturing facilities. Thanks to the BIG-BAG system and the automatic VIBER filter cleaning system, the unit ensures continuous operation with minimal maintenance while offering a very large waste capacity. It is a unique solution on the Polish market. Key Advantages BIG-BAG – high-capacity container significantly extending the time between emptying cycles VIBER system – automatic filter shaking system ensuring long-lasting filtration efficiency TC housing – effective acoustic insulation and vibration dampening REHEAT – heat recovery from extracted air, improving the facility’s energy efficiency DAMAGE PROTECT – mechanical impeller protection against hard object intake Exceptional suction system tightness – maximum efficiency and no heat loss during winter Construction and Technology The unit is equipped with a metal, dynamically balanced impeller that guarantees quiet and stable operation while maintaining maximum airflow performance. The chip extraction fan is powered by a reliable 7.5 kW motor. The impeller blade design has been aerodynamically optimized to reduce energy consumption. Precision and Performance With a capacity of 8,900 m³/h and filtration of particles down to 5 microns, the system ensures perfect working conditions even in the most demanding woodworking and industrial applications. The SCV8900TC VIBER BIG-BAG chip extractor allows seamless connection to multiple machines simultaneously, supporting continuous operation. Application The machine is dedicated to professional woodworking shops, carpentry workshops, furniture manufacturers, and large industrial production lines where maintaining clean air is crucial. The central dust extraction system performs perfectly in cooperation with machines such as panel saws, edge banders, sanders, and CNC machining centers. Standard Equipment Polyester filters with 5-micron efficiency Automatic filter cleaning system (VIBER) Built-in REHEAT system BIG-BAG waste collection unit DAMAGE PROTECT system Control cabinet Optional Equipment HEPA filter for finer dust fractions Bin fill level monitoring Differential pressure sensors Remote control system Technical Specifications Power supply voltage: 400 V Motor power: 7.5 kW Motor speed: 3000 rpm Dodpfsup Df Tjx Aggecl Filter type: Polyester, 5 microns / filter category “G” Filter dimensions: Ø160 × 960 mm Number of filters: 45 pcs Filtration area: 23 m² Inlet diameter: 350 mm Capacity: 8,900 m³/h Vacuum pressure: 3000 Pa Air velocity: 32 m/s Noise level: 80 dB Number of BigBags: 1 pc BigBag capacity: 1250 L Dimensions: 2400 × 1100 × 3600 mm Weight: 540 kg

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM350 Dust Collector is an industrial dust extraction system designed for efficient and reliable removal of sawdust and wood chips in professional woodworking facilities. Thanks to its powerful suction performance, large-capacity collection bags, and the ability to connect up to four machines simultaneously, the FM350 provides effective dust control even in demanding production environments. Key Features Powerful 3.8 kW motor (400 V) – ensures reliable, continuous industrial operation. Airflow capacity of 4,860 m³/h – efficiently extracts large quantities of sawdust and wood chips. Metal sawdust extraction fan – durable steel impeller provides quiet, vibration-free operation. Heavy-duty steel construction – powder-coated finish protects against corrosion and mechanical damage. Adjustable leveling feet – allow precise machine positioning even on uneven surfaces. Six collection bags (200 L each) – increased waste capacity reduces the frequency of emptying. Quick bag replacement system – steel clamps allow fast, tool-free bag removal. Connection for up to four machines – extraction manifold with 1 × Ø180 mm and 4 × Ø100 mm ports provides flexible installation options. Construction and Technology The FM350 is equipped with a robust steel extraction fan and a reinforced frame designed for intensive industrial use. High-quality components ensure durability, overload resistance, and reliable operation during continuous production. The modern bag mounting system allows quick and convenient maintenance, while the powder-coated steel housing provides additional protection against wear and harsh workshop conditions. Precision and Performance Thanks to its large filter surface area and high suction pressure, the CORMAK FM350 dust collector provides excellent working conditions even during intensive woodworking operations. Efficient dust separation helps maintain cleaner air, improves workplace comfort, and increases operator safety. Dedpfsvu Rx Iox Aggscl Applications The FM350 is ideal for: Wood processing plants – extraction of chips and dust from saws, planers, and milling machines. Professional woodworking workshops – suitable for multi-station operation. Technical schools and educational workshops – efficient dust extraction for training environments. Large industrial halls – where a high-capacity sawdust extraction system is required. Standard Equipment 3 fabric filter bags 3 fabric waste collection bags Extraction manifold: 1 × Ø180 mm / 4 × Ø100 mm Optional Equipment Galvanized hose clamps 3-micron filter cartridge insert Technical Specifications Specification Value Airflow capacity 4,860 m³/h Collection bag capacity 3 × 200 L Number of bags 6 Extraction inlets 1 × Ø180 mm, 4 × Ø100 mm Overall dimensions (L × W × H) 2,355 × 590 × 2,150 mm Weight 125 kg Motor power 3.8 kW Power supply 3-phase, 400 V

Condition: new, functionality: fully functional, Year of construction: 2026, The CORMAK FM230 Dust Collector is a professional dust extraction system designed for small and medium-sized woodworking workshops. Featuring a compact design, 1,000 m³/h airflow capacity, and a standard 230 V power supply, it efficiently removes sawdust, wood chips, and fine dust without requiring costly electrical upgrades. Equipped with a durable WhirlWind metal impeller and a mobile wheeled base, the FM230 combines reliable performance with high build quality for everyday workshop use. Key Features High extraction capacity of 1,000 m³/h – effectively removes sawdust, chips, and dust from woodworking machines. Standard 230 V power supply – plugs into a conventional mains outlet without electrical modifications. WhirlWind metal impeller – provides stable operation, excellent durability, and resistance to heavy workloads. Mobile wheeled base – allows easy movement around the workshop using robust bearing-mounted wheels. Sealed filtration system – efficiently separates dust particles, helping maintain cleaner workshop air. Ø100 mm extraction inlet – compatible with most woodworking machines and extraction hose systems. Construction and Technology The FM230 is equipped with a multi-blade steel impeller engineered for high airflow performance while maintaining relatively low operating noise. The machine is mounted on a sturdy mobile frame, making it easy to reposition even in confined workshop spaces. The dust collector features two heavy-duty bags—a filter bag and a collection bag—manufactured from durable materials that provide excellent airflow while maintaining effective filtration. A quick-release clamping system allows fast bag removal and replacement without the need for tools. Performance and Efficiency The CORMAK FM230 woodworking dust collector is highly effective at extracting dust directly from machines such as: Panel saws Surface planers Thickness planers Spindle moulders Tenoning machines With an airflow capacity of 1,000 m³/h, the FM230 maintains a clean working environment even during intensive woodworking operations. Weighing just 27 kg, its compact footprint makes it an excellent choice for workshops where space is limited. Applications The FM230 is ideal for: Professional and hobby woodworking workshops Joinery and furniture production Cutting, routing, planing, and sanding wood-based materials Machines equipped with Ø100 mm extraction ports Mobile workstations requiring a portable dust extraction solution Standard Equipment Fabric filter bag Waste collection bag WhirlWind metal impeller Mobile base with wheels Bag mounting clamps Optional Equipment Flexible Ø100 mm extraction hoses Y-connectors and reducers for multiple machine connections High-efficiency filter bags Noise reduction silencers Technical Specifications Specification Value Motor power 0.75 kW Airflow capacity 1,000 m³/h Maximum vacuum pressure 1,020 Pa Noise level 70 dB Collection bag capacity 60 L Dcedjvu Az Uopfx Aggsl Number of bags 2 Extraction inlet diameter Ø100 mm Height 1,500 mm Width 420 mm Length 600 mm Power supply 230 V / 50 Hz Weight 27 kg

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM300SA Dust Collector is an advanced industrial dust extraction system designed for intensive operation in woodworking shops, industrial facilities, and furniture manufacturing plants. Combining an impressive 3,900 m³/h extraction capacity, robust construction, and excellent suction performance, the FM300SA is built for demanding environments requiring reliable, continuous operation with large volumes of waste material. Equipped with four fabric filter bags and a WhirlWind series multi-blade metal impeller, the FM300SA provides efficient dust separation, stable airflow, and long-lasting performance in professional production environments. Key Features 2.2 kW / 400 V motor – ensures stable and efficient industrial operation. Extraction capacity of 3,900 m³/h – enables effective dust removal from multiple workstations simultaneously. WhirlWind multi-channel metal impeller – dynamically balanced for high efficiency, quiet operation, and vibration-free performance. Four fabric filter bags – provide an increased filtration area for longer operation with fewer interruptions. Reinforced steel construction with additional support brackets – ensures excellent stability and durability under heavy loads. Quick-release bag mounting system – allows convenient, tool-free bag replacement. Four-point sealing system – improves overall system tightness and maintains maximum suction efficiency. Mobile base with bearing-mounted wheels – enables easy movement around production halls and workshops. Construction and Technology The heart of the FM300SA is a precisely balanced WhirlWind multi-blade metal fan, designed to generate powerful and consistent suction pressure. The construction has been engineered for intensive industrial use, with reinforced supports and a double load-bearing structure ensuring maximum stability even when the collection bags are fully loaded. All critical connection points are fitted with flexible seals to improve airtightness and minimize suction losses. The multi-bag filtration system efficiently separates extracted air from sawdust and wood waste, ensuring reliable dust collection performance. Precision and Performance Dodpfxjvu A Dij Aggecl The CORMAK FM300SA chip extractor allows simultaneous operation with multiple woodworking machines thanks to its flexible extraction configuration: 1 × Ø150 mm extraction inlet, or 3 × Ø100 mm extraction inlets The four fabric filter bags provide a total capacity of 220 litres, reducing the frequency of emptying and improving production continuity. The unit operates smoothly, quietly, and with minimal vibration, contributing to improved operator comfort and efficient dust control. Standard Equipment 4 fabric filter bags Mobile metal base with bearing-mounted wheels Optional Equipment Galvanized hose clamps for extraction hose installation Cartridge filter with filtration efficiency down to 2 microns Technical Specifications Specification Value Extraction capacity 3,900 m³/h Maximum vacuum pressure 1,750 Pa Noise level 75 dB Filter bag capacity 220 L Number of bags 4 × fabric filter bags Extraction inlet 1 × Ø150 mm / 3 × Ø100 mm Overall dimensions (L × W × H) 1,400 × 570 × 2,250 mm Weight 64 kg Motor power 2.2 kW Power supply 3-phase, 400 V Operating manual CE Declaration of Conformity Yes

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM500 Dust Collector is a heavy-duty industrial dust extraction system designed for intensive use in large woodworking shops, furniture manufacturing plants, and production facilities. With an impressive 5,000 m³/h airflow capacity, a robust steel construction, and the ability to connect up to four woodworking machines simultaneously, the FM500 delivers reliable, continuous dust extraction while maintaining a clean, safe, and efficient working environment. Key Features 2.8 kW (S1) three-phase motor / 400 V – designed for continuous industrial operation. Airflow capacity of 5,000 m³/h – efficiently extracts sawdust, wood chips, and fine dust from up to four machines at the same time. Vacuum pressure up to 2,500 Pa – provides consistent suction performance, even under heavy dust loads. High-efficiency metal impeller – dynamically balanced for smooth, low-vibration, and quiet operation. Quick-release collection bag system – allows fast and tool-free bag replacement. Large 480 L waste collection capacity – minimizes downtime by reducing the frequency of bag emptying. Multi-port inlet manifold (Ø200 mm / 4 × Ø100 mm) – compatible with multiple woodworking machines. Mobile wheeled base – enables easy movement around workshops and production facilities. Construction and Technology Dodpfjvu Aqpjx Aggecl The FM500 is built around a heavy-duty steel frame that ensures durability and long-term stability. A large-diameter, high-performance fan operating at 2,950 rpm generates an air velocity of up to 31 m/s, delivering powerful and consistent extraction performance. The machine is equipped with woven fabric filter bags (Class II filtration) capable of capturing dust particles as small as 5 microns, helping maintain clean air in the workplace while supporting compliance with occupational health and safety standards. Performance and Efficiency The CORMAK FM500 woodworking dust collector maintains stable suction power during prolonged operation, making it suitable for continuous production environments. It can effectively serve up to four workstations simultaneously without compromising extraction performance. The large filter surface area and high-capacity collection bags reduce maintenance intervals and maximize productivity. Applications The FM500 is ideal for: Woodworking and furniture manufacturing workshops Timber processing and panel production facilities Technical schools and vocational training centres with multiple workstations Production lines requiring centralized dust extraction systems Standard Equipment Two fabric filter bags Two waste collection bags Inlet manifold (4 × Ø100 mm + 1 × Ø200 mm) Mobile base with heavy-duty wheels Optional Equipment Cartridge filter (2-micron filtration) Flexible extraction hoses (Ø100 mm / Ø200 mm) Galvanized hose clamps Technical Specifications Specification Value Motor power (S1) 2.8 kW Power supply 3-phase, 400 V / 50 Hz Motor speed 2,950 rpm Airflow capacity 5,000 m³/h Maximum vacuum pressure Up to 2,500 Pa Air velocity Up to 31 m/s Filter bags Woven fabric (Class II filtration) Waste collection capacity 480 L Inlet connections 1 × Ø200 mm / 4 × Ø100 mm Overall dimensions (L × W × H) 1,525 × 560 × 2,460 mm Weight 64 kg

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM230-L1 Dust Collector is a professional dust extraction system designed for woodworking shops and workshops that require efficient dust collection while operating in limited spaces. Powered by a 0.75 kW motor and equipped with a high-performance impeller, it delivers an airflow capacity of 1,150 m³/h for effective removal of sawdust, wood chips, and fine dust from woodworking machines and workstations. It is a reliable solution for both professional production facilities and home workshops. Key Features Airflow capacity of 1,150 m³/h – efficiently removes sawdust, wood chips, and fine dust from machines and work areas. 0.75 kW (S1) continuous-duty motor – designed for reliable long-term operation on a standard 230 V power supply without requiring electrical upgrades. WhirlWind metal impeller – dynamically balanced for smooth, quiet operation and long service life. Mobile base – four heavy-duty bearing-mounted wheels and an ergonomic handle make transportation around the workshop easy. Sealed steel housing – minimizes dust leakage while reducing vibration for improved operating comfort. Universal Ø100 mm extraction port – compatible with most woodworking machines and dust extraction hose systems. Vacuum hose with cleaning nozzle – allows the unit to be used for cleaning floors and workstations as well as machine extraction. Construction and Technology The CORMAK FM230-L1 woodworking dust collector features a durable steel housing and a high-efficiency multi-blade metal impeller that generates strong suction while maintaining a low noise level. Integrated seals reduce dust emissions, helping keep the workshop cleaner and improving operator comfort. The machine is mounted on a robust mobile frame with four wheels and an ergonomic transport handle, allowing it to be moved quickly between workstations without interrupting production. Performance and Efficiency The FM230-L1 delivers reliable continuous performance thanks to its S1-rated motor. Operating at 2,800 rpm, it provides powerful airflow for efficient extraction from machines such as: Thickness planers Circular saws Spindle moulders Dcsdpfxovu A Eas Aggol Belt sanders The combined 60 L collection capacity allows extended operation before emptying the bags, helping to reduce downtime. Applications The FM230-L1 is ideal for: Woodworking and furniture manufacturing workshops Technical schools and vocational training centres Home workshops and hobby woodworking Service workshops requiring localized dust extraction for light to medium dust loads Standard Equipment Fabric filter bag Waste collection bag Mobile wheeled base High-performance metal impeller Flexible vacuum hose with cleaning nozzle Bag mounting clamps Optional Equipment High-efficiency filter bags Extraction reducers and Y-connectors Antistatic Ø100 mm extraction hoses Multi-machine distribution manifolds Technical Specifications Specification Value Motor power (S1) 0.75 kW Motor speed 2,800 rpm Airflow capacity 1,150 m³/h Maximum vacuum pressure 1,020 Pa Noise level 65 dB Collection bag capacity 60 L Number of bags 2 Extraction inlet diameter Ø100 mm Height 1,550 mm Width 420 mm Length 800 mm Power supply 230 V Weight 27 kg

Condition: new, functionality: fully functional, Year of construction: 2026, The CORMAK FM300S Dust Collector is a high-performance dust extraction system designed for intensive operation in woodworking shops, furniture manufacturing facilities, and the timber industry. Equipped with a 2.2 kW motor, large-capacity collection bags, and an extraction capacity of up to 3,900 m³/h, this industrial sawdust collector provides efficient and safe dust removal even in demanding production environments. Key Features 2.2 kW / 400 V motor – designed for continuous industrial operation. Airflow capacity of 3,900 m³/h – efficiently extracts sawdust and wood chips from multiple workstations simultaneously. WhirlWind multi-blade metal impeller – dynamically balanced to ensure quiet, stable, and vibration-free operation. Reinforced steel construction with additional supports – provides excellent durability and structural rigidity. Quick-release bag mounting system – enables convenient operation and fast bag replacement without tools. Mobile base with bearing-mounted wheels – allows easy movement around production halls and workshops. Highly sealed extraction system – four flexible sealing elements at critical points minimize air leakage and maintain suction efficiency. Construction and Technology The CORMAK FM300S woodworking dust collector is equipped with a WhirlWind series metal impeller, precisely balanced and designed for intensive industrial use. The entire structure has been reinforced with additional supports and brackets capable of handling the weight of fully loaded collection bags. The housing is manufactured from thick steel resistant to deformation, while specially designed sealing elements improve system tightness by reducing vacuum losses and increasing overall extraction efficiency. Djdpovu Artjfx Aggjcl Performance and Efficiency The FM300S delivers excellent extraction performance when operating with multiple machines simultaneously. The system allows connection through: 1 × Ø150 mm extraction inlet, or 3 × Ø100 mm extraction inlets The large filtration surface and four high-capacity bags (2 filter bags and 2 waste collection bags) enable long periods of maintenance-free operation with minimal downtime. This powerful sawdust extraction system is designed to meet the requirements of demanding professional users. Applications The CORMAK FM300S is ideal for: Furniture manufacturing plants and professional woodworking shops – as a central chip extraction system for multiple machines. Industrial workshops processing wood, MDF, plywood, and other wood-based materials. Production lines requiring reliable dust extraction as part of automated processes. Technical schools and training centres – providing an efficient and safe solution for educational workshops. Standard Equipment 2 fabric filter bags 2 plastic waste collection bags Metal mobile base with bearing-mounted wheels Optional Equipment Galvanized hose clamps High-efficiency filter cartridge with filtration down to 2 microns Technical Specifications Specification Value Airflow capacity 3,900 m³/h Maximum vacuum pressure 1,750 Pa Noise level 75 dB Collection bag capacity 150 L Number of bags 2 × fabric (filtering), 2 × plastic (waste collection) Extraction inlet 1 × Ø150 mm or 3 × Ø100 mm Overall dimensions (L × W × H) 1,400 × 570 × 1,960 mm Weight 64 kg Motor power 2.2 kW Power supply 3-phase, 400 V Operating manual (DTR) CE Declaration of Conformity Yes

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM230DBK Dust Collector is a professional dust extraction unit designed for the efficient removal of sawdust, wood chips, and dust generated during the machining of wood, metal, and plastics. With its compact design, high suction pressure, and 1,000 m³/h airflow capacity, it is an ideal solution for woodworking shops, technical schools, and craft workshops. Its lightweight construction, quiet operation, and excellent mobility make it a practical and efficient dust collector for users seeking reliable performance in a compact package. Key Features 1,000 m³/h airflow capacity – efficiently removes sawdust, chips, and dust from a single workstation. 0.75 kW motor powered by 230 V – operates from a standard mains outlet without requiring electrical modifications. Ø230 mm metal impeller – dynamically balanced for smooth, quiet operation and long service life. Vacuum pressure up to 1,030 Pa – delivers powerful suction, even when handling heavy or damp wood chips. Adjustable Ø100 mm extraction inlet – compatible with a wide range of woodworking and industrial machines. Mobile wheeled base – allows the unit to be moved easily between workstations. 56 L collection bag – reduces the frequency of emptying and supports uninterrupted operation. Low noise level (approx. 70 dB) – provides comfortable operation in enclosed workshop environments. Construction and Technology The CORMAK FM230DBK woodworking dust collector is built around a proven impeller-based extraction system. Its 230 mm dynamically balanced metal fan operates at high speed to generate stable suction, ensuring efficient removal of dust and chips directly from woodworking machinery. The 56 L textile collection bag is mounted on a sturdy steel frame for quick removal and replacement, helping maintain continuous productivity. The entire unit is installed on a mobile base with four wheels, making it easy to reposition even in confined workshop spaces. The adjustable Ø100 mm extraction inlet allows simple connection to a variety of machines with different dust extraction configurations. Performance and Efficiency The FM230DBK combines powerful extraction performance with quiet, energy-efficient operation. Its large-diameter metal impeller and high static pressure significantly reduce the risk of clogging, while the 1,030 Pa vacuum pressure effectively captures heavier particles and larger wood chips. Dcsdjvu Aprjpfx Aggol Thanks to its relatively low operating noise, the unit is well suited for enclosed workshops where maintaining a comfortable working environment is important. Standard Equipment Mobile wheeled base Heavy-duty steel support frame Flexible extraction hose with nozzle 56 L textile collection bag Adjustable Ø100 mm extraction inlet Optional Equipment High-efficiency filter bags Multi-point extraction manifolds Antistatic Ø100 mm flexible hoses Reducers and adapters for non-standard machine connections Technical Specifications Specification Value Motor power 0.75 kW Power supply 230 V / 50 Hz Airflow capacity 1,000 m³/h Maximum vacuum pressure 1,030 Pa Impeller diameter Ø230 mm Extraction inlet diameter Ø100 mm Collection bag capacity 56 L Noise level Approx. 70 dB Overall dimensions 1,100 × 500 × 1,300 mm Weight 21 kg

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK FM300 Dust Collector – High-Performance Sawdust Extraction System The CORMAK FM300 is a high-performance dust extraction unit designed for use in medium and large woodworking shops, furniture factories, and production facilities. Equipped with a 1.5 kW motor, a durable metal impeller, and large-capacity 150 L filter bags, it provides a reliable and long-lasting solution for efficient dust extraction from woodworking machines and workstations. With an airflow capacity of 2,530 m³/h, the FM300 can effectively support several machines at the same time. Key advantages High airflow capacity of 2,530 m³/h – efficiently removes large amounts of sawdust and dust in a short time. 1.5 kW motor – reliable and energy-efficient drive powered by a 230 V supply. Metal dynamically balanced impeller – ensures quiet, stable, and vibration-free operation over a long service life. Large 150 L bag capacity – reduces the need for frequent emptying and improves workflow efficiency. Y-type suction outlet – 2 × Ø100 mm or 1 × Ø130 mm – allows extraction from two workstations simultaneously or from one larger machine. Mobile steel construction – four transport wheels make it easy to move the unit around the workshop. Quick bag mounting system – simplifies maintenance and saves operator time. Construction and technology The CORMAK FM300 woodworking dust collector has been designed for intensive operation in industrial environments. The core of the machine is a centrifugal sawdust fan equipped with a metal impeller, dynamically balanced to eliminate vibration and reduce operating noise. The robust steel construction ensures durability and resistance to mechanical damage. The standard Y-type outlet enables quick connection of hoses to various woodworking machines. Precision and performance The FM300 provides highly efficient dust extraction under demanding working conditions. The 2,850 rpm motor maintains a stable airflow, allowing continuous operation with multiple woodworking machines. The dual-bag system, consisting of a filter bag and a collection bag with a total capacity of 150 liters, enables long operating cycles with minimal downtime. Applications The CORMAK FM300 is suitable for: Professional woodworking and furniture factories – for use with panel saws, thickness planers, routers, and sanding machines. Dcsdpfsy Exn Rex Aggjl Small production lines – as a central sawdust extraction system for several workstations. Technical schools and training workshops – safe, efficient, and easy-to-use dust extraction. Service workshops – point extraction for medium and high-intensity woodworking operations. Standard equipment Y-type suction outlet (2 × Ø100 mm or 1 × Ø130 mm) Mobile metal base Two fabric bags: filter bag and collection bag Optional equipment Ø100 mm extraction hose Galvanized hose clamps Disposable plastic collection bags Technical specifications Parameter Value Extraction capacity 2,530 m³/h Vacuum pressure 1,800 Pa Noise level 70 dB Motor speed 2,850 rpm Motor power 1.5 kW Power supply 230 V Bag capacity 150 L Number of bags 2 Suction outlet diameter 1 × Ø130 mm or 2 × Ø100 mm Dimensions (L × W × H) 940 × 510 × 1960 mm Weight 56 kg Technical documentation (DTR) Included CE Declaration of Conformity Included

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM230A Dust Collector is a high-performance dust extraction system designed for the efficient removal of sawdust, wood chips, and fine wood dust generated during woodworking operations. This compact and versatile dust collector is ideal for woodworking workshops, production facilities, and home workshops where effective dust extraction is essential for maintaining a clean and safe working environment. The FM230A comes supplied with a 2.5 m flexible Ø100 mm extraction hose, allowing quick and convenient connection to woodworking machines such as planers, table saws, spindle moulders, and thickness planers. The flexible hose enables the dust collector to be positioned wherever needed within the workshop, ensuring efficient extraction directly at the source of dust and chip generation. Its powerful extraction fan delivers an airflow capacity of up to 1,080 m³/h, providing rapid and efficient removal of sawdust and airborne dust particles. A robust steel construction combined with a heavy-duty metal impeller ensures stable operation, long service life, and reliable performance even under intensive daily use. The mobile wheeled base allows easy transportation between workstations, while the dual-bag filtration system effectively separates air from collected waste. As a result, the FM230A helps maintain a cleaner workshop while improving operator safety, visibility, and overall working comfort. Key Features Supplied with a 2.5 m Ø100 mm flexible extraction hose Airflow capacity up to 1,080 m³/h for efficient dust and chip extraction High-performance fan for sawdust, chips, and fine wood dust 0.75 kW single-phase motor (230 V) suitable for standard power outlets Durable metal impeller for long-lasting, reliable operation Mobile design with transport wheels for easy repositioning Efficient dual-bag filtration system Large waste collection bag for extended operating time Compact footprint, ideal for small and medium-sized woodworking workshops Applications The CORMAK FM230A woodworking dust collector is suitable for use with a wide range of woodworking machinery, including: Surface planers and jointers Thickness planers Table saws Spindle moulders Wood sanding machines Dcsdpeytn Tdjfx Aggel Its high airflow capacity effectively removes sawdust and wood dust generated during machining, improving workplace visibility while reducing airborne dust levels. Standard Equipment CORMAK FM230A dust collector Ø100 mm flexible extraction hose (2.5 m) Fabric filter bag Waste collection bag Bag retaining clamps Mobile wheeled base Technical Specifications Specification Value Motor power 0.75 kW Power supply 230 V / 50 Hz Airflow capacity 1,080 m³/h Motor speed 2,800 rpm Maximum vacuum pressure 1,000 Pa Noise level 68 dB Number of bags 2 Extraction inlet diameter Ø100 mm Extraction hose length 2.5 m Collection bag capacity 90 L Height 1,800 mm Width 750 mm Length 450 mm Weight 27 kg

Condition: new, Year of construction: 2026, DCV8900TC VIBER Industrial Dust Collector – Advanced Extraction System with Automatic Filter Cleaning The DCV8900TC VIBER is a modern industrial dust extraction system designed for intensive operation in professional woodworking plants and industrial production facilities. Combining advanced technology with maximum efficiency, it ensures stable extraction performance while reducing noise and vibration levels. The integrated VIBER automatic filter cleaning system minimizes maintenance requirements and maximizes operational reliability. Key advantages VIBER system – automatic filter shaking and cleaning without interrupting operation. TC acoustic enclosure – effective noise insulation and vibration reduction. DAMAGE PROTECT system – mechanical protection against the intake of hard foreign objects. REHEAT heat recovery system – recovers heat from exhausted air, improving energy efficiency. High airflow capacity of 8,900 m³/h – designed for large industrial facilities. Dsdpfx Asudaazsggscl High airtightness construction – cleaner air and reduced heat loss inside the production hall. Construction and technology The extraction unit is equipped with a reinforced metal impeller that is dynamically balanced to ensure stable, quiet, and reliable operation. The fan blade geometry has been optimized for maximum suction efficiency and reduced energy consumption. The integrated REHEAT system enables recovery of thermal energy from discharged air, significantly lowering operating costs and improving the overall efficiency of the ventilation system. Precision and performance The DCV8900TC VIBER maintains a constant suction velocity of 28–32 m/s, even when operating with multiple machines simultaneously. Polyester filters with a filtration accuracy of up to 5 microns, with the option of installing HEPA filters, ensure excellent air quality in demanding industrial environments. The automatic filter cleaning system maintains consistent airflow performance and reduces downtime associated with manual maintenance. Applications The DCV8900TC VIBER is designed for large-scale woodworking, furniture manufacturing, and industrial production facilities. It is ideal for extraction from machines such as: edge banding machines sanding machines panel saws format saws CNC woodworking equipment The unit works perfectly as a central dust extraction system for multiple production stations operating simultaneously. Standard equipment Automatic VIBER filter cleaning system TC acoustic insulated enclosure REHEAT heat recovery system DAMAGE PROTECT protection system Control cabinet Metal waste containers (500 L) Polyester filter cartridges Optional equipment HEPA filter system Additional air distribution system Ceiling-mounted extraction connections Technical specifications Parameter Value Motor power 7.5 kW / 400 V, 50 Hz Motor speed 3,000 rpm Extraction capacity 8,900 m³/h Maximum vacuum pressure 3,000 Pa Noise level 80 dB Suction inlet diameter 300 mm Air velocity 28–32 m/s Filter surface area 20 m² Filter material Polyester, 5 microns / filter category "G" Number of filters 45 Dimensions (L × W × H) 2400 × 1170 × 2240 mm Weight 500 kg

Condition: new, Year of construction: 2026, SCV15000TC VIBER BIG-BAG is a professional industrial dust extraction system designed for large woodworking facilities and industrial production lines. Equipped with two high-capacity BIG-BAG containers, it ensures maximum operational continuity and simplified handling while minimizing downtime. It is an ideal solution for extracting sawdust and dust from high-demand machinery requiring highly efficient air filtration. Dcodpfxoup Difo Aggjl Key Advantages Capacity of 15,000 m³/h – ensures effective extraction even in the most demanding industrial applications 18.5 kW power output – high-efficiency S1-duty motor designed for continuous operation in harsh conditions VIBER system – automatic filter shaking system extending filter lifespan TC housing – fully sound-insulated enclosure reducing noise and vibration Two BIG-BAG containers – significantly increased waste capacity and more convenient unloading REHEAT – heat recovery system from exhaust air, reducing energy losses DAMAGE PROTECT – mechanical protection of the impeller and suction duct against damage caused by large objects Construction and Technology The SCV15000TC VIBER BIG-BAG is built on a rigid steel structure designed for intensive use in demanding industrial environments. The chip extraction fan features a dynamically balanced impeller with aerodynamically optimized blades, ensuring consistently high performance with low noise levels. The filtration unit consists of 117 polyester filter cartridges with a filtration surface area adapted to intensive dust extraction processes. Precision and Performance Thanks to high vacuum pressure and a large inlet diameter (400 mm), the extractor efficiently removes chips, dust, and sawdust from multiple workstations simultaneously. The design allows operation as a central extraction system, enabling full integration with an entire production line. High energy efficiency and the automatic filter cleaning system significantly reduce the need for frequent servicing, lowering operating costs. Applications The SCV15000TC VIBER BIG-BAG is recommended for operation with: panel saws and sliding table saws wide belt sanders edge banders and CNC milling machines automated woodworking and wood-based material processing lines Standard Equipment VIBER automatic filter cleaning system Polyester filters (117 pcs) TC sound-insulated housing DAMAGE PROTECT protection system Control cabinet with main switch Two BIG-BAG containers with support frames Optional Equipment HEPA filters for particles below 5 microns Bag fill level sensor Automatic shut-off valve Spark detection and fire suppression system Technical Specifications Power supply voltage: 400 V Motor power: 18.5 kW Rotational speed: 3000 rpm Filter type: Polyester, 5 microns / filter category “G” Filter dimensions: Ø160 × 960 mm Filtration area: 59 m² Number of filters: 117 pcs Inlet diameter: 400 mm Capacity: 15,000 m³/h Vacuum pressure: 3000 Pa Air velocity: 40 m/s Noise level: 80 dB Number of BIG-BAGs: 2 pcs BIG-BAG capacity: 1250 L each / 2500 L total Dimensions (L × W × H): 3850 × 1500 × 3800 mm Weight: 1150 kg

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM470 Dust Collector is a high-performance industrial sawdust extraction system designed for large woodworking workshops and industrial production facilities. Equipped with a robust construction and a multi-fan extraction system, it delivers maximum efficiency and reliability in demanding working conditions. Key Features Impressive airflow capacity of 6,800 m³/h – provides efficient extraction of sawdust and wood chips from multiple workstations simultaneously. 5.6 kW motor – three-phase 400 V power supply ensures stable and reliable continuous operation. Balanced metal impeller – guarantees smooth, quiet, and vibration-free performance. Large collection capacity with 8 × 200 L bags – reduces emptying frequency and enables uninterrupted operation. Heavy-duty steel construction – powder-coated housing provides excellent resistance to mechanical damage and corrosion. Construction and Technology The CORMAK FM470 woodworking dust collector is equipped with a durable steel fan featuring a precisely balanced impeller, ensuring stable airflow and long service life. The housing is manufactured from thick steel profiles, protecting the unit against mechanical damage and demanding workshop conditions. The bag mounting system with clamps and fastening rings allows quick installation and replacement of large fabric filter bags. The design also provides easy access for maintenance and servicing. Precision and Performance The high efficiency of the FM470 dust extraction system results from optimized fan geometry and a large filtration surface area provided by the collection bags. Stable airflow ensures effective removal of dust and chips, improving machine performance, workplace cleanliness, and operator comfort. Applications The FM470 is ideal for: Industrial woodworking and furniture manufacturing plants – extraction of chips from routers, planers, saws, and thickness planers. Factories and production halls requiring clean air and high-capacity dust extraction. Technical schools and educational workshops – providing a safer working environment. Mobile and central dust extraction systems – serving as a powerful industrial sawdust collector. Standard Equipment 8 fabric filter bags (200 L each) Bag mounting system (clamps and fastening rings) Optional Equipment Dcodpfovu Ryrjx Aggjl Ø100 mm extraction hose Galvanized hose clamp Technical Specifications Specification Value Extraction capacity 6,800 m³/h Collection bag capacity 8 × 200 L Number of bags 8 Extraction inlet 1 × Ø180 mm, 4 × Ø100 mm Overall dimensions (L × W × H) 3,560 × 580 × 2,200 mm Weight 152 kg Motor power 5.6 kW Power supply 3-phase, 400 V

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM340 230V Dust Collector is a modern dust extraction system designed for efficient and quiet dust removal from woodworking machinery in workshop and light industrial environments. Equipped with a 1.5 kW single-phase motor and a large dynamically balanced metal impeller, it delivers an impressive 3,200 m³/h airflow capacity while operating from a standard 230 V power supply. It is an ideal solution for users looking for a compact, mobile, and reliable dust collector for sawdust, wood chips, and fine dust. Key Features Powerful 1.5 kW / 230 V motor – provides stable, high-performance operation without requiring a three-phase power supply. Airflow capacity up to 3,200 m³/h – efficiently extracts sawdust and dust from multiple woodworking machines simultaneously. 300 mm dynamically balanced impeller – ensures smooth, quiet, and vibration-free operation. Heavy-duty steel housing and metal impeller – designed for durability, rigidity, and long service life. 180° rotating inlet head – allows flexible positioning of extraction hoses to suit various workshop layouts. Mobile wheeled base – makes it easy to move the unit between workstations. Quick-release bag mounting system – enables fast, tool-free replacement of collection bags. Construction and Technology The CORMAK FM340 230V woodworking dust collector features a large metal extraction fan housed in a robust steel casing that provides excellent structural rigidity and durability for intensive daily use. Its 180° rotating inlet head allows the air intake to be positioned for convenient hose routing in different workshop configurations. The unit is supplied with a fabric filter bag and a 190 L plastic collection bag, allowing long operating periods before emptying is required. Performance and Efficiency With a motor speed of 2,850 rpm and a 300 mm impeller, the FM340 delivers powerful, consistent airflow and highly effective separation of sawdust and dust particles. The dust collector easily handles machines that generate large volumes of waste, including: Sliding table saws Thickness planers Spindle moulders The versatile extraction system offers either: One Ø150 mm extraction inlet, or Dcodpevu Aykjfx Aggjl Three Ø100 mm extraction ports providing maximum flexibility when configuring workshop extraction systems. Applications The FM340 230V is ideal for: Woodworking workshops Furniture manufacturing facilities Educational woodworking laboratories Professional and hobby workshops requiring powerful dust extraction from a standard 230 V power supply Standard Equipment One fabric filter bag One plastic collection bag Transport wheels Extraction inlet configuration: Ø150 mm or 3 × Ø100 mm Optional Equipment Ø100 mm flexible extraction hoses (various lengths) Galvanized hose clamps Additional plastic or fabric collection bags Technical Specifications Specification Value Motor power 1.5 kW / 230 V Motor speed 2,850 rpm Maximum airflow capacity 3,200 m³/h Maximum vacuum pressure 1,900 Pa Noise level 70 dB Impeller diameter 300 mm Extraction inlet Ø150 mm or 3 × Ø100 mm Collection bag capacity 190 L (500 × 1,100 mm) Overall dimensions (L × W × H) 985 × 560 × 2,210 mm Weight 45 kg

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK FM300 Dust Collector – High-Performance Extraction System for Professional Woodworking The CORMAK FM300 is a high-performance dust collector designed for intensive use in woodworking shops, furniture manufacturing facilities, and industrial production environments. Equipped with a 1.5 kW three-phase motor, a dynamically balanced steel impeller, and a robust steel frame, the unit delivers reliable extraction of sawdust, wood chips, and fine dust with an impressive airflow capacity of 2,530 m³/h. It is an ideal solution for professionals seeking durability, efficiency, and dependable performance. Key advantages High extraction capacity of 2,530 m³/h – suitable for operating multiple woodworking machines simultaneously. 1.5 kW three-phase motor (400 V) – delivers consistent power and reliable continuous-duty performance. Dedpfxsvu Atwo Aggecl Dynamically balanced steel impeller – ensures smooth, quiet operation with minimal vibration and extended service life. Large 150 L collection bags – reduce downtime by requiring less frequent emptying. Y-shaped inlet – configurable as 2 × Ø100 mm or 1 × Ø130 mm for flexible machine connections. Mobile steel base with four caster wheels – allows easy movement between workstations. Quick-release fabric collection bags – simplify maintenance and improve operator convenience. Construction and technology The CORMAK FM300 features a heavy-duty welded steel frame mounted on swivel casters, providing both stability and mobility. At the heart of the system is a high-efficiency centrifugal fan equipped with a dynamically balanced steel impeller, delivering powerful suction with low noise and vibration levels. The versatile Y-shaped inlet allows fast switching between single- and dual-hose configurations, making the unit adaptable to a wide variety of workshop layouts. Precision and performance Operating at 2,850 rpm, the FM300 generates strong airflow capable of efficiently extracting both fine dust and heavier wood chips produced by sawing, planing, routing, and sanding operations. The generous bag capacity minimizes interruptions, while the optimized fan design helps prevent clogging and ensures uninterrupted operation even under demanding production conditions. Applications The CORMAK FM300 is ideal for: professional woodworking and furniture workshops extraction from table saws, thickness planers, jointers, spindle moulders, and routers industrial production facilities requiring central dust extraction technical schools and vocational training workshops carpentry businesses and custom woodworking shops Standard equipment Y-shaped steel inlet (2 × Ø100 mm or 1 × Ø130 mm) Mobile steel base with four caster wheels Two fabric bags (filter bag and collection bag) Optional equipment Flexible Ø100 mm suction hose (custom lengths available) Galvanized hose clamps Disposable plastic collection bags for quick replacement Technical specifications Parameter Value Airflow capacity 2,530 m³/h Maximum vacuum 1,800 Pa Noise level 70 dB Motor speed 2,850 rpm Motor power 1.5 kW Power supply 400 V / 3-phase Collection bag capacity 150 L Number of bags 2 (filter bag + collection bag) Suction inlet 1 × Ø130 mm or 2 × Ø100 mm Dimensions (L × W × H) 940 × 510 × 1960 mm Weight 56 kg User manual Included CE Declaration of Conformity Included

Condition: new, Year of construction: 2026, MDC750 Metal Dust and Chip Extractor – 400V is a high-performance extraction unit designed for metalworking stations where effective removal of contaminants such as metal chips, filings, and dust is essential. Thanks to its compact design, durable motor, and high extraction efficiency, it is a reliable solution for professional metalworking workshops, production plants, and workstations equipped with belt, bench, and disc grinders. This metal extraction system provides a clean and safe working environment while maintaining stable extraction performance. Main advantages of the machine High extraction efficiency – airflow capacity up to 1800 m³/h without a bag, ensuring effective removal of even fine metal dust and filings. Compact design – a stable, well-balanced housing allows operation in limited workshop spaces. Quick access to the collection container – simplifies regular emptying and reduces downtime. Easy filter replacement – minimizes maintenance time. Suitable for various machines – an ideal metal chip extractor and grinder dust extraction system for small and medium-sized workshops. Design and technology The MDC750 has been designed for intensive operation in industrial environments. The construction is based on a durable steel housing and an efficient filtration system that effectively separates metal dust and chips. The suction unit is powered by a 0.75 kW motor, providing appropriate airflow parameters. The 350 mm diameter impeller generates stable suction pressure, allowing efficient removal of even heavier metal particles. The machine is equipped with a 1 × 100 mm suction port, making it compatible with the most common metalworking stations. The large collection container ensures long operating periods without frequent emptying. Precision and work efficiency The applied design solutions ensure constant performance during both metal chip extraction and fine dust removal. The extraction capacity of 1520 m³/h with a bag allows efficient operation of both single and multiple workstations. The compact dimensions make the unit easy to relocate and integrate into existing workshop layouts. Applications The MDC750 metal extractor is designed for professional applications, especially: bench, belt, and disc grinding stations, small and medium-sized metalworking workshops, metal component preparation and finishing stations, processes requiring effective removal of metal chips and dust. Dcjdpevugghsfx Aggjl Standard equipment Basic filter Chip and metal filing collection container 100 mm suction port Set of mounting components and consumable elements Technical specifications Motor power 0.75 kW Voltage 400V / 50 Hz Suction ports 1 × 100 mm Extraction capacity without bag 1800 m³/h Extraction capacity with bag 1520 m³/h Impeller diameter 350 mm Dimensions 870 × 560 × 1170 mm Weight 31 kg

Condition: new, Year of construction: 2026, functionality: fully functional, The FM 230N transport fan is a professional solution for the local extraction of sawdust, wood chips, and dust generated during wood processing. Its compact design, durable motor, and high efficiency make this sawdust blower an ideal component of dust extraction systems in carpentry shops, workshops, and for single- or multi-spindle machines. Key Advantages Effective sawdust extraction – capacity of 1000 m³/h enables efficient removal of contaminants directly from the workplace 0.75 kW motor – provides adequate torque with low energy consumption High impeller speed – 2950 rpm ensures intensive airflow 100 mm inlet diameter – allows easy connection to commonly used machines and systems Low weight (15 kg) – facilitates easy transport and installation at various workstations Design and Technology The FM 230N fan features a closed, welded steel construction with the impeller mounted directly on the motor shaft. This design eliminates power losses associated with belt drives and minimizes vibration. The housing has been optimized for airflow, ensuring stable operation even during continuous use. The electric motor is powered by 230V at a standard frequency of 50 Hz, allowing universal application in most workshops without the need for three-phase power installation. Dedpevu Ad Aofx Aggjcl Precision and Performance The FM 230N is designed for highly efficient transport of air containing lightweight wood particles. Thanks to its optimized impeller and airflow channel, the unit minimizes air resistance, enabling uninterrupted operation even with large volumes of chips and sawdust. It performs equally well as a transport fan for sawdust or as a local blower supporting woodworking machines. Applications The FM 230N is suitable for carpentry workshops, furniture manufacturing plants, and production facilities using machines that generate dust. It can operate independently or as part of a larger dust extraction system. Particularly recommended for use with: planers and jointers thickness planers spindle moulders edge banders circular saws Standard Equipment powder-coated steel housing 100 mm inlet port stable mounting base single-phase 230V motor Optional Equipment 100 mm flexible hoses dust collection bags Technical Specifications Parameter Value Motor power 0.75 kW Speed 2950 rpm Extraction capacity 1000 m³/h Inlet diameter 100 mm Outlet diameter 110 mm Voltage / Frequency 230 V / 50 Hz Dimensions (L × W × H) 430 × 400 × 340 mm Weight 15 kg

Condition: new, functionality: fully functional, Year of construction: 2026, The FM300N transport fan is a heavy-duty industrial-grade unit designed for efficient extraction of sawdust, dust, and fine wood waste in production plants and carpentry workshops. With a high capacity of 2530 m³/h and a powerful 1.5 kW three-phase motor, the unit effectively supports woodworking processes, ensuring cleanliness, safety, and smooth operation. The FM300N is a reliable sawdust blower engineered for intensive use and long service life. Key Advantages Extraction capacity of 2530 m³/h – effective contaminant removal even during high-intensity operation 1.5 kW three-phase motor – stable performance under continuous load Universal connection system – one 130 mm inlet or two independent 100 mm inlets Damage-resistant construction – durable metal housing Energy-efficient and low-noise operation – optimized power consumption and improved acoustic comfort Design and Technology The FM300N is built on a stable, welded steel frame resistant to dynamic loads and external factors typical of industrial environments. The high-efficiency aerodynamic impeller is mounted directly on the motor shaft, eliminating transmission-related power losses and ensuring long service life. Dcjdpfx Agevu Afgsgol The unit features two 100 mm suction ports (or one 130 mm port), allowing simultaneous operation of two workstations or connection to large-format machines. The 400 V three-phase motor provides sufficient power and operational stability in industrial facilities. A rotational speed of 2950 rpm guarantees intensive airflow, even during prolonged operation. The entire design has been optimized for easy installation and maximum use of workspace. Precision and Performance The FM300N is a dependable sawdust extraction unit capable of transporting wood by-products generated during machining—from fine sanding dust to heavier sawdust and chips. Its high airflow capacity ensures smooth operation of production workstations, reducing the risk of blockages and limiting the emission of contaminants in the working area. Applications The FM300N is intended for professional environments where durability and efficiency are essential. It can operate as a standalone sawdust fan or as part of an advanced dust extraction system. Typical applications include: carpentry workshops furniture manufacturing plants wooden component production departments workstations with circular saws, planers, spindle moulders, and sanders Standard Equipment powder-coated steel housing three-phase motor 400 V / 50 Hz suction port: 1 × 130 mm or 2 × 100 mm integrated base for stationary installation Optional Equipment bag filters flexible hoses Ø100 mm, Ø120 mm, Ø150 mm Technical Specifications Parameter Value Motor power 1.5 kW Speed 2950 rpm Extraction capacity 2530 m³/h Inlet diameter 130 mm / 2 × 100 mm Outlet diameter 120 mm Voltage / Frequency 400 V / 50 Hz Dimensions (L × W × H) 430 × 410 × 450 mm Weight 24 kg

Condition: new, functionality: fully functional, Year of construction: 2026, The FM300SN transport fan is a technologically advanced unit designed for extracting sawdust, wood chips, and wood dust in industrial environments. With a 2.2 kW motor and an airflow capacity of 3900 m³/h, the unit performs exceptionally well as a sawdust blower in dust extraction systems, ensuring effective air filtration and purification directly at the source of contamination. Its reliability, high performance, and compatibility with various woodworking machines make it an ideal choice for professional wood processing facilities. Key Advantages 2.2 kW motor – designed for intensive continuous operation High extraction capacity of 3900 m³/h – efficient removal of sawdust, chips, and dust Impeller speed 2950 rpm – optimal airflow with stable operation Universal suction ports – 1 × 150 mm and 3 × 100 mm for connecting multiple machines simultaneously Steel construction – resistant to mechanical damage and adapted for industrial conditions Design and Technology The FM300SN is based on a welded construction made of thick, powder-coated steel, ensuring resistance to impacts, vibration, and heavy-duty use. The aluminum impeller is mounted directly on the motor shaft, providing high efficiency and minimal energy loss. The fan is designed for three-phase 400 V / 50 Hz power supply, ensuring stable operation in industrial facilities without the risk of system overload. The suction port system (3 × 100 mm and 1 × 150 mm) allows multiple machines to be connected simultaneously or enables the use of reducers depending on the dust extraction system requirements. Precision and Performance The FM300SN stands out for its high efficiency in transporting sawdust and dust, even in heavily contaminated environments. Carefully optimized aerodynamic parameters ensure constant airflow, minimizing the risk of blockages within the system. As a result, the fan not only maintains a clean working environment but also extends the service life of connected machines by reducing their exposure to process dust. Applications The FM300SN is designed for environments requiring highly efficient sawdust and chip extraction systems during woodworking operations. It is particularly recommended for: Dsdpfxovu Amko Aggjcl carpentry workshops furniture manufacturing plants production of solid wood panels and components central dust extraction systems in production halls Compatible with machines such as: planers and jointers thickness planers spindle moulders sliding table saws edge banders Standard Equipment powder-coated steel housing three-phase 400 V motor aluminum impeller with direct drive suction ports: 1 × 150 mm and 3 × 100 mm Optional Equipment flexible hoses Ø100 mm, Ø120 mm, Ø150 mm filter bags Technical Specifications Parameter Value Motor power 2.2 kW Speed 2950 rpm Extraction capacity 3900 m³/h Inlet diameter 150 mm / 3 × 100 mm Outlet diameter 120 mm Voltage / Frequency 400 V / 50 Hz Dimensions (L × W × H) 440 × 430 × 450 mm Weight 30 kg

Condition: new, Year of construction: 2026, CORMAK FAN5500 Material Handling Fan – High-Capacity Industrial Blower for Sawdust and Dust Extraction The CORMAK FAN5500 is a high-performance centrifugal material handling fan engineered for intensive industrial extraction of sawdust, wood chips, dust, and other dry particulate materials. Powered by a 5.5 kW three-phase motor and equipped with a high-efficiency centrifugal impeller, the FAN5500 delivers an impressive airflow of up to 8,000 m³/h, making it an ideal solution for woodworking factories, furniture production facilities, and centralized dust collection systems. Key Advantages Airflow up to 8,000 m³/h – ideal for multi-machine installations and production lines Dcedpfx Aevughljggol Powerful 5.5 kW motor – ensures reliable performance under continuous heavy-duty operation Large connection ports – Ø300 mm inlet and Ø250 mm outlet for compatibility with various extraction systems Compact yet robust construction – excellent vibration resistance and long service life 400 V three-phase power supply – designed for industrial installations Construction and Technology The FAN5500 features a high-efficiency centrifugal impeller driven directly by a powerful electric motor, minimizing power losses while maximizing airflow. Its heavy-gauge steel housing is powder-coated for superior resistance to corrosion, abrasion, and mechanical damage. The aerodynamic design optimizes air movement while reducing energy consumption. Despite its high performance, the compact footprint allows easy installation where space is limited. Performance and Efficiency The CORMAK FAN5500 efficiently extracts large volumes of sawdust and airborne particles from multiple workstations simultaneously. Maintaining continuous high airflow helps prevent duct blockages, extends the service life of machinery and filtration systems, and significantly improves workplace cleanliness. Effective dust extraction also enhances operator safety by reducing airborne dust concentration and minimizing fire hazards. Applications The FAN5500 is ideally suited for: Woodworking and furniture manufacturing facilities Workshops processing solid wood, MDF, plywood, and engineered wood products Centralized industrial dust collection systems CNC routers, panel saws, spindle moulders, planers, and sanding machines Pneumatic conveying systems for dry wood waste Standard Equipment 5.5 kW / 400 V three-phase electric motor Heavy-duty steel centrifugal impeller Powder-coated steel housing Ø300 mm inlet connection Ø250 mm outlet connection Heavy-duty support frame Optional Equipment Wear-resistant flexible extraction hoses Cyclone separators Automatic start/stop control systems Extraction arms, adapters, and duct reducers Technical Specifications Parameter Value Maximum Airflow 8,000 m³/h Inlet Diameter 300 mm Outlet Diameter 250 mm Motor Speed 2850 rpm Motor Power 5.5 kW Power Supply 400 V Dimensions (L × W × H) 670 × 600 × 600 mm Weight 55 kg

Condition: new, Year of construction: 2026, CORMAK FAN2200 Material Handling Fan – High-Performance Industrial Blower for Sawdust and Dust Extraction The CORMAK FAN2200 is a high-performance industrial material handling fan designed for efficient extraction of sawdust, wood chips, dust, and other airborne particles generated during the processing of wood, engineered wood products, plastics, and composite materials. Equipped with a 2.2 kW three-phase motor and a high-efficiency centrifugal impeller, it delivers an airflow of up to 4,000 m³/h, providing reliable support for industrial dust extraction systems while maintaining a clean and safe working environment. Key Advantages Airflow up to 4,000 m³/h for efficient transport of dust and wood waste 2.2 kW / 400 V motor designed for continuous industrial operation 2850 RPM operating speed ensures powerful and consistent airflow Large connection diameters – Ø200 mm inlet and Ø180 mm outlet Compact dimensions (575 × 550 × 500 mm) suitable for stationary and mobile installations Heavy-duty steel construction built for demanding workshop and industrial environments Construction and Technology The FAN2200 features a direct-drive centrifugal impeller mounted directly on the motor shaft, reducing power losses while improving reliability and efficiency. The dynamically balanced impeller minimizes vibration and operating noise, ensuring smooth, trouble-free performance. The powder-coated steel housing offers excellent resistance to wear, corrosion, and mechanical damage. The fan can be used as part of a centralized dust extraction system or as a dedicated extraction unit for individual machines. Performance and Efficiency With an airflow of 4,000 m³/h, the CORMAK FAN2200 effectively removes fine dust as well as heavier wood chips generated by thickness planers, spindle moulders, panel saws, and CNC machines. Designed for continuous-duty operation, it maintains stable suction performance even in high-dust environments, helping to extend filter life, reduce machine wear, and improve overall air quality in the workplace. Applications The CORMAK FAN2200 is ideal for: Woodworking and furniture manufacturing facilities CNC machining workshops Plastic processing plants Centralized dust collection systems Industrial production lines generating high volumes of dust and chips Its flexible connection options also allow the FAN2200 to operate as either a standalone extraction fan or as part of a larger pneumatic conveying system. Standard Equipment 2.2 kW / 400 V three-phase electric motor Direct-drive centrifugal impeller Powder-coated steel housing Ø200 mm inlet connection Ø180 mm outlet connection Optional Equipment Flexible suction and discharge hoses (Ø180–200 mm) Adapters and duct reducers Dsdpfx Aovugg Usggjcl Textile or bag filtration systems Timer controls and remote start systems Technical Specifications Parameter Value Maximum Airflow 4,000 m³/h Inlet Diameter 200 mm Outlet Diameter 180 mm Motor Speed 2850 rpm Motor Power 2.2 kW Power Supply 400 V Dimensions (L × W × H) 575 × 550 × 500 mm Weight 35.5 kg

Condition: new, Year of construction: 2026, The most powerful centrifugal fan, the FAN5.5, achieves a capacity of up to 7419 m3/h. The design of the new technology line has enabled us to develop the LineWind metal turbine system. This is the most important feature of the radial fans, enabling them to extract all sorts of pollutants with increased vacuum power, thanks to a special blade system that has been profiled at an appropriate angle. The Radial Ventilator can transport air chips sawdust dust and other substances such as smoke or harmless gases. Thanks to its construction and reinforced balanced impeller with many blades, it guarantees stable, quiet and vibration-free operation. The high efficiency of the fan due to the suitable shape of the blades significantly reduces the consumption of electricity without changing its high performance. APPLICATION OF THE FAN production of various types of materials transport to dehumidifiers and drying systems. carpentry - transport of shavings, sawdust, dust agricultural industry - transport of fine granulates, manufacturing - transport of polystyrene granulates, etc. automotive industry - transport of dusty air, impurities Technical parameters: Dcsdevugh Eepfx Aggjl MAX. AIR CAPACITY max. 7419 m3/h inlet diameter 300 mm discharge diameter 250 mm PRESSURE 2014 - 1320 Pa DIMENSIONS 750x750x830 mm MOTOR POWER / VOLTAGE 5.5kW WEIGHT 110kg