Used Foseco Impeller for sale (279)

Condition: good (used), APV Centrifugal Pump Type W 60/300 Manufacturer: APV, Horsens, Denmark Material: Acid-proof stainless steel (AISI 316L) Motor: 37 kW, 380 V, 2950 RPM Design: Sanitary high-speed centrifugal pump with open impeller Condition: Used, in good mechanical condition Gsdpfstk Hx Ejx An Ijug Estimated capacity: approx. 45 – 60 m³/h (depending on product and pressure head) Pressure head: up to approx. 70 – 90 m Application: Designed for high-pressure applications in the dairy, food, and beverage industries, such as CIP supply, pasteurizers, evaporators, and process lines. Location: Denmark Price: On request / EXW Denmark 2 identical units available.

Condition: used, Year of construction: 2019, operating hours: 3,394 h, empty load weight: 4,000 kg, Operating hours: 3,394, First registration: 16/09/2019 Driving speed: 40 km/h - 4,000 kg gross vehicle weight Cab: Sound-insulated, low-vibration cab with entry on right or left, right-hand drive, air-suspended driver's seat, passenger seat, rotating beacon, reverse warning buzzer, engine RPM gauge, heater with 2-speed fan, heated windshield with 2-speed intermittent wiper system, radio/SD, work lights, seat belts for driver and passenger. Floor panels with metal grating, CAN View System with 7" color display showing all relevant data with integrated self-diagnosis system. Engine: VM engine D754 E6 (60D/14), 2,970 cm³, 4 cylinder, 62 kW @ 2,300 rpm, 270 Nm @ 1,350 rpm, Common Rail. Exhaust system: DPF & DOC with SCR urea system, AdBlue tank 15 l Suspension: Fully suspended with coil springs and shock absorbers front and rear. Tires: front 6.50 R10 / rear 225/75 R10 Brakes: Hydraulic dual-circuit brake plus hydrostatic rear brake, hydraulically operated parking brake. Sweeper container: Container made of DIN 1.4003 stainless steel, tipping height 1.50 m, tipping angle 45°. High-performance blower with a wear-resistant, self-cleaning impeller. Discharge chute on the container 200 mm. Brush: 850 mm front brush (poly) with hydraulic drive, adjustable up to 120 rpm, 1,440 mm sweeping width per side, brush contact pressure and lateral swing angle independently adjustable via joystick, front and side collision protection. Suction duct: Continuously adjustable lifting and lowering suction duct on rigid wheels. Water tank: Fresh water tank with 152 l and water recovery tank with 250 l. Paint: Cab, side and rear covers, single-color white; chassis, fresh water tanks and container in grey. Toolkit includes grease gun, combination wrench, screwdriver set. Special equipment: - Right-hand drive (standard) - All-wheel steering - Wall-to-wall turning circle 4,600 mm - Air-conditioning with automatic climate control - Deluxe driver’s seat, heated with lumbar support - Upgraded radio with Bluetooth - Hands-free phone kit - Blind spot mirror - Heated left/right rearview mirrors - Rear-view camera system with integrated color monitor - Automatic central lubrication system (Interlube) Gujdpfxstuzqpo An Ijg - Folding LED rotating beacon (instead of standard) - Airport rotating beacon, strobe lights (CAA specifications CAP 168) - Optional mounting for 3rd brush available - Mounting plate & high-level work lights oriented to the right Location: 54595 Prüm

Condition: used, functionality: fully functional, machine/vehicle number: 30044, mileage: 41,900 km, power: 170 kW (231.14 HP), first registration: 11/2020, overall weight: 15,000 kg, fuel type: diesel, color: orange, axle configuration: 4x2, fuel: diesel, wheelbase: 3,560 mm, driver cabin: day cab, gearing type: mechanical, emission class: euro6d, suspension: steel-air, loading space volume: 7 m³, Equipment: ABS, air conditioning, airbag, central locking, cruise control, differential lock, electronic stability program (ESP), immobilizer system, traction control, truck registration, The mileage of the offered vehicles may vary, as some vehicles are currently in rental use! Further comparable vehicles are available upon request. Right-hand drive, 4-cylinder engine OM 934, ABS, ASR, ESP, disc brakes, engine brake, reinforced frame, front axle 5.3 t, rear axle 11 t air-suspended with differential lock, lane keeping assist, active brake assist, hill start assist, underrun protection, reversing warning, daytime running lights, rain sensor, light sensor, plastic toolbox, cab with 2 seats, driver comfort seat, fixed passenger seat, roof hatch, air conditioning, pollen filter, electric windows, electrically adjustable and heated mirrors, radio-CD with Bluetooth, speed limiter, central locking with remote control, immobilizer with transponder, OBU preparation, cruise control, digital tachograph, sun visor, reversing camera. Hydrostatic drive, sweeping speed 0-14 km/h, turbine with stepless adjustment, container made entirely of stainless steel, additional manual pump for lifting the tank, weight indicator, operating hour counter, sweeping hour counter, and water indicator (remaining volume 300 l). Automatic shut-off of water supply when lifting the sweeping unit and also when engaging reverse gear, acoustic signal in the cab when the tank is raised, 2 LED rotating beacons + 2 LED work lights, sound insulation in the unit compartment, right/left sweeping unit, collecting on both sides, dual sweeping system (can sweep on both sides simultaneously), sweeping working width: 2300 mm / with dual sweeping system: 3940 mm, push-type disc brushes with steel bristles, diameter 700 mm, disc brush inclination adjustable (joystick on the right and left), roller brush made of mixed polypropylene and steel wire bristles, L=1500 mm, diameter 400 mm, spray nozzles for disc brush, continuous spray bar at the front with 6 spray nozzles, 3 spray nozzles on each disc brush, 6 spray nozzles in the suction nozzle, 5 spray nozzles on the sweeping roller, water system for cleaning the upper suction shaft with external water connection, leaf grid made of stainless steel, area approx. 2 m², lifting and lowering pneumatically with vibration mechanism, turbine impeller made of Hardox 700, 8 mm thick, casing vault made of Hardox 500, 5 mm thick, water nozzles for internal cleaning of the turbine, water tank 2000 liters made of stainless steel AISI 316 integrated into the superstructure, filling via hose with backflow protection, water pump Wilden, P1, diaphragm pump, dry-running protection, leaf suction system at the rear, reversing camera with monitor in the cab, PM 10, holder for broom and shovel, cable remote control. Gedpfx Anszi U Rys Ijug

Condition: new, Year of construction: 2026, MDC750 Metal Dust and Chip Extractor – 230V is a high-performance extraction unit designed for metalworking stations where effective removal of contaminants such as metal chips, filings, and dust is essential. Thanks to its compact design, durable motor, and high extraction efficiency, it is a reliable solution for professional metalworking workshops, production plants, and workstations equipped with belt, bench, and disc grinders. This metal extraction system provides a clean and safe working environment while maintaining stable extraction performance. Main advantages of the machine High extraction efficiency – airflow capacity up to 1800 m³/h without a bag, ensuring effective removal of even fine metal dust and filings. Compact design – a stable, well-balanced housing allows operation in limited workshop spaces. Quick access to the collection container – simplifies regular emptying and reduces downtime. Easy filter replacement – minimizes maintenance time. Suitable for various machines – an ideal metal chip extractor and grinder dust extraction system for small and medium-sized workshops. Design and technology The MDC750 has been designed for intensive operation in industrial environments. The construction is based on a durable steel housing and an efficient filtration system that effectively separates metal dust and chips. The suction unit is powered by a 0.75 kW motor, providing appropriate airflow parameters. The 350 mm diameter impeller generates stable suction pressure, allowing efficient removal of even heavier metal particles. The machine is equipped with a 1 × 100 mm suction port, making it compatible with the most common metalworking stations. The large collection container ensures long operating periods without frequent emptying. Precision and work efficiency The applied design solutions ensure constant performance during both metal chip extraction and fine dust removal. The extraction capacity of 1520 m³/h with a bag allows efficient operation of both single and multiple workstations. The compact dimensions make the unit easy to relocate and integrate into existing workshop layouts. Applications The MDC750 metal extractor is designed for professional applications, especially: bench, belt, and disc grinding stations, small and medium-sized metalworking workshops, metal component preparation and finishing stations, processes requiring effective removal of metal chips and dust. Standard equipment Basic filter Chip and metal filing collection container 100 mm suction port Set of mounting components and consumable elements Guodpfx Aoztn Sfen Ijg Technical specifications Parameter Value Motor power 0.75 kW Voltage 230V / 50 Hz Suction ports 1 × 100 mm Extraction capacity without bag 1800 m³/h Extraction capacity with bag 1520 m³/h Impeller diameter 350 mm Dimensions 870 × 560 × 1170 mm Weight 31 kg

Condition: new, Year of construction: 2026, MDC1500/400 Metal Chip Extractor The MDC1500/400 metal chip extractor is an industrial machine designed for intensive use at grinding and welding stations, as well as wherever effective removal of metal chips and dust is required. This model provides high extraction performance, stable airflow and filtration adapted to the demanding conditions typical of metal production and processing. Key Advantages Two-stage filtration – quick, tool-free replacement of the two filter cartridges improves chip separation efficiency. High extraction performance – up to 2,200 m³/h without a bag, ensuring stable operation even when handling large quantities of metal chips. Mobile design – the compact wheeled housing makes it easy to move the unit between workstations. Large collection container – extends operating time without the need for frequent emptying. Dual suction inlet, 2 × 100 mm – allows two machines to be connected simultaneously. Design and Technology Gujdpevuq Amjfx An Ijg The MDC1500/400 is equipped with a high-performance motor operating at S1 100%: 1.5 kW and S6 40%: 2.1 kW, ensuring stable extraction performance even during extended operation. The 400 V / 50 Hz power supply provides reliable operation and consistent impeller performance. The dual-inlet system, 2 × 100 mm, enables efficient extraction from two sources. The optimised suction system design allows an airflow rate of up to 2,200 m³/h without a bag. When operating with a bag or hose, the extraction capacity is 1,500 m³/h, which is still fully sufficient for workstations generating large quantities of metal dust and chips. Precision and Performance The MDC1500/400 metal chip extractor has been developed to maintain a stable, linear airflow. Its robust housing minimises vibrations, while the precisely designed filtration system ensures optimal capture of dust generated during grinding, deburring and welding. As a result, the unit effectively helps keep the workstation clean and improves the working conditions for the operator. Applications The MDC1500/400 is a versatile, professional extraction unit for grinders and machining workstations operating in continuous-duty conditions. It is ideally suited for: grinding tables, welding tables, bench, belt and disc grinders, manual and mechanical processing workstations where metal chips and swarf are generated. Standard Equipment two filter cartridges, large container for metal chips and swarf, compact and mobile housing, dual suction inlet, 2 × 100 mm. Technical Data Parameter Specification Motor S1 100%: 1.5 kW; S6 40%: 2.1 kW Voltage 400 V / 50 Hz Suction inlets 2 × 100 mm Extraction capacity without bag 2,200 m³/h Extraction capacity with bag/hose 1,500 m³/h Dimensions 850 × 670 × 765 mm Weight 72 kg

Year of construction: 1991, condition: used, For sale is a propeller mixer from Geppert Rührtechnik. It is the SPF 4 /1.1 model. Year of manufacture: 1991. Mixer data: RPM: 1400 V: 220 - 380 kW: 1.1 Shaft length: 1010mm Impeller diameter: 180mm Gujdpfxega D Ers An Iog Connection: DN80

Condition: used, For sale is a propeller agitator from Erwin Stelzer Warburg. It is model 8M 63G.D2. Data for the agitator: RPM: 225 Godpfxsga I T Ie An Ioug V: 220 / 380 kW: 1.5 Shaft length: 500mm Impeller diameter: 240mm Connection: DN200 Further information can be found on the nameplate.

Condition: ready for operation (used), 11x DRK 26 H mixers from Erwin Stelzer Warburg, equipped with emergency stop switches. 8x with propeller, 3x without propeller. Product specifications: 1 kW 220/380 V 5.9/3.4 amps 920 rpm 2.7 hp 0.64 cos φ Insulation class E Shaft length 400 mm Shaft diameter 30 mm Overall length 800 mm Gsdpfxofr Ianj An Ieug Impeller diameter 240 mm Connection: DN125

Condition: used, For sale are eight propeller mixers from Erwin Stelzer Warburg. These are model DRH 64. The condition ranges from good to heavily used. RPM: 1450 V: 220/380 kW: 7.5 Shaft length: 740mm Impeller diameter: 320mm Gedpfxsga Dv Hs An Isug Connection: DN250

Condition: used, For sale is a propeller agitator from Erwin Stelzer Warburg. It is the DRX3204D model. Gjdpfxsga I Sxs An Isug Agitator data: RPM: 1435 V: 220 / 380 kW: 2.2 Shaft length: 500mm Impeller diameter: 280mm Connection: DN250 Further information can be found on the nameplate.

Condition: ready for operation (used), For sale is the propeller agitator DRK8P6/12D from Erwin Stelzer Warburg. Product data: 18/4 kW 380V 34.2/10.8 A 980/480 RPM Shaft length 780mm Impeller diameter 420mm 0.92/0.68 cos IP 44 50 Hz Gedpfx Asfr Ifden Isug Operating mode S1 Insulation class E Nameplate (photo)

Condition: used, For sale is a guide vane stirrer from VEM Motors GmbH. It is the VDE 0530 T1/7.91 model. Godpfxsga D Ifo An Ieug Stirrer specifications: RPM: 1475 V: 380 kW: 20 Shaft length: 800mm Shaft diameter: 95mm Overall length: 2030mm Impeller diameter: 450mm Connection: DN400

Condition: good (used), For sale is a shaft mixer from Stelzer Rührwerke International GmbH. It is the SM460-DF model. Product data: 1455 RPM 400V 18.5 kW Shaft length 720mm Impeller diameter 280mm Further data can be found on the nameplate (photo). Gjdpefr Icusfx An Ijug

Condition: used, Year of construction: 1993, Technical details: motor capacity: 7,5 kW revolution per minute: 2860 U/min Gjdpfsu Nu Exex An Ijug extraction suction socket - diameter: 200 mm electrics - voltage/frequency: 380 V/Hz weight of the machine approx.: 235 kg dimension machine xH: 1,0x1,0x1,65 m Dust Suction Device - impeller Dm = 600x160mm - impeller = 360mm Intake: - intake conical dia = 250x200x200mm - collar dia = 250mm Exhaust opening: - dia = 250mm; Collar dia = 310mm Accessories: - 3x wall clamps dia = 140mm - 90 ° arc dia = 250x600mm - 1x spare belts 15x1500mm *

Condition: good (used), functionality: fully functional, Year of construction: 2018, Duplex Inox KUGELMANN MOUNTED SPREADER DUPLEX 1.8 m³ STAINLESS STEEL made of V2A stainless steel Container volume 1.8 m³ - 2 screw conveyors - Spreader with spreading disc, 8 m spreading width (rustproof) - K-Tronic 2 control system with flying cable harness - Wet salt systems (technical data see below *) - For moistening in the impeller of the spreading disc Godpfxjzf E Dvo An Ijug - Automatic dry material reduction - 2 side salt tanks and 1 center tank - Tank capacity approx. 820 liters - Stainless steel spreading disc, 8 m spreading width - Screw couplings - Cable separation - Folding roof - All-round beacon, halogen - PVC skirt - Work light - Volumetric meter or weight meter of the control system as - Spreading control - Sign "Winter service" - Drive via vehicle hydraulics * Wet salt system mounted on the spreader Wet salt system suitable for the above-mentioned spreader, driven by a hydraulically operated gear pump in a separate closed control circuit (with feedback) for maximum dosing accuracy, even with low application rates, stepless and percentage- accurate dosing, capacity, as described above, 820 liters Standard equipment: - Salt tanks on both outer sides, as well as under the container between the spreader compartments - Level indicator or conveying control - Connection for filling - Hydraulically operated gear pump for dosing - Filter unit - Brine distributor - Control system k-tronic 2 - Paint finish RAL 2011 - municipal orange - Access ladder - Electrical spreading control - Electrical spreading pattern adjustment - Mounting kit according to agreement and vehicle Advantages of KUGELMANN mounted spreaders: - Kugelmann screws always have 3 pitches (patented) - The screws can be run in reverse with the push of a button, so that solid objects can be quickly and easily loosened (patented) - Daily application counter standard - Extremely low construction and extremely low center of gravity, resulting in significantly better vehicle handling and loading of spreading material as well as visibility to the rear - Control systems are always interchangeable (data is stored on the slave) - High level of in-house production - High-pressure resistant hydraulic motors, even with full pressure in the return line, no seals are damaged! (Can occur due to incorrect connection of the hydraulic lines.) Subject to change, printing errors, and prior sale. All information is provided without guarantee. The sale takes place with the exclusion of any warranty.

Condition: excellent (used), functionality: fully functional, power: 110.32 kW (149.99 HP), first registration: 11/2021, fuel type: diesel, fuel: diesel, driver cabin: day cab, operating hours: 172 h, Equipment: air conditioning, all wheel drive, car registration, 1352T BOKI MUNICIPAL VEHICLE 1352T Length x Width x Height – 5,070 x 1,700 x 2,190 mm (excl. mirrors) Wheelbase 2,400 mm / 990 mm Tank volume: Diesel 50 liters, AdBlue 25 liters, hydraulic oil 50 liters Additional equipment affects unladen weight, payload, and dimensions Engine FPT F1C 1152, EU 6C, 110kW (standard) FPT, type F1C, 2,998 cm³, 4-cylinder diesel engine 110 kW / 150 HP at 3,000 rpm. Torque: 370 Nm at 1,320 rpm. Emission standard Euro 6C (Stage V in vehicle documents) Steering (standard) Hydraulically steered front axle with up to 40° steering angle Left-hand drive Third axle forced steering and can be lifted Hydraulic Load-Sensing 2-circuit system Load-Sensing variable displacement pump with 2 hydraulic circuits (LUDV) Independently switchable electrically Proportional adjustment Nominal flow rate: max. 80 l/min per circuit Total flow rate: 135 l/min at 3000 1/min, max. 200 or 300 bar, manually switchable Two pressure and tank lines at the front and rear, including return flow filter With drip-free flat-face quick couplings Including leak oil line at the front and rear With separate filtration Including 2 oil flow regulators Floating position for double-acting control valve Floating position for 1 double-acting control valve at the front Double-acting control valve at the front 1 double-acting valve with 2 drip-free flat-face quick couplings at the front Operation via buttons on the joystick Air conditioning Air conditioning integrated into the vehicle's heating and ventilation system Vehicle height remains unchanged Control panel holder Control panel holder for spreader control unit Exterior mirrors adjustable and heated Electrically adjustable and heated exterior mirrors Accelerated lifting and lowering, fixed mounting plate Accelerates the lifting and lowering of attachments with their own hydraulic system Used with attachments with a high flow rate at the control function. Only in combination with: FPT engine, LS hydraulics, fixed mounting plate DIN 76060-B Rear connections offset for roll-off systems Hydraulic connections on the bulkhead placed to the outside, to allow collision-free mounting of roll-off systems Preparation for tipper cylinder Preparation of the vehicle for the later installation of a tipper cylinder, Electrical connections prepared, hydraulic connection prepared With the following additional equipment: Central lubrication system vehicle Consisting of the required lubricant distributors, Connection fittings at the lubrication points and the Distributors, as well as the lubricant lines: Front axle 10 lubrication points Rear axle 14 lubrication points Total 24 lubrication points Gjdpfx Anozf Eh Ue Ioug ILC MINI MAX 12V 1.0 kg R, CT, PE Stirring impeller Control with: Operating pressure: 200 bar Speed: 22 rpm Container: 1.0 kg Grease follower lid: No Stirring impeller: Yes Low level indicator: No Outlet/number: G1/4" / 2; M10x1.8" Pump element with: Cable: Yes Clamping: Bayonet 7-pin Voltage: 12 V Connection: M12x1 IP67 Without attachments. Suitable attachments can be purchased separately: Vario snowplow HUMMEL LF-D 2700 - €7,500.00 net Roll-off tipper AR-L55-2 new - €17,500.00 net Spreader or wet salt spreader available at an additional price. Subject to changes, printing errors, mistakes, and prior sale. All information is provided without warranty. The sale takes place with the exclusion of any guarantee or warranty.

Condition: new, Wilo Glanded pump IPN50/180-7,5/2 AT, DN50 PN 16, Art. 307833 /2120882 Wilo Glanded pump IPN50/180-7,5/2 AT, DN50 PN 16, 7,5kW max 140 degrees 2900 rpm art. 307833 /2120882 below mentioned data are identical in construction with our predecessor Ordering information Make: Wilo Product designation: CronoLine-IL 50/180-7,5/2 net weight approx. m: 106 kg Order number: 2120882 Gusdpfx Aoivdz Njn Ieg Operating data: Pumped liquid: Water Medium temperature T: -20 °C Ambient temperature T: -15 °C Maximum operating pressure PN: 16 bar Design pressure: 16 bar up to 120°C, 13 bar up to 140°C Minimum efficiency index (MEI): 0.4 Hydraulic data: Minimum efficiency index (MEI): 0.4 Max. Working pressure p: 16 bar Max. operating pressure PN: 16 bar Min. media temperature Tmin: -20 °C Max. media temperature Media temperature Tmax: 140 °C Max. Ambient temperature Tmax: 40 °C Design information: 16 bar up to 120°C, 13 bar up to 140°C Motor data: Mains connection : 3~400 V, 50 Hz Voltage tolerance : ±10 Motor efficiency class : IE3 Motor rated power P2: 7,50 kW Rated current IN: 13,30 A Rated speed n: 2900 1/min Power factor cos φ: 0.90 Motor efficiency ηM 50%: 88.9 percentage Motor efficiency ηM 75%: 90.3 percentage Motor efficiency ηM 100%: 90.1 percentage Motor winding up to 3 kW: - Motor winding from 4 kW: - Insulation class: F Motor protection class: IP55 motor protection: no Materials: Pump housing: 5.1301/EN-GJL-250 KTL-coated Impeller: EN-GJL-200 (GG-20) cast iron Shaft: stainless steel Mechanical seal: AQ1EGG Lantern: 5.1301/EN-GJL-250 KTL-coated Condition: "New". Pumps from stock. Partly without original carton. May have dirt or storage marks/cl. dents. Unused they look at the holes. There are no fastening traces See pictures Shipping with special/package/shipping P4 More items - new and used - you will find in our store! International shipping costs on request!

Condition: excellent (used), Grundfos TPED 50-160 / 2-S AFA-BAQE APPLICATION AREAS - Heating systems - Local hot water supply systems - cooling and air conditioning systems FEATURES AND ADVANTAGES - Low power consumption - Correction according to the existing working conditions - Easy to install Technical data: Frequency of rotation 2900 rpm Nominal supply 17 m 3 / h Nominal head 12 m Max hydrostatic head 160 dm Shaft seal BAQE liquids: Working fluid water Fluid temperature range 0 ... 120 ° C temperament. Liquids 20 ° C density 998,2 kg / m 3 materials: Pump housing cast iron EN-JL1040 ASTM A48-40 B Impeller cast iron EN-JL1030 ASTM A48-30 B Electrical data: Motor type 80B Number of poles 2 Nominal power - P2 2 x 1.1 kW Industrial frequency 50 Hz Nominal voltage 3 x 380-500 V Rated current 2.15-1.80 A Cos is a force characteristic 0.91-0.82 Nominal speed 360-4000 rpm Energy efficiency 88.5% Protection class (IEC 34-5) IP55 Insulation class (IEC 85) F Motor protection Yes. Engine number 98362352 assembly: Maximum ambient temperature 50 ° C Max. working pressure 16 bar Max. Pressure at a given temperature 16 bar / 120 ° C Standard flange DIN Connection code F Pipe connection DN 50 Permissible pressure PN 16 Gsdpfx Aefuappsn Isug Mounting length 340 mm mm Motor flange size FF165 Net weight 95 kg

Condition: used, Year of construction: 2014, Manufacturer : Alliance Inox Industrie Type: Vertical cylindrical stirred tank Year : 2014 Gjdeyvv A Tspfx An Isug Useful capacity: 3,000 litres Material : 304 L stainless steel Operating temperature: 20 to 60°C Agitation: 2 three-bladed impellers, 100 rpm Engine power: 10 kW ATEX class: Ex zone II T3 ext   Jacketed : 837 L Pressure: 1.5 bar Heating: 2 x 4.5 kW immersion heaters PT100 temperature sensor: inside the tank Sonde de température PT100 : Jacket   Empty weight : 2000 kg Dimension : Ø 1563 x 4831 mm Central drain DN63   Motor checked and tested prior to sale. Drawing available on request

Condition: used, Manufacturer : Vatron MAU Guodpfx Anex Rz Nho Iog Agitation: Rayneri Typhoon impeller diameter Ø400 / 3 kw / 323 rpm - Polished stainless steel, thickness 6 mm - Diameter. 2000 mm - Double insulation jacket 30 mm / stainless steel sheet 3 mm - Washing turbine - AC & vacuum connections

Condition: used, Year of construction: 1998, functionality: fully functional, On offer: BIESSE ROVER 20 CNC machining center – 3 axes, working area 2893 × 950 mm. The machine is used, has undergone a comprehensive technical inspection and extensive service work, and is fully functional and ready for operation. It can be started and thoroughly inspected at our company's premises before purchase. The machine's greatest advantage is its extensive machining capabilities and the modernization of the electrical system and CNC control. The center features an ISO 30 electrospindle, a 10 + 6 spindle drilling head, and a saw unit, enabling milling, drilling, grooving, pocketing, and contour machining. Specifications: • Manufacturer: BIESSE • Model: ROVER 20 • Year of manufacture: 1998 • Number of axes: 3 • Working area X × Y: 2893 × 950 mm • 6 adjustable, pneumatically locking work beams • 12 vacuum cups • Pneumatic front and side stops • Main electrospindle: 3.6 kW, ISO 30 • Saw unit • Drilling head: 10 vertical + 6 horizontal spindles • New X/Y/Z axis servo drives: 3 × 1.0 kW • Vacuum pump: 3.0 kW • CNC controller: ESP32 • System: grblHAL / OpenBuilds CONTROL • Computer connection: USB • Dust extraction port: Ø200 mm • Total power: 9.6 kW • Overall dimensions: approx. 380 × 155 × 205 cm Service work performed: • Replacement of electrospindle bearings • Vacuum pump inspection and impeller replacement • Inspection of the pneumatic system and leak removal • Installation of 3 new X/Y/Z axis servo drives • New electrical system and CNC control installation Gujdpfx Ajzucbqjn Iog Application: • Production of furniture, fronts, doors, and interior design elements • Machining of MDF, plywood, and furniture boards • Milling and contour machining • Vertical and horizontal drilling • Grooving and pocketing Additional information: • The machine does not require a dedicated computer – control is possible via a computer through USB • Currently operating on ESP32 with grblHAL and OpenBuilds CONTROL • It is possible to use a different CNC system, e.g., PikoCNC or UCCNC • Upon request, we can configure another system – the estimated cost of work is approximately PLN 4,000 + license, controller, and any components • Manufacturer's documentation in Italian • The photos show the actual condition of the machine offered • Free machine operation training at our company's premises • The price quoted in the auction applies to export/WDT sales with a VAT rate of 0%; in the case of domestic sales, 23% VAT will be added Financing and transport: • We organize transport using the MDD fleet or through external carriers • We assist in obtaining leasing or a leasing loan • The delivery cost depends on the destination and the method of machine transport.

Condition: used, Year of construction: 1998, mileage: 1 km, first registration: 01/1998, driver cabin: other, gearing type: other, Vehicle location: Bovenden, Superstructure: for Unimog with accessories, sweeping material container made of stainless steel, approx. 4000 liters, radial fan, power consumption: 25 kW, impeller diameter: 700 mm, volume flow: 2.2 m³/h, total pressure increase: 0.13 bar, negative pressure in the container: 1060 mm WS, sweeping unit: 1 plate brush 400 mm, 1 roller brush 400 mm, hydraulically driven, suction unit: self-cleaning suction nozzle, irrigation system: spray water tank, stainless steel, approx. 750 liters, hydrant connection with free water inlet, attachment device Leistikow type ABG 303, for PTO (Unimog), universal joint, weight approx. 350 kg, spray bar LSB5, width: 2260 mm, swivel range 2 x 30°, max. permissible pressure 150 bar, weight of spray bar approx. 60 kg, 12 nozzles, HD pump KL40, ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Gusdpfx Ansi Rpgbe Isg

Condition: used, mileage: 86,996 km, power: 338 kW (459.55 HP), first registration: 12/2003, overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 4x4, maximum load weight: 6,000 kg, empty load weight: 12,000 kg, tire size: 340/80 R18, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel, number of seats: 2, Equipment: additional headlights, all wheel drive, cabin, differential lock, hydraulics, Vehicle location: Bovenden, short cab, rear window, switch 12, differential lock, work light, rotating beacon, leaf spring suspension, winter service equipment. Superstructure: Clearing width: approx. 2.75 m, height of the "thrower hood": approx. 1.5 m, impeller diameter: approx. 1.15 m, impeller drums can be pivoted hydraulically to the side, drive via a central universal joint, the left impeller can be engaged separately and manually. All-wheel drive (4x4) with all-wheel steering / crab steering, driving mode mechanical or hydrostatic, 3-point front hydraulics (approx. 7 tons lifting capacity), rear steering axle by Paul. Guodpfx Answ Spcds Ieg MAN VIN before modification: WMAT34ZZZYM292792. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, mileage: 1 km, first registration: 01/1998, driver cabin: other, gearing type: other, Year of construction: 1998, Vehicle location: Bovenden, Gsdpfx Anoi Rm U Ie Isug Superstructure: for Unimog with accessories, sweeping material container made of stainless steel, approx. 4000 liters, radial fan, power consumption: 25 kW, impeller diameter: 700 mm, volume flow: 2.2 m³/h, total pressure increase: 0.13 bar, negative pressure in the container: 1060 mm WS, sweeping unit: 1 plate brush 400 mm, 1 roller brush 400 mm, hydraulically driven, suction unit: self-cleaning suction nozzle, irrigation system: spray water tank, stainless steel, approx. 750 liters, hydrant connection with free water inlet, attachment device Leistikow type ABG 303, for PTO (Unimog), universal joint, weight approx. 350 kg, spray bar LSB5, width: 2260 mm, swivel range 2 x 30°, max. permissible pressure 150 bar, weight of spray bar approx. 60 kg, 12 nozzles, HD pump KL40, ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: new, For sale: new, unused KSB Etachrom B industrial pump – complete, in original packaging, with manufacturer’s documentation. The pump is designed for industrial and process applications – high-quality workmanship, made in Germany. Technical data (from the nameplate): Manufacturer: KSB Series / Type: Etachrom B Flow rate (Q): 18.0 m³/h Head (H): 45.0 m Gujdpfxsyhhqxs An Iog Impeller diameter: Ø 181 mm Rotational speed: 2904 rpm Operating pressure: PN10 Medium viscosity: 1.0 mm²/s Year of manufacture: 2023 Made in Germany Certifications: CE, EAC, UKCA Condition New – ex stock Never commissioned Original box Operating/installation manual included Condition exactly as pictured Applications Industrial installations Process systems Cooling, process water Technical and production installations