Used Gannomat Db 21 for sale (74)

Condition: used, Year of construction: 1998, Number of spindles in the hole row: 11 Number of horizontal spindles: 3 Knedpfoz I Ivdjx Adysc Pot-band drilling head: yes, Hettich Drill spacing: 32mm Power consumption: 2.2kW Drilling unit: swiveling

Condition: used, Year of construction: 2000, 220V, 1 phase, 50Hz Air connection: 6 bar Complete in standard design with: - Dowel feed via electronic vibratory feeder Knodpfx Aszktq Iedysc - Automatic dowel length and dowel diameter control - Fully automatic electronic control with program selector switch GLUING – APPLYING – INSERTING - 8-stage glue quantity selector switch via time pre-selection by electronic control - Closed glue system with 6 bar glue pressure via glue nozzle for glues with a viscosity of 150 to 350 mPas - Selector switch GLUE/WATER for rinsing the glue system - Control lamp for displaying the remaining glue quantity in the glue container - 1 stainless steel container for 5 kg of glue and - 1 stainless steel container for 5 liters of water for rinsing including 1 gun for dowels Ø mm, dowel length 25 - 50 mm, pre-set to 35 mm, insertion overhang 7 - 20 mm Location: Nattheim

Condition: new, Year of construction: 2026, Gannomat ProTec - CNC through-feed machine for drilling, grooving and routing Short introduction: • Small footprint requirement, less than 3,3 m2 • Large (1000 x 5600 x 60 mm) and small (60 x 250 x 6 mm) workpiece dimensions • Gentle workpiece handling by air jets • Precision through double laser measurement and workpiece straightening • Fast processing through 21/23 drilling spindles • 21/23 drilling spindles for zero setting times Knjdpfx Ajbiplrjdysc • Stable grooving unit till 8,3 mm saw blade width • Strong routing unit 5,5 kW (S1), option • Automatic tool changer for routing unit, option CNC controlled DRILLING, GROOVING, ROUTING below 3,3m2 with high processing precision and zero setup time, this stands for the GANNOMAT ProTec. TECHNOLOGY: The massive processing unit is equipped with 13 vertical drilling spindles, 8 double-horizontal drilling spindles (6Y & 2X), 1 grooving saw in the Y-axis with 1 routing unit. This unit placement allows that all conventional drill / tools are in one seting and only need to be called up. This CNC-controlled machining center operates from the bottom and can work in the through-feed and back-feed mode to the operator. Steel working tables with air jets are the reference for horizontal drilling and in the combination of the massive workpiece clamping system and additional 4th axis at the drilling head, precision drilling is possible. A non-contact laser sensor is used for recognition of the actual workpiece edges (Top and bottom edge), this allows a automatic correction / adjustment of the drilling program. USERS: ProTec offers Hightech in technology and application and was developed as a entry-CNC-level-machine for small and medium companies on the one hand and on the other hand as a second machine to a

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 1028 161, drilling depth: 75 mm, total width: 900 mm, total length: 1,200 mm, overall weight: 430 kg, spindle speed (max.): 2,800 rpm, drill spindle length: 800 mm, workpiece height (max.): 80 mm, number of spindles: 23, operating pressure: 6 bar, GANNOMAT COMBI 110 Dowel and multi-hole drilling machine including stops READY FOR USE Knodpfxezvm Hae Adyoc

Condition: new, Year of construction: 2026, Gannomat hinge boring and hardware insertion machines are hardware manufacturer independent and designed for the precise drilling and insertion of hardware. Robustness, durability and ease of use distinguish our universal hinge drill machines. Short introduction: • Independence from hardware distributors and manufacturers • Precision drilling unit with steel gears and steel clutch • Universal application: hinges, row of holes as well as line drilling, connectors and fittings, handle and through holes, holes for drawer slides, ... • Massive and stable tilt stops • Distance from the front stop to drilling spindles up to 300 mm (Basica Variabel) Knedpfx Aedx Axuedyoc

Condition: used, Used Machine Used Ganner Compact 30 In-Line Drilling Machine Features and Technical Specifications: 2 drilling beams, each with 15 spindles Pitch: 32 mm Drilling unit position adjustment: 0–650 mm Distance between drill hole rows: at least 190 mm Spindle speed: 2,800 rpm Motor power: 2 × 0.75 kW Kjdezk Nwdjpfx Adysnc Max. workpiece clamping height: 70 mm Working height: 850 mm Compressed air connection: 6 bar Availability: upon request Location: Flörsheim

Condition: used, Year of construction: 2000, Number of spindles in row: 11 Number of horizontal spindles: 3 Kodpexc Hi Uofx Adyenc Cup hinge boring head: yes, Blum Drill pitch: 32mm Power consumption: 2.2kW Drilling unit: swiveling

Condition: used, Used Machine Features and Technical Specifications: - Fully automatic pneumatic control with control panel - Clamping, drilling, and unclamping; electric intermittent operation - Drilling unit: Number of spindles, pitch 32 mm: 23 Speed: 2,800 rpm Motor power: 1.5 kW/380 V Drill chuck for tools with a 10 mm h6 x 20 shank and flat Adjustment range for position settings: 0–60 mm Drill hole depth for drills with a total length of 57 mm: 0–30 mm Drill hole depth for drills with a total length of 77 mm: 0–50 mm Drill hole depth for drill bits with a total length of 95 mm: 0–70 mm - Passage width: max. 800 mm Kedpfxszyy Dyj Adyjnc - Clamping height: max. 80 mm - Working height: 850 mm - Space requirement without stop ruler: 1200 x 900 mm - Compressed air connection: 6 bar - Sound level: less than 82 dB(A) - Weight: approx. 400 kg

Condition: used, Year of construction: 1985, Used Machine Kedjzk N Dwepfx Adysnc Year of Manufacture: 1985 Features and Technical Specifications: - For horizontal and vertical structural drilling - For vertical row drilling in a 32 mm grid - Vertical drilling unit with dual-spindle drill heads, freely positionable on an indexing shaft - 1.5 kW motor with 1,400 rpm - 1.5 kW motor with 2,800 rpm - Drill heads with pneumatic stroke - Pneumatic workpiece clamps - Passage width approx. 850 mm - Includes various stops and drill bits - Machine needs to be inspected/serviced. Basic functions are intact Availability: available shortly Location: 63934 Röllbach

Condition: used, used, good condition, low operating hours, with accessories with pneumatic lift for drilling on two levels Make: Ganner Model: Junior Motor: 1.5 kW Two-lever operation Table size 850 x 360 mm Drill chuck 20 mm Dowel drilling device with 24 positions Workpiece stop Central stop Pneumatic lift Kedpfx Adeythcrsyonc Pneumatic workpiece clamps, 2 pcs Space requirement approx. 300 x 1000 x 1300 mm Weight approx. 270 kg Storage location: 97447 Gerolzhofen, free loading, unpacked Delivery in current condition as inspected, function tested without overhaul, without guarantee or warranty

Condition: used, Year of construction: 1986, Second-hand machine Knodpfx Adszk N Ageyjc Year of manufacture: 1986 Features and technical specifications: - with 7-spindle row drilling head with positioning pins - Spacing 32 mm - with drilling head for BLUM hinges - with drilling head for Hettich hinges - with the corresponding press-fit dies - Motor 400 V, 0.75 kW, 2800 rpm - with stop bars Availability: at short notice Storage location: 63934 Röllbach

Condition: reconditioned (used), Year of construction: 1990, Motors 2x1.85A 50Hz 380V 2800 rpm Air operating pressure 6 bar 30 spindles D=10 mm mount Combination foot switch Knedpfx Aev Nptmodyec Emergency stop switch Main switch Manual height adjustment Manual side adjustment

Condition: new, Year of construction: 2026, functionality: fully functional, Gannomat Concept 70 Eco Body Press Year of manufacture: 2026 including the following options: - Rapid traverse speed, adjustable up to 50 mm/sec - Machine feet (working height 500mm) The Concept Eco and Concept Primus are ideal assembly aids for dowel joints in body pressing, as well as for drawer production. Brief description: • Proven tolerance compensation system (GANNOMAT system) • 2 potentiometers for steplessly adjustable pressing force • Minimum pressing force 300/500 daN (kg) for Concept Eco, or Minimum pressing force 600/800 daN (kg) for Concept Primus • Maximum pressing force 2200 daN (kg) for Concept Eco, or Maximum pressing force 3500 daN (kg) for Concept Primus • 3 pressing and traversing speeds 5 / 10 / 25 mm/sec (with fine positioning / creep speed) • Freely adjustable pressing time preselection with automatic opening function • Concept Eco: Simplest operation via 6 separate push buttons for 8 movement sequences • Concept Primus: Simplest operation via LCD display Universal application range: • Bodies, e.g. for furniture and cabinets • Mitered bodies Knsdpfxovxgrre Adysc • Bodies with an overhanging lid • Drawers • Pressing of multiple bodies / drawers Advantages: • Proven tolerance compensation system (GANNOMAT system) • Electromechanical body press with frequency-controlled geared motors • Independent vertical and horizontal pressing bars • High service life due to proven and high-quality components • Construction in a solid and robust design • Space-saving design • Body pressing = Simple + Fast + Efficient + Flexible + Precise + Professional • Simple operation via a simple and practical control panel • Fast pressing due to pressing bar positioning speed of up to 50 mm/sec (option) • Efficient due to precise pressing of various body sizes • Flexible due to adjustable parameters such as pressing force, pressing time, traversing speeds • Precise due to angle-accurate pressing of furniture bodies and drawers • Professional production of bodies and drawers with a modern body press

Condition: reconditioned (used), functionality: fully functional, Drilling and pressing machine for all types of furniture fittings, rows of holes and hole group drilling machine in system 32 Power connection 400V 0.75kW Spindle speed 2800 rpm Kedpfxsumw Sbe Adyjnc Stop ruler 960 mm 2x swivel stop for drills with shaft diameter 10 mm Workpiece thickness max. 40 mm 1x 7-spindle drilling head for row of holes, pitch 32 mm with integrated pins Manual feed Base at an additional cost Olive drilling head €450.00 Mepla drilling head with pressing die €550.00 Hettich drilling head with pressing die €550.00

Condition: new, Year of construction: 2026, Gannomat Concept 70 Eco Laminate – Body press with rapid traverse Technical data: Laminate body press from our showroom; Working area: width from 150 – 2,500 mm, height from 150 – 1,400 mm; depth 700 mm; - Laminate press beam at the top with 6 elements, laminate press beams on the side with 5 elements Knedpfxoiidm No Adysc - Laminate press beams with proven tolerance compensation for tight body joints - Counterpressure surfaces are 40 mm thick, coated, continuous support plates - The pressing force of the press beams is continuously adjusted electronically via 2 potentiometers and set via a frequency converter, therefore, the torque transmission is absolutely wear-free. - Pressing force for horizontal press beams min. 500 daN (kg) to continuously max. 2200 daN (kg) - Pressing force for vertical press beams min. 300 daN (kg) to continuously max. 2200 daN (kg) - Including option: Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams, pressing speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Tapping mode for precise positioning of the two press beams, e.g. for low pressing forces, drawers and bodies at 45 degrees. Simple operation via 6 separate push buttons, freely adjustable preselection of pressing time with automatic opening, loading height 300 mm The machine is in our showroom and can be delivered immediately. Location: in stock at 54634 Bitburg - immediately available -

Condition: excellent (used), Gannomat slot mortising machine / dowel drilling machine with Leroy-Somer motor - Motor type: LS80L2 - Power: 1.1 kW - Speed: 2810 rpm - Voltage: 220/380 V - Frequency: 50 Hz - Protection class: IP54 3-phase drive - Stable work table - Precision guide rails - Adjustable stops Kodpfsy Saw Hjx Adyonc - Robust metal construction - Ideal for series production and precise wood joints – with drill and cup cutter - Air pressure must be shut off manually

Condition: new, Year of construction: 2025, Advantages of Pre-glued Dowels • No additional glue required when inserting dowels • No cleaning required for the water supply system Advantages of the DübelJet • Recoil-free gun • Simple handling • Mobile handheld device • Universal application range Knjdpowu Dnnjfx Adyoc Technical Data of the DübelJet Dowel system and water supply system designed for pre-glued dowels • Dowel diameter: 8 mm • Dowel length: 35 mm (default setting, adjustable from 30 to 40 mm) • Dowel projection: 12 mm (default setting, adjustable from 7 to 20 mm) Universal application • Insertion of pre-glued dowels (with water), especially in furniture manufacturing • Insertion of positioning dowels (without water) made of wood or plastic, e.g., in frame construction or in combination with screws or cabinet connectors

Condition: new, Year of construction: 2026, Gannomat Concept 70 Eco Lamella – Carcase Press with Rapid Traverse Technical specifications: Lamella carcase press from our showroom; Working range: width from 150 to 2,500 mm, height from 150 to 1,400 mm, depth 700 mm; - Upper lamella pressing beam with 6 elements, side lamella pressing beam with 5 elements - Lamella pressing beams with field-proven tolerance compensation for tightly pressed carcase joints - Counter-pressure surfaces are continuous, coated support plates, 40 mm thick - The pressing force of the pressing beams is infinitely variable via two potentiometers and set electronically via frequency converter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressing beams: min. 500 daN (kg) up to infinitely adjustable 2,200 daN (kg) max. - Pressing force for vertical pressing beams: min. 300 daN (kg) up to infinitely adjustable 2,200 daN (kg) max. Kedoy Egz Sepfx Adyonc - Including option: Rapid traverse speed for quick positioning of the pressing beams, controlled by automatic workpiece detection with sensors in the pressing beams; pressing speed 5/10/25 mm/sec and rapid traverse speed 50 mm/sec. Sensors can be deactivated for pressing special parts. - Jog mode for precise positioning of both pressing beams, e.g., for low pressing forces, drawers, and carcases at 45 degrees. Easy operation via six separate push buttons, freely adjustable pressing time preselection with automatic opening feature, loading height 300 mm. The machine is available from our showroom and can be delivered immediately. Location: ex-stock 54634 Bitburg - available immediately -

Condition: as good as new (ex-display), Year of construction: 2026, - NEW - Manufacturer: Ganner Gannomat Type: SELEKTA 253 220 V, 1 phase, 50 Hz complete in standard version with: - Fully automatic electronic control with program selector switch COILING-GLUING-INSERTING - Dowel feed via electronic vibratory feeder with potentiometer for stepless adjustment of the dowel feed rate - Automatic dowel diameter and dowel length control with Auto-DL-Select system (automatic ejection of incorrect dowel lengths +/- 5 mm into the collection container) - Closed gluing system with 6 bar glue pressure via glue nozzle for glues with a viscosity of 150 to 350 mPas - Stepless electronic glue quantity adjustment with potentiometer via Kodpedwi Rkefx Adyenc time preselection through electronic control - Selector switch GLUE/WATER for flushing/cleaning the gluing system with EasyClean function button (automatic cleaning program for glue hose and glue nozzle via spray funnel and dirty water collection container) - Control light for glue residue level indicator in the glue container - 1 stainless steel container for 5 kg of glue and 1 stainless steel container for 5 l of water for flushing/cleaning - 4 rollers for moving the machine including 1 gun for dowels Ø 8 mm, dowel length 25 - 40 mm Insertion allowance 7 - 20 mm Air connection: 6 bar Price ex warehouse 54634 Bitburg - immediately available -

Condition: reconditioned (used), Year of construction: 1982, functionality: fully functional, Two speeds: 1400 rpm at 1.1 kW, 2800 rpm at 1.5 kW Compressed air connection 6 bar Fully automatic pneumatic control with foot valve Additional switch for "chip removal" program T-shaped drill head with 7+2 drill spindles, 32 mm pitch Drill shank diameter 10 mm 90° pivoting with locking mechanism Chassis Knodpfsv Npw Eox Adyoc

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, hole spacing: 32 mm, Ganner Gannomat belt and line boring machine Blum and Grass drill head 7 Spindle row hole drilling head incl. extension rulers 32 mm system Kjdpfjq E Ur Aex Adyjnc pneumatic version

Condition: excellent (used), CN LINE of Cutting-Off and Tenoning-Mortising for 5-pieces front drawers or kitchen front doors 200037A) Optimizing Defecting Cut-off Saw "OMGA" Mod. Optima 120 SNC 4000 Workpieces Width x Thickness: mm 200 x 110 / mm 245 x 80 / mm 275 x 50 / mm 300 x 14 With: CNC, pusher feeding system, pneumatic tail clamp, outfeeding with motorized conveyoring carpet No. 1 Working unit (Circular Saw, max diameter mm 450/500) power Kw 4,6 (ca.) 200037B) CNC Double-end rouding Tenoning + mortising machine "BALESTRINI-CMS" Fox Lynk Workpieces Width x Thickness: MIN. mm 38 x 20 / MAX. mm 75 x 25 With: CN, hooper-feeder, out-feeding movable pusher No. 2 Working Units: 1st with shaping (tenons) + drilling (mortises) / 2nd with shaping (tenons) Knedpfszxn S Asx Adyoc 200037C) Automatic Glue applicator "GANNOMAT" Mod. Injecta II No. 2 Glue injecting units: 1 at left-hand + 1 at right-hand 200037D) Rotary Cope and Stick Door Clamp "DOUCET" Mod. RDM-TM 5 30-72 Machine designed for quick and accurate assembly, clamping and squaring of cabinet doors With 5 stations, to assembly large pantry doors up to mm 750x1800 down to drawer fronts mm 137x312

Condition: used, usedmanufactured by Gannertype Superdrillnumber of spindles 19 piecespindle distance / grid 32 mmhydraulic feeder brakeguide fences 2 piece length ca. 3,0 m / 1,5 mworking width 640 mmdrilling depth 95 mm / 110 mmdrill chuck D 10 mmpendulum fence 6 piececlamp 3 piecedrilling unitframe dowel unitrequired space ca. 1400 mm x 900 mm x 1200 mmtotal connected power 1,5 kWlocated in 97447 Gerolzhofen, free on truck, unpackedsale in current condition as seen,without revisionwithout guarantee and warranty Kjdpfx Aevwf R Rodyenc

Condition: new, Year of construction: 2025, GANNOMAT "MASTER 325" FRAME DOWEL AND MORTISE BORING MACHINE Specifically designed for staircase construction Complete in standard configuration according to price list 01/19/D, featuring: - Precision collet chuck for ER40 collets Ø 3-26 mm, incl. collets Ø 10 / 13 / 16 / 20 - Pole-switchable motor 1400/2800 rpm, 1.5 kW - Line laser with bracket - Boring unit, continuously rotatable from the front (65°-0°-65°) - Position setting via digital counter - Position adjustment for 2 levels, pneumatic (0-100 mm) - Maximum boring depth 200 mm - Precision indexing rail with 12 mm pitch with central detent and lateral adjustment 320 mm - Complete stop system consisting of: 1 center stop and 1 stop for oversized frames 1 stop rod, approx. 850 mm long (can be reversed from left to right) 2 flip stops - Mortising unit lowerable, with 2 program cams (400V, 3Ph, 50Hz, 1.5 kW) Extraction funnel, dust-tested, Ø 80 mm Double miter stop adjustable from 0°-60° Knsdpfsxdttpex Adysc Pneumatic clamping of the X-axis with on/off switch at the indexing handle Pair of auxiliary workpiece supports, swiveling (left and right) Clamp column re-positionable to the front Chassis with 4 wheels for easy machine movement 1 piece Collet extension Ø 20 mm, incl. collet for drill shank Ø 9 mm 1 piece Baluster drill bit Ø 25 mm, chrome steel, with centering tip Available: at short notice

Condition: new, Year of construction: 2025, CNC-controlled drilling, gluing, and dowel insertion machine Complete in standard configuration with: - Support with linear guide consisting of: 1 pc. single-spindle horizontal drilling unit, motor 0.65 kW, stroke 70 mm Tool speed selectable via operator software (3000/5000/8000 rpm) 1 pc. blow-out, gluing, and dowel insertion station for dowels Ø 8 mm, dowel length 25–50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 700 mm, max. traversing speed 95 m/min - Z-axis manually adjustable via mechanical digital counter, position on support table 5–40 mm - Dowel insertion projection adjustable from 7–20 mm via mechanical digital counter, drilling depth 0–35 mm (with drill length TL 70 mm), automatically set with insertion projection - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with viscosity from 150 to 350 mPas - Glue quantity steplessly adjustable via operator software - Selector switch GLUE/WATER to flush glue system, each with: 1 stainless steel container for 7.5 kg glue and 7.5 l water - Indicator lamp for residual glue level in glue container - 1 pc. left side stop, 1 pc. right side stop (all removable) - 2 pcs. start buttons for individual operation with 1–2 workpieces - 2 pcs. pneumatic angled clamping cylinders 10° for workpiece thickness up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø 80 mm - 1 pc. TCT controller with: Integrated industrial PC, incl. Beckhoff TwinCAT soft PLC, operating temperature range 0–50°C, 15" capacitive touchscreen TFT industrial display, operating system: WINDOWS 10 IoT LTSC (long term support channel) - Programming via menu-guided user software, drilling distances freely programmable with ABSOLUTE, RELATIVE, or GRID dimensioning, automatic workpiece mirroring and process optimization, 2 working fields assignable with different programs, graphical workpiece display, parametric programming, zero-point shift, programmable work lists, plain text error diagnosis - Integrated options: - Electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle, art. no. 0470-0810 - 1 EASY CLEAN system, for automatic test glue shots before starting the drilling/gluing/dowel insertion program. E.C.S. for 1 pc. glue nozzle, art. no. 0471-Z010 - 1 single-spindle vertical drilling unit from ABOVE, 0.65 kW, (3000/5000/8000 rpm), position (Y) manually adjusted via mechanical digital counter Knsdew Sgm Hopfx Adysc Adjustable from 5–40 mm, drilling depth (Z) max. 30 mm (with drill length TL 57 mm) Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (incl. drilling depth compensation, e.g., for Häfele Minifix) Art. No. 0471-0830 - 4 vertical angled clamping cylinders 10° with mount, additional, Art. no. 0470-0850 Available: short notice