Used Gear Hobbing Machine for sale (70,949)

Condition: used, Year of construction: 2023, max. wheel diameter 200 mm gear width 60 mm max. module 5 min. module 2 workpiece weight max. 6,0 kg total power requirement 4 kVA weight of the machine ca. 0,5 t dimensions 1,35 x 1,55 x 1,7 m Less used Gear deburing machine - 3-jaw chuck ZG 125 - One twist in 5- 120 sec. - After test maybe modil 1,25 possible - Working Unit 1, milling function Iodpfx Afszy Satehsbb - Working Unit 2, brush function - dust collector - automatic mode

Condition: excellent (used), Year of construction: 1972, functionality: fully functional, For sale: this gear hobbing machine. It is connected and can be tested. Comes with numerous accessories. Technical specifications: Max. gear diameter: 7100 mm Gear width: 1500 mm Max. module: 45 Table diameter: 4000 mm Hob diameter x width: 400 x 500 mm Max. helix angle: 45 degrees Cutter diameter: 500 mm Cutter speed: 9–63 rpm Total power consumption: 47 hp Machine weight: 160,000 kg Ibjdjxwlthjpfx Afhob The machine has hydraulic workpiece balancing. A video of the machine can be sent via WhatsApp.

Condition: excellent (used), I am selling this machine, connected, can be tested. Max. workpiece diameter ..... 1600 mm Module ..... 16 - Power of the main electric motor ..... 12 kW Dimensions l x w x h ..... 4300 x 2000 x 3170 mm Ibjdpfxev Nqppe Afhsb Machine weight ..... 18500 kg Can send a video of the machine, via whatsapp.

Condition: excellent (used), functionality: fully functional, WMW Heckert ZFWVG 250×1250 No. 71740386401 Long thread and spline milling machine, also for gear cutting. (Thread milling and spline shaft hobbing machine) Max. workpiece diameter: 250 mm (the machine can swing up to 500 mm above the bed/support) Milling length (Z-axis): 1250 mm Tailstock height above bed: 260 mm Spindle diameter (bore): 102 mm Max. module: Up to module 10 / 18 (depending on the specific head configuration) Spindle speed: 45 – 560 rpm Ibsdpfxjzxn Ane Afhob Total power consumption: 9.5 kW Machine weight: Approx. 3,800 kg

Condition: excellent (used), functionality: fully functional, WMW Heckert ZFWVG 250X800 No. 262122/42 Long thread and spline milling machine, also for gear hobbing. Ibsdpfx Aszxqbysfhsb (Thread milling and spline shaft hobbing machine) Max. workpiece diameter: 250 mm (the machine can swing up to 500 mm over the bed/support) Milling length (Z-axis): 800 mm Tailstock height above bed: 260 mm Spindle diameter (bore): 102 mm Max. module: Up to module 10 / 18 (depending on the specific head configuration) Spindle speed: 45 – 560 rpm Total power consumption: 9.5 kW Machine weight: Approx. 3,400 kg

Condition: ready for operation (used), Year of construction: 1989, operating hours: 2,100 h, functionality: fully functional, thread length: 880 mm, feed length X-axis: 1,000 mm, feed length Z-axis: 100 mm, feed rate X-axis: 1 m/min, feed rate Y-axis: 5 m/min, position of the milling head: Horizontal, swivelling, center height: 1,060 mm, type of input current: AC, power of feed motor: 4,000 W, milling spindle length: 200 mm, spindle bore: 90 mm, spindle speed (max.): 400 rpm, spindle speed (min.): 25 rpm, mandrel length: 200 mm, collet bore: 90 mm, clamping length: 880 mm, workpiece diameter (max.): 500 mm, Thread Milling and Gear Hobbing Machine MSZ 5A352ПФ2 The MSZ model 5A352ПФ2 is a universal thread milling and gear hobbing machine, designed for machining splines, worms, and cylindrical gears by milling and hobbing processes. Manufactured in 1984, the machine is intended for industrial applications requiring reliable performance, versatility, and repeatable accuracy. Ijdpfx Afox Unpvohebb The machine is suitable for workpieces with a maximum length of 1000 mm and a maximum diameter of 500 mm. The maximum machining (spline/thread) length is 880 mm, and the machine supports gear cutting up to module 8, covering a wide range of thread and gear machining tasks. Helix and thread angles up to 30° can be machined, allowing flexible use in mechanical engineering and transmission manufacturing. The milling and hobbing spindle features a 90 mm spindle bore and supports cutting tools with a maximum hob diameter of 160 mm and a maximum hob length of 200 mm. The spindle operates in a speed range of 25 to 400 rpm, providing suitable cutting conditions for different materials and tool diameters. The main drive motor offers multiple power and speed stages (5 / 6.3 / 10 kW at 750 / 1000 / 1500 rpm). The machine is equipped with stepless longitudinal and radial feeds, with longitudinal feed rates from 2 to 100 mm/min and radial feed rates from 2 to 50 mm/min, enabling precise control during machining operations. The milling head is horizontal and swivelling, and the machine allows accurate synchronization for thread milling and gear hobbing operations. With overall dimensions of approximately 3100 × 2270 × 2100 mm (up to 3540 × 2515 × 2100 mm with auxiliary equipment) and a total weight of about 7890–8500 kg, the 5A352ПФ2 features a rigid, heavy-duty construction that ensures excellent stability and vibration damping. The machine operates on three-phase AC power (380 V, 50 Hz) and is equipped with a PU F5007 control system. Condition: *Used machine *Ready for operation *Fully functional *Operating hours: approx. 2,100 h Scope of delivery: *Complete set of change gears *Technical passport (Russian) *Operating manual (Russian) Typical applications: *Thread milling *Gear hobbing (spur gears, worms) *Machining of transmission components *General mechanical engineering *Repair and small- to medium-series production

Condition: excellent (used), functionality: fully functional, Horizontal Gear Hobbing Machine Manufacturer: WMW HECKERT Iodpfx Asyr S Upefhsbb Model: ZFWVG 250x2000 VEB Fritz Heckert ZFWVG 250×2000 Max. workpiece length: 2,000 mm Max. workpiece diameter: 250 mm Accessories: second milling head, hobs for various modules, steadies, clamping devices, etc.

Condition: used, Year of construction: 1959, total height: 1,900 mm, total width: 2,200 mm, total length: 1,500 mm, Colour: Blue Empty weight: 2.500 kg Ibsdpfjzkui Ssx Afhob - Year: 1959 - Documentation available: Yes - CE certificate present: No - Serial number: 80 - Drive system: Conventional - Power [kW]: 5.0 - Transport dimensions: 1500mm x 2200mm x 1900mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), functionality: fully functional, Thread milling machine Brand: WANDERER Model: 31L1000 Turning length: 1000 mm Height above cross slide: 125 mm Spindle bore: 80 mm Ibjdey Rgmxepfx Afhjb Swing over bed: 420 mm Tool diameter: 120 mm Spindle speed: 55–250 rpm

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Iedjxxb Rrepfx Afhebb Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 1979, max. wheel diameter 420 mm gear width 120 mm max. module 7 mm min. module 0,5 gear hobbing diameter - external 420 mm gear hobbing diameter - internal 370 mm table diameter 400 mm boring diameter 125 mm spindle stroke 120 mm stroke position adjustment 230 mm strokes - infinitely variable 30 / 800 Hub/min depth feed stepless 0,016 - 0,063 mm/Hub total power requirement 35 kW weight of the machine ca. 7,5 t dimensions of the machine ca. 2,46 x 3,48 x 2,66 m Accessories: - Various replacement wheels and blade holders Iedpfxjzv Ulqo Afhebb - Documentation

Condition: good (used), I am selling this machine, equipped, already disconnected, stored in stock. Video of the machine can be sent. Iodpfjtuipmex Afhebb max. wheel diameter 710 mm max. module 10 Spindle speed : 700-2800 1/ min. Machine weight : 13,500 kg

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar Iedpfox D Tbmex Afhjbb YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), max. workpiece diameter 600 mm threading length 7000 mm max. module 8 / 12 min. module 1 swival range ° diameter of hob 63 - 140 mm spindle turning speed - stepless 45 - 450 U/min weight of the machine ca. 12,5 t dimensions of the machine ca. 9,0 x 2,0 x 2,2 m Condition: In good condition, checked and partially overhauled by a specialist. The existing milling head was replaced by an overhauled universal milling head. Furnishing: Differential for inclined machining Automatic indexing device (indexing discs changeable!) For multi-wedge, multi-thread parts, then extensive bushings, support rollers and around 70 Change gears. Conversion of the milling head speed to a frequency converter with corresponding powerful motor is a great thing and saves a lot of set-up time. Equipment: Isdpswgizdsfx Afhjbb Around 70 change gears, 3 bushing sticks of different sizes, around 20 Bushings, 2 roller mountings, 2 tips for direct mounting on the Clamping spindle, 350 mm chuck, 2 spare part disks.

Condition: used, Year of construction: 1985, max. wheel diameter 80 mm gear width 150 mm max. module 2,5 min. module total power requirement 10 kW weight of the machine ca. 2400 kg M I K R O N (Switzerland) Fully Automatic Gear Hobber for Worm Gears Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15 _____ max. gear- without feed magazine approx. 80 mm max. gear- with feed magazine approx. 50 mm Module max. 2, / 2,5 Axial milling length approx. 150 mm max. workpiece-mounting length approx. 200 mm Ibedpjt Hw D Rsfx Afhob Milling slide can be swivelled up to 90 degrees Milling cutter - 24 - 50/63 mm Max. radial distance of milling slide 0-14/18 mm Milling cutter adjustment max. 25 mm Milling cutter speed 212 - 2.000 rpm Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation radial infinitely adjustable 0,2 - 200 mm/min. Milling spindle drive 3 kW Total electrical load approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2.400 kg Accessories/Special Features: " Fully automatic operation cycle and minimum idle times due to programmable SIEMENS Program Controls S 5 for all machining steps i.e. rapid gear, feed, milling cutter on/off for the loading device, tailstock, possibly shifting, etc. with unit counter, program numbering including 30 different numeric error displays Pneumatic workpiece-loading and unloading facility parallel to work piece axis upright for rod workpieces approx. 140 mm long x 8 mm , including pneumatic double gripper for loading and unloading of work pieces. Raw parts are inserted into change cassettes externally and then placed into the loading device. The double gripper places the parts between workpiece spindle and tailstock, the tailstock spindle sleeve pushes the parts in the main spindle collet and clamps them simultaneously. The finished parts are ejected from the main spindle, then placed back again into the finished parts cassette by the gripper. The whole process is electrically monitored and checked. The complete loading facility is encased by plexiglass. " Hydraulic work piece clamping device including collets and hydraulic ejector " separate cooling system with magnetic separator * separate hydraulic system * various change gears This machine is set up for worm gears/armature shafts that can be used for adjustable car seats, window lifters, etc.

Condition: refurbished (used), functionality: fully functional, Refurbished milling head from Pfauter PE150. Ibedpozr Hc Tefx Afheb

Condition: excellent (used), Year of construction: 1979, Kapp AST‑305B – Technical Specifications Machine type: automatic hob and gear cutter sharpening machine Year of manufacture: circa 1979 Machine function: resharpening of hobs, spiral or straight gash cutters; wet or dry grinding Maximum tool diameter capacity: 12 inches (300 mm) Maximum tool length between centers: 27 inches (700 mm) Maximum table traverse: 21.56 inches (550 mm) Ibedpfxewwkt As Afheb Maximum grinding wheel diameter: 12 inches (300 mm) Maximum center height: 6.1 inches (155 mm) Table speed (infinitely variable): – deep grinding: 30 to 1000 mm/min – surface grinding: 3 to 16 mm/min Flute lead angle range: 0° to 45° Flute lead range: selectable, up to 24‑inch to zero or 12‑inch to zero Grinding spindle speed: 2200 rpm (optional 1000–4000 rpm) Axial grinding spindle adjustment: 16.54 inches (420 mm) Vertical grinding head adjustment: 11.81 inches (300 mm) Spindle taper: Morse 4 or steep taper 40 Preselectable single in-feed: range 0 to 9999 (units) Machine dimensions: length 118 in × depth 82 in × height 93 in (≈3000 × 2080 × 2360 mm) Machine weight: approximately 7,500 lbs (3,000 kg) Control system: originally manual/analog, often upgraded with Allen‑Bradley PLC

Condition: ready for operation (used), Year of construction: 1977, functionality: fully functional, workpiece weight (max.): 2,000 kg, thread length: 3,000 mm, Ø400, LENGTH 3000 mm, MODULE 8-10, HELICAL AND STRAIGHT GEAR CUTTING. Isdpfx Afozkrgbohjbb

Condition: used, Year of construction: 1963, Technical details: max. wheel diameter: 900 mm max. module: 10 weight of the machine ca.: 8200 kos. Ibjdpfxevkpu Hj Afhjb hob dia. - max.: 190 mm cutter length max.: 320 mm milling spindle speeds (infinitely variable): 13-80 U/min workpiece length - max.: 750 mm max. workpiece diameter: 150 mm Counter holder milling mandrel is missing *

Condition: used, Year of construction: 2018, max. wheel diameter 450 mm max. module 4 mm Control Siemens 840 D sl internal diameter 100-300 mm weight of the machine ca. 11 t dimensions of the machine ca. 5,85 x 8,30 x 3,80 m GLEASON-PFAUTER 300 PS Gear Skiving Machine – Year 2018 For sale is a high-performance CNC gear skiving machine type GLEASON-PFAUTER 300 PS, built in 2018. The machine is ideally suited for the precise machining of internal gears and offers excellent dynamics, advanced CNC technology, and a robust machine design. Equipped with a powerful Siemens 840D sl CNC control, this machine provides optimal conditions for efficient and repeatable gear manufacturing processes. Technical Specifications - Max. gear diameter: 450 mm - Max. module: 4 mm - Internal diameter range: 100 – 300 mm - Max. allowable skiving cutter diameter: 175 mm - Mounting surface diameter: 125 mm - Axis Travels: X-axis travel: 350 mm Y-axis travel: 300 mm Z-axis travel: 440 mm - Max. skiving head swivel angle: ±25° - Workpiece table outer diameter: 570 mm - Max. table load capacity: 5 kN - Feed Rates and Speeds X-axis feed rate: 12,000 mm/min Y-axis feed rate: 5,000 mm/min Z-axis feed rate: 8,570 mm/min - Tool speed: 0 – 3,000 rpm - Workpiece table speed: 0 – 1,500 rpm Additional Equipment / Information Ibedpfozupl Nox Afhjb - CNC Siemens 840D sl - Swivel gripper slide travel: 180° - Operating voltage: 400 V - Machine weight: approx. 11 t - Space requirement: approx. 5.85 × 8.3 × 3.8 m - Hydraulic oil capacity: 150 l - Coolant capacity: 850 l - Motor and hydraulic cooling: 100 l The machine is in very good condition and is ideally suited for demanding series production and high-precision gear manufacturing applications. Inspection by appointment possible.

Condition: used, Year of construction: 1977, max. wheel diameter 400 mm gear width 280 mm max. module 1 min. module 4 total power requirement 15 kW Ibjdpfxot Hw Hxs Afheb weight of the machine ca. 6000 kg dimensions of the machine ca. m

Condition: used, Year of construction: 1995, max. wheel diameter 80 mm gear width 120 mm max. module 3 min. module 1 control SIEMENS 840 C total power requirement 30 kW weight of the machine ca. 7500 t dimensions of the machine ca. m L I E B H E R R CNC – Controlled Gear Hobbing Machine Type LC 82 Baujahr 1995 Ser.-Nr. 0836 _____ Gear-Diam. max. 80 mm Module Range 1 - 3 Helix Angle +/- 45 ° Distance Table Center to Tool Center 15 – 160 mm Hobbing Head Slide stroke vertical 250 mm Tangential Travel / Shift Travel of Tool slide 180 mm Minimum Number of Teeth 3 (!) Hob Size max. Ø x length approx. 90 - 200 mm Taper of Hob spindle HSK 50 A Workpiece Clamping length (table/Tailstock) 250 mm Infeed rates axial/radial/tangential/ 20/4/5/ mm/WP rev. Hob speed steplessly adjustable 0 – 800 rpm Ibjdpfxjt Hw R De Afhob Hob Spindle Drive 8 kW - Total Load approx. 30 kW - 400 V – 50 Hz Total weight of Machine approx. 7.500 kg Special attachments / accessories: • SIEMENS - CNC-Control Model 840 C for 6 axis (i.e. Hob drive/table drive/ swivel angle of hob head/ Radial axis/Axial Axis/ Tangential Axis ) with a surface especially designed for the gear manufacturing with error display function. • Automatic and contactless tooth meshing device to adjust the hob into workpiece. • Automatic Shifting of hob slide. • Automatic Workpiece handling system Model SSL for high speed loading and unloading of Workpieces, consisting of a steel chain3,, for workpiece carriers and 3-fold WP-Gripper for blanks, for the machining position and for unloading of finished parts onto the steel band. Actual Workpiece size to be machined: approx.. Ø 30 x 120 mm length, helix gear sprocket. Clamping of workpiece between centers by a mechanical, cam controlled quill in tailstock. • complete workarea protection with one sliding door, chip conveyor, small coolant device, oil dust Absorber, WP Carrier, etc. The Machine can be also used for dry cutting. Condition : Satisfactory to Good . Machine can be inspected under power here in stock. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 2008, XYZ SMX 5000 CNC Vertical Turret Milling Machine With Prototrak SMX Control Table Dimension 1,930 x 355mm (4 'T' Slots). Maximum Table Load 850kg. Axis Travel 'X'=1,524mm, 'Y'=596mm, 'Z'=520mm. Quill Ø116mm. Quill Travel 127mm. Spindle Nose to Table 620mm. Spindle Centre To Column Face 520mm. Speed Range 40-5,000rpm (7.5kW Motor). Spindle Taper ISO40. Power Drawbar. S/No. 11100 (2008). Ibedezvp E Espfx Afheb With Coolant System, Table Guarding, Work Light, Vertex Heavy Duty Vice (Jaw Width 205mm), Indexing Head 3 Jaw Chuck 200mm, Centre Height 170mm, 8 Drawer Steel Cabinet With Contents Of Spindle Tooling & Clamp Sets. Approx Overall Dimensions L5,805 x W3,143 x H2,690mm. Weight 3,100kg. Note: Machine Had Control Upgrade 2023.

Condition: used, Year of construction: 1963, total height: 1,850 mm, total width: 800 mm, total length: 3,900 mm, Empty weight: 3.000 kg Price: On request Stroke: 1500mm Capacity: 10t - Year: 1963 - Documentation available: Yes - CE certificate present: No - Drive system: Conventional - Power [kW]: 7.5 - Transport dimensions: 3900mm x 800mm x 1850mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Ijdjy Auy Rspfx Afhobb Lukas van Rossum

Condition: ready for operation (used), Year of construction: 2015, A high-performance planetary gear production line EMAG including automation and peripheral equipment is available. 1) Raw parts storage (stacker) EMAG. 2) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 3) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 4) Vertical hobbing machine EMAG VLC200H, max. workpiece diameter: 200mm, max. module: 4, travel X/Y/Z: 790mm/120mm/400mm, swivel range: +/-35°, control: Siemens 840D sl. 5) Vertical chamfering/deburring machine EMAG VLC100C, max. workpiece diameter: 100mm, max. workpiece height: 150mm, travel X/Z: 900mm/375mm, control: Siemens 840D sl. 6) Internal automation EMAG TrackMotion with 2x TransLift carriages. Type: transfer automation, purpose: part feeding/intermediate station transport/part removal, control: HT8. 7) O-belt automation for each EMAG machining machine with pallet and belt buffer, max. pallets: 24pieces/machine. 8) Marking press Markator for part marking. 9) Part handling unit EKF Automation in gantry design. 10) Basket stacking cell EKF Automation for the finished parts storage, number of stacks: 3. Documentation available. An on-site inspection is possible under power connection. Ibsdpjx Dm D Ijfx Afhjb