Used Glass for sale (3,724)

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 2,400 mm, total length: 3,400 mm, total height: 910 mm, overall weight: 450 kg, warranty duration: 12 months, Glass processing / assembly table. Dimensions 340 cm x 240 cm. Table lifted by gas springs. Covered with glass felt. Table on wheels - mobile. We recommend our other products for the glass industry. Blsdpfxsgk A Eke Ab Dol

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 1,860 mm, total length: 2,800 mm, total height: 910 mm, overall weight: 300 kg, warranty duration: 12 months, Glass processing / assembly table. Dimensions 280 cm x 186 cm. Table lifted by gas springs. Covered with glass felt. Table on wheels - mobile. We recommend our other products for the glass industry. Blsdpogk Ay Hjfx Ab Djl

Condition: new, Year of construction: 2026, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, actuation type: electric, rotational speed (max.): 3,100 rpm, rotational speed (min.): 700 rpm, total width: 1,487 mm, total length: 4,440 mm, total height: 2,793 mm, throat depth: 1,490 mm, overall weight: 1,900 kg, Equipment: CE marking, documentation/manual, NEW | YEAR 2026 | CE CERTIFIED | MADE IN POLAND | EXW €38,000 + VAT WHY THE PRIAM The Priam is a vertical, electronically controlled glass drilling machine that does most of the work for the operator. The entire feed is electronically controlled — drilling is smooth and repeatable. The operator's role is minimal. After mounting the hole saws, they press the "Calibration" button — the machine measures the length of both drills (front and rear) and their diameter, then automatically assigns the correct spindle speed. After every drill change, the machine will not start drilling until calibration is done — setup errors are impossible. The hole position on the vertical axis is entered on the monitor and the support bar travels there automatically (up to 1,060 mm below the spindle axis); horizontally, the glass is positioned against 6 stops. Blodpeh Ek H Sefx Ab Dsl The machine does the rest: the pneumatic clamp measures the glass thickness, the rear spindle pre-drills to a depth calculated by the controller, and the front spindle completes the hole from the other side — chip-free, clean edges at the first attempt. Optional: double-sided chamfering (hole saw with chamfering ring), tapered holes, and pulse drilling mode for laminated (VSG) glass. BUILT FOR SERIAL PRODUCTION Up to 20 holes on the vertical axis can be programmed — the operator enters the dimensions once and the machine drills them automatically. In serial production (shower enclosures, balustrades) the following panes are drilled without re-entering positions. Drilling at position 0 on the support bar allows holes on the glass edge (half-moon cut-outs). Performance: a Ø 75 mm hole in 4 mm glass in approx. 25–30 s (feed in glass approx. 1 mm/s, speed set by the operator). Recommended: thin-wall, self-sharpening hole saws (e.g. Champion, L=75 mm). TECHNICAL DATA Drilling diameter range: Ø 5–80 mm (both drills same diameter) Glass thickness: 2–20 mm Max. pane size: 2,000 × 4,000 mm, up to 200 kg Support bar travel: up to 1,060 mm below spindle axis Holes on the glass edge (half-moon): yes, position 0 Drilling program: up to 20 holes on the vertical axis Spindle speed: adjustable 700–2,800 RPM, assigned automatically after calibration Feed: automatic, electronically controlled Cooling: closed water circuit, approx. 30 l Compressed air: 6 bar (pneumatic clamping) Power supply: 400 V / 16 A / 4 kW Machine dimensions (L × W × H): 4,440 × 1,487 × 2,793 mm Weight: 1,900 kg Scope of delivery: CE marking, documentation, operating manual MANUFACTURER, SERVICE, TERMS EXPOGLASS is a Polish manufacturer of glass processing machinery — built at our own factory in Nysa (in-house welding shop and powder coating). Service with online support; spare and wear parts available from stock. Delivery and commissioning across the EU, operator training on site. Delivery time: approx. 8 weeks. Warranty: 12 months. Visit our factory and see the Priam drill your own glass samples before you buy — video of the machine in operation in this listing. Glasstec 2026, Düsseldorf, 20–23 October, Hall 12, Stand 12A72.

Condition: new, Year of construction: 2026, functionality: fully functional, number of drawers: 30, SLIDING RACK FOR GLASS M80-30 Blodpfx Aeha E S Teb Dsl MANUFACTURED IN 2026/ BRAND NEW We manufacture sliding racks for glass pane storage (boxes with glass) or other panel materials (metal sheets, quartz sinters, polycarbonates, furniture boards). We design and manufacture our racks from scratch in Poland. The materials which we use for manufacturing hold the proper certificates of durability and they are subject to quality control on a continuous basis. Storage racks consist of sliding and slightly inclined drawers. They save up to 75% of space because all the partitions are parallel and they are separated every 10 millimetres. We also offer various sizes and load-bearing capacities. However, after consultations, we are able to manufacture a storage rack of different parameters, considering your individual conditions and requirements. The inclination of spans depends on assembly – it may be right hand sided or left hand sided. We recommend this storage rack especially to glass production facilities, stoneworks facilities, furniture production facilities and advertising companies, which want to use their space effectively. The racks are delivered for self-assembly in a package. The assembly is very simple and easy owing to our long-term experience which allowed us to create a well-thought product which is attached with the assembly instructions, making the assembly trouble-free. In case of any problems, do not hesitate to contact our technical department. We also provide charged assembly services by our technicians in your location. M80-30 RACK TECHNICAL DATA Intended use – single glass panes 255 cm x 160 cm Maximum pane size - 275 cm x 170 cm Number of partitions -30 The width of the storage strip for glass – 8 cm The length of the storage strip for glass - 308 cm The material on which glass is placed – wooden board 308 cm x 8 cm x 2.5 cm Structure height (A) – 218 cm Structure width (B)- 436 cm Structure depth (C)-318 cm Space needed for the correct use of the rack – 27 m2 Requirements for the ground – smooth/straight The number of the partition guide bearings – 8 pcs. Front wheel – Ø 160 / reinforced polyamide Rear wheel – steel wheel with a bearing / rolled along the profile Colour - RAL 7040 (grey) Anti-corrosion protection – phosphating and powder-coating of steel elements Permissible load-bearing capacity of a single partition – 900 kg Permissible load-bearing capacity of the whole rack – 27000 kg Partitions inclination – left or right – depending on assembly Assembly time - 14 hours The number of people required for assembly – 2 people DOCUMENTS ATTACHED TO M80-30 RACK - User’s Manual - Assembly Instructions - Rating plate - 12 months’ warranty The product is delivered as a whole ready for use. We also deliver our racks for glass to the EU countries and other countries.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2022KL2938, total width: 2,400 mm, total length: 3,400 mm, total height: 910 mm, overall weight: 900 kg, warranty duration: 12 months, • Glass cutting table SDRD FULL Tilted table which supports the process of manual cutting the glass, product designed and manufactured in Poland Length - 3400 mm Blodoh Nx R Tspfx Ab Dsl Width - 2400 mm Height - 910 mm Breaking bar - 2 pieces in cross arrangement Bars steering - by foot pedals Air cushion system - installed Power of fans (air cushion) - 2,2 kW Air cushion system steering - by foot pedals and hand button Tilting of the top - pneumatical Stabilization of tilting - by hydraulic speed controller Support of quick tilting - by to gas springs Pull-out cantilevers of glass loading - yes, manually Covering of the top - grey felt Covering of the circumference - ash slats Wheels - 4 rotary, with increased load Levelling feet - 4 pieces installed Steel construction covering - polyurethane covering Filling of the lower beam in stationary construction - vibrated, fibre reinforced concrete Table available from stock. Our company also delivers worldwide.

Condition: used, The Bottero 110 FX is a robust, vertical flat glass straight-line edging machine designed for continuous operation. Specifications: • Type: 110FX • Serial number: 30600100001753-05040_011 • 10 spindles • Direction of travel: right – left • Glass thickness: 3 – 30 mm Bsdszr Upzepfx Ab Doll • Year of manufacture: 2020 • Feed rate: 0.6 – 6 m/min • Minimum glass size: 40 x 40 mm • Glass thickness: 3/50 mm • Speed: 0.6 / 6 m/min • Installed power: 27 KVA • Weight: 3,600 kg • Water tank included

Condition: used, • Grinding machine for straight edges. Equipped with two processing stations. Depending on the selected diamond grinding wheel, the desired profile is created and polished. All settings are easily and conveniently adjusted from the front (cup wheel, material removal rate, angle of attack). • Serial number: 84082 • Width – 0.90 m • Infeed – 1.40 m, Outfeed – 1.40 m • Machine length – 1.33 m Blodpszr Iyaefx Ab Dol • Height – 2.05 m • Overall length – 4.13 m • Weight 1050 kg • Price: Available upon request.

Condition: used, Year of construction: 2007, functionality: fully functional, BAVELLONI GEMY 8 - Year 2007 8-wheel straight-line edging machine Glass thickness: 3 - 35 mm Minimum size: 35 mm Power: 19.5 kW Bljdpezx Sc Ejfx Ab Dsl Machine dimensions: 7.03 x 1.7 x 2.3 m Weight: 2710 kg 337,000 units GEMY 8 - Year 2007 8-wheel straight-line edging machine Glass thickness: 3 - 35 mm Minimum size: 35 mm Power: 19.5 kW Machine dimensions: 7.03 x 1.7 x 2.3 m Weight: 2710 kg 337,000 units

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, total width: 9,500 mm, total length: 29,325 mm, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Lisec jumbo cutting line for float and laminated glass, year 2008, consisting of following: LBR-60/30, 2-part, 1x650, 1x360 and 17x180 mm glass storage multi-rack ATF-60/30, moveable glass loader to pick up sheets from the glass storage multi-rack GFB-60/30RE-S, float glass cutting table VB-60 + roller transport field, laminatd glass cutting table for maximum cutting length of 6000 mm LKT-21/33, air cushion transport field Blsdpfx Aezxgt Sob Dol LKT-21/33, air cushion transport field with glass turning support LKT-21/33, air cushion transport field BHK-50/33, break out table with tilting function CE-safety fences The cutting line is in very good condition and is available immediately from current place within EU.

Condition: used, • Silikant – 3000 • Item No.: 8683 • Year of manufacture: 2007 • Belt size: 100 x 3000 mm • Abrasive belts and polishing belts can be purchased separately. Bjdjzrvxdepfx Ab Doll

Condition: used, • Type: Duplokant S-2 • Serial number: 8680 2-11 • Year of manufacture: 2007 Blsdpfx Aozrvwgeb Djl • Belt size: 100 x 3000 mm • Included: 512 sanding belts and 66 polishing belts, which can be purchased separately.

Condition: used, Year of construction: 2012, Used BOTTERO glass laminating cutting table, Type 535 AVLE-46, Year 2012. Bledpfx Aszn I Atsb Del

Condition: ready for operation (used), Year of construction: 2010, RHV-C&V GmbH & Co. KG glass jar capper type: LW560 serial number: 10172/4184 year of construction: 09/2010 Bjdpoyxgxwsfx Ab Doll stainless steel conveyor belt, belt width: 120 mm

Condition: ready for operation (used), Cap diameter range: 28 mm – 110 mm Jar diameter range: 30 mm – 99 mm Steam injection Linear infeed Bledpfxjyzbh So Ab Djl

Condition: good (used), Glass loading fork for split dimensions tapes, max. glass width: 2550 mm, min. glass width: 1200 mm, max. glass length: 3210 mm, Minimum glass length: 2200 mm. Dimensions of the goods: Bledpfxslz N Eys Ab Djl Depth: 600mm, Width: 2100mm, Height: 3100mm, Weight: 220kg.

Year of construction: 2023, condition: ready for operation (used), Max. glass thickness: 50mm, drilling diameter: 4-200mm, connected load: 1.5kW, weight: 270kg, the machine was never used. Blsdpfxsnp I N Ae Ab Del

Condition: new, Year of construction: 2024, Safety glass window for a Gildemeister CTX Beta 500 V4, item in original packaging, unused and new. Bsdpfjyx U Slsx Ab Dell

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: GG6BCO-7816, total width: 3,660 mm, total length: 7,100 mm, overall weight: 3,300 kg, type of input current: three-phase, input voltage: 380 V, input frequency: 50 Hz, compressed air connection: 6 bar, pressure: 6 bar, Bottero 100BLC jumbo table with belts and air cushion as loading and supporting table. Serial Number: GG6BCO-7816 Bjdpfex A D Rvsx Ab Doll Dimensions: L7100xW3660mm and approx. 3300Kg

Condition: ready for operation (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 520-003956, Lisec spacer bender Printer for spacers not available Bljdjvktytepfx Ab Djl

Condition: used, functionality: fully functional, machine/vehicle number: 105, number of drawers: 12, total width: 6,000 mm, 12-position Jumbo storage 10 manually movable racks with 150mm pads + 2 fixed positions with 350mm pads (10,000Kg each) Blodpfxjwu N D Is Ab Dol Available from stock (ready for transport, full load)

Condition: used, Year of construction: 2013, functionality: fully functional, input voltage: 400 V, input current: 8 A, input frequency: 50 Hz, overall weight: 520 kg, We offer this used Bottero 710C glass drilling machine, manufactured in 2013. Model: 710C Serial number: GG710C-20596 Year of manufacture: 2013 Voltage: 400 V Bodpfx Abjzmwrno Doll Frequency: 50 Hz Rated current: 8 A Weight: 520 kg If you have any questions or require further information, please send us a message or contact us by phone.

Condition: used, scoring head, glass cutting table, glass cutting table, glass cutting machine -Number: 21x scoring heads available -Manufacturer: Eitzenberger Luftlagertechnik GmbH -Item no.: 093329 -Price per piece -Dimensions: 310/160/H60 mm -Weight: 0.5kg/pcs Bodpob Nfcujfx Ab Dsll

Condition: good (used), Safety glass, glass plates, glass panes, glass transport rack, window transport rack, window racks, glass transport stands Blsdoxwi Uiepfx Ab Djl -Safety glass: 6 mm thick, 62 panes -Various sizes: see photo parts list -Transport racks: 3 pieces -Sale: only complete set -Dimensions: see photos Total weight: approx. 600 kg

Condition: good (used), Glass fibre, glass fleece, laminate, glass fibre material -Manufacturer: Spheretex, sphere core glass fleece material for laminating -Type: sphere core SBC IP Thickness 6.0 mm Width 100 cm 1 roll -Type: BÜFA -Advanced Core CLM Thickness 6.0 mm Width 127 cm 1.27 m² 3 rolls -Price/Delivery: complete -Transport dimensions: 600/400/H1280 mm Blsdjx R S Arepfx Ab Dol -Weight: 12 kg

Condition: good (used), Glass silk nickel stranded wire, cable stranded wire Blsdeb A Svmepfx Ab Del -Type: 1.5 mm² -Wire: 1 -Length: 100 m -Weight: 2 kg