Used Glazing Bead Saw for sale (7,177)

Year of construction: 2016, condition: used, Max. sawing length: 5,000 mm Max. saw blade diameter: 500 mm Automatic positioning of the length and angle (90° or 45°), intermediate mitres adjustable from the front Moving roller conveyor Pneumatic material support with lift-up Minimum quantity spray device USB Port operation manual Bsdpfx Aey Tak Aen Nown Weight: 1400 kg

Condition: used, Year of construction: 2001, Wood dimensions to be processed: Input lengths min/max 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max 40 - 300 mm Input thicknesses min/max 15 - 120 mm Wood cross-sections max. 300 x 40 mm max. 200 x 120 mm Fixed lengths after sawing min. 510 - 2800 mm Special application: Cutting blocks, length min/max. 100 - 200 mm (Caution: Multiple block lengths at the sorting line; blocks are transported to the end of the sorting line and fall into the customer's grid box). Cutting/cutting tolerance +/- 0.8 - 1.5 mm (for wood types with minimal resin content and an even surface. Tolerance up to 1 m fixed length, max. tolerance for longer pieces up to 2.5 m). Thickness tolerance +/- 3 mm. Curvature of the wood in all directions: max. 10 mm per meter in length. Wood types: soft or hardwood. System performance: Feed speed, continuously adjustable up to max. 230 m/cutting cycle 0.6 - 1. To obtain the practical output per day, an effectiveness factor dependent on the customer's production conditions must be calculated. Infeed and saw height: 900 mm (placed on customer's platform, saw requires concrete base). Sorting working height. 2000 mm Connection values: Total electrical connection value approx. 18 kW Operating voltage 380 Volt / 50 Hz Voltage fluctuations max. 5% Air consumption approx. 1200 NL/operating pressure approx. 8 bar Extraction speed approx. 30 m/nd Color pebble gray RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Item 1 Infeed and marking station with 1 side support table, adjustable 1 table as stop edge Item 2 Support roller without drive, front side in front of sheet metal table for easier feeding Item 3 Length measuring station with built-in fluorescence camera for detecting error markings Item 4 Automatic width measurement, contactless Item 5 OptiCut 304 optimizing cross-cut saw - right-hand version with built-in waste chute including equipment package for large wood cross-sections Graphic input terminal (16 x 40 characters, Numeric keypad) with software package for optimization and system control. Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Item 6: Outfeed conveyor as sorting station with drive unit, length 7500 m Item 7: 2 ejectors mounted on the outfeed conveyor Bwedpfx Asw Sy T Hen Non Storage location: Nattheim

Condition: used, Year of construction: 2009, Cutting length: 4200 mm Cutting width: 3200 mm Max. saw blade protrusion: with blade vertical at 0° = 70 mm with blade tilted at 45° = 50 mm Feed speed forward: 0-80 m/min. Feed speed reverse: 100 m/min. Weight: approx. 5400 kg. Motor power: 14 kW Scoring saw: 1.5 kW Tool: diameter: 350 mm bore: 30 mm Extraction port (bottom): 140 mm Extraction port (pressure beam): 100 mm Storage location: Supplier Bedpfx Asyf Nu Tjn Nswn

Condition: used, Year of construction: 2001, max. cutting width: 5300 mm max. cutting height: 2200 mm saw blade diameter: 300 mm max. processing thickness: 80 mm saw blade bore: 30 mm lower support: fixed rollers material support: closed wooden support digital measuring system saw head tilting: manual extraction: external extraction Bodpfx Anoy I Dfgj Nswn saw beam locking: manual weight approx.: 1500 kg dimensions: 6300 x 1500 x 2900 mm motor power: 5.5 kW Storage location: Supplier

Condition: used, Year of construction: 2002, Max. cutting width: 4300 mm, max. cutting height: 2200 mm, saw blade diameter: 300 mm, max. processing thickness: 80 mm, saw blade bore: 30 mm, measurement system: scale, saw head tilting: manual, saw feed: manual, extraction: external extraction, saw beam locking: manual, weight approx.: 1200 kg, dimensions: 5300 x 1200 x 2900 mm, motor power: 5.5 kW. Storage location: supplier. Bwedpfsy I Dd Ajx An Njn

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Used panel dividing saw HPP 230/43/43 Year of manufacture 2015 19-inch TFT screen CADmatic control system Quick-release system "PowerLock" for optimized saw blade change 7 collet chucks instead of 5 Bsdpfx Asza Iw Non Nswn 4 air cushion tables Label printer 7.5 kW motor, instead of 5.5 kW

Condition: reconditioned (used), power: 2 kW (2.72 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, saw blade diameter: 370 mm, saw blade bore: 30 mm, actuation type: mechanical, rotational speed (max.): 2,800 rpm, total length: 10,000 mm, total width: 1,000 mm, total height: 1,400 mm, overall weight: 230 kg, table height: 900 mm, Equipment: saw blade guard, elumatec MGS 72/30 miter saw mounted centrally on a base frame, with infeed roller conveyor, handwheel stop with scale chip extraction Saw: Swivel range from 0° to 45°, infinitely adjustable on both sides locking points at 15°, 30° and 45° saw blade diameter 370 mm saw blade speed 2,800 rpm power connection 230/400 V, 3 ~, 50 Hz power 3 kW length 780 mm, depth 900 mm, height 815 mm weight 120 kg Bsdezaq Tyjpfx An Nswn stable, ground, continuous support table with rotary table on precision bearings low-wear and quiet drive via multi-wedge belt manual saw feed machine overhauled

Condition: good (used), functionality: fully functional, MEBA 335-DGA -3000 automatic band saw, metal band saw WITH AUTOMATIC MITER CUT!!!! Year of manufacture: 2008 3000 mm feed length Variable feed rate and band saw speed Micro-dosing system Bwedpfxoy Ulims An Non Driven chip brush Cutting capacity: 335 mm The machine has only 2120 operating hours and is in very good condition.

Condition: used, machine/vehicle number: 008628, Max. panel width: 4300 mm Max. panel length: 4300 mm Main saw blade projection: 80 mm Bodjzakc Uspfx An Newn No of Grippers: 6

Condition: good (used), Year of construction: 2001, Manufacturer: KASTO Type: KASTOtec A3 Year of construction: 2001 Specifications: Metric Metric US Standard Sawing capacity round 90 330 Sawing capacity flat 90° 330 x 330 mm Max. Sawing speed 12 - 120 Saw blade dimensions 6830 x 41 x 1.3 mm Bwodpou R R Acofx An Nen Saw power 7.5 kW Dimensions (estimate) length 4600 mm width 2150 mm height 2310 mm weight 4300 kg Please note: The information on this page has been obtained from the manufacturer to the best of our knowledge and belief, and where possible, the information is given in good faith but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: good (used), Year of construction: 2001, Manufacturer: KASTO Bsdpfx Asu R R Aven Newn Type: KASTOtec A4 Year of construction: 2001 Specifications: Metric Metric US Standard Sawing capacity round 90 430 Sawing capacity flat 90 430 x 430 mm Feed range 0 - 600 mm Multi-feed range 0 - 9999 mm Min, saw length 35 mm Max. Sawing speed 12 - 120 Saw blade dimensions 6830 x 41 x 1.3 mm Saw power 7.5 kW Dimensions (estimate) length 4800 mm width 2200 mm Height 2200 mm weight 5200 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: good (used), Year of construction: 2001, Manufacturer: BEHRINGER Type: HBP 530 A Year of construction: 2001 Specifications: Metric Metric US Standard Capacity 90° 530 x 530 ° Bwjdpfxeu U Nars An Nen Min, saw length 40 mm Max. Saw length 17 - 110 Saw power 12 kW Chip conveyor Yes Dimensions (estimate) length 4000 mm width 2250 mm height 3270 mm weight 4400 kg Please note: The information on this page has been obtained from the manufacturer to the best of our knowledge and belief, and where possible, the information is given in good faith but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: used, Year of construction: 2015, Beading machine DS-Lifting - H-9000 Bjdpfx Aowrywgen Njwn

Condition: like new (used), functionality: fully functional, Year of construction: 2024, Stainless steel table cart Bwjdpfowpzrmox An Nsn Glazing table with 10 tray shelves 780 x 580 or 600 x 400 trays Mobile with 2 brake castors Used device, cleaned We have many more stainless steel furniture in stock!

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Specification: Length of cut: 3100mm Width of Cut Vertical: 2070mm Width of Cut Horizontal: 1958mm Depth of Cut: 60mm Bwjdpfxjyzf E Uj An Njn Motor Power: 5.3HP Saw Blade Dia: 250mm Saw Blade Bore: 30mm 400V 50Hz

Condition: used, Year of construction: 2022, functionality: fully functional, type of input current: DC, cutting height (max.): 285 mm, actuation type: manual, overall weight: 440 kg, saw band length: 2,950 mm, saw band width: 27 mm, Equipment: documentation/manual, For sale from our warehouse location: Albert-Proeller-Straße 9a, 86675 Buchdorf MEP manual bandsaw machine TYPE: SHARK 282 CCS Motor power 1.5/1.8 kW Table opening 285 mm Band dimensions 2950x27x0.9 mm Weight 440 kg Speed 36/72 m/min Cutting capacity at 0° 250 / 220x220 / 280x220 Cutting capacity at 45° right 230 / 200x200 / 220x200 Cutting capacity at 45° left 200 / 170x170 / 200x140 Cutting capacity at 60° right 120 / 80x80 / 140x80 Cutting capacity at 60° left Accessories: - MD 12 micro-dosing device MINI-GF - EL-1/2-2L Bsdoy Uwuuepfx An Newn - Conveyor roller table, type K 110

Condition: used, suitable for UNITEC 10 or similar, year of manufacture: 1998 CNC motorised control, Quantity: 2 Price per unit: €2,000.00 + VAT Bjdjlkckmepfx An Newn

Condition: used, Bore: 60 mm Width: 3-5 mm Diameter: 370 – 380 mm Bolt circle: 100 mm Bsdpfolf I D Ejx An Newn - as new or sharpened, - 8 pieces, - suitable for Holzma OPT HPP 350 or similar.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Saw for profiles and pipes Manufacturer: Hans Weber Maschinenfabrik GmbH Model: PS-2 Year of manufacture: 2002 Serial no.: PS 2 104 Technical specifications: Profile dimensions: Width: 200 mm Height: 100 mm Pipe diameter: max. 100 mm Bjdpfx Ajy Ulhisn Njwn Shortest cutting cycle: approx. 6 sec. Carriage travel: max. 400 mm Cutting speed: approx. 60 m/sec. Clamping force: up to 1100 N (adjustable) Saw blade diameter: 400 mm Dimensions: 1830 x 1000 x 1600 mm (LxWxH) Weight: approx. 500 kg Condition: used, as seen Accessories: New maintenance unit for compressed air New incremental encoder, incl. measuring wheel and connection cable for length measurement Note: The saw was in use at an education and research centre and therefore has very few operating hours.

Year of construction: 2024, condition: like new (used), functionality: fully functional, The Emmegi Rifila is a miter saw with a blade that moves from below, specifically designed for the precise cutting of aluminum profiles and sheets. Its robust construction ensures exact cuts with perfectly parallel profile sides. The machine can be equipped with roller conveyors to enable flexible use. The saw includes 2 new roller conveyors (see photos). - Precise cuts due to the stable machine structure - Versatile for use with profiles and sheets - Safety through an effective protective cover - Easy operation with an adjustable stop and scale - Carbide-tipped saw blade, Ø 350 mm - Max. after-cut height 120 mm - Protective device for the cutting area - Lubrication system with micro-spray device - Motor: Self-braking three-phase motor - Motor power: 1.5 kW - 2 roller conveyors Bodpfx Anjza Aafs Nswn

Condition: used, machine/vehicle number: 008177, Max. panel width: 4300 mm Bwodpex A Tamjfx An Njn Max. panel length: 4300 mm Main saw blade projection: 125 mm No of Grippers: 7

Condition: used, Year of construction: 1995, saw blade diameter 400 mm cutting diameter 130 mm saw blade turning speeds 30 / 60 U/min capacity 90 degrees: square 120 mm total power requirement 4,8 kW weight of the machine ca. 1,8 t Bodpjy Umcbsfx An Nown dimensions 1,4 x 1,2 x 2,3 m Semi-automatic Cold Circular Saw - Miter cutting - Micro-spray lubrication system - Safety guard - Emergency stop device

Condition: used, Year of construction: 2009, Sawblade tiltable 45 ° cutting width 95 × 60 mm Bwsdpfx Aoywnvnsn Non Motor output 1,3 kW bis 1,8 kW kW Saw blade diameter 315 mm Dimensions (L/W/H) 1100x900x1450 mm machine weight ab. 230 kg

Condition: used, Year of construction: 1992, saw blade diameter 450 mm Saw blade 50 mm capacity 90 degrees: round 150 mm capacity 90 degrees: flat 290x30 mm capacity 90 degrees: square 135x135 mm 0 - 1000 mm/min rapid return speed 1650 mm/min 0 - 30 ° dimensions of the machine ca. 1500x1200x1770 mm weight of the machine ca. 750 kg Bodpfxjyv N Nao An Njwn

Condition: used, Year of construction: 2003, saw blade diameter 300x32x2,5 mm capacity 90 degrees: round 10-90 mm capacity 90 degrees: flat 80x10-80 mm capacity 90 degrees: square 10-80 mm Cutting range at 90 degrees: round - solid materia 10 - 40 mm Cutting range at 90 degrees: flat - solid material 40x10-40 mm Cutting range at 90 degrees: square -solid materil 10- 40 mm turning speeds 1700/3400 U/min weight of the machine ca. 600 kg dimensions of the machine ca. 2590x1910x1910 mm Accessories: -Footswitch with emergency stop Bedpoyv Nvtjfx An Njwn -Micro spraying device -HM circular saw blade 350 mm