Used Saw Milling Long Hole for sale (22,231)

Condition: used, Year of construction: 2019, machine/vehicle number: IntNr231494, FANUC, high-performance computer series 31i-B5, Well maintained, approx. 9,000 operating hours Technical Main Data Working Range Max. bar diameter: 38 mm Max. machining length (with guide bushing): approx. 320 mm Machining without guide bushing possible (for shorter workpieces) Max. collet diameter at sub spindle: 38 mm Main Spindle Spindle power: approx. 11–15 kW Max. speed: approx. 7,000 rpm Integrated C-axis (0.001° resolution) High-precision spindle bearings for heavy-duty machining Sub Spindle Power: approx. 5.5–7.5 kW Max. speed: approx. 7,000 rpm Full-function C-axis Part transfer and rear machining in one setup Axis Configuration X1 / Z1 (main system) X2 / Z2 (sub spindle system) Y-axis for off-center milling operations C-axis on main and sub spindle Optional B-axis type swivel functions (depending on equipment) Multi-channel control enables simultaneous machining on main and sub spindle for significantly reduced cycle times. Tooling Tool holder set (non-driven) Guide bushing unit (pull system, JBS) Oil cooler unit High-pressure conveyor (with integrated high-pressure unit), type Müller combistream CS 3 Coolant: oil Weight: 6.25 t Dimensions (LxWxH): 3477x1860x1865 mm The machine can be inspected under power by appointment. Subject to changes and errors in technical data and specifications as well as prior sale! Gujdpfoy Rfv Ejx Agpjb

Condition: excellent (used), Year of construction: 1998, Haffner Door Lock Mortising Machine used, in good condition Manufacturer: Haffner Gedpfoyuty Ssx Agpsub Model: SL 100 Machine No.: 5372 Column-type machine Chain mortising unit Door support Workpiece support Spindle for lever hole Spindle for faceplate Lubrication device Extraction port D 80/100 mm Required space approx. 1200 mm x 700 mm x 2000 mm Weight approx. 300 kg Location: 54634 Bitburg Delivery in as-inspected condition, without warranty or guarantee

Condition: excellent (used), Bargain in excellent condition: panel saw and spindle moulder with tooling Gsdpfxsy Ni Ayj Agpsub

Condition: excellent (used), Panel Saw-Spindle Moulder KNAPP KFS Profi T -used- Sliding table saw with format sliding carriage, with outrigger table, tilt-adjustable circular saw, mitre and angle fence, tilt-adjustable spindle moulder, moulder spindle with reversible rotation (clockwise/counterclockwise), fine-adjustable moulder fence ----- Technical Data ----- Cutting length (sliding table): 2,000 mm Cutting height: 103 mm Cutting width: 700 mm Max. saw blade Ø: 315 mm Saw blade tilt range: 45° Spindle moulder diameter: 30 mm Spindle tilt range: 45° Spindle speeds: 2,850 / 4,000 / 7,800 rpm Saw extraction port: 120 + 40 mm Spindle extraction port: 120 mm Dimensions (LxWxH): 2,010 x 1,230 x 83 mm Weight: 590 kg Quality info: - All settings checked - Adjusted according to manufacturer specifications - Complete basic inspection - Thorough basic cleaning - Electrical system checked - Immediately ready for operation Godpfx Agoyyzqdepoub

Condition: like new (used), Year of construction: 2022, functionality: fully functional, feed length X-axis: 9,040 mm, feed length Z-axis: 200 mm, feed rate X-axis: 60 m/min, saw blade diameter: 700 mm, saw blade width: 5 mm, spindle speed (max.): 5,000 rpm, We are offering an HM-Z3 CNC crosscut saw and milling combination (year of manufacture: 2022). The machine is in excellent condition, has hardly been used, and can be considered virtually as new. Due to a change in our workflow, this machine has become redundant and is now available for sale. If you have any questions or require further information, feel free to send us a message or give us a call. Gujdpfx Aeyzpm Negpjb

Condition: new, Year of construction: 2025, Sawmill Viking VBS1400 Log bandsaw with double cut bandsaw blades. Cuts back and forth!!! Roller diameter: 1000mm Bandsaw blades: double-sided = 150mm wide, single-sided = 140mm wide Blade speed: infinitely variable, 0 - 45m/s Feed speed: 0-60m/min. Log diameter: up to 1400mm (max. 1600mm) Cutting length: 6m (up to 12m extension possible, not included) Saw head: 3500 kg Digital cutting thickness adjustment via CNC touch panel Manual control unit with joystick Gsdpfx Aey Rq Tcsgpsub Cutting view via green laser and video monitoring 30 kW saw motor Frequency converter 30kW - infinitely adjustable to regulate the saw blade speed for different types of wood Blok manipulation: Hydraulic Condition: New

Condition: new, Year of construction: 2025, operating hours: 1 h, SPECIAL OFFER !!! Guodpfxsy Rq Slj Agpeb Sawmill Viking VBS1100 SB(1) Condition: NEW! Log bandsaw with single-sided bandsaw blades. (Double cut, back and forth, possible for an extra charge!!!) Roller diameter: 950mm Bandsaw blades: double-sided = 160mm wide, single-sided = 140mm wide Feed speed: 0-60m/min. Log diameter: up to 1100mm Cutting length: 6m (up to 9m extension possible, not included) Total weight: 7500 kg Digital cutting thickness adjustment via CNC touch panel Manual control unit with joystick Cutting view via green laser (video monitoring with surcharge) 22 kW saw motor Infinitely variable feed speed (0 - 60 m/min) Block manipulation: Hydraulic Trimmers, wet grinders, band saw blades, circular saw blades, etc. can also be purchased from Droste Schärftechnik. (Not included)

Condition: new, overall weight: 4,500 kg, Year of construction: 2026, LONG REACH excavator arm 8m, 10m, 12m, 14m, 16m, 18m, 20m. 22m + BOAT POSSIBILITY OF PRICING FOR ANY MACHINE. POSSIBILITY OF PRICING FOR LENGTHS FROM 8M UP TO 22M BELOW OFFER FOR LONG REACH BOOM 16M FOR JCB JS 220 + BUCKET 0.6 M3 TECHNICAL SPECIFICATIONS Godpfx Aeua U Acsgpeub Material: S355 steel Length: 16 m Maximum reach: "forward": 15.5 m Maximum digging depth: 11.2 m Weight: ca. 4500 kg Dipperstick capacity: 0.6 m3 All pins are hardened (to increase hardness above 50 HRC) 1 bucket cylinder, 6 pipes, 4 hoses, 8 pins, 5 grease lines, 1 set of couplings Fabra: KAISAI brand (colour can be selected) Hose: GATES brand All pins are equipped with grease nipples All "pipes" are phosphated

Condition: excellent (used), Catalogue number 7757 TECHNICAL DATA Guedjymnbbepfx Agpeb Milling machine - Spindle diameter: 25mm - Spindle height: 120mm - Interchangeable spindle, tiltable 20 degrees - Spindle locking - Height adjustable (up/down) - Original guide fence - Table dimensions: 1120x750mm - 4 spindle speed settings - Motor: 3.8 kW Circular saw - Max blade diameter: 350mm - Spindle axis: 30mm - Blade adjustable (up/down and angle) - Spindle locking - Cutting width at fence: 540mm - Cast iron table - Dimensions (L/W/H): 1260x900x1000mm - Weight: 610kg ADVANTAGES – Made in Poland – DTR documentation available – Used milling machine, very good condition Net price: 6900 PLN Net price: 1640 EUR (based on exchange rate 4.2 EUR) (Prices may vary with exchange rate fluctuations)

Year of construction: 1991, condition: good (used), Underfloor circular saw, crosscut saw, pull saw, chop saw, sliding table saw, table saw, circular saw, panel saw -Manufacturer: Altendorf, sliding table saw type TKR 45 -Main motor: Bauknecht 5.5 kW with brake -Scorer motor: Emod 0.75 kW -Speed: 3000/4000/5000 rpm -Saw blade: Ø 300 mm / max. Ø 350 mm -Max. Cutting height: 90° 95 mm / 45° 70 mm Godpfjmydmbsx Agpeub -Miter cut: up to 45° -Cutting width: 2250 mm -Table length: 1400 mm -Dimension total 3480/1530/H1370mm -Weight: 1104 kg

Condition: used, functionality: fully functional, saw band length: 6,400 mm, saw band width: 1,300 mm, long cutting circular saw in good condition & operational 7.5 kW power 32 A Guedpfx Asycg Rajgpob

Condition: as good as new (ex-display), Year of construction: 2026, ST 3 classic F 23 - Combined sawing-routing machine With tiltable saw blade, tiltable milling spindle and format sliding carriage made of anodized aluminum Sturdy cast steel construction Large support surface and precise cast iron table High-precision format sliding carriage made of anodized aluminum (travel 2250 mm) Large extension arm (900 x 600 mm) with telescopic aluminum stop Max. Saw blade Ø 315 mm with scoring device, swiveling from 90°-45°. Saw parallel fence with fine adjustment Stable sawing unit and large dimensioned double cradle frame unit guarantee highest stability, precision, smooth running and long service life Solid and precise machine table made of stress-free cast iron 3 milling speeds, manually adjustable from 3.500 - 10.000 min-1 Gsdpfxjcnwyds Agpjub With right-left rotation of the milling spindle Standard arc milling protection hood Two 5.0 kW motors with high power reserves Cast iron milling unit top mounted on both sides precision ball bearings on top close to the lever point four optimally graduated milling speeds, enabling the grinding of workpieces Powerful motors Industrial motor, 100% duty cycle suitable for continuous use (full load) Scope of delivery: Curved fraise protection hood anodized aluminum format sliding carriage aluminum stop jaws folding stop jaws Technical data Dimensions cast iron worktable 1112 x 430 mm working length 2250 mm max. saw blade Ø with/without scoring 315 mm max. cutting height at 90°/45° 100/70 mm max. cutting width 2660 mm saw blade tilting 90° - 45° cutting width 900 mm speed 4000 1/min. table cutter - spindle tilting 90° - 45 useful length of spindle 100 mm max. tool Ø 210 mm max. tenon tool Ø 275 mm max. tool-Ø retractable 180 mm speeds 3.500/7.000/10.000 1/min. General - motor power 400 V/50 Hz/S6 40% 2 x 5,0 kW ( 6,6 PS) Weight 470 kg Suction nozzle-Ø 2 x 120 mm Suction nozzle-Ø saw blade guard 60 mm Location: Ex stock 54634 Bitburg - immediately available -

Condition: like new (used), Year of construction: 2025, GANNOMAT "JUNIOR 323" FRAME DOWEL AND SLOT MORTISING MACHINE Complete in standard configuration as per price list 01/22/D with: - Precision collet chuck for ER 40 collets Ø 3–26 mm, including collets Ø 10 / 13 / 16 / 20 - Motor 1.5 kW, 2800 rpm - Positioning via digital counter - Pneumatic 2-level positioning adjustment (0–100 mm) - Max. drilling depth: 150 mm - Precision indexing rail with 12 mm pitch, featuring: - Center detent and lateral adjustment 320 mm - 2 pneumatic safety clamping cylinders - Complete fence system consisting of: • 1 center stop and 1 stop for oversized frames • 1 round stop bar approx. 850 mm long (can be mirrored from left to right) • 2 flip stops - Tiltable slot mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) - Extraction hood Ø 80 mm, dust-tested - Central mitre stop 45° Godpfx Agsxdttispeub - Pair of auxiliary workpiece supports, pivotable (left and right) - Drill head holder - 3-spindle drilling head, 32 mm pitch (can be rotated 90°) - Chassis with 4 wheels for easy machine movement Availability: Short-term – immediately –

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, drilling depth: 1,600 mm, feed length X-axis: 3,000 mm, feed length Y-axis: 2,100 mm, feed length Z-axis: 1,500 mm, overall weight: 50,000 kg, feed rate X-axis: 10,000 m/min, feed rate Y-axis: 10,000 m/min, feed rate Z-axis: 10,000 m/min, spindle speed (max.): 4,500 rpm, drill diameter: 40 mm, table length: 2,100 mm, table width: 1,900 mm, CNC Heidenhain iTNC 640 AXES OF MOVEMENT Maximum drilling depth in a single operation (V axis): mm 1,600 Table travel, horizontal movement (X axis): mm 3,000 Vertical movement (Y axis): mm 2,100 Column approach movement (milling) (Z axis): mm 1,500 Drilling slide tilting (resolution 0.001°) (A axis): +30° / -15° Table rotation (resolution 0.001°) (B axis): 360° Max axis feed rate: mm/min 10,000 DEEP HOLE DRILLING AND MILLING SPINDLE – ISO 50 Solid drilling capacity: mm 5 – 25 Maximum drilling diameter: mm 40 Adjustable spindle speed: rpm 1 – 4,500 Spindle power S1: kW 17 Spindle torque: Nm 324 Standard drilling tool holder: mm Ø 25 x 70 Maximum internal spindle pressure: bar 120 Taper type: ISO 50 DIN 69871/A Coolant system: Yes ROTARY TABLE Rotary table dimensions: mm 1,900 x 2,100 Table rotation (resolution 0.001°) (B axis): 360° Table load capacity in rotation: kg 20,000 T-slots: mm 22 OIL SYSTEM Hydraulic pump motor power: kW 4 – 7.5 Self-regulated oil pressure: bar 15 – 120 Self-regulated oil flow rate: l/min 5 – 80 Oil tank capacity: L 800 – 1,000 Cooled oil temperature: 25 – 32 °C Filtration grade: micron 16 MACHINE DIMENSIONS AND WEIGHT Width x Length x Height: mm 7,000 x 7,900 x4,700h Machine weight: kg 50,000 DRILLING CAPABILITIES WITH GUN DRILLS Maximum depth: mm 1,600 Maximum rotation speed: rpm 4,500 Minimum drilling diameter: mm 6 Maximum drilling diameter: mm 40 THREADING HEAD “IMSASISTEM” WORKING FEATURES Max rotation speed: rpm 4,500 Maximum threading on C40 steel: M36 Gjdpfxeywnr Nj Agpeub Machine equipped with: • Remote electronic handwheel Heidenhain • ISO 50 tool changer magazine with 40 positions • Fume extraction system 4,000 m³/hour • Through-spindle air/oil system • M24 threads on table side • Various tools and equipment • Tool rack with assorted gun drills • User and maintenance manual and CE declaration of conformity

Condition: used, functionality: fully functional, machine/vehicle number: 106341-11, Year of construction: 2005, overall weight: 8,000 kg, total height: 2,700 mm, total length: 5,660 mm, total width: 3,956 mm, The drilling method of the deep hole drilling machine is single-lip drill deep hole drilling. Drilling Unit Information: - Number of spindles: 1 - Infinitely variable spindle speed: 300 – 8000 rpm - Spindle drive power: 7.5 kW - Max. drilling depth: 800 mm - Drilling diameter min/max: 3 – 25 mm based on ST 60 - Max. twist drilling: 25 mm - Max. thread tapping: M24x3 - Milling material removal rate: 150 cm³/min Travel Paths: - X-axis travel: 800 mm - Y-axis travel: 400 mm - Z-axis travel: 630 mm - W-axis travel: 800 mm Travel Speed: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 800 liters - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic system/equipment - 1x submersible pump: Pumping capacity: 200 l/min - 1x low pressure pump: Pumping capacity: 100 l/min Pump drive: 1.7 kW - 1x compact belt filter: Filtration capacity: 120 l/min for processing steel/non-ferrous metals - 1x radial piston pump with remote adjustment: Pumping capacity: 2 – 94 l/min Pump drive: 7.5 kW Spindle Unit: - Cartridge spindle design with drive housing and spindle drive with gearbox. Spindle bearing with precision angular contact ball bearings and lifetime grease lubrication. Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with HSK 50 tool holder Drill Bush Holder: - Design as 2-position turret with electric swivel mechanism - Locating position via Hirth coupling - Turret head with fixtures for: Gedpfx Asw E H E Rogpeub Guide bushes for deep hole drilling Milling and drilling spindle unit for conventional machining Pickup Tool Changer: - For conventional tools and drill bushings - Disc magazine design with 20 stations including feed stroke Automatic Tool Changer for Deep Hole Drilling Tools: - Fixed ELB column magazine for at least 5 tools including automatic tool clamping for HSK holders Clamping Table with W-Axis and NC Rotary Table: - Length/width: 800 x 600 mm - Positioning accuracy: B-axis +/- 30" - Centric payload: 1,500 daN Workpiece Clamping Device: - 1x tailstock with manual clamping movement - 1x NC dividing unit (A-axis) with manually operated two-jaw chuck for workpiece clamping - 1x base plate for mounting and clamping drill bushings + supporting prisms Electrical Equipment Information: - 1x CNC control Sinumerik 840D (digital complete system), including PLC S7-300 Connection Data: - Operating voltage: 3AC 400V ±10% – Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW

Year of construction: 2018, condition: refurbished (used), Flying cutoff unit TCC 120/168, made by OTO MILLS Recently revamped Complete flying cutoff unit including: Guedpfxjvtpp Ne Agpjb - Accelerator (carriage transmission) - Main carriage motor - Cutoff unit TCC120 with base with linear guides, cutting head, clamping unit and support for tube at exit side - Control panel RENEWED - Electrical cabinet RENEWED - Hydraulic group - Cable chain - All existing documentation, manuals, drawings Specifications: - Type of saw : Friction - Material thickness : 1 –6 mm - Standard tube length : 3 –12 m - Diameter range : 42 –168 mm - Square tubes : 40x40 –130x130 - Rectangular tube : 50x30 –180x80 - Max. speed : 120 m/min - Length tolerance : +/-2 mm Round tube diameter: 42 – 168 mm Square tube diameter: 40×40 – 130×130 mm Rectangular tube diameter: 50×30 – 180×80 mm Material thickness: 1 – 6 mm Tube length: 3 – 12 m Type of saw: Friction Length tolerance: +/-2 mm Max. speed: 120 m/min

Condition: good (used), Year of construction: 1990, functionality: fully functional, Paoloni TT20-I Circular Saw Milling Machine S/N 00005/90 Year of construction 1990 Manufacturer Paoloni Macchine S.p.A. Italy Saw blade diameter max 350 mm Aluminum carriage with V-guide carriage length 2.100 mm rip fence 125mm Support table up to 340cm Saw blade tiltable 45 degrees scoring unit 125mm, 1 HP Cutting height max 110mm Motor 5.5 HP Gjdjtq Ivlspfx Agpeub Speeds: 3000/4500 / 6000 Table milling machine Spindle diameter 30mm for tenon cutters Spindle stroke 180mm max table opening 340mm motor 5,5 HP 5 different speeds (adjustable with belt pulley) 2500-8500 RPM weight 1300 kg

Condition: new, Year of construction: 2026, I am selling this long-cut (shortening) saw. Suitable for cutting boards, prisms or large prisms. Gedsx Ut Iqspfx Agpsub Cutting length: 600 / 900 / 1200 mm Cutting height: 100 / 150 / 200mm Motor power: 7.5 / 11 / 15kW Disc diameter: 500 / 600 mm Disc feed mechanical using an electric motor. Individual parameters can be customized. Tables according to specification.

Condition: excellent (used), Year of construction: 2024, operating hours: 193 h, functionality: fully functional, travel distance X-axis: 7,200 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 340 mm, cutting width (max.): 335 mm, workpiece length (max.): 6,000 mm, milling spindle speed (max.): 6,000 rpm, section length (max.): 6,000 mm, TECHNICAL DETAILS - Profile Milling Machine Processing length: 7,200 mm Number of axes: 4 Control: eluCAM graphical, Windows XP user interface Workstations: 2 independently operating stations Turret tool changer: 8 tools, servo motor driven Tool holder: BT 30 Disc mill diameter: 180 mm Tool length: 150 mm (from point of attachment) Travel distances Travel X-axis: 7,200 mm (without end-face processing), 7,080 mm (with end-face processing) Travel Y-axis: 480 mm Travel Z-axis: 340 mm Rapid traverse X-axis: 60 m/min Rapid traverse Y-/Z-axis: 30 m/min Positioning accuracy: ±0.1 mm/m Spindle Milling spindle speed: 1 to 6,000 rpm Milling spindle power: 6.0 kW Supply Gedpfx Aswprmzogpoub Air connection: min. 7 bar Air consumption: 100 l/min Electric connection: 400 V, 3~, 50 Hz, 35 A EQUIPMENT two independent workstations with light barrier and camera system Non-swiveling inclined milling head for 2 tools, Er20A, up to 18,000 rpm Inclined milling head swiveling 4 × 90°, Er20, up to 22,000 rpm Inclined milling head non-swiveling for steel, Er20A, 1,554 rpm Fixed saw head i=1:1, for D=300 mm saw blade, suitable for 90° cross cuts Carbide saw blade Z=100, D=300 mm, cutting width 3.2 mm Tool holder i=1:3.86 for 18,000 min⁻¹, ER25 Cooling/lubricating unit for steel processing Disc milling holder BT30, D=16 mm Disc cutter D=92 × 6 mm, Z=14, D=16 mm, carbide teeth TECHNICAL DETAILS - Double Mitre Saw Max. cutting length: 6,000 mm Min. cutting length at 90°: 335 mm Min. cutting length at 45°: 335 mm Saw blade diameter: 420 mm Cutting angle (rotation): pneumatically adjustable 90° and 45° inside, intermediate angles and 22.5° acute manually adjustable with digital display Cutting angle (tilt): pneumatically adjustable 90° and 45° inside Saw direction: saw blades move from bottom to top Control Control type: E580/1 Length adjustment: automatic with positioning control Saw blade tilt: pneumatically automatic between 90° and 45° Positioning accuracy: ±0.1 mm/m Positioning: pneumatic locking Operating system: Windows Saw unit Speed: 2,800 rpm Power per motor: 4,000 W (5.5 HP) Saw blade cooling: available Air consumption per cycle without cooling: 40 l Air consumption per cycle with cooling: 64 l Supply Electric connection: 230/400 V, 3-phase, 50 Hz Air connection: 7 bar Dimensions and Weight Length: 7,550 mm Width: 1,600 mm Height: 1,450 mm Weight: 1,750 kg EQUIPMENT Automatically closing protective covers Electronic positioning of the heads with +/- 0.1 mm/m accuracy Digital angle display for manually adjustable special angles Pneumatically adjustable saw blade rotational and tilt angles Operation via Windows control with 8.4" display and handwheel Cooling system for saw blades included Saw unit with bottom feed for optimal cutting force

Condition: good (used), Longitudinal circular saw with max. 3 m cutting length Gsdpowumwfjfx Agpeub max. cutting width 0.5 m max. cutting height 100 mm motor 12 kW total length 5.8 m total width 1.55 m

Condition: good (used), Year of construction: 1995, max. cutting length 6200 mm max. cutting width 600 mm max. cutting height 170 mm Guedpfx Ajxiu Dtegpsb motor 11 kW

Condition: good (used), Year of construction: 2008, functionality: fully functional, power: 18 kW (24.47 HP), Still a very presentable longitudinal saw with a powerful 18.5 kW saw motor max. cutting length: 6.2 m max. cutting width: 0.45 m max. cutting height: 0.17 m with hold-down device with digital size display Guedpoy D Drxefx Agpob Ready for demonstration in the workshop.

Condition: used, Year of construction: 2003, saw blade diameter 510 mm cutting diameter 150 mm capacity 90 degrees: flat 450 x 150 mm capacity 90 degrees: square 150 mm turning speeds 29 / 58 m/min. total power requirement 4,2 kW Gujdpfx Agjyrhuropeb weight 1,55 t range L-W-H 1,8 x 1,7 x 1,7 mm Long-cut cold circular saw, semi-automatic - with miter adjustment left 50°, right 60° - digital cutting angle display - hydraulically adjustable feed speed - hydraulic workpiece clamping - 4 spare saw blades

Year of construction: 2010, condition: good (used), Double mitre saw DGS400 for 45° (frame) cuts with digital left stop. Drilling or dovetail milling machine T20NC for frame assembly. 4 motors at 1.1 kW. Speed: 26,500 rpm. Direction of rotation: right and left. Milling cutter / drill bit. Guedpfxsxxytxo Agpob

Year of construction: 2003, condition: reconditioned (used), longitudinal saw for cutting boards 4 meters main engine 400V, 7.5kW Guedpfx Ajhbp T Ssgpob - blade feed motor 400V, 2.2 kW - extending the pneumatic saw - working pressure 6bar - cutting length 4020 mm - cutting height approx. 170mm - machine length 5.5 m - machine width 1.6 m