Used Glue Spreader for sale (1,490)

Condition: good (used), Year of construction: 2013, operating hours: 6,405 h, load capacity: 5,000 kg, lifting height: 5,080 mm, fuel type: diesel, mast type: triplex, construction height: 2,500 mm, empty load weight: 6,037 kg, mileage: 6,405 km, - Three-way diesel forklift Bodezv D Dpepfx Aiwjww - Brand: Still (Germany) - Year of manufacture: 2013 - In good condition! - Capacity: 5,000 kg - Lifting height: 5,080 mm - Mast height (fully raised): 2,500 mm - 6,405 operating hours - Equipped with FREELIFT - SIDESHIFT and FORK SPREADER Watch the video on YouTube.

Condition: good (used), Year of construction: 2015, operating hours: 3,837 h, load capacity: 1,500 kg, lifting height: 4,920 mm, fuel type: electric, mast type: triplex, construction height: 2,160 mm, empty load weight: 3,000 kg, mileage: 3,837 km, - Electric three-wheel forklift - Brand: Still - Year of manufacture: 2015 - Only 3,837 operating hours - Capacity: 1,500 kg - Lifting height: 4,920 mm - Mast lowered height: 2,160 mm Bodpfx Aie Afy T Nswjww - Container forklift - Forks: 1,500 mm - FREE LIFT - SIDE SHIFT and FORK SPREADER - Watch the video on YouTube - Battery: 2015 - Includes charger - Automatic filling system - Video to follow

Condition: good (used), Year of construction: 2014, operating hours: 11,578 h, load capacity: 8,000 kg, lifting height: 4,450 mm, fuel type: gas, mast type: duplex, construction height: 3,580 mm, empty load weight: 15,290 kg, mileage: 11,578 km, - LPG forklift - Brand: Linde (Germany) - Year of manufacture: 2014 - Capacity: 8,000 kg Bsdpfx Aioynt Nasweww - Lifting height: 4,450 mm - Mast height (fully raised): 3,580 mm - Side shift fork spreader - DUO PALLET system - Four functions - Watch the video on YouTube

Condition: good (used), Year of construction: 2016, operating hours: 8,410 h, load capacity: 3,000 kg, lifting height: 4,500 mm, fuel type: electric, mast type: duplex, construction height: 2,920 mm, empty load weight: 5,000 kg, mileage: 8,410 km, - Electric double-mast forklift - Brand: Jungheinrich (Germany) - Year of manufacture: 2016 - 8,410 hours - Capacity: 3,000 kg - Lifting height: 4,500 mm - Mast lowered height: 2,920 mm - Equipped with a FORK SPREADER - SIDE SHIFT - Battery: 2016 Bwsdpfxoy R Aq To Aiwow - With external charger - Automatic filling system Watch the video on YouTube.

Condition: used, Year of construction: 2016, Industrial automatic edge banding machine SOLUTION XD KEY FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: A SINGLE "TOUCH" IS ALL IT TAKES TO OPERATE THE MACHINE STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE EDGE BANDING OF ROLL MATERIAL, STRIP EDGES AND SOLID WOOD EDGES GENERAL FEATURES Single-sided edge banding machine in left-hand version for edge banding of roll material and strip edges with all conventional hot melt adhesives. The base frame consists of a stable steel welded frame with higher rigidity, which provides optimal support for the installation of the processing units. The upper pressure beam consists of a thick-walled steel profile and a double trapezoidal drive belt, which is automatically positioned according to the panel thickness. Height adjustment with display on the upper pressure beam and on the operator panel. Manual workpiece feeding system with a large-sized work area and increased support surface facilitates the feeding of large workpieces. Adjustable infeed fence for two positions with automatic selection for processing with or without a pre-milling unit. Upper working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal support for precise referencing to the panel. All high-frequency motors are operated via frequency inverters. Each unit is equipped with its own inverter for optimal flexibility and improved machine production times. Protective hood for all units positioned after the glue application unit. Polycarbonate windows ensure a good view of the units during processing. Interior lighting of the hood. Protective hood with sound-absorbing material for lower noise emissions during operation. Spacer on the infeed fence allows the machine to be fed with the correct spacing. The spacing is automatically adjusted to the selected feed rate. Dust extraction port arranged on the pivoting control panel, positioned in the infeed area, is adjustable for ergonomic operation. The electrical system complies with current regulations. Electrical components are housed in a metal housing, attached to the machine frame and equipped with doors for easy access in case of maintenance. Standard voltage is 400 V EU 50 Hz (with neutral conductor). Material feed is via a feed chain with 80 mm wide chain plates made of rubberized nylon, for optimal guidance and high load capacity. The chain slides on 2 guides made of hardened and ground steel, one round and one flat guide, to guarantee straight feed and to protect against lateral displacement. Automatic chain lubrication. The amount of lubricating oil is optimized by the control system depending on the panels being processed. External support roller track positioned along the entire length of the machine; consisting of an extendable opening system up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCH PC control system for quick and easy execution of the main functions of the machine. Includes: – Processing of programs in Just in Time mode – Possibility of management via bills of materials – Possibility of management by Bodpfx Aijxy Tm Iswsww

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Specification: Feed Speed 814m/min Workpiece Thickness: 8-60mm Edge Material Coil: 0.4-3mm Edge Material Strip: 0.4-8mm Joint Trimming 2x2.2kw Workpiece Pre heating EVA Gluepot Airtec Unit AT15 Edge Magazine Pneumatically Driven pressure Roller Bjdpfx Ae Afxuljiweww End Trim Unit Chamfer/Straight Top & Bottom Trimming Unit with Pneumatic Adjustment Contour Trimming Unit Profile Scraping Unit with Quick Change Heads Glue Joint Scrapers Buffers CE

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 20,300 h, load capacity: 8,000 kg, lifting height: 12,500 mm, fuel type: diesel, mast type: duplex, construction height: 8,120 mm, power: 145 kW (197.14 HP), empty load weight: 30,900 kg, total length: 5,565 mm, drive type: Diesel, construction width: 3,380 mm, Empty container stacker Load center: 2540 Mast type: Duplex Transmission: ZF WG190 automatic Condition: Ready for operation and fully functional Technical condition: good Front tire type: Pneumatic Front tire size: 12.00-20 Front tire condition: 20 - 40% Rear tire type: Pneumatic Rear tire size: 12.00-20 Rear tire condition: 80 - 100% Bwedpfx Asz Rrayoiwsw 20-40ft side spreader, double stacking

Condition: used, functionality: fully functional, Year of construction: 2006, operating hours: 13,000 h, load capacity: 9,000 kg, lifting height: 16,000 mm, fuel type: diesel, mast type: triplex, construction height: 6,350 mm, power: 174 kW (236.57 HP), drive type: Diesel, Empty container forklift Load center: 1220 Mast type: Triplex Transmission: Clark/Dana 13.7HR 32335-630 Condition: Ready for use and fully functional Technical condition: normal Bwsdpoz Rra Tefx Aiwew Front tire type: Pneumatic Front tire size: 14.00-24 Rear tire type: Pneumatic Rear tire size: 14.00-24 20ft-40ft sidelift spreader with twistlocks

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 23,000 h, load capacity: 9,000 kg, lifting height: 15,500 mm, fuel type: diesel, mast type: duplex, construction height: 4,215 mm, power: 179 kW (243.37 HP), empty load weight: 44,200 kg, total length: 6,700 mm, drive type: Diesel, construction width: 4,150 mm, Empty container stacker Load center: 1220 Mast type: Duplex Transmission: ZF WG210 automatic, 4/3 gears Condition: Ready for use and fully functional Technical condition: normal Bwodps Afq Evjfx Aiwjw Front tire type: Pneumatic Front tire size: 14.00-24 Front tire condition: 20 - 40% Rear tire type: Pneumatic Rear tire size: 14.00-24 Rear tire condition: 40 - 60% Elme 594ND 20-40ft sidelift spreader, double stacking 6+1 HC high stacking

Condition: new, Year of construction: 2024, Drying and Burn-in Furnace TRO, Model I For drying racks with max. 50rods, useable size 60x90cm, outer dimensions: approx. 2290mm wide x 1390mm deep x 2230mm high, useable space: approx. 1400x1070x1660cm. Suitable for vaporisation of low amounts of solvent, authorised for inks and solvents up to hazard class A II, according to safety requirements DIN EN 1539. Equipped with control of the minimum exhaust volume and a heating system in regard to the exceedance of the max. temperature. Fixing and drying temperature: up to max. 180°C. Power connection: 400V/50Hz, 21kW, weight: approx. 650kg, varnishing: corps RAL 7035 (light grey), doors RAL 7037 (dust grey). Special varnishing upon request. Bwodpfod I T Exex Aiwjw Chamber dryer, all-steel construction, with good thermal insulation. Simple insertion of drying racks by means of easy-to-open wing doors. The air is sucked out of the drying chamber by ventilators, is blown through thermostat-controlled heating registers and re-fed temperature-controlled to the drying chamber. The solvents released during the drying process are dissipated from the exhaust side of the ventilator while supply air gets into the drying chamber. The horizontal air guide in the drying chamber guarantees an even temperature control. The required temperature can easile adjusted via actual and nominal value thermostat. Overheating protection by safety thermostat. Particularly suitable for fixing and drying of textile inks, flock glues as well as for burning-in of plate and aluminium signs up to 180°C. - Various drying racks for different applications available. - We recommend the installation of a gas warning unit. Delivery time 10-12 weeks. ATTENTION: Not permitted for solvents! Not permitted for foods!

Condition: used, mileage: 57,594 km, power: 110 kW (149.56 HP), first registration: 11/2018, fuel type: diesel, empty load weight: 3,070 kg, maximum load weight: 3,430 kg, overall weight: 6,500 kg, axle configuration: 4x4, wheelbase: 2,400 mm, brakes: other, color: orange, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 2, loading space length: 2,000 mm, loading space width: 1,600 mm, loading space height: 400 mm, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, differential lock, onboard computer, soot filter, trailer coupling, * German vehicle * First owner * Documentation available * Only 2,054 operating hours * Original 57,594 km * 4x4 all-wheel drive * EURO 6 * 90 km/h approval * Condition: see photos * Three-sided tipper body * Loading area: Length 2,000 mm x Width 1,600 mm x Height 400 mm * Aluminum loading flaps * Steel floor with lashing eyes * Trailer coupling with electrical and hydraulic connections * Trailer load 3,500 kg * Municipal plate/work platform, hydraulically adjustable, with electrical and hydraulic connections * Joystick control * Winter service lighting * Snowplow, salt spreader, broom, and various attachments available at extra cost * Cab with 2 comfort seats, air-suspended * Air conditioning * Differential lock * Rotating beacon * Radio CD * Work lights * Wheelbase (mm) 2400 * Gross vehicle weight (GVW) 5,000 kg * Unladen weight 2,370 kg * Payload 2,630 kg * If sold to commercial businesses and for export (non-EU and EU), the German commercial law applies. Bwjdpfx Ae Agpfdeiwow If a new TÜV (technical inspection) is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does NOT include a new TÜV inspection, a new DGUV (German Social Accident Insurance) certificate, a new SP (safety report), or a new UVV (accident prevention regulations) certificate. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish Note: We strongly recommend and offer a viewing and inspection of the goods so that the buyer does not have any false impressions about the condition and suitability. Viewings and inspections are possible and expressly desired at any time by appointment. All information is without guarantee. We are not liable for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.

Condition: used, mileage: 57,594 km, power: 110 kW (149.56 HP), first registration: 11/2018, fuel type: diesel, empty load weight: 3,070 kg, maximum load weight: 3,430 kg, overall weight: 6,500 kg, axle configuration: 4x4, wheelbase: 2,400 mm, brakes: other, color: orange, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 2, loading space length: 2,000 mm, loading space width: 1,600 mm, loading space height: 400 mm, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, differential lock, onboard computer, soot filter, trailer coupling, * German vehicle * 1st owner * Documentation available * Only 2,054 operating hours * Original 57,594 km * 4x4 all-wheel drive * 90 km/h approved * EURO 6 * Condition: see pictures * Three-way tipper body * Load area: Length 2,000 mm x Width 1,600 mm x Height 400 mm * Steel floor with lashing points * Aluminum tailgate * Municipal plate/work platform, hydraulically adjustable with electrical and hydraulic connections * Tow hitch with electrical and hydraulic connections * Towing capacity 3,500 kg * Winter service lighting * Snowplow, salt spreader, broom, and various attachments available at an extra cost * Cab with 2 comfortable, air-suspended seats * Air conditioning * Joystick control * Differential lock * Radio CD * Work lights * Rotating beacon * Wheelbase (mm) 2400 * Gross vehicle weight (GVW) 5,000 kg * Unladen weight 2,370 kg * Payload 2,630 kg * If sold to businesses and for export (non-EU and EU), the German commercial law applies. If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does not include a new TÜV inspection, a new DGUV, a new SP, or a new UVV. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish. Note: We strongly recommend and offer the opportunity to inspect and examine the goods, so that the buyer does not have any false impressions about the condition and suitability. Inspection and examination are possible and expressly desired at any time by appointment. All information is provided without guarantee. We are not liable for any errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to change, prior sale and errors. Bodpfxs Agpfhe Aiwsww

Condition: good (used), Year of construction: 2019, operating hours: 2,749 h, load capacity: 2,000 kg, lifting height: 6,130 mm, fuel type: electric, mast type: triplex, construction height: 2,610 mm, empty load weight: 4,000 kg, mileage: 2,749 km, - Electric three-wheel forklift - Brand: Still - Year of manufacture: 2019 - 2,749 operating hours - Capacity: 2,000 kg - Lifting height: 6,130 mm - Mast height (lowered): 2,610 mm Bedpfxez Rzzme Aiwoww - Side shift and fork spreader - Free lift - Fork length: 1,200 mm - Battery: 2019 - Includes charger - Automatic filling system - Watch the video on YouTube

Condition: ready for operation (used), functionality: fully functional, mileage: 53,179 km, power: 55 kW (74.78 HP), first registration: 03/2019, overall weight: 3,500 kg, fuel type: diesel, color: orange, axle configuration: 4x4, maximum load weight: 1,699 kg, empty load weight: 1,900 kg, next inspection (TÜV): 10/2028, fuel: diesel, driver cabin: other, gearing type: hydrostat, emission class: euro5, loading space volume: 1.3 m³, operating hours: 7,381 h, number of seats: 1, number of previous owners: 1, machine/vehicle number: ES1785-2, Equipment: additional headlights, air conditioning, all wheel drive, hydraulics, low noise, soot filter, Hako Citymaster 1600, first owner, in top condition Bjdpfx Aiezk Ukieweww formerly a municipal/authority vehicle registered as a self-propelled working machine (40 km/h) upon request, we will perform a major engine inspection including timing belt, water pump, oil, and filters free of charge at the time of sale. 4297 sweeping operating hours 7381 total operating hours 53179 kilometers 4x4 all-wheel drive - hydrostatic all-wheel drive including Kif snowplow, type CM 1600, 1500 mm wide (like new/never seen snow) or alternatively with Kif front sweeper, type CM 1600, 1.300 mm wide, built in 2019 (like new/never seen snow), not shown in the pictures including Gmeiner salt spreader, type Husky 500V FS with support legs (like new/used twice for testing) like-new mixed bristle brush new water spray nozzles external controls for the sweeping material container rearview camera and suction shaft camera sweeping width up to 2270 mm sweeping material container made of stainless steel wheelbase 1600 mm track width 1055 mm fresh water tank 180 liters unladen weight approx. 1900 kg permissible total weight 3500 kg length: 4510 mm / width: 1210 mm / height: 1970 mm driving speed 0-40 km/h working speed 0-24 km/h noise reduction package engine: water-cooled 4-cylinder VW industrial diesel engine fuel tank approx. 60 liters hydrostatic all-wheel drive 2-circuit high-pressure hydraulics, circuit 1 (front) 0–50/0–70 l/min - 225 bar, circuit 2 (rear) 0–20/25/30 l/min - 195 bar hydraulic service brake via foot pedal cabin with air-sprung comfort driver's seat air conditioning / heating water treatment system hydrant connection dosing system other applications possible through additional attachments from HAKO, such as sweepers, snowplows, and lawnmowers (not included in the scope of delivery) errors, changes, and prior sale reserved We sell exclusively according to our general terms and conditions and exclude any warranty. Errors, changes, and prior sale reserved. We are available Monday to Friday from 9:00 a.m. to 5:00 p.m. We are also available on Saturdays by appointment. Telephone appointments can be arranged outside of these opening hours. We will gladly accept your current used equipment/vehicle in part exchange. Sales to commercial enterprises and exporters are given priority; this applies to our entire vehicle stock. The above information is not binding. Errors/changes and prior sale are subject to change!

Condition: used, mileage: 34,000 km, first registration: 07/1995, empty load weight: 4,350 kg, maximum load weight: 7,500 kg, axle configuration: 2 axles, fuel: diesel, gearing type: mechanical, emission class: euro1, suspension: steel, load capacity: 3,150 kg, Salt spreader + blade Brush cutter Rotating beacon Bwedpo Af Tzisfx Aiwsw

Condition: new, Year of construction: 2026, The Hebrock K 36 Top model with motorized adjustment – a new machine. This Hebrock bestseller offers unprecedented possibilities. Developed for the highest standards, the K 36 stands for absolute reliability and productivity in daily use. By enabling the machine to be equipped with a stepped cutter and a multi-radius trimming cutter, Hebrock sets new standards in the field of perfect edge finishing for various edge thicknesses. Max. edge thickness: 3 mm Max. workpiece thickness: 60 mm Ready for operation in 6 min. Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 – 60 mm Min. workpiece length: approx. 140 mm Feed speed: approx. 15 m/min Ready for operation: approx. 6 min Max. power consumption: approx. 7.4 kW Electrical connection: 400 V – 3 phases – 50 Hz Work table height: approx. 900 mm Machine dimensions: approx. 5250 x 1230 x 1430 mm (L x W x H) Weight: 1750 kg Equipment: Hebrock K 36. - 15 m/min Bjdpfx Aji Am Ukoiweww Edge banding machine K36 With PLC control (incl. 15'' touchscreen), hot melt adhesive application to the workpiece for edge material up to 3 mm; trimming cutter (incl. diamond tool) up to 3 mm cutting depth, maintenance-free, coated glue tank with interchangeable tank preparation including glue discharge device, high-frequency double-motor trim saw station (approx. 12000 rpm), high-frequency milling station (approx. 12000 rpm) with pneumatic milling adjustment and interchangeable cutter (combination design), corner rounding cutter, radius trimming cutter, flush trimming cutter (incl. pneumatic retraction device), cleaning station, robust chain drive, ball-bearing double roller pressure, unit sight window from the machine rear and operator side, signal lamp for workpiece sequence, pull-out workpiece support, feed speed approx. 15 m/min, edge banding up to 60 mm workpiece thickness 36/08/1 Quick-change preparation for corner cutter 36/08/2/1 additional interchangeable motor for corner cutter R=1 36/09/1 Multi-radius trimming cutter 36/24/1 Release agent spray device 36/24/2 Cleaning agent spray device 36/25 Edge protection spray 36/27 Nesting (1x milling station + 1 x radius trimming cutter) 36/30 Pneumatic 3-point adjustment 36/30/1 Multi-tool for high-frequency milling station (R2/R1/chamfer) 36/45 Axis package Motorized adjustment for panel, edge thickness, and trimming cutter depth adjustment Location: in stock, 54634 Bitburg Available upon agreement.

Condition: used, Year of construction: 2018, Used Machine Bwjdpfx Aiezk Nmrjwew Year of Manufacture: 2018 Special Feature: Machine with a gluing height of up to 100 mm! Condition: Factory-inspected by Lange Maschinenbau Features and Technical Specifications: - Machine table with 13 rollers for improved workpiece guidance - Edge feed, synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with blade (for cutable edges) - Three pressure rollers - Belt feed: - 0.25 kW - Approx. 1,250 mm long - Approx. 6.0 m/min - 50 mm wide toothed belt with a thick, workpiece-protective rubber covering - Digital counter for height adjustment - Direct glue application to the workpiece: Leak-proof glue tank with glue supply from below and fast heat-up time after machine shutdown - Flush trimming unit: - for the front and rear edges of the workpiece - Automatic sensing of the workpiece - Pneumatic trimming with a blade for cut-ready edges - Flush milling unit - With vertical sensing and horizontal guidance - Reproducible adjustment via digital counters - 2 powerful 0.4 kW high-frequency motors - Continuously adjustable from 4,000 to 18,000 rpm - Milling cutter: 70 mm, Z4, radius 2 mm/15° - Central exhaust port: 100 mm - 2 chip extraction hoods with 60 mm hose - Automatic height adjustment of the upper router bit via the belt feed - Continuous workpiece support, approx. 1,800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable film plate: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10–100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4–2.0 mm - Roller cutting: max. 1.0 × 55 mm, 2 × 45 mm - Glue pot heating power: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400 V, 50 Hz, 3-phase N - Total power consumption: 3.8 kW - Pneumatic connection: 6 bar Dimensions (without film tray): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 6,857 h, load capacity: 7,000 kg, lifting height: 9,120 mm, fuel type: diesel, mast type: simplex, empty load weight: 22,180 kg, total length: 5,595 mm, drive type: Diesel, construction width: 2,540 mm, Empty container stacker Load center: 1220 Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tire type: Pneumatic Front tire size: 12.00-20 Rear tire type: Pneumatic Rear tire size: 12.00-20 Description: In addition to this Kalmar model, we have approximately 200 heavy-duty forklifts, compact forklifts, reach trucks, and side loaders in our Hamburg and Gdansk warehouses. Visit our website - sago-online. Lease purchase and financing options at favorable terms are available at any time. We are also happy to purchase your used equipment outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this DCE70-32E3. Bwodjz Ewggepfx Aiwew P.S.: Our forklift master workshop specializes in repair, refurbishment, overhaul, and custom modifications for forklifts from 8 tons upwards. We would also be happy to offer your vehicle for consignment sale at our location. Side shifter, ELM spreader 20-40 container Heater, full cab,

Condition: new, Year of construction: 2025, The Hebrock F 2 Bwedpfslht Hzjx Aiwjw The 3.3 m long F 2 is not only attractively priced and space-saving. It also features the equipment you need to process edges perfectly from the start: diamond-tipped joining cutters guarantee excellently prepared workpieces for edge banding. The equipment includes a joining unit (up to 2 mm cutting depth), the top-mounted quick-heating glue tank, a mitre saw, and a combination milling machine. Optionally, the F 2 can also be equipped with a surface scraper blade. Maximum edge thickness: 3 mm Maximum workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: F2 - 10 m/min Edge banding machine F2 next With PLC control (including touchscreen) and hot melt glue application to the workpiece for edge material up to 3 mm; joining cutter (including diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with interchangeable tank provision including glue outlet device, HF mitre saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable plate milling cutter (combination version), robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, pull-out workpiece support, feed rate approx. 10 m/min. F2/10 carriage F2/30 pneumatic 3-point adjustment (radius, bevel, flush milling)

Condition: like new (used), Year of construction: 2014, operating hours: 10,000 h, load capacity: 8,000 kg, lifting height: 3,750 mm, fuel type: electric, mast type: duplex, construction height: 3,050 mm, Manufacturer + model: KALMAR ECF 80 / 9 * Mast: 2F3750 ID: 26082.8386 Category: Used Mast: 2F3750 Lowered height: 3050 mm Lifting height: 3750 mm Capacity: 8000 kg Year: 2014 Hours: 10000 hours Capacity: 80v / 1550ah Options: Equipped with: - FULL cabin - Air conditioning - Central lubrication system - Joystick control for forward/reverse Bwjdszv Rr Tepfx Aiwjw - Spreader / S.s. - Complete street lighting !! - 2 x Blue spot lights - LED floodlight - Duplex FFL mast - Complete NEW -> FEM 4 A - FORKS - Camera Non-marking tires

Condition: good (used), Year of construction: 2017, operating hours: 7,831 h, load capacity: 1,600 kg, lifting height: 3,375 mm, fuel type: electric, mast type: duplex, construction height: 2,160 mm, empty load weight: 3,000 kg, mileage: 7,831 km, - Electric duplex forklift - Brand: Still - Year of manufacture: 2017 - 7,831 operating hours Bwjdpfx Aiez Rphzswew - Capacity: 1,600 kg - Lifting height: 3,375 mm - Mast height: 2,160 mm - Container forklift - FREELIFT - SIDESHIFT and FORK SPREADER - Fork length: 1,200 mm - RADIO - Battery: 2015 - Includes charger - Automatic filling system - Watch the video on YouTube

Condition: used, power: 154 kW (209.38 HP), color: other, Year of construction: 2019 Number of cylinders: 6 Bsdpfs Adz Ryjx Aiweww Empty weight: 35.600 kg Dimensions (LxBxH): 200 x 110 x 100 cm Track width: 8 cm Quick coupler system: Yes Serial number: HCMDDQ5XT00030547 Hour meter reading: 1,877 H Engine power: 210 kW Number of cylinders: 6 Operating weight: 35,600 kg Track width: 800 mm Bucket dimensions: 2,000 x 1,100 x 1,000 mm Triple excavator arm Additional hydraulic lines Quick-change system Key included Remarks: Signs of wear Overall dimensions: approximately 9,000 x 3,400 x 3,300 mm Online auction of agricultural, earthmoving, and landscaping equipment, including the FENDT 720 Vario, 828 Vario and Favorit 816 Turboshift tractors, NEW HOLLAND T7.260 and T8.420 tractors, MASSEY FERGUSON 9S.425 EX/DYNA-VT tractor, JOHN DEERE 6210R and 7280R tractors, PÖTTINGER Novacat V10000 ED CL rotary mower, JOHN DEERE T560i combine harvester, CLAAS Quadrant 2200RC baler and Rollant 455 RC UNIWRAP baler-wrapper combination, HITACHI Zaxis 160 LC-3 / 180 LC / 300 LC / 350 LC excavators, HITACHI ZW180-6 wheel loader, SCHAEFF / TEREX TW95 tracked excavator, GEHL AL750 wheel loader and RT105EU skid-steer loader, FAUN AFT 50-3 mobile telescopic crane, XCMG XGA16E articulating boom lift, JLG aerial work platforms, RECORD P33T dump truck, KUHN HR6004 rotary harrow, LEMKEN Polaris fertilizer spreader, AMAZONE and KVERNELAND precision seeders, GREENTEC HS252 hedge trimmer, UNI CARRIERS reach trucks, MITSUBISHI electric pallet trucks, AGRINOVA scarifiers, FERRARI garden tractors, STIHL and AMBROGIO robotic mowers, and various other agricultural, construction, gardening, and warehouse machines, etc. The online auction opens Tuesday 20 October and closes Tuesday 17 November. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 17 November Pickup days are on: - Tuesday 24 November - Thursday 26 November Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: refurbished (used), Year of construction: 2014, Used Machine Year of manufacture: 2014 Condition: The machine has been factory-overhauled by Ganner Features and Technical Specifications: Complete standard configuration including: - Support with linear guide consisting of: 1 single-spindle horizontal drilling unit, 0.65 kW motor, 70 mm stroke Tool speed selectable via operator software (3000/5000/8000 rpm) 1 blow-out, gluing, and dowel-driving station for dowels Ø 8 mm, dowel length 25–50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC-controlled, with working length 1300 mm, travel speed max. 105 m/min. - Z-axis manually adjustable via mechanical digital counter, position adjustable via support table 5–40 mm - Dowel drive-in overhang adjustable from 7–20 mm via a mechanical digital counter; drilling depth from 0–35 mm (for drill bit length GL 70 mm) is automatically adjusted with the drive-in overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GLUE/WATER selector switch for flushing the glue system, each with: 1 stainless steel tank for 7.5 kg of glue and 7.5 l of water Bwedpfx Ajzlbrvsiwsw - Indicator light showing remaining glue levels in the glue tank - 1 left side stop, 1 right side stop, and 1 center stop (all removable) - 4 start buttons for individual processing of 1–4 workpieces - 4 pneumatic 10° angle clamping cylinders for workpiece thicknesses up to 80 mm, workpiece length (Y) min. 70 mm - 1 extraction funnel, connection Ø 80 mm - 1 TCT control unit with: Built-in industrial PC, including Beckhoff TWINCAT soft PLC, operating temperature range 0–50°C, 15-inch capacitive TFT industrial touchscreen, operating system: WINDOWS 7 - Programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE, or GRID dimensions, automatic workpiece mirroring and operation optimization, 4 work areas assignable to different programs, graphical workpiece display, parametric programming, zero-point offset, programmable worklists, error diagnosis with plain text Optional equipment: - 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle - 1 Z-axis with NC-controlled, dynamic positioning for height adjustment of the drilling and dowel-driving station (programmable from 5–40 mm), travel speed max. 30 mm/sec. - 1 single-spindle vertical drilling unit drilling from the TOP, 0.65 kW, (3000/5000/8000 rpm), position (Y) manually adjustable via a mechanical digital counter from 5–40 mm, drilling depth (Z) max. 30 mm (with drill bit length GL 57 mm), Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (including drilling depth compensation, e.g., for Häfele Minifix) - 4 vertical 10° angle clamping cylinders with mount - 1 keypad with mount Availability: available shortly Location: DE-63934 Röllbach

Year of construction: 2015, condition: excellent (used), Ref: 11161 . 2015 Pack-Smart IPF 30-27-4 Integrated Finishing System Ideal for direct mail, gift card and security packaging, media packaging, tipping, windowing, folding, gluing and other specialist print-finishing applications. Equipped with: Rotary vacuum paper feeder Precision product alignment & registration Dual servo-driven vacuum transport conveyors Twin-head hot melt glue system Servo-driven cold glue pattern system Scoring / perforating module Front fold tooling 3 x plow fold stations Turnover / straight-through module Transfer conveyor Shingled delivery conveyor 10-axis servo control system 10" colour touchscreen HMI Recipe storage & recall Integrated vacuum system Interlocked safety guarding Specification: Maximum production speed: 12,000 products per hour Maximum conveyor speed: 122 m/min Carrier size: 102–762 mm wide x 102–813 mm long Stock: 145 gsm up to 0.86 mm thickness Secondary rotary pick & place feeder Bsdpfx Aisz Iz Sfowsww Secondary product size: 54 x 54 mm to 150 x 150 mm Secondary feeder speed: up to 500 products/min Electrical: 230V / 3Ph Air requirement: 4.1–7 bar

Condition: used, New: Yes Bsdpfxsz S Ekbs Aiwjww Year of construction: 2023 Cargo space capacity: 41.000 l