Used Glue Spreader for sale (1,488)

Condition: used, Year of construction: 2000, 220V, 1 phase, 50Hz Air connection: 6 bar Complete in standard design with: - Dowel feed via electronic vibratory feeder - Automatic dowel length and dowel diameter control - Fully automatic electronic control with program selector switch GLUING – APPLYING – INSERTING - 8-stage glue quantity selector switch via time pre-selection by electronic control Bsdpfxozktq Io Aiwoww - Closed glue system with 6 bar glue pressure via glue nozzle for glues with a viscosity of 150 to 350 mPas - Selector switch GLUE/WATER for rinsing the glue system - Control lamp for displaying the remaining glue quantity in the glue container - 1 stainless steel container for 5 kg of glue and - 1 stainless steel container for 5 liters of water for rinsing including 1 gun for dowels Ø mm, dowel length 25 - 50 mm, pre-set to 35 mm, insertion overhang 7 - 20 mm Location: Nattheim

Condition: used, Year of construction: 1995, Max. veneer thickness: 3.0 mm Gluing system: glue application roller with roller heating Disc: Yes, for transporting the veneer across the veneer table. Machine type: stationary Feed rate: 5 - 15 m/min Bwsdpfx Aozkh S Hsiwsw Feed type: stepless Stand overhang: 950 mm Working height or feed table height: 940 mm Description: The glue is applied from below; the outer side of the veneer is always visible, with automatic thickness and tolerance compensation. Approximate weight: 400 kg Dimensions: 1700 x 900 x 1550 mm Motor power: 0.8 kW Storage location: Nattheim

Condition: used, Year of construction: 2016, Industrial automatic edge banding machine SOLUTION XD KEY FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: A SINGLE "TOUCH" IS ALL IT TAKES TO OPERATE THE MACHINE STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE EDGE BANDING OF ROLL MATERIAL, STRIP EDGES AND SOLID WOOD EDGES GENERAL FEATURES Single-sided edge banding machine in left-hand version for edge banding of roll material and strip edges with all conventional hot melt adhesives. The base frame consists of a stable steel welded frame with higher rigidity, which provides optimal support for the installation of the processing units. The upper pressure beam consists of a thick-walled steel profile and a double trapezoidal drive belt, which is automatically positioned according to the panel thickness. Height adjustment with display on the upper pressure beam and on the operator panel. Manual workpiece feeding system with a large-sized work area and increased support surface facilitates the feeding of large workpieces. Adjustable infeed fence for two positions with automatic selection for processing with or without a pre-milling unit. Upper working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal support for precise referencing to the panel. All high-frequency motors are operated via frequency inverters. Each unit is equipped with its own inverter for optimal flexibility and improved machine production times. Protective hood for all units positioned after the glue application unit. Polycarbonate windows ensure a good view of the units during processing. Interior lighting of the hood. Protective hood with sound-absorbing material for lower noise emissions during operation. Spacer on the infeed fence allows the machine to be fed with the correct spacing. The spacing is automatically adjusted to the selected feed rate. Dust extraction port arranged on the pivoting control panel, positioned in the infeed area, is adjustable for ergonomic operation. The electrical system complies with current regulations. Electrical components are housed in a metal housing, attached to the machine frame and equipped with doors for easy access in case of maintenance. Standard voltage is 400 V EU 50 Hz (with neutral conductor). Material feed is via a feed chain with 80 mm wide chain plates made of rubberized nylon, for optimal guidance and high load capacity. The chain slides on 2 guides made of hardened and ground steel, one round and one flat guide, to guarantee straight feed and to protect against lateral displacement. Automatic chain lubrication. The amount of lubricating oil is optimized by the control system depending on the panels being processed. External support roller track positioned along the entire length of the machine; consisting of an extendable opening system up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCH PC control system for quick and easy execution of the main functions of the machine. Includes: – Processing of programs in Just in Time mode – Possibility of management via bills of materials – Possibility of management by Bodpfxsxy Tm Is Aiwoww

Condition: used, Year of construction: 2023, Special price – Showroom machine Garbsen INDUSTRIAL AUTOMATIC EDGE BANDING MACHINE stefani md (the images of the machine are not binding with regard to the actual features specified below) KEY FEATURES EDGE BANDING OF SOLID WOOD UP TO 15 MM THICKNESS: SIMPLE AND FUNCTIONAL PROCESSING OF EDGES WITH LARGE DIMENSIONS "SGP" GLUE TANK: USE OF EVA AND POLYURETHANE GLUE FOR A PERFECT GLUE JOINT "STARTOUCH" CONTROL: A TOUCH IS ALL IT TAKES TO OPERATE THE MACHINE GENERAL FEATURES Automatic single-sided edge banding machine for applying edge banding with hot melt adhesive to the four sides of straight panels and for subsequent finishing. Machine frame and longitudinal supports made of cold-rolled steel in a box construction, manufactured in a single element, for high rigidity and vibration-free operation to accommodate the working units. Openings with slides for discharging any remaining chips to the floor. Upper pressure beam made of thick-walled steel construction and with columns made of cast iron, for a vibration-free structure where the working units are attached. Pressure rollers on the feed chain in a double row, made of rubber with a high coefficient of friction and with sliding on bearing rollers. Device to protect the pressure rollers from any remaining chips. Electronic adjustment of the upper pressure unit, depending on the panel thickness. Upper working units attached to the pressure beam or mechanically connected to ensure automatic adjustment when changing the panel thickness. Lower working units attached to the machine frame or to the longitudinal support, for a precise reference to the panel. All high-frequency motors are operated via frequency inverters. Protective cover for all units positioned after the gluing unit. Windows made of polycarbonate ensure a good view of the units during processing. Interior lighting of the cabinet. Protective cover with sound-absorbing material for lower noise emissions during processing. The spacer on the infeed guide allows the machine to be fed in the correct spacing. The spacing is automatically adjusted to the selected feed speed. Extraction nozzle arranged on the soundproof hood. Swivel control panel in an ergonomic position at the machine infeed. The electrical system complies with current regulations. Electrical components housed in a metal housing, attached to the machine frame and provided with doors for convenient access during any maintenance work. Panel feed The panel feed is carried out via a feed chain consisting of rubber sliding blocks with a high coefficient of friction, attached to a 1-1/4" industrial chain. The chain slides on 2 guides made of hardened and ground steel, a round guide and a flat guide, to guarantee a straight feed and protect against lateral displacement. Automatic lubrication of the chain. The amount of lubricating oil is optimized by the control system depending on the panels being processed. Support roller track externally and positioned along the entire length of the machine; consisting of an extendable opening system with sliding on linear bearings and plastic sliding rollers with steel pivot pins. "STARTOUCH" CONTROL Main features: 12" touchscreen color display Graphical representation of all processing units and their status (on/off) Bwedpfx Aiezc Ilxswew

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Bedpsxwaz Hsfx Aiwsww

Condition: excellent (used), functionality: fully functional, machine/vehicle number: B114, Year of construction: 2017, operating hours: 25,000 h, load capacity: 42,000 kg, lifting height: 15,100 mm, fuel type: diesel, mast type: other, motor manufacturer: VOLVO, gearing type: automatic, front tire type: pneumatic tires (air-filled), front tire size: 18.00x25, rear tire type: pneumatic tires (air-filled), rear tire size: 18.00x25, overall weight: 78,000 kg, empty load weight: 66,840 kg, color: blue, Equipment: 3rd hydraulic function, air conditioning, cabin, centralized greasing system, front guard, full service history, hydraulically sliding cabin, lighting, seat heater, sideshift, # Kalmar DRG420-60S5 Reach Stacker for Sale – 2017 Price: €169,000 excl. VAT (negotiable) We are offering a used Kalmar DRG420-60S5 reach stacker, manufactured in 2017, with 24,750 operating hours and a maximum lifting capacity of 42 tonnes. The machine has been operated at our intermodal terminal in Szamotuły, Poland. It has a documented operating and maintenance history, complete technical documentation, and is available for inspection and immediate sale. ### Technical Specifications - Manufacturer: Kalmar - Model: DRG420-60S5 - Year of manufacture: 2017 - Serial number: B11400511 - Operating hours: 24,750 h - Maximum lifting capacity: 42,000 kg - Maximum lifting height: 15,100 mm - Engine: Volvo TAD1171VE - Engine power: 265 kW - Maximum torque: 1,785 Nm - Transmission: ZF WG261 5/3 automatic - Gears: 5 forward / 3 reverse - Tires: 18.00-25 pneumatic - Wheelbase: 6,000 mm - Operating weight: Approx. 66,840 kg - Spreader side shift: ±800 mm - Maximum travel speed: 26 km/h (unloaded) ### Maintenance and Repairs – 2026 Bwodpo Ah Hc Nofx Aiwjw Significant maintenance work has recently been completed: - New batteries installed - Transmission overhauled by IOW Service - New transmission control unit and wiring harness - New boom extension cylinder supplied by Cargotec ### Current Machine Condition - Fully operational, with all systems functioning correctly - No visible hydraulic leaks - No cracks or structural damage reported - Tire condition: approximately 45% remaining - Spreader twistlocks: approximately 4,000 operating hours - Polish TDT technical inspection valid until July 2027 - Complete technical documentation available ### Availability and Inspection The reach stacker is available for immediate sale and can be inspected at our intermodal terminal in Szamotuły, Poland. Additional photographs, inspection videos, and technical documentation are available upon request. Asking price: €169,000 excl. VAT – open to reasonable offers. ### Contact Ost Sped Intermodal Szamotuły, Poland

Condition: used, mileage: 357,245 km, power: 210 kW (285.52 HP), first registration: 12/2012, fuel type: diesel, empty load weight: 10,615 kg, maximum load weight: 7,355 kg, overall weight: 18,000 kg, axle configuration: 4x4, wheelbase: 3,850 mm, brakes: engine braking, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 2, loading space length: 4,000 mm, loading space width: 2,400 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, all wheel drive, cabin, crane, fog lights, immobilizer system, onboard computer, power assisted steering, seat heater, soot filter, trailer coupling, * German vehicle * 1st hand * original ONLY 357,245 km * Condition, see photos * Complete documentation & inspection book available * 4x4 all-wheel drive * Atlas crane foldable behind the driver's cab * Type: TLC 65.2-A 1L * Radio remote control * Floor control * Lifts at: 1.9m = 3,100kg - 3.7m = 1,700kg - 5.4m = 1,120kg - 7.2m = 780kg * Hook height 9 m * 5th & 6th control circuit * 2 hydraulic supports * Meiller 3-way tipper * L=4,000 x W=2,400 x H=600 mm * DIN lashing eyes * Trailer coupling * Trailer load: 24,000 kg * Trailer hydraulics * Municipal plate * Municipal hydraulics * Schmidt municipal control * Winter service lighting * 8-speed manual transmission * Air conditioning * Rear wall of driver's cab with window * Electric windows * Electric mirrors, heated * Heated windscreen * Comfort driver's seat, air-suspended * Seat heating * Radio CD Bwedpfxjv Azw Dj Aiwew * Rotating beacons * Differential lock * ABS (anti-lock braking system) * Leaf spring suspension * Roof hatch * Fog lights * Raised exhaust system * Sun visor * Work lights * Wheelbase: 3,850 mm * GVW: 18,000 kg * Empty weight 10,615 kg * Payload: 7,385 kg * Snow blade and salt spreader available for an additional charge * Grabber available for an additional charge If you require a new TÜV inspection, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without a new DGUV, without a new SP, without a new UVV.  You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note:  We offer and strongly recommend an inspection and testing of the goods so that the buyer does not have any false impressions about their quality and suitability. Inspections and tests are possible at any time by appointment and are expressly desired.   All information is provided without guarantee. We are not liable for errors or incorrect information in the offer. The buyer is obliged to check the condition and equipment of the goods/vehicles for themselves. Subject to changes, prior sale and errors. - .

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Specification: Feed Speed 814m/min Workpiece Thickness: 8-60mm Edge Material Coil: 0.4-3mm Edge Material Strip: 0.4-8mm Joint Trimming 2x2.2kw Workpiece Pre heating EVA Gluepot Airtec Unit AT15 Edge Magazine Pneumatically Driven pressure Roller End Trim Unit Chamfer/Straight Top & Bottom Trimming Unit with Pneumatic Adjustment Contour Trimming Unit Profile Scraping Unit with Quick Change Heads Glue Joint Scrapers Buffers Bwsdpfxo Afxulj Aiwjw CE

Condition: ready for operation (used), Compact Dovetail Machine Output: approx. 4–6 joints/min. For wood tenon and mortise joints Thickness: 30–120 mm Width: 75–250 mm Pressing force: 22.5 t Automatic glue application via 2 glue combs, used for processing PUR glue. Bjdpfxezmmr Ro Aiweww Spring-mounted with a safety shut-off system that immediately stops the milling and glue application feed in the event of even the slightest load. All parts are chrome-plated. Electrical system with Siemens S7 PLC, year 2015 Milling motor output: 22.00 kW Hydraulic unit: 29.50 kW Oil cooler: 0.75 kW Infeed feed: 1.50 kW Outfeed feed: 2.50 kW Cut-off saw: 3.00 kW Total power consumption: 59.25 kW = 120 amps In the past, jöma has successfully delivered and installed 10 of these machines. We can supply all spare parts for the compact dovetail machine. We, jöma, have been supplying and repairing Cook Bolinder machines for 30 years.

Condition: used, Edge sanding machines OTT S30 – 20 m/min Manufacturer: OTT Type: S30 Condition: Used Location: Rattelsdorf warehouse Machine description For sale is a used OTT S30 edge banding machine for professional edge processing in the wood and furniture industry. The machine features various processing units for efficient edge processing and is suitable for use in furniture production as well as in wood processing companies. Bwedpsz S Nukjfx Aiwjw Equipment and functions * Edge banding * Trimming * Flush trimming * Radius milling (R = 2 mm) * Scraping blade * Quick heating tank * Glue tank for granules * Feed rate: approx. 20 m/min Technical data * Machine length: approx. 4,500 mm * Year of manufacture: unknown * Machine condition: used

Condition: good (used), Eurotecnica 384 Perfect Binder 100% functional, ready to use. Manufactured by Eurotecnica, Italy. Capable of binding books, brochures, pads, prescriptions, etc. A very handy machine, ideal for digital printing. Technical specifications: Maximum format: 325 x 380 mm Spine thickness: 40 mm Cover weight: 300 gsm Production rate: approx. 200 books/h Weight: 150 kg 230V power supply Material detection sensors, adjustable gluer temperature, automatic cover clamp. Bwsdpfx Aie Af E A Nowow Spine milling Easy to use Smooth adjustment of glue thickness

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 20,300 h, load capacity: 8,000 kg, lifting height: 12,500 mm, fuel type: diesel, mast type: duplex, construction height: 8,120 mm, power: 145 kW (197.14 HP), empty load weight: 30,900 kg, total length: 5,565 mm, drive type: Diesel, construction width: 3,380 mm, Empty container stacker Load center: 2540 Mast type: Duplex Transmission: ZF WG190 automatic Condition: Ready for operation and fully functional Technical condition: good Front tire type: Pneumatic Front tire size: 12.00-20 Front tire condition: 20 - 40% Rear tire type: Pneumatic Rear tire size: 12.00-20 Bwodpoz Rrayefx Aiwow Rear tire condition: 80 - 100% 20-40ft side spreader, double stacking

Condition: used, functionality: fully functional, Year of construction: 2006, operating hours: 13,000 h, load capacity: 9,000 kg, lifting height: 16,000 mm, fuel type: diesel, mast type: triplex, construction height: 6,350 mm, power: 174 kW (236.57 HP), drive type: Diesel, Empty container forklift Load center: 1220 Mast type: Triplex Transmission: Clark/Dana 13.7HR 32335-630 Condition: Ready for use and fully functional Technical condition: normal Front tire type: Pneumatic Bjdpfxsz Rra Tj Aiweww Front tire size: 14.00-24 Rear tire type: Pneumatic Rear tire size: 14.00-24 20ft-40ft sidelift spreader with twistlocks

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 23,000 h, load capacity: 9,000 kg, lifting height: 15,500 mm, fuel type: diesel, mast type: duplex, construction height: 4,215 mm, power: 179 kW (243.37 HP), empty load weight: 44,200 kg, total length: 6,700 mm, drive type: Diesel, construction width: 4,150 mm, Empty container stacker Load center: 1220 Mast type: Duplex Transmission: ZF WG210 automatic, 4/3 gears Condition: Ready for use and fully functional Technical condition: normal Front tire type: Pneumatic Bjds Afq Evjpfx Aiwsww Front tire size: 14.00-24 Front tire condition: 20 - 40% Rear tire type: Pneumatic Rear tire size: 14.00-24 Rear tire condition: 40 - 60% Elme 594ND 20-40ft sidelift spreader, double stacking 6+1 HC high stacking

Condition: good (used), Year of construction: 2016, machine/vehicle number: 0000087, functionality: fully functional, operating hours: 2,202 h, power: 8,000 kW (10,876.96 HP), input voltage: 400 V, input current: 18 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 6 mm, feed rate X-axis: 11 m/min, actuation type: electric, total height: 1,550 mm, total length: 4,100 mm, total width: 780 mm, overall weight: 990 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Preliminary milling unit Edge banding glue station Capability to glue up to 60mm Feed rate 11m per min Control panel with temperature setting Trimming of edge banding from a roll Guillotine for trimming edge banding from a roll Top/bottom milling unit with profiled milling cutters Polishing unit Year of manufacture 2016 Excellent condition Bwedpfezzcc Isx Aiwjw

Condition: new, Year of construction: 2024, Drying and Burn-in Furnace TRO, Model I For drying racks with max. 50rods, useable size 60x90cm, outer dimensions: approx. 2290mm wide x 1390mm deep x 2230mm high, useable space: approx. 1400x1070x1660cm. Suitable for vaporisation of low amounts of solvent, authorised for inks and solvents up to hazard class A II, according to safety requirements DIN EN 1539. Equipped with control of the minimum exhaust volume and a heating system in regard to the exceedance of the max. temperature. Fixing and drying temperature: up to max. 180°C. Power connection: 400V/50Hz, 21kW, weight: approx. 650kg, varnishing: corps RAL 7035 (light grey), doors RAL 7037 (dust grey). Special varnishing upon request. Chamber dryer, all-steel construction, with good thermal insulation. Simple insertion of drying racks by means of easy-to-open wing doors. The air is sucked out of the drying chamber by ventilators, is blown through thermostat-controlled heating registers and re-fed temperature-controlled to the drying chamber. The solvents released during the drying process are dissipated from the exhaust side of the ventilator while supply air gets into the drying chamber. The horizontal air guide in the drying chamber guarantees an even temperature control. The required temperature can easile adjusted via actual and nominal value thermostat. Overheating protection by safety thermostat. Particularly suitable for fixing and drying of textile inks, flock glues as well as for burning-in of plate and aluminium signs up to 180°C. - Various drying racks for different applications available. - We recommend the installation of a gas warning unit. Delivery time 10-12 weeks. ATTENTION: Not permitted for solvents! Not permitted for foods! Boded I T Exspfx Aiwjww

Condition: used, mileage: 4,800 km, power: 80 kW (108.77 HP), first registration: 11/2017, overall weight: 5,000 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, Equipment: ABS, air conditioning, all wheel drive, soot filter, Multicar M29 C.H.K 4x4 with winter package Vehicle can be re-registered to a maximum weight of 3.5 tons. 3.0 L, 80 kW / 109 hp turbo diesel engine, Euro 6, green 4,800 km, 645 operating hours * All-wheel drive with low-range gear * Automatic transmission * Air conditioning * Three-way tilting body with lashing eyes * Rear axle lock * Light bar with repeater lights and work lights Bwedpfx Aie Aaudfowow * Foldable rotating beacon on the left and right * Hydraulic system * Swivel function, 2 front * Leakage line, front * Rear hydraulics * Control panel holder * Spiral fan * Gas inch function * Plug connection for front and mounted equipment * Snowplow function * Distance-dependent spreading * Radio with Bluetooth and hands-free system * LED work lights at the rear * Tires 285/65 R16C M&S * Inspection and service recently performed * Machine is in perfect, immediately operational condition. * TÜV/emission test newly passed * Includes winter package: Epoke spreader with stainless steel base, control panel and 4 parking devices * Fiedler snowplow * Leasing / hire purchase / trade-in possible. Various attachments in stock. Errors and prior sale excepted.

Condition: used, mileage: 57,594 km, power: 110 kW (149.56 HP), first registration: 11/2018, fuel type: diesel, empty load weight: 3,070 kg, maximum load weight: 3,430 kg, overall weight: 6,500 kg, axle configuration: 4x4, wheelbase: 2,400 mm, brakes: other, color: orange, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 2, loading space length: 2,000 mm, loading space width: 1,600 mm, loading space height: 400 mm, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, differential lock, onboard computer, soot filter, trailer coupling, * German vehicle * First owner * Documentation available * Only 2,054 operating hours * Original 57,594 km * 4x4 all-wheel drive * EURO 6 * 90 km/h approval * Condition: see photos * Three-sided tipper body * Loading area: Length 2,000 mm x Width 1,600 mm x Height 400 mm * Aluminum loading flaps * Steel floor with lashing eyes * Trailer coupling with electrical and hydraulic connections * Trailer load 3,500 kg * Municipal plate/work platform, hydraulically adjustable, with electrical and hydraulic connections * Joystick control * Winter service lighting * Snowplow, salt spreader, broom, and various attachments available at extra cost * Cab with 2 comfort seats, air-suspended * Air conditioning * Differential lock * Rotating beacon * Radio CD * Work lights * Wheelbase (mm) 2400 * Gross vehicle weight (GVW) 5,000 kg Bjdj Agpfdepfx Aiwoww * Unladen weight 2,370 kg * Payload 2,630 kg * If sold to commercial businesses and for export (non-EU and EU), the German commercial law applies. If a new TÜV (technical inspection) is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does NOT include a new TÜV inspection, a new DGUV (German Social Accident Insurance) certificate, a new SP (safety report), or a new UVV (accident prevention regulations) certificate. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish Note: We strongly recommend and offer a viewing and inspection of the goods so that the buyer does not have any false impressions about the condition and suitability. Viewings and inspections are possible and expressly desired at any time by appointment. All information is without guarantee. We are not liable for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.

Condition: used, mileage: 57,594 km, power: 110 kW (149.56 HP), first registration: 11/2018, fuel type: diesel, empty load weight: 3,070 kg, maximum load weight: 3,430 kg, overall weight: 6,500 kg, axle configuration: 4x4, wheelbase: 2,400 mm, brakes: other, color: orange, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 2, loading space length: 2,000 mm, loading space width: 1,600 mm, loading space height: 400 mm, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, differential lock, onboard computer, soot filter, trailer coupling, * German vehicle * 1st owner * Documentation available * Only 2,054 operating hours * Original 57,594 km * 4x4 all-wheel drive * 90 km/h approved * EURO 6 * Condition: see pictures * Three-way tipper body * Load area: Length 2,000 mm x Width 1,600 mm x Height 400 mm * Steel floor with lashing points * Aluminum tailgate * Municipal plate/work platform, hydraulically adjustable with electrical and hydraulic connections * Tow hitch with electrical and hydraulic connections * Towing capacity 3,500 kg * Winter service lighting * Snowplow, salt spreader, broom, and various attachments available at an extra cost * Cab with 2 comfortable, air-suspended seats * Air conditioning * Joystick control * Differential lock * Radio CD * Work lights Bwodpfj Agpfhex Aiwow * Rotating beacon * Wheelbase (mm) 2400 * Gross vehicle weight (GVW) 5,000 kg * Unladen weight 2,370 kg * Payload 2,630 kg * If sold to businesses and for export (non-EU and EU), the German commercial law applies. If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does not include a new TÜV inspection, a new DGUV, a new SP, or a new UVV. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish. Note: We strongly recommend and offer the opportunity to inspect and examine the goods, so that the buyer does not have any false impressions about the condition and suitability. Inspection and examination are possible and expressly desired at any time by appointment. All information is provided without guarantee. We are not liable for any errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to change, prior sale and errors.

Condition: used, mileage: 6,700 km, power: 55 kW (74.78 HP), first registration: 02/2018, overall weight: 3,500 kg, fuel type: diesel, color: orange, gearing type: mechanical, emission class: euro5, loading space width: 1,500 mm, loading space length: 2,000 mm, loading space height: 400 mm, number of seats: 2, Equipment: ABS, all wheel drive, soot filter, Multicar M27 Compact * 3500 kg * 2 L Turbo Diesel, 55 kW / 102 hp * 6700 km / 609 operating hours * Switchable all-wheel drive * Wheelbase: 2450 mm (short) * 5-speed manual transmission with reduction gear * 4-channel ABS, 4-wheel disc brakes (internally ventilated) * 3-circuit hydraulics * Swiveling front section * Rear hydraulics * Quick-change system for attachments SWV 500 * Lighting bar * Driver's suspension seat * Electrically adjustable and heated exterior mirrors * Electric windows * Ball-type trailer hitch * Tires 225/75 R16c M&S, new * Inspection service, new * New TÜV and emissions test * Workshop checked * 12-month used vehicle warranty through a warranty provider. Optional winter package: Various spreaders and snowplows, new and used, in stock. Bwedpfx Aie Agqfvewsw Leasing / financing / vehicle rental / trade-in / delivery to your location possible. You can find more vehicles of the Fuso Canter and Multicar brands, as well as various attachments, at: - Errors and prior sale excepted. - Our general terms and conditions apply.

Condition: used, mileage: 19,986 km, power: 96 kW (130.52 HP), first registration: 02/2023, overall weight: 3,500 kg, fuel type: diesel, color: white, gearing type: mechanical, emission class: euro6, loading space length: 2,385 mm, Year of construction: 2023, total length: 5,767 mm, total width: 2,198 mm, total height: 2,357 mm, number of seats: 7, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), soot filter, Errors and omissions excepted! Internal number: 1181. NR58403 ----EQUIPMENT * Conversion to a rear tipper * Conversion for winter service with snowplow and spreader * Airbag (passenger side) * Trailer hitch - fixed, 13-pin socket - incl. trailer stabilization (TSC) * Exterior mirrors, long arm - with integrated turn signals * Heated windshield * Seats: Seat Package 29 - driver's seat, 4-way electrically adjustable (fore/aft, backrest, seat cushion tilt, height) - double passenger seat with storage compartment under individually folding seat cushions - headrests, height-adjustable - tray integrated in the double passenger seat (foldable) - seat heating front - interior armrest for driver - lumbar support, manual (driver's seat) - airbag passenger side, head/shoulder airbags front and side airbags front - seat upholstery: fabric * Central locking - second key, foldable with remote control incl. central locking * Transmission: 6-speed gearbox * Anti-lock braking system with electronic brake-force distribution (EBD) * Axle load increase - front to 1850 kg * Airbag driver side * Exterior mirrors, electrically adjustable and heated - with integrated turn signals * Exterior mirrors, short arm - with integrated turn signals * Battery: Battery runtime, programming of battery runtime to 10 minutes * On-board computer with fuel consumption and mileage information (e.g. remaining range) as well as outside temperature display and Ford ECOMode * Roof, flat * Roof, overhead storage compartment front * Headliner in driver's cab * Roof marker lights * Double cab - storage compartment under the seats of the 2nd row - 2 rear doors with fixed windows - headliner complete * Tachometer * Electronic stability and safety program (ESP) with traction control (TSC) - hill start assist - side wind assist - safety brake assist - rollover protection - emergency brake assist incl. emergency brake light - additionally with trailer stabilization only in conjunction with trailer hitch * Windows, 2nd row: Side windows fixed, right and left * Power windows front, electrically operated - with quick-down/up function for driver's side * Ford Easy Fuel - comfort fuel filler cap and misfueling protection * Generator * Headlights - low beam: Halogen headlights with daytime running lights * Glove compartment with lockable lid * Interior lighting with delay circuit with reading lights front * Air conditioning front incl. dust and pollen filter * Fuel tank 70 liters Bjdpfx Aj Afa Nkjiweww * Radiator grille: 3 struts and trim in black-grey plastic * Paint: Solid color * Steering wheel: Artificial leather steering wheel * MyKey key system - individually programmable second key * Fog lights * Emergency assistance call * Technology Package 8 (4x4) - windshield, heated - windshield wipers with rain sensor - active emergency brake assist (camera-based) - headlight assistant with day/night sensor - cruise control - Ford audio system (DAB+, MyFord Dock, FordPass Connect, speakers, antenna, controls on the steering wheel, Bluetooth, USB, hands-free system) * Particulate filter: Diesel particulate filter * Flatbed: Standard flatbed (wide) - front wall extension, retaining straps for tailgate * Power steering * Seat belts - seat belt tensioners and force limiters front * Seats: Rear seat package 1 - 2nd row with 4-seater bench seat incl. 4 headrests, - 3-point seat belts, - two ISOFIX mounts on the two outer seats and storage compartment * Recirculation mode * Immobilizer * Heat protection glazing, lightly tinted

Condition: used, mileage: 21,950 km, power: 110 kW (149.56 HP), first registration: 10/2023, fuel type: diesel, overall weight: 5,200 kg, color: orange, gearing type: mechanical, emission class: euro5, Equipment: ABS, all wheel drive, soot filter, Your MULTICAR – authorized dealer with expertise, service, and consultation – offers you: MULTICAR M31 C 4x4 including snowplow + spreading attachment First registration: 10/2023 Mileage: 21,950 km Operating hours: 1,342 engine hours Net price: €99,900.00 Condition: Inspected, oils, filters, and wear parts replaced, workshop-tested, visually and technically fully refurbished, newly preserved. Includes 12 months of repair cost insurance for the base vehicle! Equipment: - 3.0-liter Iveco turbo diesel engine, low emissions according to Euro VI, 110 kW / 150 hp - Short wheelbase (2,450 mm), 4x4 drive including crawler gear, 10 forward and 2 reverse gears - Tilting comfort cab, power steering - Fully synchronized 5-speed gearbox (90 km/h) Additional equipment: - Mobile hydraulics 03-3 with 2 working circuits - Leak oil line at the front - Quick-change attachment carrier SWV 500 - 4-pole socket at the front - Equipment mounting kit - Tires 225 / 75 R16 C M+S - Warning marking red/white, 1 set = 4 pieces - Rotating beacon, extendable - Light bar on the cab roof with additional dimmable headlights - Work lights at the rear of the cab roof - Electrically heated and adjustable exterior mirrors - Electric windows - Driver's suspension seat - Ball head – trailer coupling (3.5 t trailer load), 13-pole socket at the rear - Suspension seat for the driver - Interior mirror - CD radio with MP3 function, FM, RDS, mute, Bluetooth - Three-sided tipper 2,100 x 1,500 x 400 mm + angled front wall extension Winter service – attachments: Spring flaps – snowplow FIEDLER FRS 2000 (used, very good condition) Total width 2.00 m, clearing width in diagonal position approx. 1.70 m, blade height 0.60 m, hydraulically pivoting, quick-change attachment, individual spring flap segments, rubber scraper strip, warning marking, warning flags Spreading attachment FIEDLER FSS 1100 (used, good condition) Filling volume 1,200 liters Equipped with mixing shaft, conveying screw and rotary spreader, spreader and chute made of stainless steel, including folding roof, protective grid and spreader lighting, adjustable spreading rate and spreading width adjustment via control panel in the cab, spreading width adjustable from 1-6 m, spreading stop when the vehicle stops, 4 support legs Bwodpo Agdfhofx Aiwew Other versions of winter service equipment available on request. Errors, changes, and prior sale are subject to change. Our general terms and conditions apply. Benefit from our many years of experience in sales and service, and let us create your individual offer. Take advantage of our leasing and financing options. We guarantee competent advice and support from our qualified staff. You can find other offers from the commercial vehicle manufacturers MULTICAR and ISUZU, as well as a comprehensive range of attachments, at Tel.:

Condition: used, Biesse Akron 1300 Edgebanding Machine Pre-milling cutters Bedpfx Aie Af U E Towjww Replaceable glue pot Roller glue application Pneumatic pre-trimming guillotine Pressure rollers Final trimming saw R1-R2 top-bottom milling unit Multi-profile trimming cycle Flat trimming cycle Polishing unit Max. component height: 60mm Max. edgeband thickness (roll): 3mm Feed rate: 12m/min Machine length: 410cm Connected power: 8.6KW Machine inspected, ready for operation.

Condition: good (used), Year of construction: 2019, operating hours: 2,749 h, load capacity: 2,000 kg, lifting height: 6,130 mm, fuel type: electric, mast type: triplex, construction height: 2,610 mm, empty load weight: 4,000 kg, mileage: 2,749 km, - Electric three-wheel forklift Bsdpfez Rzzmsx Aiwoww - Brand: Still - Year of manufacture: 2019 - 2,749 operating hours - Capacity: 2,000 kg - Lifting height: 6,130 mm - Mast height (lowered): 2,610 mm - Side shift and fork spreader - Free lift - Fork length: 1,200 mm - Battery: 2019 - Includes charger - Automatic filling system - Watch the video on YouTube

Condition: ready for operation (used), functionality: fully functional, mileage: 53,179 km, power: 55 kW (74.78 HP), first registration: 03/2019, overall weight: 3,500 kg, fuel type: diesel, color: orange, axle configuration: 4x4, maximum load weight: 1,699 kg, empty load weight: 1,900 kg, next inspection (TÜV): 10/2028, fuel: diesel, driver cabin: other, gearing type: hydrostat, emission class: euro5, loading space volume: 1.3 m³, operating hours: 7,381 h, number of seats: 1, number of previous owners: 1, machine/vehicle number: ES1785-2, Equipment: additional headlights, air conditioning, all wheel drive, hydraulics, low noise, soot filter, Hako Citymaster 1600, first owner, in top condition formerly a municipal/authority vehicle registered as a self-propelled working machine (40 km/h) upon request, we will perform a major engine inspection including timing belt, water pump, oil, and filters free of charge at the time of sale. 4297 sweeping operating hours Bedpozk Ukiefx Aiwsww 7381 total operating hours 53179 kilometers 4x4 all-wheel drive - hydrostatic all-wheel drive including Kif snowplow, type CM 1600, 1500 mm wide (like new/never seen snow) or alternatively with Kif front sweeper, type CM 1600, 1.300 mm wide, built in 2019 (like new/never seen snow), not shown in the pictures including Gmeiner salt spreader, type Husky 500V FS with support legs (like new/used twice for testing) like-new mixed bristle brush new water spray nozzles external controls for the sweeping material container rearview camera and suction shaft camera sweeping width up to 2270 mm sweeping material container made of stainless steel wheelbase 1600 mm track width 1055 mm fresh water tank 180 liters unladen weight approx. 1900 kg permissible total weight 3500 kg length: 4510 mm / width: 1210 mm / height: 1970 mm driving speed 0-40 km/h working speed 0-24 km/h noise reduction package engine: water-cooled 4-cylinder VW industrial diesel engine fuel tank approx. 60 liters hydrostatic all-wheel drive 2-circuit high-pressure hydraulics, circuit 1 (front) 0–50/0–70 l/min - 225 bar, circuit 2 (rear) 0–20/25/30 l/min - 195 bar hydraulic service brake via foot pedal cabin with air-sprung comfort driver's seat air conditioning / heating water treatment system hydrant connection dosing system other applications possible through additional attachments from HAKO, such as sweepers, snowplows, and lawnmowers (not included in the scope of delivery) errors, changes, and prior sale reserved We sell exclusively according to our general terms and conditions and exclude any warranty. Errors, changes, and prior sale reserved. We are available Monday to Friday from 9:00 a.m. to 5:00 p.m. We are also available on Saturdays by appointment. Telephone appointments can be arranged outside of these opening hours. We will gladly accept your current used equipment/vehicle in part exchange. Sales to commercial enterprises and exporters are given priority; this applies to our entire vehicle stock. The above information is not binding. Errors/changes and prior sale are subject to change!