Used Golf Course Maintenance for sale (6,898)

Condition: used, mileage: 34,050 km, power: 85 kW (115.57 HP), first registration: 12/1992, overall weight: 6,600 kg, fuel type: diesel, color: green, gearing type: mechanical, total length: 7,180 mm, total height: 3,200 mm, number of seats: 7, Equipment: air conditioning, parking heater, Internal vehicle number: 1453B ---- Why autonext GmbH? ---- One of Germany’s largest commercial vehicle exhibitions. Always over 400 vehicles immediately available. Largest selection – Best price Over 1,000 satisfied customers per year – Top customer reviews. WhatsApp Chat: ### Offer: Financing from 4.99% ### ---- This is a former government vehicle, meaning it has received regular maintenance. 1 previous owner German vehicle The vehicle is in very good and well-maintained condition Nearly new all-weather tires Nearly new brakes, front and rear Number of seats: 7 3 generators (Dometic) installed Dometic air conditioning Webasto auxiliary heater Minitron battery charger Reversing camera Fuse box 230 V power outlets Awning Aluminium checker plate cladding across the entire roof Roof satellite system Seats with table Rear bench seat Blinds for all windows Sliding roof Lighting Comfort suspension seat And much more! ---- Warranty & Quality Seal: * Warranty Assistance systems: * Rear parking aid * Reversing camera Comfort & Climate: * Auxiliary heater * Side blinds * Air conditioning * Swivel seat(s) * Rear blind * Comfort suspension seat Exterior & Design: * Tow bar Interior & Design: * Sliding sunroof Transmission: * Manual transmission Further information: * Lighting * Municipal vehicle * Awning * Non-smoking vehicle Dodpjy Dy Ivsfx Apwsut * Service book ---- Warranty & "TÜV Profi Check" are of course available! We are happy to take your vehicle in part exchange! We can also provide you with a tailored financing or leasing offer! No down payment, redeemable at any time, with special repayments possible. Share your requirements with our sales team – we will be happy to advise you. ---- Arrange a test drive appointment and let us convince you of the quality of our vehicles. Appointments: Mon.–Fri. 08:30 am–6:00 pm, Sat. 09:30 am–1:30 pm ---- Visit us also at [website]. We look forward to your visit! ---- Subject to errors and changes. Equipment listed online is not contractually binding; features must be verified on site.

Condition: used, mileage: 106,050 km, power: 120 kW (163.15 HP), first registration: 11/2020, fuel type: diesel, overall weight: 3,500 kg, color: yellow, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 5,267 mm, total width: 2,020 mm, total height: 2,365 mm, loading space length: 2,700 mm, loading space width: 1,770 mm, loading space height: 1,650 mm, Equipment: ABS, central locking, electronic stability program (ESP), navigation system, soot filter, Internal vehicle number: 6556BX ----Why autonext GmbH? One of the largest commercial vehicle exhibitions nationwide Over 400 vehicles available immediately at all times Largest selection - Best prices Over 1000 satisfied customers per year - Top customer ratings WhatsApp Chat: ### Offer: Financing from 4.99 % ### ----Good and well-maintained condition 1st owner, German vehicle, non-smoker vehicle Full service history exclusively at Mercedes Benz New brakes front and rear Automatic transmission Navigation system Cruise control Blind spot assist Sliding doors on both sides Wood paneling in cargo area On request, we offer a tow bar retrofit for only 599,- Euro, and if possible, also an increase of towing capacity up to 3.5t ----Special equipment: * MBUX multimedia system (10.25" touchscreen with navigation) * Voice control system (Linguatronic) * Bluetooth hands-free system * WLAN hotspot * Multifunction steering wheel * 13-pin trailer socket * Electrically foldable exterior mirrors * Exterior mirrors with blind spot assist * DAB tuner (digital radio reception) * Entry handle at rear right C-pillar * Suspension: Stabilization level I * Cruise control system * Front cup holder * Wooden floor in cargo area * Flip cover for storage compartment * Instrument cluster with color display * Cable duct on side wall * Spare wheel with full road tires * Spare wheel holder under rear frame including jack * Sliding door load/passenger compartment left * Seats in cab: Comfort driver's seat Duedpfx Apjy Acu Aewot * Trim panels in load/passenger compartment: high wood (up to roof) * Fleece battery 92 Ah Standard equipment: 3rd brake light, storage compartment above windscreen, storage compartment below passenger side dashboard, rear towing eye, adaptive brake light, driver airbag, hill start assist, anti-lock braking system (ABS), traction control (ASR), drive type: rear-wheel drive, washer fluid level indicator, both exterior mirrors electrically adjustable and heated, outside temperature display, brake assist, cab roof lining, automatic driving light activation, entry handle for sliding door on cargo compartment partition, electronic brake-force distribution (EBD), electronic stability program (ESP), driver assistance system: crosswind assist, power windows front, automatic transmission GTronic (7-speed), rear door (opening angle 180 degrees), body/chassis: standard van, keyless start, child safety lock, communication module (LTE) for digital services, fuel tank: main tank 71 liters, full-length load compartment partition, steering wheel (mechanical height adjustment), headlight range control, Mercedes-Benz emergency call system, engine 2.1 liter - 120 kW CDI CAT, particulate filter, wheelbase 3250 mm, low emission as per Euro 6 standard, sliding door load/passenger compartment right, seatbelt system with warning device (driver’s side), seat cover / upholstery: fabric, passenger seat in cab with armrest, adjustable passenger seat in cab, driver’s seat in cab with armrest, start/stop engine system, daytime running lights, maintenance interval display Assyst, immobilizer, heat-insulating glazing, central locking with remote control, permitted gross vehicle weight 3.50 t. ----MOT/emissions test (HU/AU) renewed on request. ----Warranty & “TÜV Profi Check” are of course available! We would be happy to take your vehicle in trade-in! We can also create a personalized financing offer for you.

Condition: used, mileage: 27,050 km, power: 85 kW (115.57 HP), first registration: 12/1992, overall weight: 6,600 kg, fuel type: diesel, color: silver, gearing type: mechanical, total length: 7,180 mm, number of seats: 3, Equipment: air conditioning, parking heater, Internal vehicle no.: 2458B ----Why autonext GmbH? One of the largest commercial vehicle showrooms nationwide Always over 400 vehicles immediately available Largest selection - Best prices More than 1,000 satisfied customers per year - Top customer ratings WhatsApp Chat: ### Offer: Financing from 4.99% ### ----This is a former government vehicle, which means it has undergone regular maintenance 1st owner German vehicle Vehicle is in very good and well-maintained condition New all-season tires New front and rear brakes Honda generator with extra tank and only 593 operating hours Dometic air conditioning unit Webasto auxiliary heater Minitron battery charger Fuse box 230V sockets Awning Aluminium chequer plate paneling on the entire roof Roof satellite Seats with table Rear bench seat Blinds for all windows Pop-up roof Lighting Suspension seat and much more! Dujdpjy Acupjfx Apwot ----Warranty & Quality Seal: * Warranty Comfort & Climate: * Auxiliary heater * Air conditioning * Suspension seat Interior & Design: * Pop-up roof Transmission: * Manual gearbox Further information: * Lighting * Municipal vehicle * Awning * Non-smoker vehicle * Service log book ----MOT/ emission test new on request. ----Warranty & "TÜV Profi Check" are of course available from us! We are happy to accept your vehicle as a trade-in! We can also provide you with a personalized financing or leasing offer! No down payment, can be repaid at any time, and with special repayment options. Let our sales team know your requirements—we are happy to advise you. ----Arrange a test drive appointment and see the quality of our vehicles for yourself. Appointments: Mon.–Fri. from 08:30 - 18:00, Sat. from 09:30 - 13:30 ----Visit us at We look forward to your visit! ----Errors and modifications reserved. The equipment shown online is not contractually binding. Equipment must be checked on-site.

Condition: used, mileage: 150,000 km, power: 132 kW (179.47 HP), first registration: 05/2018, fuel type: diesel, overall weight: 7,000 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 7, total length: 8,238 mm, total width: 2,052 mm, total height: 2,340 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, tail-lift, Internal vehicle no.: 5007 Why autonext GmbH? One of the largest commercial vehicle exhibitions in Germany Always over 400 vehicles immediately available at our location Largest selection - Best prices More than 1,000 satisfied customers per year - Top customer reviews WhatsApp Chat: ### Offer: Financing from 4.99% ### -- Good and well-maintained condition 1 owner, German vehicle, non-smoker vehicle Full service history exclusively at Iveco New front brakes As-new all-weather tires (front) Permissible total weight: 7,000 kg Body: flatbed with tarpaulin Number of seats: 7 Workshop interior by "Sortimo" with vice and shelving systems Hydraulic tail lift Cruise control Air conditioning Auxiliary heater Cargo area lighting switch Duedoyzvwnopfx Apwot Fire extinguisher Tachograph Twin rear tires Tow bar preparation On request we can retrofit a reversing camera. Special equipment: * Air conditioning * 170 cc cold compressor * Storage compartment on dashboard with USB port * Audio system: radio with CD player (MP3-compatible), USB and Bluetooth hands-free kit * Roof storage compartment with additional DIN slot * Rear differential lock * Cruise control * Smoker package * Acoustic reversing warning (external warning system) * Cargo area lighting switch * Rear cross member at frame end * Cabin seats: driver's comfort seat (hydraulic) * Auxiliary heater (hot water) with timer Standard equipment: Driver airbag, trailer socket preparation, anti-lock braking system (ABS), traction control (ASR), drive type: rear-wheel drive, model: C-series, electrically adjustable and heated exterior mirrors, long side mirrors for vehicle width 2350 mm, brake assist, electronic brakeforce distribution, electronic stability program (ESP), driver assistance system: lane departure warning, digital tachograph, rear suspension: trapezoidal spring, electric windows, tinted windscreen and side windows, 150 A alternator, speed limiter at 90 km/h, 6-speed gearbox, A-pillar grab handle, body: double cab flatbed standard, instrument cluster with pixel-matrix display, fuel tank: 90 liters, headlight range control, engine 3.0 l - 132 kW diesel, radio pre-installation with speakers, wheelbase 4,750 mm, spare wheel matching road tires, spare wheel holder between floor longitudinal beams, particulate filter, low emission according to Euro 6, power steering, cabin seats: front passenger double seat with headrests, daytime running lights, maintenance indicator, immobilizer, central locking with remote, permissible total weight: 7.00 t. --- Main and emissions inspection (HU/AU) available on request as new. --- Warranty & "TÜV Profi Check" are of course available from us! We are happy to take your vehicle in trade! We can also prepare a personalized finance or leasing offer for you! No down payment required, can be paid off at any time, special repayment options available. Contact our sales team with your requirements—we are happy to advise you. --- Book a test drive appointment and let the quality of our vehicles convince you! Appointments: Mon–Fri 08:30–18:00, Sat 09:30–13:30 --- Also visit us at [website]. We look forward to your visit! --- Errors and changes excepted. The equipment listed online is not contractually binding. Equipment must be checked on site.

Condition: used, In this offer you purchase a used inkjet printing system "Canon VarioPrint i300" Object of sale: 1 x Canon VarioPrint i300 with the following equipment: The exact equipment can be found in the attached PDF document. Meter readings: Total: Approx. 166,100,000 Condition: The machine has been continuously serviced by Canon. Maintenance certificates available. A certified disassembly was carried out by Canon. The machine was restored to its delivery condition. A final test ran flawlessly. The machine was then dismantled by Canon specialists and packed in wooden crates, which were also originally used for delivery by Canon. The sales price does not include (seaworthy) packaging, which is available for a deposit. The machine is our property and is NOT a brokerage transaction. This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function. Test printouts are shown. Dodpfxetw Sk Ue Apwjut Packaging and dispatch: An inspection of the machine in Belgium is possible by arrangement. The machine is already packed in the original delivery boxes. Worldwide shipping possible on request! A deposit of €15,000 is charged for the packaging. This fee will be refunded upon return. For further information you can of course contact us personally.

Condition: used, mileage: 109,050 km, power: 120 kW (163.15 HP), first registration: 01/2020, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, total length: 6,946 mm, total width: 2,135 mm, total height: 2,451 mm, loading space length: 4,100 mm, loading space width: 1,850 mm, loading space height: 1,650 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal vehicle no.: 2243B ----Why autonext GmbH? One of the largest commercial vehicle exhibitions nationwide. Always over 400 vehicles immediately available at the largest selection - best price. More than 1,000 satisfied customers per year - top customer reviews WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Excellent Condition! 1 owner, German vehicle, non-smoker vehicle Full service history maintained exclusively at Mercedes Benz New brakes front and rear Body: Deep-freeze box ThermoKing V300-MAX (-20° Celsius) Navigation system Automatic climate control (Tempmatik) Left & right side doors Loading area length: 4.10m Loading area height: 1.65m Loading area width: 1.85m Optionally, we offer a manufacturer cold storage service for only €899. Duodpfxev E Ixyo Apwst ---- Special Equipment: * Multimedia system MBUX (7" touchscreen) * Bluetooth hands-free system * Multifunction steering wheel * 1 DIN slot in front under headliner * Acoustic package * Single-pole battery isolator switch * DAB tuner (digital radio) * Speed limiter system 90 km/h * Front cupholders * Folding lids for storage compartments * Folding lids for left/right storage compartments * Terminal strip for electrical connections (driver seat box) * Automatic climate control (Tempmatik) * Fuel filter with water separator * Front engine PTO with bracket for additional cooling compressor * Navigation system for MBUX multimedia system * Smoker package * Full-size spare wheel * Spare wheel carrier under rear frame incl. jack * Windscreen wipers with rain sensor * Cab seats: Comfort driver's seat * Rear wall trim Standard Equipment: Overhead storage above windshield, storage compartment under dashboard passenger side, adaptive brake light, driver airbag, anti-lock braking system (ABS), traction control (ASR), drive type: rear-wheel drive, washer fluid level indicator, both exterior mirrors electrically adjustable and heated, outside temperature display, roof lining in cab, automatic headlight activation, electronic brake-force distribution (EBV), electronic stability program (ESP), driver assistance systems: active brake assist, crosswind assist, lane keeping assist, digital tachograph, suspension: stabilization level II, electric windows (2), 200A alternator, 6-speed transmission - TSG (Eco Gear), Body/superstructure: standard platform, keyless start, communication module (LTE) for digital services, fuel tank: main tank 71 ltr, steering wheel (mechanically adjustable column), headlight levelling, HGV registration, side marker lights, Mercedes-Benz emergency call system, engine 2.1 ltr - 120 kW CDI CAT, particulate filter, wheelbase 4325 mm, low-emission according to Euro 6 standard, seatbelt system with warning device (driver side), seat trim/upholstery: fabric, cab seats: passenger seat with armrest, cab seats: adjustable passenger seat, cab seats: driver's seat with armrest, engine start/stop system, daytime running lights, rear underrun protection, fleece battery 92 Ah, maintenance interval indicator Assyst, immobiliser, heat-insulating glazing (windscreen with top band filter), central locking with remote control, permissible gross vehicle weight 5,000 kg. ----MOT/Emissions test (HU/AU) new upon request. ----Warranty & "TÜV Profi Check" of course available! We are happy to take your vehicle in part exchange! We prepare

Condition: used, mileage: 135,050 km, power: 120 kW (163.15 HP), first registration: 01/2021, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 6,146 mm, total width: 2,035 mm, total height: 2,452 mm, loading space length: 3,550 mm, loading space width: 1,900 mm, loading space height: 1,850 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, tail-lift, Internal vehicle number: 4463 ----Why autonext GmbH? One of the largest commercial vehicle exhibitions in Germany. Over 400 vehicles available immediately at all times. Largest selection - Best prices. More than 1,000 satisfied customers per year - Top customer reviews. WhatsApp Chat: ### Special offer: Financing from 4.99% ### ----Good and well-maintained condition 1st owner, German vehicle, non-smoker vehicle Full service history, exclusively serviced at Mercedes-Benz Next service due in 412 days As-new brakes front and rear Automatic transmission Body type: Deep-freeze box Thermo King V300 MAX Optional: Factory-certified cooling maintenance available for only €899 Hydraulic tail lift "Bär" max. 750 kg Reversing camera Automatic climate control Cruise control Side door Loading bay length: 3.55 m Loading bay height: 1.85 m Loading bay width: 1.90 m ---- Special equipment: * MBUX multimedia system (7" touchscreen) * Bluetooth hands-free kit * Multifunction steering wheel * Second (auxiliary) battery in cabin * DAB tuner (digital radio) * Suspension: Stabilization Level I * Vehicle without start/stop function * 250 A alternator * Cruise control * Front cup holders * Terminal strip for electrical connections (under driver's seat box) Dodpfjwwamrsx Apwjut * Automatic climate control (Tempmatic) * Fuel filter with water separator * Dashboard charging package (extra USB ports and 12V outlet) * Engine front PTO with bracket for additional coolant compressor * Fog lights with cornering light * Spare wheel with operational tires * Spare wheel holder under rear frame incl. jack * Windscreen wipers with rain sensor * Seats in cab: double passenger seat * Seats in cab: comfort driver's seat * Additional battery isolation relay * Fleece battery 70 Ah Standard equipment: Overhead storage compartment above windscreen, glove compartment under dashboard passenger side, rear tow hook, adaptive brake light, driver airbag, hill-start assist, anti-lock braking system (ABS), traction control (ASR), drive type: rear-wheel drive, washer fluid level indicator, electrically adjustable & heated exterior mirrors both sides, outside temperature display, brake assist, cab roof lining, automatic headlight activation, electronic brake force distribution (EBV), electronic stability program (ESP), driver assistance system: crosswind assist, two electric windows, GTronic automatic transmission - (7-speed), bodywork/platform: flatbed, keyless start, communications module (LTE) for digital services, main fuel tank: 71 L, steering wheel (mechanically adjustable column), headlight leveling, HGV registration, side marker lights, Mercedes-Benz emergency call system, 2.1L engine - 120 kW CDI CAT, particulate filter, wheelbase: 3665 mm, Euro 6 emissions standard, driver seatbelt with warning system, seat trim/upholstery: fabric, cab seats: driver seat with armrest, daytime running lights, service interval display Assyst, immobilizer, heat-insulating glazing, central locking with remote control, permitted gross vehicle weight 3.50 t. ----Upon request, new general inspection (HU/AU). ----Warranty & "TÜV Profi Check" are of course available from us! We will be happy to accept your vehicle as a trade-in! We can also provide you with a tailored financing or leasing offer! No down payment, can be repaid at any time and with special repayments possible.

Condition: used, mileage: 108,050 km, power: 120 kW (163.15 HP), first registration: 01/2020, fuel type: diesel, overall weight: 5,000 kg, color: black, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 6,946 mm, total width: 2,135 mm, total height: 2,451 mm, loading space length: 4,200 mm, loading space width: 2,300 mm, loading space height: 2,100 mm, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, tail-lift, Internal vehicle number: 8969 ----Why autonext GmbH? One of the largest commercial vehicle exhibitions nationwide Always over 400 vehicles immediately available Largest selection - Best price More than 1,000 satisfied customers per year - Top customer reviews WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Good and well-maintained condition First owner, German vehicle, non-smoker vehicle Fully maintained with a complete service history, exclusively at Mercedes-Benz Next service due in 365 days Reversing camera Body: Deep-freeze box body Standby cooling + engine-driven cooling ThermoKing refrigeration unit V200 MAX Model 50 Refrigerant: R-404A/ R-452A Optionally, we offer a manufacturer refrigeration maintenance for only €899. Hydraulic tail lift "Bär" (750 kg) Partition wall in load compartment Rear portal doors Side door Rear access aid ---- Special equipment: * Multimedia system MBUX (7" touchscreen) * Bluetooth hands-free system * Multifunction steering wheel * 1 DIN slot front under roof liner Djdpfx Asw Eg E Dspwsut * Second battery (auxiliary battery) in cabin * Co-driver optimized shift console (without storage compartment, right center console) * Suspension: Stabilization level II * Flip lid for storage compartment * Terminal strip for electrical connections (driver's seat base) * Fuel filter with water separator * Radiator grille frame in vehicle color * Engine PTO front with bracket for additional cooling compressor * Wipers with rain sensor * Front mud flaps * Seats in cab: co-driver double seat * Seats in cab: comfort suspension seat, driver's side * Relay for additional battery * Rear wall paneling * Fleece battery 92 Ah Standard equipment: Storage compartment above windscreen, storage compartment below passenger-side dashboard, rear towing eye, adaptive brake light, driver's airbag, anti-lock braking system (ABS), traction control (ASR), drive type: rear-wheel drive, washer fluid level indicator, electrically adjustable and heated exterior mirrors (both), outside temperature display, roof lining in driver's cab, automatic headlights, electronic brake force distribution (EBV), electronic stability program (ESP), driver assistance system: active brake assist, driver assistance system: crosswind assist, driver assistance system: lane keeping assist, digital tachograph, download capable, electric windows (2), 6-speed manual gearbox (Eco Gear), body/chassis: platform truck, keyless start, communication module (LTE) for digital services, fuel tank: main tank 71 liters, steering wheel/column mechanically adjustable, headlight range adjustment, truck registration, side marker lights, Mercedes-Benz emergency call system, engine 2.1L - 120 kW CDI CAT, particulate filter, wheelbase 4325 mm, low emissions per Euro 6 standard, driver's seatbelt system with warning device, seat covering/upholstery: fabric, driver's seat in cab with armrest, engine start/stop system, daytime running lights, rear underride protection, DAB radio preparation, service interval display (Assyst), immobilizer, thermal insulation glazing (windscreen with upper band filter), central locking with remote control, GVWR 5.00 t ----New general inspection (HU/AU) on request. ----Warranty & "TÜV Profi Check" are, of course, available! We are happy to accept your vehicle as a trade-in! We can also provide you with an individual financing or leasing offer! No down payment, redeemable at any time and with special repayment options.

Condition: refurbished (used), Year of construction: 2025, operating hours: 12 h, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, workpiece weight (max.): 15 kg, warranty duration: 12 months, total height: 2,000 mm, type of input current: AC, total width: 1,000 mm, total length: 800 mm, overall weight: 800 kg, input voltage: 230 V, Equipment: documentation/manual, lighting, type plate available, Mahr Multiscope 400 Multisensor Measuring Device equipped with camera and Renishaw touch probe system Fully functional with factory acceptance before delivery! Dsdpew Slafjfx Apwout Comprehensive maintenance history Measuring range: 400x200x200 mm Maximum workpiece weight (glass plate): 15 kg Instrument weight: 800 kg Control cabinet weight: 90 kg External dimensions: 800x1000x2000 mm Maximum traverse speed: 150 mm/s Accuracy: U1=1.9 + L/200; U2=2.4 + L/150; U3=2.9 + L/100 (L = measurement length in mm) Factory-refurbished premium multisensor measuring center with warranty and guarantee, rebuilt 2025. Includes the latest software update for Windows 10 (Windows 11 upgrade and OptiCheck3D 2025 available as options), including free lifetime software hotline and user support. Optional: Delivery via factory service or forwarding agent, worldwide. Optional: On-site commissioning & calibration Optional: Training service Online and on-site demos available with customer parts, application consulting by accredited Profitech metrology laboratories during project planning. Available complete service: – Delivery, installation, commissioning, acceptance according to standards, certification, and comprehensive acceptance documentation. Individual training and education programs also bookable as online courses. Creation of your measuring programs for direct operation with the device is also possible. Rental, lease-purchase, or financing possible directly via Profitech without any financial institution. The measuring device can be individually configured to customer requirements (within the EU). Reference number: 01814-1-ms400 (Please always include this with inquiries)

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 223A011235001, warranty duration: 12 months, frame height: 600 mm, frame width: 600 mm, Equipment: documentation/manual, Arch Size: 600 x 600 mm Strap width: 5-9 mm Year: 2012 Machine-No.: 223A011235001 Condition: Refurbished Our latest project was the refurbishment of this fully automatic strapping machine SMB CUBE 600x600c from 2012. You might be able to see from the outside and from the price that this CUBE is a second-hand machine, but when you look at the list of spare parts and labour hours used, it becomes clear: this machine has been extensively refurbished to its original condition and is now as good as new; perhaps even a little better. As good as new with the CUPASO refurbishment With our reconditioned used machines, you get as-new technology at used machine prices. We make sure that we only refurbish technology that still meets today's requirements. This also applies to the SMB CUBE 600x600c offered here. We also offer you our comprehensive service for this refurbished device. In addition to our 12-month guarantee, this includes the long-term supply of consumables, spare parts and technical service. Prepared for integration into automated packaging lines Even as a stand-alone machine, this CUBE can be customised to your requirements. The machine detects incoming parcels or product stacks and straps them once or several times according to the previously defined parameters. With the help of the pneumatic package press and the package height-dependent strap tension, packages of different sizes and characteristics can be processed unsorted and individually. By adding a machine of the same design, which is also available from us, it is even possible to realise cross or multiple strapping at high speeds. This is what we promise Our guarantee commitment of a full 12 months of course also applies to our SMB CUBE 600x600c. This means you are on the safe side. If something should break during this period, we will replace the defective component and install it at our expense (excluding wear and tear and travel). And if you decide quickly, you will receive our exclusive pre-sale discount of 10%. Do you have any questions? We look forward to your call or e-mail and will be happy to show you our current projects and new equipment in our showroom. Why don't you come and visit us? Features: • Economical due to maximum availability • Robust and extremely low-maintenance design • Simplest handling • Minimal space requirement • Best cost/benefit ratio • Max. 35 parcels/min; depending on back-tensioning path and frame size, without package pressing • Mobile machine (2 fixed/ 2 steerable rollers with brake) • Table height 770 -1000mm • Driven conveyor belts • Machine colour: Frame RAL 7004 / Frame RAL 7016 Special features: • Signal exchange: 2 x counter plug with tool • Additional light sensor for mounting on leading or following machine • Signal exchange: Do not strap package • External button: Do not strap package • Package height-dependent belt tension (laser sensor) • Pneumatic package press (600x600) Duedpfxot Uzv Ts Apwjt • Double press bar 600 • Draw-in protection on table top, infeed side

Condition: used, mileage: 251,000 km, power: 100 kW (135.96 HP), first registration: 05/2020, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,548 mm, total width: 2,070 mm, total height: 2,499 mm, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, For sale here is a well-maintained Renault Master Panel Van L2-H2 equipped with the globally popular 2.3 litre diesel engine. * The vehicle is in good condition * German specification vehicle * Regularly serviced * Euro 6 emissions standard * First owner Equipment: * Panel van L2-H2 * Air conditioning * Cruise control * Tow bar * Sliding doors on both sides * Rear parking sensors Dedpfxjyi Rhie Apweut * Registered as a commercial vehicle * Heated exterior mirrors * Electrically adjustable exterior mirrors * Electric windows * Central locking * and much more... Technical data: Permissible total weight: 3,500 kg * Unladen weight: 2,050 kg * Payload: 1,450 kg * Braked towing capacity: 2,500 kg Why choose us? Attractive financing options via our partner bank * Nationwide delivery of your desired vehicle * Trade-in of your old vehicle at fair conditions * Export license plates (5-day/ customs registration) usually available same day * Pickup service from airport or train station All vehicles are professionally reconditioned and hygienically clean! Special features: Disinfection of the interior and ventilation system using ozone cleaning. 2-stage exterior polish; paint correction and smart repair where necessary. All our vehicles have also undergone thorough maintenance. Of course, including new fluids, filters, and other necessary work you shouldn’t have to worry about. We can optionally present the vehicle at an independent testing centre or workshop of your choice. We are pleased to have sparked your interest and are at your full disposal around the clock. If you have questions, comments or special requests, please do not hesitate to contact us! More information and insights into our business philosophy available on request. Special Equipment: Rear parking sensors, rear wing doors with windows, wooden floor in the load compartment, interior trim on bulkhead, load compartment bulkhead with window (grilled), full wheel covers, sliding door left-hand side (load/passenger area), lumbar support driver’s seat, lashing eyes on sidewalls in load compartment Further features: Overhead storage shelf, driver airbag, exterior mirrors electrically adjustable and heated, outside temperature display, brake assist, tachometer, electronic brake-force distribution, pollen filter interior filter, body type: standard high roof panel van, fuel tank: 105 litres, radiator grille with chrome trim, height-adjustable steering column, model update (2), engine 2.3 l – 99 kW dCi diesel CAT, wheelbase 3,682 mm, tyre repair kit, low emissions in accordance with Euro 6d-TEMP, gear shift indicator, right-hand sliding door (load/passenger area), front mud flaps, side protection strips, seat trim/upholstery: fabric, passenger cabin: multifunctional dual passenger seat, driver’s seat height adjustable, LED daytime running lights, lashing points on load compartment floor, thermal insulation glazing, GVWR 3.5 t

Condition: new, Portal machine - the space miracle! CNC portal milling machine for large traverse paths with small space requirements! ADVANTAGES: -optimized space utilization, completely free table clamping area -best possible chip protection due to overhead axes -particularly suitable for high and bulky components -PILZ safety technology -Windows 10 APPLICATIONS: -chipping -measuring and testing Dodpfx Aehqhlvjpweut -dosing applications FOR MACHINING: -Aluminum / light metals -Milled plastics -Ceramics -Non-ferrous metals (brass, bronze, etc...) -Plastics -Wood Maximum functionality with minimum space requirements is the motto of the OverHead Gantry M. The basic machine can be optimally configured for many sectors and work areas using a variety of variable equipment features and additional options. The possible applications of the OverHead Gantry M include measuring, testing and metering applications in addition to machining. The power of the milling motor of up to 2.2 kW and 20,000 rpm and a traverse speed up to 250 mm/sec make it suitable for processing wood and plastic as well as light and non-ferrous metals. The free processing area and its excellent price/performance ratio off er decisive benefits compared to similar products. The OverHead® Gantry M is available in five different sizes for different process areas from M20 to M50. Do you require the control cabinet on the right-hand side or would you prefer the control panel to be on the left? No problem – we will be happy to accommodate your requirements. And of course we will take care of maintenance and support for your OverHead® Gantry M. Our service technicians can be reached by telephone and can attend to you quickly on-site as needed. In addition, we also off er our in-house isy-CAM 2.8 software and can advise you on your specific application. BENEFITS: -Optimal use of space -Free machining area -Fixed table, mobil portal -Variable clearance of 340- 590 mm -Also suitable for a large chip volumes SET UP: Portal: mobil, Table: Fixed

Condition: used, functionality: fully functional, color channels: 2 kleuren rechtdoor, paper weight (min.): 30 g/m², paper weight (max.): 350 g/m², paper width (min.): 148 mm, paper width (max.): 520 mm, paper height (min.): 100 mm, paper height (max.): 365 mm, total length: 2,765 mm, total width: 1,523 mm, total height: 1,560 mm, space requirement length: 2,765 mm, space requirement width: 1,523 mm, space requirement height: 1,560 mm, type of input current: three-phase, input current: 20 A, input voltage: 200 V, Equipment: documentation/manual, 2-colour offset press in high-quality construction with hardened and ground gears, cylinders run in class P5 pre-stressed conical roller bearings (sets of 2) and lubricated in oil bath and pressure lubrication. B3 format (35x50 cm) in conventional standard design (no autoplate and/or cocking) but alcohol film dampening with large rollers according to SM52 construction, prints very nicely Originating from 1st owner who did not maintain the machine properly (visually); an extensive maintenance history has been carried out by the importer. The last counter reading in the history is 11.6 Mln from 2003. Due to illness and outsourcing, the previous owner, a printing broker, has hardly used the machine since then. We will check the machine on the current counter reading and ensure correct and proper operation. C)2 dry ice cleaning is still being considered as well as overhauling the entire machine, because the mechanical condition is exceptionally good. This is however cost increasing so the machine is now offered for the cheapest option, that is "as it is", EXW our warehouse in Son, NL. Any type of inspection is of course allowed. We guarantee the machine as free from breakage, cylinder damage and/or repair and damage free to gears. The rubber rollers are vitrified and need to be replaced. The Royce ECO circulation and cooling installation for the dampening work shows signs of corrosion. Some specs, for all specs open the PDF at the bottom of this page. Maximum printing speed 12,000 sheets per hour Maximum paper size 365 x 520 mm Minimum paper size 100 x 148 mm or 148 x 100 mm Maximum printing surface 350 x 510 mm Dedov Nv Tajpfx Apweut Rubber cloth size 500 x 520 x 1.9 mm Plate size 400 - 410 x 510 mm Dampening rollers in this case of film dampening is 1 (62mm) Number of ink feed rollers 4 pieces of 46, 48, 52 and 54 mm Inlay stack height maximum 850 mm Explanation stack height max 360 mm Electrical connection 3 phases 200 VAC 50HZ (primary) but there is a transformer for conversion from 3 x 415/400/380/230 VAC to 200VAC Power consumption in total 7kW Primary fuse in any case 20A Dimensions LxWxH = 2765 x 1523 x 1560 mm Net weight 4000 kg

Condition: new, Year of construction: 2026, For sale is a new Optitek PUR high-pressure foaming unit -- Model HD-Kompakt OPT PP 16/16 -- The compact high-pressure foaming unit from Optitek is a true space-saving solution. This technologically advanced system, with dimensions of 210 cm x 210 cm, is mounted on a base frame with integrated drip trays. Despite its minimal footprint, the unit is designed for ease of maintenance and operator-friendly handling. In line with OPTITEK GmbH’s high quality standards, only original parts from leading global manufacturers are used. Compliance with the highest safety standards is, of course, a given. The comprehensive standard features include: >> Ergonomic control panel with a high-quality 15" touchscreen of the latest generation Dsdsyr R A Sopfx Apwsut >> Electrical cabinet cooling >> Extensive process data acquisition >> High metering accuracy thanks to state-of-the-art pump technology >> Day tanks including material temperature control, with a volume of 250 liters >> Gear agitator on the polyol side, including inclined blade mixing device >> Automatic filter with scraper cleaning system >> Compact mixing head hydraulic unit with integrated cooling For any further questions, we are available at any time and look forward to your inquiry.

Condition: like new (used), Year of construction: 2024, As-new polishing machine OPTIMUM OPTIpolish GZ40P with variable-speed conversion featuring Siemens inverter and cyclone extraction system. For polishing wheels with a diameter of up to 350mm, maximum wheel width 35mm, wheel bore 20mm. Suitable for continuous and intensive industrial use. Heavy-duty industrial polishing machine; its high dead weight absorbs the already minimal vibrations. Maintenance-free, long-life induction motor with smooth operation, cast iron housing. Additionally equipped with: Variable speed drive using Siemens Sinamics V20 inverter. Circumferential speed adjustable from 34 m/s down to 6 m/s. Sturdy base with cyclone extraction integrated in the base, thus requiring minimal space. Sound-insulated. The base must be filled with concrete by the customer. Automatic start/stop feature: When the external device is powered on or off, the extraction system automatically switches on or off with a 2-3 sec delay. There is no need to operate the extraction system separately. According to hazardous substance regulations, residual dust is extracted after the machine shuts down. Dodjyglkyspfx Apwjut The machine is located at 71334 Waiblingen-Beinstein and can, of course, be inspected by appointment. Please contact us for further information.

Condition: used, Year of construction: 2025, overall grade 1-5 (1 bad, 5 like new): 5/5 certificates: CE, TÜV New in our assortment The Fronteq FS507T tracked scissor lift Max working height 6.70cm Platform height 4.70 cm Machine length 1.50cm Total width 0.81 cm Total height 2.07 cm Length platform retracted 1.31cm Platform length extended 1.81 cm Own weight 900 kg Due to the size of the FS0507T, the aerial work platform fits through any pedestrian door. Own weight 900 kg, so it can be transported behind any car. Ideal for working with 2 people in the man box capacity of a total of 200 kg. The man box is also extendable to 1.81 cm. The FS0507T is fully electric, therefore emission-free, odorless and completely up-to-date. The FS507T is equipped with non-marking tracks, so no black stripes on your concrete floor. The FS0507T is super manoeuvrable and can rotate around its own axis. Equipped with built-in 220v charger. We supply the TS0507T with 2 years. manufacturer's warranty and 1-year TUV inspection. Of course we can arrange transport to your location for you. Leasing from 200 euros per month Ask about the conditions. If you are interested and would like a demo, please contact Fronteq Europe. D. van der Wijk District trading / fronteq europe working height: 670 cm Type: Electric Final inspection: 2020 Maintenance history: Yes Total weight gvw: 900 kg Maximum lifting capacity: 200 kg Type of drive: Caterpillar drive Original color: green Dimensions (lxwxh): 0x0x0 mm Conditions info/warranty: 1 Production country: China Working height: 670 cm Power type: Electric Latest inspection: 2020 General grade (1 min - 5 max): 5/5 Full service history: Yes Gross weight: 900 kg Maximum lift capacity: 200 kg Traction type: Tracked Transport dimensions (lxwxh): 0x0x0 mm Djdpfjxb Rgusx Apweut Condition info/guarantee: 1

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with XPLANE cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm Dedpfxeqlck No Apwout - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: Xplane solid steel cutterblock Cutterblock with 3 spiral rows of knives (33 cambered hard metal knives per row), delivery includes full set of knives and a Torx T20 T-wrench; shaft speed 6,000 rpm included; The emission sound pressure level LpA during processing is reduced by 10 dB(A) - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, table surface precision-planed - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at the infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with Tersa cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. Dusdpfx Apsqlckpswst reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. blocking for easy cutter change - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, finely planed table surface - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Martin T 45 thickness planer with Tersa cutterblock Accessories: 7,5 KW The T45 thickness planer offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg Dsdpfxjqlclbj Apweut - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. blocking for easy cutter change - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, finely planed table surface - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, SCHORR track dumper with tipping hydraulics and ride-on platform 500 kg load capacity 9.2 hp engine -- Self-propelled & powerful caterpillar drive -- Large & high-quality tipper body -- Folding ride-on platform fitted as standard -- Width of only 680mm -- Top price-performance ratio -- NEW & IMMEDIATELY AVAILABLE! The SCHORR track dumper RR500DHKA has a hydraulic tilt drive and a payload of 500 kg as well as a powerful 9.2 HP single-cylinder 4-stroke gasoline engine. Thanks to its slim design (680 mm), the minidumper can also drive through narrow paths and doors, making it an extremely flexible means of transportation. Thanks to the minidumper's powerful track drive, you can also overcome rough terrain, inclines and kerbs with ease. The rubber tracks provide a secure footing in any working area. Lifting and lowering the tipper body is effortless and requires little effort thanks to the hydraulic tipper drive, even when fully loaded. Another advantage of the minidumper is its extra-large hydraulic oil tank with oil filter. This ensures a long service life for the machine and minimizes maintenance requirements. With a robust body made of thick sheet metal and a straight outlet that ensures quick and easy draining, this dumper is a must for anyone who needs to transport heavy loads. Even tipping on slight inclines is no problem. The large tipping angle ensures that even fully loaded skips are emptied completely without you having to help manually. This saves time and effort and makes the minidumper an indispensable tool for anyone who values efficiency and performance. SCHORR minidumper - The advantages at a glance: -- Self-propelled & powerful caterpillar drive -- Large and high-quality tipper body -- Folding ride-on platform fitted as standard Technical data: Load capacity: 500kg Weight: 280kg Tilt drive: Hydraulic Engine: 9.2 HP (Loncin, 270cc) Starter: Cable starter Length: 950mm Width: 680mm Height: 465mm Tire size: 180mm Pump flow rate: 9 L/min. 3 forward gears 1 reverse gear Removable trough Type of packaging: Plywood box Packaging size: 167x77x113cm Our minidumper is extremely maneuverable and is often used on construction sites, in agriculture and forestry or in gardening and landscaping as well as for conversion work. Of course, we always have all spare parts in stock and can deliver them quickly if you do have a problem. If you need technical support, we have the necessary technical expertise and can also carry out repairs in our in-house workshop. In order to make collections and inspections as convenient as possible for you, we would like to point out that these are only possible by telephone appointment. Duodpfxsmv Evrj Apwjt Would you prefer to finance or lease the appliance? No problem! We also offer you attractive options for this. Simply contact us and we will advise you on the various options. We look forward to hearing from you! We at SCHORR will be happy to answer any questions you may have about our minidumpers. You can reach our competent team by phone or email. We look forward to hearing from you and being able to help you with advice.

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 20 h, Powerful tracked dumper in top condition for sale! The unit is in very good condition and ready for immediate use. Condition: Used, very good Operating hours: 20 hours Year of manufacture: 2025 SCHORR tracked dumper with hydraulic tipping system and ride-on platform, 500 kg load capacity, 9.2 HP engine -- Self-propelled and powerful tracked drive -- Large and high-quality tipping hopper -- Foldable ride-on platform installed as standard -- Width of only 680 mm -- Excellent value for money -- NEW & IMMEDIATELY AVAILABLE! The SCHORR RR500DHKA tracked dumper features a hydraulic tipping system and a payload of 500 kg, as well as a powerful 9.2 HP single-cylinder 4-stroke gasoline engine. Thanks to its slim design (680 mm), the mini dumper can also navigate narrow paths and doorways, making it an extremely flexible means of transport. The mini dumper's powerful track drive allows you to easily negotiate rough terrain, inclines, and curbs. The rubber tracks provide secure footing in any work area. Raising and lowering the dump body is effortless and effortless thanks to the hydraulic tilt drive, even when fully loaded. Another advantage of the mini dumper is its extra-large hydraulic oil tank with oil filter. This ensures a long service life of the unit and minimizes maintenance requirements. Dusdpfxjwh Ndus Apwet With a robust dump body made of heavy-duty sheet metal and a straight outlet that ensures quick and easy drainage, this dumper is a must-have for anyone who needs to transport heavy loads. Tipping on gentle inclines is also no problem. The large tipping angle ensures that even fully loaded dump bodies are completely emptied without the need for manual assistance. This saves time and effort, making the mini dumper an indispensable tool for anyone who values efficiency and performance. SCHORR Mini Dumper - The advantages at a glance: -- Self-propelled and powerful crawler drive -- Large, high-quality tipping trough -- Foldable ride-on platform installed as standard Technical specifications: Load capacity: 500 kg Weight: 280 kg Tipping drive: Hydraulic Engine: 9.2 HP (Loncin, 270 cc) Starter: Pull start Length: 950 mm Width: 680 mm Height: 465 mm Tire size: 180 mm Pump flow rate: 9 L/min 3 forward gears 1 reverse gear Removable dump truck Packaging type: Plywood crate Packaging dimensions: 167 x 77 x 113 cm Our mini dumper is extremely maneuverable and is frequently used on construction sites, in agriculture and forestry, gardening and landscaping, and during renovation work. Of course, we always have all spare parts in stock and can deliver them quickly should you ever encounter a problem. Should you need technical support, we have the necessary technical expertise and can also carry out repairs in our in-house workshop. To make pickups and viewings as convenient as possible for you, we kindly inform you that these are only possible by appointment. We at SCHORR are happy to answer any questions you may have about our mini dumpers. You can reach our competent team by phone or email. We look forward to hearing from you and being able to assist you with your consultation.

Condition: new, Year of construction: 2025, functionality: fully functional, pressing force: 150 t, operating speed: 200 mm/s, total length: 3,770 mm, total width: 1,855 mm, total height: 2,540 mm, overall weight: 8,500 kg, working width: 3,100 mm, back gauge: 1,000 mm, distance between stands: 2,600 mm, HACO OPTIFORM 30150 (IN STOCK) HACO OptiForm. Compact, powerful and quickly available. With over 60 years of experience in sheet metal working, HACO introduces the new OptiForm press brake: a compact, high-quality machine built in Europe that combines premium performance with a surprisingly competitive price. Despite its compact size, the machine is built on the basis of the proven technology of the Synchromaster series. Think of the same hydraulic connections and high-quality components – a solid basis for reliability and a long service life. Press brake features: Dsdpfx Aewnddvepwsut Working length: 3100 mm Capacity: 150 tons Distance between the cheeks: 2600 mm C-frame discharge: 400 mm Daylight opening: 480 mm Table height: 965 mm Rapid travel Y-axis: 200 mm/s Press travel Y-axis: 10 mm/s Return travel Y-axis: 130 mm/s Motor power: 15.0 kW Total length: 3770 mm Total depth: 1855 mm Total height: 2540 mm Weight approx. 8,500 kg The machine is also equipped with: ===== - EASYBEND 2D CNC control - 4-axis back gauge X-R axis travel 1000 - CNC controlled crowning - Equipped with DSP lasersafe finger detection - Fast manual clamping for European Standard tools, intermediate pieces height 150 mm or 100 mm - Movable support arms Delivery + installation at your location is of course possible, delivery costs and additional costs in consultation. We have been the Dutch dealer for HACO press brakes and shears since 2019. In addition to the sale of sheet metal working machines, we offer a total package for service, maintenance and repairs.

Condition: used, functionality: fully functional, Year of construction: 2004, Shear: HACO TS 3006 Working length: 3050 mm Capacity regular steel: 6 mm (400 N/mm²) Back gauge length: 750 mm (motorized) Controller: SP 8 Blade clearance: manual Djdpfoxy Illex Apwjut Condition of blades: good Minimum cutting angle: 0.5° Maximum cutting angle: 3° Number of hold-downs: 13 Length and number of sheet supports: 8 × 500 mm, 1 × 1000 mm (left stop + measuring bar) Equipped with sheet support device: No Strokes per minute at smallest angle: 10-15 Strokes per minute at largest angle: 6 Working height: 770 mm Motor power: 7.5 KW Total length: approx. 3880 mm Total height: approx. 1700 mm Total width: 1650 mm Weight: approx. 4500 kg Year of manufacture: 2004 Delivery and installation at your location are of course possible; delivery charges and any additional costs in consultation. Since 2019, we have been the Dutch dealer for HACO press brakes and shears. In addition to selling sheet metalworking machines, we offer a complete package for service, maintenance and repairs.

Condition: good (used), Electrospindle Main spindle OMLAT IMA 12 KW The price includes the C-axis shown. If you only require the main spindle, we will of course grant a discount. 1st tool holder: Type: HSK F63, similar to DIN 69893 Taper diameter: 38 mm 2. tool retraction: Automatically controlled Pull-in force: 11000 N 3. tool weight: Maximum weight: 6 kg 4. direction of rotation: Dedpfjrhzlnex Apwout Right/left rotation, programmable 5. speed range: Infinitely adjustable from 1500 to 22000 revolutions per minute Programmable for individual requirements 6. drive: Frequency-controlled three-phase motor 7. drive power: 12 KW in S-1 operation 8. spindle lubrication: One-time factory grease lubrication for efficient maintenance 9. spindle cooling: Water cooling to maintain optimum operating temperatures 10. constant performance: Range from 12,000 to 22,000 revolutions per minute Spindle condition: Used but tested The main spindle was removed from a running system and carefully checked. As an alternative to new spindles, which are often not available, it guarantees immediate use and optimum reliability. This used spindle offers a cost-effective solution without compromising on performance.

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 7,792 h, load capacity: 4,000 kg, lifting height: 5,650 mm, load center: 500 mm, fuel type: gas, DGUV certified until: 11/2025, fork length: 1,600 mm, tire condition: 95 %, empty load weight: 7,183 kg, color: yellow, We are offering an absolutely top-condition forklift from Jungheinrich. In 2021, it underwent a complete 5-star refurbishment by Jungheinrich and has only run 45 hours since the overhaul. The paintwork is 100% original—there has been no respray or touch-up! The forklift has always been stored indoors and is in excellent condition. Maintenance and UVV inspection are up to date. The manual and keys are, of course, included. Last major service: October 2024 UVV valid until 10/2025 Operating hours: 7,792 (since refurbishment: 7,744) Model: TFG 540s SP G+E 120-565 DZ Type: LPG forklift Dedpsw N Iz Hofx Apweut Year of manufacture: 2012 / 5-star complete refurbishment 03/2021, equipped with Kaup fork positioner T466 Lifting capacity: 4,000 kg Lifting height: 5,650 mm Overall height: 2,640 mm Fork length: 1,600 mm Load center: 500 mm Mast: triplex with free lift Equipment: Solo-Pilot, road lighting (conforming to StVZO), LED version with 2 working lights front and rear each, front, cab roof, and rear windows Steel doors, leather seat, rear-view mirror, armrest, double auxiliary hydraulics (2 functions) Brand new Kaup fork positioner 4.8T 466B Since refurbishment, the truck has only accumulated 45 hours of operation, with all UVV and maintenance work carried out accordingly.