Used Graphite for sale (193)

Condition: new, mileage: 400 km, power: 345 kW (469.07 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), parking heater, soot filter, Vehicle: MAN TGS 26.470 6x4H-4 BL CH HydroDrive Vehicle Type: Flatbed truck and chassis, suitable for crane installation Chassis Color: Pure white RAL 9010 Cab Color: Graphite black RAL 9011 Engine Type: MAN D2676 LF85 Power: 346 kW (470 HP) Torque: 2,400 Nm Emissions standard: Euro 6d Transmission MAN TipMatic 12-speed automatic Reinforced single-plate clutch (430 mm) Drive modes: Efficiency, Manoeuvre, Idle Speed Driving, Rocking Chassis Wheelbase: 3,900 mm Rear overhang: 1,950 mm Main axle distance (between rear and trailing axle): 1,350 mm Frame height above cab: up to 4,000 mm Frame longitudinal member thickness: 8 mm Frame end: straight Axles Front axle: 9,200 kg, steered, HydroDrive without through drive Rear axle: 13,000 kg, HY axle, non-steered, non-driven Trailing axle: 9,000 kg, steered, liftable, non-driven Axle ratio: i = 3.70 Air Suspension Electronically controlled air suspension (ECAS) on trailing axle Automatic level control Spring load capacities: FA 9,500 kg / RA 13,000 kg / TA 8,000 kg Brakes Electronic Braking System (EBS) ABS, ASR High-performance engine brake MAN EVBec (multi-stage) Disc brakes on all axles Electronic parking brake Tyres and Rims Front axle: 385/55 R22.5, steel rims 11.75x22.5 Rear axle: Goodyear 315/70 R22.5, steel rims 9.00x22.5 Trailing axle: Michelin 315/70 R22.5, Alcoa matte Cab Type: FN, flexible, narrow, standard height Comfort seats: air-suspended, heated, with armrest Multifunction steering wheel Central locking Climatronic air conditioning Lower comfort bed Storage in seat console and storage boxes Interior styling: Moon Grey Sun blinds, tilting roof Various storage compartments USB ports LED lighting technology Permissible Loads Gross vehicle weight: 26,000 kg Axle loads: FA 9,000 kg / RA 11,500 kg / TA 7,500 kg Permissible trailer weight: max. 30,000 kg Tanks Fuel tank: 400 l AdBlue tank: 60 l Assistance Systems ESP, ASR, cruise control Emergency braking assistant Lane departure warning Digital tachograph Advanced navigation system (7 inch) MAN SmartSelect Body Interface Prepared for crane installation Trailer coupling: RINGFEDER type 4040G150A Various electrical and pneumatic connections Special Features HydroDrive: Hydraulic front axle drive for increased traction Driver comfort features Factory interfaces and preparations for municipal, construction, and special-purpose applications as well as flexible bodies ---- FASSI Loader Crane F545RA.2 xe-dynamic Base Unit Type: F545RA.2 xe-dynamic CE Directive EN 12999 HD5S2 compliant Color: RAL 3020 traffic red, cylinders black Slew Range Continuous rotation Hydraulics Double-acting hydraulic cylinders Piston rods hard-chromed Kinematics Double linkage system with PROLINK Articulated arm can be over-extended up to 15° Overload Protection Electronic overload cut-off FX500 FSC stability control LMB II Emergency stop and visual warning Valves & Filters Pressure relief and load-holding valves High-pressure filter Separate hydraulic tank 180 l with filter and oil cooler at the base Control Ljdpjxwrblofx Ahzerg FASSI radio remote control RCH/RCS Pressure value display Danfoss D850 control block with 4 control valves Emergency control Stabilizers Hydraulically extendable on both sides Stabilizer spread: 7.79 m Speed Control Dynamic Control

Condition: new, mileage: 400 km, power: 345 kW (469.07 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), parking heater, soot filter, Vehicle: MAN TGS 26.470 6x4H-4 BL CH HydroDrive Vehicle Type: Flatbed truck and chassis, suitable for crane installation Chassis Color: Pure white RAL 9010 Cab Color: Graphite black RAL 9011 Engine Type: MAN D2676 LF85 Power: 346 kW (470 HP) Torque: 2,400 Nm Emissions standard: Euro 6d Transmission MAN TipMatic 12-speed automatic Reinforced single-plate clutch (430 mm) Drive modes: Efficiency, Manoeuvre, Idle Speed Driving, Rocking Chassis Wheelbase: 3,900 mm Rear overhang: 1,950 mm Main axle distance (between rear and trailing axle): 1,350 mm Frame height above cab: up to 4,000 mm Frame longitudinal member thickness: 8 mm Frame end: straight Axles Lodpoxwra Iofx Ahzsrg Front axle: 9,200 kg, steered, HydroDrive without through drive Rear axle: 13,000 kg, HY axle, non-steered, non-driven Trailing axle: 9,000 kg, steered, liftable, non-driven Axle ratio: i = 3.70 Air Suspension Electronically controlled air suspension (ECAS) on trailing axle Automatic level control Spring load capacities: FA 9,500 kg / RA 13,000 kg / TA 8,000 kg Brakes Electronic Braking System (EBS) ABS, ASR High-performance engine brake MAN EVBec (multi-stage) Disc brakes on all axles Electronic parking brake Tyres and Rims Front axle: 385/55 R22.5, steel rims 11.75x22.5 Rear axle: Goodyear 315/70 R22.5, steel rims 9.00x22.5 Trailing axle: Michelin 315/70 R22.5, Alcoa matte Cab Type: FN, flexible, narrow, standard height Comfort seats: air-suspended, heated, with armrest Multifunction steering wheel Central locking Climatronic air conditioning Lower comfort bed Storage in seat console and storage boxes Interior styling: Moon Grey Sun blinds, tilting roof Various storage compartments USB ports LED lighting technology Permissible Loads Gross vehicle weight: 26,000 kg Axle loads: FA 9,000 kg / RA 11,500 kg / TA 7,500 kg Permissible trailer weight: max. 30,000 kg Tanks Fuel tank: 400 l AdBlue tank: 60 l Assistance Systems ESP, ASR, cruise control Emergency braking assistant Lane departure warning Digital tachograph Advanced navigation system (7 inch) MAN SmartSelect Body Interface Prepared for crane installation Trailer coupling: RINGFEDER type 4040G150A Various electrical and pneumatic connections Special Features HydroDrive: Hydraulic front axle drive for increased traction Driver comfort features Factory interfaces and preparations for municipal, construction, and special-purpose applications as well as flexible bodies ---- FASSI Loader Crane F545RA.2 xe-dynamic Base Unit Type: F545RA.2 xe-dynamic CE Directive EN 12999 HD5S2 compliant Color: RAL 3020 traffic red, cylinders black Slew Range Continuous rotation Hydraulics Double-acting hydraulic cylinders Piston rods hard-chromed Kinematics Double linkage system with PROLINK Articulated arm can be over-extended up to 15° Overload Protection Electronic overload cut-off FX500 FSC stability control LMB II Emergency stop and visual warning Valves & Filters Pressure relief and load-holding valves High-pressure filter Separate hydraulic tank 180 l with filter and oil cooler at the base Control FASSI radio remote control RCH/RCS Pressure value display Danfoss D850 control block with 4 control valves Emergency control Stabilizers Hydraulically extendable on both sides Stabilizer spread: 7.79 m Speed Control Dynamic Control

Condition: new, mileage: 400 km, power: 345 kW (469.07 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Vehicle: MAN TGS 26.470 6x4H-4 BL CH HydroDrive Vehicle Type: Platform truck and chassis, suitable for crane installation Chassis Color: Pure White RAL 9010 Cab Color: Graphite Black RAL 9011 Engine Type: MAN D2676 LF85 Power: 346 kW (470 hp) Torque: 2,400 Nm Emission Standard: Euro 6d Transmission MAN TipMatic 12-speed automatic Reinforced single-disc clutch (430 mm) Driving Modes: Efficiency, Manoeuvre, Idle Speed Driving, Rock-Free Ljdexwra Uspfx Ahzsrg Chassis Wheelbase: 3,900 mm Rear overhang: 1,950 mm Main axle spacing (between rear and trailing axle): 1,350 mm Frame height above cab: up to 4,000 mm Frame rail thickness: 8 mm Frame end: straight Axles Front axle: 9,200 kg, steered, HydroDrive without through drive Rear axle: 13,000 kg, HY axle, non-steered, non-driven Trailing axle: 9,000 kg, steered, liftable, non-driven Axle ratio: i = 3.70 Air Suspension Electronically controlled air suspension (ECAS) on trailing axle Automatic leveling control Spring load capacity: FA 9,500 kg / RA 13,000 kg / TA 8,000 kg Brakes Electronic Braking System (EBS) ABS, ASR High-performance engine brake MAN EVBec (adjustable) Disc brakes on all axles Electronic parking brake Tyres & Rims Front axle: 385/55 R22.5, steel rims 11.75x22.5 Rear axle: Goodyear 315/70 R22.5, steel rims 9.00x22.5 Trailing axle: Michelin 315/70 R22.5, Alcoa matte finish Cab Type: FN, flexible, narrow, standard height Comfort seats: air-suspended, seat heating, armrest Multifunction steering wheel Central locking Climatronic air conditioning Lower comfort bed Storage in seat console and storage compartments Interior styling: Moon Grey Sun blinds, tilting roof Various storage solutions USB sockets LED lighting technology Permissible Loads Gross vehicle weight: 26,000 kg Axle loads: FA 9,000 kg / RA 11,500 kg / TA 7,500 kg Technical trailer load: max. 30,000 kg Tanks Fuel tank: 400 l AdBlue tank: 60 l Assistance Systems ESP, ASR, cruise control Emergency brake assist Lane departure warning Digital tachograph Advanced navigation system (7-inch) MAN SmartSelect Body Interfaces Prepared for crane installation Trailer coupling: RINGFEDER type 4040G150A Various electrical and pneumatic connections Special Features HydroDrive: hydraulic front-axle drive for increased traction Driver comfort features Factory interfaces and preparations for municipal, construction, and government applications as well as flexible body solutions ---- FASSI Loader Crane F545RA.2 xe-dynamic Base Unit Type: F545RA.2 xe-dynamic CE Directive EN 12999 HD5S2 compliant Colour: RAL 3020 traffic red, cylinders black Slewing Range Infinitely rotatable Hydraulics Double-acting hydraulic cylinders Piston rods hard-chromed Linkage System Double linkage system with PROLINK Articulated arm can be overextended up to 15° Overload Protection Electronic overload shutdown FX500 FSC stability control LMB II Emergency stop and visual alarm Valves & Filters Pressure relief and load-holding valves High-pressure filter Separate hydraulic tank 180 l with filter and oil cooler at base Control FASSI radio remote control RCH/RCS Pressure value display Danfoss D850 control block with 4 control valves Emergency operation Stabilizers Hydraulically extendable on both sides Support width: 7.79 m Speed Control Dynamic Control – load-dependent Additional Articulated Boom / Jib Type: L214 4x hydraulically extendable up to 10.30 m

Condition: reconditioned (used), Year of construction: 2023, All wear parts new only 704 operating hours Special price for a low-hour demonstration unit Base machine: €29,990 net Optional extras (for an additional charge): - Cooling unit: €3,995 net - Emulsion tray: €3,990 net The hydraulic briquetting presses of the MPP NEM series compact materials such as aluminum, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are distinguished by their robust construction, ensuring consistent briquette quality during continuous operation. The pressing process does not require any binding agents – compaction is achieved solely through hydraulic pressing force. Depending on material, the feedstock volume can be reduced by up to 90%. Throughput capacity: maximum 70 kg/h (depending on material) Briquette diameter: Ø 50 mm Motor: 5.5 kW 400 Volt / 50 Hz / 3-phase Pump: 40 liters Lrsdpfod N Dnhex Ahzeg Maximum briquette length: 50 mm Optimal briquette length: 40 mm Silo diameter: 1,000 mm Oil tank: 110 liters Dimensions: 1750 x 1130 x 1100 mm (L x W x H) Weight: 950 kg Hydraulic pre-compaction via slide Main press cylinder Vertical cylinder Fill level sensor: yes Feed material requirements: - Max. chip length: 15 mm - Installation room temperature: heated space, at least +5°C - Max. load on agitator: 150 kg - Feed material must be free from magnetic metals and mineral contaminants such as sand, stones, etc. Damage to pressing tools and/or increased wear may otherwise occur.

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, AGIETRON Hyperspark 2 HS Year of manufacture: 2006 Travel paths: X = 350 mm, Y = 250 mm, Z = 350 mm Max. workpiece dimensions (L x W x H): 650 x 580 x 250 mm or 820 x 420 x 250 mm Max. workpiece weight: 400 kg Distance from table to quill: 170–520 mm Quill with automatic chuck of your choice (Erowa / 3R Systems) Lredext H Ncopfx Ahzeg Without electrode changer – robot available on request Work tank is lowerable for optimal accessibility Incl. C-axis for rotation, indexing, and EDM (U = 0–60 rpm) AGIE IPG high-performance generator with 72 A Material removal rate copper/steel: 450 mm³/min Material removal rate graphite/steel: 530 mm³/min Best achievable surface finish Ra 0.2 µm Net machine weight: 3,200 kg Machine dimensions (L x W x H): 2,689 x 1,855 x 2,593 mm The machine is in stock with us and has already been cleaned, serviced, and tested. We are happy to perform an individual test for you as well. Including 6-month warranty on spare parts We can also offer you on-site commissioning and operator training. Optional: Transport, chiller, oil, clamping devices

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 800 kg, total height: 2,965 mm, total width: 2,135 mm, total length: 2,855 mm, quill stroke: 500 mm, workpiece length (max.): 880 mm, workpiece width (max.): 680 mm, workpiece height (max.): 350 mm, overall weight: 3,900 kg, Sinker EDM Machine AGIE Impact 3 Year of manufacture: 2003 Travel paths (X/Y/Z): 500 x 350 x 500 mm Max. workpiece dimensions: 1070 x 530 x 350 mm or 880 x 680 x 350 mm Lredpfx Ahjxt H Irezog Max. workpiece weight: 800 kg Internal dimensions of work tank: 1090 x 730 x 490 mm Programmable fluid level: 0-390 mm Including C-axis with 0-60 RPM Max. electrode weight on C-axis: 50 kg Without electrode changer Average discharge current: 72 Amps Material removal rate copper-steel: 450 mm³/min Material removal rate graphite-steel: 530 mm³/min Machine dimensions: 2855 x 2135 x 2965 mm Machine weight: 3900 kg The machine is in stock, has been cleaned, overhauled and tested. We are happy to perform a custom test for you and advise you regarding your application. We also offer commissioning and warranty upon request.

Condition: like new (used), Year of construction: 2022, operating hours: 3,973 h, functionality: fully functional, Worktable size: 700 x 500 mm Travel (X, Y, Z): 400 x 300 x 300 mm Maximum electrode weight: 50 kg Maximum workpiece size: 900 x 650 x 350 mm Machine dimensions (L x W x H): 2315 x 2200 x 2420 mm Machine weight: 3,500 kg Controller: MITSUBISHI M800 D-Cubes CNC Dimensional accuracy: X, Y, Z / C: 0.1 µm / 0.0001° Standard accessories: Lrodjx Sd N Tspfx Ahzjg - MITSUBISHI M800 D-Cubes CNC controller with 19" color multi-touch screen - FUZZY LOGIC control design - GV80 high-performance pulse generator - IDPM3 generator (standard) for graphite electrode machining, controls processing, reduces machining time and electrode wear - ESPER D-Cubes integrated programming system - Linear scale on Z axis - Controlled "C" axis with EROWA quick-clamping for positioning - Dielectric cooling system - Automatic central lubrication - Fire extinguishing system - Wide linear guides (THK) - Large-diameter direct-drive ball screw - CE-compliant design The machine comes with 18 EROWA collet holders and 2 EROWA clamp bases for electrode manufacturing, as well as one electrode measurement device and one workpiece measurement device. The machine is equipped with a 20-position tool changer and linear scales on all axes. Approximately 300 liters of dielectric fluid are also included. All factory accessories, machine manual, add-ons, and tool set are included. The machine is almost like new.

Condition: new, Year of construction: 2025, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Ledpohwhfuefx Ahzsrg Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: refurbished (used), Year of construction: 2008, machine/vehicle number: D 2319867, overall weight: 176 kg, total length: 930 mm, total width: 550 mm, total height: 450 mm, volume flow: 129 m³/h, operating pressure: 1,500 bar, power: 6.7 kW (9.11 HP), input frequency: 50 Hz, rotational speed (max.): 1,740 rpm, Dry-running positive displacement pump for low pressure, from Becker, type KDT 3.140/0-400, built in 2008. The rotary vane compressor uses self-lubricating vanes made of a graphite composite material and requires only minimal maintenance and no oil change. For further details see type plates / files. Packaging and loading included. Ledpjtpgxzjfx Ahzerg

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: D 2402263, overall weight: 176 kg, total length: 930 mm, total width: 550 mm, total height: 450 mm, volume flow: 129 m³/h, operating pressure: 1,500 bar, power: 6.7 kW (9.11 HP), input frequency: 50 Hz, rotational speed (max.): 1,740 rpm, Dry-running positive displacement pump for low pressure, from Becker, type KDT 3.140/0-400, built in 2009. The rotary vane compressor uses self-lubricating vanes made of a graphite composite material and requires only minimal maintenance and no oil change. For further details see type plates / files. Lrodpetp Tklofx Ahzog Packaging and loading included.

Condition: excellent (used), Standing desk – lectern – high table and shelf. With slanted shelf in graphite grey: 480×570 cm. Total height: 110 cm Width: 52.5 cm Depth: 52.5 cm Additional shelf (74.5 cm × 74.5 cm). Height can be adjusted freely. 2 levels with short (8 cm high) elements 2 levels, each 23.5 cm high 1 level, 33.5 cm In very good condition, also suitable for use as a shelf. Scope as shown. Shipping possible (also disassembled). Ljdpfsxyirgox Ahzerg

Condition: excellent (used), Standing desk – lectern – high table and shelf. With slanted shelf in graphite grey: 480×570 cm. Lrsdpfx Ahexyiq Ajzog Total height: 110 cm Width: 52.5 cm Depth: 52.5 cm Additional shelf (74.5 cm × 74.5 cm). Height can be adjusted freely. 2 levels with short (8 cm high) elements 2 levels, each 23.5 cm high 1 level, 33.5 cm In very good condition, also suitable for use as a shelf. Scope as shown. Shipping possible (also disassembled).

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, For sale: immediately ready-to-use extraction system. Designed for graphite extraction – was used for copper/graphite parts. Model IF Vario M 1600. Filter element: bag filter F7. Filter element: knitted wire mesh aluminium 90kg/m³. Filter mat M5. Filter element: particulate filter H14. Differential pressure gauge. Comes with frame. Lsdpfxoxry R Rj Ahzjrg

Condition: excellent (used), Year of construction: 2023, S3Y310 BAND FILTER SYSTEM INCLUDING CHIP CONVEYOR BMF-BÜRENER - Coolant tank: 600 litres - Dimensions (LxWxH): 1100x1100x800 mm - Filtration capacity: 150 l/min with emulsion - Average outlet fineness: approx. 60-40 µm - 2x screw spindle pumps MTS20-40 Delivery pressure: 25 bar Flow rate: approx. 24 l/min Power: 3 kW - 2x submersible pumps SPK2-23/15 (rinsing) Delivery pressure: 4.3 bar Flow rate: approx. 35 l/min Power: 0.75 kW Ledpfx Ajxv Dbhshzerg - 1 roll of filter paper - 1 unit hinged belt chip conveyor with pre-filtration, lifting tank and lifting pump (Flow rate approx. 170 l/min) - Coating: Graphite grey RAL7024 Year of manufacture: 2023

Condition: new, Year of construction: 2024, working width: 950 mm min. workpiece height: 4 mm max. workpiece height: 170 mm height adjustment: electrically read out height: digital Ljdsknyhlspfx Ahzerg electronic control: Fox 500 KTR aggregates: 1 1. aggregat: Combination unit for calibrating and sanding / Slant-grooved steel roller Ø 120 mm with height fine adjustment / Hard sanding pad with graphite pad dust brush: no motor power: 7,5 kW suction connection: 140 mm machine length: 1388 mm machine width: 1545 mm machine height: 1668 mm weight: 660 kg

Condition: new, Year of construction: 2023, working width: 1100 mm min. workpiece height: 4 mm max. workpiece height: 170 mm height adjustment: electrically workpiece thickness display: digital aggregates: 2 1. aggregat: angular grooved steel roller Ø 120 mm, fine adjustment for calibration, pneumatic on/off of the roller 2. Aggregat: Combination unit with finely adjustable working height for calibrating and fine grinding: rubber-coated roller Ø 120 mm (45 Sh), hard grinding shoe with graphite coating on replaceable insert and pneumatic on/off of roller Link grinding shoe: elastic, sector distance 56 Electronic control: FOX 500 KTR dust brush: no motor power: 15 kW suction connection: 2 x 140 mm Lrsdeirmg Uepfx Ahzeg machine length: 1650 mm machine width: 1820 mm machine height: 1960 mm weight: 1170 kg

Year of construction: 2001, condition: like new (used), Double-aggregate grinder, two lower aggregates 2 x7.5 kW main power, 4 kW feed, lifting and lowering 2 kW, the machine after renovation, conveyor belt in very good condition. New graphite shoe. The machine has two aggregates from the bottom, contact rollers rubber first shaft second Combi system with graphite runner. Working width 630 mm. Two feed speeds slower faster. Length of grinding belt 1900 mm. Pneumatic oscillation. Tensioning the belts pneumatically. Speed of grinding belt 18 m / s. grinding shoes 1. Declaration of conformity CE power 21 kW nominal whole. Machining height 160 mm. Maszyan has two lower working shafts. Transport tape top system. Lrsdefxpbmspfx Ahzsg

Condition: new, Hoku KS 150 edge sander manufactured by Rehnen. The upper section is made of heavy-duty cast iron with a built-in three-phase motor 380 V, 2.2 kW, 2850 rpm; the machine is equipped with a built-in switch-plug combination; Motor protection switch and main switch in accordance with VDE regulations; Sanding belt back panel dimensions: 850 x 150 mm; steel table height adjustable by spring pressure; belt dimensions: 150 x 2280 mm; The sanding belt back panel is covered with a graphite sliding coating; The machine is supplied with an assortment of sanding belts; A square and miter gauge is also included. The machine is dust-tested (GS) by Holz-BG-Stuttgart when connected to a central extraction system with an air speed of at least 20 m/s. - Swivels 90-180° Lrodpfxowgc D Ss Ahzog - Motorized belt oscillation - Small support table on the idler pulley - Pneumatic belt tensioning Technical specifications: Motor power: 2.2 kW Sanding belt dimensions: 150 x 2280 mm Sanding belt speed: 22 m/s Table size: 750 x 350 mm Space required: 1000 x 800 mm Weight: from 180 kg Extraction diameter: 100 mm

Condition: new, -New-The upper part in heavy cast design withbuilt-in three-phase motor 380 V, 2.2kW,2850 rpm,the machine is equipped with built-inSwitch and plug combination,Motor protection switch and main switch according to VDE,Dimensions of the back wall of the sanding belt: 850 x 150 mm,Steel table adjustable in height by means of spring pressure,Tape measure: 150 x 2280 mm,the back wall of the sanding belt is covered with a graphite sliding coating,the machine is supplied with an assortment of sanding belts,The scope of delivery also includes a bracket andMiter machine is connected to acentral extraction system with one air speedDust-tested at least 20 m / s (GS) hnical specifications:Motor power: 2.2 kWSanding belt size: 150 x 2280 mmSanding belt speed: 22 m / le size: 750 x 350 mmRequired space: 1000 x 800 mmWeight: from 180 kgExtraction D .: 100 mmItem No. 1050-500000Incl.:- swiveling 90-180 °Item No. 1050-590010- Belt oscillation item no. 1050-590020- Support table on the pulleyItem No. 1050-590040- pneumatic belt tensionItem No. 1050-590155 Ledpfx Aevwf Ivshzorg

Condition: new, maximum load weight: 31,480 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 35 m³, Equipment: ABS, New vehicle - Available immediately! For sale, lease, or lease with option to purchase upon request! GRW - VAN HOOL 35m³ Horizontal Cement Silo - NEW----* Manufacturer: GRW / VAN HOOL * Type: Cement Silo * First registered: - (New vehicle) * Color: Chassis RAL 7024 Graphite Gray, Container RAL 9001 Cream White * Volume: 35m³ / 1 Chamber * Gross vehicle weight: 36,000 kg * Unladen weight according to manufacturer: 4,520 kg * Payload: 31,480 kg * Axles: 3x SAF axles / disc brakes * Tires: 385/65 R22.5 NEW / Alcoa aluminum rims * Suspension: Air suspension * ABS / EBS * 2 bar pressure tank * Operating temperature from -40°C to +80°C * 1 chamber * 2 dome covers Lodpfxewaqhle Ahzorg * 4" pinch valves * 4" central outlet to the rear * 1x DN65 aluminum pipe (painted) runs on the right side from the main air supply to the distributor * 1x DN65 upper air hose line * 2x hose pipe boxes left and right (5m) * Fluidization mats * 1,185mm fifth wheel height * Aluminum chassis * Aluminum walkway with access to the rear left * Single fender * Full load supports * Toolbox * Aluminum air tank * Loading pressure gauge * LED work lights * LED reversing lights * Reverse alarm New vehicle - Available immediately! For sale, rent, or lease with option to purchase upon request! Note regarding possible errors in the advertisement: Despite careful preparation of the advertisement, occasional errors may have crept into the text or information. We assume no liability for errors, changes, or prior sales. All information is provided without guarantee. Please contact us to verify details or clarify any further questions.

Condition: new, Bernardo edge sanding machine KSM 3000 C with veneer sanding device Technical specifications working table 960 x 350 mm table height adjustment 210 mm belt length 3000 mm belt width 150 mm sanding belt back 1060 x 200 mm sanding unit swivelling 90° - 45° belt speed 20 m/sec. additional table 330 x 330 mm Oscillation stroke 20 mm Oscillation motor 0,25 kW (0,34 PS) suction connection Ø 120 mm Motor output power S1 100% 3,0 kW (4,0 PS) Motor input power S6 40% 4,5 kW (6,0 PS) Voltage 400 V Machine dimensions (W x D x H) 1910 x 840 x 1020 mm Weight approx. 330 kg Scope of delivery Sanding belt 3000 x 150 mm - K100 Sanding belt oscillation Veneer sanding device additional table Graphite coating Mitre fence Sanding shoe Suction hose Features Lrjdpfx Ahjd N Tdmszsg - Heavy machine stand in torsion- and vibration-free construction, extremely stable - Grooved infeed fence, ideal for sanding veneer overhangs - Suction connection 80 / 100 mm on both sides for optimum chip removal - Oscillating sanding belt ensures high stock removal and a clean sanding pattern - Maintenance-free sanding belt oscillation with separate gear motor, optionally switchable - Height-adjustable sanding table for utilisation of the entire sanding belt - Standard veneer edge sanding device with fine adjustment - Quick changeover from veneer to solid wood sanding possible - Height adjustment of the working table or swivelling of the sanding unit via handwheels - spring

Condition: new, Bernardo Belt Grinding Machine KBR 100 x 2000 Duo belt dimension 100 x 2000 mm belt speed 15 / 30 m/sec. min./max. pipe diameter 20 - 76 mm slide adjustment 30° - 90 surface grinding table 400 x 100 mm contact wheel Ø x W 195 x 100 mm suction connection Ø 2 x 100 mm Speed 1410 / 2850 rpm Motor output power S1 100% 2.2 / 2.8 kW (400 V) Motor input power S6 40% 3.0 / 4.0 kW (400 V) Machine dimensions (W x D x H) 750 x 1450 x 1160 mm Weight approx. 158 kg Features Constant belt tension due to spring-loaded tensioning device Standard with cylindrical grinding device for pipes diam. 20 - 76 mm Quick and easy adjustment of the desired grinding angle Graphite coating on the face grinding surface increases the sliding properties of the grinding belt Large dimensioned plane grinding surface with protective cover Slow belt speed (15 m/sec.) optimal for grinding of stainless steel and aluminium User-friendly belt change, fast and uncomplicated Quick and easy change of grinding rollers without tools Different grinding angles from 30° to 90° possible without any problems Shorter processing times compared to milling Scope of delivery Sanding belt K 36 Rubberized sanding roller 1 pc. sanding roller for 3/4" tube (26/28 mm tube) 2 pcs. Hinged protective discs Cylindrical grinding device Grinding and support table 2 x dust extraction nozzles diam. 100 mm 2 pcs. chip collecting container Graphite coating Lrodpfod Id Ubex Ahzeg Motor protection switch

Condition: new, Year of construction: 2025, New machine Year of manufacture 2025 Edge sanding machine with integrated dual conveyor feed system for solid wood parts, veneered edges, and curves, featuring oscillation of the entire sanding unit. Processing of solid and veneered edges either manually or with automatic feeding: - On the veneer sanding side, along the two stop plates (with infeed stop including integrated extraction slots and fine adjustment according to removal scale) onto the elastic sanding pad (oscillating for uniform use of the graphite lining, including grit compensation adjustment and belt tension relief via two deflection rollers), with infeed stop extension, table size 1180 x 325 mm. Manual processing of straight and curved solid wood parts: - On the solid wood sanding side against the continuous, glide-backed sanding belt support, table size 1180 x 325 mm including miter fence with scale. Lrjdpfxsw Tfx De Ahzjg - On the front side with an optionally quick-mountable semicircular table (with dust extraction holes) against the rubberized belt drive roller Ø 90 mm, support radius 300 mm. - On the drive roller, optionally with a quickly mountable auxiliary cast iron table (with dust extraction holes) 400 x 500 mm on an oscillating spindle for use of sanding drums Ø 25, 30, 40 and 45 x 100 mm for external and internal curves, with spindle safety cover. Design: Robust machine frame with heavy cast iron tables, sanding unit motorized height adjustment up to 120 mm and tiltable up to 45° without any table adjustments (patented construction), belt drive motor 3 kW (4 HP), 400 V/50 Hz, with motor protection switch, separate motor for belt oscillation, oscillation stroke programmable from 10 - 90 mm, control box integrated in frame, constant belt tension with length compensation, belt tracking adjustable, safety guard, dust extraction via two extraction hoods, flexible hoses and common internal pipe to 150 mm connection, recess in frame for easy transport with pallet or forklift, belt width 150 - 200 mm, belt length 2000 mm, working height 830 mm (solid sanding table) or 900 mm (veneer sanding table), net weight 750 kg, footprint 1150 x 800 mm. Feed system: Integrated in the frame, two parallel transport belts 50 mm wide, spaced 250 mm apart on the underside, 20 mm wide top pressure rollers, 0.55 kW (0.75 HP) motor, continuously adjustable speed 3 - 15 m/min. COMFORT version Kündig UNIQ-S Including table extension UNIQ/UNIQ-S/Flash Including upper extraction duct UNIQ without slide Including semicircular table for belt drive roller UNIQ-S Availability: short-term Location: Flörsheim

Year of construction: 1997, condition: used, Usable space (height/width/depth): 800mm x 1200mm x 1200mm Maximum batch weight: 1000 kg Maximum furnace temperature: 1350°C, temperature uniformity: ±5 K Control: Stange SE-502 Ledpfx Ahowp R Anjzerg Heating: Electric Heating element material: Graphite Heating element design: Graphite rods Total heating power: 190 kW Number of control zones: 2 Additional option: Convective heating Cooling gas / gas pressure cooling: Nitrogen N² 5.0 / 1.49 bar Cooling direction: 2 RK (vertical in alternation) Vacuum system make: Leybold Operational vacuum: 5 x 10-2 mbar (fine vacuum)

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. Equipment and technical specifications: The Master brings grinding to the point. It embodies the essence of our 75 years of experience in grinding technology. This means that it combines all the features essential for the fast, reliable production of perfect surfaces right out of the box. Nothing more, nothing less. The core model, the Kündig Master, is equipped with a calibration roller and a sanding pad unit and features a proven design that guarantees decades of high sanding precision – and all this across the generous working width of 1350 mm. A control unit is also on board, which quickly and easily achieves the desired result. The Sanding Units – Proven Combination The sanding units rely on the proven combination of calibration roller and sanding pad. For secure workpiece guidance, a parallel spring-loaded steel pressure roller is located at the machine inlet, and rubber pressure rollers are located between the sanding units. Calibration Unit (R): The calibration unit is a grooved rubber contact roller of proven hardness. It is ideally suited for calibration tasks, even with high chip removal rates if necessary. The level of the contact roller is continuously adjustable to compensate for the thickness of the abrasive grain. Segmented sanding pad (E): With the E-Plus configuration, the fine sanding unit features a segmented, electronically controlled sanding pad with a scanning width of 35 mm instead of the pneumatic version. This allows for even more precise fine sanding in the edge area of the workpieces. The edge pressure of the sanding segments is automatically controlled, but can also be precisely adjusted on the touchscreen to more precisely influence the sanding around the workpiece edges. Changing the graphite sliding coating is also quick and easy. The features - In a nutshell Construction: In terms of robustness and durability, the Master is in no way inferior to our other model series. It features the same solid construction that makes all our machines a forward-looking investment and is designed to deliver precise sanding results even after many years. Top adjustment: For over three decades, we have equipped our machines exclusively with top adjustment. Why? While more complex in design than table adjustment, it is also superior in many respects. The machine can handle heavier workpieces, maintains its precision more reliably, and offers the advantage of a constant working height. Workpiece dimensions: The upper section, i.e., the through-hole, is motorized and can be finely adjusted via a touchscreen. The maximum through-hole height is 160 mm. With a working width of 1350 mm, the Kündig Master offers a generous, tried-and-tested standard size. Lsdow Naanopfx Ahzerg