Used Graphite for sale (188)

Condition: reconditioned (used), Year of construction: 2023, All wear parts new only 704 operating hours Special price for a low-hour demonstration unit Base machine: €29,990 net Optional extras (for an additional charge): - Cooling unit: €3,995 net - Emulsion tray: €3,990 net Gbedpfod N Dnhsx Adbji The hydraulic briquetting presses of the MPP NEM series compact materials such as aluminum, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are distinguished by their robust construction, ensuring consistent briquette quality during continuous operation. The pressing process does not require any binding agents – compaction is achieved solely through hydraulic pressing force. Depending on material, the feedstock volume can be reduced by up to 90%. Throughput capacity: maximum 70 kg/h (depending on material) Briquette diameter: Ø 50 mm Motor: 5.5 kW 400 Volt / 50 Hz / 3-phase Pump: 40 liters Maximum briquette length: 50 mm Optimal briquette length: 40 mm Silo diameter: 1,000 mm Oil tank: 110 liters Dimensions: 1750 x 1130 x 1100 mm (L x W x H) Weight: 950 kg Hydraulic pre-compaction via slide Main press cylinder Vertical cylinder Fill level sensor: yes Feed material requirements: - Max. chip length: 15 mm - Installation room temperature: heated space, at least +5°C - Max. load on agitator: 150 kg - Feed material must be free from magnetic metals and mineral contaminants such as sand, stones, etc. Damage to pressing tools and/or increased wear may otherwise occur.

Condition: excellent (used), Band sawmill consisting of: - Tension carriage EWD EW 1000 - Band saw EWD EBB 1400 - Roller conveyor for transporting the sawn goods (manufacturer SPRINGER) - Raised cabin - Tracks - Control cabinets - Accessories Optionally with complete sharpening room equipment: - Sharpening machine Vollmer CAL 200 - Upsetting machine Vollmer PMH - Flanking (leveling) machine Vollmer EMS Log band saw EWD Esterer EBB1400 Vertical band saw for round wood Roll diameter: 1400 mm Roll width: 200 mm Saw blade width: 206 mm Saw blade thickness max. 1.47 mm Blade speed max. 55 m/s (winter & summer drive pulley available) Main motor: 55 kW The roller crowning was reground in 2009 Band saw carriage EWD Esterer EW1000 hydraulic tensioning carriage Year of manufacture 1991 4 tensioning blocks with 3 log turners tensioning block opening max. 1000 mm hook opening max. 930 mm total length: 6000 mm total width: 2450 mm total height: 1750 mm track width 1300 mm The band sawmill was bought second-hand in 2004/2005, reinstalled by Esterer, but never put into full operation as cutting is almost exclusively done with the gang saw. The band saw has only run for 500 operating hours since 2004! very good condition - available immediately - can be demonstrated by appointment Gbjdpfsvtwzmsx Adbsi Sharpening room equipment: 01. Vollmer CAL 200 sharpening machine Year of manufacture 2000 Tooth feed from the left CNC machine for grinding cutting and block band saw blades with straight grinding and wet grinding Full enclosure with extraction for CBN and corundum grinding wheels Incl. 2 Borazon grinding wheels 10mm 02. Vollmer PMH upsetting machine Saw upsetting machine for band saw blades Max. blade thickness 3.5 mm 03. Vollmer EMS flank/leveling machine Leveling machine for upset band saw blades converted to self-drive in combination with CAL 200 incl. limit switch on the saw clamping! Further details: The sharpening machines were purchased second-hand in 2007 and stored covered on pallets or wooden structures in a dry, heated garage. Because the band saw was never put into full operation, the sharpening room equipment was repeatedly postponed, so that today the machines are in the same condition as when they were delivered. All operating instructions, descriptions and circuit diagrams are neatly enclosed in a box. In 2018 and 2023 the machines were cleaned of surface dust outside, lightly oiled with graphite spray and stored in the garage again! immediately available - fully functional - very good condition Location: Austria, near St. Pölten

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, AGIETRON Hyperspark 2 HS Year of manufacture: 2006 Travel paths: X = 350 mm, Y = 250 mm, Z = 350 mm Max. workpiece dimensions (L x W x H): 650 x 580 x 250 mm or 820 x 420 x 250 mm Max. workpiece weight: 400 kg Distance from table to quill: 170–520 mm Quill with automatic chuck of your choice (Erowa / 3R Systems) Without electrode changer – robot available on request Work tank is lowerable for optimal accessibility Incl. C-axis for rotation, indexing, and EDM (U = 0–60 rpm) AGIE IPG high-performance generator with 72 A Material removal rate copper/steel: 450 mm³/min Material removal rate graphite/steel: 530 mm³/min Gbodpfx Aoxt H Ncodbsi Best achievable surface finish Ra 0.2 µm Net machine weight: 3,200 kg Machine dimensions (L x W x H): 2,689 x 1,855 x 2,593 mm The machine is in stock with us and has already been cleaned, serviced, and tested. We are happy to perform an individual test for you as well. Including 6-month warranty on spare parts We can also offer you on-site commissioning and operator training. Optional: Transport, chiller, oil, clamping devices

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 800 kg, total height: 2,965 mm, total width: 2,135 mm, total length: 2,855 mm, quill stroke: 500 mm, workpiece length (max.): 880 mm, workpiece width (max.): 680 mm, workpiece height (max.): 350 mm, overall weight: 3,900 kg, Sinker EDM Machine AGIE Impact 3 Year of manufacture: 2003 Travel paths (X/Y/Z): 500 x 350 x 500 mm Max. workpiece dimensions: 1070 x 530 x 350 mm or 880 x 680 x 350 mm Max. workpiece weight: 800 kg Internal dimensions of work tank: 1090 x 730 x 490 mm Programmable fluid level: 0-390 mm Including C-axis with 0-60 RPM Max. electrode weight on C-axis: 50 kg Without electrode changer Average discharge current: 72 Amps Material removal rate copper-steel: 450 mm³/min Material removal rate graphite-steel: 530 mm³/min Machine dimensions: 2855 x 2135 x 2965 mm Machine weight: 3900 kg The machine is in stock, has been cleaned, overhauled and tested. We are happy to perform a custom test for you and advise you regarding your application. We also offer commissioning and warranty upon request. Gbodpfoxt H Irjx Adboi

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. Equipment and technical specifications: The Master brings grinding to the point. It embodies the essence of our 75 years of experience in grinding technology. This means that it combines all the features essential for the fast, reliable production of perfect surfaces right out of the box. Nothing more, nothing less. The core model, the Kündig Master, is equipped with a calibration roller and a sanding pad unit and features a proven design that guarantees decades of high sanding precision – and all this across the generous working width of 1350 mm. A control unit is also on board, which quickly and easily achieves the desired result. The Sanding Units – Proven Combination The sanding units rely on the proven combination of calibration roller and sanding pad. For secure workpiece guidance, a parallel spring-loaded steel pressure roller is located at the machine inlet, and rubber pressure rollers are located between the sanding units. Calibration Unit (R): The calibration unit is a grooved rubber contact roller of proven hardness. It is ideally suited for calibration tasks, even with high chip removal rates if necessary. The level of the contact roller is continuously adjustable to compensate for the thickness of the abrasive grain. Segmented sanding pad (E): With the E-Plus configuration, the fine sanding unit features a segmented, electronically controlled sanding pad with a scanning width of 35 mm instead of the pneumatic version. This allows for even more precise fine sanding in the edge area of the workpieces. The edge pressure of the sanding segments is automatically controlled, but can also be precisely adjusted on the touchscreen to more precisely influence the sanding around the workpiece edges. Changing the graphite sliding coating is also quick and easy. The features - In a nutshell Gedpfsw Naanex Adbebi Construction: In terms of robustness and durability, the Master is in no way inferior to our other model series. It features the same solid construction that makes all our machines a forward-looking investment and is designed to deliver precise sanding results even after many years. Top adjustment: For over three decades, we have equipped our machines exclusively with top adjustment. Why? While more complex in design than table adjustment, it is also superior in many respects. The machine can handle heavier workpieces, maintains its precision more reliably, and offers the advantage of a constant working height. Workpiece dimensions: The upper section, i.e., the through-hole, is motorized and can be finely adjusted via a touchscreen. The maximum through-hole height is 160 mm. With a working width of 1350 mm, the Kündig Master offers a generous, tried-and-tested standard size.

Condition: new, Year of construction: 2025, New machine Year of manufacture 2025 Edge sanding machine with integrated dual conveyor feed system for solid wood parts, veneered edges, and curves, featuring oscillation of the entire sanding unit. Processing of solid and veneered edges either manually or with automatic feeding: - On the veneer sanding side, along the two stop plates (with infeed stop including integrated extraction slots and fine adjustment according to removal scale) onto the elastic sanding pad (oscillating for uniform use of the graphite lining, including grit compensation adjustment and belt tension relief via two deflection rollers), with infeed stop extension, table size 1180 x 325 mm. Manual processing of straight and curved solid wood parts: Gbjdpfxew Tfx Dj Adbji - On the solid wood sanding side against the continuous, glide-backed sanding belt support, table size 1180 x 325 mm including miter fence with scale. - On the front side with an optionally quick-mountable semicircular table (with dust extraction holes) against the rubberized belt drive roller Ø 90 mm, support radius 300 mm. - On the drive roller, optionally with a quickly mountable auxiliary cast iron table (with dust extraction holes) 400 x 500 mm on an oscillating spindle for use of sanding drums Ø 25, 30, 40 and 45 x 100 mm for external and internal curves, with spindle safety cover. Design: Robust machine frame with heavy cast iron tables, sanding unit motorized height adjustment up to 120 mm and tiltable up to 45° without any table adjustments (patented construction), belt drive motor 3 kW (4 HP), 400 V/50 Hz, with motor protection switch, separate motor for belt oscillation, oscillation stroke programmable from 10 - 90 mm, control box integrated in frame, constant belt tension with length compensation, belt tracking adjustable, safety guard, dust extraction via two extraction hoods, flexible hoses and common internal pipe to 150 mm connection, recess in frame for easy transport with pallet or forklift, belt width 150 - 200 mm, belt length 2000 mm, working height 830 mm (solid sanding table) or 900 mm (veneer sanding table), net weight 750 kg, footprint 1150 x 800 mm. Feed system: Integrated in the frame, two parallel transport belts 50 mm wide, spaced 250 mm apart on the underside, 20 mm wide top pressure rollers, 0.55 kW (0.75 HP) motor, continuously adjustable speed 3 - 15 m/min. COMFORT version Kündig UNIQ-S Including table extension UNIQ/UNIQ-S/Flash Including upper extraction duct UNIQ without slide Including semicircular table for belt drive roller UNIQ-S Availability: short-term Location: Flörsheim

Condition: new, Year of construction: 2022, Exhibition machine Year of manufacture: 12/2022 Features and technical data: DESCRIPTION • Grinding unit tiltable by hand crank • The machine frame made of welded steel ensures high torsional rigidity and vibration-free operation • Oscillating sanding belt with a separate geared motor for improved sanding results Godew I Uvzepfx Adbjbi • Oscillation can be switched on or off as needed • Sanding platen with graphite coating for longer belt life • Height-adjustable sanding table to utilize the entire belt width • Auxiliary table for sanding radii with integrated extraction ports • Sleeve sanding device with attachable work table • Spring-loaded belt tension automatically compensates for belt length differences • Equipped with adjustable stops, ideal for veneer sanding • Veneer overhang can be sanded off effortlessly TECHNICAL DATA Dimensions and weights Product length approx. 1700 mm Product width/depth approx. 1000 mm Product height approx. 1150 mm Net weight approx. 300 kg Drive power Oscillation motor power: 0.11 kW Extraction connection Extraction port diameter: 2 x 100 mm Work tables Table length: 950 mm Table width: 450 mm Table height adjustment: 110 mm Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Grinding unit Sanding belt length: 2640 mm Sanding belt width: 150 mm Belt speed: 14 m/s Oscillation stroke: 15 mm Sanding area length: 800 mm Sanding area width: 150 mm Tilt range of grinding unit: 0–45° SCOPE OF DELIVERY • 1x sanding belt K100 • 5x rubber rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm • 6x sanding sleeves K80 – Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm • Standard tool kit • Mitre gauge Location: Hochheim Availability: Immediately

Condition: new, maximum load weight: 33,570 kg, overall weight: 39,500 kg, axle configuration: 3 axles, loading space length: 12,450 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, DOLL 3-axle semi-trailer LOGO 12 * Front wall made of fine-grain steel sheet, designed in accordance with DIN EN 12642 Code L * Welded steel chequered plate cover * 3 single axles, SAF brand, 9 t Intradisc CD disc brakes * 1st axle as lift axle * Air suspension with lifting and lowering via rotary slide valve * Manually operated landing gear * 8 x DOLL Mammut bunks and stakes * 385/65 R 22.5 tyres on steel rims * LED tail lights with integrated triangular reflectors * 4x LED work lights (1,800 lumens) * RAL 9011 graphite black (frame + bunks), RAL 3002 carmine red (stakes) * COC document Various bolt-on accessories such as toolbox, additional support leg, and access ladder are available at extra cost. Further information available upon request. Illustrations may differ from the original. Information provided without liability. Godpsx Egtljfx Adbobi Contact: Niclas Lott Tel.:

Condition: refurbished (used), Year of construction: 2008, machine/vehicle number: D 2319867, overall weight: 176 kg, total length: 930 mm, total width: 550 mm, total height: 450 mm, volume flow: 129 m³/h, operating pressure: 1,500 bar, power: 6.7 kW (9.11 HP), input frequency: 50 Hz, rotational speed (max.): 1,740 rpm, Dry-running positive displacement pump for low pressure, from Becker, type KDT 3.140/0-400, built in 2008. The rotary vane compressor uses self-lubricating vanes made of a graphite composite material and requires only minimal maintenance and no oil change. For further details see type plates / files. Gbjdpfxjtpgxzs Adbji Packaging and loading included.

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: D 2402263, overall weight: 176 kg, total length: 930 mm, total width: 550 mm, total height: 450 mm, volume flow: 129 m³/h, operating pressure: 1,500 bar, power: 6.7 kW (9.11 HP), input frequency: 50 Hz, rotational speed (max.): 1,740 rpm, Dry-running positive displacement pump for low pressure, from Becker, type KDT 3.140/0-400, built in 2009. The rotary vane compressor uses self-lubricating vanes made of a graphite composite material and requires only minimal maintenance and no oil change. For further details see type plates / files. Packaging and loading included. Gjdpfetp Tklsx Adbsbi

Condition: new, Year of construction: 2025, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. Gbsdjh S H R Sepfx Adbsi With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2025, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. Gbodpohv U Tqefx Adbei With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, mileage: 500 km, power: 70 kW (95.17 HP), fuel type: electric, overall weight: 4,250 kg, color: white, number of seats: 3, total length: 6,040 mm, total width: 2,200 mm, total height: 2,780 mm, loading space volume: 15 m³, loading space length: 3,400 mm, loading space width: 2,080 mm, loading space height: 1,570 mm, Year of construction: 2023, * CityRollup superstructure Gsdpfsqz R Dmjx Adbebi * All-aluminum body with Segemental roller doors * 2 compartments à 2,057 mm + 2 compartments à 1,320 mm * Dekra certified according to VDI 2700 ff and DIN EN 12642 XL * Range approx. 200 km * Lithium iron phosphate battery * Battery capacity 80 kWh 400 V * Leaf spring ORTEN Electric-Trucks E 35 with roller shutter body: Pricing taking into account the subsidies Technical data chassis: Manufacturer: ORTEN Vehicle class: N2 GVW: 4,250 kg (driving license class B) Unladen weight: 2,295 kg Wheelbase: 3,745 mm Tires: 185/75 R 16C Equipment: Seats 1+2 * Gear ratio rear axle i = 4.1 * Stabilizer rear axle * Front disc brakes * Rear drum brakes * Airbag driver * Fog lights * Heat-insulating glass * Luxury driver's seat * Central locking * Electrically adjustable exterior mirrors * Storage compartments left and right front doors * Multimedia 2DIN with USB connection * Hands-free system * ABS * Summer tires * Spare wheel, supplied loose * Wheel chock with bracket (vehicle class N2) * Cab color similar to signal white RAL 9003 * Chassis color graphite black * Wheel rims color silver * Warning triangle * First aid kit * Hazard warning lights * Operating instructions Technical data of the conversion: * Maximum speed: 85km/h * Range: approx. 200km * Battery: Lithium iron phosphate (LFP) Nickel and cobalt free * Battery capacity: 80kWh, 400V / DC * Charging plug: Type 2 Mode 3 / AC / IEC 62196 * Charging time: approx. 3.5 hours at 400 Volt / 22kW AC * Electric motor: Synchronous electric motor, water-cooled * Motor power: 70kW / Peak 92 kW * Torque: 410Nm / Peak 730Nm Technical equipment: Regenerative braking power * 22kW On Board Charger AC * DC/DC on-board power converter * Electric power steering assistance * BMS- CAN-BUS-controlled charging technology * Electric 5kW HV cab heater * Color display, shows all relevant battery, BMS, engine and control data * Diagnostic menu for engine control and BMS integrated in the information display * Diagnostic menu for battery cell monitoring integrated in the information display * Stainless steel construction elements * HV 400 Volt / DC battery heating system (only in charging mode) * Vehicle approval § 13 EG-FGV / ECE R100 ORTEN City Rollup body Assembly dimensions: Total length: approx. 3,600 mm Floor inclination: 0 mm Total height: approx. 2,360 mm Width of the bay: front 2057 / rear 1320 mm Total width: approx. 2,200 mm Height of the bay: 1575 mm Aluminum roller doors: Roll-up with spring support. Rubber band for pulling down the roller doors. In the closed position, the doors are secured centrally by a locking handle, which is mounted on both sides of the front wall and can be locked with a padlock. Pallet stop: Pallet stop approx. 20 mm on the outer edge of each bay, welded to prevent goods from sliding against the door Underride guard: Original chassis underride guard is used Rear wall: Fixed rear wall. Double-walled with aluminum planking with smooth surface. Paintwork: Body painted on the outside in RAL ? color. Lettering can be applied as specified at an extra charge Side steps: The side underride guard is formed by steps with an anti-slip surface for the driver. Steps along the bodywork on both sides of the vehicle, between the axles and behind the rear

Condition: new, driver cabin: other, gearing type: other, Vehicle location: in transit / arriving soon, Superstructure: Self-priming water pump, self-lubricating, equipped with a separate engine. Dirty water pump with KD350 C5 engine, air-cooled, max. delivery rate 1,800 liters/min (108 m³/h), pump head 17 m, protection class IP 23, self-priming. Impeller made of graphite cast iron, volute made of graphite, mechanical seal made of silicon carbide. Centrifugal pump designed for dewatering and drainage, suitable for handling highly contaminated media with particle sizes up to 20 mm. Standard equipment includes strainer, screw fittings, clamps, operation and maintenance manual. Weight: 90 kg. Technical data: - Max. delivery rate: 1,800 l/min (108 m³/h) Gbodpfx Adji Rqr Tjboi - Max. suction head (m): 8 - Inlet diameter (mm): 100 - Outlet diameter (mm): 100 - Particle size (mm): 20 - Self-priming: yes - Approx. weight (kg): 90 - Dimensions (L x W x H in mm): 715 x 570 x 590 - Engine type: 1-cylinder, 4-stroke, side valve - Engine: KOHLER KD350 C5 - Autonomy (h): 4.3 - Fuel: Diesel - Tank capacity (liters): 4.3 - Starting system: Recoil starter Price depends on size! Suitable water tanks: see-6112-, -6113- ACCESSORY DETAILS WITHOUT WARRANTY. Subject to change, prior sale, and errors excepted!

Condition: new, Hoku KS 150 edge sander manufactured by Rehnen. The upper section is made of heavy-duty cast iron with a built-in three-phase motor 380 V, 2.2 kW, 2850 rpm; the machine is equipped with a built-in switch-plug combination; Motor protection switch and main switch in accordance with VDE regulations; Sanding belt back panel dimensions: 850 x 150 mm; steel table height adjustable by spring pressure; belt dimensions: 150 x 2280 mm; The sanding belt back panel is covered with a graphite sliding coating; The machine is supplied with an assortment of sanding belts; A square and miter gauge is also included. The machine is dust-tested (GS) by Holz-BG-Stuttgart when connected to a central extraction system with an air speed of at least 20 m/s. - Swivels 90-180° - Motorized belt oscillation Gedpfjwgc D Sox Adbsbi - Small support table on the idler pulley - Pneumatic belt tensioning Technical specifications: Motor power: 2.2 kW Sanding belt dimensions: 150 x 2280 mm Sanding belt speed: 22 m/s Table size: 750 x 350 mm Space required: 1000 x 800 mm Weight: from 180 kg Extraction diameter: 100 mm

Condition: new, Year of construction: 2024, working width: 950 mm min. workpiece height: 4 mm max. workpiece height: 170 mm height adjustment: electrically read out height: digital electronic control: Fox 500 KTR aggregates: 1 1. aggregat: Combination unit for calibrating and sanding / Slant-grooved steel roller Ø 120 mm with height fine adjustment / Hard sanding pad with graphite pad dust brush: no motor power: 7,5 kW suction connection: 140 mm machine length: 1388 mm machine width: 1545 mm Gedpfxjknyhls Adbsbi machine height: 1668 mm weight: 660 kg

Condition: new, Year of construction: 2023, working width: 1100 mm min. workpiece height: 4 mm max. workpiece height: 170 mm height adjustment: electrically workpiece thickness display: digital aggregates: 2 1. aggregat: angular grooved steel roller Ø 120 mm, fine adjustment for calibration, pneumatic on/off of the roller 2. Aggregat: Combination unit with finely adjustable working height for calibrating and fine grinding: rubber-coated roller Ø 120 mm (45 Sh), hard grinding shoe with graphite coating on replaceable insert and pneumatic on/off of roller Link grinding shoe: elastic, sector distance 56 Electronic control: FOX 500 KTR dust brush: no motor power: 15 kW suction connection: 2 x 140 mm machine length: 1650 mm machine width: 1820 mm Gjdpfxjirmg Uo Adbebi machine height: 1960 mm weight: 1170 kg

Condition: new, Year of construction: 2024, functionality: fully functional, turning diameter: 51 mm, The machine is a new storage machine. STANDARD EQUIPMENT main spindle 15KW, 4.000 rpm with Mitsubishi M830 control with 4 cross slides on the main spindle with an 8-fold servo turret VDI30x55 all stations can be used for red. WZG central milling drive 3.3 KW, 3000 rpm incl. stable polygon turning function (without tool holder) with full C-axis on the left spindle and on the pick-up spindle with 48-position spindle lock for support during routing Including pick-up spindle with workpiece collecting tray and finished part conveyor belt for falling cut-off parts or remnants With swiveling finished part conveyor belt for Gbedpfsug Up Nex Adboi finished part unloading after rear side processing 4 tool holders for rear side with programmable KM high pressure for clamping device cleaning before the next workpiece transfer with HD-KM pumps, 70 bar with separate coolant tank (180 liters) with handwheel Coolant and hydraulic pumps Bar feeder interface Interface for Lico chip conveyor 1 set of slide base holders Automatic lubrication system Cutting force monitoring at all stations Control cabinet with air conditioning unit 3-fold signal lamp The machine is also equipped with a turret for back machining. This is only designed for fixed tools. BASIC MACHINE EQUIPMENT LICO / FMB bar loader interface Programming pad for Lico machines Color Door RAL 7015 slate gray Chip tray/frame RAL 7024 graphite gray Housing RAL 7035 light gray

Condition: new, overall weight: 18,000 kg, axle configuration: 2 axles, total width: 2,530 mm, Year of construction: 2025, Equipment: ABS, 2-axle self-steering trailer type M2K-9L * KOMPAKT steering system * Corrosion resistance through powder coating * All attachments can be screwed on * Conventional wiring * Brackets and attachments in stainless steel or galvanized * 2 single axles, BPW, 10 t with disc brakes, including safety cables. * Air suspension * Aluminum air reservoir * Stool model IX, with 1x mechanically telescopic stanchions * Tires 275/70 R 22.5 on steel rims * EBS brake system * LED tail lights with integrated triangular reflector * 4x LED work lights (1,800 lumen) * Manual central lubrication * Paint finish: RAL 9011 graphite black * Payload approx. 14,550 kg 2-axle self-steering trailer type M2K-10B * Differences to the M2K-9L: * Leaf suspension * 2 single axles, make BPW, 12 t with drum brakes, including safety ropes * Stool model IX, with 1x hydraulically telescopic stanchions * 315/80 R 22.5 tires on steel rims * Electric central lubrication * Payload approx. 14,100 kg 2-axle self-steering trailer type M2K-10L * Differences to the M2K-9L: * 2 single axles, BPW make, 12 t with drum brakes, including safety ropes * Stool model IX, with 1x hydraulically telescopic stanchions * 315/80 R 22.5 tires on steel rims * Electric central lubrication * Payload approx. 14,100 kg 2-axle self-steering trailer type M2R-10L Differences to M2K-9L: * ratio steering system (4-cylinder) * 2 single axles, BPW, 12 t with drum brakes, including safety ropes * Stool model IX, with 1x hydraulically telescopic stanchions * 315/80 R 22.5 tires on steel rims * Electric central lubrication * Payload approx. 13,965 kg Various additional equipment available. Further information on request. Illustrations may differ from the original. Information without guarantee. Contact Gsdpfxsgqc Hbo Adbebi Niclas Lott Tel:

Condition: new, maximum load weight: 16,400 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 3,500 mm, total width: 2,550 mm, total height: 955 mm, Year of construction: 2025, Equipment: ABS, rapid+ 2-axle center-axle trailer A2T-LZ35 ALPHA * Only 2,600 kg unladen weight * Air suspension * 2 single axles, SAF brand, 9 t with disc brakes, including safety cables * 265/70 R 19.5 tires on high-gloss aluminum rims * Aluminum air reservoirs Gbedpfx Aohnaknedbei * EBS braking system * Full LED lighting * 4x LED work lights (1,800 lumens) * 2x grab ropes * Paint finish: frame/stool color graphite black * Drawbar with Ø 50 mm towing eye * Side impact protection according to ECE R 73 * For transporting 1 x 3 m / 1 x 4 m / 1 x 5 m of timber * 2x ExTe D10 stools + conical stanchions Ex works in Mildenau. Subject to change and prior sale. Further information available upon request. Information provided without guarantee. Images may differ from the original. Contact: Niclas Lott Tel.:

Condition: new, maximum load weight: 15,000 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 5,900 mm, total width: 2,550 mm, total height: 1,081 mm, Year of construction: 2025, Equipment: ABS, rapid+ 2-axle short timber trailer A2K-LE59-L-ALPHA * Only 3,000 kg tare weight * Air suspension * 2 single axles, make SAF, 9 t with disc brakes, including safety ropes * Tyres: 4x 385/55 R 22.5 on high-gloss aluminum rims * Aluminum air reservoir * EBS brake system * Full LED lighting * 4x LED work lights (1,800 lumen) * 1x grapple cable * Paint finish: frame/frame color graphite black * Drawbar type GNZ 27, drawbar eye Ø 40 mm + footprint on drawbar * Side collision protection according to ECE?R 73 * for transporting 2 x 3m / 1 x 4m / 1 x 5m / 1 x 6m timber * 4x ExTe D7 stools, ExTe D7 EURO-C stanchions Gbjdpfx Adsh Hclvjbsi DOLL lightweight construction: This DOLL 2-axle trailer stands for modern vehicle construction and efficient timber transportation. The trailer offers the proven DOLL quality - practical and safe. Plus TÜV approval. Ex works Mildenau. All prices plus registration and statutory VAT. Subject to alterations and prior sale. Further information on request. Specifications without guarantee. Illustrations may differ from the original. Contact Niclas Lott Tel:

Condition: new, maximum load weight: 30,400 kg, overall weight: 38,000 kg, axle configuration: 2 axles, loading space length: 15,215 mm, total width: 2,550 mm, total height: 1,640 mm, Year of construction: 2025, Equipment: ABS, 2-axle semi-trailer LOGO 21 * Air suspension * 2 single axles, make BPW, 12 t with drum brakes * Manual mechanical support * 8 x DOLL Mammut bolsters and stanchions * Tires 315/80 on steel rims * EBS-E brake system * LED tail lights with integrated triangular reflector * 4x LED work lights (1,800 lumens) * BEKA-MAX central lubrication pump * 2x snow chain holder * RAL 9011 graphite black (frame + bolster), RAL 3002 carmine red (stanchions) * side impact protection in accordance with ECE?R 73 * All attachments in accordance with EC regulations Various additional equipment available. Further information on request. Images may differ from the original. Information without guarantee. Contact: Niclas Lott Tel.: Gjdpfx Aegqc Hfjdbebi

Condition: new, maximum load weight: 14,800 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 5,900 mm, total width: 2,550 mm, total height: 955 mm, Year of construction: 2025, Equipment: ABS, rapid+ 2-axle short log trailer A2K-LZ59-L-ALPHA * Only 3,200 kg unladen weight * Air suspension * 2 single axles, SAF, 10 t with disc brakes, including safety cables * Tires: 265/70 R 19.5 on Alcoa (Dura-Bright) aluminum rims * Aluminum air reservoir * EBS braking system * Full LED lighting * 4x LED work lights (1,800 lumens) * 1x grab rope * Paint finish: Frame/seat color graphite black Gbodpfx Ash Hclrodbji * Drawbar type GNZ 27, towing eye Ø 40 mm + standing area on drawbar * Side impact protection according to ECE R 73 * For transporting 2 x 3m / 1 x 4m / 1 x 5m / 1 x 6m of logs * 2x ExTe D7 + 2x ExTe D10 bolsters & stakes DOLL lightweight construction: This DOLL 2-axle trailer represents modern vehicle construction and efficient timber transport. The trailer offers proven DOLL quality – practical and safe. Excluding TÜV approval. Ex works Mildenau. All prices subject to change and prior sale. Further information available upon request. Information without guarantee. Images may differ from the original. Contact: Niclas Lott Tel.:

Condition: new, maximum load weight: 35,585 kg, overall weight: 42,000 kg, axle configuration: 3 axles, loading space length: 12,950 mm, loading space height: 1,347 mm, total width: 2,550 mm, Year of construction: 2025, Equipment: ABS, LOGO 14XL 3-axle semi-trailer especially for OFF- and ON-ROAD USE! * Electronic air suspension * 3 single axles, make SAF, 9 tons with disc brakes * 1st axle liftable, 3rd axle self-steering * Radio control for operating the frame lock and brake * Manual mechanical support * Stools: 8x ExTe D7 (item 1 with double pockets, item 2 movable and with flat stake pockets as well as with quick-release wedge system) * Stanchions: 14x ExTe D7 telescopic stanchions, 2x ExTe D10 telescopic stanchions * Tires: 385/65 R 22.5 on steel rims * EBS brake system * LED tail lights with integrated triangular reflector * 4x LED work lights (1,800 lumen) * Aluminum air tank * 1x grab rope * 1x maneuvering coupling * Frame + stool in RAL 9011 graphite black * All attachments in accordance with EC regulations Various additional equipment available. Further information on request. Illustrations may differ from the original. Information without guarantee. Contact Gbsdpfxogqc Eao Adbji Niclas Lott Tel:

Condition: new, maximum load weight: 35,700 kg, overall weight: 42,000 kg, axle configuration: 3 axles, loading space length: 10,735 mm, total width: 2,550 mm, Year of construction: 2025, Equipment: ABS, 3-axle semi-trailer LOGO 14X especially for OFF- and ON-ROAD USE! * Electronic air suspension * 3 single axles, make SAF, 9 t with disc brakes * 1st axle can be lifted, 3rd axle is self-steering * Radio control for operating the frame lock and the brake * Manual mechanical support * Stool: 8x ExTe D7 (item 1 with double pockets, item 2 can be moved and with flat stake pockets and with quick-release wedge system) * Stake: 14x ExTe D7 telescopic stakes, 2x ExTe D10 telescopic stakes * Tires: 385/65 R 22.5 on steel rims * EBS brake system * LED tail lights with integrated triangular reflector * 4x LED work lights (1,800 lumens) * Air tank made of aluminum * 1x grapple rope * 1x shunting coupling * Frame + stool ExTe D7 in RAL 9011 Graphite black Gedpfx Adshnak Ijbjbi * All attachments comply with EC regulations Various additional equipment available. More information on request. Images may differ from the original. Information without guarantee. Contact: Niclas Lott Tel.: