Used Graphite for sale (193)

Condition: excellent (used), Year of construction: 2020, Compact wide-belt sanding machine with combination sanding unit With special offer equipment – Top condition – Special offer equipment: - Switching the sanding shoe on and off from the control panel - Switching the roller on and off from the control panel - Electronic control Fox 500 KTR - Table extension with 2 rollers for infeed and outfeed - Automatic table positioning with button control Article number: 5222100A2 Also suitable for smaller workshops for occasional use Combination sanding unit with sanding shoe for fine sanding Standard with diagonal-grooved steel roller Ø 120 mm for calibration Fine adjustment of working height Clear control panel on the front side Robust tube-reinforced monoblock steel machine body, robot-welded, with work units positioned high up for maximum rigidity Motorized table height adjustment with digital display Electronically controlled sanding belt oscillation Feed carpet driven by gear motor with two speeds Natural rubber feed belt with negative profile Flexible steel pressure rail in front of the first unit Rubber pressure rollers before and after each working unit Pneumatic belt tensioning per unit with decimal correction possible for grit/belt thickness Universally applicable for solid wood and veneer thanks to the combination unit Entry-level model for smaller companies Working width 950 mm Equipment details Combination unit for calibration and sanding Diagonal-grooved steel roller Ø 120 mm with fine height adjustment Hard sanding shoe with graphite pad Universal version for calibration and sanding of solid wood, chipboard, and veneer Lrjdpfxexac E Hj Ahzjg Technical data Length (product) approx. 1388 mm Height (product) approx. 1668 mm Width/depth (product) approx. 1545 mm Connection for extraction Extraction port diameter 140 mm Electrical data Connection voltage 400V Current type AC Phases 3Ph Line frequency 50Hz Feed motor power 0.33 / 0.55 kW Table height adjustment motor power 0.25 kW Drive motor power 7.5 kW Sanding unit Sanding belt length 1525 mm Max. sanding width 950 mm Sanding belt width 970 mm Feed unit Feed speed 4.5 / 9 m/min Workpiece Min. workpiece height 4 mm Max. workpiece height 170 mm Location: ex stock 54634 Bitburg - Immediately available -

Condition: new, Year of construction: 2026, Robust design also allows the machining of longer workpieces Sanding unit swivels, therefore also usable as edge sanding machine 225 mm large balanced belt rollers ensure low-vibration drive. Easy adjustment of the grinding belt High belt speed of 17 m/s Right-left rotation Upper grinding sole with graphite coating grinding shoe 4-fold spring mounted With movable grinding shoe for bevelled surfaces Smooth-running grinding table even with high loads from heavy workpieces Optimal price-performance ratio Additional equipment ESE Electrical table height adjustment as standard Divided table to fold up for special edge grinding Drawer sanding device Integrated worktable lighting Equipment details 225 mm large balanced belt rollers ensure optimum and low-vibration drive belt speed 17 m/s With swivel-mounted professional sanding shoe for bevelled surfaces 4-fold spring suspension Electrical table height adjustment as standard Operating elements ergonomically arranged on separate control panel With drawer sanding device as standard Divided table to fold up for special edge grinding applications Dimensions and weights Length approx. 3750 mm width/depth approx. 1250 mm Height approx. 1730 mm Weight approx. 520 kg Dust extraction connection Suction nozzle diameter 160 / 160 mm Work table(s) Work table height adjustment 550 mm Work table transverse stroke 690 mm Lrjdpfx Aheff Hdfozog Electrical data Power Höh

Condition: new, Year of construction: 2024, Holzkraft edge sanding machine Type: KSO 200 F with veneer sanding device Sanding unit can be swivelled up to 45° by means of a lever Machine stand made of welded steel guarantees high torsional stiffness and vibration-free operation. Oscillating sanding belt with separate gear motor for better sanding results Oscillation optionally switchable Sanding soleplate with graphite coating for a longer service life of the sanding belt Height-adjustable sanding table for utilization of the entire sanding belt width Height-adjustable additional table with suction for grinding radii Spring-loaded belt tension automatically compensates for belt length differences. With double suction Extendable roller table extension With rubberized sanding roller Veneer edge sanding device with contact shoe with fine adjustment, relief rollers and stop rulers With grooved infeed ruler for veneer overhangs Quick changeover from veneer edge sanding to solid wood sanding possible Dimensions and weights Length approx. 1900 mm Width/depth approx. 900 mm Height approx. 1350 mm Weight approx. 290 kg Connection dust extraction suction nozzle diameter 140 / 100 mm Drive power oscillation motor 0,25 kW Working table(s) working table length 960 mm working table width 350 mm Working table height adjustment 230 mm Height min. 735 mm Height max. 965 mm Height adjustment longitudinal table 230 mm Cross table length 330 mm Cross table width 330 mm Cross table height min. 720 mm Cross table height max. 900 mm Cross table height adjustment 180 mm Electrical data Lrsdpolht H Njfx Ahzjg Power drive motor 3,0 kW Supply voltage 400 V Grinding unit grinding belt length 3000 mm grinding belt width 200 mm Belt speed(s) 20 m/s Grinding surface length 1050 mm grinding surface width 200 mm Oscillation stroke 20 mm Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Quick belt tension via lever Upper belt support with graphite coating 250 mm large balanced belt rollers ensure optimum drive. With electrical height adjustment With suction and noise protection devices With noise protection certificate With two speeds Adapts to surfaces due to swivel-mounted grinding shoe Angled surfaces Clockwise and anti-clockwise rotation as standard Lsdpfxoff Hdbs Ahzjrg The quick belt tensioning system allows quick and easy changing of the abrasive belts. delivery is carried out partly assembled Dimensions and weights Length approx. 4540 mm width/depth approx. 1510 mm Height approx. 1510 mm Weight approx. 475 kg Dust extraction connection Suction nozzle diameter 2 x 140 mm Work table(s) Work table height adjustment 620 mm max. working width on table 900 mm Electrical data Power of height adjustment motor 0,37 kW Power of suction motor 0,75 kW Drive motor power 3.3 / 4.5 kW Supply voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Sanding unit grinding belt length 8100 mm Sanding belt width 150 mm Belt speed(s) 9 / 18 m/s grinding shoe length 360 mm grinding shoe width 150 mm Workpiece Height max. 590 mm height max. workpiece longer than work table 180 mm Explanation of height max. workpiece longer than work table Machining of the workpiece with overhang right over the work table possible

Condition: as good as new (ex-display), Year of construction: 2026, Compact wide belt sander with combined sanding unit Lredpfx Asgf Sw Njhzjg Action equipment: - Switching the sanding shoe on and off from the control panel - Switching the roller on and off from the control panel - Electronic control Fox 500 KTR - Table extension with 2 rollers with infeed and outfeed - Automatic table positioning with push button Item number: 5222100A2 Also for smaller craft workshops for occasional use Combination sanding unit with sanding shoe for fine sanding As standard with angular grooved steel roller Ø 120 mm for calibrating Fine adjustment of the working height Clearly arranged control panel on the front side Robust tube-stiffened monoblock steel machine body, robot-welded, working units mounted high up for maximum rigidity Motorized height adjustment of the work table with digital display Electronically controlled sanding belt oscillation Carpet feed via gear motor with two speeds Natural rubber feed carpet with negative profile Flexible steel pressure rail in front of the first unit Rubber pressure rollers, in front of or behind each working unit Pneumatic belt tensioning for each unit with decimal correction option for grain size / belt thickness Universal use for solid wood and veneer thanks to combination unit Entry model for smaller companies Working width 950 mm Equipment details Combination unit for calibrating and grinding Angled steel roller Ø 120 mm with fine height adjustment Hard grinding shoe with graphite support Universal design for calibrating

Condition: new, mileage: 99 km, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: black, gearing type: automatic, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Equipment: GRAPHITE BLACK * Climate Package * Air-suspended cab * XG+ cab * Main mirrors * Headlight beam for right-hand traffic * Headlights without height adjustment * Reversing camera * Chrome trim/insert in cab, side windows: blackout * LED headlights, cornering and fog lights * LED daytime running lights * Fixed cab access * Front chassis configuration: floor plate * Composite glass with sun protection film * Central locking, 3 keys, 2 remote controls * Windshield with sun protection film * External sun visor * Two LED lights for cab rear panel * 2 beacons * Signal horns, 1 set * LED skylights, additional LED lights cab roof, pre-installed * DAF Corner View * High beam assistant * Extended side fenders * Side panels * Adjustable roof spoiler for XG+ cab * Chassis color black Ledpoxgacvefx Ahzsrg * GRAPHITE BLACK * Left-hand drive * Leather steering wheel, Exclusive * Black seat belts * Electrically operated roof hatch * Preparation for pneumatic device * Driver’s seat, fixed base * Cab, interior trim: Argenta * Passenger seat, fixed base * Xtra Comfort mattress + reinforced lower bunk * Upper bunk * Automatic cab climate control * Safety nets on both bunks * Armrests on both sides of the driver's seat * Armrests on both sides of the passenger seat * Storage compartment with drawer in center console * Dashboard type: Plateau * Auxiliary heater with heat recovery pump and timer * Electric window lifters * Pollen filter * Interior trim color: Exclusive * Cab wall trim textile * Dashboard table * Integrated stationary air conditioning * Driver’s seat: Xtra Leather Air * Passenger seat: cinema and table function, leather upholstery * Door panels: leather * Curtains with partition curtain * Refrigerator and drawer * Auxiliary power supply: standard + 2x 40A * LED interior lighting: Exclusive * ECAS remote control with extended functions * Wireless charger * Adaptive cruise control with FCW and AEBS-3 * Toll preparation * DAF Connect * FMS interface, prepared * Driver Performance Assistant * Digital tachograph, VDO 1C, version G2V2 * Speed limiter setting: 90 km/h * DAF Infotainment Luxury Plus, Exclusive speakers * Antennas: DAB radio prep., 2x mobile, GNSS extra: CB * Hill start assist * DAF Side and Turn Assist * Electronic Stability Control (ESC) * Speed limit recognition * DAF Drowsiness Detection * Standard immobilizer * Alcohol interlock, prepared * Lane change warning system * Airbag (driver) and 2 seat belt pretensioners * Reversing warning system * Stabilink rear axle suspension * One ride height position, standard height * Front axle 1, 8,000 kg, load index 156 * Rear axle 1, 12,600 kg, load index 148 * Rear axle capacity 13.00 t * Rear axle load monitoring * Front air suspension: standard * Front: 8.00 t, air suspension, 161 N * Rear: air suspension SR1347 * Goodyear * Tire pressure monitoring system * Driven rear axle(s): 315/70 R22.5 * Front axle(s): 385/55R22.5 * Aluminum wheels Alcoa Dura-Bright 32 mm * F1, 385/55R22.5 GO KMAXS2 160/000 K Steering BBA * R1, 315/70R22.5 GO KMAXD2 154/150 L Traction CBA * Standard transport, full version * Maneuvering mode * Automated gearbox, TraXon, 12 speeds * Automated transmission with manual override – full version * Traction control (ASR) * Emission standard Euro 6 * ECO performance * Rear axle ratio 2.53 * Mechanical differential lock * 12-speed TraXon gearbox 12TX2620 DD, 16.69–1.00 * MX-13 engine,

Condition: used, Opal Type: Opal 460 Opal 460 from ATM The Opal 460 is a fully hydraulic, water-cooled hot mounting press for mounting micrograph samples. The process sequence is carried out automatically. The fully automatic sliding shutter enables trouble-free opening and closing of the mounting area. and closing of the embedding area. Manufacturer ATM Q Ness GmbH Model OPAL 460 Functional principle: Lsdpfx Aovd Dlgjhzsrg The Opal 460 is a fully hydraulic, water-cooled hot mounting press for mounting micrograph specimens. During hot mounting, the specimen is embedded in a mounting press under temperature and pressure with a plastic granulate. The advantages of the process are the high hardness of the embedding material (e.g. glass fiber reinforced) and the good freedom from splitting. Hot embedding agents are available based on epoxy resin, acrylic resin, phenolic resin and graphite resin. Main area of application: Mounting of samples for better sample preparation for further metallographic examinations. Technical data: Press mold Ø 30 mm, Ø 50 mm Temperature range 20 ... 200 °C Max. Pressure 310 bar Weight ~ 40 kg Condition: used Scope of delivery: (see picture) (We reserve the right to make changes and errors in the technical data) We will be happy to answer any further questions you may have on the phone.

Condition: new, -Continuously adjustable sanding unit (0 - 90°) for vertical and horizontal sanding -Oscillating sanding belt for better sanding results and a longer service life of the sanding belt -Quick and easy sanding belt change via quick-clamping system -Grinding sole with graphite coating as standard for a longer service life of the sanding belt -Work table made of gray cast iron adjustable via handwheel with T-slot -Including side sanding sleeve device for sanding curves and radii -Two suction nozzles Ø 100 mm -1x sanding belt 2750x 150mm grain 80 -1x sanding sleeve Ø38mm grain 80 -1x sanding sleeve Ø50mm grain 80 -1x sanding sleeve Ø75mm grain 80 Dimensions and weights: - Length (product) approx.: 1515 mm Lrodpfx Asvxkv Ujhzjg - Width/depth (product) approx.: 550 mm - Height (product) approx.: 1150 mm - Weight (net) approx.: 207 kg Extraction connection: - Extraction nozzle diameter: 100 mm Work table(s): - Work table length: 900 mm - Work table width: 305 mm - Work table height adjustment: 120 mm Electrical data: - Connection voltage: 400 V - Mains frequency: 50 Hz Grinding unit: - Sanding belt length: 2750 mm - Sanding belt width: 150 mm - Belt rotation speed(s): 16 m/s - Oscillation stroke: 15 mm - Sanding surface length: 1010 mm - Sanding surface width: 190 mm - Sanding height max.: 170 mm - Sanding unit swivel: 0 – 90 ° Workpiece: - Workpiece width max.: 1010 mm - Workpiece height max.: 150 mm - new exhibition machine -

Condition: used, Year of construction: 2009, Dimensions (L/W/H) mm Filter capacity 14 m² Number of filters St. Dimensions (L/W/H) mm engine output 5,5 kW 0 2.800 m³/h low pressure 5.000 Pa suitable for dust removal from graphite and metals electromotive filter cleaning including mechanical filter unit ME-FI 2000 Manufacturer W+W Filtersysteme Lredpfju Sbkaox Ahzjg The suction fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum.

Condition: used, Year of construction: 2017, overall weight: 512 kg, total width: 1,400 mm, total length: 1,400 mm, total height: 2,660 mm, type of input current: three-phase, negative pressure: 4,600 Pa, filter area: 14 m², suction capacity: 2,655 m³/h, Dust extraction unit, RINGLER/Karcher Group brand, self-cleaning vacuum filter, extractor and dedusting system designed for efficient extraction of graphite, metallic, mineral dusts, hard fibers, flammable, hazardous, toxic substances, and for process dust collection during sandblasting, soda blasting, grinding, polishing, and all types of dry dust. The vacuum fan is positioned after the filter on the clean air side, minimizing the risk of explosion. Brand: Ringler / Karcher Group Model: RE201 D5.5 IE3 Pocket filter cartridge – multi-pocket Fan power: 5.5 kW Capacity: 2655 m3/h Vacuum: 4600 Pa Filter surface: 14 m2 Lrodpfx Aoxn Rgushzog Inlet diameter: 180 mm / 125 mm Electromotorized filter cleaning Device in very good condition. Warehouse No.: 1051

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, overall weight: 100 kg, space requirement height: 1,025 mm, space requirement length: 955 mm, space requirement width: 530 mm, extraction nozzle diameter: 100 mm, grinding width: 150 mm, grinding belt speed: 30,000 mm/s, grinding belt length: 2,000 mm, power: 3.3 kW (4.49 HP), grinding belt width: 150 mm, Good day, We are pleased to offer you, subject to prior sale, a used belt grinding machine, model MBSM 150-203-2, manufactured by Stürmer Maschinen GmbH. Manufacturer: Stürmer Maschinen GmbH, Germany Model: MBSM 150-203-2 Year of manufacture: 05/2024 Abrasive belt length: 2000 mm Abrasive belt width: 150 mm Belt speed: 30 / 15 m/s Graphite platen length: 495 mm Graphite platen width: 150 mm Motor power: 2.5 / 3.3 kW Extraction nozzle diameter: 2 x 100 mm Power supply: 400 V / 50 Hz Sound pressure level: 87 dB (A) Required floor space: 955 x 530 x 1025 mm (L x W x H) Weight: approx. 100 kg Key features as per the manufacturer: - The machine can be operated at two belt speeds: 30 m/s and 15 m/s. - A continuous surface grinding area, enabled by removable attachments, allows for the processing of long workpieces. - An integrated quick-release system ensures rapid belt changes. - Simple belt tracking adjustment via a setscrew on the front contact roller. - Automatic belt tensioning through a spring-loaded tensioning system. - Infinitely adjustable tilt of the grinding unit. - Separate extraction nozzles on both the spark box and the rear belt roller. Lodpox N Ugqefx Ahzorg Note: The above technical specifications are taken from the operating manual, manufacturer’s brochures, or other sources. We assume no liability for the accuracy or completeness of the information provided. Scope of delivery: 1 used belt grinding machine, type MBSM 150-203-2 by Stürmer Maschinen GmbH Application and condition: The machine was only occasionally used in a maintenance workshop for grinding surfaces, edges, and rounding off during repair work or the fabrication of spare parts for our own machinery. It is in almost as-new condition. The machine is fully functional, in excellent condition, and can be inspected under power at our workshop. We would be pleased if this machine is of interest to you. Your service team, Mertens & Frowein GmbH

Condition: excellent (used), IAG High-Performance Separator Lodsxr A Uxopfx Ahzjrg Model: MF500 Year: 2019 Capacity: 600 l/h Voltage: 400V Suitable for coolant lubricants, cleaning solutions, aqueous solutions The mobile MF separator is used wherever micro-contaminants and tramp oil need to be removed from aqueous fluids. Even when the contaminants are smaller than the actual components of the fluid, the MF separator reliably removes them without the slightest impairment of the original liquid. Example in cast machining: Removal of graphite from water-mixed coolant lubricant. In such cases, the contaminant is up to ten times smaller than the actual emulsion oil droplets. A particular advantage: In every application, the liquid is thoroughly aerated. The mobile MF separator can be used to service multiple machines and tanks one after the other. The MF separator can operate unattended day and night, as it is equipped with self-monitoring capabilities.

Condition: used, Used machine Year of manufacture: 2022 Equipment and technical specifications: - Working width: 950 mm - Also suitable for smaller craft businesses for occasional use - Combination sanding unit with sanding pad for fine sanding - Standard with diagonally grooved steel roller, Ø 120 mm, for calibration - Fine adjustment of working height - Clearly arranged control panel at the front - Robust monoblock steel machine frame with reinforced tubes, robot-welded, with high-mounted working units for maximum rigidity - Motorized table height adjustment with digital display - Electronically controlled sanding belt oscillation - Conveyor belt feed via gear motor with two speeds - Natural rubber feed belt with negative profile - Flexible steel pressure bar in front of the first unit - Rubber pressure rollers before and after each working unit - Pneumatic belt tensioning for each unit, with decimal correction option for grit/thickness - Versatile use for solid wood and veneer, thanks to the combination unit - Entry-level model for smaller companies - Combination unit for calibration and sanding: - Diagonally grooved steel roller, Ø 120 mm, with fine height adjustment - Hard sanding pad with graphite backing - Universal version for calibration and sanding of solid wood, chipboard and veneer - Sanding pad on/off from the control panel - Roller on/off from the control panel - Electronic control system "FOX 500 KTR" - Table extension with 2 rollers at infeed and outfeed - Automatic table positioning with push button Ljdox Hbr Iepfx Ahzorg - Sanding belt length: 1525 mm - Sanding belt width: 970 mm - Maximum working width: 950 mm - Feed speed: 4.5 / 9 m/min - Workpiece height: 4 - 170 mm - Motor: 7.5 kW - Extraction port: 140 mm Dimensions: 1388 x 1545 x 1668 mm Availability: approx. end of January 2026 Location: North Rhine-Westphalia

Condition: used, mileage: 35,272 km, power: 235 kW (319.51 HP), first registration: 11/2024, fuel type: diesel, empty load weight: 7,295 kg, maximum load weight: 10,705 kg, overall weight: 18,000 kg, tire size: 295/80R22,5, axle configuration: 4x2, wheelbase: 4,185 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 3, total length: 7,070 mm, Year of construction: 2024, construction height: 3,090 mm, Equipment: ABS, additional headlights, air conditioning, central locking, cruise control, differential lock, immobilizer system, onboard computer, soot filter, traction control, trailer coupling, Euro Cargo ML180E32 4x2 GSR Hooklift Tipper 235 kW/320 HP – Available Immediately! - Hydraulic connection for tipper trailer - Rear air suspension - Wheelbase: 4185mm - Differential lock - Steel bumper - Rear underride guard - CAN bus interface open for body control - Trailer version - Headlight protective grilles - Sun visor - Window in cab rear wall - 24V 15-pin trailer socket - Air conditioning - Electrically adjustable/heated mirrors - 40mm D100kn tow jaw coupling - Right driver's seat armrest - Rear crossmember D100kn - 360ccm air compressor - 4-way adjustable comfort driver's seat - AHK brand coupling Rockinger - Tyres 295/80R22.5 M+S - Iveco radio DAB + CD Bluetooth - 200L plastic fuel tank - Cab colour: RAL 6005 green, white, or RAL of choice! - Maul coupling Rockinger, trailer load 20,000kg - Ball head coupling 3,500kg 24V12V converter optional, €2,000 plus VAT - Yellow revolving beacons optional Hooklift system 14t mounted on Iveco 18t chassis - Lifting and tipping capacity: 14,000kg - Dual speed (fast gear) - Hook height 1,570mm according to DIN 30722-1 - Compatible container lengths: 4.0m-5.5m Ledpfx Ahjx N Upfjzerg - Telescopic arm - Optional with tele / articulated arm! Container lengths 3.5m-5.5m (low loading angle) - Mechanical hook safety device - Hydraulic internal locking system - Remote control by cable - Additional control on the device - Emergency stop function - Hydraulic pump & 100L hydraulic tank - Paint: black RAL 9011 graphite black, rollers RAL 9011 graphite black - Toolbox - CE certificate - Suitable hooklift containers available optionally Errors and prior sale subject to change. ... Air conditioning, VAT deductible, ASR, ABS, sunroof, multifunction steering wheel, radio, onboard computer, cruise control, front + rear electric windows, electronic immobilizer, central locking with remote control, trailer coupling, power steering, rev counter, differential lock, external temperature display, tinted windows, tachograph, cab: short haul, air-sprung driver’s seat, electric windows, auxiliary headlights, tipping hydraulics, one owner, emissions class: Euro 6, diesel, rear-wheel drive, excellent condition, HSN 4192, particulate filter, general inspection (TÜV) and emissions test renewed before sale, fine dust sticker: 4 - green, tyre pressure monitoring.

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Lrjdpfxeuhiq Ds Ahzjg MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). These enquiries will not be answered. Features and technical data: • Robust, space-saving 2-belt wide belt sander for demanding pre- and finish sanding • Constant working height thanks to adjustable top section • Working width: 1,350 mm • Overhead sanding, with 2 sanding units • 1st unit equipped with a grooved rubber contact roller of proven hardness • Pneumatically (program controlled) adjustable contact roller; contact roller height continuously adjustable according to a sanding grit scale • 2nd unit equipped with an electronically controlled, segmented sanding pad (segment width 35 mm) and quick-change graphite wear strip • Parallel spring-mounted, ground steel pressure roller at the infeed • Rubber-coated pressure rollers between sanding units and at the outfeed • Motor: 15 kW (20 HP), 400 V/50 Hz, with soft start for reduced current draw during startup • Motorized, fine-adjustable height adjustment with digital display • Belt tensioning, tracking, and oscillation are pneumatically controlled, compressed air consumption approx. 4 l/min • Optimal safety thanks to automatic emergency stop with disc brake in case of belt breakage • Workpiece feed: 0.75 kW (1.0 HP) with fabric-reinforced rubber conveyor belt • Fully integrated electrical system with contactor control; automatic star-delta start for the main motor, motor protection, and ammeter for monitoring material removal • Maximum passage height: 200 mm • Sanding belt dimensions: 1,350 x 2,000 mm Comfort features: • Automatic thickness adjustment across the entire working width • Workpiece overthickness protection with immediate feed stop and automatic lift of the machine top section • Continuous adjustment of material removal • Electronic feed rate control at the operator panel, stepless from 3 to 15 m/min • PLC control/programming with color touch-screen and TEACH-IN memory function (store parameters at the push of a button based on sanding results, i.e., no manual data entry required) • Pneumatic conveyor belt tracking control • Workpiece support rollers at infeed and outfeed • Enormatic: Fully automatic quick setup and feed solution • eco*-Energy saving mode • Error diagnosis • Job and operating hour counters • Machine in E-Plus version (RE) Including outfeed table extension, 1,350 mm, foldable, without insert plate Location: Solingen Availability: short-term

Condition: new, maximum load weight: 15,240 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 5,250 mm, total width: 2,550 mm, Year of construction: 2024, Equipment: ABS, rapid+ 2-axle center-axle trailer A2T-LE53 ALPHA * Only 2,760 kg unladen weight * Air suspension * 2 single axles, SAF, 9 t with disc brakes, including safety cables * 4 x 385/55 R 22.5 tires on Alcoa DuraBright aluminum rims * Aluminum air reservoirs * EBS braking system * Full LED lighting * 4 x LED work lights (1,800 lumens) * 2 x grab ropes * Paint finish: frame/stool color graphite black * Side impact protection according to ECE R 73 * For transporting 2 x 2 m / 2 x 3 m / 1 x 4 m / 1 x 5 m / 1 x 6 m of timber * 4 x ExTe D5 stools (2 x clamp attachments, 2 x roller attachments) + Tapered stanchions Ex works in Mildenau. Subject to change and prior sale. Further information available upon request. Information provided without guarantee. Lrjdev Ruyujpfx Ahzjg Images may differ from the original. Contact: Niclas Lott Tel.:

Condition: new, functionality: fully functional, working width: 1,100 mm, grinding width: 1,100 mm, grinding height: 170 mm, power: 15 kW (20.39 HP), height adjustment type: electric, grinding belt length: 1,900 mm, grinding belt width: 115 mm, CASADEI LIBRA 35/2 RTC 110 Standard Equipment Two-belt version with 1100 mm sanding width for the cost-conscious tradesman. The LIBRA 35 calibration and fine grinding machine is an extremely versatile and versatile machine. Robust tubular-reinforced monoblock steel machine body with high-mounted working units for maximum rigidity. User-friendly thanks to the clearly laid-out control panel on the front. Motorized table height adjustment. Digital display for the working height. Electronically controlled sanding belt oscillation with reduced compressed air consumption. 1st unit: 120 mm diameter, slanted steel roller with fine adjustment for calibration. Pneumatic on/off of the roller. 2nd unit: Combination unit with finely adjustable working height for calibration and fine grinding: 120 mm diameter rubber-coated roller (45 Sh), hard sanding pad with graphite coating on a replaceable insert. Pneumatic roller on/off Electronic sanding pad, 56-sector spacing Electronic control system FOX 500 KTR Electronic working thickness adjustment Automatic carpet centering ✔ Automatic star-delta start-up for main motor Natural rubber feed carpet with negative profile Support table with two rollers at the inlet and outlet of the feed carpet Carpet feed via gear motor with two speeds Flexible steel pressure rail in front of the first unit Rubber pressure rollers in front of and behind each working unit Pneumatic belt tensioning for each unit with decimal adjustment of grit/belt thickness Length approx. 1650 mm Width/Depth approx. 1820 mm Height approx. 1960 mm Extraction connection Number of extraction nozzles: 2 Extraction nozzle diameter: 140 mm Electrical data Height adjustment motor power: 0.25 kW Feed motor power 0.33/0.55 kW Drive motor power 15 kW Connection voltage 400 V Line frequency 50 Hz Grinding unit Lodpfx Ajwa Dbxohzerg Grinding belt length 1900 mm Grinding belt width 1115 mm Maximum sanding width 1100 mm Feed unit Feed speed 4.5 / 9 m/min Workpiece Min. height 4 mm Max. height 170 mm #### For many years, we have maintained a partnership-based sales concept with specialist dealers, which is why orders are processed through a recommended partner coordinated with you.#####

Condition: new, functionality: fully functional, table length: 950 mm, table width: 450 mm, input voltage: 400 V, oscillation stroke: 15 mm, grinding belt length: 2,640 mm, grinding belt width: 150 mm, power: 2.2 kW (2.99 HP), grinding belt speed: 14 mm/s, input frequency: 50 Hz, Sanding unit can be pivoted using a hand crank. The welded steel machine stand guarantees high torsional rigidity and vibration-free operation. Oscillating sanding belt with separate gear motor for better sanding results. Oscillation can be optionally activated. Sanding base with graphite coating for a longer sanding belt service life. Height-adjustable sanding table utilizes the entire sanding belt width. Additional table with extraction openings for sanding radii on the rubberized guide roller. Sanding sleeve device with attachable work table. The spring-loaded belt tension automatically compensates for belt length differences. With adjustable stops, it is ideal for veneer sanding. Dimensions and Weights Length (product) approx. 1700 mm Width/Depth (product) approx. 1000 mm Height (product) approx. 1150 mm Net Weight approx. 300 kg Extraction Connection Ledjwg Ddajpfx Ahzsrg Number of Extraction Outlets 2 Extraction nozzle diameter 100mm Worktable(s) Worktable length 950mm Worktable width 450mm Worktable height adjustment 110mm Electrical Data Supply voltage 400V Mains frequency 50Hz Oscillation motor power 0.11kW Sanding unit: Sanding belt length 2640mm Sanding belt width 150mm Belt speed(s) 14m/s Oscillation stroke 15mm Sanding surface length 800mm Sanding surface width 150mm Sanding unit tilt 0-45° If you have any questions, please contact us! Are you looking for a specialist dealer near you? We supply specialist machine dealers throughout Germany, in European and non-European countries with metalworking machines, compressed air technology, woodworking machines, welding technology, as well as cleaning and workshop technology. Contact us and we will tell you the nearest dealer.

Condition: new, total length: 1,700 mm, total width: 1,000 mm, total height: 1,500 mm, table length: 900 mm, table width: 360 mm, input voltage: 400 V, grinding belt length: 2,580 mm, grinding belt width: 150 mm, power: 2.2 kW (2.99 HP), grinding belt speed: 14 mm/s, input frequency: 50 Hz, • Sanding unit can be swiveled using a handwheel • The welded steel machine base guarantees high torsional rigidity and vibration-free operation • Oscillating sanding belt with separate gear motor for better sanding results • Oscillation can be optionally activated • Sanding sole with graphite coating for a longer sanding belt service life • Height-adjustable sanding table utilizes the entire sanding belt width Ledpfx Aswg Dy Iohzorg • Additional table with extraction openings for sanding radii on the rubberized guide roller • Sanding sleeve device with attachable work table • The spring-loaded belt tension automatically compensates for belt length differences Technical specifications: Dimensions and weights - Length (product) approx. 1700 mm - Width/depth (product) approx. 1000 mm - Height (product) approx. 1150 mm - Weight (net) approx. 250 kg Extraction connection: - Number of extraction nozzles: 2 - Extractor nozzle diameter 100mm Worktable: - Worktable length 900mm - Worktable width 360mm - Worktable height adjustment 110mm Electrical data: - Supply voltage 400V - Mains frequency 50Hz - Oscillation motor power - Sanding unit power 0.11kW - Sanding belt length 2580mm - Sanding belt width 150mm - Belt rotation speed(s) 14m/s - Oscillation stroke 15mm - Sanding surface length 800mm - Sanding surface width 150mm - Sanding height max. 150mm - Sanding unit pivoting 0 – 90° Scope of delivery • 1x Sanding belt K100 • 5x Rubber rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm • 6x Sanding sleeves K80 - Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm • Onboard tool kit • Miter gauge If you have any questions, please contact us! Are you looking for a specialist dealer near you? We supply machine dealers throughout Germany, in European and non-European countries with metalworking machines, compressed air technology, woodworking machines, welding technology, as well as cleaning and workshop equipment. Contact us and we will tell you the nearest dealer.

Condition: good (used), functionality: fully functional, mileage: 125,753 km, power: 140 kW (190.35 HP), fuel type: diesel, gearing type: automatic, wheelbase: 3,200 mm, overall weight: 3,100 kg, first registration: 10/2021, next inspection (TÜV): 09/2026, emission class: euro6, color: grey, number of seats: 8, number of previous owners: 1, Year of construction: 2021, Equipment: ABS, additional headlights, air conditioning, airbag, all-season tires, car registration, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, parking heater, parking sensors, power assisted steering, seat heater, sliding door, soot filter, 7831 Paint color: Graphite Grey metallic dark MB 7831 BA3 Active Brake Assist BH1 Hold Function CF7 Comfort Suspension CL3 Leather Steering Wheel CL4 Multifunction Steering Wheel with Trip Computer CM2 Bumpers and Attachments Painted in Body Color CN1 Exterior Sill Panels CU4 Aerodynamics Package D12 Roof Railing/Luggage Rack E07 Hill-start Assist E1D Digital Radio (DAB) E57 Trailer Socket Wiring EA4 Audio 40 EL9 2-way Speakers Front and Rear ES2 12V Socket in Luggage Compartment/Cargo Area ET4 Active Distance Assist DISTRONIC EY2 Pre-installation for Live Traffic Information JK3 Instrument Cluster with Pixel Matrix Display JP1 PRE-SAFE® JP4 Lane Package JW5 Lane Keeping Assist JW8 Attention Assist JX2 Service Interval 40,000 km KB5 Main Fuel Tank 70 Liters KP7 SCR Emission Control Generation 4 L Left-Hand Drive LA2 Light Assist LC4 Comfort Roof Control Unit LC8 Surround Lighting Tailgate LD9 Rear Compartment Interior Lights LE1 Adaptive Brake Light LG2 LED Intelligent Light System LG4 Rear, Brake, and Indicator Lights in LED Technology LG8 High Beam Assist Plus LX5 Europe M3E Electric Suction Fan Power Level 5 M60 Alternator 14 V/250 A MG9 Generator Management MJ8 ECO Start-Stop Function MO6 Emission Standard Euro 6D M/N1 Gr. II MU6 Engine OM654 DE 20 LA 140 kW (190 hp) MX0 BlueEFFICIENCY Package EZ5 Parking Package EZ8 PARKTRONIC F48 Windscreen Washer System Heater F64 Electrically Folding Exterior Mirrors F68 Heated and Electrically Adjustable Exterior Mirrors F72 Automatic Dimming Exterior and Interior Mirrors FK2 Chrome Radiator Grille FP2 Mirror Package Vito FP4 Chrome Interior Package FR8 Reversing Camera G43 9G-Tronic H00 Warm/Cool Air Duct to Passenger Compartment H12 Additional Hot Water Heater H15 Heated Passenger Seat H16 Heated Driver Seat H20 All-round Heat-Insulating Glass HH9 Semi-automatic Air Conditioning TEMPMATIC HY1 Remote Control for Additional Hot Water Heater HZ0 Electric Auxiliary Heater HZ7 Semi-automatic Air Conditioning, TEMPMATIC in Rear IL5 Left-Hand Drive Ledpsx N Sipefx Ahzsrg IL6 Metallic Paint IN2 Wheelbase 3200 mm, Long Overhang JA7 Blind Spot Assist JF1 Rain Sensor JP4 Lane Package JW5 Lane Keeping Assist JW8 Attention Assist JX2 Service Interval 40,000 km KB5 Main Fuel Tank 70 Liters LA2 Light Assist LE1 Adaptive Brake Light LG2 LED Intelligent Light System LG4 Rear, Brake, and Indicator Lights in LED Technology LG8 High Beam Assist Plus MG9 Generator Management MJ8 ECO Start-Stop Function MO6 Emission Standard Euro 6D M/N1 Gr. II MU6 Engine OM654 DE 20 LA 140 kW (190 hp) MX0 BlueEFFICIENCY Package RY2 Tire Pressure Monitoring Front and Rear Axle, Wireless SA6 Passenger Airbag SB1 Comfort Driver's Seat SB2 Comfort Passenger Seat SE5 Lumbar Support for Driver's Seat T19 Sliding Door Left US4 3-seater Comfort Bench 1st Row, Outer Seat Foldable US5 3-seater Comfort Bench 2nd Row, Foldable Outer Seat V23 Interior Trim Premium Version VL2 Velour Floor Mats VU9 Black Artico Man-made Leather W16 Fixed Window Front Left in Sidewall/Sliding Door W17 Fixed Window Front Right in Sidewall/Sliding Door W32 Electrically Operated Opening Window Passenger Compartment W65 Tailgate W70 Privacy Glazing in Rear, Tinted Glass W78 Rear Window in Tailgate/Rear Door with Wiper and Washer System Z2S Sport Line Z42 Registration as Passenger Car Z91 Special Model Tourer Edition ZM4 Combi Vehicle ZQ8 Tourer PRO

Condition: good (used), functionality: fully functional, mileage: 125,753 km, power: 140 kW (190.35 HP), fuel type: diesel, gearing type: automatic, wheelbase: 3,200 mm, overall weight: 3,100 kg, first registration: 10/2021, next inspection (TÜV): 09/2026, emission class: euro6, color: grey, number of seats: 8, number of previous owners: 1, Year of construction: 2021, Equipment: ABS, additional headlights, air conditioning, airbag, all-season tires, car registration, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, parking heater, parking sensors, power assisted steering, seat heater, sliding door, soot filter, 7831 Paint color: Graphite Grey metallic dark MB 7831 BA3 Active Brake Assist BH1 Hold Function CF7 Comfort Suspension CL3 Leather Steering Wheel CL4 Multifunction Steering Wheel with Trip Computer CM2 Bumpers and Attachments Painted in Body Color CN1 Exterior Sill Panels CU4 Aerodynamics Package D12 Roof Railing/Luggage Rack E07 Hill-start Assist E1D Digital Radio (DAB) E57 Trailer Socket Wiring EA4 Audio 40 EL9 2-way Speakers Front and Rear ES2 12V Socket in Luggage Compartment/Cargo Area ET4 Active Distance Assist DISTRONIC EY2 Pre-installation for Live Traffic Information JK3 Instrument Cluster with Pixel Matrix Display JP1 PRE-SAFE® JP4 Lane Package JW5 Lane Keeping Assist JW8 Attention Assist JX2 Service Interval 40,000 km KB5 Main Fuel Tank 70 Liters KP7 SCR Emission Control Generation 4 L Left-Hand Drive LA2 Light Assist LC4 Comfort Roof Control Unit LC8 Surround Lighting Tailgate LD9 Rear Compartment Interior Lights LE1 Adaptive Brake Light LG2 LED Intelligent Light System LG4 Rear, Brake, and Indicator Lights in LED Technology LG8 High Beam Assist Plus LX5 Europe M3E Electric Suction Fan Power Level 5 M60 Alternator 14 V/250 A MG9 Generator Management MJ8 ECO Start-Stop Function MO6 Emission Standard Euro 6D M/N1 Gr. II MU6 Engine OM654 DE 20 LA 140 kW (190 hp) MX0 BlueEFFICIENCY Package EZ5 Parking Package EZ8 PARKTRONIC F48 Windscreen Washer System Heater F64 Electrically Folding Exterior Mirrors F68 Heated and Electrically Adjustable Exterior Mirrors F72 Automatic Dimming Exterior and Interior Mirrors FK2 Chrome Radiator Grille FP2 Mirror Package Vito FP4 Chrome Interior Package FR8 Reversing Camera G43 9G-Tronic H00 Warm/Cool Air Duct to Passenger Compartment H12 Additional Hot Water Heater H15 Heated Passenger Seat H16 Heated Driver Seat H20 All-round Heat-Insulating Glass HH9 Semi-automatic Air Conditioning TEMPMATIC HY1 Remote Control for Additional Hot Water Heater HZ0 Electric Auxiliary Heater HZ7 Semi-automatic Air Conditioning, TEMPMATIC in Rear IL5 Left-Hand Drive Ledpfx Ahjx N Shrozorg IL6 Metallic Paint IN2 Wheelbase 3200 mm, Long Overhang JA7 Blind Spot Assist JF1 Rain Sensor JP4 Lane Package JW5 Lane Keeping Assist JW8 Attention Assist JX2 Service Interval 40,000 km KB5 Main Fuel Tank 70 Liters LA2 Light Assist LE1 Adaptive Brake Light LG2 LED Intelligent Light System LG4 Rear, Brake, and Indicator Lights in LED Technology LG8 High Beam Assist Plus MG9 Generator Management MJ8 ECO Start-Stop Function MO6 Emission Standard Euro 6D M/N1 Gr. II MU6 Engine OM654 DE 20 LA 140 kW (190 hp) MX0 BlueEFFICIENCY Package RY2 Tire Pressure Monitoring Front and Rear Axle, Wireless SA6 Passenger Airbag SB1 Comfort Driver's Seat SB2 Comfort Passenger Seat SE5 Lumbar Support for Driver's Seat T19 Sliding Door Left US4 3-seater Comfort Bench 1st Row, Outer Seat Foldable US5 3-seater Comfort Bench 2nd Row, Foldable Outer Seat V23 Interior Trim Premium Version VL2 Velour Floor Mats VU9 Black Artico Man-made Leather W16 Fixed Window Front Left in Sidewall/Sliding Door W17 Fixed Window Front Right in Sidewall/Sliding Door W32 Electrically Operated Opening Window Passenger Compartment W65 Tailgate W70 Privacy Glazing in Rear, Tinted Glass W78 Rear Window in Tailgate/Rear Door with Wiper and Washer System Z2S Sport Line Z42 Registration as Passenger Car Z91 Special Model Tourer Edition ZM4 Combi Vehicle ZQ8 Tourer PRO

Condition: new, maximum load weight: 32,900 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 10,160 mm, loading space width: 2,460 mm, loading space height: 2,200 mm, loading space volume: 55 m³, Year of construction: 2025, Equipment: ABS, New Vehicle – Immediately Available! For sale, rental, or lease with purchase option by arrangement! Approx. 55 m³ Granalu aluminium tipping semi-trailer / combination tailgate / new vehicle / also available for rental! --- * Manufacturer: Granalu * Model: AERO – Grain Tipping Trailer * First registration: - (New vehicle) * Gross weight: 39,000 kg * Unladen weight (manufacturer spec.): 6,100 kg * Payload: 32,900 kg * Axles: 3x Jost axles with first axle lift / off-road starting aid / disc brakes * Suspension: Air suspension with raise and lower function * Tyres: 385/65 R22.5 * Colour: Tipper body & tarpaulin RAL 7001 silver grey, chassis RAL 7016 anthracite/graphite grey * EBS: Wabco * Combination tailgate (swing & pendulum gates) with 2x grain discharge chutes * 1x rotary bar lock per swing door Lrodpfx Ahsw I I H Hjzeg * Additional locks on the sides and below the rear wall * Front wall sloped, 5 mm aluminium * Side walls: 6 mm aluminium, tapering to 3 mm towards top rail * Floor: 6 mm aluminium * Aluminium chassis * Aluminium landing legs * Hyva tipping cylinder (max. 250 bar), high and low pressure * Fifth wheel height: 1,200 mm (unladen) * Sliding tarpaulin with central locking * 4 crossmembers (3 pivotable) * Operator platform at front with access on the left * Internal front left access ladder * Tarpaulin hooks * Automatic lowering when tipping * Water tank * Toolbox * Aluminium ladder * Wheel chocks * Shovel and broom holder * Acoustic reverse warning system * 2x LED reversing lights * 5-chamber LED rear lights * Foldable underrun protection * Single mudguards New Vehicle – Immediately Available! For sale, rental, or lease with purchase option by arrangement! Notice regarding potential errors in this advertisement: Despite careful preparation, there may be occasional errors in the text or information provided. We accept no liability for mistakes, changes, or prior sale. All information provided without guarantee. Please contact us to confirm details or clarify any further questions.

Condition: used, Year of construction: 2000, Used machine Year of manufacture: 2000 Equipment and technical specifications: - Grinding unit can be swiveled via hand crank - The machine base is made of welded steel, ensuring high torsional rigidity and vibration-free operation - Oscillating sanding belt with a separate geared motor for improved sanding results - Oscillation can be optionally switched on - Graphite-coated sanding shoe for longer sanding belt service life - Height-adjustable sanding table allows use of the full sanding belt width - Additional table for sanding radii with integrated extraction ports - Spring-loaded belt tensioning system automatically compensates for differences in belt length - Equipped with adjustable stops, making it ideal for veneer sanding - Veneer overhang can be easily sanded down - With mobile undercarriage - Oscillation motor power: 0.11 kW - Mains voltage: 400 V - Frequency: 50 Hz - Sanding belt length: 2,640 mm - Sanding belt width: 150 mm - Belt speed: 14 m/s - Oscillation stroke: 15 mm - Sanding surface length: 800 mm - Sanding surface width: 150 mm Lrodpfx Aowkbcbehzog - Grinding unit swivel range: 0–45° - Worktable length: 950 mm - Worktable width: 450 mm - Worktable height adjustment: 110 mm - Dimensions: 1,700 × 1,000 × 1,150 mm - Weight: 300 kg Availability: short-term Location: Flörsheim

Condition: new, Year of construction: 2025, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Ledpshwaapsfx Ahzerg Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, For sale is a 3-axis CNC machining center of the brand Ingersoll and type OPS 800. Ideal for the production of graphite electrodes thanks to the built-in high-speed spindle The machine is fully functional and ready for immediate use Technical data Year of construction: 2004 X-path: 800 mm Y-path: 700 mm Z-path: 500 mm Control: ANDRON Spindle speed: 42,000 min/-1 Tool changer: 36-fold Tool holder: HSK 63 incl. Graphite extraction: Chip trays Cooling system Ledpjuu Rthefx Ahzjrg WKZ not included For sale is a 3-axis CNC machining center of the brand Ingersoll and type OPS 800. Ideal for the production of graphite electrodes thanks to the built-in high-speed spindle The machine is fully functional and ready for immediate use Technical data Year of construction: 2004 X-path: 800 mm Y-path: 700 mm Z-path: 500 mm Control: ANDRON Spindle speed: 42,000 min/-1 Tool changer: 36-fold Tool holder: HSK 63 incl. Graphite extraction: Chip trays Cooling system WKZ not included On request, transportation and loading can be organized for an extra charge. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website