Used Grinding Wheels for sale (22,898)

Condition: new, Year of construction: 2023, grinding wheel size 300x145x160 mm Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer T1SP 300x145x160 M1.5 EW20° 4GG from the company 3M Profiling according to specification module m, running speed gg, pressure angle EW Fodpfxsul Ef Hs Aayopl Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools

Year of construction: 2007, condition: used, control Siemens 840D grinding wheel diameter 900 mm Workpiece - grinding width 144 - 152 mm Fpodpfxjxq Hkuo Aayol Workpiece - grinding dimension 22 - 25 mm turning speeds 24 m/s: 1.425 U/min peripheral speed max. 25 m/sec capacity 37 kW total power requirement 75 kW weight ca. 18,0 t dimensions of the machine ca. L 4,9 x B 4,9 x H 2,6 m In our opinion, the machine is in good condition used condition. Double face side grinders The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: excellent (used), PERFECT PFG-70150AHRD Surface Grinding Machine Year 2014 Table size 700 x 1500 mm Maximum longitudinal travel 1650 mm Maximum cross travel 760 mm Maximum distance table surface to spindle centre 600 mm Table speed 5 – 25 m/min Magnetic chuck size 700 x 1500 mm Spindle speed 1450 rpm Spindle motor 7.5 kW (10 HP) Grinding wheel size 355 x 40 x 127 mm Floor space required 4810 x 2550 mm Weight 7800 kg Supplied with: Automatic Downfeed System, 1500 x 700 mm Electromagnetic Chuck, Demagnetising Unit, 2 Axis Digital Readout, Remote Handwheel, Spindle Motor Speed Inverter Control, Automatic Paper Strip Filter & Magnetic Separator, Machine Pads & Levelling Bolts, Low Voltage Work Light. For sale with Jet Machinery Ltd Jet Machinery Stock No: #27039 Machine Serial Number: 1485022 Cost: £49,950.00 + VAT Fpodpfjzuxt Aox Aayel Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 1980, machine/vehicle number: 46.60, workpiece length:310 mm Fodpfx Ajcxxlroayjpl work piece width:150 mm workpiece height:210 mm spindle speed max.:2800 U/min distance grinding wheel - table:280 mm magnetic clamping plate: magnetic:300 x 150 x 70 mm spindle throat:250 mm Column-Diameter:130 mm total power requirement:1,9 kW weight of the machine ca.:0,58 t dimensions of the machine ca.:0,62 x 0,72 x 1,80 m

Condition: used, Year of construction: 1990, Technical details: adjustment drive of the grinding de: 0,0025 - 0,05 mm total power requirement: 100 kW adjustment of grinding head slide: 150 mm weight of the machine ca.: 17 t grinding spindle drive: 2 x 37 kW grinding width: 30-150 mm peripheral speed: 34 m/sec workpiece speeds: 60 - 300 mm/Sek. grinding height: 70 mm grinding wheel diameter: 750 mm grinding tools: 750 x 75 x 350 mm Fpedpfx Aajvnmnreyel grinding wheel turning speeds: 870 U/Min. max. workpiece diameter: 250 mm

Condition: excellent (used), Year of construction: 1999, max. width of grinding wheel 15 mm max. dia. of grinding wheel 110 mm Fpsdpfovibc Hox Aayjl max. module 0,5 - 10 pressure angle 15 - 25 ° turning speeds 2800 U/min total power requirement 0,4 kW weight of the machine ca. 0,02 t dimensions of the machine ca. 0,4 x 0,2 x 0,2 m For profiling grinding snails for tooth flank grinding machines. Finished and after-profile on the following models: NZA, AZA, RZ 300 E, RZ 301 S, Rz 362 A, AM, ... Adjustment plate on the right with micrometer screw adjustment axial Radial adjustment plate with micrometer screw adjustment 2 precision motor spindles to absorb the diamond discs.

Condition: used, Year of construction: 2004, grinding wheel diameter 660 mm Fjdpfxoxq R Has Aayjpl Control Siemens 840D work piece width min. 5 / max. 180 mm max. workpiece diameter 200 mm weight of the machine ca. 15,0 t dimensions of the machine ca. L 3,1 x B 4,0 x 2,7 m In our opinion, the machine is in good used condition. The machines were used for the production of connecting rods. Two machines are available. One machine is suitable for pre-grinding and one for regrinding. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: new, max. width of grinding wheel 145 mm diameter / bore of grinding wheel 300 mm Flange taper Reishauer 0 grinding wheel size 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc T1SP 300x145x160 M1 EW20° 2GG from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Fedpfx Aasuayymsyopl Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools

Condition: new, functionality: fully functional, Year of construction: 2026, The high-performance CBN borazon grinding wheel designed for the CORMAK DG20M drill sharpener is a key component ensuring precise sharpening of drills made of HSS high-speed steels and cobalt steels. It offers exceptional durability and accuracy essential in daily operations of toolrooms, mechanical workshops or maintenance departments. Main advantages of the DG20 grinding wheel High hardness and thermal resistance thanks to the CBN (borazon) abrasive material. Compatibility with the CORMAK DG20M sharpener – a wheel designed for this model guarantees perfect fit and maximum efficiency. Fodpfx Aasycq Hrjyopl Vibration-free operation due to precise balancing – reduces the risk of tool damage and improves user comfort. Long service life – significantly reduced replacement frequency and lower operating costs. Stable geometry – no need for frequent shape correction, enabling consistent sharpening quality. Construction and technology The grinding wheel for the CORMAK DG20M drill sharpener is manufactured with CBN technology – borazon is one of the hardest abrasive materials known, ideally suited for machining high-speed steel tools. Thanks to precise workmanship and an optimised profile, the wheel ensures high sharpening efficiency while minimising material loss from the tool. Precision and work efficiency The use of an original CBN wheel in the CORMAK DG20 model provides excellent results even during long operating cycles. The wheel maintains an accurate point angle (within 90–135°), which affects cutting quality, reduces cutting forces and increases the service life of sharpened drills. Its vibration-damping properties minimise the risk of micro-chipping on cutting edges. Choose quality – select the original DG20M grinding wheel The CBN wheel for the CORMAK DG20M sharpener is an essential component for anyone who expects precision and reliability during drill sharpening. Thanks to its construction, material and perfect fit to the machine, it delivers long-lasting, efficient and repeatable operation. Order the original wheel today and keep your sharpener in full working condition.

Condition: new, Year of construction: 2026, functionality: fully functional, CBN Borazon Grinding Wheel for CORMAK DG13M Drill Sharpener – precise and durable grinding disc High-quality CBN borazon grinding wheel dedicated to the CORMAK DG13M drill sharpener is a consumable element that directly affects sharpening quality and the service life of cutting tools. It ensures precise HSS drill sharpening across the full range handled by the machine. Its construction is optimised for demanding workshop and industrial conditions, offering high efficiency and minimal abrasive wear. Main product advantages Dedicated to the CORMAK DG13M sharpener – ensures perfect fit and optimal operating parameters. CBN (borazon) abrasive material – optimal for sharpening HSS high-speed steel tools. Vibration-free operation – high dynamic balance of the wheel eliminates vibrations and improves sharpening quality. High durability – significantly outlasts standard aluminium oxide wheels. Stable sharpening parameters – ensures repeatability and accuracy even during series regeneration of drills. Construction and technology CBN wheel (Cubic Boron Nitride) is the second hardest abrasive material after diamond, yet far more resistant to temperature and wear when working with HSS steel. The specialised bond and precise geometry make it ideal for applications in sharpeners such as the CORMAK DG13M, where edge accuracy and long tool life are essential. The wheel is optimised for direct mounting on the machine spindle axis, ensuring minimal runout and reliable grinding performance. Precision and work efficiency The use of a CBN wheel in drill sharpeners such as the DG13M results in significantly improved operating parameters: shorter sharpening time, lower tool temperature and reduced risk of burning. The high rigidity of the abrasive allows for a uniform and sharp cutting edge while maintaining the correct rake angle and drill geometry. This makes drill sharpening more repeatable and efficient. Ensure the highest sharpening quality – choose a grinding wheel for the CORMAK DG13M sharpener Replacing a worn wheel with the original CBN borazon grinding wheel ensures optimal sharpening quality in drill sharpeners. Thanks to the wheel’s high efficiency and durability, you minimise downtime and improve process performance. Order now and restore full precision to your CORMAK DG13M drill sharpener! Fjdpfxjycqt Se Aayjpl

Condition: good (used), Grinding wheel mount, standard flanges, special flanges, grinding wheel flange Fpedpfx Aown Dkvsayel -Grinding wheel mount: Mounting diameter: Ø 76 mm -Shaft: Perforated shaft cone Ø 30-35 mm -Quantity: 2x mounting flanges available, 2 pieces without balancing weights -Price: per piece -Dimensions: Ø 148 x 55 mm -Weight: 3.9 kg/pc.

Condition: new, max. width of grinding wheel 145 mm Fedpfxjuayyye Aayopl diameter / bore of grinding wheel 300 mm Flange taper Reishauer 0 grinding wheel size 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc T1SP 300x145x160 M 2,25 EW20° 3GG from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools

Condition: new, max. width of grinding wheel 145 mm diameter / bore of grinding wheel 300 mm Flange taper Reishauer 0 grinding wheel size 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc T1SP 300x145x160 M 1,5 EW20° 3GG from the company 3M Fodpfx Aaouayy Hjyjpl Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools

Condition: new, max. width of grinding wheel 145 mm diameter / bore of grinding wheel 300 mm Flange taper Reishauer 0 Fpodpfouayy Tex Aaysl grinding wheel size 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc T1SP 300x145x160 M 2,5 EW20° 3GG Cubitron from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools

Condition: used, Year of construction: 1969, grinding height 60 mm grinding width 120 mm Fpodpfx Aajt Hw N Hjysl grinding wheel diameter 600 mm grinding length mm workpiece height 60 mm total power requirement 50 kW weight of the machine ca. 7000 kg dimensions of the machine ca. m D I S K U S (Germany) Double Side Vertical Spindle Surface Grinder, C-Frame Design, with Rotary Workpiece Feeding System and Automatic Dressing Device Model DDS 600 CR-A Year 1969 Serial-No. 6672 _____ Grinding wheels Ø x bore, each 600 mm Grinding wheels height x width, approx. 60 mm Workpiece dimensions: Grinding height x grinding width, approx. 60 x 120 mm Vertical adjustment of each grinding head 150 mm External Ø of workpiece carrier disk, approx. 810 mm Feeds of rotary workpiece feed system 14 – 145 mm/sec Grinding wheel speeds, each, infinitely variable 765 rpm (24 m/s) Grinding spindle drive, each 22 kW Total electrical load, approx. 50 kW - 380 V - 50 Hz Total weight, approx. 7,000 kg Accessories / Special Features: * Rotary workpiece feed system with infinitely variable speed adjustment prepared with workpiece carrier disk approx. dia. 800 mm with relevant workpiece shaped pockets and after the grinding the parts will be automatically sorted out and collected in a collector box. * IONIC – Size Control Unit Model Nr. 9 So with measuring probe for the ground workpieces and with signal for the hydraulic infeed of the grinding wheel when size is not in order. * Automatic Dressing Device for the grinding wheels, hydraulically operated and with the automatic return of the grinding wheels after dressing cycle to the previously adjusted position and to continue the working cycle. Dressing cycle can be presetted by a timer or a manual release. * Manually operated infeed device of the Spindle slide to optimal workpiece thickness. * Spindle drives controlled by Ampere-Meters. * Separate switch cabinet. * Separate hydraulic unit. * Various carrier disks, etc. * Safety covers. * Central lubrication. * Large Coolant device with paperbandfilter This machine is ideal for double-sided simultaneous grinding of parallel workpiece surfaces by continuous method, for maximum output and accuracy in mass production (e.g. Piston rings, washers, hydraulic parts, and other punched parts.) Condition : Good . Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 1998, control Siemens Sinumerik Fjdpfjxuv Udjx Aayopl grinding wheel diameter 900 mm grinding wheel width 20-80 mm In our opinion, the machine is in good condition used condition. Double face side grinders The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: good (used), Year of construction: 1981, Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 1.1 kW -Speed: 1410 rpm -Peripheral speed: 45 m/s -Grinding discs: max. Ø 300 mm Fpedpfx Asb A Nkvjaysl -Operating voltage: 380 volts -Weight: 290 kg

Condition: used, Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone -Receptacle: Perforated shaft cone Ø 62-69 mm / left weight. -Grinding disc: Ø 376 x 30 mm -Total weight: 28 kg Fjdpfx Aoqva I Aeayjpl

Condition: used, Grinding wheels, grinding wheels, cup wheel, double grinding stand, surface grinding wheel -Grinding wheel: grinding wheel Fjdpfx Aaoqva I Royepl -Outside: Ø 495 mm -Width: 30mm -Receptacle: Ø 203 mm -Total weight: 9.2 kg

Condition: good (used), Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder Fjdsb A Nlkspfx Aayepl -Engine power: 1.5 kW -Speed: 1430 rpm -Grinding discs: max. Ø 300 mm -Operating voltage: 380 volts -Dimensions: 700/550/H1200 mm -Weight: 170 kg

Condition: used, Year of construction: 1998, Technical details: height of profile: 180 mm Fpodpfsu Ngrqjx Aaysl max. dia. of grinding wheel: 200 / Topfscheibe mm grinding wheel hole diameter: k.A. grinding spindle speed: 2800 U/min Table dimensions: LxB: 500 x 160mm mm voltage: 220 / 380 V total power requirement: 3,0 kW weight of the machine ca.: 0,57 t dimension machine xH: 1,28 x 1,0 x 1,75 m Application for face grinding Magnet mount: LxW = 680 x 200mm; tilt approx. 15°; swivel 360° via radial scale magnet: Type S2D; permanent magnet, clamping surface 300 x 150mm. Grinding wheel support: -adjustment vertical = length 180mm manual; swivel = approx. 45° right/left manual. Operation via control panel on machine. Coolant tank with pump and feed *

Condition: used, Sandpaper, emery paper, abrasive cloth, sanding discs, grinding wheels Fpedpsd Sqykefx Aayel -Outer diameter: 505 mm -Width: 65 mm -Inside diameter: 127 mm -ENR.625 EK-30/3-M-KE -Price: per piece -Number: 3 pieces -Weight: 27 kg

Condition: used, Sandpaper, emery paper, abrasive cloth, sanding discs, grinding wheels -Fuchs: EKW 46 K/5 KE -Outer diameter: 300 mm -Width: 13 mm -Inside diameter: 100 mm Fjdpfod Srxmex Aayspl -Price: per piece -Number: 4 pieces -Weight: 1.9 kg

Condition: used, Tschudin HTG310 Universal Cylindrical Grinder Centre height: 100mm Distance between centres: 340mm (13.4") Maximum grinding diameter: 200mm Maximum grinding length: 340mm Hydraulic table traverse Table swivel: ±11° Wheelhead swivel: ±5° Workhead swivel: 360° Fpedpfszrt Ipox Aayjl Infinitely variable workhead spindle speed: 50–500 RPM Automatic plunge and traverse grinding cycles Automatic infeed with adjustable spark-out timer Rapid wheelhead advance and retract Hydrodynamic wheelhead bearings for exceptional accuracy Grinding wheel size: 350 x 50 x 127mm (14" x 2" x 5") Fitted With Hydraulic table drive Universal workhead Tailstock Coolant system Wheel guard Machine lighting

Condition: good (used), Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder Fedpfsb A Naujx Aayspl -Motor power: 1.1 kW -Speed: 1410 rpm -Grinding discs: max. Ø 300 mm -Operating voltage: 380 volts -Weight: 200 kg