Used Hacker Knife for sale (1,494)

Condition: new, Year of construction: 2024, Chopper Knife 40 x 40 concave Knife for Weima, Large ..... Hsdjbxu Dhopfx Abvjfd For almost all common chippers / shredders From stock Bitburg Subject to prior sale

Condition: ready for operation (used), Year of construction: 1999, IMMEDIATELY AVAILABLE, chamber filter press from Häcker with base frame and 50 m3/h Abel pump, plate format 1200 x 1200 mm, approx. 90 PP plates, 30 mm cake, content approx. 2700 liters, automatic. Plate transport, open outlet in filtrate trough on both sides, press is ready for use immediately after assembly, Abel pump was serviced by the manufacturer shortly before it was taken out of service, galvanized base frame with staircase, location is near Würzburg / Germany Hfedpfx Abjrunu Isvsd

Condition: like new (used), functionality: fully functional, We are offering an as-new HÄCKER chamber filter press Type 01.120 with a new control cabinet. Electrohydraulics with a double-acting cylinder. Equipped with new filter plates, which can be configured as needed for your application. Includes the following additional equipment: - Automatic plate shifting device with automatic shaking system - Light barriers on both sides - Automatic filtrate drip trays Technical specifications: Condition: Demonstration unit, unused Plate size: 1,200 x 1,200 mm Number of chambers: optional, depending on plate pack and application Cake thickness: optional, depending on plate pack and application Capacity: 2,650 liters Filter area: 175 m² Operating pressure: 10 bar Drive power: 2.2 kW Discharge is open via a filtrate corner and a filtrate trough. We can also offer you a matching HÄCKER piston pump for this filter press. Hedpfx Aboyhn H Tsvjfd For further details or technical questions, please feel free to contact us at the provided phone number or email address at any time.

Condition: used, functionality: fully functional, We offer a factory-refurbished HÄCKER chamber filter press type 01.080 with automatic control. Electrohydraulics with single-acting cylinder Elevated design for positioning underneath tipping containers Control of the feed pump with automatic press-full detection. Technical data: Hsdpfx Abeyhnyaevsfd Condition: used, factory-refurbished Plate size: 800x800mm Number of chambers: 40 Cake thickness: 25mm Volume: 500L Filter area: 44m² Feed pressure: 10 bar Open discharge via filtrate corner, with filtrate channel, drip plate available. We can also offer you a used HÄCKER piston pump to match this filter press. For further details and any technical questions, please feel free to contact us at the phone number or email address provided.

Condition: used, functionality: fully functional, We offer a factory-refurbished HÄCKER chamber filter press, type 01.080. Electrohydraulic system with single-acting cylinder Raised version for placement of tipping containers underneath Technical specifications: Condition: used, factory-refurbished Plate size: 800x800 mm Number of chambers: 40 Hfedpfxsyhnwlj Abvsd Cake thickness: 25 mm Capacity: 500 liters Filtration area: 44 m² Operating pressure: 10 bar Open discharge via filtrate spout, with filtrate trough and drip plates. We can also offer a used HÄCKER piston pump to suit this filter press. For further details and technical questions, please feel free to contact us at the provided telephone number or email address at any time.

Condition: excellent (used), Year of construction: 1994, Weinig 925 Rondomat profile knife grinder Stock code: 15443 Price: request for quotation $ Subcategory: Knife grinders Producer: Weinig Model: 925 Condition: used Tag number: 15443 Machine type: Grinding machines UMCC: G6775 Producer: Weinig Model: 925 Rondomat Year: 1992 Serial number: 925-438 Description: Weinig 925 Rondomat profile knife grinder We offer turnkey services with this machine. Hodpfx Ajn Ut Slobvjfd Printable page Get a quote General technical data Shaft length 9-1/2 inches Maximum tool diameter 9 inches Motor 1.5 HP, 220/440 V 8-7/8 Maximum wheel diameter Variable grinding wheel speeds: 1700, 2000, 2250, 2800 rpm Relief angle for back relief: 15 - 45 degrees Axial: 0 - 10 degrees Cooling liquid

Condition: used, functionality: fully functional, In this offer you buy a used trimmer "Canon 2-Knife Trimmer A1" Object of sale: 1 x Canon 2-knife trimmer A1 suitable for various Canon models. Condition: This offer is for a used device, which may show signs of use (minor scratches or yellowing). Hfjdpjwpd Tysfx Abvod The device has been tested for function Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Condition: used, functionality: fully functional, In this offer you buy a used 2-Knife Trimmer ‘SDD B4K/BT25 2-Knife Trimmer for Xerox’ Object of sale: 1 x SDD B4K/BT25 for various Xerox machines Counter readings: Total: Approx. 37,158 cuts Hedpju S An Defx Abvefd Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function A test brochure can be seen in the photo Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: refurbished (used), We offer various piston pumps from Häcker, PP design, various sizes from 1 - 10 m3/h, up to 10 bar, cpl. overhauled Hedpfx Aoikl Tpobvofd

Condition: refurbished (used), Used, complete reconditioned, 1 year warranty, plate size 400 x 400 mm, 20 plates, open spout, 25 mm cake thickness, pressure max. 10 bar, capacity approx. 60 liters, filter surface 5m², dimensions 2500 x 700 x 1500 mm, weight 1000 kg, engine hydraulics, drip tray, filtrate, with or without filter cloths, piston pump incl. Piping with built Hfodpfx Aefbbpqebvod

Year of construction: 1987, condition: ready for operation (used), Knife grinders for 800 kofama lignum strips Sharpening bar 800 used 1987 Rating: Table Model: 800 Description: Hfsdpsh S Upiefx Abvjd 800 grinders with a slat knife

Condition: used, Year of construction: 2005, Three knife trimmer Müller Martini Esprit (1576) Year: 2005 For three side trimming of book blocks and brochures, operable in connection with book production lines. Description: - Colour monitor with touchscreen - Automatic setting Hsdpfxsvxfkge Abvefd - Infeed conveyor from the left - Left hand infeed - Exchangeable cutting tables, number: 3 - 11 - Sets of knives: 2 Technical specifications: - mechanical speed: up to 2.000 cycles/h - size range untrimmed max.: 391 x 320 mm - size range untrimmed min.: 148 x 95 mm - size range trimmed max.: 311 x 305 mm - size range trimmed min.: 142 x 75 mm - book thickness: 2 - 80 mm

Condition: excellent (used), Year of construction: 2019, Ref: 10965 . 2019 Horizon HT-1000V Variable Trimmer ONLY 2.2m books trimmed! Inline or offline variable three-knife trimmer capable of zero make-ready on book trim size and thickness changes. Perfect for short run production, and book of one production which can be achieved through barcode driven set-up. Features: Setup automatically on the fly by reading a barcode at the entrance of the trimmer. Also capable of automatic set-up from the operator panel for same size production runs. One-to-one book production with variable sizes can be produced. Both untrimmed and trimmed sizes can be variable, for true variable format production. Can be used solo or placed in-line with Horizon perfect binders. Specification: Untrimmed Book Size: Max. Spine Length 350 x Fore-edge Length 320 mm/ 13.780” x 12.600” Limitation: Maximum length from the center to top or bottom is 175 mm/ 6.889”. Min. Spine Length 148 x Fore-edge Length 105 mm/ 5.825” x 4.130” Limitation: The minimum length from the center to top or bottom is 74 mm/ 2.91”. Trim Width: Fore-edge: Max. 110 mm/ 4.330” Min. 1 mm/ 0.04” Top and bottom: Max. 80 mm/ 3.150” Min. 1 mm/ 0.04” Trim Height: 1 to 65 mm/ 0.04” to 2.560” Production Speed: Hfjdpfx Abewu Sptsvjd 400 to 1,000 cycles per hour (Higher production can be reached with piled books)

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, REFORM AR 101/61 Blade grinding machine available immediately. 8100mm grinding length Hsdpfeygvluex Abvjfd Please contact us for more information.

Condition: used, Year of construction: 2001, Three knife trimmer Müller Martini Merit S Year: 2001 Hour counter: 30400 Description: - Digital display - Infeed conveyor from the left - Automatic hopper feeder for inline production - Exchangeable cutting tables (standard set) - Knife pre-setting device Hsdpjylblkefx Abvefd - Set of knife holders: 2 - Sets of knives: 2 Maximum size (uncutted): 384 x 320 mm Minimum size (uncutted): 140 x 103 mm Maximum size (cutted): 434 x 310 x 80 mm Minimum size (cutted): 136 x 100 x 2 mm Max. mechanical speed: 1.000 - 4.000 cycles / hour Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, offer consists of: Hfjdpfx Asxr Adgobvod extra knife for Horizon, set of 2 FC-20A + FC-20 - weight: Lower knife 1,02kg; Upper knife 1,90kg = 2,92kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: used, Year of construction: 2004, Three knife trimmer Kolbus HD 142.P Year 2004 Description: Hfedewnbv Ajpfx Abvod - Co-Pilot with touchscreen - Semi automatic setting - Right hand infeed - Counter stacker - Exchangeable cutting tables (standard set) - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 2 Kolbus: HD 142.P Maximum size (cutted): 305 x 420 x 80 mm (WxHxT) Minimum size (cutted): 100 x 100 x 2 mm (WxHxT) Maximum size (uncutted): 310 x 430 x 80 mm (WxHxT) Maximum pile height: 80 mm Max. mechanical speed: 3.900 cuts/h Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Frame die-cutter - Swivel frame die-cutter - Flatbed die-cutter - Platen die-cutter - Eccentric press Punch + feed for the use of bandknife punching tools Flatbed die cutter HELMERDING type PSH 25 Com. No. EP 97784 Machine. No. 6073 Year of construction 1998 Compressive force 25 ton. Clearance between the tie rods 700 mm Table surface = installation space 800 x 670 mm Table surface = installation frame width 510 x depth 440 mm, plate thickness 20 mm Plunger surface 800 x 670 mm Hole in the table 490 x 420 mm Plunger stroke 45 mm Ram adjustment travel 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min. Motor power 15 kW Mains connection 400 Volt, 50 Hz - Controlled drive for infinitely variable stroke rate - Pneumatic clutch-brake combination - ram compensation cylinder - VOGEL automatic central lubrication system Hfedpfxedzqmze Abvjd - solid base plate with 4 swinging elements under the machine Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons good condition The machine was formerly used for cutting out cardboard blanks. Ideal for cutting out non-woven fabrics or similar for breathing masks.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Weinig Rondamat 980 Year 2010 Technical data: Max. tool width: 330 mm Hfsdpfx Abowvvylsvjd With PowerLock: 322 mm Tool flight circle: 100 - 300 mm With PowerLock (optional): 100 - 250 mm Grinding wheel diameter: 125 - 200 mm Spindle speed frequency-controlled: 1500 - 4600 rpm Grinding spindle drive: 1.5 kW

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 2002-045, Used CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm Multifunctional CAM cutting system with CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other flat, semi-flexible, or rigid, non-metallic materials Equipment of the used machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold with a CCD camera for detecting print marks • Multifunctional tool head for holding 2 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with gray conveyor belt table as standard. Green-blue replacement conveyor available (provides high contrast for dark materials) Additional tools are available (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven circular knife • UCT universal knife (pull knife) • KCT kiss-cut tool • CTT creasing tool • V-cut angle cutter • Printer mark recognition • Camera registration • Punching tool for notches or holes Hjdpfsfnlkwjx Abvsfd • Milling cutter with suction device User-friendly • Easily replaceable cutting tools, “PLUG & CUT” • Intuitive user interface • Easy blade replacement • Vacuum zones can be activated with a click Fast amortization • Low costs with high added value • Optimal material utilization thanks to nest expert software modules (not included in the equipment) • High speed • Consistent precision Data: • Short cutting times thanks to high positioning speed of up to 90 m/min • Repeat accuracy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both sheet material and roll material (can be expanded with a suitable unwinder) • Fast amortization (Product photo as an example) The machine is CE certified.

Condition: used, Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, Used machine CNC cutter/plotter Cutting area in X and Y: 3,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade Hfsdjif Ek Rspfx Abvjd • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: used, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2025-078, working width: 1,600 mm, working height: 100 mm, cutting width (max.): 1,600 mm, number of slots in tool magazine: 2, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Hjdpfswgc I Rsx Abvsfd Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: excellent (used), Format (cm): 55 Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Hfedpfx Abon Atd Ujvsd

Year of construction: 2006, condition: excellent (used), machine/vehicle number: FR.EAA0-00271, Pr. No.: 1224418281 Hfjdpfjhrnbcsx Abvod

Condition: excellent (used), 4X RESERVE KNIFE FOR WOHLENBERG 155 Hfedpfx Asikzkcobved Format (cm): 155 * 1x brand new / unused Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST