Used Hand Thread Drill for sale (14,149)

Condition: good (used), functionality: fully functional, type of input current: AC, Pee-Wee Model P24US Hydraulic Thread Rolling Machine for in-feed or thru-feed rolling with helical thru-feed dies Max. rolling pressure: 24 tons Max rolling diameter: 75mm Min rolling diameter: 5mm Max rolling width: 200mm Diameter of rolling spindles: 69.85mm & 80mm Max thread die diameter:210mm Cjdpfexl Ebhsx Aphord Variable spindle speeds: 20 -90 rpm With one pair of spindle sleeves 69.85mm i.d. x 80mm o.d. & 14 sets of thread dies 60mm, 120mm & 180mm wide from M6 to M24

Condition: reconditioned (used), workpiece diameter (max.): 60 mm, roll diameter: 185 mm, roll width: 150 mm, One - Reconditioned ORT Model RP18 - 18 ton Hydraulic Thread Rolling Machine with fixed rolling spindles for in-feed rolling or thru -feed rolling with helical thru-feed dies. Including new rolling spindles , new bearings and new worm gears & shafts etc Max rolling dia: 60mm - Max rolling width with in-feed dies: 150mm - Max rolling width with thru-feed dies: infinite Spindle diameter : 69.85mm & 80mm - Power of main motor: 7.5kw With one pair of spindle sleeves 69.85mm i.d. x 80mmo.d. & 17 sets thread dies 60mm, 120mm & 180mm wide from M6 to M24 Cjdpfx Aoyml Ekephsrd Photographs taken before reconditioning

Condition: used, Year of construction: 1981, functionality: fully functional, machine/vehicle number: 4691, thread length: 125 mm, overall weight: 2,000 kg, workpiece diameter (max.): 70 mm, spindle diameter: 6,985 mm, type of input current: three-phase, roll diameter: 195 mm, spindle speed (max.): 90 rpm, spindle speed (min.): 20 rpm, total height: 1,185 mm, total length: 1,320 mm, total width: 1,090 mm, This is a fine example of a very little used Eurfurt thread rolling machine. Although the machines signifies 12.5tons it can easily achieve 20tons rolling force. Comes with all original equipment supplied. Machine can be used in manual, semi-automatic and automatic cycles and also has the facility to re-roll. Can be seen running. Crsdpfx Apezhw Edehod

Condition: excellent (used), Year of construction: 2022, Specification: Vertical Drill Block with 13 Spindles Credpfjzdki Uex Aphed Horizontal drill block with 4 spindles in the X Horizontal drill block with 2 spindles in the Y Grooving Saw D=100mm Plausibility check 10kw tool change spindle 4 position tool changer Workpiece length max 200-3050mm Workpiece width 70-850mm Workpiece thickness 8-56mm Powertouch screen Woodwop for machine Energy Saving Mode

Condition: used, Year of construction: 2016, Ref:11045 . 2016 Dürselen PB 04 N Paper Drill Free standing 4 headed paper drill Equipped with: Four drilling heads with adjustable spacing. Pneumatic cooling and lubrication for drills. Automatic drilling cycle, foot pedal control. Waste directed to outer door Drill table with adjustment, front and side margins. Table lock is automatically released. Technical data: Codpfx Asx Nfp Asphjrd Diameter of the drill: 2-10 mm, Stack height: 60 mm.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, SHARPENING MACHINE MOD. APE 40 UP TECHNICAL SPECIFICATIONS: Crsdpfozhplcox Aphod Sharpening diameter from 2 to 40 mm Right and left cutting edges from 1 to 12 Drill angle 40°-180° Horizontal wheel center electric spindle power 0.76 kW Vertical wheel center electric spindle power 0.18 kW Pump motor power 0.06 kW Approximate weight 230 kg Machine dimensions mm 1040 x 750 x 1330

Condition: used, Year of construction: 2011, total width: 1,500 mm, total length: 3,000 mm, total height: 1,750 mm, Colour: White Empty weight: 450 kg - Year: 2011 - Documentation available: No - CE certificate present: No - Serial number: 11060282 - Main motor power [kW]: 1.3 - Table length [mm]: 2000 Crsdszizqgopfx Aphed - Table width [mm]: 520 - Max. drilling stroke [mm]: 60 - Number of spindles [pcs]: 27 - Spindle speed: Manual - Min. spindle speed [rpm]: 2820 - Max. spindle speed [rpm]: 2820 - Distance between spindles [mm]: 30 - Workpiece clamps [pcs]: 10 - Workpiece support/Guide: Traverses - Drills included: Yes - Voltage [V]: 400 - Current consumption [A]: 3 - Fuse [A]: 16 - Power [kW]: 1.5 - Transport dimensions: 3000mm x 1500mm x 1750mm (l x w x h) - Transport weight [kg]: 450kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2016, operating hours: 5,613 h, total height: 2,350 mm, total length: 4,300 mm, total width: 1,880 mm, Colour: Grey Empty weight: 1.310 kg Credjzh Hkcopfx Aphed - Year: 2016 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: AB/226310 - Operating hours: 5613 - Main motor power [kW]: 5.5 - Number of controlled axes [pcs]: 1 - Working range X [mm]: 3050 - Working range Y [mm]: 900 - Working range Z [mm]: 60 - Number of milling spindles [pcs]: 1 - Tool holder interface: ISO30 - Max. spindle speed [rpm]: 18000 - Horizontal drilling unit: Yes - Horizontal drilling spindles [pcs]: 6 - Max. drilling depth [mm]: 35 - Vertical drilling unit: Yes - Vertical drilling spindles [pcs]: 12 - Max. drilling depth [mm]: 60 - Manual operation: Yes - Control: SCM Xilog - Software: Xilog Plus - Saw unit present: Yes - Safety feature: - Spindle speed control: Continuously adjustable - Transport dimensions: 4300mm x 1880mm x 2350mm (l x w x h) - Transport weight [kg]: 1310kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: excellent (used), Year of construction: 2012, Vernet Behringer HD-X 918 / HBP 410/923 CNC Sawing / Drilling Line – Year 2012. Split system. 3 Spindle. Automatic tool changer. Cjdpfjx Ruudsx Apherd 24 metres infeed. 18 metres outfeed. Gripper Feed measuring system. Infeed and outfeed Cross Transfers.

Year of construction: 2007, condition: like new (used), FICEP 601 DZB CNC DRILLING LINE with 4 way SCRIBING FACILITY I-Beams (without camber): Web height minimum 60mm maximum 610mm. Flange width minimum 30mm maximum 310mm. UNP Channels (web downwards): • Web height minimum 60mm maximum 610mm. Flange width minimum 30mm maximum 300mm. Angles • Flange height (unequal flanges as well) minimum 50 x 50 x 5mm maximum 250 x 250 x 40mm. Flats • Width minimum 100nn maximum 610mm. Codpfxeh N Taao Apherd Square tubes • Size minimum 60 x 60mm maximum 300 x 300mm. Rectangular tubes • Size minimum 60 x 30mm maximum 600 x 300mm. All beams • Maximum thickness that can be drilled 50mm. Maximum length (infeed) 12000mm.

Condition: excellent (used), Year of construction: 2012, Voortman V613 / VB1050 Split System CNC Drilling / Sawing Line – Year 2012. Crjdpfxsv U Ea He Aphjd Rotating Spindle. Automatic Tool changer. 24 metres In-Feed to VB1050. 24 metres Out-Feed to V613 CNC Drilling line. 24 metres Out-Feed. Roller Feed. VACAM CNC Control. Short piece removal.

Condition: good (used), Year of construction: 2007, DRILLING MACHINE Operating range V630/1000M Min. / max. height 10 – 450 mm Min. / max. width 60 – 1.050 mm Max. positioning weight 9.000 kg Number of drilling units 3x Automatic tool changer 3x (3x 5 positions) Height measuring Included Width measuring Included Machine weight 12.000 kg Roller feed measuring system Max. speed 42 m/min Min. infeed length 1.500 mm Drilling unit VD40 Feed and positioning servo-motors with servo-invertors Spindle rpm Stepless 100 – 2.500 rpm (servo-motors) Lubrication Internal by mist of air / oil Holder SK 40 Drill diameter oil-tube-drills 8 – 40 mm Drill diameter carbide drills 13 – 32 mm Thread tapping M8 – M24 Centre point marking possibility Yes, 3 sides SAWING MACHINE Sawing machine VB1050 Capacity (h x w) 0° 500 x 1.130 mm Capacity (h x w) +/- 15° 500 x 1.060 mm Capacity (h x w) +/- 30° 500 x 925 mm Capacity (h x w) +/- 45° 500 x 725 mm Crsdpfx Ajvpafysphsd Capacity (h x w) +/- 60° 500 x 470 mm Saw band speed stepless 40 – 120 m / min Saw drive motor 7,5 kW Saw band dimensions 9.550 x 54 x 1,6 mm Hydraulic band tension 48.000 N Machine weight +/- 8.500 kg

Condition: excellent (used), Year of construction: 2012, · V200 Plate drilling machine (executed with a VD40 drilling unit and an X-Y coordinate table). · VTC 8/40 tool changer (8 places). · Hydraulic numbering unit VN 1/16 Crsdpfx Ajwphgdsphjd · Deburring unit VDB 2 (each hole is automatically deburred). Max. length 1.400 mm* Max. width : 1.000 mm Min/max. thickness : 3 - 60 mm Capacity : : 600 kg * Longer lengths (max. 2 400mm) possible by automatic repositioning.

Condition: excellent (used), Year of construction: 2011, Ficep 1003 DZB CNC Drilling / Sawing Line – Year 2011. 3 Spindles. Automatic Tool Changer. Credpfjxmvnusx Aphod Scribing. Short Piece Removal. Hard Stamping. Gripper feed. Infeed and Outfeed Cross Transfers. 1000mm Section Capacity.

Condition: excellent (used), Year of construction: 2019, HD-SFVO 412-S HBE 320/523 G- YEAR 2019. Marking-drilling-milling-shearing & sawing line HD-SFVO 412-S DRILLING CAPACITY. Flat bars: 50x10 to 400x30 Angles: 50x50x5 to 250x250x20 IPN-IPE: 80 to 400 HEA-HEB: 100 to 400 UPN-UPE: 80 to 400 Square and rectangular tubes: 50x50 to 300x300x20 HBE 320/523 G SAWING MACHINE. Effective cross-section (mm): 90°: 400x300 Bevel cut, left pivot (W x H, mm): 75°: 400x300 60°: 400x300 45°: 330x300 30°: 200x300 Bevel cut, right pivot (W x H, mm): 75°: 400x300 60°: 400x300 45°: 310x300 Power supply: • Three-phase 400V ± 15 V + ground, 50Hz • Installed power: 40 kVA Compressed air: • Minimum pressure: 6 bar • Maximum flow rate: 3 Nm³/h Operating temperatures: • From 10°C to 40°C Milling unit specially designed for machining small square or rectangular tubes (slotted holes, shaped cuts, etc.). With the engraving equipment: ability to engrave letters or numbers for part identification. Allows, among other things, marking of tubes with sufficient depth to ensure legibility after painting or galvanizing Secure holding of the bar during milling: the bar is clamped in the movable vice system to ensure proper machining while minimizing vibrations. Improved positional tolerance of one hole relative to another within a group of holes (within a maximum length of 150 mm) Additional features Cycle for centre punching, countersinking, tapping, deburring, and chip breaking Automatic measurement of tool length (HSS) Side and centre tool cooling 230-ton shear Feature Mobile hydraulic shear Straight cut Average cutting time: approximately 2 to 2.5 seconds Crodey R Tk Ropfx Aphjd Capacities: HEB 140 IPE 300 IPN 280 Angle bars 150x150x18 L 200x100x14 UPE 300 UPN/UPAF 300 Flat bars 300x20

Year of construction: 2007, condition: good (used), Danobat CNC Drilling / Sawing Line – Year 2007 Single Rotating Spindle. 18 metres In- Feed Rollers. 12 metres Out- Feed Rollers. Pincher Unit Feed. Cedpfx Ajig T Amjphsrd Infeed Cross Transfers. Outfeed Cross Transfers. 750mm Capacity. Sawing Capacity: Round cutting capacity(without vertical jaws, angle 0 degrees) 520 mm. Rectangular cutting capacity (without vertical jaw, angle 0 degrees) 700mm X 500 mm. Maximum capacity with vertical jaws 700 X 500 mm. Round cut capacity with 45 degree turn, 450 mm. Rectangular cutting capacity with 45 degree turn, 450 X 500 mm.

Condition: excellent (used), Year of construction: 2009, Year 2009 VOORTMAN V600 CNC SINGLE SPINDLE DRILLING MACHINE with 5 station automatic tool changer. 18 metres length, drilling capability 16.3 metres. Profile Capacity 35mm -1050mm. Drill capacity 8mm-40mm. Cedpfx Ajw D Uqfephjrd

Condition: used, Year of construction: 2006, Web height min 80mm. max 1220mm. Flanges height min 42mm.max. 600mm. U channels min. 80mm 1200mm Flanges height min.45mm max 300mm. Angles min. 80x80x8mm max.300x300x50mm Flats min.100mm max.1220mm Square tubes min.80x80mm max.600x600mm Rectangular tubes min. 80x40mm max.1200x600mm Positioning weight max. 15000Kg Linear weight of the section to be handled max. 750Kg/m Carriage speed max. 30m/min. No. of drill heads 3 - two horizontal Drill Heads with single spindle - one vertical Drill Head with single spindle Max. drilling diameter 50 mm. - with tapered adaptor No.4 Max. thickness that can be drilled 75 mm. Credpfox N Iclex Aphed Spindle rotation motor per head (a.c.) 15 kW Spindle R.P.M. (with continuous adjustment by program) RPM 180 - 3000 Positioning stroke to suit the gauge line :- vertical drilling unit 20 to 1200 mm.- horizontal drilling units 10 to 600 mm. TOOL CHANGE - number of tools change devices n. 3 - number of tools to be changed n. 6 - adaptor size ISO 45 Model 1260 BH for sections cold sawing : - sawing capacity at 90° min. 80 x 10 mm - sawing capacity at 90° 1250 x 600 mm - sawing capacity at 45° 800 x 600 mm - sawing capacity at 60° 500 x 500 mm - sawing band motor 11 kW - sawing speed 20÷100 m/min. - band size 67 x 1.6

Condition: excellent (used), Year of construction: 2013, Vernet HD-X 618 / HBP 410/723 G CNC Drilling / Sawing Line – Year 2013. 3 Spindle Drill. 16.5 metres In-Feed. 14 metres Out-Feed. Pusher Unit Feed. Milling / Slotting. Solid Carbide Tooling. Small parts conveyor. 4 way Scribing. Crjdpfsx Rut Tex Aphod In-Feed Cross Transfers. Out-Feed Cross Transfers.

Year of construction: 2010, condition: good (used), Main Technical Specifications Profiles to be processed • Max. section volume mm 1100 x 1100 • Bar length max. metres 12 Drilling Capacity Codpfx Apjig T Axohjrd • Drill heads no. 1 • Spindles per vertical drill head no. 1 • Drilling diameter max. mm 31.75 • Drilling diameter (with reduced feed) max. mm 40 • Power per head (a.c.) kW 5,5 • Program controlled spindle rotation speed with continuous variation RPM 180 - 1000 Other Specifications • X axis positioning speed (portal) mt/min. 20 • Y axis positioning speed (drill head) mt/min. 4

Year of construction: 2007, condition: good (used), ■ V600 Drilling machine (moveable drilling cabinet, executed with 1 horizontal drilling unit and automatic tool changer) Crodpfxsq Hgg Ue Aphed ■ Drilling table with power rail length 15 metres, effective length 12 metres ■ Hardware and software (includes VACON 110 machine control) ■ Safety devices (safety bumpers) ■ Year of construction 2007

Condition: used, functionality: fully functional, Year of construction: 2008, Peddinghaus FDB 1000/3 – CNC Plate Drilling & Profiling System– Year 2008 Credpfx Ajy E N Hdsphod 6 metres x 1 metres Capacity. Maximum workpiece width 1000 mm. Maximum workpiece thickness 50 mm. 3 x drilling spindles. Maximum drilling diameter 40 mm. Oxy‐Fuel. Hypertherm Plasma. Kemper Extraction Unit

Condition: used, total width: 1,000 mm, total length: 2,200 mm, total height: 2,500 mm, Empty weight: 2.500 kg Cedpfjwnilxox Aphjrd - Documentation available: No - CE certificate present: No - Drive system: Conventional - Power [kW]: 6 - Y-axis travel [mm]: 1000 - Table length [mm]: 1300 - Table width [mm]: 600 - Drilling depth [mm]: 150 - Drilling capacity [mm]: 32 - Max. Reach [mm]: 1000 - Min. spindle speed [rpm]: 30 - Max. spindle speed [rpm]: 2650 - Transport dimensions: 2200mm x 1000mm x 2500mm (l x w x h) - Transport weight [kg]: 2500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, mileage: 81,000 km, power: 100 kW (135.96 HP), first registration: 01/2010, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 6,000 mm, loading space length: 3,300 mm, Equipment: ABS, central locking, soot filter, Chat with us now via WhatsApp: Quick & easy contact with our sales consultant. Attention! Priority sales to commercial customers! Internal ID Number: [3184] ----Optional available: * 12–64 months warranty (valid throughout the EU) * New inspection * New TÜV & emissions test (AU) * Nationwide delivery * Financing available with zero down payment * Towbar retrofitting available on request * Spring offer: On request and for an additional charge of only €999, the towing capacity can be increased to up to 3,500 kg (vehicle- and manufacturer-dependent). ----Vehicle highlights: Credjza Rbwjpfx Aphed * 1 owner * German vehicle * Ready for immediate use * Euro 5 standard * Long wheelbase * Towbar * 2x sliding doors * Roof rack * 3 seats Special equipment: Storage compartments: luggage net on rear wing door, rear wing doors with windows, partition wall with window for the cargo area, sliding door on left side (cargo/passenger compartment), upholstery: artificial leather, cabin seats: twin passenger seat Further equipment: Storage options: shallow tray/compartment above windscreen, driver's airbag, traction control (ASR), entry grip on rear right pillar, driver assistance system: brake assist (HBA), body/chassis: standard panel van, body variant: standard roof, fuel tank: 75L, engine: 2.5L - 100 kW TDI DPF, parking light function, wheelbase 3665 mm, tyre repair kit, low-emission as per Euro 5, sliding door right (cargo/passenger compartment), cabin seats: adjustable driver's seat, GVW 3,000 kg, additional brake light ----Interested in leasing or financing? We offer attractive terms—even with no down payment! Feel free to contact us. Contact: Phone: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln, Germany Opening hours: Mon–Fri: 9:00–18:00 Sat: 9:00–14:00 ----Note: All information provided online is non-binding and serves only as a general description of the vehicle. Errors, typographical mistakes, and prior sale reserved. The binding quality of the vehicle results solely from the purchase contract on site or from written assurances. Vehicles with a mileage over 50,000 km or older than 3 years are preferably sold to our business customers.

Condition: excellent (used), Stäubli Industrial Robot TX60 with CS8C-TX60 Controller – 6-Axis Robotic Arm For sale is a pre-owned Stäubli TX60 industrial robot, including the CS8C-TX60 control unit. The robot is ideally suited for precise handling, assembly, or inspection tasks in automation technology. Technical Data – Robotic Arm TX60 Axes: 6 Max. load capacity: 4.5 kg (up to 9 kg possible) Reach: 670 mm Repeatability: ± 0.02 mm Mounting: Floor, wall, or ceiling Protection rating: IP65 (optional IP67 at wrist) Robot weight: approx. 51.4 kg CS8C-TX60 Controller Power supply: 1X230V-50/60Hz, 1700 VA, 120 kA Compact 19" controller with VAL3 control system Communication via Ethernet / RS232 / fieldbus (optional) Digital inputs/outputs and expansion options Protection rating: IP20 (optional IP54) Dimensions: approx. 331 × 445 × 455 mm Controller weight: 31 kg Scope of Delivery Stäubli TX60 robotic arm CS8C-TX60 controller Connection cables (robot–controller) Teach pendant, handheld programming device Condition: used Scope of delivery: (see picture) Csdpfx Apoziaayohjrd (Subject to changes and errors in the technical data and details!) We are happy to answer any further questions by phone.