Used Handling Systems for sale (43,859)

Condition: used, Year of construction: 2001, Thermo-lamination system Iiedpfx Abezuzt Sepof Manufacturer: BÜRKLE Type: FFAII 1300 Year of manufacture: 2001 Technical data: Working width: 1300 mm Panel dimensions Width: 200 - 1300 mm Length: 400 - 3000 mm Thickness: 8 - 40 +/- 0.2 mm Film dimensions Width max. 1320 mm (lateral overhang up to 20 mm) Roll diameter 76 or 152 mm (3" or 6") Working height above floor: 940 mm System speed: 15 - 45 m/min Three-phase drive with vector control Operating side: right Panel feed: centered System configuration FFAII 1300 - Brush machine DBM (chain brushes) - Preheating and smoothing calender GKL, D = 500 mm - Thermo-oiler heater 36 kW - Hardener application machine DAH + complete hardener circulation system with monitoring - Transport section + IR zones with temperature sensors - Adhesive application machine DAK + automatic level sensing - Cooling unit for DOW cooling - Adhesive supply - Conical transport section TKE - Lamination calender EKM, D = 500 mm + film unwinding station + separating station + belt transport section with operator platform for FVE - Expansion shafts - Smoothing calender GKL, D = 500 mm at the inlet of the conveyor belt - Thermo-oiler heater 96 kW for lamination calender and smoothing calender - Central control cabinet - I.S.E. Optimat ISL 111 (year of manufacture 2004) Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2021, Painting system for edge surfaces Manufacturer: WIKOMA Painting of narrow edge surfaces Commissioned: 2021 Intended use: Spraying the edges of furniture panels arranged in stacks. Scope of delivery: - 2 spray booths - 2 hot air drying tunnels - 1 sanding booth - Chain conveyor Iedjzuztxepfx Abpsif - Control cabinet The system was in operation until the end of June 2025. Note: The technical data and descriptions are a transcript of the order confirmation from that time. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2009, Painting system The system consists of: SORBINI Smartcoater SP1 paint roller coating machine, year of manufacture 2009, approximately 3000 operating hours Roller coating and puttying machine Technical data - Working speed: 5-20 m/min - Workpiece width: max. 1350 mm - Workpiece thickness: max. 100 mm Isdszuzrhjpfx Abpjif UV lamp control cabinet UV lamps SUPERFICI Model 2UVPLUS65, year of manufacture 1998, on a VENJAKOB conveyor belt, year of manufacture 1998, average number of operating hours 8500 Working area 1.5 - 7.5 m/min. Max. element width 1300 mm Dimensions (length x width) Lamps with conveyor belt: 5100 mm x 1700 mm (+ 600 mm motors) Rollers: 2200 mm x 2900 mm Control cabinet for UV lamp: 2000 mm x 800 mm Note: The technical data and descriptions are a copy of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 1990, Paint/coating application system Manufacturer: Bürkle Type: DAL 1 1300 Ijdpfx Abezuzqdepsif Year of manufacture: 1990 Note: The technical data and descriptions are transcriptions from the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, mileage: 597,614 km, power: 340 kW (462.27 HP), first registration: 12/2008, fuel type: diesel, axle configuration: 8x4, wheelbase: 6,100 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro5, number of seats: 2, total length: 8,600 mm, total width: 2,500 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 11,500 kg, Year of construction: 2008, Technical information Number of cylinders: 6 Iijdpfxszux Ero Abpof Engine capacity: 12.902 cc Axle configuration Front axle 1: Max. axle load: 9000 kg Front axle 2: Max. axle load: 9000 kg Rear axle 1: Max. axle load: 11500 kg Rear axle 2: Max. axle load: 11500 kg Weights Empty weight: 14.160 kg Carrying capacity: 27.020 kg GVW: 41.000 kg Max. towing weight: 50.000 kg Maintenance APK (MOT): tested until 09/2026 Identification Registration number: BV-RF-67

Condition: used, Year of construction: 1998, - Lengths: 1,800 - 2,300 mm - Widths: 500 - 1,300 mm - Thicknesses: 35 / 40 / 44 mm Door pressing system Manufacturer: Wild Year of manufacture: 1998 For door dimensions: - Lengths: 1,800 - 2,300 mm - Widths: 500 - 1,300 mm - Thicknesses: 35 / 40 / 44 mm Consisting of the following sections: 1. Continuous door panel gluing with frame assembly station / 2. Pressing line with hardboard facing station Section 1 consists of: - Gantry loading system - Angle transfer with longitudinal and cross saws - Loading and feeding of the longitudinal and transverse frame parts from magazines - Longitudinal cutting station for the longitudinal frame parts - Connecting station of the frame parts with the door panel core. With clamping devices - Conveyor belt angle transfer with shuttle transfer of the door panel cores onto the glued hardboard Section 2 consists of: - Loading of the hardboard - Brush cleaning machine - Hardener application machine from below - Glue application machine from below - Roller conveyor - Angle transfer for the lower hardboard - Vacuum reversing device for the upper hardboard - Automatic facing station for hardboard and door panel cores Iisdszuzgrspfx Abpef - 2 door presses, each with 2 x 4 pressing stations, arranged parallel to each other - Both presses are loaded at the infeed with 1 shuttle loading basket - Both presses are unloaded at the outfeed with 1 shuttle unloading basket - Angle transfer to the infeed into a hedgehog buffer - Angle transfer at the outfeed of the hedgehog buffer and feeding to the stacking station - One-sided vacuum stacking with protective plate space Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2020, - Feed - Cutting - Cleaning - Infrared heating - UV curing - Coating - Digital printing - Structuring - Excimer matting - Stacking Digital printing system Manufacturer: Hymmen Type: JUPITER - JPT C 680/548 with OFS 850 Year of manufacture: 2020 Technical data - Nominal width: 680 mm - Maximum printing width: 548 mm (expandable to 680 mm) - Maximum panel width in the OFS: 510 mm - Working height: 900 mm (+50 mm) Iiedpfx Aezuzfzsbpjf - Processing: Printing and top coating from above, back coating from below - Operating mode: two-lane up to a max. part width of 255 mm; otherwise single-lane - System speed: 8-65 m/min - Printing speed: up to 50 m/min Jupiter digital printing unit (JPT): - Number of colors: 4 - Print heads per color: 8 (max. 10 possible) - Free slots for additional colors: 6 - Print head type: XAAR 2001 Printing unit with DLE structure: - Printing rows: 1 - Print heads per row: 8 (max. 10 possible) - Free slots for additional rows: 1 - Total print heads: 8 - Print head type: XAAR 1003 Specifications of the raw panel: - Length: 600-2800 mm - Width of the raw board before the longitudinal cutting process: 900-1260 mm - The panels are split in the longitudinal direction before digital printing and coating - Thickness: 2-12 mm (without limitations); up to 28 mm with speed limitation Cutting format saw: - Longitudinal slitting system with up to 5 saw cuts plus 2 trimming units for the production of finished panel widths of 160-510 mm Specifications for finished panels: - Length: 600-2800 mm - Width: 160-510 mm - Thickness: 2-12 mm (without limitations); up to 28 mm with speed limitation Feed system (feed): - Type: Vacuum portal - Feed stations: 2 - Discharge stations: 1 - Maximum feed rate: 8 cycles/min; with double stacking: 16 panels/min - Identical stacks per station: up to a panel length of 1550 mm = 2; =1550 mm = 1 - Maximum stack height: 1050 mm - Maximum stack weight: 5000 kg (combined) - Design: without pits - Type of transport: protective plate or pallet - Protective plate (infeed): Length 800-2800 mm; Width 1000-1260 mm; Thickness 20-30 mm (up to 150 mm for pallets); max. 80 kg per panel/pallet Stacking system (outfeed): - Type: Drop shaft - Stack positions: 1 - Maximum stacking rate: 30 cycles/min - Identical stacks per position: up to a panel length of 1550 mm = 2; =1550 mm = 1 - Maximum stack height: 1050 mm (alternatively: 1000 mm) - Maximum stack weight: 5000 kg (combined) / Alternative stack configuration maximum stack weight: 3500 kg - Design: with pits - Type of transport: protective plate or pallet - Type of protective plate feed: loading by forklift, separation by robot - Protective plate (stacking): Length 800-2800 mm; Width 1000-1200 mm; Thickness 20-30 mm; max 80 kg per panel; Material OSB or HDF Units: - Number of units: 35 - Process steps: Feed, cutting, cleaning, infrared heating, UV curing, coating, digital printing, structuring, excimer matting, stacking Application: - Industrial single-pass digital printing line for the high-speed surface finishing of large panels (flooring and furniture), which creates realistic wood, stone, or custom decors directly onto substrates. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2021, - Working width 1,350 mm - Belt feed speed 2 to 16 m/min - PRO SAND electronic control Automatically Calibrating Sanding Machine Manufacturer: SCM Type: DMC system Year of manufacture: 2021 Technical data - Working width 1,350 mm - Belt feed speed 2 to 16 m/min - PRO SAND electronic control - PLC terminal with 10.4" LCD color display Unit 1 TIE 5000 working unit for additional table, internal cross-padding - Sequencing system of the unit for belt change by only one machine operator - Automatic brake - Linear blower with timed activation for belt cleaning - Belt dimensions: 150 x 5,000 mm - Chevron belt dimensions: 140 x 4,710 mm PE16T EPICS electronic sector sanding, pitch 16 mm - 16 mm distance between sectors from center to center - Double-acting pneumatic cylinders with adjustable feed/counter feed - Graphite cloth with quick extraction device - Complete management of functions via the electronic Pro Sand control - Motor with inverter power up to 15 kW Unit 2 DO19 orbital unit for 19 rotating disc brushes - Manual adjustment of the unit's working position - 1.1 kW main motor with inverter drive - Independent motor for controlling the orbital movement - Diameter of the rotating disc: 125 mm FT/19/125 Set with 19 rotating discs, diameter 125 mm Unit 3 BF300 working unit for brush roller, diameter 300 mm - Manual adjustment of the roller's working position Iedpfjzuzbcex Abpsif - 4 kW main motor with inverter drive FT 300 brush roller, diameter 300 mm Unit 4 BF300 working unit for brush roller, diameter 300 mm - Manual adjustment of the roller's working position - 4 kW main motor with inverter drive FT 300 brush roller, diameter 300 mm Unit 5 SC 2620 working unit for super finish pad - Rotation of the belt in the opposite direction of the conveyor belt - Electronic belt swiveling control - Disc brake - Chevron belt dimensions: 1,370 x 2,186 mm - Belt dimensions: 1,370 x 2,620 mm PE16/C EPICS electronic sanding block with sector pitch 16 mm - 16 mm distance between sectors from center to center - Double-acting pneumatic cylinders with adjustable feed/counter feed - Graphite cloth with quick extraction device - Complete management of functions via the electronic Pro Sand control - Inverter motor with a power of up to 15 kW Inverter-controlled vacuum motor integrated into the machine frame, up to 7.5 kW - Rubber-coated conveyor belt, 50 Shore - 4 kW conveyor belt motor with inverter drive Console with integrated PC eye-M and electronic Maestro Pro Sand control with tele service system Device connected to the machine that enables the use of the Maestro Pro Sand software. The integrated LED light strip enables the operator to monitor the machine's status in real time (emergency, operation, etc.) without having to be near the machine itself. It is equipped with a fanless industrial PC with protection class IP53 (IP65 on the front). This robust solution guarantees the highest level of resistance even under the most adverse environmental conditions that an industrial site can offer. The 21.5" LCD color display with a large 16/9 touchscreen enables particularly easy and efficient control of the machine's most important functions: - Full HD display resolution 1920x1080 - LED backlight - Capacitive

Condition: used, Year of construction: 2005, - Automatic infeed table - KFA unit - Return system Used single-sided edge banding machine Manufacturer: IMA Type: Combima Systems / I/R751220/R3 1 single-sided combination machine for trimming, edge gluing and edge finishing of panel-shaped workpieces made of wood and/or wood-based materials. - Automatic infeed table - KFA unit - Return system Technical data "Workpiece": Workpiece length - min.: 238 mm - max.: 2350 mm Workpiece width - min.: 142 mm - max.: 800 mm Workpiece thickness: - min.: 8 - 40 mm Technical data "Strip" (only for longitudinal processing): Roll material: - Paper edge bands & plastic edge bands: 0.3 - 3.0 mm - Veneer edge bands: 0.5 - 3.0 mm Edge height: - min.: 14 mm - max.: 45 mm Technical data "Machine": Variable workpiece overhang from the chain conveyor (including edge with edge thickness 0.3-3 mm): - min.: 40 mm - max.: 80 mm - PC control ICOS open - Feed speed v=5-25 m/min, frequency-controlled drive - Inclined roller table as infeed section NC infeed system for front and carcass parts - for length and width-independent automatic workpiece feed in single-sided edge processing machines. Only for the production of strip material in the 2nd pass - An additional stop rail, adjustable via NC axis. Double milling unit 08.376: - Controllable - Motor 1 operating in the same direction and motor 2 operating in the opposite direction - Reserve space on the unit carrier for a double trimming unit with electrical pre-installation for 2 x 6.6 kW. - Heater 300 lg, 2x1.5 kW, for preheating the workpiece edge. - Gluing unit 04.1570 system for straight edges and adhesive application to the workpiece. The edge thickness depends on the magazine used and is max. 3 mm. - Adhesive application for workpiece thickness max. 50 mm - 2 pre-melting tanks for PU adhesive - 12-position edge magazine for roll material 0.3-3 mm thick. (8 slots up to 3 mm, 4 slots up to 1.3 mm) Vertical roll holder for 12 rolls: - max. roll diameter 850 mm - max. edge height 45 mm - Trimming unit 08.42, for 2 motors mounted on the upper pressure bar - Pre-milling and milling unit with height sensor - with 1 motor 1000 W - Multi-profile / chamfer unit, with 2 motors 1000 W - Contour milling unit KFA 30 - Multi-profile drawing blade unit - Flat drawing blade 08.517 - Copy edging unit 08.604 - Edging unit 08.617-2 - Double milling stand 75.184, 1050 mm high, both stand sides can be used - Milling / profile milling / grooving unit 75.34 with 1 motor, without tool, 100 Hz, 6000 rpm - Milling / profile milling / grooving unit 75.34 with 1 motor, without tool, 100 Hz, 600 rpm - Motor spindle for the use of the Hydro-Format tool system Iisdpozuyplefx Abpsf - Return system, manufacturer Meinert Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 1985, Folding system Note: The system has been refurbished and received a new control system in 2013! Folding system consisting of: Lifting table with pusher Roller conveyor Infeed Transfer system and workpiece pre-cleaning Double-end profiler Manufacturer: Homag Type: FG63 Year of manufacture: 1985 Technical data - with adhesive strip application - Machine for profiling and folding the edge strips - Milling station on both sides - Control system: Siemens Simatic Touch - Glue application unit - Folding unit for folding the pre-folded workpieces - Sliding shoe for pressing - Extraction table for material removal Electric scissor lift table Manufacturer: Altek Ijdpfozuynzjx Abpoif Year of manufacture: 2014 Technical data - Load capacity max. 1000 kg - with attached roller conveyor - Dimensions approx. 3100 x 1000 mm - with height measuring device for automatic detection of stack height and corresponding cycle time Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, emission class: euro6, Year of construction: 2014, Year of manufacture: 2014 Price: On request Iedpfxszc Ib He Abpjif

Condition: used, Year of construction: 2005, Single-sided edge banding machine Manufacturer: IMA Type: Novimat Systems/I/R75/1000 Year of manufacture: 2005 Iedpfx Ajzuyhnebpsif Technical data PC control - ICOS OPEN control system Feed rate 5-25 m/min, frequency-controlled Fence with electronic positioning control Adhesive application above and below Trimming unit with 2 motors, each 4.5 kW, 9,000 rpm, controllable. - Horizontally adjustable via axis Heating element approx. 300 mm long, 2x 1.5 kW Gluing unit - Adhesive application with pneumatic quick-lock system. - Automatic PU melting system Quickmelt for 2 kg cartridges - 32-position edge magazine (8 slots up to 3 mm / 24 slots up to 1.3 mm) Vertical roller holder for 32 rollers, max. diameter 850 mm Cutting unit on the upper pressure roller with 2 motors, each 200 W, 400 V, 12000 rpm. - Horizontal pneumatic swiveling 0-25 - With controllable side contact, for 3 edge thicknesses Trimming unit with 2 motors, each 1000 W, 400 V, 200 Hz, 12000 rpm. - Operating in counter-rotation. Multi-processing unit 08.348 - For chamfering or radius trimming of the upper and lower longitudinal edges, as well as for copying the front and rear workpiece edges. - Program-controlled adjustment for up to 4 profiles - 2 motors, each 660 W, 400 V, 200 Hz, 12000 rpm. Spray nozzles above and below for applying cleaning agents Multi-profile scraper unit - With stepper motor axes for horizontal and vertical positioning. - For 4 profiles. Straight scraper unit - With electro-pneumatic retraction device Copying edge smoothing unit - With 4 smoothing motors, each 250 W - Smoothing unit with 2 lower and 2 upper motors, each 180 W, 50 Hz, 1400 rpm. Smoothing unit - For smoothing and eliminating the white haze on the trimmed PVC/ABS edges - With an upper and lower smoothing zone With workpiece return system LGIMATECH ZHR 05/L/145 - Air cushion table, inclined, 2 return belts with brushing devices from below. Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: good (used), mileage: 906,455 km, power: 341 kW (463.63 HP), first registration: 09/2012, fuel type: diesel, tire size: 445 / 65 / R22.5, axle configuration: 8x6, wheelbase: 6,150 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 16, emission class: euro5, suspension: other, number of seats: 2, total length: 8,760 mm, total width: 2,550 mm, total height: 3,700 mm, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 11,500 kg, Year of construction: 2012, Equipment: ABS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, power mirror, spoiler, trailer coupling, Technical information Number of cylinders: 6 Engine capacity: 12.902 cc Transmission Transmission: ZF, 16 gears, Automatic Iiodpfx Aszuy Uzobpef Axle configuration Make axles: Ginaf Brakes: drum brakes Front axle: Tyre size: 445 / 65 / R22.5; Max. axle load: 10000 kg; Steering; Tyre profile left: 75%; Tyre profile right: 75%; Suspension: leaf suspension Rear axle 1: Tyre size: 445 / 65 / R22.5; Differential lock; Lift axle; Max. axle load: 10000 kg; Steering; Tyre profile left: 40%; Tyre profile right: 40%; Reduction: hub reduction; Suspension: hydraulic suspension Rear axle 2: Tyre size: 13 R22.5; Double wheels; Differential lock; Max. axle load: 11500 kg; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30%; Reduction: hub reduction; Suspension: hydraulic suspension Rear axle 3: Tyre size: 13 R22.5; Double wheels; Differential lock; Max. axle load: 11500 kg; Steering; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30%; Reduction: hub reduction; Suspension: hydraulic suspension Weights Empty weight: 15.815 kg Carrying capacity: 27.185 kg GVW: 43.000 kg Functional Crane: VDL S-30-6600, year of manufacture 2012, behind the cab Interior Interior: grey Maintenance APK (MOT): tested until 10/2026 Condition Technical condition: good Visual appearance: good Number of keys: 2 Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL = Additional options and accessories = - 12 volt socket - Air horn - Armrest - Coupling - Heavy duty engine brake - Hydraulic - Low-noise - Power take-off (PTO) - Radio, MP3 enabled - Radio/CD player - Remote central locking - Reversing camera - Speed limiter - Spoilers - Stability control - Toolbox - Visor

Condition: good (used), mileage: 906,455 km, power: 341 kW (463.63 HP), first registration: 09/2012, fuel type: diesel, tire size: 445 / 65 / R22.5, axle configuration: 8x6, wheelbase: 6,150 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 16, emission class: euro5, suspension: other, number of seats: 2, total length: 8,760 mm, total width: 2,550 mm, total height: 3,700 mm, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 11,500 kg, Year of construction: 2012, Equipment: ABS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, power mirror, spoiler, trailer coupling, Technical information Number of cylinders: 6 Engine capacity: 12.902 cc Iijdpfxozuy Uuo Abpof Transmission Transmission: ZF, 16 gears, Automatic Axle configuration Make axles: Ginaf Brakes: drum brakes Front axle: Tyre size: 445 / 65 / R22.5; Max. axle load: 10000 kg; Steering; Tyre profile left: 75%; Tyre profile right: 75%; Suspension: leaf suspension Rear axle 1: Tyre size: 445 / 65 / R22.5; Differential lock; Lift axle; Max. axle load: 10000 kg; Steering; Tyre profile left: 40%; Tyre profile right: 40%; Reduction: hub reduction; Suspension: hydraulic suspension Rear axle 2: Tyre size: 13 R22.5; Double wheels; Differential lock; Max. axle load: 11500 kg; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30%; Reduction: hub reduction; Suspension: hydraulic suspension Rear axle 3: Tyre size: 13 R22.5; Double wheels; Differential lock; Max. axle load: 11500 kg; Steering; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30%; Reduction: hub reduction; Suspension: hydraulic suspension Weights Empty weight: 15.815 kg Carrying capacity: 27.185 kg GVW: 43.000 kg Functional Crane: VDL S-30-6600, year of manufacture 2012, behind the cab Interior Interior: grey Maintenance APK (MOT): tested until 10/2026 Condition Technical condition: good Visual appearance: good Number of keys: 2 Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL = Additional options and accessories = - 12 volt socket - Air horn - Armrest - Coupling - Heavy duty engine brake - Hydraulic - Low-noise - Power take-off (PTO) - Radio, MP3 enabled - Radio/CD player - Remote central locking - Reversing camera - Speed limiter - Spoilers - Stability control - Toolbox - Visor

Year of construction: 2003, condition: used, Colour: Cream Empty weight: 1.000 kg Dimensions (LxBxH): 130 x 140 x 290 cm - Year: 2003 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Capacity [m³/h]: 9000 - Main fan [pcs]: 1 - Main fan power [kW]: 7.5 - Connection diameter [mm]: 400 - Number of connections [pcs]: 1 - Options: Collection container, Control cabinet - Transport dimensions: 1300mm x 1400mm x 2900mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Isdpfx Aboztbwhjpsif VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 2003, condition: used, Colour: Beige Empty weight: 1.000 kg Dimensions (LxBxH): 130 x 310 x 290 cm - Year: 2003 Iodpfx Aozta Acobpjif - Documentation available: No - CE marking present: Yes - CE certificate present: No - Capacity [m³/h]: 9000 - Main fan [pcs]: 1 - Main fan power [kW]: 7.5 - Options: Welding fume extraction, Control cabinet - Transport dimensions: 1300mm x 3100mm x 2900mm (l x w x h) - Transport weight [kg]: 1000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, axle configuration: 2 axles, first registration: 06/2007, suspension: air, tire size: 275/80R22.5, wheelbase: 1,350 mm, Year of construction: 2007, Mileage: 266.502 km Isdpfx Aozul Hpsbpeif Tyre size: 275/80R22.5 Suspension: air suspension Rear axle 1: Double wheels Rear axle 2: Double wheels Drive: Wheel Empty weight: 4.380 kg Carrying capacity: 27.120 kg GVW: 31.500 kg

Condition: used, axle configuration: 2 axles, first registration: 04/2009, suspension: air, tire size: 275/80R22,5, wheelbase: 1,350 mm, Year of construction: 2009, Mileage: 219.497 km Tyre size: 275/80R22,5 Suspension: air suspension Rear axle 1: Double wheels Rear axle 2: Double wheels Drive: Wheel Empty weight: 4.620 kg Isdpfxjzul His Abpoif Carrying capacity: 26.880 kg GVW: 31.500 kg

Condition: used, axle configuration: 2 axles, first registration: 07/2010, suspension: air, tire size: 275/80R22.5, wheelbase: 1,350 mm, Year of construction: 2010, Mileage: 229.500 km Tyre size: 275/80R22.5 Suspension: air suspension Rear axle 1: Double wheels Rear axle 2: Double wheels Drive: Wheel Empty weight: 4.620 kg Iiedpezul Hcefx Abpsf Carrying capacity: 26.880 kg GVW: 31.500 kg

Condition: used, axle configuration: 2 axles, first registration: 08/2006, suspension: air, tire size: 275/80/r22,5, wheelbase: 1,350 mm, Year of construction: 2006, Mileage: 294.464 km Tyre size: 275/80/r22,5 Iisdpszul E Sjfx Abpef Suspension: air suspension Rear axle 1: Double wheels Rear axle 2: Double wheels Drive: Wheel Empty weight: 4.380 kg Carrying capacity: 27.620 kg GVW: 32.000 kg

Condition: new, JLT Clamp Rack Systems For Solid Wood Edge & Face Laminating Iodpfxsb Evnkj Abpoif A rugged and versatile clamping system specifically designed for solid wood edge and face laminating of both hard woods and softwoods. Available in two standard sizes, the Clamp Rack (or Panel Clamp) is ideal for the production of components such as panels, joinery sections, stair components,worktops, block gluings, and table tops etc. Frames can also be clamped. The patented equalizer clamp arms incorporate a number of important features not found on other types of mechanical clamp that help ensure a quality glue joint is produced. They can be positioned anywhere on the frame being easily moved from side to side / row to row. When not in use they can be hung vertically from a top support bar thus saving valuable workshop space. For face laminating material up to 150mm (6") in thickness optional rocker plates can be supplied which easily slide over the top and bottom clamp jaws thus evenly distributing the clamping pressure. When using the 401 type clamp and rocker plates material up to 200mm (8") can be laminated. Standard max. opening of the clamp arm is 1020mm (40") although larger sizes are available on request

Condition: excellent (used), mileage: 348,000 km, power: 302 kW (410.61 HP), first registration: 08/2015, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: retarder, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, Year of construction: 2015, Equipment: Bluetooth, central locking, crane, cruise control, electric window regulation, parking air conditioner, power mirror, retarder, seat heater, = Additional options and accessories = - 2-pedal control - Adaptive cruise control - Alarm system - Aluminum fuel tank - Heated mirrors - Brake booster - Remote central locking - Low noise - Air suspension - Radio/CD player - Reversing camera - Seat heating - Sun visor - Tool box - Central lubrication system = Notes = 8x4 tridem Euro 6 Retarder Roll-off tipper system: Palfinger T 22 (sliding and knuckle arm) System length: 6.25 m Foldable bumper Crane: PK 18002 EH B 3x hydraulic extension Radio remote control Iedpfx Ajzu Smpobpoif 5th and 6th control circuit Elevated platform 348,000 km In very good condition! Ready for immediate use = Further information = Front axle 1: Steered Rear axle 1: Lift axle; Steered Unladen weight: 17,100 kg Payload: 14,900 kg GVW: 32,000 kg Crane: Palfinger PK 18002-EH B, year of manufacture 2015, behind the cab Body manufacturer: Palfinger Technical condition: very good Visual condition: very good

Year of construction: 2018, condition: excellent (used), functionality: fully functional, power: 3.8 kW (5.17 HP), color: blue, construction height: 555 mm, load capacity: 2,000 kg, control voltage: 230 V, frame width: 2,240 mm, lifting speed: 53 mm/s, noise level: 70 dB, protection type (IP code): IP55, # OCS 500 Twin Track Conveyor and Assembly System with PRO-HUB Chain Hoist For sale is a comprehensive conveyor and assembly system from OCS Overhead Conveyor System AB, type OCS 500 (Twin Track), from project 2064 – Streetscooter Düren. The OCS 500 is a modular conveyor system designed for the transport of hanging trolleys. The trolleys can be moved manually or automatically within the system between different sections and workstations. The project-specific overall drawings show two assembly areas, designated as "Assembly Line 1" and "Assembly Line 2", as well as the transfer areas QVE1 and QVE2. The driven sections of the OCS system operate according to the friction principle. Friction wheels transfer the movement of a rotating drive tube to the trolleys. The drive tube is driven by V-belts and worm gear motors. The manufacturer specifies a normal operating speed of 12–20 m/min for the OCS-500 system. Manual sections are also possible within the system. The system includes chain hoists from PRO HUB Hebetechnik GmbH, designed for lifting passenger cars or commercial vehicles. The vehicle is supported via four lifting points. The lifting systems have pivoting and lockable lifting arms as well as a hydraulic safety device. Technical data of the PRO-HUB chain hoists: * maximum load capacity: 2,000 kg * lifting stroke: 2,600 mm, adjustable * lifting speed: 0.3–3.2 m/min, frequency-controlled * corresponding to approx. 5–53.3 mm/s * lifting time: approx. 59 s * lowering time: approx. 59 s * weight: approx. 3,200 kg * length of stationary frame: 4,710 mm * length of mobile frame: 4,670 mm * frame width: 2,240 mm * overall height: 555 mm without chain hoist * motor power: 3.8 kW * connection voltage: 400 V / 50 Hz * control voltage: 230 V * protection class: IP55 Ijdpozt Nnhjfx Abpsif * noise level: 70 dB(A) * year of manufacture: 2017/2018 The original documentation lists a STAHL CraneSystems ST5020-6/1.5 2/1 as the electric chain hoist. According to the PRO-HUB operating manual, the lifting and lowering movement is controlled via an HBC-radiomatic wireless remote control with dead man's function. The safety equipment of the chain hoists includes, among other things, main/emergency stop switches, gearbox limit switches, crane disconnecting switch, arm locking device, hydraulic holding/catching cylinders and maintenance chains. Extensive original documentation is available for the system and its components, including OCS operating instructions, overall and detail drawings, documents on conveyor technology and transfer cars, as well as the original operating manual for the PRO-HUB chain hoists and documentation on the control and safety components used.

Condition: good (used), mileage: 605,000 km, power: 331 kW (450.03 HP), first registration: 01/2015, fuel type: diesel, axle configuration: 8x4, wheelbase: 6,750 mm, fuel: diesel, color: white, gearing type: mechanical, number of gears: 12, emission class: euro6, number of seats: 2, total length: 9,500 mm, total width: 2,550 mm, Year of construction: 2015, Equipment: ABS, air conditioning, crane, electric window regulation, power mirror, trailer coupling, = Additional Options and Accessories = - Air-suspended seats - Radio/CD player - Rotating beacon - Rearview camera - Sun visor - Xenon headlights - Central lubrication system = Notes = 8x4 tridem chassis Euro 6 Liftable/steerable rear axle VDL S-25-6100 roll-off tipper system Container locking mechanism Palfinger Q170Z84TI crane 3 hydraulic extensions Remote control Elevated platform control Foldable rear bumper Valid TÜV (technical inspection) until 22.01.2027 In good condition! = Additional Information = Iiodpfx Aezu Ry Iobpef Technical Information Number of cylinders: 6 Engine displacement: 12,742 cc Front axle 1: Steered Rear axle 1: Lift axle; Steered Weights Unladen weight: 18,145 kg Payload: 18,855 kg GVW: 37,000 kg Functional Crane: Palfinger Q170Z84TI, year of manufacture 2015 Body manufacturer: VDL S-25-6100 Maintenance, History, and Condition APK (technical inspection): valid until 01.2027 Technical condition: good Optical condition: good Identification License plate: 90-BFN-7

Condition: excellent (used), mileage: 611,000 km, power: 324 kW (440.52 HP), first registration: 01/2015, fuel type: diesel, axle configuration: 8x4, wheelbase: 5,300 mm, fuel: diesel, brakes: engine braking, color: grey, driver cabin: day cab, gearing type: mechanical, number of gears: 16, emission class: euro6, suspension: steel, total length: 9,720 mm, total width: 2,500 mm, total height: 3,850 mm, Year of construction: 2015, Equipment: ABS, Bluetooth, air conditioning, central locking, crane, electric window regulation, fog lights, power mirror, seat heater, trailer coupling, = Other Options and Accessories = - Aluminium fuel tank - Heated mirrors - Leaf suspension - Brake booster - High beam - Air conditioning - Refrigerator - Air-suspended seats - Air horn - Radio/CD player - Rotating beacon Iodpezu Ryzofx Abpoif - Sliding sunroof - Seat heating - Sun visor - Toolbox - Xenon lighting - Towing hitch = Remarks = Vehicle with new engine, 0 km (invoice available) 8x4 Euro 6 Leaf suspension ZF 16-speed manual gearbox Palfinger T 20 roll-off tipper Palfinger crane PK 41002 EH E + Fly jib PJ 080 C 6x hydraulically extendable 4x hydraulically extendable Total working height: approx. 30 meters Hydraulic winch Radio remote control 4-point outrigger 5th and 6th function Belgian registration In very good condition! Ready for immediate use. = Further Information = Transmission Transmission: ZF, 16 speeds, manual gearbox Axle configuration Suspension: leaf springs Front axle 1: steering Front axle 2: steering Weights Unladen weight: 21,106 kg Payload: 10,894 kg Gross vehicle weight: 32,000 kg Functional Crane: Palfinger PK 41002-EH E + Fly jib PJ 080C, mounted behind the cab Body manufacturer: Palfinger Hooksystem T20 Condition Technical condition: very good Visual condition: very good Additional information For more information, please contact G. Damen or W. Schischke.