Used Heating Installation for sale (18,949)

Condition: as good as new (ex-display), Year of construction: 2023, pressing force: 120 t, table length: 600 mm, table width: 600 mm, Here are the technical data of the offered machine: Technical data + information: HB 2021-A-188, oil hydraulic double column press 120 T bottom piston heating press. - idle speed up to 40 mm/sec - Opening speed up to 40 mm/sec - Starting press speed 5-15 mm/sec - Table size/heating plate size 600 × 600 mm - ram size/heating plate size 600 × 600 mm - 2 heating plates, electrically heated, up to 250 degrees - as OPTION - total size approx. 2000 × 1000 × 2800 mm height - Oil temperature control - Automatic lubrication - Free positioning of the ram - SICK/LEUTZE light barriers 14,1 mm on front side - Circuit oil cooling - Pressure holding valve 0 to 1800 sec. - Rear monitored door - Pressure adjustment from 30 T to 120 T - Travel limitation either by pressure or position - Programming set-up mode, single stroke (adjustable via rotary switch) - Control panel permanently installed in cabinet wall - Two-hand operation - Machine body double painted - Signal light: red: alarm, yellow baking phase, green: ready - Heating plates with electric heating rods, up to max. 250 degrees - Assembly, commissioning, instruction against separate charge Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 1,600 kN Free ripping force max. 200 kN Pressure build-up time closed die steel to steel Max. 8 sec. Dimensions Max. Opening width per compartment 200 mm Stroke and min. opening per compartment 400/200 mm Table height above floor, without heating pl. 850 mm Height above floor (overall height) approx. 2.800 mm Hall height min. 3,500 mm Parallel deviation at 20 °C +/- 0.1 mm Deflection Determined at max. clamping force with 70 % occupancy ≤ 0.2 mm/m Total weight of the press without operating materials approx. 9 to Accessories: 4 HEATING PLATES 500 × 400 mm, max. heating capacity Equipped with temperature sensor 300 degrees Speeds Fast closing with 15 mm sec. Pressing speed 10 mm sec. Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 8 db(A) Number of pressing cylinders 1 pc. Operating pressure max. 240 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH gear pump approx. 48 L/min Oil volume approx. HLP 46 MW 300 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Automatic pressure readjustment after 5 % pressure loss Pressure stabilization for up to 1800 sec. Electrical system Main supply 400 V AC Control voltage Hydraulic pumps 24 V DC 24 V DC Frequency 50 Hz Connection hydraulic main motor 15 kW Hedpfx Aok S Dt Tscrsl Total connection approx. without heating plates 19 kW ##### If the press does not exactly meet your requirements, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Our great strength is special machine construction and press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: as good as new (ex-display), Year of construction: 2011, Used storage tank made of steel according to EN 12285-1 (with test certificate) double-walled, for underground storage of fuel oil and diesel fuels, 1 dome (alternatively 2 domes possible). Capacity: 100,000 liters diameter: 2.900 mm length: approx. 15.750 mm Weight: approx. 18,800 kg In addition, we can also equip our tanks with the following accessories: - Leakage monitoring with under- and overpressure leak detector - Dome shaft with shaft cover in walkable or traversable drive-over design - Partition walls (as multi-chamber tank) - Interior coatings (e.g. 2-component epoxy resin), partial or full linings - Content and level measuring devices as well as control and regulation technology - Electric tank heaters - Pumps for heating oil, diesel, biodiesel or gasoline - Dispensers for diesel, biodiesel and gasoline - with complete tank data acquisition on request - External tank insulation with PU foam Tank is cleaned inside and outside coating is overhauled and checked with 14 kV. A cost-effective delivery with our own truck is possible. Just tell us the delivery place, you will get the exact freight cost immediately. If you need any further information, just give us a call or send us an e-mail. Hjdpfx Aei Enxdecrol Trade-in and purchase of tanks/containers is possible, just contact us. Delivery time after arrangement! We have such tanks of course also in the following sizes constantly in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters.

Condition: refurbished (used), Used storage tank made of steel according to DIN 6616/2, (with test certificate), double-walled, for above-ground storage, with saddle feet, 1 dome, optical leak warning device, limit value sensor and complete. Tank fitting consisting of: - Filling pipe 3" with TW closure - Dip tube 1" with dipstick - Suction combination Euroflex 3 (max. 150 l/hr.) - 1 vent nozzle 2" with vent cap. The container is equipped with the above fittings at the factory and is cleaned inside. Contents: 40,000 liters Diameter: 2,500 mm Length: approx. 8,700 mm Weight: approx. 7,200 kg The container can be given a new coat of paint in your desired RAL color and optionally equipped with a ladder including operating platform. A cost-effective delivery with your own truck is possible. Simply tell us the delivery location and you will immediately receive the exact freight costs. Hodjvm Uwxjpfx Acrsl If you need further information, just call us or send us an email. Trade-in and purchase of Tanks/containers are possible, just contact us. Delivery time by arrangement! Tank und Apparate Barth GmbH Werner-von-Siemens-Str. 36 76694 Forst

Condition: refurbished (used), Used storage tank made of steel according to DIN 6616/2, (with test certificate), double-walled, for above-ground storage, with saddle feet, 1 dome, optical leak warning device, limit value sensor and complete. Tank fitting consisting of: - Filling pipe 3" with TW closure - Dip tube 1" with dipstick - Suction combination Euroflex 3 (max. 150 l/hr.) - 1 vent nozzle 2" with vent cap. The container is equipped with the above fittings at the factory and is cleaned inside. Contents: 60,000 liters Diameter: 2,500 mm Length: approx. 12,650 mm Weight: approx. 9,950 kg The container can be given a new coat of paint in your desired RAL color and optionally equipped with a ladder including an operating platform. A cost-effective delivery with your own truck is possible. Simply tell us the delivery location and you will immediately receive the exact freight costs. If you need any further information, just call us or send us an email. Hjdpfsvm Uxiex Acrsl Trade-in and purchase of tanks/containers is possible, just contact us. Delivery time by arrangement! Tank und Apparate Barth GmbH Werner-von-Siemens-Str. 36 76694 Forst

Condition: refurbished (used), Used storage tank made of steel according to DIN 6616/2, (with test certificate) double-walled, for above ground storage, with saddle feet, 1 dome, optical leakage warning device, limit value transmitter and complete tank fitting consisting of: - Filling pipe 3" with TW-lock - dipstick pipe 1" with dipstick - Suction combination Euroflex 3 (max. 150 l/hour) - 1 vent pipe 2" with vent cap. Tank is equipped with the above fittings at the factory and is cleaned on the inside. Hjdpfx Acshvmiworol Capacity: 50.000 liters diameter: 2.500 mm length: approx. 10.800 mm Weight: approx. 8.800 kg The tank can be repainted in the RAL color of your choice and optionally equipped with a ladder incl. operating platform. A cost-effective delivery with our own truck is possible. Just let us know the place of delivery and you will immediately receive the exact freight costs. If you need any further information, just give us a call or send us an e-mail. Trade-in and purchase of tanks/containers is possible, just contact us for this. Delivery time after arrangement! We have such tanks of course also in the following sizes constantly in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters. Tank and apparatus Barth Ltd. Werner-von-Siemens-Str. 36 76694 Forst

Condition: refurbished (used), Used storage tank made of steel according to DIN 6616/2, (with test certificate) double-walled, for above ground storage, with saddle feet, 1 dome, optical leakage warning device, limit value transmitter and complete tank fitting consisting of: - Filling pipe 3" with TW-lock - dipstick pipe 1" with dipstick - Suction combination suction pipe (1 1/2" or 2") - 1 vent pipe 2" with vent cap Tank is factory equipped with the above fittings and is cleaned inside. Hsdpfsguzhcjx Acrol Capacity: 100.000 liters diameter: 2.900 mm length: approx. 15.750 mm Weight: approx. 18.800 kg The tank can be repainted in the RAL color of your choice and optionally equipped with a ladder incl. operating platform. A cost-effective delivery with our own truck is possible. Just let us know the place of delivery and you will immediately receive the exact freight costs. If you need any further information, just give us a call or send us an e-mail. Trade-in and purchase of tanks/containers is possible, just contact us for this. Delivery time after arrangement! We have such tanks of course also in the following sizes constantly in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters. Tank and apparatus Barth Ltd. Werner-von-Siemens-Str. 36 76694 Forst

Condition: refurbished (used), Used storage tank made of steel according to DIN 6616/2, (with test certificate), double-walled, for above-ground storage, with saddle feet, 1 dome, optical leak warning device, limit value sensor and complete. Tank fitting consisting of: - Filling pipe 3" with TW closure - Dip tube 1" with dipstick - Suction combination Euroflex 3 (max. 150 l/hr.) - 1 vent nozzle 2" with vent cap. The container is equipped with the above fittings at the factory and is cleaned inside. Contents: 30,000 liters Diameter: 2,000 mm Length: approx. 9,9400 mm Weight: approx. 5,200 kg The container can be given a new coat of paint in your desired RAL color and optionally equipped with a ladder including an operating platform. Hsdpfjvm Uvnox Acrol A cost-effective delivery with your own truck is possible. Simply tell us the delivery location and you will immediately receive the exact freight costs. If you need any further information, just call us or send us an email. Trade-in and purchase of tanks/containers is possible, just contact us. Delivery time by arrangement! Tank und Apparate Barth GmbH Werner-von-Siemens-Str. 36 76694 Forst

Condition: refurbished (used), Used storage tank made of steel according to DIN 6616/2, (with test certificate) double-walled, for above ground storage, with saddle feet, 1 dome, optical leakage warning device, limit value transmitter and complete tank fitting consisting of: - Filling pipe 3" with TW-lock - dipstick pipe 1" with dipstick - Suction combination Euroflex 3 (max. 150 l/hour) - 1 vent pipe 2" with vent cap. Tank is equipped with the above fittings at the factory and is cleaned on the inside. Hodpshvidgefx Acrol Capacity: 80.000 liters diameter: 2.900 mm length: approx. 12.780 mm Weight: approx. 15.750 kg The tank can be repainted in the RAL color of your choice and optionally equipped with a ladder incl. operating platform. A cost-effective delivery with our own truck is possible. Just let us know the place of delivery and you will immediately receive the exact freight costs. If you need any further information, just give us a call or send us an e-mail. Trade-in and purchase of tanks/containers is possible, just contact us for this. Delivery time after arrangement! We have such tanks of course also in the following sizes constantly in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 100,000 liters. Tank and apparatus Barth Ltd. Werner-von-Siemens-Str. 36 76694 Forst Tel: 07251 / 915119 Fax: 07251 / 915175

Condition: refurbished (used), Used storage tank made of steel according to DIN 6616/2, (with test certificate), double-walled, for above-ground storage, with saddle feet, 1 dome, optical leak warning device, limit value sensor and complete. Tank fitting consisting of: - Filling pipe 3" with TW closure - Dip tube 1" with dipstick - Suction combination Euroflex 3 (max. 150 l/hr.) - 1 vent nozzle 2" with vent cap. The container is equipped with the above fittings at the factory and is cleaned inside. Contents: 25,000 liters Hodpfx Ajvm Uuwjcrel Diameter: 2,000 mm Length: approx. 8,400 mm Weight: approx. 3,500 kg The container can be given a new coat of paint in your desired RAL color and optionally equipped with a ladder including operating platform. A cost-effective delivery with your own truck is possible. Simply tell us the delivery location and you will immediately receive the exact freight costs. If you need any further information, just call us or send us an email. Trade-in and purchase of Tanks/containers are possible, just contact us. Delivery time by arrangement! Tank und Apparate Barth GmbH Werner-von-Siemens-Str. 36 76694 Forst

Condition: refurbished (used), Used storage tank made of steel according to DIN 6616/2, (with test certificate), double-walled, for above-ground storage, with saddle feet, 1 dome, optical leak warning device, limit value sensor and complete. Tank fitting consisting of: - Filling pipe 3" with TW closure - Dip tube 1" with dipstick - Suction combination Euroflex 3 (max. 150 l/hr.) - 1 vent nozzle 2" with vent cap. The container is equipped with the above fittings at the factory and is cleaned inside. Contents: 16,000 liters Diameter: 2,000 mm Length: approx. 5,475 mm Weight: approx. 2,500 kg The container can be given a new coat of paint in your desired RAL color and optionally equipped with a ladder including operating platform. A cost-effective delivery with your own truck is possible. Simply tell us the delivery location and you will immediately receive the exact freight costs. If you need further information, just call us or send us an email. Trade-in and purchase of Tanks/containers are possible, just contact us. Hedpfsvm Urvjx Acrsl Delivery time by arrangement! Tank und Apparate Barth GmbH Werner-von-Siemens-Str. 36 76694 Forst

Condition: used, Year of construction: 1986, functionality: fully functional, heating capacity: 1,500 kW (2,039.43 HP), nominal heat output: 1,500 kW (2,039.43 HP), operating pressure: 6 bar, pressure: 6 bar, Equipment: documentation/manual, hot water, We are offering the following used MAWERA FU 1300 RA heating system, year of construction 1986. Including control cabinet, flue gas cleaning, and induced draught fan. Hodjykmd Aepfx Acrel Model: FU 1300 RA Year of manufacture: 1986 Rated thermal output: 1500 kW Permissible operating overpressure: 6 bar Permissible flow temperature: 120°C Price: €3,000 Additionally, we are offering a used MAWERA FU 550 RIA heating system, year of construction 2001. Model: FU 550 RIA Year of manufacture: 2001 Rated thermal output: 550 kW Permissible operating overpressure: 6 bar The FU 550 RIA has already been dismantled. Price: €3,000 We are also offering a push-floor discharge unit including cylinders with double trough screw conveyor and hydraulic power unit. Bunker dimensions: 10x4m Price: €3,000 Furthermore, we offer an Eder pressure maintenance and degassing unit for sale. Fully functional, rubber bladders were replaced a few years ago. Price: €2,000 For dimensions of the system, please refer to the pictures. The system is still partially in operation and can be inspected at any time. Scheduled dismantling date: mid-May 2026. If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2008, functionality: fully functional, heating capacity: 50 kW (67.98 HP), Wood chip system with 50 kW heating capacity already disassembled Hedpfxev Ngq Ae Acrel complete with boiler, stocker unit, and discharge system

Condition: reconditioned (used), functionality: fully functional, operating pressure: 140 bar, high-pressure hose length: 10,000 mm, empty load weight: 146 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KARCHER HDS 9/14-4 ST HOT WATER WASHER NEW HEATING COIL The device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 140 bar and 930 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Voltage (Ph/V/Hz): 3 / 400 / 50 Discharge capacity (l/h): 500 - 930 Operating pressure (bar): 30 - 140 Feed water temperature (°C): 85-155 Connection power (kW): 6.4 Fuel consumption (kg/h): 5.8 Water inlet: 3/4″ Fuse (A): 16 Hjdpfxjw I D Tce Acrsl Weight with accessories (kg): 146.9 Dimensions (L x W x H) (mm): 1110 x 565 x 690 EQUIPMENT: NEW HEATING COIL NEW durable German R+M pressure gun NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE HIGHEST FEATURES FEATURES: Open oil system - no operating time limits A built-in chemical tank allows for dispensing cleaning fluid directly through the machine A very clear and intuitive control panel A simple design and easy access to individual components under the housing make the machine user-friendly and easy to service The RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other pipes.

Condition: reconditioned (used), functionality: fully functional, operating pressure: 140 bar, high-pressure hose length: 10,000 mm, empty load weight: 146 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KARCHER HDS 9/14-4 ST HOT WATER WASHER NEW HEATING COIL The device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 140 bar and 930 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Voltage (Ph/V/Hz): 3 / 400 / 50 Discharge capacity (l/h): 500 - 930 Operating pressure (bar): 30 - 140 Feed water temperature (°C): 90 Hedsw I D Aqopfx Acrsl Connection power (kW): 6.4 Fuel consumption (kg/h): 5.8 Water inlet: 3/4″ Fuse (A): 16 Weight with accessories (kg): 146.9 Dimensions (L x W x H) (mm): 1110 x 565 x 690 EQUIPMENT: NEW HEATING COIL NEW durable German R+M pressure gun NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits A built-in chemical tank allows for dispensing cleaning fluid directly through the machine A very clear and intuitive control panel A simple design and easy access to individual components under the housing make the machine user-friendly and easy to service The RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other pipes.

Condition: used, Year of construction: 2003, functionality: fully functional, total height: 4,000 mm, total length: 7,100 mm, total width: 8,100 mm, temperature: 80 °C, heating capacity: 116 kW (157.72 HP), Equipment: cabin, Complete wet paint installation with prep area, wet paint booth, mixing room, drying oven, and finishing zone. The installation can still be inspected in Diest. More details in the attachment or upon request. - Dimensions: LxWxH = 8,100 x 7,100 x 4,000 mm (external) and 8,000 x 7,000 x 3,950 mm (internal). - Height to underside of rail = 3,740 mm measured from floor level. - With a shared sliding door with the spray booth. Hedpfex H Rhrox Acrsl - Sliding doors as oven exit door: WxH = 1,200 x 3,800 mm, equipped with 1 window, 2 panels. - Emergency door with window in side wall: WxH = 800 x 1,900 mm, self-closing with door closer and latch. The emergency door is fitted with sealing rubbers, large in diameter and highly elastic EPDM quality. - Wall type: vertical double-walled sandwich panels filled with mineral wool, thickness 55 mm. Includes lighting, ventilation unit, control panel, and a complete monorail system in front of and throughout the installation up to the finishing zone.

Condition: good (used), Year of construction: 1976, functionality: fully functional, machine/vehicle number: 423, roller width: 800 mm, We are offering this heating press from 1976 for sale. The press was in use until recently for vulcanizing tread segments for retreading wheel loader tyres. Included are also a considerable number of mould segments ranging from 420 to 750 mm in width. The press is electrically heated and has complete safety documentation. The heating surface is approximately 800x1100 mm. If you have any questions or require further information, please feel free to send us a message or call us. Hedpsx Nqlvsfx Acrjl

Condition: excellent (used), Viessmann Vitomax heating boiler 2100 kW. Hsdsyzct Nopfx Acrsl

Condition: used, 🔥 For Sale: HDG Compact 15–50 kW Biomass Boiler – Flexible and Compact Wood Chip Heating System 🔥 The HDG Compact 15–50 kW is a versatile biomass boiler, ideal for residential buildings, small commercial premises or agricultural applications. It is suitable for operation with wood chips and pellets, offering modular output and fully automatic operation within a space-saving design. — Key Features: 🌲 Fuel: Wood chips or pellets ⚡ Output: 15–50 kW 🧠 Fully automatic ignition, feeding and cleaning 🔧 Compact construction – perfect for plant rooms with limited space 🇩🇪 HDG Bavaria – Precision biomass technology made in Germany 📍 Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) — 💼 Top Heating Systems – ProfiKazán Compact biomass heating systems with maximum flexibility. TOP HEATING SYSTEMS – Used heating units, boilers, heat pumps & accessories direct from stock We are a family business with around 20 years of experience in heating technology and operate a 1,500 m² warehouse in Mosonmagyaróvár, Hungary, with a constantly available stock of about 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – approx. 15 km from the Austrian border and approx. 80 km from Vienna. Mosonmagyaróvár is the first major town on the Hungarian side after the Austrian border. 🔥 Our range includes, among others: • Wood chip boilers • Pellet boilers • Wood gasification boilers • Log wood boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermal ventilators • Hot air blowers • Warm air heaters • Industrial heaters • Buffer tanks • Heat exchangers • Augers • Discharge systems • Burners Hedswahhvspfx Acrsl • Pumps • Comprehensive heating accessories ⚙️ Accessories and Components: Additionally, we offer a large selection of accessories, including circulation pumps, plate heat exchangers and many more components – from private to industrial scale. 🏭 Brands in our range: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus and many more. 🌐 Current Offers: You can find most of our current offers on our website: topheatingsystems.com We also have further units available that are not yet listed online. 📅 Viewing: Viewings can be arranged by appointment at our warehouse. If you are interested, please feel free to contact us – we look forward to helping you find the right solution.

Condition: used, 🔥 For Sale: Fröling P4 3–15 kW Pellet Boiler – Fully Automatic and Silent for Residential Buildings 🔥 The Fröling P4 3–15 kW is a high-quality, fully automatic pellet boiler – ideal for modern homes, passive houses, and well-insulated buildings. It offers whisper-quiet operation, minimal maintenance, and outstanding energy efficiency. ⸻ Key Features: 🌾 Fuel: Wood pellets ⚡ Output: 3–15 kW 🧠 Fully automatic feeding, ignition, and cleaning 🔧 Integrated control, low-noise operation 🇦🇹 Fröling – Premium pellet technology from Austria 📍 Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) ⸻ 💼 Top Heating Systems – ProfiKazán Efficient heating solutions for low-energy buildings. TOP HEATING SYSTEMS – Used heating systems, boilers, heat pumps & accessories directly from stock We are a family-run business with around 20 years of experience in heating technology, operating a 1,500 m² warehouse in Mosonmagyaróvár, Hungary, with a continuously available stock of approximately 50–60 units. Hsdpfswah Sbsx Acrjl 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – about 15 km from the Austrian border and approx. 80 km from Vienna. Mosonmagyaróvár is the first major town on the Hungarian side after the Austrian border. 🔥 Our range includes, among others: • Wood chip boilers • Pellet boilers • Wood gasification boilers • Log wood boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermo ventilators • Hot air blowers • Warm air heaters • Industrial heaters • Buffer tanks • Heat exchangers • Screw conveyors • Automatic fuel extraction systems • Burners • Pumps • Comprehensive heating accessories ⚙️ Accessories and Components: In addition, we offer a wide range of accessories, including circulation pumps, plate heat exchangers, and many other components – covering both private and industrial applications. 🏭 Brands in our portfolio: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus, and many more. 🌐 Current offers: Most of our current stock can be found on our website: topheatingsystems.com We also have further units available that are not yet listed online. 📅 Inspection: Visits to our warehouse are possible by prior arrangement. If you are interested, please feel free to contact us – we are happy to help you find the right solution.

Condition: used, For sale: MAWERA 470 kW Biomass Boiler – Robust Industrial Woodchip Heating System The MAWERA biomass boiler with a nominal heat output of 470 kW is ideally suited for industrial and agricultural heating applications with a consistently high heat demand. Austrian quality, durable construction, and efficient heat transfer are hallmarks of this boiler. --- Technical Specifications: • Fuel types: Woodchips, sawdust, planing shavings • Nominal heat output: 470 kW • Combustion system:   ◦ Feed auger for fuel transport   ◦ Combustion chamber with heat-resistant fireclay lining • Control & air supply:   ◦ Primary and secondary air controlled via motorized dampers and blowers   ◦ Temperature-based control featuring flue gas and combustion chamber sensors • Boiler design:   ◦ Water-bearing boiler with generously sized heat exchanger surface   ◦ Front and rear firebox doors for easy access and maintenance --- Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) TOP HEATING SYSTEMS – Used heating equipment, boilers, heat pumps & accessories direct from stock We are a family-run business with around 20 years of experience in heating technology. Our 1,500 m² warehouse in Mosonmagyaróvár, Hungary, maintains a constantly available stock of approximately 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – about 15 km from the Austrian border and 80 km from Vienna. Mosonmagyaróvár is the first major city on the Hungarian side after the Austrian border. 🔥 Our product range includes: • Woodchip boilers • Pellet boilers • Wood gasification boilers • Log wood boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermo ventilators • Hot air blowers • Warm air heaters • Industrial heating systems • Buffer tanks • Heat exchangers • Conveyor augers • Automatic fuel extraction systems • Burners • Pumps • Comprehensive heating accessories ⚙️ Accessories and components: We also stock a wide selection of accessories, including circulation pumps, plate heat exchangers, and many other components—from domestic to industrial specifications. 🏭 Brands in our portfolio: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus, and many more. 🌐 Current offers: Most of our current offers can be found on our website: topheatingsystems.com Hsdpomuzq Ejfx Acrel We also have additional equipment not yet listed online. 📅 Inspection: Viewing is available by appointment at our warehouse. If interested, please contact us—we are happy to assist you in finding the right solution.

Condition: used, 🔥 For Sale: Fröling S3 15–31 kW Wood Gasification Boiler – Efficient and Affordable Wood Heating 🔥 The Fröling S3 is a well-balanced, high-efficiency wood gasification boiler with an output range of 15–31 kW – ideal for residential homes, smaller facilities, and agricultural buildings. It offers clean combustion, long burn times, and easy operation – all at an attractive price point. —— Main features: 🌳 Fuel: Split logs / Hardwood ⚡ Output: 15–31 kW 🧠 Wood gasification with optimized air management 🔧 Manual loading, spacious filling chamber 🇦🇹 Fröling – Austrian design focused on sustainability 📍 Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) —— 💼 Top Heating Systems – ProfiKazán Intelligent wood gasification systems for residential and commercial use. TOP HEATING SYSTEMS – Used heating systems, boilers, heat pumps & accessories direct from stock We are a family business with around 20 years of experience in heating technology and operate a 1,500 m² warehouse in Mosonmagyaróvár, Hungary, with a constantly available inventory of approx. 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – about 15 km from the Austrian border and approx. 80 km from Vienna. Mosonmagyaróvár is the first major city on the Hungarian side after the Austrian border. 🔥 Our product range includes, among others: • Wood chip boilers • Pellet boilers • Wood gasification boilers • Log wood boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermal ventilators • Hot air blowers • Warm air heaters Hodpfev Uw Ehox Acrjl • Industrial heaters • Buffer tanks • Heat exchangers • Auger conveyors • Discharge units • Burners • Pumps • Comprehensive range of heating accessories ⚙️ Accessories and components: We also stock a wide range of accessories, including circulation pumps, plate heat exchangers, and many other components – suitable for residential to industrial applications. 🏭 Brands in our range: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus, and many more. 🌐 Current offers: Most of our current offers can be found on our website: topheatingsystems.com We also have additional units that are not yet listed. 📅 Viewing: A visit to our warehouse is possible by appointment. If you are interested, please contact us – we will be happy to help you find the right solution.

Condition: used, For sale: KWB Multifire 20–80 kW Biomass Boiler – Flexible Heating with Wood Chips and Pellets The KWB Multifire 20–80 kW is a fully automatic biomass boiler, ideal for apartment buildings, commercial facilities, or agricultural operations. It can be operated with both wood chips and pellets, offering maximum fuel flexibility, reliable performance, and high efficiency. — Key Features: • Fuel: Wood chips / Pellets • Output: 20–80 kW • Fully automatic combustion, feeding, and cleaning • Robust construction for continuous operation • KWB – Austrian innovation in biomass heating Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) — Top Heating Systems – ProfiKazán Flexible biomass heating systems for residential and commercial buildings. TOP HEATING SYSTEMS – Used heating plants, boilers, heat pumps & accessories available directly from stock We are a family-run business with around 20 years of experience in heating technology and have a 1,500 m² warehouse in Mosonmagyaróvár, Hungary, with a continuously available inventory of approx. 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – about 15 km from the Austrian border and about 80 km from Vienna. Mosonmagyaróvár is the first major city on the Hungarian side after the Austrian border. Hodpottqd Njfx Acrel 🔥 Our range includes, among others: • Wood chip boilers • Pellet boilers • Wood gasification boilers • Log wood boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermal fans • Hot air blowers • Warm air heaters • Industrial heaters • Buffer tanks • Heat exchangers • Feed augers • Discharge systems • Burners • Pumps • Comprehensive heating accessories ⚙️ Accessories and components: We also offer a wide range of accessories, including circulation pumps, plate heat exchangers, and many other components – suitable for private applications as well as industrial scale. 🏭 Brands in our range: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus, and many more. 🌐 Current offers: A large part of our current stock can be found on our website: topheatingsystems.com In addition, we have further units not yet advertised. 📅 Viewing: Viewing at our warehouse is possible by appointment. If you are interested, please feel free to contact us – we will gladly help you find the right solution.

Year of construction: 2021, condition: new, pressing force: 50 t, Here are the technical data of the offered machine: If the press does not exactly meet your requirement profile, please click to request an individual offer exactly according to your needs: Contact us for an individual offer Hjdpfsgrkigex Acrsl HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Technical data + information: hydraulic 50 T heating press for laboratories It is a lower piston press with an open height of 400 mm ram travel 300 mm heating platen capacity up to 250 degrees heating plate size 200x200mm weight about 1500 kg height 1950 mm hydraulics built in the press body Hydraulic tank with 100 l monitored vertical door for the press chamber pressure, position - and speed adjustable via SIEMENS S 7 1200 SIEMENS touch screen monitor with 9 inch Safety technology from SICK (C-press, hydraulic press, hydraulic press, laboratory press, laboratory) Are you looking for a custom-fit machine? Contact us for an individual offer. Our hydraulic presses are manufactured according to German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore our presses exceed the Canadian and European safety requirements, because they correspond in all points to the national Brazilian safety guideline NR 12, which is based on these. Our great strength is the special machine construction and the press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, pressing force: 300 t, table length: 1,800 mm, table width: 1,100 mm, Vulcanizing Press – Manufacturer: Durendus – 300 t Heating Press – Table 1,800 × 1,100 mm For sale is a high-performance hydraulic vulcanizing press from the manufacturer Durendus with a press force of 300 t. The machine features large-format heating plates measuring 1,800 × 1,100 mm, a clear column spacing of 2,100 mm, and a stroke of 600 mm, making it particularly suitable for large-surface vulcanizing, laminating, and thermal pressing processes in industrial applications. ==== Technical Data & Information: Vulcanizing Press Durendus – 300 t Heating Press ==== General Details - Manufacturer: Durendus - Model: Vulcanizing Press - Design: Heating Press / Vulcanizing Press - Press force: 300 t - Machine weight: approx. 22,000 kg - Dimensions (W × D × H): approx. 3,800 × 1,870 × 3,600 mm ==== Working Area - Clear width between columns: 2,100 mm - Max. distance between heating plates: 800 mm - Stroke: 600 mm - Table height over floor (incl. heating plates): 800 mm ==== Table and Ram - Heating plate size: 1,800 × 1,100 mm - Table (lower), with T-slots: 2,100 × 1,100 mm - Ram with T-slots: 1,900 × 1,100 mm ==== Speeds - Approach speed: 150 mm/s - Working speed: 15 mm/s - Return speed: 150 mm/s ==== Hydraulics (Version 1) - Hydraulic unit: Bosch Rexroth - Hydraulic pump: 105 l/min - Motor power: 22 kW ==== Hydraulics (Version 2) - Hydraulic unit: Duplomatic / Daikin Hybrid-Servo - Hydraulic pump: 130 l/min - Motor power: 15 kW ==== Control and Operation - Two-hand operation - Ram return via control button - Travel limit via Leuze measuring system and monitor ==== Features - CE certificate - User manual included ===== Vulcanization, rubber processing, plastics processing, lamination processes, large-format molding presses, thermal pressing procedures, heavy-duty applications Hsdpfx Asx Ap Itecrel Vulcanizing press, heating press, hydraulic press, large-format press, laminating press, molding press, thermal press, heavy-duty press, try-out press, tool tryout press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with Brazilian national safety standard NR 12, which is based on these directives. Our core strengths are special machine construction and press automation. We supply custom hydraulic presses at surprisingly competitive prices. We use components from leading European manufacturers for the hydraulic systems in our presses.

Condition: like new (used), Year of construction: 2023, total height: 2,500 mm, table height: 900 mm, pressing speed: 8 mm/s, pressing force: 50 t, overall weight: 2,900 kg, operating pressure: 250 bar, ram plate width: 498 mm, table length: 522 mm, table width: 522 mm, type of input current: AC, power: 10 kW (13.60 HP), input voltage: 400 V, distance table to ram: 600 mm, oil tank capacity: 130 l, operating speed: 8 mm/s, Equipment: safety light barrier, Vulcanizing Press – Manufacturer Hidrobrasil – 50 t Double Column Heated Press For sale is a hydraulic vulcanizing press from the manufacturer Hidrobrasil with a pressing force of 50 t, featuring a robust double-column design. The machine is equipped with electrically heated platens (approx. 522 × 522 mm), a maximum daylight opening of 600 mm, as well as precisely adjustable pressing and heating parameters. It is particularly suitable for industrial vulcanizing, laminating, and thermal pressing processes in continuous operation. ===== Technical Data + Information: Vulcanizing Press Hidrobrasil – 50 t Heated Press ==== General Specifications - Manufacturer: Hidrobrasil - Model: Vulcanizing Press - Design: Double Column Heated Press - Pressing Force: 50 t (500 kN) - Machine Weight: approx. 2.9 t - Overall Height: approx. 2,500 mm - Minimum Hall Height: 3,500 mm ==== Working Area - Max. Opening: 600 mm - Stroke / Min. Opening: 300 / 300 mm - Table Height above Floor (with heating platens): 900 mm ==== Table and Ram - Table Size / Platens: approx. 522 × 522 mm - Ram Size / Platens: approx. 498 × 498 mm - Number of Heating Levels: 1 ==== Forces - Free Stripping Force: 20 kN - Pressure Range: 8 – 50 t ==== Speeds - Idle Speed: up to 10 mm/s - Opening Speed: up to 40 mm/s - Pressing Speed: max. 8 mm/s ==== Hydraulics - Operating Pressure: max. 250 bar - Pressure Build-Up Time: max. 3 sec. - Pressure Accuracy: ± 5 bar Hsdpfxetwv S Nj Acrsl - Main Pump: Bosch Rexroth Gear Pump approx. 26 l/min - Oil Volume: approx. 130 l (HLP 46) - Automatic Pressure Adjustment - Pressure Hold Time up to 3,600 sec. - Circulating Oil Cooling - Oil Temperature Monitoring ==== Heating System - 2 electrically heated platens - Temperature Range up to 200 °C - Thermally Neutral: 80 – 120 °C - Integrated Temperature Sensor - Insulated Platens ==== Control and Operation - Two-Hand Operation (adjustable or fixed) - Travel Limitation by Pressure or Position - Pressure Adjustment via Rotary Control - Signal Tower (Red / Yellow / Green) - Operation via Control Cabinet ==== Electrical - Main Supply: 400 V AC - Control Voltage: 24 V DC - Frequency: 50 Hz - Hydraulic Motor Rating: 7.5 kW - Total Connected Load: approx. 10 kW (without heating platens) ==== Miscellaneous - Sound Pressure Level: max. 78 dB(A) - Parallelism Deviation: ± 0.1 mm - Deflection: < 0.2 mm/m ===== Vulcanization, rubber processing, plastics processing, laminating processes, compression molding, thermal pressing methods, hot pressing, continuous operation Vulcanizing press, heated press, hydraulic press, rubber press, laminating press, forming press, thermo press, double column press, tryout press, tool try-out press Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer.