Used Heavy Drill Machine for sale (67,389)

Condition: used, Box column drilling machine WEBO Series- No 132 Machine No: 9 Drilling capacity 50 mm Spindle cone MK 5 - long quill throat 430 mm spindle stroke 280 mm Height adjustment of drill head 500 mm Table size Ø 725 mm Distance between drill spindle and table max. 740 mm Distance between drill spindle and clamping surface on machine base max. 1240 mm Spindle speed 55-820 rpm Feed rate level 1 0.13 - 0.2 - 0.27 - 0.4 mm/rev. Feed rate stage 2 0.6 - 0.83 - 1.17 - 1.8 mm/rev. Column diameter 300 mm Motor power 2.8 / 3.6 kW pole-changing Lodpfx Aoqa Txqsiashf Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator - Manual drill head height adjustment via hand crank, clamping with clamping screws - Rotatable drill table with mechanical clamping - Table height adjustment via hand crank - Clamping surface on machine base 600 x 550 mm Top height of drill head 3020 mm Overall height drill head bottom 2520 mm Space requirement L x W x H 1400 x 780 x 2520 mm Weight 1600 kg good condition

Condition: used, Column Drilling Machine ALZMETALL Type AB 3 ESV Machine No. 15967 Year of manufacture 1977 Drilling capacity: 32 mm Spindle taper: MT 3 – short quill Distance spindle nose – table: 545 mm (short quill) Distance spindle adapter – table: 395 mm (MT adapter) Throat: 290 mm Quill stroke: 160 mm Table size: Ø 545 mm Lodpfsharwvex Aiajhf Column diameter: 220 mm Spindle speed: 55 – 1450 rpm, stepless Motor power: 1 / 1.6 kW Supply voltage: 380 Volt, 50 Hz - Spindle speed via 2 gearbox stages, 2 motor speeds and stepless through variable-speed drive - Intermediate gear stage for high torque at low speeds - MT adapter from MT3 to MT4 - Automatic feed 0.1 – 0.2 – 0.3 mm/rev - Swiveling drill table - Table height adjustment via hand crank - Heavy machine base with machined workpiece support surface (not original Alzmetall) - Work area lighting Space required (L x W x H): 1150 x 650 x 2000 mm Weight: 850 kg Good condition

Condition: used, functionality: fully functional, mileage: 4 km, power: 35 kW (47.59 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 60 l, color: green, overall weight: 4,350 kg, empty load weight: 4,350 kg, operation weight: 4,300 kg, mast type: duplex, Year of construction: 2023, operating hours: 811 h, platform length: 4,500 mm, transport length: 2,950 mm, transport width: 2,280 mm, transport height: 2,550 mm, Equipment: hammer hydraulics, hydraulics, rubber tracks, Used MW1000 Pile Driving Machine in Good Condition. The MW1000 pile driving machine is a high-performance and versatile unit designed for efficient and precise pile installation in various applications such as solar power plants, highway guardrails, vineyard installations, and construction projects. Working Hours: 811 hours Year of Manufacture: 2023 Optional Equipment: Screw Attachment, DTH and Auger Drilling Attachment, Pile Extractor, GPS/GNSS, Remote Control, and Automatic Leveling System Engine Brand: YANMAR Power: 35 kW / Stage 5 – 42 kW / Stage 3 Rated Speed: 2200 rpm Fuel Tank Capacity: 60 liters DPF Filter: Standard on Stage 5 engines Hammer Power: 1200 Joules Operating Pressure: 120 bar Impact Frequency: 570 – 1180 blows/min Hydraulic System Flow Rate: 50 – 100 L/min Pressure: 180 bar Hydraulic Oil Tank: 150 liters Travel / Mobility Low / High Speed: 2.2 / 4 km/h Climbing Ability (pile driving): 20% Side Slope (curb operation): 10° Track Type: Rubber tracks Dimensions Ledpsy Efbdofx Aiashf Transport Width: A1 – 2280 mm Transport Height: A2 – 2550 mm Transport Length: A3 – 2950 mm Machine Width: A1 – 2280 mm Machine Height: A4 – 4400 mm Machine Length: A5 – 3110 mm Mast Height: A6 – 4500 mm Weight: 4350 kg Movement Capabilities Rotation: None Tilt: 10° Mast Forward Tilt: 12° Mast Backward Tilt: -63°

Condition: new, functionality: fully functional, mileage: 4 km, power: 45 kW (61.18 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 60 l, color: green, overall weight: 5,200 kg, empty load weight: 5,200 kg, operation weight: 5,200 kg, mast type: duplex, Year of construction: 2025, platform length: 6,500 mm, transport length: 2,240 mm, transport width: 44,145 mm, transport height: 2,315 mm, Equipment: hammer hydraulics, hydraulics, rubber tracks, The MW1600-TX5 pile driver is a versatile and high-performance machine, designed for efficient pile installation in construction, solar farms, guardrails, and infrastructure projects. With its powerful hammer, flexible mast movement, and operator-focused design, the MW1600TX-5 provides superior control and precision, even in challenging terrains. 90-Degree Rotating Platform: The upper body platform with the mast can rotate 90 degrees, allowing for precise pile placement without repositioning the entire machine. Ljdex Tg Nxopfx Aiaehf 15-Degree Mast Tilting: The mast can tilt 15 degrees left and right, providing greater flexibility on uneven or sloped terrains.

Condition: new, functionality: fully functional, mileage: 4 km, power: 35 kW (47.59 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 60 l, color: green, overall weight: 4,800 kg, empty load weight: 4,800 kg, operation weight: 4,300 kg, mast type: duplex, Year of construction: 2025, platform length: 4,700 mm, transport length: 3,820 mm, transport width: 1,980 mm, transport height: 2,365 mm, Equipment: hammer hydraulics, hydraulics, rubber tracks, The MW1000-TX5 pile driver is a versatile and high-performance machine, designed for efficient pile installation in construction, solar farms, guardrails, and infrastructure projects. With its powerful hammer, flexible mast movement, and operator-focused design, the MW1000TX-5 provides superior control and precision, even in challenging terrains. 90-Degree Rotating Platform: The upper body platform with the mast can rotate 90 degrees, allowing for precise pile placement without repositioning the entire machine. Lsdpfex Tg Etox Aiajhf 15-Degree Mast Tilting: The mast can tilt 15 degrees left and right, providing greater flexibility on uneven or sloped terrains.

Condition: new, functionality: fully functional, mileage: 4 km, power: 35 kW (47.59 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 60 l, color: green, overall weight: 4,750 kg, empty load weight: 4,750 kg, operation weight: 4,300 kg, mast type: duplex, Year of construction: 2025, transport length: 3,820 mm, transport width: 1,980 mm, transport height: 2,365 mm, Equipment: hammer hydraulics, hydraulics, rubber tracks, The MW1200 pile driver is a high-performance and heavy-duty machine designed for efficient and precise pile installation in a variety of construction applications. With its powerful hammer, extended mast height of 6.1 m, and adjustable settings, the MW1200 is ideal for solar farms, fencing, guardrails, and infrastructure projects. Ljdpfx Aiox Tg Dpjaehf

Condition: new, functionality: fully functional, mileage: 4 km, power: 35 kW (47.59 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 60 l, color: green, overall weight: 4,350 kg, empty load weight: 4,350 kg, operation weight: 4,300 kg, mast type: duplex, Year of construction: 2025, platform length: 4,500 mm, transport length: 2,950 mm, transport width: 2,280 mm, transport height: 2,550 mm, Equipment: hammer hydraulics, hydraulics, rubber tracks, The MW1000 pile driver is a high-performance, versatile machine designed for efficient and precise pile installation in various solar park, guardrail, vineyard, and construction Lodpfx Aijx Tf R Usajhf applications.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: AB/222595, total width: 1,950 mm, total length: 2,300 mm, total height: 1,850 mm, empty load weight: 1,240 kg, Equipment: CE marking, MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,300 x 1,950 x 1,850 mm Lhjdpoy Akdxefx Aiajf Unladen weight: 1,240 kg Voltage: 400 V Power consumption: 10 A EQUIPMENT CE marking

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, feed rate X-axis: 95 m/min, plate height: 60 mm, plate length: 900 mm, plate width: 3,000 mm, production capacity: 1,500 unit/h, TECHNICAL DETAILS Minimum panel width: 250 mm Maximum panel width: 3,000 mm Minimum panel length: 100 mm Maximum panel length: 900 mm Lhsdpfx Aoyzn Sdoiajf Minimum panel thickness: 12 mm Maximum panel thickness: 60 mm Maximum panel weight: 50 kg Working height: 1,060 mm Panel conveyor speed with inverter: 20 - 95 m/min Speed for panels over 50 kg: 50 m/min MACHINE DETAILS Control model: TPA - Albatros - CNC 2000 EQUIPMENT EASYTOOL software 5 split lower vertical drilling heads, automatically adjustable with NC control, each with 26 independent spindles 2 horizontal drilling heads with split heads, 28 + 28 spindles (per side), independently arranged on two levels External reference: MMA004.003

Condition: ready for operation (used), functionality: fully functional, workpiece weight (max.): 50 kg, feed rate X-axis: 95 m/min, plate height: 60 mm, plate length: 900 mm, plate width: 3,000 mm, TECHNICAL DETAILS Panel width min.: 250 mm Panel width max.: 3,000 mm Panel length min.: 100 mm Panel length max.: 900 mm Panel thickness min.: 12 mm Panel thickness max.: 60 mm Maximum panel weight: 50 kg Lhjdjyzn D Tspfx Aiaof Working height: 1,060 mm Panel conveyor speed with inverter: 20 - 95 m/min Speed for panels over 50 kg: 50 m/min MACHINE DETAILS Control model: TPA - Albatros - CNC 2000 EQUIPMENT EASYTOOL software 5 segmented lower vertical drilling heads, automatically adjustable via NC control, each with 26 independent spindles 3 segmented upper vertical drilling heads, automatically adjustable via NC control, each with 26 independent spindles 2 horizontal drilling heads with split heads, 28 + 28 spindles (each side), independently arranged on two levels External reference: MMA004

Condition: not inspected (used), Year of construction: 2006, functionality: unexamined, rotational speed (max.): 2,970 rpm, workpiece length (max.): 2,500 mm, workpiece width (max.): 1,000 mm, Equipment: CE marking, TECHNICAL DETAILS Max. panel width: 1,000 mm Max. panel length: 2,500 mm Min. panel length: 250 mm Min. panel width: 100 mm Number of vertical lower groups: 5 Number of vertical upper groups: 1 Lateral horizontal groups: yes Number of pressure elements: 5 Number of horizontal lateral groups: 2 Motor power: 1.5 kW Speed: 2,970 rpm MACHINE DETAILS System control: TOPDRILL Machine programming software: WOODWOP Total installed power: 35 kW Lhsdpeyzy T Tefx Aiajf EQUIPMENT Lateral horizontal groups CNC positioning of the groups CNC positioning of the Z-axis Safety standards with CE marking Safety light barriers Automatic chip extraction The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and technical/commercial reference documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 6157

Condition: used, Year of construction: 2009, Doosan HM1000 Heavy Duty Twin Pallet Horizontal Machine Centre. S/No HM10000080 (11/2009) with Fanuc 31i model A Control, Pallet size 1000mm x 1000mm, Travels X = 2100mm, Y = 1250mm, Z = 1250mm, Big Plus Spindle BT50, Spindle speeds 20 – 6000rpm, RUCKLE Full ‘B’ axis, Max Table load 5000kg (upgrade capacity), ATC Carousel 90 positions, U Axis fitted to Spindle for D-Andrea Heads, Renishaw TS27R Tool Probe, Renishaw RMP 60 Spindle Probe, Qty of BT50 Toolholders (Backend only), Screw Drive Swarf Conveyor, Filtermist, Main Spindle refurbished in 2020, Machine Weight 29,000kgs Location: These lots are located in Dunfermline, Scotland, UK. Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser. Lhjdpoy Amg Aefx Aiasf

Condition: excellent (used), Year of construction: 1996, Overhauled in 2005 Number of spindles: 2 Drilling capacity per spindle, steel: 1-6 mm Drilling depth: max. 350 mm Lhodpfx Aioy Eykgoaef Travel distance Z: 350 mm Travel distance W: 350 mm Drive power per spindle - 100% duty cycle: 3.7 kW - 50% duty cycle: 5.5 kW Spindle speed: 3,000 - 27,000 rpm Spindle mounting: Ø 10 - 60 mm Coolant pressure: max. 150 bar Coolant flow rate: 48 l/min Coolant volume: 1,000 l

Condition: reconditioned (used), functionality: fully functional, Drilling Machine Brand: GSP Lhsdjy D Hr Uspfx Aiaof Model: 407C22 Reach: 2250 mm Drilling capacity (steel): - Normal feed: 70 mm diameter - Slow feed: 90 mm diameter Carriage travel on arm: 1900 mm Drilling radius (min. - max.): 630 - 2500 mm Height (min. - max.): 500 - 1750 mm Vertical arm travel: 850 mm Spindle stroke: 400 mm Spindle speeds: 25 to 1400 rpm Motor power: 6 kW Spindle taper: MT 5

Condition: not inspected (used), Year of construction: 1987, machine/vehicle number: 5755, functionality: unexamined, drilling depth: 120 mm, rotational speed (max.): 1,125 rpm, rotational speed (min.): 160 rpm, table width: 300 mm, table length: 300 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Speed range: 160 – 1,125 rpm Drilling depth: up to 120 mm Table dimensions: 300 x 300 mm Lsdpey D Sydefx Aiashf MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,000 x 500 x 1,800 mm Machine weight: 250 kg FEATURES Vice External reference: 18

Condition: ready for operation (used), functionality: fully functional, input voltage: 380 V, type of input current: three-phase, spindle mount: MK 3, drilling depth: 120 mm, rotational speed (max.): 2,000 rpm, rotational speed (min.): 200 rpm, total width: 400 mm, total length: 600 mm, total height: 1,820 mm, table width: 320 mm, table length: 400 mm, Flott SB M3 ST 3-phase 380V motor runs smoothly. Stepless speed adjustment via variomatic spindle drive. Spindle speed adjustable from 200 to 2000 RPM. MT3 spindle taper. Röhm Supra 3-16mm drill chuck included. Machine vice included. Spindle safety guard. Emergency-off switch. Drilling depth adjustable. Maximum drilling depth: 120mm Table size: 400x320mm Table height adjustable. Overall dimensions: 60x40x182cm Year of manufacture: 1987 Made in Germany Overall good condition. Contact us for shipping options! Lsdpfxjy D Uihj Aiaohf € 2,350.00

Condition: used, bore capacity in steel (diameter) 28 mm throat 200 mm bore stroke 105 mm spindle taper MK 3 number of spindle speeds 12 spindle speed: 35 - 5600 Upm column diameter 92 mm table-size 340 x 360 mm table rotating 360 ° total power requirement 1,5 kW weight of the machine ca. ca. 170 kg dimensions of the machine ca. ca. 750 x 500 x 1800 mm Lhjdsfbh Akjpfx Aiasf

Condition: good (used), Spindle: 130 mm Travel X: 5000 mm Travel Y: 2500 mm Travel Z: 1000 mm Rotary table: 2000 x 2500 mm, approx. 30 tons With faceplate Vertical head Some tools included Lhedpfx Aiey D Tvgeasf Without platen field

Condition: used, Year of construction: 1999, bore capacity in steel (diameter) 36 mm Lhjdpfx Aoy Agpqsiajf throat 300 mm bore stroke 160 mm 4 speeds 100 - 1600 U/min column diameter 145 mm table-size 500 x 370 mm total power requirement 2,2 kW weight 440 kg dimensions 1200 x 800 x 2300 mm comes from a vocational school Features: - automatic feed - infinitely variable speed control - digital speed display - adjustable drilling depth stop - drill spindle guard

Condition: used, Machines for Export from Liquidation Stock No. 62506 = Double Mitre Saw RAPID Type DGL 5000 / 500 = Weight approx. 1,200 kg = Special price EUR 1,800 Stock No. 58052 = Eccentric Press MÜLLER GEFREES = Weight approx. 4,700 kg = Special price EUR 2,400 Stock No. 59408 = Eccentric Press Weingarten = Weight approx. 1,400 kg = Special price EUR 1,000 Stock No. 58984 = Eccentric Press Müller Gefrees = Weight approx. 1,400 kg = Special price EUR 1,000 Stock No. 58309 = Eccentric Press MÜLLER GEFREES = Weight approx. 1,000 kg = Special price EUR 1,000 Stock No. 60975 = Eccentric Press 16 tons (Year 2017) = Weight approx. 800 kg = Special price EUR 1,000 Stock No. 62267 (1) = Eccentric Press Weingarten 75 tons (Machine 1) = Weight approx. 4,800 kg Stock No. 62267 (2) = Eccentric Press Weingarten 75 tons (Machine 2) = Weight approx. 4,800 kg Ledpoy Erzdefx Aiajhf Stock No. 54183 = Hydraulic Press MÜLLER 10 tons, without hydraulic pump = Weight approx. 1,200 kg = Special price EUR 1,000 Stock No. 57780 = Hydraulic Press MÜLLER Type HEP 40 = Weight approx. 2,200 kg = Special price EUR 1,900 Hydraulic Press – Hydraulic power unit standing alongside = Weight approx. 3,000 kg Stock No. 60507 = WEBO Drilling Machine with 4 heads = Weight approx. 1,900 kg = EUR 1,600 Stock No. 57592 = ALZMETALL Drilling Machine with 2 heads = Weight approx. 1,700 kg = EUR 1,200 Stock No. 60699 = Column Drilling Machine WEBO MK5 = Weight 1,600 kg = Special price EUR 1,600 Stock No. 60177 = Radial Drilling Machine WEBO Type R4bR = Weight approx. 2,800 kg = Special price EUR 1,900 Stock No. 57432 = GILDEMEISTER Type GD 160 = Weight approx. 4,000 kg = Special price EUR 1,900 --- Many more machines for immediate export available. For example: 10 units welding equipment CLOOS, ESS, etc. 2x CNC lathe HITACHI SEIKI

Condition: used, total width: 1,300 mm, total length: 750 mm, total height: 2,900 mm, Empty weight: 1.000 kg - Documentation available: No - CE certificate present: No Lhjdpfx Ajyznbroiaof - Drive system: Conventional - Drive system: Gear drive - Table type: Fixed table - Table length [mm]: 700 - Table width [mm]: 600 - Drilling depth [mm]: 220 - Drilling capacity [mm]: 50 - Min. spindle speed [rpm]: 61 - Max. spindle speed [rpm]: 1239 - Transport dimensions: 750mm x 1300mm x 2900mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Carrier machining Lsdov Iamzopfx Aiaohf

Condition: new, Year of construction: 2006, bore capacity in steel (diameter) 35 mm throat 280 mm bore stroke 150 mm spindle taper MT MK 4 Lhsdpfjy Ehwzox Aiaof table-size 550 x 400 mm spindle turning speed - stepless 80 - 2800 U/min feed range - boring 0,1 / 0,2 / 0,3 mm/U voltage 400 V total power requirement 1,3 / 2,3 kW weight of the machine ca. 365 kg dimensions of the machine ca. Höhe 2,05 m - Serial-No.: 186367 - ausgezeichneter Zustand! - Gewindeschneideinrichtung Gewindeschneidleistung max. M30 - polumaschaltbarer Motor Stufe 1: 80 - 1400 U/min Stufe 2: 160 - 2800 U/min

Condition: used, bore capacity in steel (diameter) 40 mm threading bis M 30 throat 330 mm bore stroke 180 mm 4 speeds 60 - 765 U/min table-size 720 x 360 mm total power requirement 2,6 / 3,2 kW Lhedjyzty Tepfx Aiajf weight 350 kg dimensions 720 x 1100 x 2050 mm Equipment: - automatic feed - infinitely variable speed - thread cutting device - adjustable drilling depth stop - coolant device - spindle protection - drill chuck

Condition: new, Year of construction: 2020, bore capacity in steel (diameter) 40 mm throat 220 mm bore stroke 120 mm spindle taper MT 4 spindle turning speed range 105 - 1257 U/min no. of turning speeds 8 Stufen table surface area 400 x 320 mm base plate 390 x 650 mm voltage 400 V / 50 Hz total power requirement 1,1 / 1,8 kW weight of the machine ca. 0,3 t range L-W-H 2,1 x 1,0 x 0,7 mm Lodpjy Erwlsfx Aiajhf with quick-action drill chuck 3-16 mm, drill chuck protection, work table can be rotated, swiveled and height-adjusted, coolant device, lighting, right/left spindle rotation, mechanical depth stop,