Used Heavy Drill Machine for sale (67,392)

Condition: used, Box column drilling machine WEBO Series- No 132 Machine No: 9 Drilling capacity 50 mm Spindle cone MK 5 - long quill throat 430 mm spindle stroke 280 mm Height adjustment of drill head 500 mm Table size Ø 725 mm Distance between drill spindle and table max. 740 mm Distance between drill spindle and clamping surface on machine base max. 1240 mm Spindle speed 55-820 rpm Feed rate level 1 0.13 - 0.2 - 0.27 - 0.4 mm/rev. Feed rate stage 2 0.6 - 0.83 - 1.17 - 1.8 mm/rev. Column diameter 300 mm Motor power 2.8 / 3.6 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator - Manual drill head height adjustment via hand crank, clamping with clamping screws Todpfx Aneqa Txqeljb - Rotatable drill table with mechanical clamping - Table height adjustment via hand crank - Clamping surface on machine base 600 x 550 mm Top height of drill head 3020 mm Overall height drill head bottom 2520 mm Space requirement L x W x H 1400 x 780 x 2520 mm Weight 1600 kg good condition

Condition: used, Column drilling machine ALZMETALL, type AB 3 ESV Machine no. 15967, year of manufacture 1977 Drilling capacity 32 mm Spindle mount MK 3 – short quill Distance from spindle nose to table 545 mm (short quill) Distance from spindle adapter to table 395 mm (MK adapter) Overhang 290 mm Quill stroke 160 mm Table size Ø 545 mm Column diameter 220 mm Spindle speed 55 – 1450 rpm, continuously variable Motor power 1 / 1.6 kW Power connection 380 volts, 50 Hz Tedpfxsharwvj Anljb - Spindle speed controlled via 2 gear stages, 2 motor speeds, and continuously variable via a variator gearbox - Pre-selection stage for high torque at low speeds - MK adapter from MK3 to MK4 - Automatic feed 0.1 - 0.2 - 0.3 mm/rev - Rotatable drilling table - Table height adjustment via hand crank - Heavy machine base with machined workpiece support surface (not original Alzmetall) - Lighting for the work area Space requirement L x W x H 1150 x 650 x 2000 mm Weight 850 kg Good condition

Condition: used, functionality: fully functional, mileage: 4 km, power: 35 kW (47.59 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 60 l, color: green, overall weight: 5,200 kg, empty load weight: 5,200 kg, operation weight: 5,200 kg, mast type: duplex, Year of construction: 2023, operating hours: 950 h, platform length: 6,500 mm, transport length: 2,240 mm, transport width: 44,145 mm, transport height: 2,315 mm, Equipment: hammer hydraulics, hydraulics, rubber tracks, The MW1600-TX3 pile driver with Automatice Leveling, is a versatile and high-performance machine, designed for efficient pile installation in construction, solar farms, guardrails, and infrastructure projects. With its powerful hammer, flexible mast movement, and operator-focused design, the MW1600TX-3 provides superior control and precision, even in challenging terrains. 90-Degree Rotating Platform: The upper body platform with the mast can rotate 90 degrees, allowing for precise pile placement without repositioning the entire machine. Tedpfx Anszwm Elolsb 15-Degree Mast Tilting: The mast can tilt 15 degrees left and right, providing greater flexibility on uneven or sloped terrains.

Condition: new, functionality: fully functional, mileage: 4 km, power: 35 kW (47.59 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 60 l, color: green, overall weight: 4,750 kg, empty load weight: 4,750 kg, operation weight: 4,300 kg, mast type: duplex, Year of construction: 2025, transport length: 3,820 mm, transport width: 1,980 mm, transport height: 2,365 mm, Equipment: hammer hydraulics, hydraulics, rubber tracks, The MW1200 pile driver is a high-performance and heavy-duty machine designed for efficient and precise pile installation in a variety of construction applications. With its powerful hammer, extended mast height of 6.1 m, and adjustable settings, the MW1200 is ideal for solar farms, fencing, guardrails, and infrastructure projects. Todjx Tg Dpspfx Anlsb

Condition: new, functionality: fully functional, mileage: 4 km, power: 35 kW (47.59 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 60 l, color: green, overall weight: 4,350 kg, empty load weight: 4,350 kg, operation weight: 4,300 kg, mast type: duplex, Year of construction: 2025, platform length: 4,500 mm, transport length: 2,950 mm, transport width: 2,280 mm, transport height: 2,550 mm, Equipment: hammer hydraulics, hydraulics, rubber tracks, The MW1000 pile driver is a high-performance, versatile machine designed for efficient and precise pile installation in various solar park, guardrail, vineyard, and construction applications. Tedpjx Tf R Uefx Anlob

Condition: new, functionality: fully functional, mileage: 4 km, power: 45 kW (61.18 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 60 l, color: green, overall weight: 5,200 kg, empty load weight: 5,200 kg, operation weight: 5,200 kg, mast type: duplex, Year of construction: 2025, platform length: 6,500 mm, transport length: 2,240 mm, transport width: 44,145 mm, transport height: 2,315 mm, Equipment: hammer hydraulics, hydraulics, rubber tracks, The MW1600-TX5 pile driver is a versatile and high-performance machine, designed for efficient pile installation in construction, solar farms, guardrails, and infrastructure projects. With its powerful hammer, flexible mast movement, and operator-focused design, the MW1600TX-5 provides superior control and precision, even in challenging terrains. Tsdpfx Anjx Tg Nxjlsb 90-Degree Rotating Platform: The upper body platform with the mast can rotate 90 degrees, allowing for precise pile placement without repositioning the entire machine. 15-Degree Mast Tilting: The mast can tilt 15 degrees left and right, providing greater flexibility on uneven or sloped terrains.

Condition: new, functionality: fully functional, mileage: 4 km, power: 35 kW (47.59 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 60 l, color: green, overall weight: 4,800 kg, empty load weight: 4,800 kg, operation weight: 4,300 kg, mast type: duplex, Year of construction: 2025, platform length: 4,700 mm, transport length: 3,820 mm, transport width: 1,980 mm, transport height: 2,365 mm, Equipment: hammer hydraulics, hydraulics, rubber tracks, The MW1000-TX5 pile driver is a versatile and high-performance machine, designed for efficient pile installation in construction, solar farms, guardrails, and infrastructure projects. With its powerful hammer, flexible mast movement, and operator-focused design, the MW1000TX-5 provides superior control and precision, even in challenging terrains. 90-Degree Rotating Platform: The upper body platform with the mast can rotate 90 degrees, allowing for precise pile placement without repositioning the entire machine. 15-Degree Mast Tilting: The mast can tilt 15 degrees left and right, providing greater flexibility on uneven or sloped terrains. Tsdpfx Aox Tg Etjnljb

Condition: ready for operation (used), Year of construction: 1965, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,150 mm, spindle speed (max.): 6,000 rpm, table load: 6,000 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 1,600 mm Travel range, Y-axis: 1,200 mm Travel range, Z-axis: 1,150 mm Spindle speed: 20–6,000 rpm Work table: 1,200 × 1,400 mm Table load: max. 6 t Please note the following: Todpfx Anszuzpaelob The height and weight of the asset must be taken into account when selecting the transport vehicle. There is no loading dock on site. However, a forklift or an overhead crane is available for loading. If the asset is not collected on time, a storage fee of €20.00 per lot and per day (or part thereof) will be charged. The fee must be paid before collection. The sale is made without any warranty or guarantee. The information on the technical data is based on the original offer. No liability is accepted for typographical or measurement errors. In case of doubt, please compare the information with the provided photos or inspect the item on site before the auction ends.

Condition: good (used), functionality: fully functional, fuel type: electric, Core drilling unit / core drilling machine Manufacturer: HILTI with core drilling stand with the core drilling bits shown in the picture with extension, etc. Tedpfx Aozw Uz Uonleb Pickup or shipping available! Both options are possible!

Condition: excellent (used), Year of construction: 2015, bore capacity in steel (diameter) 40.0 / 50.0 mm throat 300 mm bore stroke 160 mm turning speeds 200 - 3200 U/min table: 615 x 430 mm bore spindles - Morse Taper 4 Kurzspindel MK column diameter 145 mm feed 0.1-0.2-0.3-0.4 mm/U distance spindle /table 147 / 688 mm engine output 1.8 / 2.9 kW weight 450 kg Current list price: approx. 20.000 euros Special price available upon request Tedpfezw N Ehex Anljb Features: - Robust column drill press * Drive: V-belt - VARIO - Automatic spindle feed * with electromagnetic feed clutch * 4 feed speeds: 0.1-0.2-0.3-0.4 mm/U * with electric cross-handle control - swivel work table * 1 station clamping table with 2 T-slots * 1 station with ALZMETALL vise - stepless speed adjustment - Digital speed display - Adjustable drilling depth stop - Pole-reversible drive motor - Clockwise rotation of the drill spindle - Main switch Emergency Stop button - User manual (PDF)

Condition: used, total width: 1,400 mm, total length: 1,000 mm, total height: 2,700 mm, Colour: Green Empty weight: 1.500 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Drive system: Gear drive - Power [kW]: 3 Tedszwc Sbopfx Anlob - Table type: Fixed table - Table length [mm]: 650 - Table width [mm]: 540 - Drilling depth [mm]: 280 - Drilling capacity [mm]: 40 - Reach [mm]: 315 - Tool holder: MK4 - Main spindle power [kW]: 3.0 - Min. spindle speed [rpm]: 1 - Max. spindle speed [rpm]: 1000 - Options: Tapping function, Drill unit feed - Transport dimensions: 1000mm x 1400mm x 2700mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, *VILAR LASSEUR VL 315 GRINDER - 1992 - Carbide Tool Sharpening* French VILAR Chatellerault grinder, Type *VL 315* - No. *315.256* - Date: *06/29/92* *Complete equipment:* - Cross table with carriage + swivel table for workpieces - Universal, inclinable tool holder - Long arm for lathe tool holder / carriage tool - Diamond grinding wheel, housing, coolant system - Remote control box, emergency stop button - Articulated lighting lamp - Original green Vilar sheet metal base 400V - In working condition, from a precision engineering workshop On a pallet - Approx. 350 kg - Easy to transport Tsdpfx Anezxt Hfjlob Video available upon request.

Condition: ready for operation (used), functionality: fully functional, Brierley Universal Automatic Drill Grinder Tsdpfszlhlpox Anlsb Model: ZB 32 Capacity: 2.5-32mm With Cams

Condition: excellent (used), Year of construction: 1998, Hofmann HT 200 U frame dowel and elongated hole drilling machine with adjustable angle. Special drilling machine for staircase construction, window construction and universal applications through pneumatic height adjustment. Angled dowel drilling and picket drilling can be easily performed using the rotating drilling unit. Motor with pole change, two speeds Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm Motor start with a practical handle switch Precision chuck with two inserts, 16 mm and M10 thread Table size approx. 1100 x 240 mm Linear laser for precise positioning of the workpiece Tjdsyfta Topfx Anleb Drilling unit can be rotated 65 degrees to the left and right Pneumatic adjustment of the machining height, dowel drilling on two levels without retooling The desired drilling heights can be set for each drilling level using a handwheel and digital counter; switching then takes place pneumatically from the front Cross adjustment approx. 320 mm, stepless or in a 12 mm grid Drilling stroke approx. 200 mm 2 pneumatic workpiece clamps, can be positioned at the front and rear of the table 2 swiveling workpiece supports 2 side stops, can also be used as a front support Undercarriage Dust extraction connection 80 mm 4 used but good drills 9, 12, 16, 19 mm Few paint spots have been touched up, very good condition, see original photos. A used swiveling elongated hole drilling machine in this condition is rarely available. CE marking Operating manual Dimensions approx. 1200 x 1200 x 1200 mm (L x W x H), weight 310 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are stored in our warehouse, see "other offers from this supplier".

Condition: ready for operation (used), functionality: fully functional, total width: 355 mm, total length: 381 mm, total height: 1,270 mm, grinding wheel diameter: 203 mm, Dormer Automatic Drill Grinder Tjdpfx Ajzlg Szsnlsb Model: 108

Condition: good (used), functionality: fully functional, drilling depth: 600 mm, workpiece weight (max.): 2,000 kg, travel distance X-axis: 750 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 3,000 rpm, drill diameter: 35 mm, drill spindle length: 600 mm, spindle mount: MK 2, spindle stroke: 600 mm, number of spindles: 1, Equipment: rotational speed infinitely variable, Driling capacity: Ø 35 mm Driling depth: 600 mm Todpfx Anezu Sp Rolsb X-axis: 750 mm Y-axis: 630 mm Z-axis: 300 mm Spindle speeds: 0 - 3000 rpm Tabel size: 1100 x 650 mm Load on table: 2000 kg max Turning table: 360° Controller: Degen AE30 Including: - Cabinet + pallet with drills - Coolingunit - Machine manuals Country of origin: Germany Motor power: 11,2 kVA Machine LxWxH: 350 x 120 x 175 cm Machine weight: 1300 kg

Condition: new, bore capacity in steel (diameter) 32.0 mm threading max. M 24 throat 265 mm bore stroke 150 mm morse taper 3 MK Tsdpfx Aoxabxrenljb turning speeds 320 - 1820 U/min table-size 332 x 332 mm T-slots 14.0 mm column diameter 100 mm 400 x 380 mm distance spindle/base plate max. 735 mm voltage 400 V total power requirement 2.2 kW weight 246 kg range L-W-H 520 x 920 x 1380 mm Description: - robust table drilling machine with thread cutting device - very smooth running thanks to pulleys made of gray cast iron - drive: V-BELT - quality ball bearings ensure a high concentricity of the spindle - large drilling table with diagonally running T-slots - drilling table height adjustment via rack - thread cutting device - powerful and high-torque aluminum motor in accordance with IP 54 - standard with T-slots in the ground base plate - ergonomic handles for comfortable working - foldable drilling spindle guard - emergency stop button at the front - manual drilling depth adjustment - control cabinet - left with main switch

Condition: used, Year of construction: 1998, total width: 1,100 mm, total length: 1,700 mm, total height: 1,150 mm, Colour: White Empty weight: 1.100 kg - Year: 1998 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 980223 - Table length [mm]: 245 - Table width [mm]: 735 - Number of spindles [pcs]: 8 - Spindle diameter [mm]: 16 - Max. spindle speed [rpm]: 17000 - Distance between spindles [mm]: 50 - Workpiece clamps [pcs]: 2 - Workpiece support/Guide: Table - Drills included: Yes - Voltage [V]: 415 - Fuse [A]: 16 - Power [kW]: 7.5 - Transport dimensions: 1700mm x 1100mm x 1150mm (l x w x h) - Transport weight [kg]: 1100kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Tedpfx Anszvx N Hslob Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2009, Used Machine Year of manufacture: 2009 Condition: Overhauled by a Hirzt specialist Description: The machine’s design is very simple. The workpiece is loaded into the machine. A quickly adjustable stop with pneumatic locking centers the workpiece in the machine. After a foot switch is activated, the workpiece is pneumatically clamped and automatically fed to the drilling unit (30 m/min). The vertical spindles drill from below, so that the resulting chips do not remain on the workpiece, as they would in a machining center. The horizontal spindles operate on two sides of the workpiece. The workpiece can be of any length, as it is guided to the drilling unit (= X-axis). The drilling spindles can be freely programmed individually or in groups and move along the Y-axis. The drilling depth and the horizontal drills are controlled by the Z-axis. After all holes have been drilled, the workpiece is conveyed back to the infeed side or, if desired, to the outfeed side. While in conventional machining centers the workpiece is clamped using a vacuum and the vacuum clamps must be adjusted to the workpiece size, this step is completely eliminated with the 3-axis-controlled point-to-point drilling machine. Advantages: - High machining speed - Good value for money - Compact footprint All drilling operations can be performed in a very small space: - Row drilling - Structural holes - Hardware holes - Cabinet joint holes Features: - Welded machine frame - Drilling head with 7 vertical drilling spindles and 1 horizontal double drilling spindle - 3-axis control: - X: NC-controlled plate feed via “overlapping” pneumatic clamping jaws - Y: NC-controlled drill head movement - Z: NC-controlled drilling spindle depth adjustment - TRK precision guides - Pneumatic split pressure beam above the drilling unit - Pneumatic roller hold-down devices in the feed area - Pneumatic clamping jaws for transport - Pneumatically lockable side stop with rollers - Control via Windows XP-based PC (1 GB flash memory) - 8?? color screen - Alphanumeric multifunction keyboard including mouse - Network card - USB interface Technical Specifications: Tjdpfjzwg Tiex Anleb - Number of controlled axes: 3 - Maximum panel width: 1,000 mm - Maximum drilling width: 800 mm - Maximum feed rate (X-axis): 30 m/min - Drill speed: 3,400 rpm - Maximum drill bit diameter: 35 mm - Maximum total drill bit length: 70 mm - Drill bit chuck: 10 mm shank with clamping surface - Power rating: 2.5 kW - Exhaust port diameter: 100 mm - Required pressure: 6 bar - Working height: 900 mm - Fold-out roller support on the feed side, 500 x 750 mm Dimensions: 1,650 x 1,920 mm Availability: available shortly Location: North Rhine-Westphalia

Condition: used, Year of construction: 1994, bore capacity in steel (diameter) 35 mm throat 300 mm bore stroke 180 mm turning speeds 55 - 1450 U/min taper MK 4 column diameter 145 mm total power requirement 2,2 kW weight 500 kg dimensions 800 x 1000 x 2000 mm Features: - Heavy-duty pillar drill - Infinitely variable speed control (V-belt) - Automatic spindle feed * with electromagnetic engagement - Pole-changing motor - Right/left rotation of the drill spindle Tjdpfxszu Tk Ns Anlsb - Fixed drilling depth stop - Machine table with 2 T-slots * height-adjustable via hand crank - Coolant system - Machine vise - Drill chuck - Emergency stop

Condition: used, Year of construction: 2021, Bauer Maschinenbau Bohrmax Z40, Section Drill & Milling Machine, Overall Table Length 4350mm, 4 Sections 1050mm Long, Penta NC V2 Programme Control, 10 Tool ATC, CAT 40 Spindle, 11kw Power, Travels X Axis = 4000mm, Y Axis = 580mm, Z Axis = 700mm, Drilling Capacity 3 - 40mm, Drilling Speed Range 140 - 2300rpm, Rapid Traverse X = 24m/min, Y & Z = 7.5m/min, Table Width 560mm, Underside of Tool Holder to Table 700mm, Motor 7.5kw. S/No. 21-0156 (2021) Todpfx Aezr Ix Aonlob Location: These lots are located in Burton-on-Trent, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: ready for operation (used), Year of construction: 1994, overall weight: 7,000 kg, arm length 2150 mm, drilling capacity 80 mm Todpfsyzq Dpsx Anlob weight 7000 kg

Condition: ready for operation (used), Year of construction: 1975, arm 1200MM stroke head on bench 1400MM universal head Tjdpfx Aovm Akgenljb portable radial

Condition: used, Year of construction: 2023, operating hours: 3,300 h, functionality: fully functional, machine/vehicle number: L0098, table height: 1,000 mm, table width: 195 mm, total width: 1,500 mm, total length: 3,500 mm, total height: 2,150 mm, spindle speed (min.): 750 rpm, table length: 3,250 mm, spindle speed (max.): 6,000 rpm, number of spindles: 8, rotational speed (min.): 750 rpm, rotational speed (max.): 6,000 rpm, drill chuck size: 11 mm, workpiece weight (max.): 1,200 kg, operating pressure: 8 bar, air demand: 15 m³/h, KS Maschinenbau - KS LBM DB 04 DR For sale is a row drilling machine, also known as a strip drilling machine. The row drilling machine KS LBM DB 04 DR is designed for drilling strips and guide rails made of aluminum, plastic, and wood, as well as roller shutter end strips (for wood profiles up to 3 meters long and up to 90 mm in height). The machine is equipped with 4 pairs of three-phase drilling units. Four holes each can be drilled simultaneously or with a time delay from above and below. The spacing between the drilling units is manually adjusted using an indexing system for various distances. The index holes are fitted with drill bushings into which the hardened index pins are centered. The offered strip drilling machine comes with 8 drill heads (4 oriented downwards, 4 upwards). Tedoywtxbjpfx Anlsb We have used this machine in our workshop to drill wooden fence profiles. It has provided us with reliable service over the past few years. As our customer is switching to plastic profiles, we no longer have use for it. This machine configuration includes 8 extraction adapters for chip extraction, along with hoses and a manifold for customer-side extraction. Further videos and technical data about this machine series can be found at the following link: ksschulten.com/en/products/drilling-machines/strip-drilling-mach ine-ks-lbm/video.html The machine's operating manual is of course still available.

Condition: like new (used), Year of construction: 2025, GANNOMAT "JUNIOR 323" FRAME DOWEL AND SLOT MORTISING MACHINE Complete in standard configuration as per price list 01/22/D with: - Precision collet chuck for ER 40 collets Ø 3–26 mm, including collets Ø 10 / 13 / 16 / 20 - Motor 1.5 kW, 2800 rpm - Positioning via digital counter - Pneumatic 2-level positioning adjustment (0–100 mm) - Max. drilling depth: 150 mm - Precision indexing rail with 12 mm pitch, featuring: - Center detent and lateral adjustment 320 mm - 2 pneumatic safety clamping cylinders - Complete fence system consisting of: • 1 center stop and 1 stop for oversized frames • 1 round stop bar approx. 850 mm long (can be mirrored from left to right) • 2 flip stops - Tiltable slot mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) - Extraction hood Ø 80 mm, dust-tested - Central mitre stop 45° - Pair of auxiliary workpiece supports, pivotable (left and right) - Drill head holder - 3-spindle drilling head, 32 mm pitch (can be rotated 90°) - Chassis with 4 wheels for easy machine movement Availability: Short-term – immediately – Tedpfexdttiox Anlob