Used Height Gauge for sale (36,535)

Condition: excellent (used), Year of construction: 2016, TECHNICAL DETAILS Control System CNC control: FANUC Professional 5 Axes and Travel Ranges X-axis: 550 mm Y-axis: 1,000 mm Z-axis: 500 mm C-axis: 360°, continuous rotation A-axis: 150° (+30° / 120°) C-axis measuring system: Rotary encoder A-axis measuring system: Rotary encoder Feed Rate and Rapid Traverse Feed rate X-axis: 32 m/min Feed rate Y-axis: 40 m/min Feed rate Z-axis: 40 m/min Rapid traverse X-axis: 48 m/min Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 50 m/min Rapid traverse A-axis: 18 m/min Rapid traverse C-axis: 18 m/min Work Table and Workpiece Nwedj Aayfhopfx Abujn Table dimensions: 500 mm Maximum workpiece size: 650 × 500 mm Workpiece weight: max. 350 kg Spindle Spindle speed: max. 14,000 rpm Tool System Tool holder: HSK-A63 Tool magazine: 323 positions Tool changer: Double gripper Tool diameter: max. 70 mm Tool diameter with adjacent occupied positions: max. 140 mm Tool length: max. 300 mm Tool weight: max. 8 kg Operating Hours Total operating time: 63,813 h Spindle running time: 30,592 h Machine Dimensions and Weight Length: 3,550 mm Width: 2,900 mm Height: 3,200 mm Machine weight: 15,700 kg EQUIPMENT Electronic handwheel Chip conveyor Measuring probe

Condition: used, Year of construction: 2021, Overview This Robopac Helix 4 EVO pallet winder was built in 2021, with less than 500 operating hours - technically close to new. The arm carries the pre-stretch carriage around the stationary pallet, so the load itself is never turned - the configuration for unstable, fragile or heavy loads at high output (capacity below). Built as a stand-alone unit. Nwjdpfszzz Rdex Abusn Technical data - Manufacturer: Robopac - Model: Helix 4 EVO - Year of manufacture: 2021 - Machine type: automatic rotating-arm stretch wrapper (pallet winder) - Operating hours: less than 500 h - Capacity: 82 pallets/h (11 wraps, 1,000 mm H), 73 (15 wraps, 1,600 mm H), 64 (19 wraps, 2,000 mm H) - Wrapping cycle time: approx. 36.3 s at H 1,600 mm, 15 wraps (conveyor excluded) - Pallet sizes: 800 x 1,200 mm and 800 x 600 mm; industrial pallets and quarter pallets can be wrapped as well, centred on the conveyor - Load height: 1,000 - 2,000 mm incl. pallet; mechanical max. 2,550 mm incl. pallet and conveyor - Load weight: 100 - 1,200 kg - Conveyor speed: 15 m/min - Machine height: 4,721 mm; hall height from 7,000 mm - Pre-stretch: PGSA carriage, electronically adjustable 100 - 400 % - Stretch film: LDPE / LLDPE, 17 - 23 µm, roll width 500 mm, max. dia. 250 mm, core 76 mm, max. weight 16 kg - Control: Siemens SIMATIC S7-1500 PLC, TP700 7" colour touch panel - Wrapping programs: 15, expandable to 64, 12 control steps per recipe, 4 password-protected access levels - Power supply: 400 V / 50 Hz, TN-S, control voltage 24 VDC - Compressed air: 6 bar, dry and oil-free - Documentation and HMI languages: German / English / Italian Equipment - Rotating arm on a four-column steel structure, geared slewing ring with central lubrication - Patented PGSA pre-stretch carriage with load cell, film tension corrected at the corners, set from the display - Automatic film clamping, cutting and impulse-sealing unit, spring gripper with 300 mm horizontal stroke - Easy Lock tilting roller and roping device for narrowing the film web from below - Pantograph top press unit for load stabilisation during wrapping - Photocell for automatic pallet-height reading - Integrated roller conveyor, pallets loaded and unloaded by forklift - SEW IP55 geared motors for arm rotation and carriage lift, FESTO pneumatic components - Glazed enclosure with Sick M4000 light curtains, 30 mm resolution, 1,800 mm field height - Enlarged illuminated switch cabinet and a separate, independent operator panel - TPM package: centralised lubrication points, gauges with red/green rings, maintenance intervals on the display - Troubleshooting in the HMI with fault location and remedy - R-Connect remote connectivity with cloud portal for production data and teleservice - Documentation printed and on USB: manual, CE declaration, diagrams, spare parts catalogue, layout Condition Used - virtually new, dismantled and professionally packed for transport; photographs show it assembled before dismantling. Sold without warranty. Availability Immediately. Location: Germany. Handed over dismantled and packed (EXW).

Year of construction: 2016, condition: ready for operation (used), functionality: fully functional, power: 100 kW (135.96 HP), conveyor belt length: 4,000 mm, product height (max.): 100 mm, machine/vehicle number: 5-199, TECHNICAL DETAILS Freezing capacity: 100 kW / 29.41 tons Net belt width: 1,250 mm Freezing belt length: 4,000 mm Maximum product height: 100 mm Adjustable dwell time: 0.5–20 min Number of high-speed fans: 6 MACHINE DETAILS Nwsdpfsz I Ticjx Abujn Voltage: 380–500 V Frequency: 50–60 Hz Power consumption: 5 kW EQUIPMENT Stainless steel construction Stainless steel net belt 6 adjustable internal high-speed fans Stainless steel control cabinet Siemens PLC Siemens Simatic touchscreen HMI

Condition: excellent (used), Year of construction: 2010, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General Information Manufacturer: TRUMPF Model: TruLaser 5030 fiber (L41) Machine Type: Laser cutting machine Year of Manufacture: 2010 Available: End of October 2026 Weight: 12,000 kg Working Area Working area X/Y/Z: 3,000 × 1,500 × 115 mm Nwedpfxjz S Egis Abuon Speed: max. 300 m/min Accuracy: 0.05 mm Laser Laser: TruDisk 3001 solid-state laser Laser power: 3 kW Laser operating time: approx. 35,000 h Cutting Capacities Sheet thickness steel: max. 20 mm Sheet thickness stainless steel: max. 15 mm Sheet thickness aluminum: max. 15 mm Control and Operation Control system: Siemens SINUMERIK 840D SL Touch color screen: 17 inches Machine Dimensions Length: 9,950 mm Width: 4,600 mm Height: 2,400 mm Costs IT costs: 3,000 EUR EQUIPMENT Enclosed machine frame with integrated laser unit Motion unit for highly precise machining Torque drive in combination with linear direct drives Enclosed, fiber-guided beam entry Machine cooling unit, water-air Integrated control cabinets with internal lighting Common main switch for machine and laser Automatic pallet changer in the longitudinal direction Longitudinal conveyor belt Power supply for the TruDisk via the machine Work area lighting Position laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Laser cooling unit, water-air Excitation via pump diodes with long service life Laser power control Laser logbook function Universal cutting unit with fully adaptive lens system Single-cut head strategy Protective glass against lens contamination ControlLine height control and sheet outer edge detection Workshop programming Fast reproduction Integrated technology data Automatic shutdown Programmable cutting gas and pressure selection FastLine FlyLine Remote service via the internet Diagnostic functions Integrated e-shop USB interface RJ-45 network connection CE marking Light barriers Multi-chamber extraction system Integrated compact dust extraction system Machine cladding with certified viewing window Door on the right Electric roll-up roof

Condition: new, Year of construction: 2026, pressing force: 400 t, DURENDUS 400 T Workshop Press – Single-Column Press – 1,600 mm clear width, 550 mm stroke The machine shown here has already been built and delivered to a customer. We can manufacture this machine for you very quickly – and are happy to consider individual options. This is a hydraulic workshop press for pressing, straightening, and assembly work in workshop and industrial environments. Options (on request): The options listed are based on realized customer projects and enable targeted adaptation of the machine to the specific application. The basic machine represents a functional standard design – in practice, it is usually expanded with additional equipment and configured according to the specific project requirements. * Tabletop with X-shaped T-slot 800 × 1,200 × 120 mm * Pressure adjustment * Lateral displacement of the press ram (1,000 mm) * Bending tool * Twist-proof cylinder with manual stroke adjustment * V-profile straightening support in combination with the tabletop * LED lighting * Foot switch * Cooling ===== Technical data + information: ==== General information * Design: Workshop press * Press force: 400 t (optionally adjustable) * Total weight: approx. 4,000 kg * Overall dimensions (W × D × H): 2,950 × 1,100 × 2,850 mm ==== Working area * Clear width: 1,600 mm * Open depth: 550 mm * Installation height: 250–900 mm (variable) ==== Table & Ram * Crossbeam usable width: 1,600 / 600 mm * Ram stroke: 400 mm * Cylinder diameter: Ø 360 mm * Piston rod: Ø 235 mm * Height adjustment: via chain mechanism ==== Speeds * No-load speed: 7.8 mm/s * Return speed: 13.7 mm/s ==== Hydraulics & Drive * Pump capacity: 48 l/min * Motor power: 22 kW * Hydraulic tank: 120 l * Pressure accuracy: ±5 bar * Hydraulic system: DUPLOMATIC ==== Control & Operation * Hand lever operation * Manual fine adjustment via hand lever * Connection: 400 V / 50 Hz * Total connected power: approx. 23 kW ==== Equipment * Height-adjustable crossbeams with bolt locking * Chain mechanism for table adjustment * Pressure gauge for pressure indication Nwjdpfx Abjy H Dn Esuon * Emergency stop switch * CE certification * Two-layer coating according to RAL ===== Pressing, unpressing, assembly work, straightening work, workshop applications, maintenance Workshop press, hydraulic press, single-column press, C-frame press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German Machinery Directives and European Machinery Directives (Directive 2006/42/EC), the EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all aspects of the national Brazilian safety guideline NR 12, which is based on these. Our strength lies in the construction of special machines and press automation. We distribute customized hydraulic presses at surprisingly affordable prices. The hydraulics of the presses mainly use components from leading European manufacturers.

Condition: new, overall weight: 48,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Reinforced design, air suspension with lift axle, axle load gauge for axle load, length of the upper deck approximately 4,400 mm including slope, length of the lower deck approximately 8,500 mm, loading height approximately 900 mm, for 2-axle and 3-axle semi-trailer tractors, kingpin adjustable, headboard, 16 x stake pockets in the outer frame, 32 x lashing points, ramp approximately 3,100 mm long, ramps with climbing strips on the outside, ramps for driving over on the gooseneck, further options available at an extra charge: last axle as a steering axle, warning signs + lighting and rotating beacon, widening to 3 m with outriggers, -- subject to printing errors, errors and changes, sample images --, more data under: !, More Details: ! Nodpfx Abe Adpkheuown

Condition: used, machine/vehicle number: 90540056, Year of construction: 2017, operating hours: 788 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,200 kg Lifting height: 2,500 mm Fork length: 1,150 mm MACHINE DETAILS Nodpfx Abez S Nwfjuewn Battery voltage: 24 V Battery capacity: 150 Ah Battery type: 2 PzB Dimensions & Weight Dimensions (L x W x H): 1,800 x 800 x 1,720 mm Own weight: 800 kg Service valid until: 07/2027 UVV certification valid until: 07/2027 Operating hours: 788 h EQUIPMENT Formerly a Jungheinrich full-service unit All dimensions are approximate values. No warranty is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 446

Condition: ready for operation (used), Granite – Measuring plate & height gauge TESA – Micro-Hite - Plate dimensions: 3000x1300x350 mm - 2 x tailstock centers / center height 250 mm Nwodpfe Aazamjx Abuen - Height gauge – TESA Micro-Hite / measuring range up to 600 mm Dimensions: L x W x H 3.3 x 1.4 x 1 meter / Weight approx. 3000 kg Errors and omissions excepted.

Condition: excellent (used), functionality: fully functional, Year of construction: 1992, machine/vehicle number: DN2216, Demag ELV Hall Crane, Portal Crane, Bridge Crane, incl. steel structure with floor-mounted control Dimensions of steel structure approx. 22.5 x 8.9m with 1x Demag bridge crane 3.2 tons - gauge 8.55m Payload/lifting capacity 3200KG, 3.2t Technical data of the system: Crane track/steel structure consisting of HEB280 beams (running rails) with 8 U200 supports. Beams were cut flush with the floor, as they were cast into the concrete. Length of steel structure approx. 22.55m Overall width (outer edge of steel structure) approx. 8.9m Overall height of crane approx. 4.75m Top of running rails approx. 4.3m Bottom of running rails approx. 4.0m Top of bridge approx. 4.75m Bottom of bridge approx. 4.33m Hook height approx. 3.6m Gauge approx. 8.55m Support spacing: See sketch (Left 6.75 + 6.75 + 7.8 - center to center) Nwjdpsz Tdbnjfx Abusn System will be delivered complete: Steel structure / supports made of U240, running rails HEB300 incl. power rail/power supply 1x single-girder crane with 3200kg Demag PLV wire rope hoist with floor-mounted control Crane is dismantled and immediately available The location of the item is 75053 Gondelsheim Very good condition, see pictures Shipping via freight forwarder or collection only by prior appointment

Condition: used, Year of construction: 1985, Working width 1350 mm Number of sanding units 3 st. VIET Wide-Belt Sanding Machine, Type Valeria 3CCT TM1350 ----- Sold on behalf of a client. The machine can still be viewed in operation for a short time! Machine No.: 30036022 Technical Specifications & Units ----- Working width: 1,350 mm Main drives: 3 separate electric motors located at the machine base to drive the sanding belts. Feed system: Perforated vacuum conveyor belt (vacuum bed) with an upstream rubberized infeed roller and a preceding roller table. Internal Unit Configuration: • 3 sanding belt stations. • Mechanical belt oscillation via upper tracking rollers. • Integrated pneumatic belt-cleaning blow-off systems (blow-off pipes located on the inner side of the units). • 1 unit equipped with a manually adjustable dial indicator/fine-adjustment mechanism on the sanding platen. Pneumatic Controls (upper control panel): • Pressure gauges and control valves for: belt tension (minimum tension), brake cylinders, belt oscillation, and internal pressure (for the sanding platen). Nsds Adfddjpfx Abuown • 3 separate toggle switches for the belt blow-off/air-jet systems (units 1, 2, and 3). Electrical Control Panel (right-hand control panel): • 3 analog ammeters to display the load on the sanding belt motors. • 1 analog voltmeter. • Digital height display/thickness setting. • Main switches for the individual units (belt 1, belt 2, belt 3). • Selector switch for feed direction (climb milling/down-cut vs. conventional/up-cut mode). Technical specifications according to the manufacturer – no guarantee!

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 52400 € 990.36 € 60 to 1250 mm 3 (Y1, Y2, X) 160 mm 1050 mm 450 mm 400 mm hydraulisch 200 mm/s 10 mm/s 110 mm/s 650 mm 500 mm/s 900 mm 104 mm 100 l 7.5 kW 2300 mm 1550 mm 2350 mm 4700 kg Standard accessories: 3 axes (Y1, Y2,X ) CNC control DT-15 - 2D grafic display 15" - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF AD-S COMPAIRED TO PBF: - more stroke, installation height and throat - higher approach and retraction speed of the top beam - higher backgauge speed - backgauge finger on double instead of single linear guide - more options available such as: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem design, other CNC controls ... Nodpfx Abowird Teuswn optional equipment: R-Axis R/Z1/Z2-Axis DBend, 3D CAD/CAM importing- and simulation program (step, iges and dxf file import) CNC Control SKY22 CNC Control Delem DA66 S CNC Control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option Quick Release Clamping

Condition: used, Zwick / Roell Universal testing machine / Material testing machine Zwick / Roell ProLine Z005 Universal Testing Machine 5 kN testing machine for tensile, compression, and material testing For sale is a used universal testing machine from the manufacturer Zwick / Roell. The machine is suitable for tensile tests, compression tests, material testing, component testing, quality assurance, research and development, and laboratory applications. Technical data Manufacturer: Zwick / Roell Type: ProLine Z005 / 5 kN ProLine Type of device: Universal testing machine / Material testing machine Year of manufacture: 2016 Made in Germany Maximum testing force: 5 kN Load cell: Zwick Xforce P Rated force of load cell: 5 kN Start of measurement, accuracy class 1: 20 N Start of measurement, accuracy class 0.5: 100 N Nominal measuring range: 0.06 mm Machine dimensions: approx. 917 x 439 x 1331 mm (W x D x H) Frame width: approx. 720 mm Installation width of frame: approx. 770 mm Testing space width: approx. 440 mm Machine weight: approx. 200 kg Weight of load cell: approx. 0.65 kg Mains connection: 230 V Frequency: 50 / 60 Hz Current consumption: 3.5 A Connection: 1L / PE / N Measuring module: DCSC Measuring range: 0.2 % to 165 % of the nominal measuring value Measurement value acquisition rate: max. 10 kHz Measuring input: Differential input Sensor supply: 10 V DC Strain gauge bridge resistance: 175 to 1200 Ω Connection type: 4- and 6-conductor technology Nominal sensitivity: 2 mV/V Connection thread for load cell: M28 x 1.5 Connection bolt: Ø 20 mm Dowel pin: Ø 8 mm Degree of protection of load cell: IP54 Load cell Type: Xforce P Rated force: 5 kN Working force max.: 150 % of Fnom Limit force: 150 % of Fnom Breaking force: 300 % of Fnom Limit transverse force: 100 % of Fnom Component height: 95 mm Installation dimension: approx. 72 mm Installation height: approx. 61 mm Diameter: 54 mm Equipment Zwick / Roell ProLine testing frame Xforce P 5 kN load cell DCSC measuring module Electronic force measurement Machine electronics on the side of the load frame PC system / testing software as shown in the pictures Accessories as shown in the pictures Application areas Tensile testing Compression testing Material testing Material characterization Quality assurance Incoming goods inspection Research and development Laboratory applications Condition Used Optical condition as shown in the pictures Scope of delivery 1x Zwick / Roell ProLine Z005 Universal Testing Machine 1x Xforce P 5 kN Load Cell 1x DCSC Measuring Module PC system / Software as shown in the pictures Accessories as shown in the pictures The table shown in the photos, as well as any other items not explicitly mentioned, are not included in the sale. Shipping or forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone. Nwsdpfx Abezfy Ivjujn

Condition: excellent (used), Catalog number: 8125 TECHNICAL DATA PLANER: - roller width 410mm - 3-knife roller - adjustable angle guide - table length 1800mm - both tables adjustable JOINTER: - max thickness of workpiece on the jointer 180mm - guard on the jointer roller – from above: - pawls - infeed roller, toothed - planing roller - outfeed roller, smooth – with horizontal drilling machine: - max tool diameter 16mm - max hole depth 120mm - max milling length 200mm Nwedpfxoz Rpl To Abujn - front/rear adjustment with drilling unit - table adjustment up/down and sideways - adjustable roller in the lower table - 2 feed speed options 8/12m/min - main motor 4kW CIRCULAR SAW: - max blade diameter 350mm - max cutting height (for a 300mm blade) 45mm - blade arbor diameter 30mm - blade adjustable up/down - cutting width with guide 350mm - cutting width on the carriage 500mm - table dimensions 1230x530mm - with carriage + miter gauge - blade guard - motor power 3kW MILLING MACHINE: - spindle 30mm - spindle adjustable up/down - spindle height 80mm - guide - rotation right/left - dust extraction nozzle diameter 120mm - dimensions L/W/H 2800x2300x1050mm - weight approximately 1000kg FEATURES – with drilling machine – guard on the jointer roller – very good condition, used machine Net price: 16900 PLN Net price: 3930 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 578 034 05, Bobst Autoplatine SP 104 ER Year: 2001 Serial Number: 0578 034 05 / 0531 021 05 Automatic die cutter for paper and cardboard converting, processing sheets up to 1,040 x 740 mm at up to 8,000 sheets per hour. The press is fully equipped with a waste stripping station and a blank stack delivery station with automatic non-stop and pallet changing device. Operation is controlled via the Bobst C.U.B.E. control system with an additional panel at the feeder, supported by Bernoulli sheet braking at the stripping and delivery stations. Equipment Machine Platform with safety barrier Centerline system for quick job changeovers Electronic sheet travel control Adjustable centerings at stripping and delivery stations Anti-static stainless steel plate Sheet synchronization with machine stopped 4 front lays, adjustable in pairs, with front register control Pull guide (OS) with side register control Nwodj Afwrvspfx Abujn Pull guide (OOS) with side register control Double sheet detector Feed belt slow-down device Support plates at platen entry Sheet hold-down device Upper frame with manual lifting device Upper transport for paper, paperboard and corrugated board up to 4 mm 4 laterally guided transport belts Platen Press Gripper reopening device Die cutting without gripper margin Equipment centering and locking Locking of the chase against the upper beam Cutting force measurement with strain gauge Synthetic supporting plate, 22.5 mm Upper chase with quick locking, fixed bottom plate Compensating plate, 4 mm ground steel Adjustable supporting plate centerings, ±0.9 mm Lowering of the chain guides Waste Stripping Station System with 3 pull-out frames 2x upper pull-out frame 2x lower pull-out frame Central quick locking pull-out frame Blank Stack Delivery Station Automatic binder sheet inserter Gripper opening device for full sheet stacks Automatic non-stop device Special non-stop rack for small boxes below 140 mm Pile raising security Waste / skeleton removal apron Braking brush of the waste skeleton Front trim ejection control by photocells 2x upper pull-out frame Lower pull-out frame Pallet changing device with conveyor Technical Details Parameter Value Production Rate 8,000 sheets/hour Max Sheet Size 1,040 x 740 mm Min Sheet Size 400 x 350 mm Max Die-Cutting Size (with gripper margin) 1,040 x 725 mm Max Cutting Die Size 1,050 x 746 mm Convertible Stock Paper from 80 g/m², board up to 2,000 g/m², corrugated up to 4 mm Parameter Value Max Platen Pressure 2.5 MN (250 t) Max Pile Height Feeder 1,815 mm (non-stop 1,515 mm), delivery 1,430 mm Max Pallet Size 1,200 x 800 mm Compressed Air min. 6 bar; without central supply, a compressor of 80 m³/h with 500 l tank is required Net Weight 20,000 kg Electricity Main motor 11 kW, total connected load max. 25 kVA still connected to power

Condition: used, machine/vehicle number: H2X393V02496, Year of construction: 2019, operating hours: 17,217 h, load capacity: 3,500 kg, lifting height: 4,450 mm, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,500 kg Lifting height: 4,450 mm Fork length: 1,200 mm MACHINE DETAILS Mast type: Duplex mast Operating type: LPG Nwsdpfxjz Nwuge Abusn Dimensions & Weight Dimensions (L x W x H): 4,100 x 1,350 x 2,964 mm Self-weight: 4,900 kg UVV certificate valid until: 04/2027 Next service due in: 388 hours Operating hours: 17,217 h EQUIPMENT Former Linde full-service unit Free-lift mast without center hydraulic cylinder Multi-directional fork positioner Side shifter Full cab Radio Heater Windshield wiper LED work light (front) LED work light (rear) Safety light (rear) Safety light (side) Comfort seat with lumbar support Seat heating Display of the tilt angle LPG gas exchange cylinder Hydraulics: 3rd + 4th valve All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 t is possible with a large forklift on site. Loading is carried out at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 t and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 166

Condition: good (used), Year of construction: 1987, Press force 1250 t Bending length 15000 mm Upright spacing 10160 mm Control system CNC 10 graphics Throat depth 770 mm Table length 15000 mm Machine weight approx. 230 t Required space approx. 17000 x 5400 x 5900 mm Additional information: - Press force: 1,250 t - Bending length: 15,000 mm - Control: CNC 10 graphics - Number of controlled axes: at least 10 - Upright spacing: 10,160 mm - Throat depth: 770 mm - Table length: 15,000 mm - Dimensions: 17,000 mm x 5,400 mm x 5,900 mm - Weight: approx. 170 t Equipment: Nwsdpfx Abo Afxmzjuen - Crowning device - CNC 10 graphic control - Hydraulic upper tool clamping - Multi-operator functionality - Increased speeds - Automatic, height-adjustable rear sheet gauge - Draw cushion device - Horn length on each side: 2,200 mm

Condition: new, functionality: fully functional, power: 18.8 kW (25.56 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 2,470 kg, lifting power: 1,200 kg/m, lifting height: 2,489 mm, tire size: 31x15,5x15 AS, tire condition: 100 %, axle configuration: 2 axles, emission class: euro5, digging bucket width: 1,600 mm, Year of construction: 2025, fuel: diesel, load capacity: 1,200 kg, Equipment: additional headlights, all wheel drive, cabin, head guard, pallet forks, standard shovel, trailer coupling, The H&R 2512 compact loader offers you more enjoyment while working for little money. With its small turning radius, the H&R 2512 wheel loader can also be used in small areas. Thanks to the comfort cabin, the H&R 2512 wheel loader is comfortable and also suitable for inclement weather. Its 4-cylinder engine with 25 hp is particularly fuel-efficient and powerful. With the 2-stage torque converter transmission and all-wheel drive, the loader is easy to operate even in difficult ground conditions. The standard wide tires make it particularly stable and ensure high traction. The hydraulic quick coupler allows for rapid changing of the included attachments (standard bucket and pallet fork included as standard). An additional 3rd and 4th hydraulic circuit with floating position is available. H&R loaders are technically and visually optimized and thoroughly tested in our facility. In addition, each machine receives extensive rust protection. Our loaders comply with CE standards according to the EU Machinery Directive. For our machine, there is a TÜV Süd report for obtaining individual operating approval according to §21 StVZO (road approval / operating license as a self-propelled working machine). Key features of the H&R 2512 compact loader: • Full equipment • Extensively optimized in Germany • Incl. pallet fork • Incl. standard bucket 160cm wide • Hydraulic quick coupler • Additional hydraulics for front attachments 3+4 hydraulic circuit • Additional cooler for hydraulic oil • Joystick with electronic gear shifting and floating position • Large cab with good all-round visibility • Heating + ventilation • 220 Volt electric heater for preheating the engine • Rotating beacon • LED additional lighting • Radio with MP3 and USB • Adjustable comfort seat with armrest • Adjustable steering column • Hour meter and fuel gauge • Trailer hitch for additional use of trailers • Rear view camera with display • Wide tires 31X15.5-15 agricultural • 1 year spare parts warranty • CE compliant according to EU Machinery Directive Nwjdpfx Aergn U Eebuen Price Net: €18,975.00 VAT: €3,605.25 Gross: €22,580.25 Financing possible. Optional Full warranty up to 48 months possible Road approval/operating license €595 Transport DE/AT possible for an extra charge. -> If required, please provide your postcode for a non-binding, individual transport cost offer. Technical data Lifting capacity: 1200 kg Lifting height: 2489 mm (bottom edge of standard pallet fork) Discharge height: 2023 mm (standard bucket tilted) Engine: Yunnei 4 cylinder Engine power: 18.8 kW / 25 hp Emission class: Euro 5 Drive: Torque converter Speed approx. 20 km/h Dimensions (L x W x H): 3740 x 1600 x 2460 mm Weight: 2470 kg Tires: 31x 15.5 - 15 AS Accessories and spare parts are available from us. Please provide your telephone number with your inquiries.

Condition: new, sheet width 3050 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm down holder 16 Stück no. of strokes 10 - 19 Hub/min cutting angle 0.5 - 2.0 ° throat 150 mm table height 830 mm oil volume 140 ltr. weight of the machine ca. 7.800 kg range L-W-H 4150 x 2100 x 1900 mm ----- Robust electro-hydraulic CNC guillotine shear with "swing-beam" * Includes CYBELEC CNC touch-screen control system * Includes CNC electro-hydraulic blade-gap adjustment * Includes CNC electro-hydraulic cutting-angle adjustment ----- Equipment: - CNC electro-hydraulic guillotine shear with "swing-beam" - Includes CYBELEC CNC touch-screen controller, model "CybTouch 8" - Selected CNC control functions: * Backgauge positioning (X-axis) * Blade-gap adjustment * Piece counting * Cutting-length limitation * Material selection (including sheet thickness) * Cutting-line illumination (for cutting to a scribed line) ... and many more - Motorized backgauge, travel range = 5.0 – 1,000 mm (X-axis) * Mounted on recirculating ball screws * Automatically retracts/swings up at maximum travel Nedpfe Afzuzox Abujwn . to accommodate longer workpieces * Includes selectable "swing-away" (retraction) function * Positioning accuracy: 0.1 mm * Travel speed: approx. 80 mm/sec. - 1x side gauge, with T-slot and mm scale - 2x front support arms, with T-slot and mm scale - Ball transfers in the front support table - Hinged finger guard with safety switch * Finger guard with viewing windows for cutting to a scribed line - Cutting line illumination (shadow line) - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain behind the machine (safety device) - Movable foot switch - CE mark / Declaration of Conformity - Operating manual + circuit diagram + hydraulic schematic * Image shows an identical machine model

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 2,140 kg, lifting height: 2,530 mm, tire size: 31 x 15,5 -15, tire condition: 100 %, drive condition: 100 %, axle configuration: 2 axles, number of seats: 1, emission class: euro5, digging bucket width: 1,500 mm, Year of construction: 2025, Equipment: additional headlights, all wheel drive, hydraulics, standard shovel, trailer coupling, Current model designation: H&R 2210. Previous model designation: H&R 2010-B35. The H&R 2210 wheel loader (wide-track) – a compact loader with a wider track for greater stability. The new 3-cylinder Perkins Turbo engine, 18.5 kW (Mannheim, Germany), meets the Euro 5 standard, even without a particulate filter, and is particularly efficient. With the 2-stage hydrostatic drive, the compact loader 2210 reaches a speed of approximately 16 km/h and offers good handling. Thanks to the large steering angle of 42° and the small turning radius, it is easy to use in small areas. The farm loader comes standard with a pallet fork and a standard bucket, so you can start working right away. The 3rd and 4th hydraulic control circuits allow the use of various attachments. The hydraulic quick-change system allows for quick and convenient changing of front-mounted implements. With a high lifting capacity of 950 kg, the H&R 2210 loader can lift heavy loads to a height of 2.53 m. Due to the standard wide tires 31X15.5-15, it offers excellent stability. The E-mode on the joystick makes operating the H&R 2210 particularly comfortable. H&R loaders are technically and visually optimized and thoroughly tested in-house. In addition, each machine receives comprehensive rust protection treatment. Our loaders comply with CE standards according to the EU Machinery Directive. For our machine, there is a TÜV Süd report for obtaining individual operating approval in accordance with §21 StVZO (road approval / operating permit as a self-propelled work machine). Important features of the H&R 2210 farm loader: • Wider track for greater stability • Technically and visually optimized in-house • Includes manually adjustable pallet fork • Includes standard 150 cm bucket • Open cab with folding roof • Joystick with float position and E-mode • Auxiliary hydraulics for front-mounted implements, 3rd and 4th control circuit • Trailer hitch for use with trailers • Hydraulic oil cooler • Rotating beacon • LED work lights, front and rear Nwedpfov Dachjx Abuen • Wide tires 31 x 15.5 -15 • Adjustable steering column • Hour meter and fuel gauge • CE compliant according to EU Machinery Directive • 1 year spare parts guarantee Price Net: €21,672.00 VAT: €4,117.68 Gross: €25,789.68 Financing possible! Optional Road approval / operating permit: €595 Extended warranty (2 years): €590 Transport Germany and Austria: On request Technical data Engine: 3-cylinder Perkins Turbo (25 hp) Emission class: Euro 5 Lifting capacity: 950 kg Lifting height: 2530 mm (bottom edge of standard pallet fork) Discharge height: 1956 mm Dimensions: approx. 3380 x 1496 x 2340 mm Weight: 2140 kg Speed: approx. 16 km/h Bucket width: 150 cm Standard tires: 31 x 15.5 - 15 Accessories and spare parts are in stock. Please provide your telephone number with your inquiry!

Condition: new, functionality: fully functional, The Trimos V1 is ideal for anyone taking their first steps in the world of precision measurement technology. This compact height gauge simplifies single-axis measurements and scribing tasks in an impressively straightforward manner. For users who have previously worked with manual scribing height gauges, the V1 offers the perfect transition to a modern precision instrument—without sacrificing ease of use or robustness. Manufactured according to proven Swiss quality standards, the Trimos V1 stands for durability, reliability, and the highest level of accuracy. Its ergonomic design and intuitive operation make it immediately ready for use—ideal for workshops, inspection rooms, and training environments. Key Benefits at a Glance: - Ideal for beginners in precise height measurement - Easy handling and robust construction - Perfect alternative to the classic manual scriber - Swiss precision and durability - Immediately ready for use for reliable measurement results Model V1: V1 – 300 Measuring range (mm): 306 Accuracy (mm): 0.018 Repeatability (mm): 0.010 Resolution (mm): 0.01 Battery life (h): 2000 Max. travel speed (mm/s): 1500 Weight (kg): 7 Nwedpexu Dc Aefx Abuen

Operating hours: 12,087 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,500 kg Lifting height: 4,760 mm Free lift: available Mast type: Triple mast Fork length: 1,600 mm Hydraulically adjustable forks: available Side shifter: available Hydraulic valves: 3rd and 4th valve Number of wheels: 4 MACHINE DETAILS Manufacturer: Linde Type: E25L EVO Year of manufacture: 2018 Drive type: Electric Operating hours: 12,087 h Battery: 80 V / 575 Ah Battery year of manufacture: Battery voltage at rest: 84.3 V Self-weight: 4,800 kg Overall length: 4,100 mm Overall width: 1,150 mm Overall height: 2,176 mm Service valid until: UVV (German accident prevention regulations) valid until: EQUIPMENT Full cabin Heater Windshield wiper Fork positioner Side shifter Nedoz R Dvmopfx Abujwn Tilt angle display Facelift model All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out within the specified period, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 102

Operating hours: 6,836 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,000 kg Lifting height: 4,620 mm Free lift: Full free lift Mast: Triplex mast Fork length: 1,200 mm Fuel: LPG Operating hours: 6,836 h UVV valid until: 09/2027 Next service due in: 204 operating hours MACHINE DETAILS Manufacturer: Linde Type: H20T Year of manufacture: 2016 Nwodpoz R D Aysfx Abujn Own weight: 3,290 kg Overall length: 3,400 mm Overall width: 1,150 mm Overall height: 2,200 mm EQUIPMENT Side shifter 3rd hydraulic valve 4th additional hydraulic valve, free for fork positioner Half cab Windshield wiper Non-marking white tires LED work light (front) LED work light (rear) Orange warning light Safety light (front) Safety light (rear) Comfort seat with lumbar support Seat heating LPG gas exchange bottle Previously a Linde full-service unit All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out within the specified period, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 213

Operating hours: 2,419 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,000 kg Lifting height: 125 mm Fork length: 1,150 mm Operating hours: 2,419 h Battery voltage: 24 V Battery capacity: 500 Ah Battery type: 4 PzS Battery voltage in idle state: 25.3 V Battery year of manufacture: 2021 Next service due in: 1,000 h MACHINE DETAILS Manufacturer: Linde Type: T20AP Year of manufacture: 2021 Overall length: 2,000 mm Overall width: 750 mm Overall height: 1,200 mm Dead weight: 1,000 kg EQUIPMENT Folding platform Battery with Aqua+EUW Formerly a Linde full-service unit All dimensions are approximate values. No guarantee is given for typing or measurement errors. Collection conditions: Nwedpfx Abez R D Dksuen Side loading up to 6 tons possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. In the event of non-collection within the specified period, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 309

Condition: good (used), functionality: fully functional, Year of construction: 2015, control type: CNC control, degree of automation: automatic, laser source manufacturer: IPG, laser source model: YLS-6000, laser power: 6,000 W, laser wavelength: 1,070 nm, positioning speed: 350 m/min, Equipment: CE marking, centralized greasing system, cooling unit, emergency stop, safety light barrier, TECHNICAL DETAILS General Information Manufacturer: EAGLE Model: iNspire 1530 F6.0 Machine Type: Laser Cutting System Weight: 18,000 kg Laser Source Laser Source: IPG Fiber Laser Laser Power: 6 kW Working Area and Travel Ranges Working Area: 3,000 × 1,500 mm X-Axis: 3,060 mm Y-Axis: 1,540 mm Z-Axis: 120 mm Dynamics and Positioning Maximum Cutting Speed X/Y/Z-Axis: 150 m/min Cutting Speed with Simultaneous Axis Movement: 280 m/min Positioning Speed: 280 m/min Acceleration: 60 m/s² Acceleration: 6 g Minimum Programmable Stroke: 0.001 mm/m Repeatability: 0.03 mm/m Cutting Accuracy: 0.05 mm/m Cutting Capacities Black Steel: 25 mm Stainless Steel: 25 mm Aluminum: 20 mm Brass: 12 mm Copper: 10 mm Pallet Load Maximum Sheet Metal Weight: 1,000 kg Gas Supply Air Pressure: 6 bar Nitrogen Pressure N₂: 25 bar Oxygen Pressure O₂: 10 bar Operating Times Beam Emission Time: approx. 4,400 h Laser Activation Time: 19,855 h Electrical Data Main Power Supply: 400 V / 50 Hz Power Consumption: 54 kVA Control Voltage: 24 V Machine Dimensions Length: 1,000 mm Width: 3,080 mm Height: 3,060 mm Cutting Head Overhaul: 9 months ago at the manufacturer EQUIPMENT IPG Fiber Laser Source Linear Motors in All Axes Carbon Crossbeam Composite Body Pallet Changer Various Nozzles Protective Lenses Additional Accessories Njdpfx Aez R D Dqsbuewn

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS DRIVE Drive type: Electric Battery voltage: 48 V Battery capacity: 375 Ah Battery voltage at rest: 50.5 V OPERATING DATA Operating hours according to display: 16,042 h Year of manufacture: 2018 MACHINE DETAILS DIMENSIONS AND WEIGHT Nedpfsz R D Eusx Abuswn Overall length: 1,850 mm Overall width: 1,000 mm Overall height: 1,400 mm Unladen weight: 1,500 kg EQUIPMENT White, non-marking tires Road approval lighting with turn signals, compliant with StVZO (German Road Traffic Licensing Regulations) Service valid until: UVV (Occupational Safety and Health) valid until: Formerly a Jungheinrich full-service unit All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 tons with a large forklift truck available on site is possible. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not made on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 329