Used Level Gauge for sale (7,535)

Condition: good (used), functionality: fully functional, Offered is a hygiene sluice/disinfection sluice by Blue Level DLSO 2000. 400V, 16A. Complete V2A stainless steel construction. New brush rollers. Dimensions (L x W x H): 273x95x177 cm. Immediately ready for use, fully operational. Further information upon request. Payment in cash or advance payment. Sale only to commercial customers. No warranty or guarantee. Knodpfeynkh Tjx Ab Nsc

Condition: good (used), Year of construction: 1969, max. sheet width: 2500 mm Convexity length of rollers: 2700 mm max. sheet thickness (St 50): 32 mm max. sheet thickness (St 34): 39 mm min. sheet thickness (St 50): 8 mm number of straightening rollers: 7 rollers number of driven straightening rollers: 5 rollers diameter of straightening rollers: 290 mm diameter of input/output straightening rollers: 345 mm number of support rollers: 13 Knsdpfxj Aax Nxe Ab Njc diameter of support rollers: 288 mm stroke of upper beam: 120 mm Straightening speed: 16 m / min Rated power of main drive: 90 kW Total load: 138 kW

Condition: good (used), Year of construction / YOM: 1982/2024 Sheet width: 2000 mm Sheet thickness - max.: 10 mm Sheet thickness - min.: 3 mm Number of straightening rollers: 13 rollers Straightening roller diameter: 145 mm Straightening speed: 16 m/min Knedpfxs Aax Uno Ab Noc Bundle length: 2330 mm Center distance between straightening rollers: 150 mm Support roller diameter: 290 mm Main drive motor: 30 kW Weight: 32 t Additional information: - Number of support rollers: 21/24 - Number of supports (top/bottom): 3 /3 - Traverse lift speed: 0.71 mm/sec - Traverse lift stroke: -18 mm to +42 mm - Max. tilting of lower traverse: 8 mm

Condition: used, Year of construction: 1995, functionality: fully functional, Hämmerle / HRC Dividing Straightening Machine 80.1250 | 1,250 mm | 19 Rolls | ARKU Overhaul 2020 Ksdpfez Eabyox Ab Nonc For sale is our Hämmerle / HRC dividing straightening machine 80.1250, manufactured in 1995. According to the available documentation, the machine was overhauled by ARKU in 2020 and is suitable for straightening laser-cut, flame-cut, and stamped parts. Technical data according to machine documentation: Maximum material width: 1,250 mm Specified material thickness range: 0.8–20 mm 19 straightening rolls with 80 mm diameter Straightening speed: 2–20 m/min Infeed table with recessed ball rollers Driven discharge roller conveyor, approx. 2 m Year of manufacture: 1995 The actual material cross-section that can be straightened depends, among other things, on the material, material width, and part geometry. We would be happy to discuss your specific application using concrete parts as examples. Price: €140,000 net, negotiable, ex works Leopoldshöhe. The machine is available for immediate delivery. Inspection by appointment; dismantling, loading, and transport are not included in the price. We will provide documentation on the overhaul to interested parties, if available. Please include information on the material, sheet thickness, and part size with your inquiry.

Year of construction: 2024, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 1287, Two-head profiling machine, Cheyenne SP2 600, manufactured in 2024. Connection: 3 x 400 V, CE version. Dimensions: approximately 1300 x 1300 x 1600 mm (H), weight: approximately 580 kg. Maximum workpiece width: 600 mm, maximum thickness: 300 mm, minimum length: 300 mm. 2 brushes (maximum diameter 200 mm), 2 pressure rollers per unit, 2 extraction hoods with a diameter of 150 mm per brush. Adjustable feed rate: 3 - 12 m/min, fixed brush speed: 915 rpm, manual brush adjustment with handwheel and mechanical measuring rod. Motor power: 4 kW. Ksdpez Ngkkofx Ab Nonc

Condition: excellent (used), functionality: fully functional, Type Z smoking cart (5-level) Kjdpfj Aarn Ujx Ab Njnc Type: Type "Z" smoking cart 5 levels/shelves Rod length: 1000 mm 200 units available The professional, 5-level Type "Z" smoking cart is essential equipment for any meat processing plant, butcher shop, smokehouse, delicatessen, or fish processing plant. The "Z" design allows for modular nesting of empty carts, one inside the other (so-called stacking/nesting), which can save up to 70% of storage space in the facility during downtime or cleaning. The cart has 5 levels equipped with profiled recesses (teeth) that secure the smoking rods, preventing them from shifting during transport and ensuring uniform spacing between smoked meats, sausages, or poultry. The appropriate vertical space between the shelves guarantees free circulation of smoke, steam, and hot air inside the smoking and cooking chamber, resulting in perfectly even coloring and cooking of the products.

Condition: excellent (used), Year of construction: 2020, TESA Micro-Hite 600+M – Motorized Digital Height Gauge For sale: a professional TESA Micro-Hite 600+M digital height gauge, manufactured by the Swiss company TESA Technology, designed for precise dimensional measurements in metrology laboratories, quality control departments, and industrial plants. Kjdpfsz Si Sqjx Ab Nsnc The device is equipped with an electronic control panel with a color display, a motorized measurement system, and a precise measuring probe. Technical specifications: * Manufacturer: TESA Technology – Switzerland * Model: Micro-Hite 600+M * Catalog number: 00730080 * Serial number: 1K2320 02 * Measurement range: 600 mm * Device type: digital height gauge * Drive: motorized * Reading system: digital * Measurement units: mm / inches * Control panel: color LCD display with keyboard * Factory calibration date visible on the plate: 17.12.2020 * Calibration certificate: no. 1K 3056 007 32 * Marking: CE Functions and measurement capabilities: * Precise measurement of component heights * Measurement of hole and shaft diameters * Measurement of distances between surfaces * Determination of center points * Differential and comparative measurements * Automatic movement of the measuring head * Storage of measurement results * Support for serial measurements * Measurement in metric and imperial units Equipment visible in the photos: * TESA Micro-Hite 600+M height gauge * Electronic control panel * Measuring probe * Granite measuring plate * Steel frame for the granite plate * Additional accessories and fixing elements visible in the photos

Condition: used, Zwick Type: BT1-FR050TH.A1K 50 kN Material testing machine Knsdpfezii Ugox Ab Nsc Zwick/Roell BT1-FR050TH.A1K material testing machine – Precise strain gauge tests Note: No PC included!! Highlights: Testing force: 50 kN (tensile / compressive) High-precision TC-MODCSCC module for strain gauge load cells (4- & 6-conductor) Measuring range: 0.2 – 165 % nominal value, measurement value acquisition up to 500 Hz Maximum resolution: up to 297,000 points (at 50 Hz) Positioning repeatability: ±10 µm Crosshead speed: 0.0005 – 600 mm/min Robust design, compact dimensions: 1,814–2,688 mm height, 936 mm width, 722 mm depth Low noise: 59 dB(A), ambient temperature +10 to +35 °C, humidity 20–90 % Special features: Ideal for research, development, or industrial material testing Dimensions & weight: Load frame: Testing force (tensile/compressive): 50 kN Load frame height: 1,714 mm Overall height: 1,814 – 2,688 mm Load frame width: 760 mm Overall width: 936 mm Load frame depth: 477 mm Overall depth: 722 mm Weight: With electronics unit: 230 kg With typical attachments: approx. 300 kg Condition: used Scope of delivery: (See picture) ZwickRoell BT1-FR050TH.A1K testing machine Operating manual (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Used, two-story container system from the manufacturer GRAEFF. Manufacturer: GRAEFF GmbH Type: 2917.1 Design: Two-story container system Number of containers: 14 Total length: approx. 21.00 m Total width: approx. 7.50 m Floors: 2 Height of one container: 3.40 m Previous use: Chemistry and physics lessons Room layout: Classrooms, preparation rooms, technical rooms, and hallways Kedpfsz Srvkox Ab Nonc Equipment: Laboratory tables, sinks, base cabinets, media supply via ceiling-mounted systems, lighting, and electrical installations Windows: With roller shutters Access: External steel staircases with railings Plans: Floor plans and site plan available

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, machine/vehicle number: DN-ELV3200KG, Kone crane, overhead crane, bridge crane, industrial crane Hoisting mechanism with 0.3 full load hours = only 7 operating hours on the meter!!!!! Load capacity / lifting capacity 3.2t - 3,200KG Gauge 13600mm, overall dimension approx. 13800mm Year of manufacture 2000 Lifting height 6m Overall height from top of crane to hook approx. 1050mm Head beam length with buffer approx. 2450mm With floor control Crane is disassembled and immediately available Very good condition, see pictures Kjdozv Du Iepfx Ab Njnc Column-mounted swivel cranes and wall-mounted swivel cranes are also available. Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping via freight forwarder is possible, please inquire with your postal code. Collection preferred.

Condition: used, Year of construction: 2022, functionality: fully functional, tooth pitch: 100 mm, grinding wheel diameter: 125 mm, grinding wheel bore: 20 mm, We offer this used Iseli Swiss BNF 100, a fully automatic 4-axis surface grinding machine, manufactured in 2022. Manufacturer: Iseli Swiss Model: Fully automatic 4-axis controlled flank grinding machine for band saws in wet grinding version / Type BNF100 Year of manufacture: 2022 • Flank grinding machine for set, as well as stellite and carbide-tipped band saws Kedpfoz E Spcex Ab Njnc • Full enclosure with intensive water cooling • Equipped with a 4-axis CNC control system • Each movement is individually controlled via servo motors, resulting in minimal idle times • The advanced saw tooth can be finished in a clamped position • Electrically controlled, central saw blade height adjustment • Height stop for precise saw blade positioning • Use of roller linear guides for the CNC axes (stiffer machine construction and significantly increased service life) • Pneumatic saw blade clamping • Pneumatic additional clamping to stabilize thin saw teeth, resulting in increased dimensional accuracy • Operation via touch screen / color display • Data can be retrieved via the control system (standard storage space for 99,999 data sets) • Metric or Anglo-American measurement system selectable (mm or inches) + Dust extraction and auxiliary feed Technical data BNF100 Flank clearance angle: 0 - 7° Tooth pitch: 13 - 100 mm Blade width standard: 75 - 360 mm Blade width optional: 25 - 360 mm Blade length standard: from 5,300 mm Blade length optional: from 4,300 mm Grinding wheel variant 1: Ø 100 - 125 mm Grinding wheel variant 2: Ø 75 - 100 mm Grinding wheel bore: Ø 20 mm If you have any questions or need more information, please send us a message or call us.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 1,919 h, load capacity: 1,000 kg, lifting height: 1,000 mm, fuel type: electric, mast type: mono, battery capacity: 620 Ah, battery voltage: 24 V, fork length: 1,200 mm, front tire type: polyurethane tires (black), rear tire type: polyurethane tires (black), total length: 2,950 mm, total width: 800 mm, fuel: electricity, STILL EK-X 790 – High-level order picker TECHNICAL DATA Lifting capacity: 1.000 kg Lifting height: 1.000 mm Mast: Mono (1S100) Fork length: 1.200 mm Drive: Elektro 24V Knjdpfsz R Ua Dox Ab Nec Battery: 24 V 620 Ah v. 2013 Charger: Dreiphasig 24 V 100 a not tested Tyres: Polyurethan V Length: 2.950 mm Width: 800 mm Year of manufacture: 2013 Operating hours: 1.919 h Condition: working condition Internal no.: 1309088 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, Year of manufacture: 2020 Empty weight: 2.525 kg Please contact Kristoff Van Havere for more information Kjdpfxeyy Ug Es Ab Njnc - Push/pull leveler - Volvo quick coupler - Steering included - Wide 2650 mm or 3715 with opened side doors - Perfect condition

Condition: used, Vogelsang MP 825 Pallet Racking System Vogelsang pallet racking system (Type MP 825) with a total capacity of 96 pallet spaces. It offers 12 pallet spaces per bay (distributed over 4 levels with 3 Euro pallets side by side, with a bay width of 2,700 mm). The system consists of 1 base bay and 7 extension bays, resulting in a total length of approximately 22 meters. Thanks to the grid deck, the racking is extremely flexible and can be used for a variety of goods, including individual items, picking goods, or damaged pallets. For maximum safety, the system includes push-through guards and back panel grids, which are included in the scope of delivery. Perfect protection against unintentional pushing through or falling of pallets and loads. Manufacturer: Vogelsang Type: MP 825 Length: 22,000 mm Height: 6,200 mm Depth: 1,200 mm Bay width: 2,700 mm Bays: 8 Levels: 4 incl. ground level Crossbeam type: INP 100 Load per beam: 3,000 kg Load per bay: 14,000 kg Knedpfx Abszrlp So Nec Scope of delivery: 9 x Support frame 6,200 x 1,200 mm blue 48 x Pallet racking crossbeam 2,700 mm red 24 x Push-through guard 2,700 mm 32 x Back panel grid 2,700 x 1,200 mm 48 x Grid deck 1,330 x 1,200 mm Your partner for safe warehouse logistics: Assembly, disassembly & racking inspection An efficient warehouse is the backbone of your success. We ensure that your racking systems are installed professionally and meet all safety standards. As experts in warehouse technology, we offer you everything from a single source: Assembly & Disassembly Whether it is a new installation, a modification, or a warehouse relocation – we take over the professional assembly and disassembly of your systems: - Pallet racking (heavy-duty & standard) - Shelf racking for small parts and archives - Warehouse mezzanines for optimal use of space Racking inspection & inspection according to DIN EN 15635 Safety is a legal obligation. We carry out the annual expert inspection (according to DGUV Rule 108-007): - Inspection for deformations and damage. - Checking of safety pins and load signs. - Creation of a legally sound inspection report including an inspection label. "Everything from one source: We would be happy to offer you suitable bank financing for your project." More articles - new and used - can be found in our shop! International shipping costs on request!

Condition: used, 25-Meter SLP Pallet Racking System Ksdozrlxmjpfx Ab Nenc With a total length of approximately 25 meters, the 9 bays are divided into a clear bay width of 2,700 mm each. This corresponds exactly to the standard width for storing 3 Euro pallets side by side. Special rack depth: The upright depth of 1,100 mm is the standard for Euro pallets in lengthways storage. By extending the uprights to 1,700 mm and using the deep grid decking (1,700 x 890 mm), this system is perfectly equipped for special dimensions, crosswise storage, or picking operations. Capacity & Load Capacities: With 6 levels (including a floor space), the system offers space for a total of 162 pallets. The maximum bay load of 3,000 kg allows for a high product weight of up to 1,000 kg per pallet. The maximum bay load is 15,000 kg. Technical Data at a Glance: Manufacturer: SLP (Saar-Lager- und Profiltechnik) Type: SL25 Total bay length: approx. 25.15 meters (9 bays à 2,700 mm + upright width) Rack height: 7,150 mm Total rack depth: 1,700 mm (upright depth 1,100 mm + 600 mm upright extension) Clear bay width: 2,700 mm (perfect for 3 Euro pallets per level) Number of bays: 9 bays Number of storage levels: 6 levels (5 beam levels + floor space) Total pallet spaces: 162 spaces Max. bay load (per level): 3,000 kg (with evenly distributed load) Max. bay load: 15,000 kg Scope of delivery: 10 x SLP pallet rack upright frame blue 7150 x 1100 mm 10 x SLP pallet rack upright frame blue 7150 x 600 mm 135 x Grid decking 1700 x 890 mm 42 x SLP pallet rack beam orange 2700 mm Your partner for safe storage logistics: Assembly, disassembly & rack inspection An efficient warehouse is the backbone of your success. We ensure that your racking systems are installed correctly and meet all safety standards. As experts in storage technology, we offer you everything from a single source: Assembly & Disassembly Whether it's a new installation, a modification, or a warehouse decommissioning – we take over the professional assembly and disassembly of your systems: - Pallet racking (heavy-duty & standard) - Shelving for small parts and archiving - Warehouse platforms for optimal space utilization Rack inspection & inspection according to DIN EN 15635 Safety is a legal obligation. We carry out the annual expert inspection (according to DGUV rule 108-007): - Inspection for deformations and damage. - Check of safety pins and load signs. - Creation of a legally valid test report including a test sticker. "Everything from one source: We will be happy to offer you a suitable bank financing for your project." You can find more articles - new and used - in our shop! International shipping costs on request!

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 11/2010, total length: 12,240 mm, total width: 2,550 mm, wheelbase: 8,360 mm, color: other, Bremat S320 for self-leveling anhydrite 2010 10866 hrs, with starting pump. In perfect condition!! = More information = General information Year of construction: 2010 Operating hours: 10.866 Registration number: OL-68-FN Axle configuration Rear axle 1: Lift axle; Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 5.325 kg Carrying capacity: 39.675 kg GVW: 45.000 kg Condition Technical condition: very good Visual appearance: very good = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Kjdpfozucvbjx Ab Nonc Email:

Condition: used, Year of construction: 2004, operating hours: 5,945 h, Komatsu D65PX-15 crawler tractor, Year of manufacture: 2004, Operating hours: 5,945h, Undercarriage: 30%, Engine: Komatsu [155 kW/207 hp], ripper valve, immediately ready for operation! Knedpfx Abey Ivrxe Njc On request, we can provide you with a leasing or financing offer. Mr. Mihm (Tel.) will gladly assist you. Further information is available on our website. Errors and prior sale excepted! = More information = Drive: Crawler Please contact Tobias Ebert for further details.

Condition: excellent (used), functionality: fully functional, Year of construction: 2001, machine/vehicle number: EM196 - IS4095, Steel crane, overhead crane, gantry crane, indoor crane Load capacity / lifting capacity: 5t - 5000KG Track gauge: 11,390mm, overall dimensions approx. 11,550mm TYPE EL-C 50 11,390 E Year of manufacture: 2001 Lifting height: 6m Overall height from top of crane to hook: approx. 900mm Head beam length with buffer: approx. 2290mm With floor-mounted control Knodpfx Abozv H Ane Njc Crane is dismantled and immediately available Very good condition, see pictures Column-mounted slewing cranes and wall-mounted slewing cranes are also available. Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping via freight forwarder is possible, please inquire with your postal code. Collection preferred.

Condition: excellent (used), functionality: fully functional, Year of construction: 1996, machine/vehicle number: EM263 - IS4091, Steel crane, overhead crane, bridge crane, workshop crane Knodpfxszv H Ecs Ab Nsc Payload / lifting capacity 6.3 t - 6300 kg Gauge 11,390 mm, overall dimension approx. 11,550 mm TYPE EL-C 63 - 11.205 E Year of manufacture 1996 Lifting height 6 m Overall height from top of crane to hook approx. 950 mm Head girder length with buffer approx. 2180 mm With floor-mounted control Crane is disassembled and immediately available Very good condition, see pictures Column-mounted swivel cranes and wall-mounted swivel cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping via freight forwarder is possible, please inquire with your postal code Collection preferred

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 75080154.1/TKT 2, type of input current: three-phase, input voltage: 400 V, input current: 40 A, 30 C – FINN-CONVEY V307 Conveyor 3-Level Table System – Modular Cutting Room Conveyor Description For sale is a FINN-CONVEY V307 conveyor 3-level table system designed for textile cutting room operations. This system functions as a modular conveyor-based table solution for material handling and fabric movement within production. It enables efficient workflow between spreading, buffering, inspection, and cutting stages. The system has been operated as part of a fully integrated cutting line together with a Lectra Vectorfashion VT-FA-Q2-72 (unit 35 C). This integration significantly reduces manual handling and downtime, especially during fabric roll changes and feeding operations. The video material also shows a GERBER XLS-125-180-L Spreader (unit 32 C), which was used in the same production line. The equipment has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Includes • FINN-CONVEY V307 conveyor table system • Multi-level conveyor structure (3 levels) • Integrated belt transport system • Drive motors and transmission units • Sensor components for positioning and control • Electrical control cabinet Technical Details • Manufacturer: Finn-Convey • Model: V307 • Type: Conveyor table system • Application: Fabric handling and transport in cutting rooms • Configuration: Multi-level modular system • Levels: 3-level buffer structure • Power: Industrial 3-phase system Key Advantages • Full integration with automated cutting systems (Lectra line ready) • Reduced manual labor in fabric feeding and handling • Continuous material flow for optimized cutting efficiency • Modular system adaptable to different production layouts • Industrial-grade mechanical construction for long service life Production Efficiency The 3-level buffer structure allows continuous operation of the cutting machine by maintaining a constant material supply. This reduces idle time and enables • Higher throughput in cutting operations • Efficient batch handling • Improved workflow synchronization across production stages Build Quality Finn-Convey systems are known for their robust mechanical construction, designed for long-term industrial use. With proper maintenance, these systems are built to operate reliably for decades. Condition Kjdpfjy Akpzsx Ab Nonc Used industrial condition Fully functional prior to shutdown Typical signs of use from production environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Typical Applications • Cutting room conveyor systems • Fabric transport and handling • Workflow optimization in garment production • Textile production lines Location: Valga, Estonia Removal & transport: Buyer responsible for dismantling and transport Professional dismantling recommended due to system size

Condition: good (used), Year of construction: 2012, total height: 135 mm, total width: 230 mm, total length: 345 mm, overall weight: 30 kg, Machine levelling feet 70ton(7units) MACH-ID 9762 Make: BWF Knjdpfozqm Ndsx Ab Njc Type: RK5 Year: 2012 Length:345mm Width:230mm Height:135mm Weight:30kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2012, total height: 115 mm, total width: 180 mm, total length: 275 mm, Machine levelling feet BWF RK4 36 tonn (12 units) Ksdpfx Ajzqn Stjb Njnc Length:275mm Width:180mm Height:115mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1981, functionality: fully functional, total length: 1,000 mm, total height: 1,500 mm, total width: 600 mm, overall weight: 550 kg, Used precision strip straightening machines Kohler 10120 B / Year of manufacture 1981/89 Kohler 10120 B / Year of manufacture 1984 Raster RBR 18 - 250 mm Kohler 10120 B / Year of manufacture 1981 Machine was overhauled in 1989 Technical data Strip thickness - 0.1 - 1 mm Speed 6 - 36 m/min Working direction - left to right Strip width 120 mm Roller diameter 10 mm Number of straightening rollers 19 pcs Cross-section being straightened - 100 mm2 Control - Start-Stop Roller stand adjustment - motorized Dial gauges - metric Drive 0.55 / 0.75 kW Original documentation More information upon request. Kjdpfx Abez Rli Us Nsnc

Condition: good (used), sheet thickness steel (max.): 3 mm, product width (max.): 200 mm, - Capacity: 200 × 3 mm Knsdpfezb Afksx Ab Nec - Manual operation - Automatic operation - Clockwise and counterclockwise rotation - Infinitely adjustable speed - Emergency stop - 380V

Condition: used, WEBSTER & BENNETT DH 48” VERTICAL BORER MAKE WEBSTER & BENNETT, MADE IN ENGLAND MODEL DH 48” TABLE DIA 1219.0 mm SWING 1524 mm HEIGHT UNDER RAIL 650.0 mm SPEED 4.5 – 100 RPM FEED RATE 0.0050” – 0.250” / 0.127 – 6.035 mm/min PLUS Knedpexcn Hujfx Ab Nec 2 AXIS MITUTOYO DIGITAL READOUT 4 JAW CHUCK 4 CHUCK JAWS SAFETY GUARDING COUNTERWEIGHT CLEAN CONDITION