Used Heller Baz for sale (65)

Condition: used, Year of construction: 2006, operating hours: 48,659 h, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Siemens, Control unit: Siemens 840D PL Spindle: 7.000 rpm (43 kW/ 822 Nm) Tool clamping system: HSK 100 Tool magazine & places: Rack 234 / Chain 50 Rotary table: 360.000° X 0,001° Coolant unit: KNOLL, VRF 250, IKZ 50 bar, (work area flushing) Positioning range XYZ (mm): 1250 / 1000 / 1000 Pallet size (mm): 800 X 800 Isdpfx Aeug T E Asg Njbc Workpiece clamping: mechanical Additonal options: Infrared receiver for measuring probe (BLUM); Interface for attachment heads; fast drill fracture sensing (SBBK); codechip tool; Runtime and quantity recording; intergrated prozess monitoring IPM; Screen blow-off device for operator door; alternative strategy; toolplaning with MCIS TDI;

Condition: good (used), BJ. 1999+2001 Combined Crankshaft Machining Combination of centric turning and eccentric milling operations on two machines connected via a shared chip conveyor with a single chip discharge. Siemens 840D control system Tool holder - Heller Nominal tool diameter Ø700 - tools are not included but can be purchased or newly acquired for an additional charge. NC-controlled steady rest for milling operations 3-jaw chucks on both sides from Blessing with integrated alignment arms Both machines with automatic loading hatch from above with a loading interface or for manual loading. The machines are currently still in series production and can be inspected under power. Installation of components is possible upon request for an additional charge, with documentation of the interchangeable parts and tools. Ibjdpov I Ab Uefx Ag Noc Safety lock for the control system and drives included - free location. Availability upon request, warranty excluded. Year of Production: 1999+2001 Combination of concentric turning. and eccentric Milling Operations in 2 separate machines, which are linked through a common chip conveyor with high drop-off Machine control: Siemens 840D Tool Adapter - Brighter Tooling diameter Ø700 nominal - Tooling is not subject might be subject for separate purchase or new from supplier NC controlled support with pads both sides 3-jaw-chucks from Company Blessing with integrated equalizing device automatic Gantry door for overhead loading and corresponding interface or manual loading also possible Machines are actually in serial production and can be inspected upon request set-up of individual parts possible for separate oncost including documentation of change-over parts and tooling safeguarding of control and drives included - free location availability on agreement, no warranty possible

Year of construction: 1997, condition: good (used), Control uni-Pro CNC 90 Travel X/Y/Z 800/800/710 mm Spindle speed 4500 rpm Iedpfolkgfasx Ag Nebc Tool magazine for 52+120 tools SK 50 Indexing table 1° 4-fold pallet changer 500x630 mm chip conveyor

Condition: good (used), Year of construction: 2004, Technical details shown in pdf document. Ibedporuq N Isfx Ag Nec

Condition: good (used), Year of construction: 2005, Control: CNC control SIEMENS 840 D WORK AREA- Travel distance X-axis 650 mm Travel distance Y-axis 650 mm Travel Z axis 650 mm Number of NC axes 5 TABLE Rotability 360 ° - Positionability 0.001 ° - Rotation speed 30 / min Swivelability 210 ° - Positionability 0.001 ° - Rotation speed 10 / min WORKPIECE / HEAD spindle type Speed range of 45 / min Speed range up to 10000 / min Spindle diameter 80 mm tool holder Drive power (max.) 38 kW Spindal power (continuous) 25 kW Torque (max.) 132 Nm The following restrictions apply: Maximum permissible weight of the moment captured on the gripper tool. 1 000 Ncm Maximum allowable tool weight 12 daN quick tool change up to the tool weight of 3 daN axis drives Feed of 1 mm / min Feed rate up to 60000 mm / min Rapid speed 60000 mm / min TOOL MAGAZINE Number of tool positions 40 Tool diameter max. 70 mm - with free neighbor position 163 mm Tool length max. 300 mm Tool change time 3.2 s Iodpfx Ajmt Erweg Nsbc DIMENSIONS / WEIGHTS Total weight approx. 16000 kg HELLER double-spindle horizontal-BAZ with A axis and 2 x B axis Machine is equipped with minimum quantity lubrication. Machine is disassembled and stored.

Condition: used, Technical characteristics: HORIZONTAL MACHINING CENTER AUTOFEED 8 PALLETS Iodpfj Dvlxjx Ag Nebc 140 TOOL ISO50

Condition: good (used), Year of construction: 2019, operating hours: 1,994 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Fanuc, controller model: Fanuc 31i-B, spindle speed (max.): 10,000 rpm, number of spindles: 1, mount diameter: 100 mm, Operating hours: 7194 / usage time: 1994 Year of construction: 2019 Control unit: Fanuc 31i-B Spindle: PC100i (10.000 1/min) Tool clamping system: HSK 100 Tool magazine / places (Options): Chain/50 Rotary table: 360.000° X 0,001° Coolant unit: KNOLL, KF 400, IKZ 70 bar Positioning range XYZ (mm): 1000 / 1000 / 1000 Pallet size (mm): 630 X 630 Workpiece clamping: Hydraulic 80 bar Additonal options, Specifics: HELLER facing slide unit; Receiver for measuring probe (RENISHAW); Coolant temperature control; forward looking collision avoidance; Interface for exhaust system; 3 colour status lamp; work area flush; Scraping conveyor for wet machining; Fast drill fracture sensing (SBBK); multi-spindle-head support (MSK); Thermal growth compensation; Feed force display; Automatic loading sequence; Automatic unloading sequence; increased tool weight 35kg; tool codechip; Since response emails from Maschinensucher often end up in the spam folder, we kindly ask you to regularly check this folder or contact us directly. Iodpfx Aevvmnujg Nebc

Condition: used, Year of construction: 1999, Technical details: x-travel: 1000 mm y-travel: 800 mm Iedpowdywqjfx Ag Njbc z-travel: 1100 mm weight of the machine ca.: 15,2 t Tool bore: SK50 Tool taper: HSK-A 100 turning speed range: 45-6.000 U/min size of pallet: 630x800 mm change time of pallets: 21 sec Mechanical processing of cylinder heads and cylinder crankcases Machines have been in single-shift operation since 2013 Service and maintenance intervals were adhered to *

Condition: used, Year of construction: 2005, Technical details: Ibsdpsvgmitjfx Ag Noc x-travel: 2200 mm y-travel: 2200 mm z-travel: 1400 mm spindle taper ISO: 50 spindle diameter in front bearing: 110 mm spindle turning speed range: 45 - 6000 U/min pallet table size: 1000 x 1250 mm pallet worktable capacity: 6000 kg feed range: 1 - 60000 rapid traverse: 60 m/min spindle drive motor: 27 kW dimensions of the machine ca.: 15 x 8,5 x 5,7 m total power requirement: 133 kVA weight of the machine ca.: 50 t Machine with SIEMENS 840 D control - full B-axis - palette changer for 3 palettes - tool changer for 244 tools - coolant through spindle - max. workpiece swing 2200 mm *

Condition: good (used), Year of construction: 2007, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, rapid traverse X-axis: 90 m/min, rapid traverse Y-axis: 90 m/min, rapid traverse Z-axis: 90 m/min, torque: 145 Nm, controller manufacturer: Siemens, controller model: Siemens 840D, table width: 500 mm, table length: 400 mm, spindle speed (max.): 16,000 rpm, number of slots in tool magazine: 80, Brand: Heller Type: MCi 16.1 Year of manufacture: 2007 Control: Siemens 840D Travel x-y-z: 630 mm B-Axis: 360000 x 0.001° Rapid traverse rate in X-, Y-, Z-axis: 90000 mm/min Table dimensions: 500 x 400 mm Accelaration: 12 m/s² Spindle speed: 16000 rpm Ibsdpfxjvzz Tij Ag Noc Spindle power: 38kW Torque: 145 Nm Magazin places: 80

Condition: good (used), Year of construction: 2020, operating hours: 5,800 h, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,100 mm, torque: 1,146 Nm, controller manufacturer: Siemens, controller model: 840D SL, workpiece height (max.): 1,400 mm, workpiece weight (max.): 2,000 kg, rotational speed (max.): 8,000 rpm, Machine name / type: HELLER / H 8000 Operating hours: 5800 Iodpfeu Urgbjx Ag Nsbc Year of construction: 2020 Control unit: Siemens 840D SL Spindle: EPC-Unit (8.000 1/min, 60 kW, 1146 Nm) Tool clamping system: SK 50 Tool magazine / places: Rack / 265 Rotary table: 360.000° X 0,001° Coolant unit: KNOLL, KF 600, IKZ 70 bar, (work area flushing) Positioning range XYZ (mm): 1250 / 1200 / 1100 Pallet size (mm): 800 X 800 Workpiece clamping: mechanical Additonal options / Specifics: multi-spindle-head support (MSK); receiver for measuring probe (RENISHAW); fast drill fracture sensing (SBBK); interface exhaust system; screen blow-off device for operator door; codechip; Chip conveyor function check; Integrated process monitoring (IPM) + Monitoring function to minimize machine damage in case of collision; 3 colour status lamp; increased tool weight 35kg; scraping conveyor for wet machining; Coolant temperature control; Feed force display; Tangential control;

Condition: used, Year of construction: 2002, Technical details: x-travel: 800 mm y-travel: 800 mm z-travel: 710 mm Tool bore: SK 50 turning speed range: stufenlos 45 - 12000 U/min size of pallet: 500 x 630 mm tools in tool magazin: 52 Ijdpfx Agowg H Hwe Njbc weight of the machine ca.: 15 t total power requirement: 62 kW Mechanical processing of cylinder heads and cylinder crankcases Machines have been in single-shift operation since 2013 Service and maintenance intervals were adhered to *

Condition: used, Year of construction: 2002, Technical details: x-travel: 630 mm y-travel: 630 mm z-travel: 630 mm pallet size:: 400 x 500 mm spindle taper:: HSK 63 Iodpfxjvgmiyj Ag Nebc spindle turning speed - stepless: 10 - 16000 U/min total power requirement: 55 kW weight of the machine ca.: 11 t Machine with SIEMENS 840 D control for 4 axis - digital drives - palette changer 4-fold - tool changer 160-fold - coolant device with coolant through spindle - full B-axis - chip conveyor - hydr. workpiece clamping *

Condition: used, Year of construction: 2002, Technical details: x-travel: 1000 mm y-travel: 800 mm z-travel: 1100 mm weight of the machine ca.: 20 t dimensions of the machine ca.: 6,80 x 3,0 x 3,20 m Tool bore: SK50 Tool taper: HSK-A 100 turning speed range: 45-6.000 U/min size of pallet: 630x800 mm change time of pallets: 21 sec Mechanical processing of cylinder heads and cylinder crankcases Machines have been in single-shift operation since 2013 Service and maintenance intervals were adhered to Ibedpfxjw T Tnte Ag Nec *

Condition: used, Year of construction: 2003, Technical details: x-travel: 450 mm y-travel: 450 mm z-travel: 450 mm weight of the machine ca.: 14 t size of pallet: 320 x 320 mm number of spindles: 2 Double spindle 4-axis machining center Horizontal 4 machine plates Renishaw probe Control Siemens Sinumerik 840D Working space (X / Y / Z): 450x450x450 mm Load pallet / table max .: 300 kg Acceleration: 10 m / s² Rapid traverse: 60 m / min Pallet size: 320 x 320 mm Chip-to-chip time: 2.6 s Workpiece height max .: 700 mm Tool holder: HSK 63 Tool places: 2x 60 Tool spindle: 10,000 rpm, 95 Nm Speed ??increase to 18,000 rpm Infrared receiver for probe, Make Renishaw Vaf72a0p Tool magazine with 60 places Control panel on the workstation Control panel on the tool installation site Workpiece positioning stations can be rotated manually with hydraulic workpiece clamping 60 bar Pneumatic support control on the workstation Automatic swing gate Extended coolant layer 70 bar / 1500I / VF 250 Coolant Cooler Working space flushing Emulsion mist suction Roto - Clear Automatic setup process Automatic disarming process Runtime and quantity recording Status lamp 3-color modem for remote diagnosis control cabinet lighting Iedpew Ng D Hefx Ag Njbc *