Used Hermle C 22 U for sale (160)

Condition: good (used), Year of construction: 2004, operating hours: 77,711 h, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45,000 m/min, rapid traverse Y-axis: 45,000 m/min, rapid traverse Z-axis: 45,000 m/min, controller model: Heidenhain iTNC530, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hermle C30 U Siemens 840D Machine ON: 77,711 h | Spindle ON: 16,294 h - Spindle HSK-A63, 10,000 rpm - 32 tool positions - Rotary table SRT 280 mm with integrated clamping system SK50 (can be closed off if not needed or converted for use as a zero-point clamping system) - External coolant supply - Internal coolant supply with 80 bar paper band filter - Chip flushing gun - Chip conveyor - Handheld control module - Automatic cabin door - 32 tool positions plus 87 additional positions (ZM87) - Thermal compensation - BLUM tool measurement (probe on machine column) - Renishaw measuring probe - Chip container - Status beacon The machine has been thoroughly inspected; a geometry protocol and circularity test measurements are available. The machine can be viewed and tested under power at any time. Gcodpfxjxcp R Ij Ab Uoa Very well-maintained condition.

Condition: good (used), Year of construction: 1997, x-travel 600 mm y-travel 450 mm z-travel 400 mm Gjdpfowbi A Dex Ab Ujca Control Heidenhain 430 ITNC tool taper SK 40 voltage 400 V control voltage 24 V weight of the machine ca. 6 t - Operating hours: 48,690 - Max. table load: 1,000 kg - Machine weight: 6,000 kg - Includes tool holders – SK40 - Includes all descriptions - Includes programming manual – Heidenhain - Includes 1 machine vice - Includes clamping claws

Condition: ready for operation (used), Year of construction: 1999, operating hours: 2,466 h, functionality: fully functional, machine/vehicle number: 13147, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, table width: 560 mm, table length: 1,000 mm, TECHNICAL DETAILS Travel X-axis: 800 mm Y-axis: 600 mm Z-axis: 500 mm Spindle Speed range: 20 – 12,000 rpm Tool holder: SK40 Table Dimensions: 1,000 x 560 mm Tool magazine: 30 positions MACHINE DETAILS Gedpfxow Nqh Ae Ab Uoca Weight: 7,000 kg Spindle hours: 2,466 h Machine operating hours: 34,485 h Power: 15 kW (at 40% duty cycle) Frequency: 50 Hz Operating voltage: 400 V Control voltage: 24 V Total rated current: 44 A EQUIPMENT Chip tray Heidenhain TNC430 control Heidenhain touch probe system Extraction unit Electronic handwheel

Condition: ready for operation (used), Year of construction: 2001, operating hours: 10,249 h, functionality: fully functional, machine/vehicle number: 15137, travel distance X-axis: 1,000 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 550 mm, table width: 800 mm, spindle speed (max.): 7,000 rpm, number of slots in tool magazine: 28, Well-maintained machine with a spindle from 2022 TECHNICAL DETAILS Longitudinal travel (X): 1,000 mm Transverse travel (Y, slide): 630 mm Vertical travel (Z, milling head): 550 mm Control: Heidenhain TNC 430 C-axis: Full-featured A-head: Manually swivelable to 0° and 90° Spindle Spindle speed (max.): 7,000 rpm Spindle type: Geared spindle with high torque in the lower speed range Special feature: Suitable for M30 synchronous thread cutting Spindle head swivel (manual): ±90° Milling spindle diameter in the front bearing horizontal/vertical: 80 / 55 mm Tool changer: 28-station Working area Milling spindle vertical - Distance from milling spindle to top edge of rotary table: 130 - 680 mm Milling spindle horizontal - Milling spindle to the rotary axis of the milling head, rotary table: 140 - 690 mm Milling spindle vertical/horizontal - Distance from the milling spindle axis to the rotary axis of the milling head: 120/110 mm NC rotary table 4th axis: Ø 800 mm Condition & Maintenance Spindle: renewed 2022 Maintenance: carried out regularly Geometry: laser measured 2022 Tool changer: lifting unit recently replaced Maintenance reports: available MACHINE DETAILS Control on: 35,165 h Machine on: 21,574 h Program run: 11,750 h Spindle on: 10,249 h Axes in motion: 10,285 h Gcodpowmm D Nsfx Ab Uea Weight: 6,500 kg Rated power (apparent power): 17 kVA Input current: three-phase EQUIPMENT - Documentation and manual - Chip conveyor - A-head with manual tilt function to 0° and 90° - Tool changer with new lifting unit - Spindle with high performance in the lower speed range, suitable for M30 synchronous threads - Maintenance and geometry reports available

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 12263, travel distance X-axis: 875 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 7,000 rpm, quill stroke: 75 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X / Y / Z: 875 / 500 / 500 mm Quill stroke: 75 mm Table NC table: 500 mm C-axis: 360° B-axis: ±30° Rotational speed: 11 rpm Resolution: 0.001° Component accuracy: ±15'' Table load capacity: 300 kg Drive Drive power (100% / 40% duty cycle): 7.5 / 11 kW Torque (100% / 40% duty cycle): 266 / 390 Nm Speed range: 20 – 7,000 rpm Vertical milling head Quill stroke (vertical and transverse): 75 mm Swivel range: 0 – 90° Feed drives Feed forces X, Y and Z: 8,000 N Rapid traverse: 15 m/min Feed screw diameter and pitch: 32 / 10 mm Measuring system Direct path measuring system, resolution: 0.0001 mm Position tolerance Tp in X-Y-Z axes according to VDI/DGQ 3441: 0.010 mm Tool system Spindle taper: SK 40 (similar to DIN 2079, for tool holders according to DIN 69871 A) Number of tool stations: 16 Tool diameter: 80 mm Tool diameter with free adjacent stations: 100 mm Tool length: 250 mm Tool weight: 6 kg MACHINE DETAILS Gcodsw Rc Abepfx Ab Uja Control unit: Heidenhain TNC 410 Electrical data Operating voltage: 400 V / 50 Hz Total connected load: 14 kVA Dimensions & Weight Dimensions (L x W x H): 3.0 x 2.3 x 2.2 m Weight: 4,800 kg

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 550 mm, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 85, 5-Axis CNC Vertical Machining Centre with 6-station Pallet Pool Hermle C42U New in 2013/2014 Heidenhain iTNC 530 CNC control IHS Pallet system for 6 pallets (6 x workpiece fixtures) Pallet size 400 x 400 mm 2-Axis NC Rotary Tilting Table Gcsdpfx Aoxg Nfgsb Uja Rotating axis C-Axis 360° - 0.001° Tilting axis A-Axis +/- 130° - 0.001° Working travels: X 800 mm Y 800 mm Z 550 mm 85 station ATC Spindle speeds to 18000 rpm New spindle replacement in 2019 and max. 300 hours run after replacement FULLY CHECKED by a Hermle service engineer in 06.2024 (test report available) Machine in EXCELLENT condition. Video live call possible NOTE: The machine is fitted with an automation system to change pallets of 400 mm. These pallets are not included. The previous owner used a “cone fixture” system, fitting their parts with the cone fixtures for automatic loading and unloading. The “cone fixtures” are included.

Year of construction: 1997, condition: ready for operation (used), X-travel: 630mm, y-travel: 500mm, z-travel: 500mm, table diameter: 900x528mm, NC rotary table diameter: 500mm, connected load: 14kVA, length: 3600mm, width: 3900mm, height: 2100mm, weight: 6t, with documentation. Godpfjlc N Stsx Ab Uoca

Condition: ready for operation (used), Year of construction: 2000, operating hours: 14,430 h, functionality: fully functional, machine/vehicle number: 13479, travel distance X-axis: 875 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 300 kg, rotary table diameter: 500 mm, spindle speed (max.): 7,000 rpm, Machine can be shipped free of charge for €1,850 net! TECHNICAL DETAILS Control: Heidenhain TNC 410 Travel X / Y / Z: 875 / 500 / 500 mm Quill stroke: 75 mm Table NC rotary table: 500 mm C-axis: 360° B-axis: ± 30° Speed: 11 rpm Resolution: 0.001° Part accuracy: ±15'' Table load: 300 kg Drive Drive power (100% / 40% duty cycle): 7.5 / 11 kW Torque (100% / 40% duty cycle): 266 / 390 Nm Speed: 20 - 7,000 rpm Vertical milling head Quill stroke (vertical and transverse): 75 mm Gcedjvn Si Ijpfx Ab Usa Swivel range: 0 - 90° Feed drives Feed forces X, Y and Z: 8,000 N Rapid traverse: 15 m/min Diameter and pitch of the feed spindles: 32 / 10 mm Measuring system Direct position measuring system, resolution: 0.0001 mm Position tolerance Tp in X-Y-Z axis according to VDI/DGQ 3441: 0.010 mm Tool system Spindle cone: SK 40 (similar to DIN 2079, for tool holders according to DIN 69871 A) Number of tool positions: 16 pieces Tool diameter: 80 mm Tool diameter with free adjacent positions: 100 mm Tool length: 250 mm Tool weight: 6 kg MACHINE DETAILS Operating voltage: 400 V / 50 Hz Total power: 14 kVA Weight: 4,800 kg Dimensions: 3.0 x 2.3 x 2.2 m Control switch-on time: 50,052 h Program run: 15,142 h Spindle switch-on time: 14,430 h Coolant system Tank capacity: 120 l Flow rate at a flow pressure of 3 bar: 24 l/min

Condition: excellent (used), Year of construction: 2017, operating hours: 16,193 h, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, rotational speed (max.): 15,000 rpm, number of slots in tool magazine: 38, swivel angle A-axis (min.): -139 °, swivel angle A-axis (max.): 91 °, swivel angle C-axis (max.): 360 °, A similar machine was recently successfully auctioned! Bidding obliges the buyer to pick it up on time by March 31, 2025! TECHNICAL DETAILS X-axis travel: 850 mm Y-axis travel: 700 mm Z-axis travel: 500 mm Control type: Heidenhain TNC 640 Rapid traverse linear X-Y-Z: 35 - 35 - 35 m/min Linear acceleration X-Y-Z: 6 m/s² Linear feed force X-Y-Z: 7,000 N Max. jaw width: 625 mm Workpiece dimensions Max. diameter: Ø 650 mm Max. height: 500 mm Interference circle (A-axis) in 0° position: Ø 885 mm Spindle data Speed: 15,000 rpm Power/torque: 20% duty cycle, 20 kW / 173 Nm Tool holder: SK 40 Tool interface Type: SK 40 Magazine positions: 38 pieces Chip-to-chip time: approx. 6 s Tool length: max. 300 mm Tool diameter with adjacent position occupied: Ø 80 mm Tool diameter without adjacent position occupied: Ø 125 mm Tool weight: max. 8 kg Magazine load: max. 152 kg Swivel rotary table Gcsdpfx Ajv Hmdqeb Usa Clamping surface: Ø 650 x 540 mm Centering hole: Ø 32 H7 Swivel range: +91° / -139° Drive type C axis: worm Speed of swivel axis A: 25 rpm Speed of rotary axis C: 30 rpm Table load One-sided drive: 600 kg Accuracy according to ISO 230-2 Deviation (A in X-Y-Z axis): ≤ 0.006 mm Cooling system (IKZ) Standard tank capacity: 122 l Cooling lubricant tank capacity: max. 570 l at 40 bar Pressure: max. 40 bar Flow rate: 11/27 l/min Mains connection (IKZ): 400 V / 50/60 Hz Power consumption (IKZ): up to 20 kVA Filter: police filter, paper belt filter Operating pressure Hydraulic pressure: 120 bar Compressed air: 6 bar Lubrication system: minimum quantity grease lubrication MACHINE DETAILS Control switch-on time: 24,403 h Machine switch-on time: 23,349 h Program run: 16,193 h Spindle time: 13,916 h Weight: approx. 9.5 t Mains connection Voltage: 400 V / 50/60 Hz Power consumption: up to 30 kVA EQUIPMENT - BLUM measuring probe - BLUM tool laser measurement - Extendable chip drawer - Swivel rotary table - Chip flushing gun - Emulsion mist extraction - Scraper belt conveyor - Blow-off device - Blowing air through the center of the spindle - Manual cabin door - Manual cabin roof - Polycarbonate safety windows - Electrical heat compensation from Heidenhain. - Electrical manual control module from Heidenhain.

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, spindle speed (min.): 16,000 rpm, The machine is in good technical condition, featuring a Heidenhain TNC 426 control system, a magazine for 20 HSK 63 tools, including a probe + 4th axis. Gjdpoxfg Ayjfx Ab Usca

Condition: excellent (used), Year of construction: 2000, DESCRIPTION Hermle C 800 V CNC vertical machining center was built in 08.2000 in Germany. The milling center operates in three axes and the maximum X / Y / Z travels are 800, 600 and 500 mm. The machine is equipped with a Sinumerik 840D numerical control with a LAN cable to an external computer. In addition, the lathe is equipped with, among others: Chip conveyor, Hydraulic clamping, Magazine for 87 tools, Turning finder and Control cabinet air conditioning. The spindle rotates at a maximum speed of 15,000 rpm. Spindle hours approx. 4500 h. The total weight of the milling center is approx. 7 tons. Technical data of the Hermle C 800 V CNC milling center - Travel X / Y / Z axis: 800/600/500 mm - rapid traverse: 35 m/min - maximum spindle speed: 15.000 rpm oil mist extraction - spindle power: 19 kW - operating voltage: 400V; 3PH; 50Hz - control voltage: 220V AC; 24V DC - machine dimensions (L x W x H): 2,3 x 3 x 2,65 m - Total weight: 7000 kg Equipment of the Hermle C800V CNC milling center - CNC control: Sinumerik 840D - Tool magazine capacity: 87 pieces - Lamp sockets: SK40 - cooling pump through the tool: 40 bar - control cabinet air conditioner Gcjdpfjiva Dkex Ab Usa - rotating viewfinder - chip conveyor Separately additionally available with to see on the photos! tool presetter Various SK40 holders Touch probe Heidenhain TS32 Neuwetig

Condition: excellent (used), Year of construction: 2019, operating hours: 11,832 h, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, rotational speed (max.): 15,000 rpm, number of slots in tool magazine: 38, swivel angle A-axis (min.): -139 °, swivel angle A-axis (max.): 91 °, swivel angle C-axis (max.): 360 °, TECHNICAL DETAILS X-axis travel: 850 mm Y-axis travel: 700 mm Z-axis travel: 500 mm Control type: Heidenhain TNC 640 Rapid traverse linear X-Y-Z: 35 - 35 - 35 m/min Linear acceleration X-Y-Z: 6 m/s² Linear feed force X-Y-Z: 7,000 N Max. jaw width: 625 mm Workpiece dimensions Max. diameter: Ø 650 mm Max. height: 500 mm Interference circle (A-axis) in 0° position: Ø 885 mm Gcedpjvw Sdqefx Ab Uea Spindle data Speed: 15,000 rpm Power/torque: 20% duty cycle, 20 kW / 173 Nm Tool holder: SK 40 Tool interface Type: SK 40 Magazine positions: 38 pieces Chip-to-chip time: approx. 6 s Tool length: max. 300 mm Tool diameter with adjacent position occupied: Ø 80 mm Tool diameter without adjacent position occupied: Ø 125 mm Tool weight: max. 8 kg Magazine load: max. 152 kg Swivel rotary table Clamping surface: Ø 650 x 540 mm Swivel range: +91° / -139° Drive type C-axis: worm Speed of swivel axis A: 25 rpm Speed of rotary axis C: 30 rpm Table load one-sided drive: 600 kg Accuracy according to ISO 230-2 Deviation (A in X-Y-Z axis): ≤ 0.006 mm Cooling system (IKZ) Standard tank capacity: 122 l Coolant tank capacity: max. 570 l at 40 bar Pressure: max. 40 bar Flow rate: 11/27 l/min Mains connection (IKZ): 400 V / 50/60 Hz Power consumption (IKZ): up to 20 kVA Filter: police filter, paper belt filter Operating pressure Hydraulic pressure: 120 bar Compressed air: 6 bar Lubrication system: minimum quantity grease lubrication MACHINE DETAILS Control switch-on time: 20,178 h Machine switch-on time: 19,094 h Spindle time: 11,832 h Weight: approx. 9.5 t Mains connection Voltage: 400 V / 50/60 Hz Power consumption: up to 30 kVA EQUIPMENT - BLUM measuring probe - BLUM tool laser measurement - Extendable chip drawer - Swivel rotary table - Chip flushing gun - Emulsion mist extraction - Scraper belt conveyor - Blow-off device - Blowing air through the center of the spindle - Manual cabin door - Manual cabin roof - Polycarbonate safety windows - Electrical heat compensation from Heidenhain. - Electrical manual control module from Heidenhain.

Condition: used, Year of construction: 2016, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 330 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: 840D, workpiece height (max.): 370 mm, table width: 320 mm, table length: 320 mm, table load: 300 kg, rotational speed (min.): 80 rpm, rotational speed (max.): 80 rpm, overall weight: 9,000 kg, spindle speed (min.): 15,000 rpm, spindle speed (max.): 15,000 rpm, spindle motor power: 31 W, spindle nose: HSK 63A, tool length: 250 mm, tool diameter: 125 mm, tool weight: 8 g, control type: CNC control, Equipment: chip conveyor, Hermle C22U 5 Axis Machining Centre Siemens 840D Control 5 Axis Simultaneous XYZ: 450 x 600 x 330mm 320mm diameter table Maximum workpiece diameter 320mm maximum workpiece height 265mm Maximum table load 300Kg A axis -/+ 135 degrees spindle speed 15,000rpm 55 station tool changer Swarf Conveyor Coolant Tool Setter Spindle Probe Gsdpoxpil Sjfx Ab Uoca

Condition: used, Year of construction: 2016, operating hours: 80,000 h, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 330 mm, spindle speed (max.): 18,000 rpm, spindle speed (min.): 20 rpm, input voltage: 400 V, controller manufacturer: Siemens 840d sl Operate, number of spindles: 1, rotary table diameter: 320 mm, spindle nose: HSK-A 63, tool diameter: 125 mm, tool length: 250 mm, tool weight: 8,000 g, operating hours of spindle: 21,000 h, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hermle C22U 5-axis machining center Siemens 840D sl Operate 55 tool stations HSK-A63 NC swiveling rotary table SRT320 mm Worm drive C-axis Single-sided drive A-axis Standard coolant system without through-spindle coolant (IKZ) Rear scraper-belt chip conveyor External air blow Air blow through spindle center Chip flushing pistol Oil mist extraction incl. post-filter Automatic cabin door Manual cabin roof Electric thermal compensation Siemens Heidenhain touch probe The machine is currently still being measured and overhauled, but can be inspected at any time. Gcsdexxg Ezopfx Ab Uea The listed machine hours are approximate and may vary slightly.

Condition: used, Year of construction: 2014, operating hours: 87,419 h, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 330 mm, spindle speed (max.): 18,000 rpm, spindle speed (min.): 20 rpm, input voltage: 400 V, controller manufacturer: Siemens 840d sl Operate, number of spindles: 1, rotary table diameter: 320 mm, spindle nose: HSK-A 63, tool diameter: 125 mm, tool length: 250 mm, tool weight: 8,000 g, operating hours of spindle: 20,657 h, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hermle C22U 5-axis machining centre Siemens 840D sl Operate 55 tool positions HSK-A63 NC tilting rotary table SRT320 mm C-axis worm gear drive Single-sided drive A-axis Standard coolant system without through-spindle coolant (IKZ) Rear-mounted scraper belt conveyor External air blast Spindle centre air blast Chip flushing gun Gcsdpfjxxg D Rjx Ab Uea Oil mist extraction incl. post filter Automatic cabin door Manual cabin roof Electric thermal compensation Siemens Heidenhain touch probe

Condition: ready for operation (used), Year of construction: 2006, Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Spindle speed range 18000 rpm Tool taper SK 40 Additional Equipment Tool Magazine: Additional magazine ZM157 Tool Breakage/Measurement: BLUM tool breakage/measurement Measuring Probe: Heidenhain Event Messenger: Available Electrical Heat Compensation: Provided External Blowing Air: Provided / Oil Mist Extraction: Provided / Chip Trolley: 450 liters Rotating Transparent Window: Available Gedpfsx D Ew Hsx Ab Ueca Additional Accessories: Manual control module, flange for extraction 1, bed flushing, sealing air for scales, machine license TCS-Soflex This 5-axis HERMLE C30U + RS Automation was manufactured in 2006, offering advanced capabilities for precision machining. Ideal for complex geometries, this vertical machining centre represents a significant asset for enhancing your production efficiency. Consider the opportunity to buy this HERMLE C30U vertical machining centre. Contact us for more information. Application Types Milling

Condition: good (used), Year of construction: 2000, Description FOR SALE 4TH Hermle C 600 U machining centre 5 AXIS YEAR 2000 CNC Control: Typically equipped with a Heidenhain TNC 430 system, which was the benchmark for 5-axis machines of its era, or sometimes the newer Heidenhain iTNC 530 system. Axis Configuration: 5 simultaneous axes (if option chosen), with integrated tilting rotary table. Machining Travels (X/Y/Z): X: 600 mm Y: 450 mm Z: 450 mm Spindle Speed: Often fitted with a 15,000 rpm or 16,000 rpm spindle for high-speed machining (HSC). Spindle Taper: SK 40 or HSK 63. Tool Capacity: 30-position automatic tool changer. Weight: Approx. 6,500 kg, testifying to its solid, stable construction. BT MACHINES PURCHASE AND SALE Gcodpfx Aex E Ryrob Uea ALL TYPES OF INDUSTRIAL EQUIPMENT ALL TYPES OF MACHINE TOOLS

Condition: excellent (used), Year of construction: 2017, operating hours: 2,132 h, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, overall weight: 10,500 kg, spindle speed (max.): 15,000 rpm, operating hours of spindle: 5 h, We offer in perfect condition Hermle C400U. X-axis travel: 850 mm Y-axis travel: 700 mm Z-axis travel: 500 mm Spindle HSK-A63 38 tools ATC Godexy Itcspfx Ab Usca Machine has Heidenhain 640 control and only 2100 running hours. Please not machine doesn't have internal coolant or chip conveyor.

Condition: good (used), Year of construction: 1996, feed length X-axis: 700 mm, feed length Y-axis: 550 mm, feed length Z-axis: 500 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 10,000 m/min, feed rate Y-axis: 10,000 m/min, feed rate Z-axis: 10,000 m/min, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, rapid traverse X-axis: 10,000 m/min, rapid traverse Y-axis: 10,000 m/min, rapid traverse Z-axis: 10,000 m/min, mount diameter: 40 mm, table length: 1,000 mm, table width: 500 mm, overall weight: 3,500 kg, X-axis / longitudinal 700 mm Y-axis / transverse 550 mm Z-axis / vertical 500 mm Table dimensions 1000 x 500 mm Spindle speed range stepless in 3 gear steps 25 - 4200 rpm Tool holder SK 40 Feed range X-Y-Z 1 - 10000 mm/min Rapid traverse X-Y-Z 10000 mm/min Weight approx. 3500 kg Control: Heidenhain TNC 407 - TNC 415 Gsdpfxoxg Rxbs Ab Uoca

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 18780, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, rotary table diameter: 800 mm, spindle speed (min.): 18,000 rpm, Technical Details: Used Universal Machining Centre HERMLE C 40U DYNAMIC Control: HEIDENHAIN iTNC 530 X-travel: 850 mm Y-travel: 700 mm Gedpfsx Ecmhsx Ab Ujca Z-travel: 500 mm NC rotary swivel table: Ø800 mm 6-way rotary feedthrough Spindle speed: 18,000 rpm Air blast through spindle center Tool holder: HSK-A 63 Tool magazine: 38 positions Internal coolant supply: 80 bar Handwheel HR-410 Total power consumption: 41 kVA Machine weight: approx. 10.5 t Equipment/Features - Paper band filter - Coolant system - Chip conveyor - Sealed air for scales - Heidenhain infrared probe - Blum A2 laser tool measurement system - 3D Quick Set - Electronic handwheel

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Universal Milling Machine Hermle UWF 900 E Gjdpfx Aox E Aftsb Uoca Manufacturer: Hermle Model: UWF 900 E Year of manufacture: 1990 Factory No.: 1893 Technical Specifications Travel paths: X-axis (longitudinal travel): 600 mm Y-axis (cross travel): 500 mm Z-axis (vertical travel): 450 mm Quill stroke: 100 mm, extendable Swivelling range of spindle head: ±90° Milling spindle front bearing diameter: Ø 55 mm Tool holder: SK40 DIN 2080 or SK40 DIN 69871 or BT40 Table size (universal clamping table): 420 x 650 mm, extendable to 935 mm NC rotary table (4th axis): Ø 380 mm, tiltable ⚙️ Equipment / Accessories: Vertical milling head with quill and fine adjustment Universal planer and angular milling head Heidenhain control Especially suitable for Single-part and small-batch production Tool and mould making Precision and complex milling operations Condition Well-maintained, fully functional tool milling machine made with precision German engineering. Immediately ready for operation – ideal for workshops, training centers, or manufacturing companies with high quality standards.

Condition: ready for operation (used), Year of construction: 1996, Control Unit Brand HEIDENHAIN Main Drive Spindle speed range 15000 Tool taper SK40 Number of axis 3 This 3-axis Hermle C800V was manufactured in 1996. It features a SK40 spindle, capable of reaching up to 15,000 RPM, and includes tool length measuring. Ideal for precise vertical machining tasks. Contact us for more information about this machine. Gedpfx Aox D Izzeb Uoca Application Types Milling

Condition: good (used), Year of construction: 2001, for sale 2nd Hermle C 600 U machining centre 5-axis Year of manufacture: 2001 CNC Control: Typically equipped with a Heidenhain TNC 430 system, which was the standard for 5-axis machines at the time, or sometimes the then-new Heidenhain iTNC 530 system. Axis Configuration: 5 simultaneous axes (if the option was chosen), with an integrated tilting rotary table. Travels (X/Y/Z): X: 600 mm Y: 450 mm Z: 450 mm Spindle Speed: Often configured with a spindle of 15,000 rpm or 16,000 rpm, enabling high-speed machining (HSC). Spindle Taper: SK 40 or HSK 63. Tool Capacity: 30-position automatic tool changer. Weight: Approximately 6,500 kg, reflecting its heavy-duty and stable construction. Gcsdpfx Asx E Rwdeb Uea BT MACHINES PURCHASE AND SALE OF ALL TYPES OF INDUSTRIAL EQUIPMENT ALL TYPES OF MACHINE TOOLS

Condition: used, Year of construction: 2000, operating hours: 13,024 h, functionality: fully functional, machine/vehicle number: 14248, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heindenhain, spindle speed (max.): 16,000 rpm, operating hours of spindle: 12,420 h, coolant supply: 40 bar, spindle nose: HSK63, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, rotational speed infinitely variable, Hermle C800V Used tool milling machine, year of manufacture 2000 HSK 63 (30 positions) Heidenhain TNC430 Gjdpfx Aox Exxisb Usca Internal cooling (rotary union needs to be replaced) The machine can be inspected under power by appointment. The machine is available for immediate delivery.

Condition: ready for operation (used), Year of construction: 2001, Table Table load 1000 kg Main Drive Number of axis 3 Spindle Speed 16000 RPM Spindle motor power 15 kW Tool taper SK 40 Movement X-Axis Movement 600 mm Gjdpfox D Iawsx Ab Ueca Z-Axis Movement 450 mm Y-Axis Movement 450 mm Tools Max weight 6 kg This 3-axis HERMLE C600V vertical machining center was manufactured in 2001. It features a Heidenhain iTNC 530 CNC path control, 7,000 spindle hours, and a modified gantry design. The machine offers a rapid traverse of 35 m/min, a spindle speed up to 16,000 rpm, and a tool magazine with 30 positions. If you are looking to get high-quality milling capabilities, consider the HERMLE C600V machine we have for sale. Contact us for more information. Application Types Milling