Used High Gloss Polishing Machine for sale (75,675)

Condition: used, Year of construction: 1995, functionality: fully functional, Drum Grinding and Polishing Unit Manufacturer: UHLIG, Type UB 22 Year: 1995 Technical Data: Make: Werner Uhlig Model: UB 22 Year of manufacture: 1995 Drive: Worm gear with motor Rotational speed: 5.6 – 54 l/min Dsdpfx Aeyw Rhmeizowd Shaft diameter: 25 mm, max. torque: 34 Nm Motor power: 0.25 kW Dimensions: approx. 1.00 x 0.90 x 1.20 m Weight: approx. kg (not specified) Equipment: - Control with frequency inverter - 2 single-chamber drums, approx. 200 mm wide, diameter 260 mm - Infinitely variable drum speed - Fresh water rubber hose - Waste water drain connection All details are subject to change without notice. A demonstration under power is possible at any time in our exhibition hall.

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 025, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: iTNC530, total height: 2,800 mm, total length: 3,000 mm, total width: 2,500 mm, table width: 600 mm, table length: 800 mm, table load: 800 kg, overall weight: 9,500 kg, spindle speed (max.): 36,000 rpm, operating hours of spindle: 9 h, spindle nose: HSK 50E, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: AC, Equipment: chip conveyor, documentation/manual, For sale is a used high-speed machining center from the manufacturer MIKRON. High-precision CNC machining center from Mikron / GF AgieCharmilles, designed for demanding HSC machining in toolmaking, graphite and electrode machining, as well as for flexible series production. Additionally equipped with APS (Advanced Process System) and ITC (Intelligent Thermal Control) for maximum process reliability and thermal stability. At “Der Spindel Doctor”, a Step-Tec spindle (a key component of the machining center) was professionally overhauled (report and invoice included) and put back into operation after balancing and inspection. The machine will be completely set up and tested according to the Mikron protocol. During the machine inspection, many wear parts were replaced: X-axis encoder and scale, pneumatic cylinders on the tool changer, tool holders, pneumatic maintenance unit, pneumatic hoses, MMS hoses, water hoses, etc. The machine is energized and can be inspected and tested. By arrangement, the machine can be put into operation at your location. Accessories: 4-position pallet changer II Table chuck Preparation for PS 32.00 measuring probe Mobile handwheel Blum laser tool measurement system Spindle cooling unit Minimum quantity lubrication - Unilub Oil mist extraction Optical operating mode indicator Air nozzle on the spindle slide Djdpfx Aez Dx Sheizowd Chip conveyor (including coolant tank) General overhaul of the spindle

Condition: used, machine/vehicle number: 1203-5, Table size: approximately 1200 x 600 mm, with a machine vise. Djdpfo Af Nktjx Aizswd

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 1,100 mm, table length: 4,500 mm, table width: 2,500 mm, spindle speed (max.): 22,000 rpm, CNC Heidenhain iTNC 640 WORKING AREA: Longitudinal X-axis travel: mm 4.000 Transversal Y-axis travel: mm 2.200 Vertical Z-axis travel: mm 1.100 Maximum speed with interpolating axes: m/min 50 WORKTABLE: Dimensions: mm 4.500 x 2.500 Height: mm 300 Load capacity: T/m² 15 T-slots for workpiece clamping mm 28 DIN 650 (H12), complete with leveling elements. T-slot direction parallel to Y-axis movement. CONTINUOUS POSITIONING UNIVERSAL HEAD WITH ELECTROSPINDLE: Automatic universal head indexed to 360,000 positions (every 0.001°). Rotation is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows 10° undercut machining. Internal cooling system for bearings and axis motors. C-axis rotation range: ± 270° A-axis rotation range: ± 185° Maximum axis rotation speed: rpm 30 Maximum torque available on A/C axes: Nm 450 Axis clamping torque: Nm 1.400 Spindle power (S1/S6): kW 22/33 Spindle torque (S1/S6): Nm 84/128 Maximum spindle speed: rpm 22.000 Constant power range: rpm 3.000 to 18.000 Constant torque range: rpm 10 to 3.000 Tool interface: HSK-A63 DIN 69893 ELECTROSPINDLE HSK-A100 WITH SEMI-AUTOMATIC CHANGE SYSTEM Spindle power (S1/S6): kW 37/43 Spindle torque (S1/S6): Nm 140/165 Dwodpfjyv In Isx Aizjd Maximum spindle speed: rpm 15.000 Constant power range: rpm 2.500 to 12.000 Constant torque range: rpm 10 to 2.500 Tool interface: HSK-A100 DIN 69893 CHAIN TOOL MAGAZINE – 55 POSITIONS, HSK-A100 / HSK-A63 Floor-mounted fixed chain magazine located at the rear of the machine, fully enclosed for operator protection, equipped with a vertical tool change arm and automatic tool pre-selection. Fixed-pocket management system. Hydraulic axis locking Total tools: No. 55 HSK-A63 tools (DIN 69893): Number of tools: No. 30 Max tool diameter: mm 90 Max tool diameter (with adjacent pockets free): mm 160 Max tool length: mm 300 Max tool weight: kg 10 HSK-A100 tools (DIN 69893): Number of tools: No. 25 Max tool diameter: mm 100 Max tool diameter (with adjacent pockets free): mm 160 Max tool length: mm 450 Max tool weight: kg 20 REQUIRED CONNECTIONS Maximum installed power: kVA 177 Maximum current required: A 235 MACHINE EQUIPPED WITH: • Heidenhain HR550 remote electronic handwheel • High-pressure water and air through the spindle • Semi-automatic electrospindle change system with HSK-A63 and HSK-A100 interfaces • Various tooling included with the machine • Renishaw probe • BLUM laser presetting system • AUTOCAL automatic head calibration system • Visormax subscription for remote monitoring • Electrical cabinet air conditioning unit • Cooling system for all axes and the electrospindle • User and maintenance manual and CE declaration of conformity

Condition: good (used), Year of construction: 2010, functionality: fully functional, Used, well-maintained V-TRADE quick-change drill press, model: ZX3840. Drilling capacity in steel: 40mm. Thread cutting up to M30. Dwsdpsz Tdkvsfx Aizod Spindle taper: MK4. Spindle speed range, steplessly adjustable via two gear stages: 50-315/315-2000 rpm. 8 automatic feeds: 0.08-0.5mm/rev. Spindle extension. Quick-change chuck: RÖHM. Machine vise. Halogen lamp. Machine feet. Technical data and dimensions: Subject to change.

Condition: used, Weipert crankshaft grinding machine Weipert Grinding bench Centering spindle: Röhm 110 H MK5 Machine length: 4300 mm Dwjdpfx Aijihfryszjd You can find other grinding machines in various sizes – new and used – in our shop! International shipping costs available upon request!

Condition: good (used), machine/vehicle number: RTT HAU T3, Used rotary table polishing machine Manufacturer: Hau Rotary table with 6 working spindles and 3 polishing stations with high-pressure nozzles, 5.5 kW motors, Dodpfx Ash Ug Uloizowd control cabinet.

Condition: ready for operation (used), High-speed radial drilling machine, MK 2 Speed infinitely adjustable Drilling head electrically adjustable Dwodpfx Aiez D D I Iezed

Condition: used, Year of construction: 1996, functionality: fully functional, working width: 300 mm, planing height: 200 mm, High-performance planing and profiling machines / Four-sided planer Manufacturer: Weinig Type: Hydromat 30 / H 30 N The machine comes from a parquet manufacturing facility. Planing width: approx. 300 mm (according to the model designation) Planing height: approx. 120 mm (estimated) Spindle arrangement: Bottom (surfacing), 22 kW Right, 7.5 kW Left, 18 kW Top, 30 kW Dwjdpfx Ajz D Exbjized Spindle diameter: 50 mm Feed rate adjustable, 12 - 120 m/min. Voltage: 380 V, 50 Hz Expected availability from January 2027!

Condition: excellent (used), Year of construction: 2023, 400mm swing, 220mm max diameter, 490mm between Centres, Siemens 828 Control, 65mm bar capacity, 12 station VDI30 turret, 17kW Spindle Motor, Spindle Speed 4000rpm, 0.001 degree C axis, +/- 35mm Y axis, Dsdpfxsz Srv Dj Aizjwd low volt light, coolant, Tool setter, Tailstock, swarf conveyor

Year of construction: 2026, operating hours: 100 h, condition: refurbished (used), functionality: fully functional, machine/vehicle number: FL80, High frequency welding machine Revised and tested 2026 Arm 80cm Single electrode 20x900mm Plexiglass hand guard protection Power 12KW Absorption 15KVA Control panel on movable external arm ITL9-1 triode tested and working Dsdpfoy Dtz Ajx Aizswd 12 months warranty

Condition: excellent (used), Year of construction: 1987, TOYOSK 0-PTMS fixed spindle pitch high speed 12-spindle tapping machine Year of manufacture: 1987 Speed ​​(3 stages): 850 / 1200 / 1700 rpm Dwodpfx Aewifd Hsizod Speed ​​change: Mechanical (stepped stages) Spindles: 12pcs For precision mechanics, small holes / threads. Application: Simultaneous preparation of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings)

Condition: good (used), Rema polishing machine, type SMG 56. Speed: 1400/1700/2000 rpm. 380 volts. 5.5 hp. Dodpozw Ncyefx Aizjwd

Condition: good (used), Year of construction: 2016, machine/vehicle number: 160409, Offer 26217 Technical specifications: - Drilling capacity in full steel ST 60: 40 mm - Thread cutting ST 60: M 30 - Drill spindle connection: MK 4 - Quill stroke: 200 mm - Drill spindle speeds, stepless: 50 - 2000 rpm - Drilling feed rates: 0.08 - 0.50 mm/rev - Height adjustment of the drill column: 380 mm - Overhang: 950 mm - Travel of the upper slide: 590 mm - Table size: 1200 x 500 mm - Drive: 400 V / 4.5 kW - Space required (approx.): W 1200 x H 2400 x D 1700 mm - Weight (approx.): 2700 kg - Includes: - Thread cutting device Dwodpfx Aoz Arnioizjd - Hydraulic column and arm clamping - Coolant system - T-slots, vertical, on the left side of the machine - Various accessories

Condition: used, EMA high-frequency welding machine with a chilled water unit EMA high-frequency welding machine MFA with Thermotec PT2000 water cooling system Welding machine range: 0 - 1000 °C MF output: 80A MF generator frequency: 10 kHz Mains connection: 380V Dwsdpfod Tv H Dsx Aized 106 A Foot pedal Water cooling, chilled water unit Thermotec PT2000 Dimensions approx. L1500 x W730 x H1900 mm Volume: 1730 liters Year of manufacture: 2004 The collection basin is not included in the scope of supply. You can find more items – new and used – in our shop! International shipping costs available upon request!

Year of construction: 2015, condition: used, End-facing slides: 7, upper chamfering slides: 3, lower chamfering slides: 3. Inspection possible by appointment. Dwedo Aalprepfx Aizod

Condition: ready for operation (used), ROTER BERG - Buffing wheel / Polishing machine Djdpfx Ajztfi Ijizjwd -Speed: 500 rpm -Wheel diameter: 200 mm -Center height: 300 mm -Motor power: 0.75 kW -Connection cable Dimensions: L x W x H: 0.6 x 0.5 x 0.4 meters / Weight: 95 kg Errors and omissions excepted.

Condition: ready for operation (used), 1 unit available We are offering a high-quality GARANT LCV 125 G chuck for professional use in CNC machining centers. This chuck impresses with its high clamping force, precision, and optimal accessibility, making it ideally suited for 5-axis machining and complex milling operations. Technical features: Manufacturer: GARANT Dwedozuz R Repfx Aized Type: LCV 125 G Jaw width: 125 mm High clamping force with a compact design Precise workpiece positioning Ideal for 5-sided and 5-axis machining Robust industrial design Advantages: High repeatability Optimal accessibility for milling tools Reduced setup times Safe and vibration-free workpiece clamping Suitable for single-part and series production Condition: Used, fully functional. Normal signs of wear from industrial use.

Condition: new, STRUERS Automatic Metallographic Grinding and Polishing Machine Automatic Grinding and Polishing System Struers Xmatic U NEW / unused With ultrasonic cleaning and accessories For sale is a new, unused Struers Xmatic U for fully automatic metallographic sample preparation. Automatic grinding, polishing, cleaning and drying of material samples for metallography and quality assurance. Technical data: Manufacturer: Struers Type: Xmatic U Article number: Type of equipment: Automatic grinding and polishing system Design: With ultrasonic cleaning Power connection: 3 × 380–480 V / 50–60 Hz Equipment and functions: Automated grinding and polishing processes Automatic sample holder handling Cleaning and drying processes Ultrasonic cleaning Programmable preparation sequences Reproducible sample preparation Dimensions and weight: Footprint according to manufacturer: approx. 2,430 × 750 mm (W × D) Total weight according to weighing: 1,300 kg Machine height: not confirmed Transport dimensions: on request Scope of delivery according to parts list and original photos: 1 × Struers Xmatic U – Art.-No. × RFID stainless steel sample holder Ø 160 mm 6 × Ø 25–40 mm – Art.-No. × special leveling unit for 160 mm holder Art.-No. DE sets of disposable tray inserts – Art.-No. 49900077 Filter bag for MD station – Art.-No. 49900085 1 × lapping diamond – Art.-No. × dressing stones – Art.-No. 40800241 1 × collection tray 2,600 × 950 × 50 mm Material thickness 3 mm – DE-730300 1 × Service kit Xmatic – Art.-No. 16892999 Additionally documented in original photos: 75-liter container – Art.-No. Notes on the scope of delivery: The circulation pump with changeover valve for the MD station (Art.-No. is not included in the documented scope of delivery. Check the scope of the cooling system and connection components before commissioning. Condition: NEW / unused Not assembled or put into operation Main unit stored in a wooden crate Accessories packed separately Assembly and commissioning are not part of this offer and must be organized by the buyer. Original purchase price (net): 148,000 € Total weight according to weighing: 1,300 kg Shipping by forwarding agent possible by arrangement. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone. Dwsdpfoz Tqt Rex Aizsd

Condition: excellent (used), Year of construction: 2011, operating hours: 5,303 h, functionality: fully functional, machine/vehicle number: 5847, travel distance X-axis: 600 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 360 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 42,000 rpm, spindle speed (min.): 5 rpm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, table width: 550 mm, table length: 450 mm, type of input current: three-phase, table load: 350 kg, overall weight: 5,500 kg, workpiece weight (max.): 350 kg, input frequency: 50 Hz, controller manufacturer: Heidenhain, controller model: TNCi530i, operating hours of spindle: 5,303 h, Equipment: documentation/manual, rotational speed infinitely variable, High-Speed Milling Machine HSC500/3 HSC500 - 3 Axis Annual maintenance Spindle operating hours HVC140: 5303h Travel range X/Y/Z: 700/590x580x360 mm Actual machining area: 580x530 mm Table area: 550x450 mm Workpiece weight: 350 kg Distance table to spindle nose: 160/520 mm Machine dimensions (W x D x H): 3200x2250x3000 mm Rapid traverse: 30 m/min Equipment: Heidenhain iTNC530i control Prepared for dust extraction Tool changer with 60 stations, HSK40 (Minimum quantity lubrication) Adjustable air nozzle Tool length measurement with Blum laser Workpiece measurement with Renishaw OMP-400 touch probe Additional lighting Electronic handwheel with enabling switch Milling spindle: Steptec HVC140-15/42 42,000 rpm, 5303 operating hours MMS Lubtools 3 kW cooling system Loading door at rear of machine Length compensation, temperature compensation for accuracy package Dedpfx Aijy R U Azjzewd Warranty: 3 months (milling spindle excluded) Transport, commissioning, training Options on request

Condition: ready for operation (used), functionality: fully functional, COLETT - Gamesa – Radial drilling machine “PORTABLE, operated by crane” -Outreach approx. 1200 mm Djdpfjzpfy Sox Aizswd -Universal swivel head -Spindle speeds 95 – 750 rpm -Automatic feed -Morse taper shank MK 4 -Outreach height-adjustable, approx. 1400 mm -Control cabinet / Retrofit Dimensions: L x W x H 2 x 1 x 2.1 meters / Weight 1600 kg Errors and omissions excepted.

Condition: refurbished (used), 1 overhauled HAU table polishing machine, model T1500 (maximum part processing length 1500 mm), with 1 PES/3 polishing station and a control cabinet. The table was disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The guide shafts were re-bearinged, and a new gearbox was installed. + 1 PES/3 polishing station, 11 kW (pneumatic lifting, 100 mm oscillation AND motorized height adjustment). Max. wheel width 400 mm, max. wheel diameter 400 mm The station was completely disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The polishing shaft was completely re-bearinged, including the liner bearings. The oscillation device was also completely re-sealed. New motor, pulleys, and drive belt were installed. Djdpsw Au A Eofx Aizewd + 1 new control cabinet for controlling the above-described system. Table speed and polishing wheel speed adjustable via frequency converter.

Condition: used, Year of construction: 1988, Dalmastroj BRB-3 Conventional quick-feed radial drilling machine Condition: Used Year of manufacture: 1988 Technical data: Drilling capacity in steel: Ø 30 mm Overhang: 430 - 1000 mm Column diameter: 200 Workpiece height: 500 mm Drill spindle taper: MK 4 Speed range: 100 to 1120 rpm (8 speeds) Dodpfxezhualj Aizjwd Head swivel: 360° Motor power: 1.4 / 1.8 kW Connection: 400 V Machine weight: approx. 2100 kg incl. accessories Equipment: - Coolant foot with pump - Thread cutting device - Drilling depth stop - Drill chuck

Condition: good (used), Year of construction: 2013, Traverses X Y Z: 1020 x 610 x 620mm, Table size 1200mm x 600mm, spindle speed 12000rpm, spindle motor power 14.7kW, Siemens 840DSL control with Shopmill, 43M/min rapids, Spindle taper BT40, 30 station ATC, through spindle coolant, swarf conveyor. Dodpfxez Eh Nle Aizowd

Condition: good (used), Year of construction: 2014, Offer 26252 Technical data: - Drilling capacity in full steel ST 60: 22 mm - Drilling capacity GG 25: 32 mm - Thread cutting ST 60: M 20 Djdpfx Aiozwftzozowd - Thread cutting GG 25: M 24 - Drill spindle mounting: MK 4 - Quill stroke: 140 mm - 18 drill spindle speeds: 60 - 3050 rpm - Drilling feed, stepless: 0.075 - 0.15 - 0.70 mm/rev - Drilling radius min / max: 420 / 1320 mm - Swivel angle: 320° - Table size: 1200 x 600 mm - Table height: 905 mm - Motorized height adjustment / stroke of the drill column: 430 mm - Hydraulic column and arm clamping - T-slots, vertical, on the left side of the machine - Coolant system - Drive: 400 V / 1.1 / 1.6 kW - Space requirement: approx. W 1300 x H 1910 / 2340 x D 2700 mm - Weight: approx. 1800 kg