Used Holke F 10 V for sale (83,776)

Condition: new, Year of construction: 2024, fuel type: diesel, power: 248 kW (337.19 HP), motor manufacturer: Cat C9.3B, General information Field of application: Construction Weights Empty weight: 4.784 kg Functional Generator capacity: 310 kVA CE mark: yes Other information Fuel consumption: 62.6 Liter / hour at 100 % Load Generator: Cat LC5114N Frequency: 50/60 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Gujdpfx Aget D Uhzj Nsh Water tank volume: 667 l Transport dimensions (LxWxH): 4,085x1,514x2,277 Production country: CN Additional information Please contact Kenny Bongers, Tijmen Pesselse or Arjen van Dijk for more information - Noise Rating: 67.2 dB at 7m and 100% Load - Stage V / StageV / Stage 5 / Stage5 / EU Stage V / EU StageV / EU V / EU Five / Stage Five / EU Stage 5 / Tier IV Final / Tier 4 Final / EU Tier IV final

Condition: ready for operation (used), Indramat MAC112C-0-KD-3-F / 130-A-0 Permanent magnet motor SN:51095 ,used, normal signs of wear, 100% functional, scope of delivery according to photos Godpfoi D Iqkex Ag Njuh

Condition: used, axle configuration: 3 axles, loading space length: 10,500 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, loading space volume: 57 m³, first registration: 12/2009, Chassis In aluminium Two fully automatic, welded I-beam longitudinal members with welded crossmembers. Chassis width 1,600 mm Axles and Suspension Disc Brake Weightmaster DC axle assemblies type DCA 3 x 9 t with DC air suspension, air bellows centrally mounted to the chassis longitudinal beam, lifting axle with starting aid and manual forced lowering, load pressure gauge, raise/lower valve, BVA brake wear indicator Gusdpfx Agjxfn Aze Njh Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 approx. 50-60% with steel rims, 11.75 x 22.5 ET 120, UNI wheel bolts Landing Gear Mechanical landing legs with two speeds, 2x 20 t support load; for air suspension we use swivelling feet Brake System To E.G. standard, two-line Wabco system, spring-loaded parking brake acting on two axles and EBS-D+ Wabco system, aluminium air reservoir system Electrical System In compliance with German Road Traffic Licensing Regulations (StVZO), with 2 five-chamber Aspöck-type taillights, 24-volt system, with 2x7 and 1x15-pin sockets, side marker lights, 1 separate halogen reversing lamp (mounted inside right body), 2 halogen work lamps mounted laterally approx. behind the landing gear (height of underrun protection) Tipping Body/Container Body fully welded inside Aluminium container, side walls 30 mm thick plank profiles (2-3 mm), 600 mm wide, welded, floor 6 mm thick high-wear resistant alloy (5383H34/HB 110), front wall 4 mm reinforced, straight version, rear wall universal door, straight version, with double-wing doors in 2/3-1/3 split; equipped with a grain chute, rubber seal for sealing the door gap, rear doors sealed on the sides and bottom, rear doors partially smooth-clad with aluminium, universal door operated automatically-pneumatically with separate lever, lockable, rear hoop made of aluminium, pivoting, two hold-downs with rubber buffers on the tipping body fixed to the frame at the front wall, Hydraulic System Hydraulic cylinder mounted on front wall with working pressure of 135 bar, make Edbro, 150 bar with fixed half 1", Accessories 6 Parlok mudguards, aluminium spare wheel holder, foldable right-hand side underrun protection, 2 Nirosta toolboxes on the left, approx. 3 m aluminium ladder, 3 mid-mounted swing hoops raised by approx. 150 mm, additional central hoop holder for positioning (centrally and in front of the rear door) for a total of 2 hoops to increase loading width, sliding tarp with a central light strip and separate reinforcements in wear areas, approx. 660 g/m² quality with sliding tarp system, circumferential elastic cord at the rear end of the tarp, secured by two tension hooks on the rear swing hoop, walkway on the frame, tarp closure on the side with tension straps, rear tarp closure with large aluminium sheet cover and sliding tarp at the rear with welded-in elastic cord for protection against water ingress, robust foldable underrun protection in aluminium with two towing eyes left and right incl. locking pins, 2 longitudinal tension straps attached inside the body, etc... Offer and pictures non-binding

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 3501100, travel distance X-axis: 550 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 460 mm, spindle speed (max.): 10,000 rpm, rapid traverse X-axis: 10 m/min, TECHNICAL DETAILS Travel Paths Guodpfx Asxb Aczjg Njh X-axis travel: 550 mm Y-axis travel: 305 mm Z-axis travel: 460 mm Main Spindle Main spindle speed range: 10 - 10,000 rpm Drive power - main spindle: 11 / 7.5 kW Max. torque: 70 / 48 Nm Tool holder: BT 40 Worktable Clamping surface: 800 x 320 mm Max. table load: 300 kg T-slots: 3x 14 x 100 mm Distance spindle / table: 100 - 600 mm Tool Changer Number of tool stations: 12 Tool holder: BT 40 Max. tool diameter: 70 mm Max. tool weight: 6.0 kg Tool-to-tool change time: 7.0 sec Feed Rates Rapid traverse (X / Y / Z): 10 m/min Feed rate: max. 10,000 mm/min Repeatability: +/- 0.008 mm Positioning accuracy: +/- 0.01 mm MACHINE DETAILS Control: Siemens Sinumerik 808D adv. Space & Weight Required space approx.: 3.5 x 2.5 x 2.4 m Machine weight approx.: 2,800 kg Total power requirement: 15 kVA EQUIPMENT Documentation Chip removal system Coolant system Tool changer RENISHAW - Primo touch probe

Condition: ready for operation (used), Year of construction: 2022, Control Unit Brand HEIDENHAIN Main Drive Godpfxoxl H Ato Ag Nouh Spindle speed range 15000 Number of axis 3 Movement X-Axis Movement 1100 mm Y-Axis Movement 560 mm Z-Axis Movement 510 mm This 3-axis DMG MORI CMX 1100 V was manufactured in 2022. It features a Heidenhain TNC 640 control, 15,000 rpm spindle, and a 30-tool ATC. The machine offers a 1400 × 560 mm table and rapid traverse of 30 m/min. If you are looking to get high-quality milling capabilities, consider the DMG MORI CMX 1100 V machine we have for sale. Contact us for more information. Application Types Milling

Condition: new, The HFS 40100 F Advance is a state-of-the-art Conventional Surface Grinder in the Grinding Machines category, offering a robust solution for precision machining. Designed with a cast-iron frame that ensures superior rigidity and torsional strength, this machine delivers exceptional machining quality. Equipped with a powerful coolant pump and an easily accessible enclosure, it guarantees a clean workspace while the preloaded precision bearings optimize grinding performance. One of its standout features is the magnetic clamping plate, which includes a built-in demagnetizing function to enhance efficiency. The advanced Siemens technology facilitates easy programming through a user-friendly touchscreen, allowing for high precision across different operations. Perfect for those who require more than conventional options but find CNC overwhelming, the HFS 40100 F Advance is ready to meet your grinding needs. Don't hesitate to request a quote for this exceptional Conventional Surface Grinder and experience the efficiency of advanced machining technology. Guodpfxou E Ivve Ag Neh

Condition: like new (used), Year of construction: 2009, load capacity: 1,100 kg, construction height: 2,900 mm, operating hours: 557 h, fuel type: electric, mast type: duplex, Manufacturer + model: LINDE V 11 / 015 Mast: 2W4800 ID: 25062.0050 Category: Used Mast: 2W Lowered height: 2900 mm Lifting height: 4800 mm Capacity: 1100 kg Platform height: 4350 mm Picking height: 5950 mm Guodpjwdl N Sofx Ag Neh Initial lift: Yes Cabin width: 1000 mm Year: 2009 Hours: 557 hours Battery capacity: 48 v / 465 ah Options: - DOUBLE steering!!!! - Adjustable forks!

Condition: ready for operation (used), Indramat MDD093B-F-020-N2L-110GA0 Permanent Magnet Motor SN:MDD093-12272, used, normal signs of use, 100% functional, scope of delivery as per photos Godpsi D Ivljfx Ag Nsuh

Condition: used, axle configuration: 3 axles, loading space length: 10,550 mm, loading space width: 2,480 mm, loading space height: 1,900 mm, loading space volume: 50 m³, first registration: 10/2014, Chassis light version In aluminum (15-6-12) Two fully-automatically welded I-section longitudinal beams with welded cross members. Chassis width approx. 1,600 mm. Axles and suspension: 430 mm disc brakes, "Off Road Version." SAF-Intradisc axle assemblies 3 x 9 t with SAF air suspension, air bellows centrally arranged along the longitudinal chassis beams, 1st axle liftable with starting aid and manual forced lowering, Smart Board info center, raising-lowering valve. Tyres and Wheels 6 wheels with 385/65 R 22.5 tyres approx. 50% tread remaining, with Alcoa aluminum rims "satin" 11.75 x 22.5 ET 120, UNI-wheel bolts for aluminum rims. Landing Legs Mechanical version with single-side operation, 2-speed with swing foot for air suspension, 2x20t (ton) static load. Brake System According to E.G. standard, dual line Wabco system, spring-loaded parking brake acting on two axles and Wabco EBS-E incl. RSS (Roll Stability System), Wabco Smart Board info center, aluminum air tank system. Electrical System In accordance with StVZO regulations with 2 five-chamber lights, type Aspöck Ecopoint 2, 24 Volt system with 2x7-pin and 1x15-pin sockets, with side marker lights, 2 separate LED reversing lights at the rear, 2 separate LED work lights on the landing legs. All air and electrical lines neatly routed in plastic tubing! Gsdpfx Agexfn Dls Njuh Tipping Body / Tipper Body, fully welded inside Aluminum tipper body, side walls 30 mm thick plank profiles (2-3 mm), 600 mm wide, fully welded; floor 8 mm thick wear-resistant alloy (5383H34/HB 110), front wall 4 mm reinforced in straight design, rear wall as double-wing door in straight design with 2 wing doors in 2/3-1/3 division with a grain chute. Rear hoop in aluminum, pivoting, two hold-down devices with rubber buffers on the tipper body fixed to the front wall frame. Hydraulic System: tipping cylinder with "cardan" mount, Hydraulic cylinder mounted on the front wall with an operating pressure of 150 bar, brand Edbro, with approx. 2.5m hydraulic hose and loose 1" connection half, tipping angle approx. 48 degrees. Accessories 6 Parlok mudguards, complete spray flaps across the full vehicle width mounted on side protection, ALU spare wheel holder, right-hand side underrun protection, foldable, large tool box type 860, approx. 3 m aluminum ladder, 3 central aluminum swing hoops raised approx. 150 mm, roll tarp with central translucent strip and separate reinforcements in wear areas in approx. 660 g/m2 quality with roll tarp system, continuous elastic rope at the rear edge of the tarp with two tension hooks to fix to the rear swing frame, catwalk on the tipper body with access on the left, tarp closure on the side with tension belts, tarp closure on the rear with welded-in elastic rope to prevent water ingress, robust foldable underrun protection in aluminum with two towing eyes on left and right incl. retaining pins, 2 "Clear-Pass" mud flaps on the mudguards according to EU standard, etc. Offer and photos subject to change.

Condition: new, bore capacity in steel (diameter) 32,0 mm throat 255 mm bore stroke 120 mm morse taper 4 MK table: 385 x 335 mm Guedpjxaaqgefx Ag Nsh turning speeds 80 - 2130 U/min total power requirement 1,1 / 2,2 kW weight 125 kg range L-W-H 460 x 900 x 1730 mm Furnishing: - Surface-machined work table - Height adjustable via rack and hand crank - Ground base plate with T-slots for clamping high workpieces - V-belt drive with balanced drive pulleys for smooth running - Adjustable drilling depth stop for precise infeed of the quill - Powerful 2-stage motor, speed range from 80 - 2130 rpm - Direction of rotation switch for clockwise and counterclockwise rotation included in the scope of delivery - Cross line laser device for comfortable work - Compact, stable cast iron construction in a modern design - Stable and polished steel column, designed for heavy use Scope of delivery: - Drill chuck arbor MK 4 / B 18 - Keyless chuck 1 - 16 mm / B 18 - Cam switch for right-left rotation - Cross line laser device - T-nuts - Height-adjustable protective cover

Condition: used, overall weight: 30,000 kg, empty load weight: 7,850 kg, maximum load weight: 22,150 kg, axle configuration: 3 axles, loading space length: 8,100 mm, first registration: 04/2021, suspension: air, tire size: 245/70R17,5 ---/140J, color: other, gearing type: other, front tire size: 245/70R17,5 ---/140J, rear tire size: 245/70R17,5 ---/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading area length approx. 8,100 mm, loading height approx. 890 mm, 18 x lashing eyes, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Gjdpfx Agoxd Ag Ee Njuh

Condition: used, Working width 410 mm Length of the planing table 1450 mm Number of knives 4 St. Motor output 4 kW Dimensions (L/W/H) 2650x850x1100 mm weight of the machine ca. 750 kg Surface planer F 410 N ----- Technical manufacturer's description: Planing width: 410 mm Total table length: 2600 mm Table height: 855 mm Feed table length: 1450 mm Aluminum planing fence swivels up to 45° Planing fence dimensions: 1100 x 170 mm 4-knife planing shaft diameter: 120 mm Knife shaft speed: 5000 rpm Motor power: 4 kW TERSA monobloc one-way reversible cutterhead SCM dressing protection device integrated in machine stand 120 mm diameter extraction nozzle Manual star-delta switch Motor protection switch, undervoltage release Lockable main switch Automatic motor brake Pivoting auxiliary fence ----- Price of the above machine on request! ----- Godpfxowzmu Do Ag Nsuh (technical data according to manufacturer - without guarantee!) All prices quoted are net and subject to VAT.

Condition: good (used), flat gear motor, geared motor, electric motor, electric gear motor, flat gear motor, flat gear motor Guedpot Hy Thjfx Ag Neh -Manufacturer: KEB, flat gear motor -Type: F 4.2 C DK 100 LX 4 W TW i= 11.38 -Speed: 50 rpm -Engine: Type SK 100 L/40 -Power: 3.0 kW / 1410 rpm -Hollow shaft: Ø 40 x 150 mm -Protection class: IP56 -Dimensions: 445/230/H360 mm -Weight: 60 kg

Condition: ready for operation (used), Indramat MDD093B-F-020-N2L-110GA0 Permanent Magnet Motor SN:MDD093-13387, used, normal signs of use, 100% functional, scope of delivery as per photos Gujdpji D Ivpsfx Ag Nsh

Condition: ready for operation (used), Indramat MDD093B-F-020-N2L-110GA0 Permanent Magnet Motor SN:MDD093-10926, used, normal signs of use, 100% functional, scope of delivery as per photos Gujdpfx Agei D Ivho Nsh

Condition: ready for operation (used), Indramat MAC112C-0-KD-3-F / 130-A-0 Permanent magnet motor SN: 58102 ,used, normal signs of wear, 100% functional, scope of delivery according to photos Godpfx Agei D Iqre Nsuh

Condition: ready for operation (used), Indramat MDD093B-F-060-N2L-110GA0 Permanent Magnet Motor SN:MDD093-16119, used, normal signs of use, 100% functional, scope of delivery as per photos Gusdpfx Aoi D Iv Neg Nsh

Condition: ready for operation (used), Rexroth MDD093B-F-020-N2L-110GA1 Permanent magnet motor R911275029 SN. ; MDD93-26751 , professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos,For this item, the agreed sales discounts do not apply. Price please ask separately! Guodpfei D Ng Ssx Ag Neh

Condition: ready for operation (used), ABB 05GV20 f-E AXODYN servo drive SN:GN6100673/004 , the servo drive was overhauled by ABB, used, normal traces of use, 100% functional, scope of delivery according to photos Gedpfx Agsi D Tq Rj Neuh

Condition: ready for operation (used), Rexroth MDD093B-F-020-N2L-110GL0 SN:MDD093-5842, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos, the agreed sales discounts do not apply to this article. Please ask for price separately! Guodpfxji D Nhao Ag Noh

Condition: new, Rexroth MDD093C-F-030-N2L-110GA2 3-phase permanent magnet motor, MNR: R911258045 , SN:7162006000401 ,unused in opened original packaging, 100% functional, scope of delivery according to photos Gusdpfx Aei D Nhhsg Neh

Condition: ready for operation (used), Siemens 6FX1113-0AA01 SINUMERIK MS100 E Stand F / 01 SN:1143 + 6FX1191-2AA00 , used, normal traces of use, 100% functional, scope of delivery according to photos Guedpfx Asi Ed I Nog Njh

Condition: ready for operation (used), Indramat MDD093B-F-020-N2L-110GA0 Permanent Magnet Motor SN:MDD093-13807, used, normal signs of use, 100% functional, scope of delivery as per photos Guedpfxoi D Ivws Ag Neh

Condition: ready for operation (used), Indramat MDD093B-F-020-N2L-110GA0 Permanent Magnet Motor SN:MDD093-13388, used, normal signs of use, 100% functional, scope of delivery as per photos Gusdpfx Aoi D Ivtsg Neh

Condition: ready for operation (used), Siemens SITRANS F C MASSFLOW MASS 2100 FDK: 083L2551 flow meter, SN:200271N284, used, normal signs of use, 100% functional, delivery as shown in photos. Guodpfx Ajxahuteg Neh