Used Holz Her Edgebander for sale (171)

Condition: used, Year of construction: 2007, Panel dividing saw Manufacturer: HolzHer Type: 6310 CUT 110 Year of manufacture: 2007 Technical data - Cutting length: 4250 mm - Cutting width: 5250 mm / reduced by 2550 mm to 2700 mm - Display on the right - Cut Control control system with touch screen operation - Angle pressing device on the right - Saw carriage with main/scoring saw control - Power: 18.5 kW / 2.2 kW - Manual adjustment of scoring saws in width and height - Grooving device with 2 groove height settings (groove depth adjustable from 2-12 mm, up to max. 9-19 mm) - Label printer TLP2742 - Cut-out device - Additional blowing device on the saw carriage - 3 additional support tables, 2400 mm, with drive system - Control cabinet on the machine side including speed monitoring with safety shutdown - Postforming unit including scoring unit - Automatic central lubrication Bljdpjzuy Nlsfx Adhsp - Closed pressure beam - Film cutting device Optional, at an extra charge: Extraction system Manufacturer: AL-KO Type: POWER UNIT 300P Year of manufacture: 2011 Technical data - V = 5089 m³/h - Vacuum: 2050 pA - Motor power: 7.5 kW - Suction nozzle 300 mm - 3 collection containers, 250 l each - Integrated extinguishing system Note: The technical data and descriptions are copies of the original order confirmation. The information is for informational purposes only and is not binding.

Condition: used, Year of construction: 2023, functionality: fully functional, workpiece height (max.): 60 mm, HOLZ-HER CNC - Dowel Drilling & Insertion Machine POWER - PIN 7605 Workpiece thickness: 12 - 60 mm Workpiece width: minimum 150 mm (horizontal & vertical processing) Workpiece length: min. 60 mm, max. unlimited (limited when using positioning stops) Software: Campus V8 Power-Pin (1x license) Continuous LED strip for easy orientation and status indication Dowel insertion unit DA102 for pre-glued dowels as well as for untreated dowels when used with white glue Glue application system LS2 with electronic monitoring of the nozzle needle ECO MODE for energy-efficient operation Drilling unit BA102 (horizontal), 3-spindle MOT3 package – motorized adjustment of drilling depth 2D barcode scanner 21.5" touchscreen The POWER-PIN dowel machine is suitable both as a standard dowel machine and as an ideal addition to, for example, nesting or console machines. From cabinet furniture to premium solid wood drawers from 12 mm material thickness, the 7605 is the ideal solution for precise drilling and insertion of wooden dowels. The continuous LED strip provides constant machine status indication and assists the operator by showing the correct workpiece position for insertion. The integrated barcode scanner can be used to read DataMatrix codes, for example, which contain all machining information about the workpiece. Drill positions and drilling depths are automatically set and approached by the machine – ensuring maximum precision and efficient operation. The machine has been refurbished at the Voitsberg factory and the software has been updated to the latest version available at the time of refurbishment! Delivery, installation, and commissioning training for the machine can be arranged directly with us at an additional cost. The machine is currently located at our delivery warehouse in Gratwein, Austria. In case of discrepancies between the German version and a foreign language version, only the German version shall be legally binding. Our General Terms and Conditions can be found on our website at holzher.de/de/agb. Bodpfx Aeyzg Dfedholp

Condition: excellent (used), Year of construction: 2019, I sell the fully equipped edge banding machine Holz-Her Streamer 1057 XL, year 2019: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding EVA glue / PUR glue possible Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Corner rounding 1-motor manual adjustable Radius R2 scrapers pneumatic adjustable Clue scrapers pneumatic adjustable Cleaning brushes top + bottom Cleaning fluid spray front + back Blodpfxszr Rwhe Adhep Control panel Working thickness adjustment manually Material height 8-60mm Edge thickness 0,4-8mm Feeding speed 10m/min. Total length including feeding plate 4200mm Very good condition, fully working! Including full documentation and CE. Available immediately.

Condition: good (used), Year of construction: 1988, Work piece thickness 0,4 - 8 mm Work piece height max. 51 mm Min. work piece width 50 mm min work piece length 180 mm edge magazine for PVC and strips Bsdpfx Aebahd Ejdhjlp pneumatic pressure rollers for edge magazine edge snipping unit cutting unit with 2 saws milling aggregate buffing unit Feed speed 11 m/ min Glue application with fin nozzle Air pressure 6 bar length 3750 mm

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Condition: Function tested Equipment and technical data: Milling unit: 4.4 kW Tool holder: HSK 63 F Speed: 1,000 - 18,000 rpm Water-cooled Tool changer: 4-position, lateral Drilling head: 9 vertical drilling spindles on a 32 mm pitch Horizontal drilling spindle: 1+1 Vertical drilling spindle: 1+1 Grooving saw in X-direction Control: Twin CAM 32 Vacuum pump: 40 cbm/h Including vacuum suction cups Travel paths: X-axis: 2,685 mm Y-axis: 1,095 mm Z-axis: 140 mm Weight: approx. 3,500 kg The machine is completely checked for all mechanical, electrical, and electronic components and overhauled where necessary. All guides checked; console guides replaced New PC control system for the TWIN CAM control Bodpfxew I Ug Hs Adhslp All axis modules checked and serviced Location: Flörsheim Availability: by arrangement

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Blsdpfovvkfdsx Adhjp

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, workpiece length (max.): 3,200 mm, workpiece width (max.): 920 mm, workpiece height (max.): 70 mm, number of slots in tool magazine: 6, actuation type: pneumatic, total height: 2,350 mm, total length: 3,675 mm, total width: 1,660 mm, overall weight: 2,500 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, HOLZ-HER Vertikale CNC Evolution 7405 4mat, Baujahr 2014, Lieferung ab Standort Bearbeitungslänge: 3.200 mm Werkstückabmessungen: X = 200 – 3.200 mm (bei zusätzlicher Auflage auch länger möglich) Y = 70 – 920 mm Werkstückdicke: Z = 8 – 70 mm Maximale Bearbeitungslänge auf X-Achse ohne Umspannen: X = 1.500 mm Z-Achsen-Verfahrweg = 240 mm Maximal programmierbare Geschwindigkeit: Vektorgeschwindigkeit: 68 m/min X = 25 m/min, Y = 60 m/min, Z = 20 m/min Software: CAMPUS V6 – Single Evolution 19-Zoll TFT-Flachbildschirm Höhenverstellbarer Rollentisch zur 4-seitigen Bearbeitung. Komplette Formgebung der Werkstücke durch präzises Fräsen aller vier Seiten möglich. Druckluft-Vakuumsystem Absaugung am Werkzeugkopf 2D Barcode-Scanner Bohraggregat 7883, 15 Spindeln, 1,7 kW Leistung (9 vertikal, 6 horizontal) Performance-Paket, bestehend aus: 7830 Fräsaggregat 6,5 kW (S6) HSK F-63 Blodpfxey Ny Uys Adhjp Werkzeugwechsler 7887 mit 6 Werkzeugplätzen (Pick-up-Typ) Manuelle Schmierung, kombinierter Schmierversorgungspunkt

Year of construction: 2018, condition: ready for operation (used), travel distance X-axis: 3,700 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 120 mm, total width: 4,600 mm, total height: 2,500 mm, spindle motor power: 10,000 W, product length (max.): 13,500 mm, spindle speed (max.): 24,000 rpm, number of axes: 5, This 5-axis HOLZHER Dynestic 7535 was manufactured in 2018. It features a working area of 3700 x 2100 x 120 mm and a powerful 10 kW spindle with a speed of 24,000 rpm. The machine includes an 18-position tool changer and a complete CNC nesting solution for high-performance cutting and drilling capabilities. If you are looking to get high-quality woodworking capabilities, consider the HOLZHER Dynestic 7535 wood mill we have for sale. Contact us for further details. • Control: Beckhoff TwinCAT 2 (PC-based) • Software: WorkCentre, NC-Hops, Cabinet Control, CAMPUS v7 • Tool holder: HSK-F63 • Tool changer: 18 positions (gantry-mounted) • Drilling unit: 10 vertical, 3 horizontal (4 X, 2 Y) • Saw unit: Groove saw integrated in X direction • Table type: Matrix table (gantry construction) • Automatic tool measurement: up to Ø20 mm Bedpozug D Asfx Adholp • Power: 22 kW • CE marked • Key features: Complete CNC nesting solution; high-performance cutting and drilling; advanced control with DXF compatibility; auto lubrication and cooling system; offline programming capability included • Additional services available upon request: • Mechanical and electrical decommissioning, as well as installation support • Basic application training (HOPS), depending on the operator’s experience • After-sales service, including warranty and potential service interventions handled by the seller (T&Cs apply)Please feel free to ask us for detailed pricing regarding these additional services. Additional equipment • Vacuum system: Becker, 250 m³/h • Air cushion table for easy material handling • Zoned safety mats for safe loading during operation • Additional saw blade holder (up to Ø350 mm)

Condition: like new (used), Year of construction: 2021, functionality: fully functional, workpiece length (max.): 4,600 mm, workpiece width (max.): 2,200 mm, workpiece height (max.): 250 mm, Equipment: rotational speed infinitely variable, Holz-Her 5-Axis CNC Nesting Machining Center DYNESTIC 7535 Working area: 4600 x 2200 mm. Vector speed is 128.0 m/min. The milling spindle has a power output of 13.0 kW (S6) and accommodates tools with a maximum diameter of 350 mm via HSK interface. Drilling unit with 24 spindles – 18 vertical and 6 horizontal. The maximum drilling diameter is 35 mm. For grooving, the drilling head is equipped with an integrated saw unit for blades with a maximum diameter of 125 mm and a maximum width of 4 mm. 18-position disc tool changer, pneumatically liftable and covered to protect the HSK 63F holders, as well as a single-position pick-up changer for saw blades up to 350 mm in diameter. Pneumatically retractable stops in the table for special machining either on the nesting table or using vacuum pods. Bljdpfex E Ah Iex Adhep Vacuum capacity of 750 m³/h, distributed across 2 pumps with 500 m³/h and 250 m³/h respectively, intelligently controlled by ECO-VAC software. To optimize vacuum efficiency, the table features a 16-zone vacuum system. The pre-installed pusher unit is connected to the extraction system and can be used for panel cleaning and/or clearing the nesting table. Delivery, installation, and machine commissioning training available directly through us at additional cost. The machine is currently located at our shipping warehouse in Gratwein, Austria. In case of discrepancies between the German version and any foreign language version, the German version shall prevail. Our general terms and conditions can be found on our website at holzher.de/de/agb.

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 Equipment and technical data: Cutting length: 5300 mm Cutting height: 2200 mm with Super Cut scoring device Includes: intermediate workpiece support on 3 supports Bsdpfxoz Dyd Ee Adhjlp Includes: 2 units of longitudinal stop with manual scale Availability: short-term Location: Flörsheim

Condition: ready for operation (used), Year of construction: 2009, machine/vehicle number: 26, functionality: fully functional, input voltage: 400 V, total height: 1,700 mm, total length: 6,100 mm, total width: 1,450 mm, overall weight: 2,500 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of units: 7 1. Unit: Pre-milling unit Tools included 2. Unit: Gluing unit 3. Unit: Crosscut unit Tools included 4. Unit: Rough milling unit Tools included Bsdpfxoz Eahge Adhjlp 5. Unit: Edge rounding unit Tools included 6. Unit: Radius drawing unit Tools included 7. Unit: Flat drawing unit Tools included MACHINE DETAILS Voltage: 400 V Current consumption: 39.5 A Fuse rating: 50 A Number of transport packages: 1 Dimensions & Weight Dimensions (L x W x H): 6,100 x 1,450 x 1,700 mm Weight: 2,500 kg EQUIPMENT Tools for pre-milling unit Tools for crosscut unit Tools for rough milling unit Tools for edge rounding unit Tools for radius drawing unit Tools for flat drawing unit CE marking

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Equipment and technical data: Machine is completely workshop overhauled! Automatic horizontal and vertical positioning for absolute and incremental dimensions Bedpsw Nac Aofx Adhelp Digital readout for horizontal cuts PLC control with a 2-line display and plain-text error diagnosis for operation mode and fault diagnosis Infinitely variable feed speed up to 24 m/min Automatic workpiece end detection Calculator function integrated in the control panel (calculation of workpiece dimensions) Cutting length: 4300 mm Cutting height: 2200 mm Max. trimming height: 2100 mm Max. scoring height, vertical: 2100 mm Max. cutting depth: 80 mm Motor: 5.5 kW Saw blade speed: 4,500 rpm Saw blade diameter: 300 mm Air requirement: 1,200 m³/h Air velocity: 20 m/s Static negative pressure: 1,200 Pa Extraction connection: 2 x 120 mm Dimensions (L x W x H): 5,620 (plus extraction nozzle) x 1,480 x 2,948 mm Room height: 2,990 mm Compressed air connection: 6 bar Air consumption: 50 NL/min Electrical connection load: 5.7 kW With Supercut pre-scoring unit With pneumatically swiveling saw unit With longitudinal stop for lower workpiece support With short folding rail, complete Availability: by arrangement Location: Flörsheim

Condition: used, Used machine Equipment and technical specifications: Automatic edge feeder Cartridge glue system 4-roll printing unit Cross-cut saw unit Flush trimming unit Combination trimming unit: flush/bevel/radius Radius scraper Buffing unit Edge band thickness 0.3 - 20 mm (depending on unit) Edge band height max. 66 mm Edge band length min. 200 mm Feed rate 8/16 or 12/24 m/min With LIGMATECH workpiece return system The return line of this return system is located above the panel processing level. The workpieces move back to the operator on an inclined plane. Special features compared to the ZHR 0x models: Automatic detection and rotation of parts from transverse to longitudinal Automatic adjustment of the rotation speed to the workpiece length Minimum and maximum workpiece dimensions For longitudinal edge processing: 2200 x 1000 For transverse processing with subsequent rotation: 250 x 120/2200 x 800 Maximum workpiece thickness: 60 mm Bsdpfow Nad Hsx Adhslp Location: Bavaria Availability: Short-term

Condition: like new (used), Year of construction: 2004, I sell the panel beam saw HOLZ-HER CUT85. Year 2004. Cutting size 3200x3200mm. Cutting height 85mm. Max saw blade diameters 350 + 180mm Main motor 11kW Blodsppwtvspfx Adhop Scoring motor 2,2kW Total power 15kW Total area covered W.5636mm x D.6520mm 6 pcs. gripper with pneumatic regulation Side alignment top roller with pneumatic stroke. Optimising software included. Label printing included. Very good condition. Available immediately.

Condition: new, Panel saw HOLZ-HER 1255 SECTOR pro - Exhibition machine - Cutting height 2,200 mm Cutting length 5,300 mm Vertical perfection from HOLZ-HER The vertical panel saws from HOLZ-HER combine proven technology from over 50 years of experience and a rock-solid design that offers you a unique price-performance ratio. offer you a unique price-performance ratio. Your advantages: - Fully welded frame Extremely high rigidity - Precise cutting quality - Finished cut for immediate edge banding - Powerful saw motor with 4 kW output - Space-saving panel layout with a installation area from 4 m² - Smooth and ergonomic operation TRK extraction system (optional in all CE countries): Workstations must meet the highest requirements when it comes to health and safety. HOLZ-HER saws are among the cleanest and safest in the safest in the world. Accessories The extensive range of accessories extends from convenient digital dimension displays through to our our patented Super Cut plus scoring system. TECHNICAL DATA Vertical panel saw for cutting panel-shaped wood materials wood-based materials such as chipboard, MDF, veneer panels, multiplex, etc, veneer panels, multiplex etc. Basic machine: Completely welded frame with extremely high rigidity. Precise guidance of the saw beam / saw unit saw unit for an accurate cut. Manual feed feed for vertical and horizontal cutting. Cutting depth: max. 60 mm Saw beam: Sturdy saw beam guided on precision guides. Pneumatic locking of the saw beam at the top and bottom. Electrically monitored in vertical cut Saw unit: Smooth and ergonomic operation for plunging and and removal of the saw unit. Immersion lever can be lever can be folded down in the upper position for precise immersion of the saw unit. Generously dimensioned lever for easy pivoting. Housing cover opens the complete opens the complete saw unit for easy tool change change incl. ProLock quick-action chuck. Light cut-out: Riving knife can be retracted. Control panel: Efficient operation of the machine. Ergonomically positioned at eye level. Lower workpiece support: Sturdy, wear-free stainless steel support. Support up to the cutting line: Narrow workpieces cannot tip or fall through Extraction: Bljdpsu R Syijfx Adhsp Effective extraction with two connections: Saw unit Ø 120 mm, frame end Ø 100 mm (with TRK variant) Lifting roller transport system: Manually liftable and lowerable rollers for easy and and gentle panel transport. Measuring tape: For displaying dimensions for horizontal cutting with three manual dimension displays: Absolute dimension from the lower workpiece support Absolute dimension from the middle workpiece support Serial cuts from the top edge of the panel This offer is an equipment package. The following items and options are already included in the price: - Sliding grid - Manual longitudinal stop for vertical cutting - Digital dimension display for horizontal cut - 3 adjustable stop points in the saw beam - TRK SH 2.200 suction device - Strip stop for recurring horizontal cuts - new exhibition machine -

Condition: used, with new feed rollers used good condition cleaned functionally tested Manufacturer: Holz-Her Type: ET 117 Machine No.: 7901 Motor with pole change, 2 speeds Roller diameter mm: 110 Roller width mm: 50 Number of feed rollers: 3 Speeds m/min: 4, 6, 8, 12, 10, 15, 20, 30 Weight approx. kg: 50 Blodpjz I Uduofx Adhjp Location: 97447 Gerolzhofen, free loading, unpacked Handover in current condition, as inspected, without warranty or guarantee.

Condition: used, operating hours: 11,517 h, total height: 2,880 mm, total length: 10,000 mm, total width: 2,700 mm, Year of manufacture: 2014 Colour: White Empty weight: 6.000 kg - Year: 2014 - Documentation available: No - CE certificate present: No - Serial number: 070614/B/1-407 - Operating hours: 11517 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 4 - - Main motor power [kW]: 10 - - C-axis present: Yes - Type milling table: Flat table - Drilling unit present: Yes - └ Motor power [kW]: 3.6 - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 18 - Tool changer positions [pcs.]: 12 - System/software: TWINCAT - Safety feature: Safety mat, Enclosed fence - Vacuum pump present: Yes - └ Number [pcs.]: 2 - └ Brand: Becker - └ Year of manufacture: 2023 - └ Main motor power [kW]: 18.5 - └ Capacity [m³/h]: 600 - └ Vacuum pressure [bar]: 250 - └ Oil free: Yes - CNC documentation available: USB stick - Table length [mm]: 5150 - Table width [mm]: 1600 - Working range X [mm]: 7220 - Working range Y [mm]: 1580 - Z-axis working range [mm]: 180 - Voltage [V]: 400 - Transport dimensions: 10000mm x 2700mm x 2880mm (l x w x h) - Transport weight [kg]: 6000kg Financial information VAT: The price shown is exclusive of VAT Bsdpfxox E Uk Ue Adhjlp VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2019, Holz-Her Dynestic 7532 10.5 automatic CNC nesting machining center with Holz-Her Store-Master 5110 panel storage system Used machine Year of manufacture: 2019 Features and Technical Specifications: Bedpjzlbrpefx Adhslp - Designed for classic nesting machining with a wear plate - Welded machine frame with ground and hardened prismatic guides for the traveling column, toolhead, and consoles - Gantry-style moving column - Rack-and-pinion drive, helical teeth, in the X and Y directions; ball screws in the Z direction for precise positioning - Machining dimensions: - Max. support area on nesting table: X = 3100 mm Y = 1560 mm - Max. travel ranges: X = 4695 mm Y = 2100 mm Z = 293 mm - Max. clearance height of DYNESTIC table Z = 100 mm from top edge of table (without wear plate) - Maximum programmable speed Vector speed: 128 m/min X = 80 m/min Y = 100 m/min Z = 25 m/min - DYNESTIC table: - Rigid, continuous machining table with grid markings - continuous slots in the X and Y directions - Slot spacing: 50 mm - Includes 25 meters of sealing cord for securing the wear plate - Vacuum fields: 1-circuit vacuum system - Drilling unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - individually controllable - U-shaped arrangement - 5 in the X direction and 4 in the Y direction - 32 mm pitch - Max. drill bit diameter: 35 mm - Total drill length: 70 mm from the mounting end (depending on plate thickness) - Spindle extension stroke: 70 mm - Rotation direction: Alternating clockwise and counterclockwise - n(max): 1,000–4,400 rpm, continuously adjustable - Mounting: M10 thread – 11 mm interference fit - Tool-free, without mounting - 6 horizontal spindles: - 2 dual-spindle units in the X direction - 1 dual-spindle unit in the Y direction - Mounting: M 10 thread, 11 mm interference fit - Total drill length: max. 63 mm from mounting end - Tool-free, without chuck - Milling unit 7842: - Power: 12.0 kW (S6) - n(max) = 1,000–24,000 rpm, continuously variable - Max. power at 12,000 rpm to 24,000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand threaded nut (for right-hand rotating tools) - With collet chuck with HSK shank - Ceramic ball bearings (hybrid bearings) - Max. tool weight: 6 kg (including holder) - Tools: Milling and grinding tools, max. Ø 160 mm - Safety guarding in accordance with CE standards - Protective guard on the sides and rear - Vacuum pump: 500 m³/h, dry-running - Operator safety via light curtains in the front area of the machine - Handheld control unit for remote control of the machine with the following functions: - Start/Stop of the machining program - Speed control of the machining cycles - Reset button - Manual feed/rapid traverse for all axes - Emergency stop - CAMPUS V7 CAD/CAM software (1 machine license) consisting of: - CAMPUS NC-HOPS: - Graphical variant system with WOP and CAD/CAM features for creating part variants using macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic centralized lubrication - Automatic lubrication according to defined lubrication intervals - Additional dust sealing via positive pressure in each guide carriage - Simultaneous lubrication: - for all linear guides in the X, Y, and Z directions - for all ball screws in the Y and Z directions - for all milling s...

Condition: used, Second-hand 4-roller feed unit with stand from HOLZ-HER, model ETZ, for feeding workpieces in woodworking. The machine is suitable for continuous feeding in various woodworking applications. Includes new rubber rollers. Bljdozymtzspfx Adhjp Technical data: - Feed speed: 2–30 m/min

Year of construction: 2010, condition: excellent (used), I sell the automatic vertical saw without scoring knives HOLZ-HER Supercut. Cutting range 5300x2200mm Bsdpfxepl Svce Adhslp Motor 3,0kW. Cutting head tilting 0-90° Main saw blade 240-250mm / 2850rpm. Condition very good. Available immediately.

Condition: excellent (used), Cutting height: 210 cm Cutting length: 500 cm Cutting depth: 60 mm Engine: 4 kW Overall dimensions: Length 600 cm, Height 300 cm, Width 160 cm Bljdpfezi Dm Rox Adhsp

Condition: used, Holz Her Sprint 1312 FÜ + PU Heavy-duty design – edge thickness 0.4 - 12 mm PLC screen control Pre-milling unit for application before the gluing section Fully automatic edge magazine for roll and strip material Glue application station for cartridges + PU bonding automatic tracing nozzle Workpiece height 6-55 mm End trimming unit for roll and strip material up to 12 mm edge thickness with adjustment from 0-10° angle of the trimming saws Bledox Eilqjpfx Adhjp Milling unit, flush milling up to 12 mm, radius milling – bevel milling - 15° motorised - 4 axes Scraper unit for bevels and radii with 2 pneumatically operated scraper holders pneumatic infeed and outfeed Flat scraper unit – finishing Spray device – PU Machine in TOP CONDITION Available from stock Lieboch

Condition: used, Year of construction: 2004, Used Machine Year of Manufacture: 2004 Features and Technical Specifications: Base Machine: - Single-arm traveling column - Welded machine frame with ground prismatic guides - Rack-and-pinion drive in the X direction, ball screws in the Y and Z directions for precise positioning Machining dimensions: - Max. workpiece size for milling, minus cutter radius (tool diameter 25 mm): X = 3,015 mm, Y = 1,282 mm - Maximum travel ranges: X = 3,268 mm, Y = 1,483 mm, Z = 325 mm - Maximum programmable speed X = 78 m/min. Y = 78 m/min. Z = 26 m/min. Workpiece support with 4 brackets, pneumatically clamped; each bracket has 1 stop pin at the rear and 2 vacuum cups per bracket Display and definition in the program: - 2 side stops (right and left) - 2 large push buttons for clamping and releasing workpieces - 2 mounts for unused suction cups - 2 tape measure displays for positioning the brackets in the X-axis, relative to the left and right stops. Bjdpfxe Af I Upe Adhelp - Rear stop or, alternatively, stops in the X and Y directions mounted at the front instead of the rear Drilling unit 7964, 18 spindles: - Drive power 2.2 kW - 14 vertical spindles, individually controllable, arranged in a T-shape, 10 in the X-direction and 4 in the Y-direction - 32 mm pitch - Max. drill bit diameter: 35 mm - Total drill bit length: 70 mm from the mounting end (depending on panel thickness) - Spindle extension stroke: 70 mm - Rotation direction: Alternating clockwise/counterclockwise, n(max.) 1,000 – 4,390 rpm, continuously adjustable - Mounting: M 10 thread – interference fit, diameter 11 mm - 4 horizontal spindles - 1 dual drilling spindle in the X direction - 1 dual drilling spindle in the Y direction - Mounting: M 10 thread – interference fit, diameter 11 mm - Total drilling length: max. 70 mm from the mounting end - Space available for: Optional dual drilling spindle in the X-direction or vertical adapter with double feed force Saw unit 7945: - Power: 1.5 kW - n(max.) = 1,000 – 4,850 rpm, continuously variable - 90° pneumatically swiveling for sawing/grooving in the X and Y directions - Tool holder: A diameter = 150 mm, I diameter = 30 mm, B = max. 8.0 mm Milling unit 7930: - Power: 6.0 kW (S6) - n(max.) 1,000 – 18,000 rpm, continuously adjustable - Liquid cooling - With HSK 63 F tool holder, with right-hand threaded nut (for right-hand tools) - With collet chuck with HSK shank - Ceramic ball bearings (hybrid bearings) - With pneumatically height-adjustable exhaust hood - Tool weight: max. 6 kg (including holder) - Tools: Milling and grinding tools, max. diameter 160 mm - 2 machining areas, each with 3 pneumatically controlled stop pins (standard at the rear, optional at the front) - Vacuum pump 40 m³/h, water-cooled with milling spindle cooling - Safety enclosure in accordance with CE standards - Selective safety foot mats (3-section layout) in the work area - Manual lubrication for all linear guides in the X, Y, and Z directions, for all milling spindle guides, for all console guides, and for all unit guides Control system: - PC control system with 17-inch monitor - Windows 2000 operating system - RJ45 network connection, 10/100 Base-T Fast Ethernet; processor clock speed: 2.4 GHz - US keyboard and Microsoft InteliEye mouse (optical) - Integrated 56K remote maintenance modem for data transfer - 3½-inch floppy disk drive, CD-ROM drive (CD burner) - TwinC...

Condition: used, Year of construction: 2002, - Panel length: 4.5 m - Panel height: 2.2 m - Without scoring blade Used vertical panel saw Bjdpfxjzuyykj Adhslp Manufacturer: Holzher Type: 1255 Year of manufacture: 2002 Not refurbished - no warranty Technical data - Panel length: 4.5 m - Panel height: 2.2 m - Without scoring blade Note: The technical data and descriptions are taken from the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 1981, used, good conditionMake Holz-HerType 1215Year of manufacture 1981MachineNo. 710motor 4.0 kWcutting length approx. 5300 mmcutting height approx. 2100 mmcutting depth 80 mmsaw blade diameter approx. 300 x 30 mmfree-standingslatted frame moving awayspace requirement approx. 6550 mm x 1265 mm x 2895 mmweight approx. 1000 kgstorage location 97447 Gerolzhofen, free loaded, unpackedhandover in as-is condition as inspectedwithout guarantee and warranty Blsdpfjvwfmxsx Adhop