Used Holz Her Evolution 7405 for sale (163)

Condition: used, Used machine Equipment and technical specifications: Hsdpfsw Nad Hex Aacsw Automatic edge feeder Cartridge glue system 4-roll printing unit Cross-cut saw unit Flush trimming unit Combination trimming unit: flush/bevel/radius Radius scraper Buffing unit Edge band thickness 0.3 - 20 mm (depending on unit) Edge band height max. 66 mm Edge band length min. 200 mm Feed rate 8/16 or 12/24 m/min With LIGMATECH workpiece return system The return line of this return system is located above the panel processing level. The workpieces move back to the operator on an inclined plane. Special features compared to the ZHR 0x models: Automatic detection and rotation of parts from transverse to longitudinal Automatic adjustment of the rotation speed to the workpiece length Minimum and maximum workpiece dimensions For longitudinal edge processing: 2200 x 1000 For transverse processing with subsequent rotation: 250 x 120/2200 x 800 Maximum workpiece thickness: 60 mm Location: Bavaria Availability: Short-term

Condition: used, Holz Her Accura 1556 Premium Heavy-duty version with full equipment Edge thickness: 0.4 – 20 mm 18.5" touchscreen control in 16:9 format, rotatable and tiltable Synchronized belt bridge with motorized, position-controlled height adjustment Long, motorized, adjustable infeed fence Pre-milling unit for processing before glue application station with 2 NC servo axes Syncro edge magazine, fully automatic for coil and strip material MOT3, with 2 motorized hold-down devices GLU-JET automatic gluing unit. Cartridge + PUR bonding. Thin-film technology Adhesive height adjustment / contact nozzle Maximum edge height: 60 mm Hedpsxnmu Ijfx Aacjw Pressure unit with 4 motor-pneumatic rollers. NC servo axis End trimming unit for coils and strips up to 20 mm edge thickness, with electro-pneumatic adjustment of the trimming saws from 0–10° bevel Flush milling unit 20 mm MOT3, motorized horizontal adjustment Multi-function milling unit MOT6 with multifunctional milling technology Flush milling 8 mm Radius milling R1, 3; R2 (2x) Bevel milling up to 45° Copy milling unit MOT4, with automatic tool changer MOT2 and oscillating probe, corner copying, postforming corners, with 4 NC control axes, for milling top and bottom longitudinal edges and copy milling of the front and rear vertical end edges. Working height 60 mm. Radius R1, 3; R2 (2x); bevel 45° Scraper unit MOT8 incl. high-gloss package and fully automatic tool changer, R1; R1.3; R2 (2x); 45° bevel Nesting package Surface scraper unit with pre and post sensor Demand-controlled, oscillating buffing unit for final cleaning and edge polishing with 2 textile wheels Spraying equipment at infeed and outfeed, as well as antistatic agent at the pressure unit Infeed area with electronically controlled separating agent spraying device Pressure unit with electronically controlled antistatic agent spraying device Outfeed area with electronically controlled cleaning agent spraying device including cleaning agent Automatic chain lubrication Barcode scanner MACHINE IS FACTORY SERVICED AND IN TOP CONDITION Year of manufacture: 2021 / Leasing options available Machine is connected and ready for demonstration at the exhibition center Available from stock Lieboch

Condition: used, Year of construction: 2014, machine/vehicle number: 194/1-406, Laufrichtung der Platte : vom Bediener nach rechts max. Anleimerstärke : 3 mm min. Werkstückdicke : 8 mm max. Werkstückdicke : 60 mm min. Werkstückbreite : 65 mm min. Werkstücklänge : 160 mm Vorschubgeschwindigkeit : 10 m/min Fügeaggregat : Ja, mit 2 Fräsaggregaten Fügewerkzeug : Diamant- Fräser Durchmesser: 70 mm Höhe: 48 mm Verstellung des Einlauflineals : manuell Kappschere bis : 3 mm Einzelzuführung der Kante : möglich Beleimung : GlueJet Pu- Beleimung : möglich Kappsäge : Ja Hsdpfxew R Hiro Aacow Kombiaggregat Bündig/Fase/Radius : pneumatisch zustellbar Abrundaggregat : pneumatisch zustellbar Stk Profilziehklinge : ja Flachziehklinge : Ja Aggregatenanzeige : am Display Steuerungsart : Über Endschalter Bedienung : Bedienpult mit Tasten Fahreinrichtung : Nein Ausziehbare Rollenauflage : Ja Schutzhaube : Ja Arbeitshöhe bzw. Aufgabetischhöhe : 874 mm Gewicht ca. : 1400 kg Absaugdurchmesser : 160 mm

Condition: excellent (used), Machining center HOLZHER Dynestic 7521 -used- Nesting table, pusher with suction device, unloading unit with conveyor belt, hardened, dust-protected prismatic guides, 2-sided guided portal design, helical rack and pinion drive (X- and Y-axis), Network card for remote maintenance, Control cabinet cooling with heat exchanger, manual control unit, Swivel saw unit, Plate tool changer on the move, incl. step mats, laser, Automatic central lubrication, New industrial PC, incl. nesting software with free-form boxes ----- Technical data ----- Processing length X: 4,600 mm, Processing length Y: 2,100 mm, max. traversing speed X: 80 m/min, max. traversing speed Y: 100 m/min, max. traversing speed Z: 25 m/min, Machine control software: CAMPUS HOPS, Motor power main spindle: 7.5 kW, Main spindle speed: 1,000 to 24,000 rpm, Hjdsu R Tcropfx Aacow Main spindle holder: HSK 63F, Spindle cooling: liquid, Motor power drilling unit: 3.0 kW, Mounting of drilling spindles: M10, fit 11 mm, Number of vertical drilling spindles: 18 pcs, No. horiz. Double drilling spindles in X-direction: 2 pcs, No. horiz. Double drilling spindles in Y-direction: 1 piece, Vacuum pump output: 500 m³/h, Suction connection Ø: 250 / 200 + 2x 80 mm, Compressed air connection: 6-8 bar, Compressed air requirement: 300 l/min. Quality info: - Complete basic cleaning - Electrics checked - Pneumatics checked - adjusted according to manufacturer's specifications - ready for immediate use

Condition: excellent (used), Year of construction: 2015, HOLZ-HER Sprint 1329 - Used edge banding machine in good condition. - Year of manufacture: 2015 - Includes BARBARIC return conveyor (year: 2017) Hodpfoxducrox Aacow - Available from end of November/beginning of December 2025 Please feel free to contact us if you have any questions.

Condition: used, Year of construction: 1999, Holz-Her SPRINT 1411 edgebander Description Workpiece thickness min./max. 6/45mm Automatic edge feeder (coil up to 5mm) Workpiece min. 60mm Workpiece length min. 180mm Cartridge glue system (short heat up time 2-3 min.) End trimming unit Flush trimming unit Scraping unit (flat) Buffing (brushing) unit Hodpfx Aasw Ebrxjcew CE (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen vorbehalten! Keine Garantie auf gedruckte Daten!. Verfügbarkeit vorbehaltlich Zwischenverkauf).

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Specifications and technical data: Base machine 1057 XL C with Beckhoff touch-screen control Extendable workpiece support 600 mm Extension for extendable outrigger Standard infeed fence 3 LED lights in the infeed area Jointing unit with two motors DIA jointing cutter 70 x 64 x 30 mm Z2+2, left and right rotation Edge feeding system 1903, fully automatic GluJet 301 adhesive application system Automatic reloading function Magazine for 1.4 kg adhesive cartridges (holds 4 cartridges) GluJet collection container Pressure unit 1912-3, pneumatic Spray device GM 201 after pressure unit End trimming unit 1918, pneumatic Extraction hoods for end trimming unit Hedpjw I U Rfefx Aacew Combined trimming unit FR201 with DIA cutters R=2 mm Contour trimming unit 1832 Shelf program Radius scraper ZK 301 Chip collection box Flat scraper FK 701 Spray device front and rear TR201 Buffing unit 1940 Availability: short-term Location: Flörsheim

Condition: used, Holz Her Triathlon 1488 FÜ + PU Heavy-duty model – edge thickness 0.4 – 25 mm SPS screen control Edge-Control Motor-driven, position-controlled height adjustment – belt bridge Automatic infeed fence Pre-milling unit for jointing in front of the gluing unit Fully automatic edge magazine for coil and strip material Hsdpfx Aaexm Spbocsw Gluing station for cartridge and PU bonding Glue application via nozzle technology Automatic glue height adjustment Workpiece height 6–60 mm Pressure unit MOT End trimming unit for coil and strip material up to 15 mm edge thickness, with pneumatic adjustment from 0–15° saw angle Milling units – flush trimming for coil and strip material with 0.4–20 mm edge thickness Profile milling unit for longitudinal and end processing of edges, working height 45 mm Scraper unit for bevels and radii with 2 scraper holders, pneumatically activated Flat scraper unit Demand-controlled buffing unit Automatic central lubrication for chain Electronically controlled spray system at infeed and outfeed The machine is FULLY FUNCTIONAL The machine is in operation and can be inspected and demonstrated at the seller’s site at any time Brokerage on behalf of customer Available ex location as inspected, without any warranty NET €8,000.00

Condition: good (used), Year of construction: 2004, I sell the 3-axis CNC working centre HOLZ-HER UNI-MASTER 7226 with beam table Year 2004. Configuration: 3-axis main spindle recently full reconditioned / Water cooled Tool magazine 6 positions HSK63 on working head 1 grooving saw X-direction Drilling head 16+4 spindles Useful working area 3100x1360mm. Hodpei U Dxujfx Aacow 2 working fields, 4 clamping areas Automatic central system of lubrication. Holzher software controller with full instructions. 2x Pump SIEMENS ELMO-L S22 2,35KW. Good condition. Available immediately.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, HOLZ-HER Dowel Drilling & Inserting Machine POWER-PIN 7605 • Minimum workpiece length 60 mm, maximum unlimited – limited only when workpieces are positioned against the stop elements. • CAPMUS V7x POWER-PIN software Hodsxdlwgepfx Aacsw • LED strip for easy orientation • Dowel insertion unit DA102 for pre-glued dowels, as well as use with raw dowels in combination with white glue. The POWER-PIN dowel machine – suitable as a standard dowel inserting machine or the perfect addition to, for example, nesting or console machines. From carcase furniture to high-quality solid wood drawers with a minimum material thickness of 12 mm, the 7605 is the ideal machine for drilling and inserting wooden dowels. The continuous LED strip displays the machine status and indicates to the operator the correct insertion position for the workpiece. A barcode scanner can be used to scan, for example, DataMatrix codes containing the processing instructions for the workpiece. Drilling positions and depths are automatically adjusted and approached by the machine. Also visit our Classic Shop on our homepage.

Year of construction: 1989, condition: good (used), - tilting spindle under the account - shaft diameter 50mm - up and down adjustment Hedogxpilspfx Aacjw - pneumatic adjustment of the spindle position - 400V power supply - THE FEED IS NOT THE SUBJECT OF THE OFFER

Condition: ready for operation (used), Year of construction: 2011, operating hours: 25,996 h, functionality: fully functional, machine/vehicle number: 55/1-105 15501954 BAZ11V3, travel distance X-axis: 6,566 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 445 mm, spindle speed (max.): 6,500 rpm, number of slots in tool magazine: 24, No minimum price – guaranteed sale to the highest bidder! Machine already dismantled TECHNICAL DETAILS Workpiece dimensions for cutting (without cutter radius): 6,225 x 1,595 mm Travel range X: 6,566 mm Travel range Y: 1,800 mm Travel range Z: 445 mm Vertical clearance standard consoles – 1st stroke: 498 mm Vertical clearance standard consoles – 2nd stroke: 598 mm Vertical clearance Vario table – 1st stroke: 445 mm Vertical clearance Vario table – 2nd stroke: 545 mm Speed Programmable vector speed: 142.0 m/min Speed X: 100 m/min Speed Y: 100 m/min Speed Z: 25 m/min Drilling unit Type: Drilling unit 7976, 24 spindles Drive power: 3.0 kW Vertical spindles Number: 18, selectable individually Arrangement: L-shape (10 in X axis, 8 in Y axis) Spindle pitch: 32 mm Max. drilling diameter: 35 mm Total drill length: 70 mm (from screw end, depending on panel thickness) Spindle stroke: 70 mm Rotation direction: alternating right-/left-hand Speed range (stepless): 1,000 – 6,500 rpm Connection: M10 thread – press-fit 11 mm Horizontal spindles Number: 6 In X axis: 2 double drilling spindles Spindle pitch (X axis): 32 mm In Y axis: 1 double drilling spindle Connection: M10 thread – press-fit 11 mm Total drill length: 70 mm (from screw end) Consoles & suction cups (VarioTable) Number of consoles (automatic positioning): 6 Hsdpfxewvi Ics Aacew Work consoles (automatic, X direction): 5, in zones A + D Suction cup holders per console (automatic, Y direction): 3 Vacuum suction cup per holder: 1, 80 x 80 mm with plunger valve Suction cover per holder: 1 Loading aids: 4 Rear positioning pin per console: 1 Note: Only 5 out of 10 consoles function correctly Saw unit / change-over unit Central unit: Central gearbox 7955, for saws (mainly solid wood) Tool holder: HSK-F 63 Max. output speed: 6,750 rpm Number of spindles: 1 Max. saw blade diameter: 220 mm Saw blade bore: 30 mm Driving pins: 2 x Ø 6 mm Clamp cover: self-locking Lubrication: oil sump lubrication MACHINE DETAILS Operating hours: 25,996 h Number of switching cycles: 965 x EQUIPMENT - Drilling unit with 24 spindles (vertical and horizontal) - VarioTable with automatically positionable consoles and suction cups - 4 loading aids - Center unit for sawing with HSK-F 63 holder - Saw blade holder up to Ø 220 mm with oil sump lubrication - New pump installed - Only 5 out of 10 consoles fully operational – long workpieces can still be held without problems - No tools included in delivery

Condition: used, Year of construction: 1989, -Used machine- Year of manufacture: 1989 Condition: Refurbished and operational Fully automatic, vertical design, Cutting area 5,300 x 2,200 mm (cutting width x cutting height), Saw blade diameter 300 mm, Control system for vertical and horizontal cuts, With ALU folding stops and ALU intermediate support, Hsdpfx Aexavq Nsacsw Prepared for Supercut With completely new housing including: - Pneumatics (plunge function) - Riving knife - Pressure shoe - Cover - V-belt pulley

Condition: used, Holz Her UNO 1303 + PU Edge thickness 0.4 - 3 mm (6 mm) Control panel with selector switches for aggregate setting Fully automatic edge magazine for both rolls and strips Glue application station: Cartridge + PU gluing Workpiece height 6-55 mm Pneumatic pressure unit Hodpfxoxlz Nze Aacew End trimming unit for rolls and strips up to 3 mm (6 mm) edge thickness With adjustable mitering of trimming saws from 0-10° Milling unit for flush milling, radius milling, and chamfer milling - 15° Scraper unit for chamfers and radii Surface scraper unit - finishing Machine is TESTED and in TOP CONDITION from a very well-maintained craft shop Available ex-stock Lieboch at INVENTORY CLEARANCE FIXED NET PRICE €8,900.00

Condition: excellent (used), Edge bander Holzher Streamer 1057 Pre-milling units Glue application, GLUE JET cartridge glue system Suitable for PUR glue Equipped with glue discharge Hjdpfjxf H Rdox Aacsw Pneumatic pre-cut guillotine Pressure rollers Final trimming saws, angle adjustable Top and bottom milling units R1, R2 Corner rounding unit Profile scraper Flat scraper Max edge banding height: 45 mm Max edge thickness in roll: 3 mm Machine length: 460 cm Feed speed: 10 m/min

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, travel distance X-axis: 3,747 mm, travel distance Y-axis: 1,554 mm, travel distance Z-axis: 325 mm, workpiece length (max.): 3,620 mm, workpiece width (max.): 1,500 mm, workpiece height (max.): 180 mm, Equipment: rotational speed infinitely variable, Holz-Her / Machining Center PRO-MASTER 7017 - 2 software licenses (Office & Machine) Campus V8 CAD / CAM software - Machining area for milling = 3425 x 1287 mm (minus cutter radius) - Maximum workpiece height: 180 mm, measured from the top edge of the vacuum cup: 125 mm. - Maximum pass-through width at hood: 1450 mm (Y-direction) - The milling spindle delivers 10.3 kW (S6) and accepts tools with a maximum diameter of 160 mm via HSK interface. - Vector axis / C-axis can be retrofitted - Drilling unit with 14 spindles: 10 vertical and 4 horizontal. Maximum drill diameter: 35 mm. Integrated saw unit for a saw blade with a maximum diameter of 125 mm and 4 mm thickness. Hsdpfxjxdlrdo Aacsw - 12-position linear pick-up tool changer for HSK 63F holders for tools up to a maximum diameter of 95 or 100 mm. Please also visit our "Classic Shop" on our homepage.

Condition: used, Year of construction: 2014, Used machine Year of manufacture: 2014 Features and technical data: - Extendable workpiece support - Joint milling unit FG201 with 2 milling heads incl. DIA cutters - Fully automatic edge feed 1903 - Glue application system cartridge GlueJet 301 with automatic glue height adjustment (sensor-controlled nozzle) - Special accessory: pressure regulation of cartridge contact pressure Hodpfx Aaoxavr Hjcew - Pressure section 1912-3 pneumatic, first roller driven with pneumatic plunge control - End trimming unit 1918, pneumatic adjustment - Milling unit FR 201 multifunctional milling unit for flush, radius, and radius run-out incl. DIA cutters - Corner copying unit 1832 up to 3 mm edge thickness incl. DIA cutter - Scraper unit 1929 with 2 scraper holders - Chip collection box - Surface scraper 1964 Minimum workpiece length (mm): 160 Workpiece thickness (mm): 6 - 45 Edge thickness (mm): 0.4 - 3 Feed speed (m/min): 10 Total length (mm): 4630 Weight (kg): 1250 Availability: short notice Location: Flörsheim

Year of construction: 2025, condition: new, Exhibition machine Year of manufacture: 2025 Location: Flörsheim Availability: by arrangement Hsdpfxjxavtwj Aacew

Condition: used, Year of construction: 1995, Used machine Year of manufacture: 1995 Features and technical data: Hsdpfxow Rhiys Aacow Cutting length: 5300 mm Cutting height: 2200 mm Max. workpiece thickness: 80 mm Motor: 5.5 kW Compressed air connection: 6 bar, 50 NL/min Extraction connection: 2 x 100 mm, 1200 m³/h Pneumatic aggregate locking Pneumatic aggregate penetration Digital horizontal display Availability: by arrangement Location: Flörsheim

Condition: used, Year of construction: 2022, Used machine Year of manufacture: 2022 Condition: as new Includes 6 months full warranty! Only 70 operating hours; the machine has not yet been used in production! Equipment and technical data: BASE MACHINE Holz-Her Processing Center DYNESTIC 7535 10.5 Lift Processing length: 3100 mm Machine frame: welded construction with ground and hardened prism guides for the gantry, aggregate head, and consoles. Gantry design. Rack-and-pinion drive, helical gears in X and Y direction, 1 precision ball screw in Z direction for accurate positioning. MATRIX TABLE Fixed, continuous processing table with grid markings and through-slots in X and Y direction, slot spacing 50 mm. Includes 25 meters of sealing cord for fixing the sacrificial plate. 1 work zone with stop rails/stops - stop height 30 mm, pneumatically retractable. 2 stop rails in Y direction and 1 stop in X direction right (as seen from the front of machine). Remote maintenance capability Hjdpfx Ajwxz Uysacjw Integrated network card for transfer of control and program data. Data transmission via high-speed internet connection. Requirement: High-speed internet connection at the machine. USB port For data backup and for directly importing processing programs at the control panel. TECHNICAL DATA Working dimensions 7535 10.5: Max. nesting table surface: X = 3100 mm, Y = 1560 mm Max. travel paths: X = 4695 mm, Y = 2305 mm, Z = 565 mm Max. machining height 7535/7735 Classic without pusher: Z = 300 mm from table top (excluding sacrificial plate) Max. pusher clearance height above table for Push/Auto/Lift versions: Z = 250 mm from table top (excluding sacrificial plate) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min MACHINE OPERATION SOFTWARE CAMPUS V7 PLUS CAD/CAM software, 1 license incl. material removal simulation BetterSim 1 software license secured via dongle for the machine CAMPUS V7 PLUS software for CNC processing centers: Consisting of: 1. CAMPUS NC-HOPS 2. CAMPUS aCADemy 3. CAMPUS MT-Manager 4. CAMPUS Workcenter V7 PLUS 5. CAMPUS 3D material removal simulation BetterSim CAMPUS NC-HOPS Graphical variant system with conversational programming and CAD/CAM features for creating part variants using macro technology. Hi-Speed USB-Device Network Server Allows use of the CAMPUS single license on the machine or a PC in the same network. Only one license may be used in the network at a time! Additionally: CAMPUS V7 PLUS CAD/CAM software, 1 license incl. material removal simulation BetterSim 1 software license secured via dongle for office or machine CAMPUS V7 PLUS software for CNC processing centers: Consisting of: 1. CAMPUS NC-HOPS 2. CAMPUS aCADemy 3. CAMPUS MT-Manager 4. CAMPUS Workcenter V7 PLUS 5. CAMPUS 3D material removal simulation BetterSim CAMPUS NC-HOPS Graphical variant system with conversational

Condition: new, Year of construction: 2025, New Machine Hsdsw Tfxwopfx Aacjw Year of manufacture: 2025 Equipment and technical specifications: - Base unit: Vertical panel saw SECTOR 1257, cutting height 2200 mm x cutting length 5300 mm - PowerPackage 400V incl. TRK extraction system, SuperCut scoring unit, digital vertical readout, stepless speed control (9 kW power) - Strip stop for repeat horizontal cuts, millimeter scale, max. strip height 650 mm - Alignment laser - Cut optimization package incl. touchscreen on operator panel Availability: Short-term Location: Flörsheim

Condition: new, Year of construction: 2023, Demo machine Year of manufacture: 2023 Equipment and technical data: Base machine 1057 XL C with Beckhoff touch-screen control Extendable workpiece support 600 mm Long infeed fence 1252 mm Jointing milling unit with 2 motors DIA jointing cutter 70 x 64 x 30 mm Z2+2, left and right rotation Edgebanding unit 1903 fully automatic Glujet 301 adhesive application system Automatic reloading function Magazine for 1.4 kg adhesive cartridges (holds 4 cartridges) GluJet collection container Pressure unit 1912-3 pneumatic Spray unit GM 201 after pressure unit End trimming unit 1918 pneumatic Extraction hoods for end trimming unit Combination milling unit FR201 with DIA cutters R=2 mm Profile trimming unit 1832 Shelf program Radius scraper ZK 301 Chip collection box Flat scraper FK 701 Spray unit front and rear TR201 Buffing unit 1940 Location: Solingen Hsdpfx Aow I Uytjacew Availability: short notice

Condition: used, Year of construction: 2001, Used machine Year of construction: 2001 Condition: Function tested Equipment and technical data: Milling aggregate 4.4 kW HSK 63 F tool holder Speed 1,000 - 18,000 rpm water-cooled Tool changer: 4-fold lateral Drilling head: 9 vertical drilling spindles in 32 mm increments Horizontal drilling spindle: 1+1 Vertical drilling spindle: 1+1 Grooving saw in X-direction Control: Twin CAm 32 Vacuum pump 40 cbm/h Incl. vacuum cups Travel distances: X-axis: 2,685 mm Y-axis: 1,095 mm Z-axis: 140 mm Weight: approx. 3,500 kg Machine is delivered complete in all mechanical, electrical and electronic components and overhauled where necessary All guides checked; console guides replaced New PC control unit for the TWIN CAM control system All axis modules checked and serviced Location: Hochheim Availability: by arrangement Hodew I Ug Hspfx Aacow

Year of construction: 1994, condition: used, Used machine Hjdpfxew I Urvs Aacew Year of manufacture: 1994 Condition: age-appropriate Equipment and technical data: Edging thickness max. 8 mm Workpiece thickness max. 60 mm Workpiece width min. 90 mm Operation via foot pedal Incl. extendable workpiece support Incl. chassis Incl. buffing unit Dimensions: approx. 700 x 600 x 1300 mm Weight: approx. 140 kg Suction nozzle: 70mm Availability: short term Location: Flörsheim

Condition: used, Year of construction: 2010, Used machine Year of manufacture: 2010 Condition: Completely overhauled, excellent! Feed speed: infinitely variable, 10-18 m/min Control unit: edge control 19 with 18.5" color touchscreen display Jointing milling unit 1802 Edge feeder 1901 Glue application station Cartridge 1906MG, with tracking nozzle and automatic glue height adjustment Hsdpfx Aasw I Uhqocew Pressure unit 1913, pneumatic End trimming unit 1918 Multifunction milling unit 1826 MOT 6 with 6 servo axes for flush, radius, and bevel milling Copy milling unit 1983 Radius scraper unit 1929 with pneumatic adjustment (retrofitted; see photo) Flat scraper 1964 Workpiece thickness: 6 - 60 mm Edge thickness: 0.4 - 8 mm Minimum workpiece width: 60 mm Shortest workpiece length: 180 mm Total length: 5195 mm Extraction connection: 180 + 80 mm, 2100 m³/h Compressed air connection: 6 bar / 327 NL/min Weight: approx. 2200 kg Availability: approx. 2-3 weeks after order confirmation Location: Flörsheim